Related
After installing Vanir, I don't know what went wrong !!! it was freezing then after trying to charge it, it bricked!!!!
I searched the forume and found major two ways
FIRST
RuedasLucas Here :
http://forum.xda-developers.com/showthread.php?t=1932123
i followed the info. correctly and stuck in the same problem the man in the thread have, I am stuck in LG logo
so i tied the second
http://forum.xda-developers.com/showpost.php?p=40174748&postcount=9&nocache=1
and i am stuck in installing " LGmobile Support Tool " because i am in windows 8 and it is not compitable with it. every time trying to install it seems not responding.
so i am stuck now and donot know how to unbrick it !!! no one tell me to set up win 7 because i donot have one
The LG support tool works fine on my Windows 8 64-bit version. Look for the thread on 'Flashing a KDZ with pictures' and follow it to the letter.
did u install gapps ? vanir installation never had a problem. about windows 8 x64 i can confirm the support tool is working because i had them some months ago ( now im on ubuntu x64 ).
and its not a good idea if on some little mistake u try go back to stock. the reason u tried flash vanir was to go away from stock. if u flash back to stock then in a few days will want to flash again a custom. so try again and do it right !
also dont take off battery. no need. maybe this battery trick is history. i never did that. i just long pressed power to reboot and then i just pressed a few times the vol down ( not hold ).
SimonTS said:
The LG support tool works fine on my Windows 8 64-bit version. Look for the thread on 'Flashing a KDZ with pictures' and follow it to the letter.
Click to expand...
Click to collapse
Actually i did this before posting from that thread
http://forum.xda-developers.com/showthread.php?t=2069723
between step 3 and 4 it give me " app. not responding "
kessaras said:
did u install gapps ? vanir installation never had a problem. about windows 8 x64 i can confirm the support tool is working because i had them some months ago ( now im on ubuntu x64 ).
and its not a good idea if on some little mistake u try go back to stock. the reason u tried flash vanir was to go away from stock. if u flash back to stock then in a few days will want to flash again a custom. so try again and do it right !
also dont take off battery. no need. maybe this battery trick is history. i never did that. i just long pressed power to reboot and then i just pressed a few times the vol down ( not hold ).
Click to expand...
Click to collapse
i didn't catch it. But if u mean i reflash vanir, The mobile is " dead now !!!! " so i must unbrick to any firmware then reflash
arrivals18 said:
Actually i did this before posting from that thread
http://forum.xda-developers.com/showthread.php?t=2069723
between step 3 and 4 it give me " app. not responding "
Click to expand...
Click to collapse
Try disabling any anti-virus first just to make sure that's not interfering. I've never heard of the proces freezing there before.
SimonTS said:
Try disabling any anti-virus first just to make sure that's not interfering. I've never heard of the proces freezing there before.
Click to expand...
Click to collapse
Ok is the tool take some time to load if internet connection is not good ?!!
arrivals18 said:
Ok is the tool take some time to load if internet connection is not good ?!!
Click to expand...
Click to collapse
It shouldn't make any real difference, no.
arrivals18 said:
Actually i did this before posting from that thread
http://forum.xda-developers.com/showthread.php?t=2069723
between step 3 and 4 it give me " app. not responding "
Click to expand...
Click to collapse
You did disable the Modem, right? And sometimes, the process seems to take a little long. You have to be patient.
Sent from my Optimus 4X HD using XDA Premium 4 mobile app
arrivals18 said:
i didn't catch it. But if u mean i reflash vanir, The mobile is " dead now !!!! " so i must unbrick to any firmware then reflash
Click to expand...
Click to collapse
mmmmmm.... if at the end u cant do anything and since, propably, your bootloader is unlocked , u can reinstall the recovery using the adb ( use cmd: adb reboot bootloader and then, when u are there , hit: adb install [recovery zip file path/name] ). eh the rest u know them so u dont need to use any kdz and tire urself with that boring procedure
SimonTS said:
It shouldn't make any real difference, no.
