Related
Step by step what I did:
I rooted my tab via this tutorial: http://forum.xda-developers.com/showthread.php?t=812367
I then installed bootstrap (http://forum.xda-developers.com/showthread.php?t=981307), and after going through the steps and restarting I can't get into recovery or anything. It just sits at the logo.
How do I just reset it to factory?
If I completly broke this I think I'm going to puke... Can somebody give me a little bit of hope or help?
obihann said:
Step by step what I did:
I rooted my tab via this tutorial: http://forum.xda-developers.com/showthread.php?t=812367
I then installed bootstrap (http://forum.xda-developers.com/showthread.php?t=981307), and after going through the steps and restarting I can't get into recovery or anything. It just sits at the logo.
How do I just reset it to factory?
Click to expand...
Click to collapse
1st question .. is your tab unlock ?
2nd if not , means you gonna reflash your stock rom again via odin
3th . maybe you can use P1_add_hidden.pit via odin and press start and maybe its work , but 80% its work if didn't work u have to go for step 2
k0sh said:
1st question .. is your tab unlock ?
2nd if not , means you gonna reflash your stock rom again via odin
3th . maybe you can use P1_add_hidden.pit via odin and press start and maybe its work , but 80% its work if didn't work u have to go for step 2
Click to expand...
Click to collapse
My tab is unlocked. So I'm going to have to reflash my stock rom using odin? Where is the best place to track down the froyo rom for my tab?
obihann said:
My tab is unlocked. So I'm going to have to reflash my stock rom using odin? Where is the best place to track down the froyo rom for my tab?
Click to expand...
Click to collapse
I just found these links which may help:
http://forum.xda-developers.com/showthread.php?t=889165
http://forum.xda-developers.com/showthread.php?t=888071
Am I correct these should help?
Obihannm, I did the same yesterday.
You need the original stock firmware for your galaxy and Odin for flash it again.
Look for sam firmware in the google to grab your stock kernel, tools and guides for recovery.
With luck and patience, it is possible ressurrect your tab, but It will back unrooted and maybe you get a locked bootloader.
Just go here and follow attached guide guide.
Thanks guys, I will be up late trying this for sure. I noticed that this probably should live within the QA area not Genreal, so if a Mod or Admin wants to move it, please do.
TheATHEiST said:
Just go here and follow attached guide guide.
Click to expand...
Click to collapse
That would end up with me having gingerbread correct? Should I try to first restore it to factory since right now I can't even enter recovery? Or is it a moot point and I may as well go forward get gingerbread on it?
k0sh said:
1st question .. is your tab unlock ?
2nd if not , means you gonna reflash your stock rom again via odin
3th . maybe you can use P1_add_hidden.pit via odin and press start and maybe its work , but 80% its work if didn't work u have to go for step 2
Click to expand...
Click to collapse
wait by unlocked do you mean rooted? it is rooted but that is it...
obihann said:
That would end up with me having gingerbread correct? Should I try to first restore it to factory since right now I can't even enter recovery? Or is it a moot point and I may as well go forward get honeycomb on it?
Click to expand...
Click to collapse
You dont need to enter any recovery at all. Just "download" mode.
Go and read the guide.
TheATHEiST said:
You dont need to enter any recovery at all. Just "download" mode.
Go and read the guide.
Click to expand...
Click to collapse
OK, a few deep breaths and some "reading" (a new concept for me it seems) later I think I have a bit of a better understanding.
So reading through the overcome guide and a few other threads I think my issue is I must have had a protected bootloader, and that bootstrap program would have frigid that up (there probably was a warning if I slowed down). So that means my issue is my bootloader... Am I correct thus far?
If this is true, does this mean my current rom is actually fine, and fixing my bootloader is my #1 goal?
From there I can insteall the overcome rom, the normal gingerbread rom, or go back to stock? As I see it overcome/gingerbread is the best option.
Just install the stock rom, once back to normal if you have a locked bootloader patch it
All that you need in one handy page
http://forum.xda-developers.com/wiki/index.php?title=File:SamsungGalaxyTab.png
TheATHEiST said:
You dont need to enter any recovery at all. Just "download" mode.
