Database Develop

Bricked

HI mates,
I flashed a image and now my phone won't boot its not going into recovery neither its booting into rom or into boat loader (power+vol up) what should i do it shows logo only and reboots automatically to the same screen, attached via usb not detected by pc.

FarrukhQadri said:
HI mates,
I flashed a image and now my phone won't boot its not going into recovery neither its booting into rom or into boat loader (power+vol up) what should i do it shows logo only and reboots automatically to the same screen, attached via usb not detected by pc.
Click to expand...
Click to collapse
First this thread go to [Q&A]
Have you flasht a wrong kernel ? Try to flash stock Boot.IMG for your rom .
If that is not helping place full Rom as a sample (B609) on youre external sdcard under dload/ and that Boot youre fon with all three buttons
Sent from my p7_l10 using XDA Free mobile app

Araca said:
First this thread go to [Q&A]
Have you flasht a wrong kernel ? Try to flash stock Boot.IMG for your rom .
If that is not helping place full Rom as a sample (B609) on youre external sdcard under dload/ and that Boot youre fon with all three buttons
Sent from my p7_l10 using XDA Free mobile app
Click to expand...
Click to collapse
yes i think i have flashed wrong image.
i have my rom installed in the phone which is stock based so i should flash its image? i would be thankful for your help.

FarrukhQadri said:
yes i think i have flashed wrong image.
i have my rom installed in the phone which is stock based so i should flash its image? i would be thankful for your help.
Click to expand...
Click to collapse
Connect your device to the PC, and ADB is gonna be accessible for 2-4 seconds while the logo is loading (bootanimation), by that time you can flash recovery using fastboot flash recovery recovery.img or simply enter bootloader mode by (i think) holding power up + vol up + vol down buttons. After you have access to the recovery, things are gonna be easier as you can flash ROM's, kernels etc etc. (either via ADB or the recovery itself)
Best regards,
James

Daentrod said:
Connect your device to the PC, and ADB is gonna be accessible for 2-4 seconds while the logo is loading (bootanimation), by that time you can flash recovery using fastboot flash recovery recovery.img or simply enter bootloader mode by (i think) holding power up + vol up + vol down buttons. After you have access to the recovery, things are gonna be easier as you can flash ROM's, kernels etc etc. (either via ADB or the recovery itself)
Best regards,
James
Click to expand...
Click to collapse
let me try this ... bro after getting bricked its not even charging .

Resolved
Thank you Everyone for helping and guiding issue is resolved your help is always appreciated...

how?
How?

same problem here with my P7 L00 , forum should work both ways, would be nice if you could post solution... tks

Most likely the solution from #4.
Also note that you can easily enter bootloader mode by
a.) disconnecting device and powering it off completely
b.) holding down VOL DOWN and connecting device until it boots into bootloader mode
(Similarly, if you hold down VOL UP you can enter recovery.)
In bootloader mode, flash the correct recovery, then you can do the three button update with update.app in the dload folder.

g4b3rm4n said:
Most likely the solution from #4.
Also note that you can easily enter bootloader mode by
a.) disconnecting device and powering it off completely
b.) holding down VOL DOWN and connecting device until it boots into bootloader mode
(Similarly, if you hold down VOL UP you can enter recovery.)
In bootloader mode, flash the correct recovery, then you can do the three button update with update.app in the dload folder.
Click to expand...
Click to collapse
ok tks !, that s actually what I did, the only thing is that I m still stucked cause I cannot get get into forced update by pressing the 3 buttons : saved dload folder in otg usb but when I press 3 buttons I get back to recovery ?

maurolm said:
ok tks !, that s actually what I did, the only thing is that I m still stucked cause I cannot get get into forced update by pressing the 3 buttons : saved dload folder in otg usb but when I press 3 buttons I get back to recovery ?
Click to expand...
Click to collapse
Did you flash the correct stock recovery for the device? Not having the correct recovery might just throw you into the recovery instead of flashing the software. Also, the recovery should be unzipped inside the dload folder (some people forget this).

tks! using TWRP 2.8.7.0 that runs ok on EMUI 3.0 - not original recovery - maybe that s why then I can t get to force download?

