"tap & go" stuck! Help needed! - Xperia Z Q&A, Help & Troubleshooting

Fresh installed LineageOS 14.1 for Xperia Z and stuck on "Tap & Go", dont know what to do, help me, thanks!

Had the same issue...
nevenx said:
Fresh installed LineageOS 14.1 for Xperia Z and stuck on "Tap & Go", dont know what to do, help me, thanks!
Click to expand...
Click to collapse
I´m a new user, can´t post links... so this is the solution from reddit / r / oneplus
1. In TWRP > Wipe > Advanced Wipe, wipe everything.
2. Install LineageOS only.
3. Reboot into system.
4. Go through setup wizard etc.
5. Reboot into TWRP.
6. Flash GApps.
Let me know if this worked!
Regards.

ApocalypseDuke said:
I´m a new user, can´t post links... so this is the solution from reddit / r / oneplus
1. In TWRP > Wipe > Advanced Wipe, wipe everything.
2. Install LineageOS only.
3. Reboot into system.
4. Go through setup wizard etc.
5. Reboot into TWRP.
6. Flash GApps.
Let me know if this worked!
Regards.
Click to expand...
Click to collapse
i used my brothers samsung with lolipop and just but my and his phone back to back and it worked

Related

Please help me .. I wipe the system on my phone

Hello
today before I install CM 12.1 on my XT1072 I clicked on wipe in TWRP then advanced wipe then I selected
* Dalvik cache
* Data
* Cashe
* System
I tried to install CM 12.1 after that but it gave me Error
now I don't have any os installed on my phone
So please if any one know a full rom link or any way to install the os again please help me with it
thank you very much
Hassan Qandil said:
Hello
today before I install CM 12.1 on my XT1072 I clicked on wipe in TWRP then advanced wipe then I selected
* Dalvik cache
* Data
* Cashe
* System
I tried to install CM 12.1 after that but it gave me Error
now I don't have any os installed on my phone
So please if any one know a full rom link or any way to install the os again please help me with it
thank you very much
Click to expand...
Click to collapse
This might be of help: http://forum.xda-developers.com/moto-g-lte/help/qa-moto-g-2015-xt1072-restore-to-to-t3126176
mic_he said:
This might be of help: http://forum.xda-developers.com/moto-g-lte/help/qa-moto-g-2015-xt1072-restore-to-to-t3126176
Click to expand...
Click to collapse
I did everything there .. but cmd window said waiting for device
can you help me find rom img file to install it with TRWP
thank you
Hassan Qandil said:
I did everything there .. but cmd window said waiting for device
can you help me find rom img file to install it with TRWP
thank you
Click to expand...
Click to collapse
Now all i can do with my device is enter fastboot and enter TWRP Recovery
I succeeded to reinstall the stock rom
by this thread
http://forum.xda-developers.com/showthread.php?t=2542219
Thank you