Go and read the guide.
Click to expand...
Click to collapse
I read through the guide you linked to as well as this one (http://forum.xda-developers.com/showthread.php?t=1078622). You suggest I only need to access "download" mode, which I discovered how to do last night. Should Heimdall or other applications be able to see my device via download mode? Or is there a step I am missing.
As well I noticed in the guide you linked me it references patching the bootloader if it is locked, do I need to patch my bootloader or replace it completely as it seems to be broken?
I want to learn this stuff, this I read, and now I am asking. Again all help is appreciated.
Heimdall doesn't seem to do anything at all. I followed the guides as I best understood, and when it came time to hit the start button it instantly said completed with no actual results...
Any ideas?
a coworker was nice enough to help me out, using the stock rom with an unlocked bootloader he was able to bring it back for me. I'm now running froyo, rooted, and a unlocked boot loader so I should have no issues putting overcome on it.
before I start I must say thanks to mircea89fzr for providing the tutorial
http://forum.xda-developers.com/showthread.php?t=2409308
I made a noob friendly tool to flash kdz files. Auto changes hosts file, guides you threw the process step by step.
Download and Extract the zip
run the Auto Flash.exe
go threw the prompts
at the end of the flash it will ask you if you would like to root, if you would like to click yes.
it will then ask you if you want to debloat, if you do click yes.
http://www.slipsystem.co.za/downloads/autoflash/
its late so I will leave the explanations for tomorrow but its pretty self explanatory.
slipsystem said:
I made a noob friendly tool to flash kdz files.
Click to expand...
Click to collapse
Is it only for l5 II?
What about the root after flash,and if i flash a rooted kdz?
is it able to unlock bootloader of install CWM?
Thanx a lot!!
AXD96 said:
Is it only for l5 II?
What about the root after flash,and if i flash a rooted kdz?
is it able to unlock bootloader of install CWM?
Click to expand...
Click to collapse
the flash tool automates this process
http://forum.xda-developers.com/showthread.php?t=2409308
if you flash your phone in the same way then it might work.
the root after flash uses a Chinese tool called vroot to root the phone. if you flash a rooted kdz then your phone is pre rooted is it not? it is not able to unlock your bootloader as we are still figuring out how to unlock the bootloader of the l5 II nor can it install CWM for the same reason.
would you like a multi purpose tool like that?
I can write a beta script that will gives you options to do these things, like the image attached. I will write it for you but you must test it out as I dont have A L5 e610.
toni155 said:
Thanx a lot!!
Click to expand...
Click to collapse
Im glad you like it. I wrote it for you!!!
If you ask for help you will receive
slipsystem said:
the flash tool automates this process
http://forum.xda-developers.com/showthread.php?t=2409308
if you flash your phone in the same way then it might work.
the root after flash uses a Chinese tool called vroot to root the phone. if you flash a rooted kdz then your phone is pre rooted is it not? it is not able to unlock your bootloader as we are still figuring out how to unlock the bootloader of the l5 II nor can it install CWM for the same reason.
would you like a multi purpose tool like that?
I can write a beta script that will gives you options to do these things, like the image attached. I will write it for you but you must test it out as I dont have A L5 e610.
Click to expand...
Click to collapse
why do you use a "chinese" software that probably you dont understand
a software that exploit some android bug can be very dangerous, it will not destroy your smartphone but it can steal personal data or open new exploit for malware
why you dont use this software http://www.cydiaimpactor.com/ made by saurik, the creator of cydia, i hope you know about ios jailbreak:good:
AXD96 said:
why do you use a "chinese" software that probably you dont understand
a software that exploit some android bug can be very dangerous, it will not destroy your smartphone but it can steal personal data or open new exploit for malware
why you dont use this software http://www.cydiaimpactor.com/ made by saurik, the creator of cydia, i hope you know about ios jailbreak:good:
Click to expand...
Click to collapse
I only used the chinese root because that was the only way to root. I then remove it and install supersu. Thanks for the link i will definatly give it a shot when i fully reset my phone again.
Download link is not working
0ptimus82 said:
Download link is not working
Click to expand...