maurolm said:
tks! using TWRP 2.8.7.0 that runs ok on EMUI 3.0 - not original recovery - maybe that s why then I can t get to force download?
Click to expand...
Click to collapse
When you flash stock recovery, make sure that you're using exact version of the ROM.
Like if you had B609 you should use B609 recovery image and no other!
I made the mistake of using B621 recovery image on a B609, thinking "well it's the same, both are KitKat and both are EMUI 3.0" but NO! I was wrong.
Don't make the same mistake i did.
Let me know if you get stuck

maurolm said:
tks! using TWRP 2.8.7.0 that runs ok on EMUI 3.0 - not original recovery - maybe that s why then I can t get to force download?
Click to expand...
Click to collapse
Yes, that is the problem - *only* stock recovery can install stock ROMs and updates! Depending on your base version, you should install the recovery for the BXXX ROM (e.g.: if you are on CWM flashable B609, flash the recovery for B609, etc.).

tks all, I will flash stock recory and post back
follow up: TWRP was the issue, flashed stock recovery and was good to go...running EMUI 3.1 android 5.1 already, tks for all!

Can't enter recovery mode after installing TWRP

Hello everyone,
I bought a few days ago the Honor 5C and decided to root it. So I installed the TWRP (Nemo) using "fastboot", downloaded a ZIP of SuperSU and placed at the root of the internal storage. But when I try to enter recovery mode by using "adb reboot recovery" or by pressing the Volume Up + Power buttons, the phone vibrates, displays nothing for 2-3 seconds (not even a black screen, the screen is completely off). After that the "Honor" logo is dispayed for less than a second then the screen "Your device has been unlocked and can't be trusted [...] Your device is booting now..." with no option at all.
The problem is that this screen stays forever and never displays the recovery mode screen. If I entered this mode using the physical buttons, I can just press "Power" for a few seconds and then it reboots the phone normally. But if I used "adb", each reboot makes the phone entering again the same recovery mode that doesn't work, so I use the Volume Up + Power key while the phone is connected via USB to my laptop to enter e-recovery mode, then reboot normally.
Does anyone know how to solve this problem ? I really want to root my phone but I don't know what to do for now.
Thanks by advance for your answers !

ClementNerma said:
Hello everyone,
I bought a few days ago the Honor 5C and decided to root it. So I installed the TWRP (Nemo) using "fastboot", downloaded a ZIP of SuperSU and placed at the root of the internal storage. But when I try to enter recovery mode by using "adb reboot recovery" or by pressing the Volume Up + Power buttons, the phone vibrates, displays nothing for 2-3 seconds (not even a black screen, the screen is completely off). After that the "Honor" logo is dispayed for less than a second then the screen "Your device has been unlocked and can't be trusted [...] Your device is booting now..." with no option at all.
The problem is that this screen stays forever and never displays the recovery mode screen. If I entered this mode using the physical buttons, I can just press "Power" for a few seconds and then it reboots the phone normally. But if I used "adb", each reboot makes the phone entering again the same recovery mode that doesn't work, so I use the Volume Up + Power key while the phone is connected via USB to my laptop to enter e-recovery mode, then reboot normally.
Does anyone know how to solve this problem ? I really want to root my phone but I don't know what to do for now.
Thanks by advance for your answers !
Click to expand...
Click to collapse
Are you on EMUI 5 (Android Nougat) ? If so, official TWRP is not compatible with version > EMUI 4.x for now.

I'm using EMUI 5.0 / Android 7.0.
So now I've installed an incompatible TWRP can I just downgrade to EMUI 4.0 / Android 5.0 then flash it again and root my phone or should I reflash the original recovery before doing that ? I've read somewhere that updating a rooted phone could brick it so even if mine has just a TWRP and want to downgrade instead of upgrading I prefer to be sure.
Thanks by advance !

ClementNerma said:
I'm using EMUI 5.0 / Android 7.0.
So now I've installed an incompatible TWRP can I just downgrade to EMUI 4.0 / Android 5.0 then flash it again and root my phone or should I reflash the original recovery before doing that ? I've read somewhere that updating a rooted phone could brick it so even if mine has just a TWRP and want to downgrade instead of upgrading I prefer to be sure.
Thanks by advance !
Click to expand...
Click to collapse
you need install original recovery and extract update.app from B100 firmware, then you place it to "dload" folder in your sd card and flash using 3 buttons. you cant full brick by messing with root. only soft brick which is fixable.