Click to expand...
Click to collapse
Ok i already installed win. 7 and installed the tool that take really short time.
i connect the phone to usb in the mode and choose in the tool " recover from wrong update " it downloaded nearly 573 mb. and installed it in the phone, and when the phone restarts, the phone sticks in LG logo . SO what now !!!!!!!
[email protected] said:
You did disable the Modem, right? And sometimes, the process seems to take a little long. You have to be patient.
Yep. every thing ok as u see.
Sent from my Optimus 4X HD using XDA Premium 4 mobile app
Click to expand...
Click to collapse
kessaras said:
mmmmmm.... if at the end u cant do anything and since, probably, your bootloader is unlocked , u can re-install the recovery using the adb ( use cmd: adb reboot bootloader and then, when u are there , hit: adb install [recovery zip file path/name] ). eh the rest u know them so u dont need to use any kdz and tire urself with that boring procedure
Click to expand...
Click to collapse
Yep. This may happened, when i opened the bootloader i use the code 3845#*880#>Boatloader>check boatloader> Unlock,
soi knew that it's unlocked. Am i wrong ? Guys i done both the first and the second method and all stuck in LG logo
in the first i used V20C_00.kdz and did the rights steps and also stuck !!!! so what now !!!!!!!!!!!!!!11
arrivals18 said:
Ok i already installed win. 7 and installed the tool that take really short time.
i connect the phone to usb in the mode and choose in the tool " recover from wrong update " it downloaded nearly 573 mb. and installed it in the phone, and when the phone restarts, the phone sticks in LG logo . SO what now !!!!!!!
Yep. This may happened, when i opened the bootloader i use the code 3845#*880#>Boatloader>check boatloader> Unlock,
soi knew that it's unlocked. Am i wrong ? Guys i done both the first and the second method and all stuck in LG logo
in the first i used V20C_00.kdz and did the rights steps and also stuck !!!! so what now !!!!!!!!!!!!!!11
Click to expand...
Click to collapse
Try to flash V20A with LG Flash Tool and to unlock the bootloader this:
http://www.4shared.com/rar/HFf4newq/LGO4X-UNLOCK-BOOTLOADER.html
Hope it helps, I unlock mine with that, tooked me a few tries...
arrivals18 said:
Ok i already installed win. 7 and installed the tool that take really short time.
i connect the phone to usb in the mode and choose in the tool " recover from wrong update " it downloaded nearly 573 mb. and installed it in the phone, and when the phone restarts, the phone sticks in LG logo . SO what now !!!!!!!
Click to expand...
Click to collapse
The first thing to do if it sticks on the LG Logo is to boot into the LG recovery and do a factory reset - just to make sure. You often have to do this after flashing a new KDZ anyway.
RuedasLocas said:
Try to flash V20A with LG Flash Tool and to unlock the bootloader this:
http://www.4shared.com/rar/HFf4newq/LGO4X-UNLOCK-BOOTLOADER.html
Hope it helps, I unlock mine with that, tooked me a few tries...
Click to expand...
Click to collapse
OK look what i did :
1- connect device with usb cable and holding vol- till it get s/w update
2-when pressing adb reboot bootloader command it gives me unknown error
3- fastboot oem unlock : it gives me device not found
Also tried :
1- connect device to usb cable with holding power+ vol+ to recover mode
2-when pressing adb reboot bootloader command its ok
3- fastboot oem unlock : it gives me FAILED (command write failed (Unknown error))
finished. total time: 0.587s
SimonTS said:
The first thing to do if it sticks on the LG Logo is to boot into the LG recovery and do a factory reset - just to make sure. You often have to do this after flashing a new KDZ anyway.
Click to expand...
Click to collapse
HOW ?!!!!!!!!
when pressing power with vol+ it gives me the message " This mode is for data backup at service center. After removing and reattachment of battery press power key to reboot and keep using phone" so what how can wipe date/factory reset ?
