Database Develop

Updating after root

Forgive me if this has been asked before. I did search, but I couldn't seem to find an answer to this.
I have a dev edition model. I really want to root, but have been holding off because there are bugs with the current build of Lollipop and I'm kind of hoping Moto will release a 5.02 update soon to kill the memory leak and other issues. That being said, I have really been itching for root.
If I did root, what would I have to do to this phone to update it to the new version? Would I have to completely return to stock and wipe? Or could I ADB sideload? Seems like I was reading that you can't update at all when you're rooted, even if you disable root.
Without any idea how much longer it'll be before the next update, I'm finding it harder and harder to hold off on root, but I don't want to go through hell to get it back to stock and update it.
Thanks for any help and sorry if this has already been asked.

From what I understand, root is fine. It is installing a custom recovery that will stop you from getting the OTA. You can very easily undo root. As a matter if fact, you can pretty easily reinstall the stock recovery also.

diggitydogg said:
From what I understand, root is fine. It is installing a custom recovery that will stop you from getting the OTA. You can very easily undo root. As a matter if fact, you can pretty easily reinstall the stock recovery also.
Click to expand...
Click to collapse
Thanks for the reply.
Most of the time, that's true. I have updated a lot of phones by simply unrooting, applying the update, and rooting again, or using ADB sideload and then just rooting. But from what I have been reading about the Moto X 2014, you have to completely restore it back to stock before doing anything, even if you just use the temp boot method to root.
Is that wrong? I can't seem to find any info that confirms either way.

I've installed custom recovery, how can I reverse it and install the original recovery for update?

One advantage of root is you'll have Titanium Backup, so even if you do have to do a full wipe before applying the update, you could just update it and restore everything back quickly using TiBu. With lollipop, apparently the update file checks for the entire system checksum as a whole instead of each file so any slight modification to the system will mostly require pure stock and this is the same even with the nexus. So yeah, you most likely have to wipe your device before updating. I'd say, wait till Xposed for Lollipop is out, its almost there, once it comes out go ahead and root it, it'll at least be worth the hassle then

If you're rooted with lollipop and want to take an OTA update you can flash stock recovery and the stock system image. At that point you should still have all apps/data and be able to take a OTA update. The recovery and system files should be the exact version you already have and of course anytime you flash realize you could lose data!

Steve-x said:
If you're rooted with lollipop and want to take an OTA update you can flash stock recovery and the stock system image. At that point you should still have all apps/data and be able to take a OTA update. The recovery and system files should be the exact version you already have and of course anytime you flash realize you could lose data!
Click to expand...
Click to collapse
Right. All you need to do is flash the stock /system partition and also the recovery if you replaced it. I don't know why everyone's talking about having to wipe the entire phone with the all the stock images.

I do not want to take OTA system updates...

I've unlocked the bootloader and rooted the phone with the help of the Nexus Root Toolkit by WugFresh.
I now have it setup just how I want it and I don't want an OTA to kill root or change anything so something stops working (phone isn't for me, but I've set it up just right for someone with special needs).
I've read conflicting information on whether or not an OTA will actually install on a rooted phone or not. Some things say that it won't if you've changed anything at all while others say it might be possible.
Is there some system file I can rename or something to ensure the phone doesn't get a system update unless I do it manually?

LaTropa64 said:
I've unlocked the bootloader and rooted the phone with the help of the Nexus Root Toolkit by WugFresh.
I now have it setup just how I want it and I don't want an OTA to kill root or change anything so something stops working (phone isn't for me, but I've set it up just right for someone with special needs).
I've read conflicting information on whether or not an OTA will actually install on a rooted phone or not. Some things say that it won't if you've changed anything at all while others say it might be possible.
Is there some system file I can rename or something to ensure the phone doesn't get a system update unless I do it manually?
Click to expand...
Click to collapse
no matter how many times you will try to update via ota, you will not be able to. if any files change from stock, any at all, you wont be able to install an ota. especially with root.

