Database Develop

xp wont recognize tilt unless its connected for ~15mins then disconnects after a few.

This is really weird. I plug my tilt into my computer (tried every USB port on the machine) and it does nothing. The tilt doesnt light up, the computer doesnt notice that anythings been plugged in. Then about 15 minutes later you get the 'bipbipbip' sound that somethings been plugged in and activesync opens and it tries to connect but can not, then after a few minutes of trying I get an error about nothing being connected and you hear disconnect sound xp makes when you remove something form the usb port. Tired reseting both the phone and pc with no change in behavior.
Any ideas?
I've tried the USB-PC switch which did not work.
-Josh

slowjett said:
This is really weird. I plug my tilt into my computer (tried every USB port on the machine) and it does nothing. The tilt doesnt light up, the computer doesnt notice that anythings been plugged in. Then about 15 minutes later you get the 'bipbipbip' sound that somethings been plugged in and activesync opens and it tries to connect but can not, then after a few minutes of trying I get an error about nothing being connected and you hear disconnect sound xp makes when you remove something form the usb port. Tired reseting both the phone and pc with no change in behavior.
Any ideas?
I've tried the USB-PC switch which did not work.
-Josh
Click to expand...
Click to collapse
it seems you're having the same problem I do ( http://forum.xda-developers.com/showthread.php?t=397840 )
USB to PC isn't working here too
I don't know if it's related, but I'm using L26 ROM. Are you using the original ROM?

Lem0nHead said:
it seems you're having the same problem I do ( http://forum.xda-developers.com/showthread.php?t=397840 )
USB to PC isn't working here too
I don't know if it's related, but I'm using L26 ROM. Are you using the original ROM?
Click to expand...
Click to collapse
yes original rom. I got it to sync over BT. Still not making me happy though.

Have you tried /Connections/USB to PC: disable advanced network functionality ?

Yes I have tried that with no difference.
But oddly enough its working now after I plugged the usb into the combo adapter I just got... now it works without it. Maybe it re-aligned a pin or something?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

slowjett said:
Yes I have tried that with no difference.
But oddly enough its working now after I plugged the usb into the combo adapter I just got... now it works without it. Maybe it re-aligned a pin or something?
Click to expand...
Click to collapse
hello
the problem keeps happening to me
don't you remember changing any other setting in the mean time?
do you use wisbar?
thanks

I think theres a batch of dodgy kaiser/tilts going round. My USB recently suffered many of the problems listed here and all over the forum. Won't connect to activesync, charges but nothing else, stuck in serial at bootloader. Tried on many pc's with many different cables, advanced USB functionality on/off, original SPL, the list goes on and on. I noticed one thing tho, the USB connector on my broken kaiser (O2 XDA stellar btw) looked different to my mates stellar. Mine had 5 holes on the front of it that lined up with the pins on the top. The one they sent me after i returned it doesn't have these holes and looks like my mates one. Ill try and get a pic of the difference.
Does yours have holes or no holes?
1st pic - with holes
2nd pic - no holes

Shub-Niggurath said:
I think theres a batch of dodgy kaiser/tilts going round. My USB recently suffered many of the problems listed here and all over the forum. Won't connect to activesync, charges but nothing else, stuck in serial at bootloader. Tried on many pc's with many different cables, advanced USB functionality on/off, original SPL, the list goes on and on. I noticed one thing tho, the USB connector on my broken kaiser (O2 XDA stellar btw) looked different to my mates stellar. Mine had 5 holes on the front of it that lined up with the pins on the top. The one they sent me after i returned it doesn't have these holes and looks like my mates one. Ill try and get a pic of the difference.
Does yours have holes or no holes?
1st pic - with holes
2nd pic - no holes
Click to expand...
Click to collapse
no holes
but it's weird because it used to work
it stopped from nothing

I guess the holes aren't it then. Mine just stopped too, nothing changed, just didn't work one day. Does yours get recognised by windows at all? Mine kept saying usb device not recognised. This was after it was plugged in for about 15 mins or so. Incidentally, my bluetooth also stopped working at the same time.