Ok I'll try it. I will post again if something comes wrong.
Thanks a lot for your help

I forgot to ask about one thing : I'm owning a phone with NEM-L51 model and I don't know if I can use NEM-L22 firmware ? If I can't, where can I find the right files to downgrade this specific model ? All the firmware files I see on the web are for the NEM-L22...
EDIT : I've found the B102 firmware for NEM-L51 model (Europe + UK) can I take it for the downgrade or is the B100 specific version needed ?

ClementNerma said:
Hello everyone,
I bought a few days ago the Honor 5C and decided to root it. So I installed the TWRP (Nemo) using "fastboot", downloaded a ZIP of SuperSU and placed at the root of the internal storage. But when I try to enter recovery mode by using "adb reboot recovery" or by pressing the Volume Up + Power buttons, the phone vibrates, displays nothing for 2-3 seconds (not even a black screen, the screen is completely off). After that the "Honor" logo is dispayed for less than a second then the screen "Your device has been unlocked and can't be trusted [...] Your device is booting now..." with no option at all.
The problem is that this screen stays forever and never displays the recovery mode screen. If I entered this mode using the physical buttons, I can just press "Power" for a few seconds and then it reboots the phone normally. But if I used "adb", each reboot makes the phone entering again the same recovery mode that doesn't work, so I use the Volume Up + Power key while the phone is connected via USB to my laptop to enter e-recovery mode, then reboot normally.
Does anyone know how to solve this problem ? I really want to root my phone but I don't know what to do for now.
Thanks by advance for your answers !
Click to expand...
Click to collapse
It is easy bro . When the phone shows warning logo , click volume up + power and don't leave it untill it find a vibration . Leave the buttons after 3 seconds u felt vibration

gopinaidu77 said:
It is easy bro . When the phone shows warning logo , click volume up + power and don't leave it untill it find a vibration . Leave the buttons after 3 seconds u felt vibration
Click to expand...
Click to collapse
Thanks for your help but this doesn't work. When I do what you say it goes again and again to the same warning screen which never disappears. This is really strange, when I see videos I find on YouTube all Honor 5C owners that just do what you say enter in recovery mode, but it's not my case... I really wonder why.
I don't know if that can help you to understand, but I'm using a french Honor 5C phone, with EMUI 5.0 / Android Nougat like I said previously, model is NEM-L51 and I did the Android Nougat update several days ago using the Honor's official update application, which is natively installed on the phone.
About the firmwares, I've tried the B102 version for the specific model I own but each time (I downloaded the update ZIP several times, the first one with two folders named '1-main' and '2-vendor', the second with just the 'dload' files) the update stops at 5 purcents and says "Software install failed! Incompatibility with current version. Please download the correct update package."
What can I do to solve this problem ?

ClementNerma said:
Thanks for your help but this doesn't work. When I do what you say it goes again and again to the same warning screen which never disappears.
About the firmwares, I've tried the B102 version for the specific model I own but each time (I downloaded the update ZIP several times, the first one with two folders named '1-main' and '2-vendor', the second with just the 'dload' files) the update stops at 5 purcents and says "Software install failed! Incompatibility with current version. Please download the correct update package."
What can I do to solve this problem ?
Click to expand...
Click to collapse
When u click on vol up + power in warning screen .dont leave it till it shows erecovery . Probably its 6-7 seconds

gopinaidu77 said:
When u click on vol up + power in warning screen .dont leave it till it shows erecovery . Probably its 6-7 seconds
Click to expand...
Click to collapse
When you do Volume Up + Power it attemps to enter recovery mode, not recovery (that's what I read), excepted if a USB cable is plugged in (which is not my case). And that still doesn't work.
However, I'm able to enter erecovery mode by turning on the phone with only the Power button, then holding "Volume Up" as written on the screen (there are 3 boot options that shows up, but only when I boot normally) and I enter erecovery mode. But I can't do anything interesting in this mode, just download the latest firmware (which fails at each attempt, even when I'm connected to a working WiFi point), shutdown or reboot the phone normally.
Shoud I show you a video of when I boot my phone in normal mode / recovery mode / erecovery mode ?