Click to collapse
Sorry man my service provider emailed me to say thatmy website is using to much bandqidth. I find it difficult to maintain all the tools i write. If ypu relly want this i can go threw my archives and find it again, then upload ittodropbox for you.
slipsystem said:
Sorry man my service provider emailed me to say thatmy website is using to much bandqidth. I find it difficult to maintain all the tools i write. If ypu relly want this i can go threw my archives and find it again, then upload ittodropbox for you.
Click to expand...
Click to collapse
Thanks, I managed to download the files by using a public server to access your web page.
Once I open the tool I push "Debloat", the download window shows up but it never gets to 100%, I assume It´s happening becase the additional files are hosted in your site as well. I´d appreciate if you could share a full pack including the additional files.
Do all the utilities in "Multi Tool" and "L5 II TweakBox" work with my LG L5II E450g?
I´m also trying to find the way to change the boot animation (it´s the opperator logo), is there any way to make it?
Thanks for your support.
0ptimus82 said:
Thanks, I managed to download the files by using a public server to access your web page.
Once I open the tool I push "Debloat", the download window shows up but it never gets to 100%, I assume It´s happening becase the additional files are hosted in your site as well. I´d appreciate if you could share a full pack including the additional files.
Do all the utilities in "Multi Tool" and "L5 II TweakBox" work with my LG L5II E450g?
I´m also trying to find the way to change the boot animation (it´s the opperator logo), is there any way to make it?
Thanks for your support.
Click to expand...
Click to collapse
Ok I will see what I can do. I will make a few tweaks as you cant root the latest firmware using impactor.
Yes and no you can change the bootanimation.
you can change the animation but not the logo in the beginning as that is embeded in the bootloader if Im not mistaken.
this may be worth looking at
http://forum.xda-developers.com/showthread.php?t=2650588&page=3
slipsystem said:
Ok I will see what I can do. I will make a few tweaks as you cant root the latest firmware using impactor.
Yes and no you can change the bootanimation.
you can change the animation but not the logo in the beginning as that is embeded in the bootloader if Im not mistaken.
this may be worth looking at
http://forum.xda-developers.com/showthread.php?t=2650588&page=3
Click to expand...
Click to collapse
Thanks, I was able to manually debloat the ROM with the list in this link and using root explorer.
It´s a shame that it´s not possible to change the opperator logo,
Hello!
I have a Huawei Mate 9 (MHA-L29C432B190). Yesterday I tried to root my Phone to play Pokemon Go with fake gps. After I managed to root my phone, I couldn't boot into TWRP Recovery Mode anymore.
Because I still had some files I needed to flash I installed Flashfire from the PlayStore. I think after I flashed the newest Magisk version(The flash failed because of Error:1), my device got unrooted. But I think my device is still partly rooted because I can't get into Pokemon Go. Everytime I try to start it I get stuck the loading screen. So right now I can't flash anything to get my root back and I don't have the root to use alternative flash applications. I also tried to start return my phone to stock back with a update.app But it can't be installed. I also can't use "fastboot flash recovery twrp.img" I always get " Writing 'recovery'...FAILED (remote:command can't be used/allowed)". And also after some reboots my oem unlock got turned off and I can't turn it on anymore.
I don't have any ideas anymore what to do. I thought I could root my device, so I could unroot properly with superuser. I tried some other application like KingRoot oder OneClickRoot but both of them don't have a rooting method for the Huawei Mate 9 yet. Btw I don't have a backup because of my naivety.
I hope you guys can help me . I appreciate any ideas
Thanks in advance
In summary what do u want???
Sent from my iPhone using Tapatalk Pro
abuk91 said:
In summary what do u want???
Sent from my iPhone using Tapatalk Pro
Click to expand...
Click to collapse
Either way I want a method to root my phone without some flash application or I want a way to return my phone to stock. Or a method to fix TWRP would be fine too.
Kyranix said:
Either way I want a method to root my phone without some flash application or I want a way to return my phone to stock. Or a method to fix TWRP would be fine too.
Click to expand...
