hi friends, i need so much your help!.
I have xaiomi mi5, the operating system of the cellphone has been updated, and then the device has entered the loop.
He can not get up at all.
I've tried to do so far:
FAST BOOT - but even the computer can not read the device despite all the permissions I have approved for the computer.
MIPCSUIT - does not work well because the computer does not recognize the device.
Your help must be smart and good people!
I am also stuck with the same problem.
At least I can get fastboot.
I think if you OK to loose data then just go to recovery mode with Volume up + power button pressed together. And wipe all. This may solve the problem. But I don't want to loose data I am skipping this option.
If any one knows other way to unbrick without full wipe then please let us know.
Thanks
have you unlocked bootloader?
you can try run by fastboot twrp recovery mode.
Code:
fastboot boot twrp.img
after few seconds phone boot to recovery, you can encrypt the phone and copy data.
twrp is here
My bootloader is locked I think.
I tried that command. Didn't boot to twrp.
Any other way.
Anyway Thanks for suggesting.
Are you on latest MIUI global stable? I think Xiaomi's guys ****ed it up this time around and got bootloop for everybody on latest update.
Take a read here and good luck: http://en.miui.com/thread-2776961-1-1.html
ok listen me... if you have got unlock permission and unlocked your phone or you have unlock code.. you must bind your acc with other xiaomi phone easly enter your acc and bind acc now go fastboot download mi flash unlocker install adb driver and unlock then you can flash stock rom i had that problem and i solved
Hello,
I had similar issue.
To be able to start phone/miui you should remove sim card,
in my case it was connected to connecting to cell network that caused reboot.
Than it will be possible to update phone using WiFi.
For me issue was solved with V9.5.2.0.NAAMIFA update.
BR Jarek.
jarek102 said:
Hello,
I had similar issue.
To be able to start phone/miui you should remove sim card,
in my case it was connected to connecting to cell network that caused reboot.
Than it will be possible to update phone using WiFi.
For me issue was solved with V9.5.2.0.NAAMIFA update.
BR Jarek.
Click to expand...
Click to collapse
Lifesaver here!
This worked perfectly for me! Go figure?
Cheers
You can try
I tried version gemini global images v10.2.2.0. OAAMIXM 2019115 GLOBAL but failed then tried v8.11.22.20181122.000 8.0 GLOBAL but failed then 2 month later i tried with good battery and good on off and main important is version GEMINI GLOBAL IMAGES 6.11.10 _20161110 and version GEMINI GLOBAL IMAGES V7.2.4.0.MAAMIDC 20160129. AND GUESS WHAT SUCCESS. NEVER TRY WITHOUT BATTERY AND WITHOUT EDL POINT. EDL POINT FOR UNLOCKING BOOTLOCK AND DOWNLOAD SOFTWARE FLASH FILES WITH GOOD INTERNET WITHOUT INTERUPPT SO FLASH SUCCESS. MY 2 MOTHERBOARD OF MI5 SAVED WITHOUT HARDWARE. HOW TO KNOW SOFTWARE OR HARDWARE....1ST CHECK CHARGING HAPPENING OR NOT IN SWITCH OFF AND CAN IT GO TO FASTBOOT MODE OR RECOVERY MODE. IF ALL THIS GOOD GO FOR FLASH IN SAME PROCESS. OTHERWISE HARDWARE AS STATED THAT RESISTOR ALSO PLAY A VITAL ROLE IN BOOTING OR STUCK AT MI LOGO. MOISTURE IN PHONE UNDER IC REQUIRE HEAT WITH PASTE AT HARDWARE LEVEL.
Hey guys, I’ve purchased a k20 pro 6/128 variant here in Trinidad and Tobago from Let’s Talk phone company which imports phones and sell it here in Trinidad and Tobago. No one else sells the device here in my country.