(ROM) Flyme 6.7.5.15 by Siyang

http://bbs.lenovomobile.cn/z2pro/t831704/
https://mega.nz/#!Z25QRJ5J!-vIbNagowU2-XNF4o1Y4YKeAMXvrw7PZ9cFVww7UcH4
Hi there.
I just install this ROM on my phone.
Now I'm trying to install Google Play on it.
Here is a optional link to download the ROM:
https://mega.nz/#!BANhTIZZ!OH8QT5WOvZ8bCFjrn-vfl4jQvbXGD3w1PlExDfSTzNM
Edit: Google play with open gapps pico
Root:
https://mega.nz/#!xN8kQIjB!PPaZGri4pqLIZvQsnhrUitjXUEct8fetyMeo5C1Athg
Peace
I am currently on AICP so how can I install this rom?
alien_jiggy said:
I am currently on AICP so how can I install this rom?
Click to expand...
Click to collapse
Firts you have to install via QFIL Zui(2.3.044)
Unlock boatloader
Install Recovery 3.1(chinese one)
Wipe Dalvik, Cache and Data via recovery
Install Flyme and boot system (firts boot take some time, be patiente)
Install opengapps arm64 6.0 pico
Enjoy
Zenuno said:
Firts you have to install via QFIL Zui(2.3.044)
Unlock boatloader
Install Recovery 3.1(chinese one)
Wipe Dalvik, Cache and Data via recovery
Install Flyme and boot system (firts boot take some time, be patiente)
Install opengapps arm64 6.0 pico
Enjoy
Click to expand...
Click to collapse
i used TWRP 3.02 and didnt install stock rom via QFIL Zui.
i i just wiped cache/data/dalvik/system ten flash with Flymeos Rom.everything seems good.but still testing
Zenuno said:
Firts you have to install via QFIL Zui(2.3.044)
Unlock boatloader
Install Recovery 3.1(chinese one)
Wipe Dalvik, Cache and Data via recovery
Install Flyme and boot system (firts boot take some time, be patiente)
Install opengapps arm64 6.0 pico
Enjoy
Click to expand...
Click to collapse
Unlocked bootloader
Flashed TWRP 3.1 Official
Wiped Dalvik, Cache and Data
Installed ROM
ROM on bootloop... Waited for over 10 min
Previously, had ZUI 2.3 Marshmallow... Please help...
G7495x said:
Unlocked bootloader
Flashed TWRP 3.1 Official
Wiped Dalvik, Cache and Data
Installed ROM
ROM on bootloop... Waited for over 10 min
Previously, had ZUI 2.3 Marshmallow... Please help...
Click to expand...
Click to collapse
Hi there.
Try to reboot to recovery again and wipe dalvik, cache, data and system and install rom again...
Zenuno said:
Hi there.
Try to reboot to recovery again and wipe dalvik, cache, data and system and install rom again...
Click to expand...
Click to collapse
Yep... Did that... Obviously...
Currently, switched to lineage nougat
new version look up
new version on the main page
iliakele said:
new version on the main page
Click to expand...
Click to collapse
if there is a new version then change thread title too .... still writing there old version name ...
KaptanHarlock said:
if there is a new version then change thread title too .... still writing there old version name ...
Click to expand...
Click to collapse
i cant change it
oops, any step by step guide, from unlock bootloader? thx.
OTG Support in Flyme
Don´t work OTG in Flyme 6.7.11.17R ??
meizu released android 7 based flyme 6 rom for their phones . i hope some one can port to our zuk phones ...
https://reameizu.com/flyme-update-6-7-12-12-beta/

Flash OOs Oreo Stable release

Folks,
Seeing alot of comments about bootloops, etc after trying to install the new stable OOS Oreo release.
I went through the same issue myself and found the following method to work best.
PLEASE NOTE: I'm not responsible if this does Any type of damage or issues to your device.
Be sure to backup all you need to back up to your PC.
1. Complete wipe of phone.
2. Flash the stock recovery that was used for reverting from Oreo Beta to Nougat. http://oxygenos.oneplus.net.s3.amazonaws.com/OP5_recovery.img
3. Wipe everything again.
4. Sideload new Oreo release. (Credit @HatRiGt, https://drive.google.com/open?id=1NW5zyUOL6bWgUWozFGLiutzud203npKp)
5. Reboot to bootloader and flash the Chinese TWRP. https://drive.google.com/open?id=1AKbC4HB0h4rEldQUowWGdyM4iYBVV--7
6. Reboot to recovery and flash Magisk. I flashed the 14.6 version and haven't found any issues yet. (https://forum.xda-developers.com/attachment.php?attachmentid=4366826&d=1513897917)
7. Boot phone.
I cannot promise this will work for you, but it has done the job for me.
Running Oreo Stable with Magisk 14.6 and restored all apps from Titanium Backup that I saved on my PC.
I highly suggest blu_spark TWRP instead of chinese one, and i think this method is ONE of the other working way
Couldn't get mine to work with blu spark, hence why I had to use chinese
Link for Chinese twrp please
Thank you very much, work for me
Make a video of it please
New Magisk v.15.
Thanks to topjohnwu.
joecaesar said:
Link for Chinese twrp please
Click to expand...
Click to collapse
Added to OP.
All is well. And with google Drive almost all data is back.
Nice & easy workaround..
Step 5 has to be : install TWRP on fastboot mode...
@hallo dare
Any chance you can make a very detailed video about this process?
cultofluna said:
Nice & easy workaround..
Step 5 has to be : install TWRP on fastboot mode...
Click to expand...
Click to collapse
Yes, sorry. Amended text now.
lvints said:
@hallo dare
Any chance you can make a very detailed video about this process?
Click to expand...
Click to collapse
No real need for a video mate, just follow the post step by step and you're golden!
I can not sideload Oreo zip, it says can not read
Lvsitano said:
I can not sideload Oreo zip, it says can not read
Click to expand...
Click to collapse
You should try changing the TWRP
If you have problems with adb sideload:
Boot into fastboot and install stock .
Unlock/Lock your Phone and unlock it again. Locking will wipe the whole phone.
After this you can make a clean installation.
Reboot to bootloader and flash the Chinese TWRP and boot to Recovery.
Install the oreo.zip file.
Reboot to System.
Make your Setup: WLAN, GMail Account aso.....
After all boot to Recovery and install Magisk
Very easy, put oreo zip file in the root folder, backup all data, flash stock recovery, boot with stock recovery, wipe cache, upgrade internal..., Select oreo zip file and flash it, then back and select wipe, select erase every thing and reboot. Done.
Thank you so much! I finally got it working. I needed to do a factory wipe and skip the magisk installation but it worked!
Cheers!
nikoeuren said:
Thank you so much! I finally got it working. I needed to do a factory wipe and skip the magisk installation but it worked!
Cheers!
Click to expand...
Click to collapse
Magisk won't flash on stock recovery, if that's the reason you had to skip installing it.
hallo dare said:
Magisk won't flash on stock recovery, if that's the reason you had to skip installing it.
Click to expand...
Click to collapse
No I installed the TWRP and flashed magisk. It refused to boot so I factory swiped it and all was good. Now I have to figure out how to install magisk without getting into bootloop.
Sent from my ONEPLUS A5000 using Tapatalk