ClementNerma said:
When you do Volume Up + Power it attemps to enter recovery mode, not recovery (that's what I read), excepted if a USB cable is plugged in (which is not my case). And that still doesn't work.
However, I'm able to enter erecovery mode by turning on the phone with only the Power button, then holding "Volume Up" as written on the screen (there are 3 boot options that shows up, but only when I boot normally) and I enter erecovery mode. But I can't do anything interesting in this mode, just download the latest firmware (which fails at each attempt, even when I'm connected to a working WiFi point), shutdown or reboot the phone normally.
Shoud I show you a video ?
Click to expand...
Click to collapse
No i understood

gopinaidu77 said:
No i understood
Click to expand...
Click to collapse
The problem is that I can't enter recovery mode, each time I try to install an OTA or full update package from the /dload folder on the SD card it fails, so I can't downgrade at all. Do you know a link that sure points to the good update package version for the Honor 5C on EMUI 5.0 in order to downgrade to Marshmallow ? I've found several links during my searches but I don't know if the installation fails because of a phone's bug or if it fails because of an invalid version.
EDIT : I forgot to precise the long model name of my phone : NEM-L51C432B350. On Firmware Finder Rewrite it shows that there are only two update packages for it, published on 20.04.2017... So I wonder if I need to download the three files shown in the filelist of the big update (1.68 Gb) and install them on the device ?

ClementNerma said:
The problem is that I can't enter recovery mode, each time I try to install an OTA or full update package from the /dload folder on the SD card it fails, so I can't downgrade at all. Do you know a link that sure points to the good update package version for the Honor 5C on EMUI 5.0 in order to downgrade to Marshmallow ? I've found several links during my searches but I don't know if the installation fails because of a phone's bug or if it fails because of an invalid version.
Click to expand...
Click to collapse
Stock recovery wont have an option . There is no graphical UI for installation.
Downgrade or update is just a manual procedure.
In order to roll back , u need to install a roll back package and then the origional MM package . Using the three button combination

gopinaidu77 said:
Stock recovery wont have an option . There is no graphical UI for installation.
Downgrade or update is just a manual procedure.
In order to roll back , u need to install a roll back package and then the origional MM package . Using the three button combination
Click to expand...
Click to collapse
Ok but where can I find this rollback package ? I only find files for the NEM-L22 model...
EDIT : If found the Russian version from here but is it ok to take it ?

ClementNerma said:
Ok but where can I find this rollback package ? I only find files for the NEM-L22 model...
EDIT : If found the Russian version from here but is it ok to take it ?
Click to expand...
Click to collapse
Yes that's fine.

gopinaidu77 said:
Yes that's fine.
Click to expand...
Click to collapse
Ok so in the guide I found on the same page I linked in my previous post (the guide is hopefully written in english) it says that the phone must haven't been rooted or even unlocked, so I prefered to relock the bootloader (and completely reset my phone, for the third time at least in two days).
But then I realized I would need to have an unlocked bootloader for the flash so I unlocked it again, but now the device stucks on "Your device is booting now..." with no option at all whatever I do, whatever the buttons I push... I'll really start to think I'm simply idiot
I'm searching on how to solve this new problem and unbrick the phone... 'cause I can't even shutdown it, the "Volume Up + Power" combination while USB plugged in or anything else doesn't work this time.
EDIT : Okay so my phone seems to really be hard-bricked. My phone just stays at the screen "Your device is booting now..." with no option at all, I can't shutdown it, I can't enter recovery or erecovery mode. Does anyone know what to do or is my phone definitively bricked ?

ClementNerma said:
Ok so in the guide I found on the same page I linked in my previous post (the guide is hopefully written in english) it says that the phone must haven't been rooted or even unlocked, so I prefered to relock the bootloader (and completely reset my phone, for the third time at least in two days).
But then I realized I would need to have an unlocked bootloader for the flash so I unlocked it again, but now the device stucks on "Your device is booting now..." with no option at all whatever I do, whatever the buttons I push... I'll really start to think I'm simply idiot
I'm searching on how to solve this new problem and unbrick the phone... 'cause I can't even shutdown it, the "Volume Up + Power" combination while USB plugged in or anything else doesn't work this time.
EDIT : Okay so my phone seems to really be hard-bricked. My phone just stays at the screen "Your device is booting now..." with no option at all, I can't shutdown it, I can't enter recovery or erecovery mode. Does anyone know what to do or is my phone definitively bricked ?
Click to expand...
Click to collapse
Long click of power button will shut down the phone. Why u always refer about usb cable . Follow all instructions unplugged
Even the same happend for my honor 8 . Ur device isnt hard bricked .its just a soft brick

gopinaidu77 said:
Long click of power button will shut down the phone.
Even the same happend for my honor 8 . Ur device isnt hard bricked .its just a soft brick
Click to expand...
Click to collapse
Nope, long click of power button will just reboot the phone and make it displaying the same screen again and again.... I can't shutdown it at all. I've tried several times but it doesn't work :crying:

ClementNerma said:
Nope, long click of power button will hust reboot the phone and make it displaying the same screen again and again.... I can't shutdown it at all. I've tried several times but it doesn't work :crying:
Click to expand...
Click to collapse
Yes , the same happend for me ! U can unbrick bro

gopinaidu77 said:
Yes , the same happend for me ! U can unbrick bro
Click to expand...
Click to collapse
But how can I unbrick the phone ? I can't enter in any mode, I can't connect it to PC, I can't shutdown the phone, I can't use ADB or FastBoot on it, I can't reflash the bootloader or install a TWRP, downgrade or boot normally, I can't do anything !
So how could I unbrick it ? For now it's just still displaying "Your device is booting now..."
If you know how to do, please tell me so I can unbrick my phone. Sorry for asking you so many things I don't understand myself why there are so many problems...

stuck on 'encryption unsuccessful' screen

hi. zuk z2 pro
stuck on encryption unsuccessful screen. only reset or reboot available.
when trieng to enter recovery (vol up+down+power) i get only reboot power off and update options.
can't enter fastboot (vol down + power) its keep rebooting me.
what can i do to save my device ?
thanks

havlaz said:
hi. zuk z2 pro
stuck on encryption unsuccessful screen. only reset or reboot available.
when trieng to enter recovery (vol up+down+power) i get only reboot power off and update options.
can't enter fastboot (vol down + power) its keep rebooting me.
what can i do to save my device ?
thanks
Click to expand...
Click to collapse
Reflash stock rom via qfil, u can search it on zukfans.eu

Starchm said:
Reflash stock rom via qfil, u can search it on zukfans.eu
Click to expand...
Click to collapse
i cant seems to to enter the right mode.
becouse i succesed to enter fastboot, so i opened the bootloader, and flashed twrp, but every rom i flash.. i stuck on bootloop.
so i tried what you told me, and it keep poping the unlock menu. do i need to relock bootloader ?

havlaz said:
i cant seems to to enter the right mode.
becouse i succesed to enter fastboot, so i opened the bootloader, and flashed twrp, but every rom i flash.. i stuck on bootloop.
so i tried what you told me, and it keep poping the unlock menu. do i need to relock bootloader ?
Click to expand...
Click to collapse
If u reflash stock 1.9 rom then it will automaticly lockdown

Starchm said:
If u reflash stock 1.9 rom then it will automaticly lockdown
Click to expand...
Click to collapse
yes i know, but i cant get to a point that i can flash...

Any progress on this one ? I have the exact same problem.

Please help me I feel so frustrated.

My device is Mi Max 2 today I tried flashing some custom rom which is because yesterday it was normal but it suddenly restarted when I tried booting it up it went to recovery mode btw my recovery mode is TWRP so I tried to just flash a rom again but after its done flashing It keeps booting into TWRP so I was searching online and decided to go back to stock I used the Miflash but after it successfully flashing again This time I can no longer access bootloader my volume up does not work anymore only down and power and im back to stock recovery mode tried accessing MiPcSuite but to still no avail. Please help im seriosly sad like frustrated beacuse I have been trying to find for a fix since yesterday.
Is my volume up broken? is it the reason why I can't access the bootloader. everything went south since yesterday.
I would like to add that the power and the volume buttons where acting funny yeterday when it was doing just fine could it be my volume button but why does it keep booting on TWRP Thinking about it I was getting out of the bath could have damage the volume buttons or something