Power and vol-, not+
Flying_Bear said:
Power and vol-, not+
Click to expand...
Click to collapse
yep yep yep it's done and now i see the rom >>> now can i root unlock bootloader flash to vanir or not ?
arrivals18 said:
yep yep yep it's done and now i see the rom >>> now can i root unlock bootloader flash to vanir or not ?
Click to expand...
Click to collapse
i told you earlier at my post here , that you dont need to flash kdz and go back to stock if ur final goal is a custom rom. u could reinstall recovery using adb bootloader. nevermind -_- u just do things harder for u. bootloader is unlocked u cant unlock the unlocked. bootloader isnt locking again when u just force the stock rom in. there is another procedure u must do to lock it. u can install recovery ( if u havent ) and just install a custom rom
EDIT: you dont need this anymore but ill explain.
adb is used to force files into the device. its a way to communicate with the phone using the pc. u can use the adb to install whatever u like but if u are not sure that the thing u are trying to install is ok for the device, then u will have a problem.
so , since your bootloader is already unlocked, you can go in adb bootloader and force the recovery in.
open cmd:
Lets say i use the teamwin recovery. ill rename it to be easy and save it to desktop. my file is: recovery.zip
open cmd as administrator and go to desktop: cd .....[path to ur desktop]
1. adb start-server
2. adb reboot bootloader
3. fastboot fash recovery recovery.zip
thats it. 3 commands is 10 seconds work. u dont need to go back to stock rom to install a custom rom.
Hi, i have tried to remove my root and unlocked bootloader as I didnt think they were correctly installed in the first place. Also I wanted to install a new oem update that it keep reminding me of in the background. So now after doing alot of things found in forums and youtube I have come to an end point were the phone just comes to the bootscreen, "your devise has been unlocked and cant be trusted." from here it is just stuck with the "your devise is now booting..." then nothing happens so I realy need help now, otherwise I will have to buy a new phone within the next days.. I cant still get into the twrp and format/wipe data etc, so is it something in here I need to fix then?
Anyone that can please help me out a bit?
Regards Kristoffer
I'm having the same issue. I am unable to flash a custom rom or an official rom. One issue I am having is that I can not relock the bootloader as I get an command not allowed. Please can someone help with this issue.
Thanks
Sent from my SM-G928F using Tapatalk
I have the same issue try to flash stock ROM 182 and latter or directly 132, is important to flash 132 BCS is the only really complete rom
Luigi Ra said:
I have the same issue try to flash stock ROM 182 and latter or directly 132, is important to flash 132 BCS is the only really complete rom
Click to expand...
Click to collapse
But I cant get into the twrp anymore, only the fastboot and recue mode and the huawei erecovery mode, and in this the wifi just gives me failed to download the package or something like that.... ://
I managed to get in recovery by running the oem unlock. The problem I have is that I am unable to lock the bootloader again.
I really want to get the phone working again. I don't want to have to send the device to a Huawei Service Centre since the bootloader has been unlocked.
I really hope someone can help us all get the device back to stock firmware.
Thanks
How did you get to the recovery mode? I cant get to the twrp anymore, i think i did something wrong and wiped data or formated it so now i can only se bootup screen, or huawei logo or get to fastboot and rescue mode. There it says phone unlocked and frp (or something) in green letters lock....? And also the huawei erecovery which i cant do anything in...
I run fastboot oem unlock and flashed twrp using fastboot.
I have managed to flash update.app, Default_hw.app, Default_normal.app and Default_eu.app using an app called DC Phoenix, but now when the phone boots it goes in to eRecovery and the touchscreen doesn't work. Even when I flash twrp again the touchscreen still doesn't work.
Please can someone advise what to do to get the touchscreen and the other phone back to normal.