LaTropa64 said:
I've unlocked the bootloader and rooted the phone with the help of the Nexus Root Toolkit by WugFresh.
I now have it setup just how I want it and I don't want an OTA to kill root or change anything so something stops working (phone isn't for me, but I've set it up just right for someone with special needs).
I've read conflicting information on whether or not an OTA will actually install on a rooted phone or not. Some things say that it won't if you've changed anything at all while others say it might be possible.
Is there some system file I can rename or something to ensure the phone doesn't get a system update unless I do it manually?
Click to expand...
Click to collapse
Root solved your problem ha ha

simms22 said:
no matter how many times you will try to update via ota, you will not be able to. if any files change from stock, any at all, you wont be able to install an ota. especially with root.
Click to expand...
Click to collapse
And sometimes, even if one is 100% stock, those pesky OTAs won't install.

cam30era said:
And sometimes, even if one is 100% stock, those pesky OTAs won't install.
Click to expand...
Click to collapse
right. any system file changes prevent install.

Awesome. Thanks.
Will it even attempt to install an update, and if so, does it only attempt once and then give up so you don't get stuck in a loop?

Install a custom recovery. Done. OTAs require the stock recovery in order to flash files.

LaTropa64 said:
Awesome. Thanks.
Will it even attempt to install an update, and if so, does it only attempt once and then give up so you don't get stuck in a loop?
Click to expand...
Click to collapse
itll only attemp if you let it(it needs your approval to update), otherwise itll only tell you that an update is available. if you let it, itll try, but fail. if you boot up, youll be where you were before.

Apparently I rooted it incorrectly because it was able to update. I just got a call and the phone had rebooted and went through optimizing X of X apps and now many of the tasker profiles I had set are no longer working.
It wouldn't have optimized a bunch of apps if it hadn't updated the OS, or no?

LaTropa64 said:
Apparently I rooted it incorrectly because it was able to update. I just got a call and the phone had rebooted and went through optimizing X of X apps and now many of the tasker profiles I had set are no longer working.
It wouldn't have optimized a bunch of apps if it hadn't updated the OS, or no?
Click to expand...
Click to collapse
you can always look at your android version in aboy phone, to see if it updated or not.

LaTropa64 said:
Apparently I rooted it incorrectly because it was able to update. I just got a call and the phone had rebooted and went through optimizing X of X apps and now many of the tasker profiles I had set are no longer working.
It wouldn't have optimized a bunch of apps if it hadn't updated the OS, or no?
Click to expand...
Click to collapse
You'll find update or not optimizing apps happens a lot especially if you clear cache etc...
Your fine otas can't install with root
Just flash twrp it will cone in handy incase you brick it one day you'll have twrp to fastboot fix or sideload a rom to recover from.
ONE NOTE: Never ever ever relock your bootloader with the toolkit you'll be screwed. Always leave bootlaoder unlocked. I just had to rma manufacturer phone replacement I relock mine with toolkit and couldn't flash stock firmware or oem unlock again.
Sent from my LGMS769 using XDA Free mobile app

simms22 said:
you can always look at your android version in aboy phone, to see if it updated or not.
Click to expand...
Click to collapse
I'll take a look the next time I get over there. It's not my phone, I just set it up for someone with accessibility issues and wanted it to stay the same as the day I set it up but apparently it's not done that.

[Q] Updating rooted Nexus 6 question

I have an unlocked Nexus 6 64gb from Ebay that I activated on Verizon. I rooted it, installed 5.1 and did the build.prop and settings.db changes and have tethering, etc (unlimited).
A few questions:
Will the OTA update show up on my phone since it is rooted and/or since it was not purchased from Verizon?
If it does show up and I let it update to 5.1.1, will I need to do the build.prop and settings.db changes again?
If it does not show up and I install from Google's image, do I need to do the build.prop and settings.db changes again?
I am sure these are basic questions... sorry... this was my first phone root and will be my first update to apply since doing that.

an update will show up whether you have root or not, BUT.. you can not take or apply an ota if any system files have been changed. and guess what rooting your device did, change system files.

simms22 said:
an update will show up whether you have root or not, BUT.. you can not take or apply an ota if any system files have been changed. and guess what rooting your device did, change system files.
Click to expand...
Click to collapse
Ok thanks. So that means I update with the Google Image if I want to. I think there is an option to do that without a wipe. Is that recommended / OK? If so, I wont have to change any files again, right?

hifiaudio2 said:
Ok thanks. So that means I update with the Google Image if I want to. I think there is an option to do that without a wipe. Is that recommended / OK? If so, I wont have to change any files again, right?
Click to expand...
Click to collapse
factory image, or any custom rom. and yes, you can update via factory image and do it a certain way to not lose data. you dont ever "have to" change any files. if you keep it stock, completely, you get an update ota, and you keep goung after that. if you root, tou have choices. i keep my choices simple. i root and use custom kernels btw. i also use custom roms. so, for me, updating is just flashing the latest custom rom(be it stock/rooted or real cutom rom).