[HELP] Bootloop with any Oreo Rom...

Hi,
Since few days, I'm facing bootloop when I install an oreo custom rom on my santoni (3gb/32gb)
I tried every step :
from Miui eu rom, flashing twrp by nikesh, firmware 34, oreo rom, gapps...
Full wipe, etc...
I even tried to erase the whole memory of the phone.
Every time, I get bootloop...
Can't understand because I already installed some oreo roms in a recent past, but now, I'm lost !
What can I do ?
Thanks for your help.
newbie_or_not_newbie said:
Hi,
Since few days, I'm facing bootloop when I install an oreo custom rom on my santoni (3gb/32gb)
I tried every step :
from Miui eu rom, flashing twrp by nikesh, firmware 34, oreo rom, gapps...
Full wipe, etc...
I even tried to erase the whole memory of the phone.
Every time, I get bootloop...
Can't understand because I already installed some oreo roms in a recent past, but now, I'm lost !
What can I do ?
Thanks for your help.
Click to expand...
Click to collapse
I have the same problem?!
Nobody for help a desesperate newbie ..?
newbie_or_not_newbie said:
Nobody for help a desesperate newbie ..?
Click to expand...
Click to collapse
Try full wipe, flash ROM ,gapps ,magisk and reboot.
Still bootloop.
I tried what you said, full wipe, flash rom, gapps, magisk then reboot.
Really don't know why it doesn't work anymore with oreo custom roms.
Try this!
-Your data and cache Partition must be in ext4 format.
-Enter in twrp recovery wipe Dalvik, system, data and cache Partition.
-reboot to recovery
-install just the ROM zip without gapps ir another addon
- reboot to system
If the boot is not sucessfull, reboot to twrp and wipe data Partition only.
-if the boot is sucessfull, reboot to twrp install gapps and reboot to system again.
After the boot if you want to configure Your Google account reboot to twrp and swipe to factory reset and no more!
- reboot
Ps- this last boot takes a Little more time dont sorry
Hope i helped
newbie_or_not_newbie said:
Hi,
Since few days, I'm facing bootloop when I install an oreo custom rom on my santoni (3gb/32gb)
I tried every step :
from Miui eu rom, flashing twrp by nikesh, firmware 34, oreo rom, gapps...
Full wipe, etc...
I even tried to erase the whole memory of the phone.
Every time, I get bootloop...
Can't understand because I already installed some oreo roms in a recent past, but now, I'm lost !
What can I do ?
Thanks for your help.
Click to expand...
Click to collapse
Hello,
once installation of new ROM done, install Gapps as well. once it done?
Here to go >>
Twrp > Advanced > tools > Disable verify. once done, wipe caches/dalvick and then reboot from there (you would see end of disabling verify)
But, I'm not responsible if your phone went Brick at any cause, All the best...
Sr
---------- Post added at 06:07 AM ---------- Previous post was at 06:03 AM ----------
newbie_or_not_newbie said:
Nobody for help a desesperate newbie ..?
Click to expand...
Click to collapse
Answered as below
S r
{
Hello,
once installation of new ROM done, install Gapps as well. once it done?
Here to go >>
Twrp > Advanced > tools > Disable verify. once done, wipe caches/dalvick and then reboot from there (you would see end of disabling verify)
But, I'm not responsible if your phone went Brick at any cause, All the best...
}
---------- Post added at 06:14 AM ---------- Previous post was at 06:07 AM ----------
newbie_or_not_newbie said:
Still bootloop.
I tried what you said, full wipe, flash rom, gapps, magisk then reboot.
Really don't know why it doesn't work anymore with oreo custom roms.
Click to expand...
Click to collapse
Here you go
once installation of new ROM and Gapps as well.
Here to go >>
Twrp > Advanced > tools > Disable verify. once done, wipe caches/dalvick and then reboot from there (you would see end of disabling verify)
But, I'm not responsible if your phone went Brick at any cause, but it will take 5mins at least to login. All the best...
S r
Thanks for all your help.
For the moment, I'm tired to try every day since weeks.
So I keep staying with a Nougat Rom, which is working, soon I'll try again with an Oreo Rom !
Thanks a lot again !
EDIT : @Speaker87 :
your solution is fine !
Except the last "After the boot if you want to configure Your Google account reboot to twrp and swipe to factory reset and no more!
- reboot", which gives me bootloop.
If I don't swipe to factory reset, Play store gives me FC... Google Play services too.
EDIT 2 :
Strange, I have bootloop but can hear the startscreen sound (if you understand my bad english...)
newbie_or_not_newbie said:
Thanks for all your help.
For the moment, I'm tired to try every day since weeks.
So I keep staying with a Nougat Rom, which is working, soon I'll try again with an Oreo Rom !
Thanks a lot again !
EDIT : @Speaker87 :
your solution is fine !
Except the last "After the boot if you want to configure Your Google account reboot to twrp and swipe to factory reset and no more!
- reboot", which gives me bootloop.
If I don't swipe to factory reset, Play store gives me FC... Google Play services too.
EDIT 2 :
Strange, I have bootloop but can hear the startscreen sound (if you understand my bad english...)
Click to expand...
Click to collapse
In that case , in the last step, instead of swipe to factory reset, format only data Partition, and reboot!
Try that
If after the reboot , you are in bootloop, reboot again to twrp and format data Partition again!
Thanks again for help.
Do you think the problem could come from Gapps ?
And also I'm using the double sim.
Before, I had a sd card, which had the roms (zip) on it.
Could the problem come from this too ?
newbie_or_not_newbie said:
Thanks again for help.
Do you think the problem could come from Gapps ?
And also I'm using the double sim.
Before, I had a sd card, which had the roms (zip) on it.
Could the problem come from this too ?
Click to expand...
Click to collapse
Today, i flashed a new Oreo ROM! I passed all the difficulties that you already described! I remember that i read Somewhere in xda to remove sdcard and sim trata, on the last step (after flash ROM, boot, flash gapps boot, format data Partition, and then remove sim tray and boot again) . The boot occurs normally, 2-3 minutes later Google configuration wizard pops on screen. I think the problem is Oreo adjacent, or a encription problem! Don't know exactly...
Try to install micro gapps instead of pico apps
If the phone starts make your settings an go to Recovery.
Backup your data.
Make factory reset
Install rom
Now you can install pico gapps
Restore data
Restart
I have the same problem ,
with all of the oreo roms ,
if i do not flash the gapps phone does not bootloop
i tried pico/mini/nano gapps
Hi
So, do you think it could be ok if I flash micro or stock gapps ?
Like @sptepacate, if I don't flash gapps, the phone boots.
If I flash gapps then, the phone boots but google account bootloops...
Hurray !
I followed every step of @Speaker87, with extract of sim tray...
Now, I'm using AEX oreo 8.1 on santoni....
Thanks a lot for help !
Thank you , worked for me too for Nitrogen OS
Glad i could help!
Best way is :
- Wipe - Format data - type "yes" - ok.
- and then install newest TWRP
i've tried all the steps provided but i still get bootloop