Is your volume down button is working ??
please help me 12 said:
My device is Mi Max 2 today I tried flashing some custom rom which is because yesterday it was normal but it suddenly restarted when I tried booting it up it went to recovery mode btw my recovery mode is TWRP so I tried to just flash a rom again but after its done flashing It keeps booting into TWRP so I was searching online and decided to go back to stock I used the Miflash but after it successfully flashing again This time I can no longer access bootloader my volume up does not work anymore only down and power and im back to stock recovery mode tried accessing MiPcSuite but to still no avail. Please help im seriosly sad like frustrated beacuse I have been trying to find for a fix since yesterday.
Is my volume up broken? is it the reason why I can't access the bootloader. everything went south since yesterday.
I would like to add that the power and the volume buttons where acting funny yeterday when it was doing just fine could it be my volume button but why does it keep booting on TWRP Thinking about it I was getting out of the bath could have damage the volume buttons or something
Click to expand...
Click to collapse
By using volume down and power you can boot to fastboot and then try flashing the Rom using fastboot method
Second if you find other max 2 , you can restore the partition from other max 2, partition you have to restore are boot , system, system image, cust ( dont restore efs ,firmware partitions

beingtejas said:
By using volume down and power you can boot to fastboot and then try flashing the Rom using fastboot method
Second if you find other max 2 , you can restore the partition from other max 2, partition you have to restore are boot , system, system image, cust ( dont restore efs ,firmware partitions
Click to expand...
Click to collapse
Sorry for late reply Im stuck at the Mi-Recovery 3.0 I cant access fastboot. only recovery

Did you unlocked the bootloader
please help me 12 said:
Sorry for late reply Im stuck at the Mi-Recovery 3.0 I cant access fastboot. only recovery
Click to expand...
Click to collapse
Did you tried volume - and power button to get into fastboot.
If your device boots you can also try adb method to boot into bootloader ( fastboot)

beingtejas said:
Did you tried volume - and power button to get into fastboot.
If your device boots you can also try adb method to boot into bootloader ( fastboot)
Click to expand...
Click to collapse
I did but it just boots me up into fastboot mode btw I got this into service center and they tried using EDL and flash a rom but after flashing it still only boots into recovery mode

If it boots into fastboot mode you can use commands to flash stock miui rom from ther
please help me 12 said:
I did but it just boots me up into fastboot mode btw I got this into service center and they tried using EDL and flash a rom but after flashing it still only boots into recovery mode
Click to expand...
Click to collapse
I have the whole detailed process before , you will find if you search the thread..

beingtejas said:
I have the whole detailed process before , you will find if you search the thread..
Click to expand...
Click to collapse
Well the thing is after flashing the official rom it still boots back into recovery mode.

Then you have to try flashing again
please help me 12 said:
Well the thing is after flashing the official rom it still boots back into recovery mode.
Click to expand...
Click to collapse
If you can.. tell one thing , do your device is able to boot in fastboot ??

beingtejas said:
If you can.. tell one thing , do your device is able to boot in fastboot ??
Click to expand...
Click to collapse
heres an update I was somehow able to boot into fastboot mode and installed TWRP and then I tried to flash ROM's into it it says sucessfully but it boots me right into TWRP again.

beingtejas said:
If you can.. tell one thing , do your device is able to boot in fastboot ??
Click to expand...
Click to collapse
is there somewhere we can chat?

https://chat.stackexchange.com/rooms/94776/discussion-on-question-by-need-help-mi-max-2-soft-bricked check this up theres also one guy whos helping if you want to help just use this.

S10e bootloop and no acces to recovery and Download mode... plzz help ! :'(

hi all. i just install the Beta of ONEUI 2 and android 10 on my S10e, (using the update.zip with adb in recevery) and now my S10e is "bootlooping" with no acces to recovery and download mode... impossible for me at the moment to reflash a clean ROM with odin... can you help? or my phone is definitivly DEAD??? :/ thx you all...

Maybe you tell the situation in the correct thread, where you load the firmware?
There more dudes, who flashed the rom and known the bug (soft brick?).
I use the official beta of the android 10 firmware & can't directly support.
Good luck.

blazethelight said:
Maybe you tell the situation in the correct thread, where you load the firmware?
There more dudes, who flashed the rom and known the bug (soft brick?).
I use the official beta of the android 10 firmware & can't directly support.
Good luck.
Click to expand...
Click to collapse
hi, i load the Firmware from this link
https://forum.xda-developers.com/s10-plus/how-to/galaxy-s10-sm-g975f-official-oneui2-10-t3980879
yes it's a soft brick, the phone boot to the Samsung logo, with the little vibration, and reboot again and again. recovery and download buttons manipulations not work..