simms22 said:
factory image, or any custom rom. and yes, you can update via factory image and do it a certain way to not lose data. you dont ever "have to" change any files. if you keep it stock, completely, you get an update ota, and you keep goung after that. if you root, tou have choices. i keep my choices simple. i root and use custom kernels btw. i also use custom roms. so, for me, updating is just flashing the latest custom rom(be it stock/rooted or real cutom rom).
Click to expand...
Click to collapse
Thanks again for the help. So my wife has the exact phone and same root with hotspot enabled as I do. I forgot to tell her to ignore the update, so when the OTA verizon update showed up this morning, she installed it. Her phone still says 5.1, so I assume it just tried to install but didnt work, but the Hotspot icon was removed (I just went into settings and selected it again, and it seemed to work still), but I dont know what error it might have given when she tried to install or what settings or files that I had changed, like build.prop, etc, might be changed back. Is it likely that the system trying to install the OTA update would have changed my modified settings?
Going forward, I plan to fire up Wug's rootkit and just flash the 5.1.1 image with no wipe. SO everything I did on both phones should already be ready to go when the flash finishes, right? No settings for me to change all over again?

Will have to redo the build.prop edits. Full image flash will replace the build.prop with new one.

prdog1 said:
Will have to redo the build.prop edits. Full image flash will replace the build.prop with new one.
Click to expand...
Click to collapse
Cool, all done, thanks.

question about maintaining root

So far I've been running my OP3T with stock rom with TWRP recovery and SuperSU to have root. This was mostly because I wanted the Adaway and titanium backup to work. I undid everything so I could update to the latest OxygenOS version, and now I'm on the stock recovery too, but with bootloader still unlocked I believe. I no longer have root after doing the upgrade as far as I can tell, still a bit new to all this flashing, haha. The last time I did this was when the nexus 4 came out
What is the best option for maintaining root while still being able to upgrade smoothly? I'm not against using one of the custom ROMs if that will help, but I do kinda like the stock rom so far!
thanks!

bluesrph said:
So far I've been running my OP3T with stock rom with TWRP recovery and SuperSU to have root. This was mostly because I wanted the Adaway and titanium backup to work. I undid everything so I could update to the latest OxygenOS version, and now I'm on the stock recovery too, but with bootloader still unlocked I believe. I no longer have root after doing the upgrade as far as I can tell, still a bit new to all this flashing, haha. The last time I did this was when the nexus 4 came out
What is the best option for maintaining root while still being able to upgrade smoothly? I'm not against using one of the custom ROMs if that will help, but I do kinda like the stock rom so far!
thanks!
Click to expand...
Click to collapse
This thread should answer all your questions and doubts
https://forums.oneplus.net/threads/...-or-custom-recovery-without-data-loss.479265/

saurabh40629 said:
This thread should answer all your questions and doubts
https://forums.oneplus.net/threads/...-or-custom-recovery-without-data-loss.479265/
Click to expand...
Click to collapse
Thank you, I have seen that post. I'm guessing any route I go I'll have to flash updates then? I was hoping to find a way to be able to use OTA updates.
I've also never been able to get rid of the dm-verity error, even after going back to stock and locking the bootloader. Is there anything I need to worry about with that or is it just an annoyance?
Sent from my OnePlus3T using XDA Labs

bluesrph said:
Thank you, I have seen that post. I'm guessing any route I go I'll have to flash updates then? I was hoping to find a way to be able to use OTA updates.
I've also never been able to get rid of the dm-verity error, even after going back to stock and locking the bootloader. Is there anything I need to worry about with that or is it just an annoyance?
Click to expand...
Click to collapse
Dm-verity u can bypass but bootloader one, you can not. Look at the apps, mods section.