Bricked unlocked Mi5

Hello,
Would appreciate your help with this.
My device was officially unlocked, used to have lineage installed.
Once I've tried to install the recovery official global MIUI 9.1 (from
thread-1001529-1-1.html at en.miui.com) I got to a boot loop and now I can only boot to TWRP or to fastboot screen.
in TWRP, when I choose reboot, it shows me a message saying: "no OS installed!, are you sure you want to reboot?"
Would advanced wiping (other than Dalvik/ART cache , Cache & System) might help?
Any other way to go here?
Thanks,
Buli
Sounds more like you need to reinstall OS.
buliboom said:
Hello,
Would appreciate your help with this.
My device was officially unlocked, used to have lineage installed.
Once I've tried to install the recovery official global MIUI 9.1 (from
thread-1001529-1-1.html at en.miui.com) I got to a boot loop and now I can only boot to TWRP or to fastboot screen.
in TWRP, when I choose reboot, it shows me a message saying: "no OS installed!, are you sure you want to reboot?"
Would advanced wiping (other than Dalvik/ART cache , Cache & System) might help?
Any other way to go here?
Thanks,
Buli
Click to expand...
Click to collapse
Just reflash your rom+gapps , format data first(this will delete all data)and install rom from otg
Regards
Evan

Categories

Resources