Shub-Niggurath said:
I guess the holes aren't it then. Mine just stopped too, nothing changed, just didn't work one day. Does yours get recognised by windows at all? Mine kept saying usb device not recognised. This was after it was plugged in for about 15 mins or so. Incidentally, my bluetooth also stopped working at the same time.
Click to expand...
Click to collapse
mine doesn't even says it's a not recognized device
it just doesn't really recognize anything
I mean, it's the same as if I didn't plug anything in the USB... it shows no message, do nothing
(and tytn doesn't charge... I guess you're at least charging)

Lem0nHead said:
hello
the problem keeps happening to me
don't you remember changing any other setting in the mean time?
No. But i did get it to sync over BT before it happened.
do you use wisbar?
Click to expand...
Click to collapse
Nope, using Quickmenu 2.7 or whatever its called. Great app.
Click to expand...
Click to collapse
Click to expand...
Click to collapse

Diamond freezes or TouchFlo appears to be broken

First I was afraid that my creen is broken, but it is only theTouchFlo...
did you ever see this?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It is only the TouchFlo!!! Everything else works fine!!!
Also in the last few days I had some problems with my Diamond, it always breaks down, and it never did in the last few month!
I already did a hard reset, nothing changes...
I formated the flash to prevent viruses....
Can somebody help me? Should I buy a mobile anti-virus, is that really necessary?
WHAT THE HECK IS GOING ON???
-------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------
EDIT / UPDATE / SOLUTION:
I found the solution to this problem.
Like somebody told in this thread it is a software problem!
It seams to be an error in the ROM, that even a hardreset cannot restore.
So I flashed a newer ROM to my Diamond. It was the first time I did that, so I did not really know how it works. But at the end it was really easy.
IT IS JUST IMPORTANT TO READ ALL THE NOTES before you try to flash the ROM.
I upgraded my ROM from 1.93.xxx to 2.03.xxx but it is possible to reflash the same ROM to your device.
How it works?
Just go to http://www.htc.com/www/supportdownloadlist.aspx?p_id=133&act=sd&cat=all
and download the ROM you like. At the moment there are to ROMs avaiable 1.93 and 2.03
So download the one you like (size: +- 100 MB), then READ and FOLLOW all the instructions if it is your first time.

yeah thats happened to me couple of times...it usually happens to me when i leave my diamond plugged in the charger over night...occasionally, the device freezes up or reboots over night (i know this because when i wake up, i get prompted with insert sim passcode screen)

BlackFear said:
First I was afraid that my creen is broken, but it is only theTouchFlo...
did you ever see this?
It is only the TouchFlo!!! Everything else works fine!!!
Also in the last few days I had some problems with my Diamond, it always breaks down, and it never did in the last few month!
I already did a hard reset, nothing changes...
I formated the flash to prevent viruses....
Can somebody help me? Should I buy a mobile anti-virus, is that really necessary?
WHAT THE HECK IS GOING ON???
Click to expand...
Click to collapse
I had something kind of like that except my screen output everything as if I was looking at it through a mirror, but the touch screen locations were still the same.

wow, can i have that skin?
joking, have you tried to re-flash? cool it a bit (5-10 degrees)?

http://diamond.forumotion.net/forum-f2/topic-t131.htm

I have the same problem and cannot isolate why it happens, but it is a coincident it happens when plugged in charger.
Only way I found to clear it is soft reboot

BlackFear said:
First I was afraid that my creen is broken, but it is only theTouchFlo...
did you ever see this?
It is only the TouchFlo!!! Everything else works fine!!!
Also in the last few days I had some problems with my Diamond, it always breaks down, and it never did in the last few month!
I already did a hard reset, nothing changes...
I formated the flash to prevent viruses....
Can somebody help me? Should I buy a mobile anti-virus, is that really necessary?
WHAT THE HECK IS GOING ON???
Click to expand...
Click to collapse
broke youre glas?? lol
i dont got this on my diamond..
maybe flash a new rom?

what happens if you change your wallpaper??

IMHO this is drivers...

riki1 said:
http://diamond.forumotion.net/forum-f2/topic-t131.htm
Click to expand...
Click to collapse
Nice, but erm ENGLISH ?? Cannot understand a word.
----------------------

BlackFear said:
Nice, but erm ENGLISH ?? Cannot understand a word.
----------------------
Click to expand...
Click to collapse
Strange TouchFlo ...... strange language

Yeah yeah yeah, but does anybody know what this is???