bluesrph said:
Thank you, I have seen that post. I'm guessing any route I go I'll have to flash updates then? I was hoping to find a way to be able to use OTA updates.
I've also never been able to get rid of the dm-verity error, even after going back to stock and locking the bootloader. Is there anything I need to worry about with that or is it just an annoyance?
Sent from my OnePlus3T using XDA Labs
Click to expand...
Click to collapse
You shouldn't try to flash the partial OTAs while you are rooted and have a custom recovery installed. The partial zip will try to make specific changes in the restricted partitions (/system, /boot, /recovery, etc.) related to the update and prior modifications to these files may cause the update to fail and the phone to brick. You can still use the "Update" tab in the Settings menu to download the update though as OOS will detect root and download the full zip of the update for you. Simply flash the full zip in TWRP, wipe cache/dalvik, then flash SuperSU and you're good to go the next time an update rolls out. Updating by this method (rooting immedately after flashing update) will also prevent OOS from replacing TWRP with the stock recovery again. When you download the update, you'll know if it's the full zip if the file is >1 GB (they're usually ~1.4 GB,, whereas the partial zips are a few hundred MB).
Unlocked bootloader warning screen is cannot be removed without relocked and fully resetting (wiping) the phone. DM-verity warning screen can be removed by following this guide. Make sure that you are flashing the correct firmware for you current version of OOS though, flashing the wrong version can brick you phone.

Can a rooted phone be updated?

Can a rooted phone be updated? If i root my razor, will i be able to update without re-rooting?

ChronosTrigger said:
Can a rooted phone be updated? If i root my razor, will i be able to update without re-rooting?
Click to expand...
Click to collapse
No, it fails to install. You need to reflash the stock boot image to take an OTA.

Confused still
CurtisMJ said:
No, it fails to install. You need to reflash the stock boot image to take an OTA.
Click to expand...
Click to collapse
I'm Sorry i'm so nooby in this regard.
So do you mean i have to basically get the stock ROM back again.
Then I can re-root like i did with the earlier version?

ChronosTrigger said:
I'm Sorry i'm so nooby in this regard.
So do you mean i have to basically get the stock ROM back again.
Then I can re-root like i did with the earlier version?
Click to expand...
Click to collapse
Yes. Razer's update engine doesn't seem to have the option to download full images like some other OEMs, so only fully stock ROM can be upgraded.
On that note, Razer seems to have set a week as the delay for releasing factory images, so if you want to keep root you might want to wait after an OTA, though we may be able to reproduce a slot earlier if someone captures the OTA package (but it's not as verifiable of course)

CurtisMJ said:
Yes. Razer's update engine doesn't seem to have the option to download full images like some other OEMs, so only fully stock ROM can be upgraded.
On that note, Razer seems to have set a week as the delay for releasing factory images, so if you want to keep root you might want to wait after an OTA, though we may be able to reproduce a slot earlier if someone captures the OTA package (but it's not as verifiable of course)
Click to expand...
Click to collapse
WARNING: This file is really intended for a developer to use in making a rooted slot. Flashing the file below could? remove root or cause other issues if you're rooted. Brick maybe? Although, mostly likely, it won't flash at all if you are rooted.
I used adb to capture the Razer Phone 2 MR2 OTA. It's located here.
I also downloaded it... but figure y'all would prefer a link straight to the Google source
SHA1 is the file name so you can verify it. E9F494FACBF8B7A6DF32F342C84459A7051ACE24
The SHA256 I calculated was: FF571E225BC81C8D450964E0C7BA28DF13E963798F9E5AF7E7C142DE7FBE51A5

translucentfocus said:
WARNING: Flashing the file below could? remove root or cause other issues if you're rooted. Brick maybe? I'm not rooted, just trying to help people get the files they need.
I used adb to capture the OTA. It's located here.
I also downloaded it... but figure y'all would prefer a link straight to the Google source
SHA1 is the file name so you can verify it. E9F494FACBF8B7A6DF32F342C84459A7051ACE24
The SHA256 I calculated was: FF571E225BC81C8D450964E0C7BA28DF13E963798F9E5AF7E7C142DE7FBE51A5
Click to expand...
Click to collapse
So With this. You can root, AND if they have any Update for the phone in the future, I can Update it without losing my root?

ChronosTrigger said:
So With this. You can root, AND if they have any Update for the phone in the future, I can Update it without losing my root?
Click to expand...
Click to collapse
Not quite... The update will likely fail to apply due to checksum failures. If it did go through it would probably brick the kernel so that's a good thing. Sorry, there's not really a way to automatically root after official OTAs as they update block by block between two known states, and neither is rooted. It's just sort of not possible, by design. You have to unroot, update and root again.
The OTA package translucentfocus has provided allows us to reproduce a single slot before the week's wait for the factory image so we can root sooner.