Click to collapse
Do a Google search for:
"Return to stock (your model number)"
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Do a Google search for:
"Return to stock (your model number)"
I already did and everything I found didn't work
Kyranix said:
Do a Google search for:
"Return to stock (your model number)"
I already did and everything I found didn't work
Click to expand...
Click to collapse
What did you find? What have you tried?
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
What did you find? What have you tried?
I tried to do Upgrades with many different stock firmwares for my model
Kyranix said:
What did you find? What have you tried?
I tried to do Upgrades with many different stock firmwares for my model
Click to expand...
Click to collapse
That doesn't tell me anything. That just tells me that you tried flashing.
It doesn't tell me anything about exactly what you tried to flash or what errors you got when you flashed. I need more precise information to help you. Your simple answers aren't helping me understand anything about what you have going on with your device.
What tools have you used? What guide/instructions did you use? What files have you used? What errors did you get? What results did you get. What do mean "didn't work"? "Didn't work" can mean many things.
I might be able to help you fix your device but I can't fix ignorance.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
That doesn't tell me anything. That just tells me that you tried flashing.
It doesn't tell me anything about exactly what you tried to flash or what errors you got when you flashed. I need more precise information to help you. Your simple answers aren't helping me understand anything about what you have going on with your device.
What tools have you used? What guide/instructions did you use? What files have you used? What errors did you get? What results did you get. What do mean "didn't work"? "Didn't work" can mean many things.
I might be able to help you fix your device but I can't fix ignorance.
First I tried to do a force upgrade with a "dload" folder with a update.app file on my sdcard . After booting into this upgrade mode by pressing vol up + vol down + power button my device starts to install the stock firmware, but after it reaches 5% I get the message "Error with installing" and a Link to the same site when you boot into twrp. This always happens no matter which file I use. Next I tried to do a normal upgrade by calling this number "*#*#2846579#*#*" (The dload folder is still on my sdcard). But when I start the software upgrade I get booted into twrp and like I said in my post, always when I try to get into twrp I get stuck on the "Your device is booting screen". This is what I tried and basicly every site on google is saying I should try to do one of these two methods
(Here a guide for example: https://www.getdroidtips.com/full-guide-install-stock-firmware-huawei-smartphone/)
(My file in my last try: https://www.getdroidtips.com/huawei-mate-9-stock-firmware-collections/)
Kyranix said:
That doesn't tell me anything. That just tells me that you tried flashing.
It doesn't tell me anything about exactly what you tried to flash or what errors you got when you flashed. I need more precise information to help you. Your simple answers aren't helping me understand anything about what you have going on with your device.
What tools have you used? What guide/instructions did you use? What files have you used? What errors did you get? What results did you get. What do mean "didn't work"? "Didn't work" can mean many things.
I might be able to help you fix your device but I can't fix ignorance.
First I tried to do a force upgrade with a "dload" folder with a update.app file on my sdcard . After booting into this upgrade mode by pressing vol up + vol down + power button my device starts to install the stock firmware, but after it reaches 5% I get the message "Error with installing" and a Link to the same site when you boot into twrp. This always happens no matter which file I use. Next I tried to do a normal upgrade by calling this number "*#*#2846579#*#*" (The dload folder is still on my sdcard). But when I start the software upgrade I get booted into twrp and like I said in my post, always when I try to get into twrp I get stuck on the "Your device is booting screen". This is what I tried and basicly every site on google is saying I should try to do one of these two methods
(Here a guide for example: https://www.getdroidtips.com/full-guide-install-stock-firmware-huawei-smartphone/)
(My file in my last try: https://www.getdroidtips.com/huawei-mate-9-stock-firmware-collections/)
Click to expand...
Click to collapse
Stock upgrades are not going to work if you are rooted and have TWRP.
Stock updates require stock recovery and an unmodified system partition(no root).
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Droidriven said:
Stock upgrades are not going to work if you are rooted and have TWRP.
Stock updates require stock recovery and an unmodified system partition(no root).
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
Yeah I have already seen, but I can't find an other method to return my Huawei Mate 9 to stock and I don't really have an root.
Kyranix said:
Yeah I have already seen, but I can't find an other method to return my Huawei Mate 9 to stock and I don't really have an root.