BlackFear said:
Yeah yeah yeah, but does anybody know what this is???
Click to expand...
Click to collapse
I translate it(my link) , sorry for my english :
Sometimes I need glasses for see fine (I have only 1+), but now Diamond got me
I tryed restart TouchFlo, but it not help, only soft reset help I think .
Diamond is gagger

Malik05 said:
yeah thats happened to me couple of times...it usually happens to me when i leave my diamond plugged in the charger over night...occasionally, the device freezes up or reboots over night (i know this because when i wake up, i get prompted with insert sim passcode screen)
Click to expand...
Click to collapse
i had that, sent it back to HTC and they sent me a replacement

mugglesquop said:
i had that, sent it back to HTC and they sent me a replacement
Click to expand...
Click to collapse
its just a software related issue, not hardware (at least i dont think). But it happens to me very rarely...hasnt caused any issues.

It started 1 week ago on my phone...
I installed an Anti-Virus to check, but found nothing.
I did hardreset, now my diamond freezes less often.
But what can it be? And I dont know how to install a new ROM version, or how to complet flash the ROM...
And when I sent my diamond back to HTC this takes over a month to get it back, because here in Luxembourg they are so F***ING slow!

So, this is an edit of the message above:
I updated my Touch Diamond now from ROM 1.93.xxx to 2.03.xxx
It was kinda easy, you just have to go to the HTC Homepage, then to Diamond Support and Downloads.
THEN IT IS VERY IMPORTANT TO FOLLOW ALL THE INSTRUCTIONS IF IT IS YOUR FIRST TIME, so read!
I will tell you then in a few days if it had some affections to the problems I have with my diamond!
EDIT / UPDATE 1:
The phone seams to work a bit faster with the new ROM then with the older.
GSensor Calibration is already installed on this new ROM
New Version of Google Maps
And I think a newer version of Youtube.
Although some System Updates and Internet Sharing is now in choose-list when connecting to PC

USB device not recognized

All of a sudden I started getting this error when plugging into my PC.
I booted into the bootloader (tricolor screen) and still didn't work. It charges but doesn't connect properly.
I have searched around and read a few things (disable advanced networking, take out battery for 30 mins) Nothing seems to work.
Seems like it's a device problem... any suggestions because I'm kind of screwed here.

gilligan8 said:
All of a sudden I started getting this error when plugging into my PC.
I booted into the bootloader (tricolor screen) and still didn't work. It charges but doesn't connect properly.
I have searched around and read a few things (disable advanced networking, take out battery for 30 mins) Nothing seems to work.
Seems like it's a device problem... any suggestions because I'm kind of screwed here.
Click to expand...
Click to collapse
Hit up htcwiki.com there is a solution there, I had the same problem and it sorted itself out by buying a docking station station. I also use a three adapter (3.5mm head, sync cable and headset)which also works.
If you have the same issue as me chances are that your pda does not charge when connected either.
Hope this helps

No, as stated, mine charges when plugged in... I have a cradle, but it hooks up with the same usb cable so I can't see how that would make it better... it's just essentially an extension isn't it?

Could be a glitch in the phones software, a cable going bad, a plug going bad or a windows problem.
I've gone through a few cables and a dock, something always gets bent or something and it won't sync, I just grab another cable and it works. It's a shame the dock is bad now, it will only charge.

ChumleyEX said:
Could be a glitch in the phones software, a cable going bad, a plug going bad or a windows problem.
I've gone through a few cables and a dock, something always gets bent or something and it won't sync, I just grab another cable and it works. It's a shame the dock is bad now, it will only charge.
Click to expand...
Click to collapse
+1 All of a sudden a few weeks ago, my phone stopped syncing, panic, because I flash a lot . Tried everything, the list of things to try over at htcwiki was edited by me, and nothing worked, until I changed the cable. Voila ! been working ever since.

No good... not working even on another PC with another cable... and it worked before on that setup.

Um you only have troubleshot half of it. Did you say you reset the phone? LOL oh yeah my phone never worked on the original cable. Just because something was cool for one minute doesnt' mean it won't **** up the next.
Hard reset the phone. If that doesnt' work, than you are one step closer to a broken phone.
Have fun lol.

gilligan8 said:
All of a sudden I started getting this error when plugging into my PC.
I booted into the bootloader (tricolor screen) and still didn't work. It charges but doesn't connect properly.
I have searched around and read a few things (disable advanced networking, take out battery for 30 mins) Nothing seems to work.
Seems like it's a device problem... any suggestions because I'm kind of screwed here.
Click to expand...
Click to collapse
Try here it may help ...