translucentfocus said:
WARNING: Flashing the file below could? remove root or cause other issues if you're rooted. Brick maybe? I'm not rooted, just trying to help people get the files they need.
I used adb to capture the OTA. It's located here.
I also downloaded it... but figure y'all would prefer a link straight to the Google source
SHA1 is the file name so you can verify it. E9F494FACBF8B7A6DF32F342C84459A7051ACE24
The SHA256 I calculated was: FF571E225BC81C8D450964E0C7BA28DF13E963798F9E5AF7E7C142DE7FBE51A5
Click to expand...
Click to collapse
which OTA is this? Also how to update

xterminater07 said:
which OTA is this? Also how to update
Click to expand...
Click to collapse
Sorry, I didn't specify. It's the MR2 update for the Razer Phone 2. Original reply has been also updated with version information in bold.
How to update? Actually, I posted the OTA because it's really for someone to make a slot with root before Razer releases the Factory MR2 Images--as @CurtisMJ mentioned previously.

CurtisMJ said:
Yes. Razer's update engine doesn't seem to have the option to download full images like some other OEMs, so only fully stock ROM can be upgraded.
On that note, Razer seems to have set a week as the delay for releasing factory images, so if you want to keep root you might want to wait after an OTA, though we may be able to reproduce a slot earlier if someone captures the OTA package (but it's not as verifiable of course)
Click to expand...
Click to collapse
Sorry to bring back an old thread but just a few questions if you don't mind.
I just bought a used Razer 2 seems like the user rooted it (I was unaware) and it has been years since I rooted anything. I downloaded root checker and it said I was rooted. I assume I'm running the stock rom, though magisk manager was installed on the phone when I turned it on so I guess it's not stock. I guess this means I can not take any OTA or it could brick? I went into system update and it still checked to make sure I was up to date so maybe OTA isn't disabled? So much has changed with apps and rooting since I messed with it that I don't know enough and I don't want to brick or bootloop the device.
Thanks

Univsoldur said:
Sorry to bring back an old thread but just a few questions if you don't mind.
I just bought a used Razer 2 seems like the user rooted it (I was unaware) and it has been years since I rooted anything. I downloaded root checker and it said I was rooted. I assume I'm running the stock rom, though magisk manager was installed on the phone when I turned it on so I guess it's not stock. I guess this means I can not take any OTA or it could brick? I went into system update and it still checked to make sure I was up to date so maybe OTA isn't disabled? So much has changed with apps and rooting since I messed with it that I don't know enough and I don't want to brick or bootloop the device.
Thanks
Click to expand...
Click to collapse
Yes, that sounds about right. When rooted the OTA function doesn't disable right away. Only after its downloaded an update and actually tries to apply it it'll refuse. The new Android update engine is pretty good at not bricking. My guess is probably stock. If it's rooted, then the bootloader is unlocked, and it's not too bad. For magisk root at least all you need to do is flash the stock boot image and the OTA will apply. With factory images around and an unlocked bootloader you'll have a hard time bricking it. Just don't untick "OEM Unlocking" in developer options. Ever. (Or at least until you've fully restored stock firmware. It's supposed to be disabled so you can't make that mistake but Magisk hide tricks the firmware into believing the bootloader is locked so it's enabled. Whaddayagonnado)

CurtisMJ said:
Yes. Razer's update engine doesn't seem to have the option to download full images like some other OEMs, so only fully stock ROM can be upgraded.
On that note, Razer seems to have set a week as the delay for releasing factory images, so if you want to keep root you might want to wait after an OTA, though we may be able to reproduce a slot earlier if someone captures the OTA package (but it's not as verifiable of course)
Click to expand...
Click to collapse
CurtisMJ said:
Yes, that sounds about right. When rooted the OTA function doesn't disable right away. Only after its downloaded an update and actually tries to apply it it'll refuse. The new Android update engine is pretty good at not bricking. My guess is probably stock. If it's rooted, then the bootloader is unlocked, and it's not too bad. For magisk root at least all you need to do is flash the stock boot image and the OTA will apply. With factory images around and an unlocked bootloader you'll have a hard time bricking it. Just don't untick "OEM Unlocking" in developer options. Ever. (Or at least until you've fully restored stock firmware. It's supposed to be disabled so you can't make that mistake but Magisk hide tricks the firmware into believing the bootloader is locked so it's enabled. Whaddayagonnado)
Click to expand...
Click to collapse
Thanks for the detailed response I managed to get up with the previous owner on swappa last night. He told me he unlocked the phone but never actually got around to rooting it. He also said it is running stock and the reason magisk is still on the phone after a wipe is because magisk persists after a wipe.
Messages from him.
Sorry about that, I did unlock the bootloader but I never actually got around to rooting. I usually relock the bootloader before I sell it but I completely forgot. You can apply an ota because I never installed a custom recovery, something else I didn't get around to doing. You can easily relock the bootloader using adb. If you need help with this let me know and I can walk you through it. But the bootloader being unlocked has zero effect on ota's. You are all good to go as far as that goes.
Oh no you're absolutely fine with an ota. I just looked it up and you're absolutely right, magisk does survive a reboot now. Since I didn't load a custom recovery though an ota will install just fine. Although when an ota does install though it will most likely remove magisk because it will write over the boot.img with the factory one. Here is the link to the factory images. It includes instructions on how to install it. But honestly a new ota should be released any time now since the last one I think was November. Once that installs you will be completely back to stock.
Does this sound accurate to y'all. Thanks again