Thanks
Were i find a link for step by step rooting my huawei p9 lite. I have company from amateurs pretty good ones. So i cant make mistakes. Thnx for the help...rock the world wild and free whopppaaa
yesterday im trying to unroot my gr3 2017/p8 lite 2017 and i successfully unroot it using a flashable zip file i dont remember
that thread here in xda also.. after unrooting my phone i decided to relocked it using my flash oem relock unlock codes
after entering that codes it prompts saying would you like to relocked blah blah and i tick yes and boom it relocks after booting bam my phone stock in eRecovery i tried everything volume up plus power button all ways of button tricks and still im stock in eRECOVERY EMUI please somebody help me i think my OS also disappear even my twrp disappear.. please help me
arthro1987 said:
yesterday im trying to unroot my gr3 2017/p8 lite 2017 and i successfully unroot it using a flashable zip file i dont remember
that thread here in xda also.. after unrooting my phone i decided to relocked it using my flash oem relock unlock codes
after entering that codes it prompts saying would you like to relocked blah blah and i tick yes and boom it relocks after booting bam my phone stock in eRecovery i tried everything volume up plus power button all ways of button tricks and still im stock in eRECOVERY EMUI please somebody help me i think my OS also disappear even my twrp disappear.. please help me
Click to expand...
Click to collapse
Relock your phone again. Flash now the stock recovery. Then it's alright.
i think you didnt understand what im saying bro. i unroot and relocked already after relocking my phone got stock in eRecovery and i cant get out even unlocking again etc. still im stock
To complete your initial operation, you need the recovery. From your description, I see you had TWRP before. That will not do. Flashing in the bootloader you can only unlock with OEM. So, relock, recovery flash and then lock again.
ChinHon said:
To complete your initial operation, you need the recovery. From your description, I see you had TWRP before. That will not do. Flashing in the bootloader you can only unlock with OEM. So, relock, recovery flash and then lock again.
Click to expand...
Click to collapse
yes your right after relocking my phone i lost my twrp.. thats the time im stock in eRecovery... did you mean that i will unlock it again? not relock cause it is already relocked sir.. i will unlock it again to flash and then lock it again? the question is how? i already put my code to unlock my phone again but it doesn't work anymore cause i cant flash using adb fastboot anymore.. adb fastboot cant read my phone since i relocked.. sorr for my bad english.. i hope you understand what im saying..
My English is also not better. I understand you. Have you ever tried the device with key combi in the recovery to start, without usb cable? Separated from pc and charger?
ChinHon said:
My English is also not better. I understand you. Have you ever tried the device with key combi in the recovery to start, without usb cable? Separated from pc and charger?
Click to expand...
Click to collapse
how sir? i dont get what you mean... can you please show me a tutorial?
So I wrote it in my root tutorial:
Button combinations:
Fastboot Mode: Vol.- and Power with PC connection
Recovery: Vol. + and Power without PC connection
eRecovery: Vol. + and Power with PC connection
All system reboots always without PC connection.
Without PC connection means that the cable from the PRA is separated, only from the PC is not sufficient.
ChinHon said:
So I wrote it in my root tutorial:
Button combinations:
Fastboot Mode: Vol.- and Power with PC connection
Recovery: Vol. + and Power without PC connection
eRecovery: Vol. + and Power with PC connection
All system reboots always without PC connection.
Without PC connection means that the cable from the PRA is separated, only from the PC is not sufficient.
Click to expand...
Click to collapse
i tried it all sir fastboot mode is working but cant read my phone in adb fastboot tool
vol. up plus power button is the same it still stock on eRecovery when booting.. is my phone dead already??
With the PC program "DC Phönix" you can save it again. Unfortunately I do not know about it. Google knows more.
ChinHon said:
With the PC program "DC Phönix" you can save it again. Unfortunately I do not know about it. Google knows more.
Click to expand...