Click to expand...
Click to collapse
But you have TWRP, that won't work. You need stock recovery, custom recovery can't flash stock updates.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Droidriven said:
But you have TWRP, that won't work. You need stock recovery, custom recovery can't flash stock updates.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
And can you please tell me how to do it then. You can also send me a guide
Kyranix said:
And can you please tell me how to do it then. You can also send me a guide
Click to expand...
Click to collapse
I am not sure why you are not doing this in your device forum?
https://forum.xda-developers.com/mate-9
It seems that there would be more assistance specific to your device.
or did I miss something?
Moscow Desire said:
I am not sure why you are not doing this in your device forum?
https://forum.xda-developers.com/mate-9
It seems that there would be more assistance specific to your device.
or did I miss something?
Click to expand...
Click to collapse
Well thats because I already had problems to post this thread because I am new to xda
Moscow Desire said:
I am not sure why you are not doing this in your device forum?
https://forum.xda-developers.com/mate-9
It seems that there would be more assistance specific to your device.
or did I miss something?
Click to expand...
Click to collapse
Well thats because I already had problems to post this thread because I am new to xda But thanks for pointing it out, I will probably try it there again. Maybe there I will have more luck
Kyranix said:
Well thats because I already had problems to post this thread because I am new to xda [emoji14] But thanks for pointing it out, I will probably try it there again. Maybe there I will have more luck
Click to expand...
Click to collapse
Even new members(less than 10 posts) can post in device specific Q&A fora, new members are only blocked from posting in "development" fora and threads.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
So, i have a P10 vtr-l29c432, bootloader unlocked, with twrp installed and from future rom installed, and now i want to go back to stock rom with Huawei recovery, to use the official updates via ota without problems. I'm not a noob but this is my first Huawei device and things are way more complicated compared with oneplus or nexus devices. My question is how to do it, because what i've so far is confusing me, if someone could explain me or give me some instructions i will appreciate it, thanks!
Hi!
same situation here. I would very much like to go back to stock but I'm not sure how... I saw a tutorial but I am not certain that that is what I need. Any confirmation would be very appreciated!!!
Tx & best
Exact same problem here on the p10 vtr-l09, seems to be a few different methods out there, either don't work or too confusing
You can try to update your phone with my guide.
This will reformat the system and your phone is on stock after a factory reset (reset is important when you come from another rom).
After factory reset you should be able to lock the bootloader.
Important is that you have in mind which Android version is installed and which phone model you have.
No warranty for this, I didn't try it or know someone with the same situation. But after learning something about how emui works it shouldn't be a problem.
did anyone tried this? I'm using custom rom from openkirin project and I would like to get back to stock. I have the stock recovery
On openkirin's website is a tutorial.
You need to extract system.img, ramdisk.img and kernel.img from update.app and flash them with Fastboot. After this boot into eRecovery and make a factory reset.
Jannomag said:
On openkirin's website is a tutorial.
You need to extract system.img, ramdisk.img and kernel.img from update.app and flash them with Fastboot. After this boot into eRecovery and make a factory reset.
Click to expand...
Click to collapse
Yeah I tried to follow the instructions which they put in three separate articles, however the last one is landing on the main page and I don't see the flasing instructions. Here is the link:
https://openkirin.net/user_guide/how-to-flash-extracted-partition-images/
Doesn't work in all countries but worth a try:
Go to eRecovery (not recovery) and use wifi to go back to stock.
Worked for me.
amducias said:
Yeah I tried to follow the instructions which they put in three separate articles, however the last one is landing on the main page and I don't see the flasing instructions. Here is the link:
https://openkirin.net/user_guide/how-to-flash-extracted-partition-images/
Click to expand...
Click to collapse
Then do it like I wrote, the Fastboot commands should be clear if you already installed the Rom.
WiFi downloads don't work if you're rooted, you need to flash stock ramdisk manually before you can download via eRecovery.
ej8989 said:
Doesn't work in all countries but worth a try:
Go to eRecovery (not recovery) and use wifi to go back to stock.
Worked for me.
Click to expand...