@Univsoldur His knowledge seems a little dated. Kind of how mine was a few months ago Anyways here goes:
If a root checker says it's rooted then it probably is. I'm not sure why he says it isn't.
Magisk does indeed persist through a data wipe. I wasn't aware magiskinit could unpack the manager APK though. Neat
He's right in that an unlocked bootloader won't affect OTAs, but having magisk installed will.
The RP2 uses the new A/B update scheme. In this case it doesn't matter whether a custom recovery was ever installed. Recovery mode is not used during the process of installation. Unfortunately the new update scheme is also heavily based on deltas, even on the kernel image, so OTAs will be broken as it won't be able to retrieve a full kernel image from the OTA servers. Some OEMs' ROMs can do that, but Razer's can't. You can flash the factory images if you truly want a clean start, but to fix OTAs and remove magisk, reflashing just the kernel image with one from the factory image should be sufficient. The magisk uninstaller won't work due to the data wipe so that's probably the only option.

CurtisMJ said:
@Univsoldur His knowledge seems a little dated. Kind of how mine was a few months ago Anyways here goes:
If a root checker says it's rooted then it probably is. I'm not sure why he says it isn't.
Magisk does indeed persist through a data wipe. I wasn't aware magiskinit could unpack the manager APK though. Neat
He's right in that an unlocked bootloader won't affect OTAs, but having magisk installed will.
The RP2 uses the new A/B update scheme. In this case it doesn't matter whether a custom recovery was ever installed. Recovery mode is not used during the process of installation. Unfortunately the new update scheme is also heavily based on deltas, even on the kernel image, so OTAs will be broken as it won't be able to retrieve a full kernel image from the OTA servers. Some OEMs' ROMs can do that, but Razer's can't. You can flash the factory images if you truly want a clean start, but to fix OTAs and remove magisk, reflashing just the kernel image with one from the factory image should be sufficient. The magisk uninstaller won't work due to the data wipe so that's probably the only option.
Click to expand...
Click to collapse
So you think to get it back to stock I could just go here.
https://developer.razer.com/razer-phone-dev-tools/factory-images/
Will that remove magisk and return it back to stock I would assume there is no threat of flashing the stock image. Besides that do I need to mess with the kernel?

I'm wondering if it would be possible to flash the unlocked Razer phone 2 firmware to the AT&T version. Would the bootloader need to be unlocked?

Univsoldur said:
So you think to get it back to stock I could just go here.
https://developer.razer.com/razer-phone-dev-tools/factory-images/
Will that remove magisk and return it back to stock I would assume there is no threat of flashing the stock image. Besides that do I need to mess with the kernel?
Click to expand...
Click to collapse
Yes, that will return it to stock and remove Magisk. No, if you flash the factory image you don't need to do anything further with the kernel.
---------- Post added at 11:14 PM ---------- Previous post was at 11:11 PM ----------
DrGonzo6o said:
I'm wondering if it would be possible to flash the unlocked Razer phone 2 firmware to the AT&T version. Would the bootloader need to be unlocked?
Click to expand...
Click to collapse
The bootloader needs to be unlocked, yes. I had the unlocked one from the start, so I can't comment on how well that will work though.
Has anyone with an AT&T version successfully flashed unlocked firmware?

Univsoldur said:
So you think to get it back to stock I could just go here.
https://developer.razer.com/razer-phone-dev-tools/factory-images/
Will that remove magisk and return it back to stock I would assume there is no threat of flashing the stock image. Besides that do I need to mess with the kernel?
Click to expand...
Click to collapse
I did post a full unroot guide...