Click to collapse
i hope someone will help me with that... thanks bro for your help
i need your help here guys please help me recover my phone
Unlock again from bootloader and flash a TWRP Backup from xda thread
'
Hi !
I bought in January the nice P8 Lite 2017 and received a PRA-LX1C432 (dual sim europe no carrier).
It was with Android 7.0 and EMUI 5.0 and i wanted to root it.
I did it well, and was with the firmware PRA-LXA1C432B182 in stock and rooted with the tuto from this thread
https://forum.xda-developers.com/p8...ck-rom-huawei-prague-pra-xxxc432b182-t3727816
and uninstalled TWRP to put back stock recovery.
Later, I wanted to unroot my phone, and that's where things went wrong. I tried to do it with the superSU option and after a hard reset it was working and not rooted, but i'd still have the message "this phone can't be trust" so i tried to relock the bootloader and it did hard reset the phone again and now, i'm stuck with a phone that can send sms or go through the internet with LTE, but can't access fm, camera, google music, nfc is going on and off, calls don't work, etc... In dev options, Allow OEM unlock is greyed and I can't change anything. Phone is recognized by computer and I can acces memory of the phone.
I can hard reset it won't change, i ca also accessFastboot, or recovery or eRecovery, but in Fastboot mode it says "PHONE Unlock FRP Lock" and from my computer i can't do anything : if i try to flash twrp with fastboot command, i have the message "FAILED remote the command is not allowed", if i try to lock/unlock/relock bootloader it says "FAILED remote root type is risk".
Clearly, I don't know what to do. I'm used with rooting/unrooting smartphones from different brands (Samsung, LG, Sony, Huawei...), even though i'm far from being a master, and using Fastboot/ADB commands, but... I don't know.
If someone has any idea, I'm taking. I'm thinking about dload method but, of cooourse, I do NOT have a sdcard, so it's the last thing i would have tried from all i have seen on xda and elsewhere.
Thanks for reading and taking time to answer and help me, and sorry for not perfect english, i'm french but trying my best !
Run a eRecovery restore , it restore the entire smartphone to stock and also lock bootloader. Idk if this can solve your problems but i had ur same problem a days ago and i restored my phone enterely.
Fr0nK said:
Run a eRecovery restore , it restore the entire smartphone to stock and also lock bootloader. Idk if this can solve your problems but i had ur same problem a days ago and i restored my phone enterely.
Click to expand...
Click to collapse
I can't, it says that it can not get package infos from server. :/
MrCrumble34 said:
I can't, it says that it can not get package infos from server. :/
Click to expand...
Click to collapse
If you have twrp or if you can install it in someway , i can provide to you and ominfo.img to flash via twrp in ominfo partition to restore and remove package info error.
Fr0nK said:
If you have twrp or if you can install it in someway , i can provide to you and ominfo.img to flash via twrp in ominfo partition to restore and remove package info error.
Click to expand...
Click to collapse
TWRP is not installed, and I can't flash it in any way. Fastboot says "FAILED (remote : command not allowed)" if I try flashing recovery or system or anything. It also says "FAILED (remote : root type is risk) if I try to lock/unlock/relock the bootloader.
Ok, I'm actually trying something. I plugged the phone into my computer, and HiSuite told there was an update available for my phone, so I just clicked on it. It's doing right now, I will edit my post after it has finished (for good or bad).
EDIT : Ok, si it did work ! My phone is now on PRA-LX1C432B194, everything is working, not rooted. I relocked the bootloader with Fastboot, the command did work (guess I can root it again if I need now). But I think I'll leave it like that ^^'
Allow OEM unlock isn't greyed anymore, I came back to the original state of my phone but with an update not (yet) available in my country, no more "Device can't be trusted" message. Like if nothing had ever happened (expect it will be written PHONE Relocked).
This phone is really sensitive, haha^^
But as anyway I made it
Thanks anyway for trying to help !
hello everybody ,, if anyone facing as same my problem
ulocked bootloader and rooted then i received notification for android Pie Update
so i did it but after restart it went to bootloop for 1 hour amd still same problem , any ideas please ?