Nyzoka said:
hi, i load the Firmware from this link
https://forum.xda-developers.com/s10-plus/how-to/galaxy-s10-sm-g975f-official-oneui2-10-t3980879
yes it's a soft brick, the phone boot to the Samsung logo, with the little vibration, and reboot again and again. recovery and download buttons manipulations not work..
Click to expand...
Click to collapse
To enter download mode, put usb cable into your phone, press and hold vol down button without bixby button, make sure your screen comes to black(total shut down if its on bootloop), then put the usb cable into your pc. It should detect your phone

Nyzoka said:
hi all. i just install the Beta of ONEUI 2 and android 10 on my S10e, (using the update.zip with adb in recevery) and now my S10e is "bootlooping" with no acces to recovery and download mode... impossible for me at the moment to reflash a clean ROM with odin... can you help? or my phone is definitivly DEAD??? :/ thx you all...
Click to expand...
Click to collapse
Hi,the only thing you can do is reflash with odin.
It is because you had unlocked bootloader.
When you have unlocked bl and flash Q it will bootloop.

yesterday I had the same problem (update beta Q with BL unlock). I couldn't open either downloading mod or recovery. Bootloop. I left the phone "resting" overnight and tried again in the morning. Hold Volume- and Bixby together and then connect the PC cable. download mod opened(possibly a coincidence). Odin worked.
Odesláno z mého SM-G970F pomocí Tapatalk

thx you all

Nyzoka said:
hi, i load the Firmware from this link
https://forum.xda-developers.com/s10-plus/how-to/galaxy-s10-sm-g975f-official-oneui2-10-t3980879
yes it's a soft brick, the phone boot to the Samsung logo, with the little vibration, and reboot again and again. recovery and download buttons manipulations not work..
Click to expand...
Click to collapse
try letting the phone die then when bootloop stops inset cable and do the download mode combo, failing that when the device is looping does it connect sucsessfully to your computer because i had a similar experiance, at the samsung logo screen although display was looping adb commands did acually work, i then entered adb reboot download in cmd prompt and the download screen appeard and was odin compatible for a complete reflash of the firmware with magisk patched AP file
i hope this helps !! best of luck my friend

Are you fixed?
Nyzoka said:
thx you all
Click to expand...
Click to collapse
hello are you fixed? I have the same problem

marcelito29 said:
hello are you fixed? I have the same problem
Click to expand...
Click to collapse
there 3 of us
i have same problem, can not enter to any mode

marcelito29 said:
hello are you fixed? I have the same problem
Click to expand...
Click to collapse
Hello,
I've the same problem. To fix it :
- Go to recovery mode (when your phone is shutdown, press Bixby+Vol Up + Power and realase all after Samsung's Logo)
- Wipe Cache
- Wipe System
- Reboot System

I have the same problem on my Samsung Galaxy A7 2018. It keeps showing every 5 seconds the logo in an infinite bootloop and i cannot enter recovery or download mode. Any help?

Tantalord said:
I have the same problem on my Samsung Galaxy A7 2018. It keeps showing every 5 seconds the logo in an infinite bootloop and i cannot enter recovery or download mode. Any help?
Click to expand...
Click to collapse
sorry, i don't know if it's been fixed but if have read the thread you will noticed that there isn't a quick fix until you wait till the device goes off, then either your boot into recovery mode (wipe, cache, reset and reboot) or download mode (flash stock rom with odin).

xdagee said:
sorry, i don't know if it's been fixed but if have read the thread you will noticed that there isn't a quick fix until you wait till the device goes off, then either your boot into recovery mode (wipe, cache, reset and reboot) or download mode (flash stock rom with odin).
Click to expand...
Click to collapse
This is why I have hate not being take the battery out of a device. Atleast the S10 doesn't seem likes it's too hard, if it were me I probably just remove the back cover and pop the battery out rather than wait for the battery to die. The back cover seems to just snap off and on, almost like they could have just made it removable in the first place, but then of course too many people would just buy new batteries when they wear out rather than a new phone. Gotta love planned obsolescence.