Click to collapse
You're a life saver!!! Thank you very much!
Jannomag said:
WiFi downloads don't work if you're rooted, you need to flash stock ramdisk manually before you can download via eRecovery.
Click to expand...
Click to collapse
Maybe he didn't install magisk when he was on one of the OpenKirin roms, so ramdisk is still stock. I used this eRecovery WiFi method when I was on fRomFuture, no magisk installed.
amducias said:
You're a life saver!!! Thank you very much!
Click to expand...
Click to collapse
You're welcome.
Use huru updater as it is safest back to stock option for latest Huawei devices. Lookup tool right here in xda.
absynteZero said:
If the phone is already with last version, i cant be sure it can be possible, ask the post autor about manual oreo udpate. from my remember his name is Jannomag
Click to expand...
Click to collapse
Jannomag here, it's possible to "update" to the same version. My script just tells the recovery to install the given update files. The recovery will overwrite the system without removing user data.
This should work without any issues but it can happen, that bugs are still present after this. If you want to fix firmware issues a complete factory reset is much more effective.
absynteZero said:
https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
Click to expand...
Click to collapse
That is it.
First of all i want to make clear that, i am new to this community, so for any inconvenience please forgive me.
I was curious about what will be the safest way to root my Android 11 devices running on MIUI Global 12.5.2 .
i watched a lot of YouTube videos but didn't come up with an answer i am looking for, i got confused a lot some people suggest doing without pc and some with some apps.
I would be glad if someone can explain to me, the best way to root Android device and do's and dont's before and after rooting the device. And how can i prevent my device from:
Getting hard/soft Brick.
Losing Data.
Data encryption.
And the things i should get familiar with before rooting.
Thanks to everyone in advance
akram0010 said:
First of all i want to make clear that, i am new to this community, so for any inconvenience please forgive me.
I was curious about what will be the safest way to root my Android devices running on MIUI Global 12.5.2 .
i watched a lot of YouTube videos but didn't come up with an answer i am looking for, i got confused a lot some people suggest doing without pc and some with some apps.
I would be glad if someone can explain to me, the best way to root Android device and do's and dont's before and after rooting the device. And how can i prevent my device from:
Getting hard/soft Brick.
Losing Data.
Data encryption.
And the things i should get familiar with before rooting.
Thanks to everyone in advance
Click to expand...
Click to collapse
You can not root without losing data, unlocking Xiaomi bootloader wipe all your data. For rooting, take a look Magisk instruction https://topjohnwu.github.io/Magisk/install.html very easy
akram0010 said:
Thanks for letting me know, it means i would have to backup my data first.
Click to expand...
Click to collapse
Make backup of data,apps, unlock bootloader then you can root your phone with magisk. Unlocking bootloader wiping all data.
DungxCt said:
You can not root without losing data, unlocking Xiaomi bootloader wipe all your data. For rooting, take a look Magisk instruction https://topjohnwu.github.io/Magisk/install.html very easy
Click to expand...
Click to collapse
In this page it tells, if you plan to install custom kernels install it after magisk, is it necessary to install custom kernel.
What if i don't install any kernel, will the default kernel be still there?
akram0010 said:
In this page it tells, if you plan to install custom kernels install it after magisk, is it necessary to install custom kernel.
What if i don't install any kernel, will the default kernel be still there?
Click to expand...
Click to collapse
You miss understand it, it doesn't mean you HAVE TO install custom kernel after root. Just mean: "If you WANT to, just do it after intall Magisk"
DungxCt said:
You miss understand it, it doesn't mean you HAVE TO install custom kernel after root. Just mean: "If you WANT to, just do it after intall Magisk"
Click to expand...
Click to collapse
Can i follow this , because i have the same device and also both have Android 11 however the miui is miui global 12.5.1where mine is miui global 12.5.2
akram0010 said:
Can i follow this , because i have the same device and also both have Android 11 however the miui is miui global 12.5.1where mine is miui global 12.5.2
Click to expand...
Click to collapse
Yes, If you want your device to become a brick.