I had same problem, with MiFlash I put 9.6.10.0 and updated to 9.6.17.0
Pretty happy with this software, stable and everything works. Stay away from Pie, a lot of bugs.
Sent from my Mi A2 using Tapatalk
I had to factory reset
I had same problem. Any solution?
Odesláno z mého X52X pomocí Tapatalk
Cocagy said:
hello everybody ,, if anyone facing as same my problem
ulocked bootloader and rooted then i received notification for android Pie Update
so i did it but after restart it went to bootloop for 1 hour amd still same problem , any ideas please ?
Click to expand...
Click to collapse
If you have unlocked bootloader try with fastboot file & Mi flash tool
http://en.miui.com/download-353.html
Read Method 2: Fastboot : http://en.miui.com/a-234.html
you have to go V9.6.16.0.ODIMIFE (Android O) & after if you want update to 9.6.17 etc...
Factory Reset can not do anything in this case
[Or try with edl mode... https://in.c.mi.com/thread-37902-1-0.html
https://forum.xda-developers.com/showpost.php?p=77327325&postcount=2 ] it is not easy but can be save the device
sry for english
I tried many ways with different roms but nothing worked and bootloader locked at the end .. so i had to reset and install full rom ..anyway there wasn't important data .. thanks for your help
@ i have another question
I installed pie 10.0.2 is there patched boot for magisk and how to enable camera 2 api ..
Cocagy said:
I tried many ways with different roms but nothing worked and bootloader locked at the end .. so i had to reset and install full rom ..anyway there wasn't important data .. thanks for your help
@ i have another question
I installed pie 10.0.2 is there patched boot for magisk and how to enable camera 2 api ..
Click to expand...
Click to collapse
https://forum.xda-developers.com/mi-a2/how-to/xiaomi-mi-a2-android-9-pie-update-t3868101
see & here : https://forum.xda-developers.com/mi-a2/how-to
Cocagy said:
I tried many ways with different roms but nothing worked and bootloader locked at the end .. so i had to reset and install full rom ..anyway there wasn't important data .. thanks for your help
@ i have another question
I installed pie 10.0.2 is there patched boot for magisk and how to enable camera 2 api ..
Click to expand...
Click to collapse
Can you explain to me how you did to reset everything thank you
Pouvez vous m'expliquer comment vous avez fait pour tout réinitialisier merci
papavegan said:
Can you explain to me how you did to reset everything thank you
Pouvez vous m'expliquer comment vous avez fait pour tout réinitialisier merci
Click to expand...
Click to collapse
I downloaded the official rom from miui 8.1 then flashed it with miflasher then i upgraded it via ota , flashed patched boot for 10.0.1 and made some commands to enable camera 2api for gcam v 6+
Cocagy said:
I downloaded the official rom from miui 8.1 then flashed it with miflasher then i upgraded it via ota , flashed patched boot for 10.0.1 and made some commands to enable camera 2api for gcam v 6+
Click to expand...
Click to collapse
I am in the same situation, but instead of a bootloop, it just gets stuck in the "androidone" screen.
I can access fastboot, but not recovery menu. And of course the bootloader is locked. So I do not even now how to do the factory reset... or flash the official rom... (It always says not possible in lock state from fast boot).
Any help/specific instructions would be appreciated.
Thanks in advance
salchi13 said:
I am in the same situation, but instead of a bootloop, it just gets stuck in the "androidone" screen.
I can access fastboot, but not recovery menu. And of course the bootloader is locked. So I do not even now how to do the factory reset... or flash the official rom... (It always says not possible in lock state from fast boot).
Any help/specific instructions would be appreciated.
Thanks in advance
Click to expand...
Click to collapse
it seems like boot issue ..