Found my problem in the last post (second to last post now )
My 2nd pin (closest to the middle) was laying flat and didn't have the curve the others had.. so it wasn't making contact. I used a caligraphy pen to get under it and pop it back up and now it works... I'm sure I'll have to keep an eye on it but for now it's working.
Hope this helps others that are reading everyone saying "it's the cable" and that isn't your problem
Thanks for all the suggestions, it had to be one of them!

ChumleyEX said:
Could be a glitch in the phones software, a cable going bad, a plug going bad or a windows problem.
I've gone through a few cables and a dock, something always gets bent or something and it won't sync, I just grab another cable and it works. It's a shame the dock is bad now, it will only charge.
Click to expand...
Click to collapse
Like I said, it could be the port. booya

Well, you did mention everything except for solar flares.

denco7 said:
+1 All of a sudden a few weeks ago, my phone stopped syncing, panic, because I flash a lot . Tried everything, the list of things to try over at htcwiki was edited by me, and nothing worked, until I changed the cable. Voila ! been working ever since.
Click to expand...
Click to collapse
Which OS on your comp. are you using Denco? I've been using vista with no problems until now and it's more than funny how this syncing issue has just been popping up all over (most likely from vista updates). First instinct with vista is updates and firewall; killed and accepted every option, still with no dice. I seriously doubt it's the cables since they worked just fine for the last several hundred syncs and now sync problems abound...any help would be appreciated brother

gilligan8 said:
Found my problem in the last post (second to last post now )
My 2nd pin (closest to the middle) was laying flat and didn't have the curve the others had.. so it wasn't making contact. I used a caligraphy pen to get under it and pop it back up and now it works... I'm sure I'll have to keep an eye on it but for now it's working.
Hope this helps others that are reading everyone saying "it's the cable" and that isn't your problem
Thanks for all the suggestions, it had to be one of them!
Click to expand...
Click to collapse
WTF?! That fixed it?

hmmm, I smell something fishy...so many people having issues with connecting at the same time...upgrade to newest devices? This war with Wm and Apple makes me want to get a simple razr; tired of all this bull****

gilligan8 said:
Well, you did mention everything except for solar flares.
Click to expand...
Click to collapse
I kept silent out my internal dignity

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Everyone knows USB is shielded for solar flares.
GOSH!!!!

kaalgoosy said:
WTF?! That fixed it?
Click to expand...
Click to collapse
Yep... that pin is half of the data (1st pin is ground, last is power and two in the middle are data)... obviously ground and power are working as it charged, but if one of the data lines isn't making contact then the PC is going to be confused because it knows something is there just not getting enough info.

I tried everything, straightened my pins, shut off firewalls and security, I use Windows Xp running with Bootcamp on an iMac. I have never installed service pack 3, because I read that , that was a problem with syncing. Shut off advanced network functionality, everything I could think of.
I had sync'd a thousand times with that cable, and flashed at least one hundred roms. Then one day it just stopped syncing. After pulling my hair out for two days, trying everything, I pulled a new cable out of the overflowing cable draw, fixed, haven't had a problem since. Go figure !

denco7 said:
I tried everything, straightened my pins, shut off firewalls and security, I use Windows Xp running with Bootcamp on an iMac. I have never installed service pack 3, because I read that , that was a problem with syncing. Shut off advanced network functionality, everything I could think of.
I had sync'd a thousand times with that cable, and flashed at least one hundred roms. Then one day it just stopped syncing. After pulling my hair out for two days, trying everything, I pulled a new cable out of the overflowing cable draw, fixed, haven't had a problem since. Go figure !
Click to expand...
Click to collapse
HUh, It seems you might be right about a simple cable replacement. My previous cable synced me up for several hundred syncs and just crapped out one day; dug up one of my older cables and it synced just fine and now it just took a dive for charging but not syncing. Guess I'll have to hit Best Buy for a new one. Like you said; go figure. Although I noticed some new gray hairs sprouting from searching and tweaking for fix

Buy online.... Best Buy RAPES you on cables!