Use https://play.google.com/store/apps/details?id=com.xiaomiui.downloader&hl=en_US&gl=US to download ur using version and extract the boot.img ur own
DungxCt said:
Yes, If you want your device to become a brick.
Use https://play.google.com/store/apps/details?id=com.xiaomiui.downloader&hl=en_US&gl=US to download ur using version and extract the boot.img ur own
Click to expand...
Click to collapse
First of all, i want to thank you for helping me so far.
I downloaded the App as you said and selected my version, now ita shows me three options to download OTA, RECOVERY, FASTBOOT.
which one should i download, and what am i gonna do with them after downloading?
akram0010 said:
First of all, i want to thank you for helping me so far.
I downloaded the App as you said and selected my version, now ita shows me three options to download OTA, RECOVERY, FASTBOOT.
which one should i download, and what am i gonna do with them after downloading?
Click to expand...
Click to collapse
Also it shows the version:
V12.5.4xxxxxxxxxxx
Click to expand...
Click to collapse
However mine is:
V12.5.2xxxxxxxxx
Click to expand...
Click to collapse
akram0010 said:
Also it shows the version:
However mine is:
Click to expand...
Click to collapse
Tap older version and download the recovery. Use https://github.com/ssut/payload-dumper-go to extract boot.img from payload.bin. Look how here https://www.xda-developers.com/how-to-install-magisk/
DungxCt said:
Tap older version and download the recovery. Use https://github.com/ssut/payload-dumper-go to extract boot.img from payload.bin. Look how here https://www.xda-developers.com/how-to-install-magisk/
Click to expand...
Click to collapse
I tapped on the older version, however mine version, i.e (12.5.2.0 RJCINXM ), is not listed.
I checked a couple of websites too, on them only this version is not listed others are like 12.5.3.0 etc
akram0010 said:
I tapped on the older version, however mine version, i.e (12.5.2.0 RJCINXM ), is not listed.
I checked a couple of websites too, on them only this version is not listed others are like 12.5.3.0 etc
Click to expand...
Click to collapse
I want to know, would it matter if i go for 12.5.4.0 version? cause the device model is same in both versions.
akram0010 said:
I want to know, would it matter if i go for 12.5.4.0 version? cause the device model is same in both versions.
Click to expand...
Click to collapse
Yea no prob, just the get boot.img from it
DungxCt said:
Yea no prob, just the get boot.img from it
Click to expand...
Click to collapse
Let me get it straight, you mean the ROM version doesn't matter, however the ROM should be same as that of the device model.
akram0010 said:
Let me get it straight, you mean the ROM version doesn't matter, however the ROM should be same as that of the device model.
Click to expand...
Click to collapse
Yea, just get the boot.img from the ROM you are using then all good.
DungxCt said:
Yea, just get the boot.img from the ROM you are using then all good.
Click to expand...
Click to collapse
Sure, from where would i get this boot.img, i mean from recovery ROM or FASTBOOT ROM?
akram0010 said:
Sure, from where would i get this boot.img, i mean from recovery ROM or FASTBOOT ROM?
Click to expand...
Click to collapse
Recovery ROM, unzip and extract from payload.bin.
Use https://github.com/ssut/payload-dumper-go to extract boot.img from payload.bin. Look how here https://www.xda-developers.com/how-to-install-magisk/.
I said it already, at #10
DungxCt said:
Recovery ROM, unzip and extract from payload.bin.
Use https://github.com/ssut/payload-dumper-go to extract boot.img from payload.bin. Look how here https://www.xda-developers.com/how-to-install-magisk/.
I said it already, at #10
Click to expand...
Click to collapse
Yes you said, problem is i am using Linux Ubuntu, i have adb and fastboot setup, however this payload dumper would it work on Linux
akram0010 said:
Yes you said, problem is i am using Linux Ubuntu, i have adb and fastboot setup, however this payload dumper would it work on Linux
Click to expand...
Click to collapse
can you even check and see?
akram0010 said:
Yes you said, problem is i am using Linux Ubuntu, i have adb and fastboot setup, however this payload dumper would it work on Linux
Click to expand...
Click to collapse
Can i do it manually? i mean extracting the boot.img from the recovery ROM manually.