If the data in storage not important you can unlock bootloader and it will force you to factory reset
If still same problem then you should flash thought miflasher and download official rom and flash it
Cocagy said:
I downloaded the official rom from miui 8.1 then flashed it with miflasher then i upgraded it via ota , flashed patched boot for 10.0.1 and made some commands to enable camera 2api for gcam v 6+
Click to expand...
Click to collapse
Cocagy said:
it seems like boot issue ..
If the data in storage not important you can unlock bootloader and it will force you to factory reset
If still same problem then you should flash thought miflasher and download official rom and flash it
Click to expand...
Click to collapse
Thanks, at this point I don´t even care about the data... and most of it is backed up.
The problem is that I had not selected the OEM unlock option, the command fasboot oem unlock does not work, and the miflash_unlock tool tells my that my account is not valid to unlock the phone. So I do not really know how to unlock the bootloader. Do you know if there is another way to unlock it/flash, that does not require opening the phone?
Context:
en.miui.com-thread-4697442-1-1
en.miui.com-thread-3560322-1-1
Thanks
For me the problem seems to be related to magisk, once I restored the original boot.img, the phone boots. If I try to flash the magisk patched boot image, it returns to bootloop. I'm using magisk v18 btw. I'm unable to get root using magisk on this PIE version
salchi13 said:
Thanks, at this point I don´t even care about the data... and most of it is backed up.
The problem is that I had not selected the OEM unlock option, the command fasboot oem unlock does not work, and the miflash_unlock tool tells my that my account is not valid to unlock the phone. So I do not really know how to unlock the bootloader. Do you know if there is another way to unlock it/flash, that does not require opening the phone?
Context:
en.miui.com-thread-4697442-1-1
en.miui.com-thread-3560322-1-1
Thanks
Click to expand...
Click to collapse
You can use these commands on fastboot mode .. it should work then try to flash rom
fastboot flashing unlock
fastboot flashing unlock_critical
I have the same problem, stuck in the androidone mode... How do I save my data , if not possible (i have all photos and videos from south america trip there) than how to unlock bootloader and do factory reset ? ^_
norbertpoland said:
I have the same problem, stuck in the androidone mode... How do I save my data , if not possible (i have all photos and videos from south america trip there) than how to unlock bootloader and do factory reset ? ^_
Click to expand...
Click to collapse
If you are lucky, maybe you activated the photo and video backups and the videos/photos from your trips have been uploaded to https://photos.google.com from the different wifi hotspots that you may have connected to.
Cant unlock by miflash unlock cause it state that my device is not assosiated with the phone number (WTF !?) how to do hard reset in that situation when only androinone logo shows me or fastboot mode. Please help me guys I am in Rio for carnival and cant make normal photos withouyt phone
Just to add that it happened at 1 of march probably after some actualization or something.
norbertpoland said:
Cant unlock by miflash unlock cause it state that my device is not assosiated with the phone number (WTF !?) how to do hard reset in that situation when only androinone logo shows me or fastboot mode. Please help me guys I am in Rio for carnival and cant make normal photos withouyt phone
Click to expand...
Click to collapse
Had the same problem, in the end I decided to send it back for warranty repairs... and that fixed it of course, they probably had to open it to flash it in EDL mode, which I think you can do if you have the right screwdriver to open the phone.
https://www.youtube.com/watch?v=Uu7V0cBu41k
Thanks buty I m not technican to open and dig inside Is there any other possibility ?
norbertpoland said:
Thanks buty I m not technican to open and dig inside Is there any other possibility ?
Click to expand...
Click to collapse
If You are able to boot phone into bootloader (even with black screen, you can check with "fastboot devices" or looking for "Android Bootloader Interface" driver in Win DevManager), you can try this: https://forum.xda-developers.com/redmi-note-3/how-to/guide-reboot-to-edl-mode-fastboot-test-t3398718 to boot phone into EDL without opening case. More than that, may be its worth trying even simple "fastboot oem edl" command),