"use genuine battery" message

Hi there,
I've been using CM all the time, but now I decided to switch back to stock rom.
I installed everything properly but after boot up, I got the message "use genuine battery" and the phone shuts down.
Of course I am using my original battery that was in the package.
I tried without success:
- pressing PowerOn-button for 20 seconds when battery unplugged
- cleaning battery contacts with nail polisher
By googling I found this advise that shoud fix the problem:
Many LG Models have a common error of saying Use Genuine Battery then powering off. This is a very common and fixable issue. please understand that this method will most on most LG phones but does exclude the 8100 and older models, and the exact location of the items you'll be looking for in programming will vary model to model.
If you encounter this error you can attempt to correct the phone if you have another battery for the phone that will power the handset up.
Install the battery that is working
Type in: ##LGSERVICEMENU send (##5473784296368) on the dialpad.
enter the security code: 000000
locate: SW/HW Tests or HW test or SW/HW Versions
once you locate and select the correct field you need to find "bypass booting"
in this menu you need to locate fake battery mode select it and choose on.
Your LG will now work with any battery that fits into the phone.
Click to expand...
Click to collapse
I tried this and borrowed a battery from a friend. With this battery everthing worked fine. But unfortunately the service-menu as described by typing ##5473784296368 didnt work on my 4xHD. Instead I tried the hidden menu 3845#*880#. But there I wasn't able to find anything like "fake battery" or so.
Does anybody know where this menu point could be?
My phone is too old so I wont get a new battery from LG Service.
thanks in advance :good:

Try this number: 3845#*880# maby is that option in this menu
Sent from my LG-P880 using xda app-developers app

noppoer2 said:
Try this number: 3845#*880# maby is that option in this menu
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
hello read what he said:
I tried this and borrowed a battery from a friend. With this battery everthing worked fine. But unfortunately the service-menu as described by typing ##5473784296368 didnt work on my 4xHD. Instead I tried the hidden menu 3845#*880#. But there I wasn't able to find anything like "fake battery" or so.
Ok @eFCiKay maybe you should enter in recovery and wipe all partitions, this would be fix that problem.
If i was right please hit the thanks button
Have a nice day!

Allex42HD said:
hello read what he said:
I tried this and borrowed a battery from a friend. With this battery everthing worked fine. But unfortunately the service-menu as described by typing ##5473784296368 didnt work on my 4xHD. Instead I tried the hidden menu 3845#*880#. But there I wasn't able to find anything like "fake battery" or so.
Ok @eFCiKay maybe you should enter in recovery and wipe all partitions, this would be fix that problem.
If i was right please hit the thanks button
Have a nice day!
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Did you SERIOUSLY just recommend that the OP simply wipe all partitions in order to fix a battery problem? Really? I guess he'd be so pi$$ed off at no longer having a phone which would boot that he would no longer notice the battery problem?
If this is the level of your advice to help people out then I suggest you stop bashing on your keyboard and find something else to do with your time instead.
And to top it all off you beg for thanks at the bottom of your post

thanks for all answers
of course I would have been aware of, that in case I'd wipe all partitions, I need to reflash recovery and rom.
But could this really fix the problem?
I even tried another baseband (v10h and v20a)

Just re-read your first post properly.
You have been using CM with no issues, but when you went back to Stock this started happening? What Stock have you gone back to? Given that, I'd be tempted to do a full KDZ reflash and see if that makes any difference as it's possible something has gone wrong when you've reflashed.
Although, if I read right, you used a friend's battery with no problems? Just buy an OEM battery from eBay and see if that fixes it.

SimonTS said:
I'd be tempted to do a full KDZ reflash
Click to expand...
Click to collapse
how would you do it? (to be sure everything else than stock has been wiped...)
this way?
http://forum.xda-developers.com/showthread.php?t=2179126

eFCiKay said:
how would you do it? (to be sure everything else than stock has been wiped...)
this way?
http://forum.xda-developers.com/showthread.php?t=2179126
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=35971349
With pictures and everything, this guide works perfectly if you follow the instructions.

tanks for all your help, but unfortunately flashing via this method didnt work either. same message at startup...
I gonna buy a new battery

eFCiKay said:
tanks for all your help, but unfortunately flashing via this method didnt work either. same message at startup...
I gonna buy a new battery
Click to expand...
Click to collapse
pfffff..... that it's a problem, you should charge your battery with a phone battery charger device and when it's fully charged or 80% put the battery on the phone plug the usb on the phone press down volume button and plug the usb to your computer (you will need to have phone driver installed)
and flash the fw with kdz.
just give one more chance to your battery!

Fix Maybe?
Hello,
Sorry to bring up an old thread, but just for information in case anyone else comes over this issue and end up on this thread.
I found with my p880 that one of the battery prongs on the phone was bent in so that it didn't attach properly to the battery connection.
I got a pin and hooked it underneath, then pull the pin slightly out which brought it back in line with the others.
I then got cleaning alcohol, I used isopropyl, to clean all the contacts.
After doing this I found the error message went away and the phone works as it should.
Hope this helps someone else with the problem.
Regards,
Monkey

Mi5pro hardbrick

Hey
My phone just died in my hands and now doesn't want to boot in any mode.
I searched a solution already on the internet, I tried the testpoint method, I succeed to make my computer and miflash recognizing my phone but when I'm launching the flash, it always fails (I tried a few times).
I used different versions of miflash (even the beta one) and different rom (global/china stable).
Miflash is sometimes missing hello packets, sometimes going further with "0x8000ffff: Send configure command" or even worst as in these screens..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What can I do now?
Oh, and I'm on windows 10 64 bits

Are you able to get into fastboot and can you detect it using the fastboot cli?
Sent from my MI 5 using Tapatalk

andythedev said:
Are you able to get into fastboot and can you detect it using the fastboot cli?
Sent from my MI 5 using Tapatalk
Click to expand...
Click to collapse
No fastboot, no recovery, no boot at all..
(and btw I don't even know what is fastboot cli)

Is you phone in qualcom 9008 detect on driver manager?

labolong03 said:
Is you phone in qualcom 9008 detect on driver manager?
Click to expand...
Click to collapse
Yes, driver manager says "Qualcomm HS-USB QDLoader 9008"

Tried running miflash as administrator?
(Right click and then "run as administrator")

SN22 said:
Tried running miflash as administrator?
(Right click and then "run as administrator")
Click to expand...
Click to collapse
Yes, I tried already, nothing change..
But for the 2 screens, internet says that it happens and that I have to use the 2015.10.28 version but when I do, I still got the "send configure command" fail..
Here is a screen:

Try using a different:
1. Cable
2. USB port (rear port is recommend)
3. Computer.
It helped me a lot with stupid errors in miflash

SN22 said:
Try using a different:
1. Cable
2. USB port (rear port is recommend)
3. Computer.
It helped me a lot with stupid errors in miflash
Click to expand...
Click to collapse
Already did (and tried again to be sure) but nothing changed

I think your mobo just died... Or at least, try with a DIY deep flash cable

Some people have solved it by disarming the smartphone, disconnecting the battery and reconnecting it
Enviado desde mi MI 5 mediante Tapatalk

dafervs said:
Some people have solved it by disarming the smartphone, disconnecting the battery and reconnecting it
Click to expand...
Click to collapse
Tried already, nothing happened
lukypuie said:
I think your mobo just died... Or at least, try with a DIY deep flash cable
Click to expand...
Click to collapse
I tried so many things that I think it died too..
But it is weird, it died so fast, I got the phone less than a year ago..
Oh and 1-2 weeks before it died, my phone had some big freeze screen when I was trying to access to my pictures and I had to long press power button to make it restart. My mi5 died during one of these freezes, that's why I didn't think firstly that it was an hardware bug..
So I think that I'll send it back to the seller (but I don't even know if the free warranty covers motherboard death..

Heckaa said:
Tried already, nothing happened
I tried so many things that I think it died too..
But it is weird, it died so fast, I got the phone less than a year ago..
Oh and 1-2 weeks before it died, my phone had some big freeze screen when I was trying to access to my pictures and I had to long press power button to make it restart. My mi5 died during one of these freezes, that's why I didn't think firstly that it was an hardware bug..
So I think that I'll send it back to the seller (but I don't even know if the free warranty covers motherboard death..
Click to expand...
Click to collapse
Why shouldn't it? If you bought the phone from a china seller, you will have a 1y warranty

memory chip died

lukypuie said:
Why shouldn't it? If you bought the phone from a china seller, you will have a 1y warranty
Click to expand...
Click to collapse
Oh, nice then, I didn't know so I'll just send it back.
Do you think that I could recover my internal storage after that or not?
Thanks to all who have tried to help me with this problem

Motherboard is dead . A common problem whit mi5

fkloznica said:
Motherboard is dead . A common problem whit mi5
Click to expand...
Click to collapse
It is a "common problem" and everyone is fine with that? xD

Heckaa said:
It is a "common problem" and everyone is fine with that? xD
Click to expand...
Click to collapse
its a well know problem....let the phone sit for a day untill led flashes red or phone is completely dead and then plug into a good charger and itll come to life

Heckaa said:
It is a "common problem" and everyone is fine with that? xD
Click to expand...
Click to collapse
http://4pda.ru/forum/index.php?showtopic=742554&st=4680
Use Google translate.