When I opened my phone and started using it, I saw that it was the fake global rom which was installed on it. So I came onto here to try to flash the china firmware on it, which I did. After flashing the firmware on it, i installed twrp and wiped everything, data + cache + Dalvik Cache + System, then I flashed the EU firmware on it. After successfully flashing it I flashed magisk and some modules on it, and the phone worked GREAT! Then one day while using it the phone just shut down just like that and never booted back up. It stayed on the boot screen and did nothing!
So I tried reflashing the Chinese firmware with miflash, but this time I Accidentally RELOCKED bootloader, but when I first purchased the phone, the bootloader was already UNLOCKED. Miflash successfully flashed the chinese firmware v10.3.8.0 and the phone booted. I was RELIEVED! But after using it for a while, the phone started freezing! And their was a problem with the front camera! Somehow my front camera won't open properly, it kept saying "Can't open front camera, please calibrate".
And when I press Calibrate, popup cam goes up and down 3 times in a row and says "Can't calibrate".
So I went and request to unlock the bootloader and waited 168 hours, and in that 168 hours I left the phone untouched because it kept crashing and never boot back up unless if I go into recovery and wipe data. So I left the phone untouched for a whole week! Yesterday the waiting period came to an end and FINALLY I unlocked the bootloader! When I opened back up miflash I ACCIDENTALLY LOCKED BOOTLOADER AGAIN!!!! :’( Now Mi unlock is saying that I need to wait 30 DAYS TO UNLOCK BOOTLOADER BEFORE I CAN TRY TO FIX MY PHONE AGAIN! Please help me. Is there any way to flash the firmware on a locked bootloader? i dont care which firmware it is, once my phone is working again.
Any assistance would be very much appreciated!
Only solution is to enter to edl mode by test point but its too risky or to get a mi account with edl authorization, wait till the end of 30 days and dont make the same error for 3 time.
bouyhy01 said:
Only solution is to enter to edl mode by test point but its too risky or to get a mi account with edl authorization, wait till the end of 30 days and dont make the same error for 3 time.
Click to expand...
Click to collapse
I forgot to mention, after using miflash the last time, i flashed the indian global firmware on it using Miflash. The phone wont boot up past the recovery mode. It says "This MIUI version can't be installed on this device" in red. Tried wiping data but same results.
You have to unlock the bootloader and it will work again
ashok9949 said:
You have to unlock the bootloader and it will work again
Click to expand...
Click to collapse
guess i'll have to wait a whole month then before i can use the phone. Thanks anyway
1.Go to fastboot. try flash latest chineese fastbootrom.
doesnt work?
Then you only have choice for EDL mode flash.
But edl mode requires authentification anyway which in most case you do not own..
we need something solid edl flash method.. this is common&biggest xiaomi problem
carpediemz said:
1.Go to fastboot. try flash latest chineese fastbootrom.
doesnt work?
Then you only have choice for EDL mode flash.
But edl mode requires authentification anyway which in most case you do not own..
we need something solid edl flash method.. this is common&biggest xiaomi problem
Click to expand...
Click to collapse
Here are the list of things i've tried thus far:
1- Tried flashing china fastboot rom 10.3.8.0 with Miflash. No luck.
2- Tried unlocking bootloader with Mi unlock. Have to wait the 30 day period.
3- Tried unlocking bootloader with fastboot commands. Didn't work.
4- Tried flashing LR twrp and unofficial twrp, No luck as well.
I've sent an Email to [email protected] couple hours ago. Waiting to hear from them.
As for edl mode, i've no idea what it is or how to even start. If someone can guide me as to what to do, i'll try it. Appreciate all the feedback and help from y'all
abdulmaalik1tt said:
I forgot to mention, after using miflash the last time, i flashed the indian global firmware on it using Miflash. The phone wont boot up past the recovery mode. It says "This MIUI version can't be installed on this device" in red. Tried wiping data but same results.
Click to expand...
Click to collapse
I dont know how you can flash indian rom with locked bootloader.
Now there is only one method for you, open the back cover of the fone, do test point method, flash china fastboot firmware and unlock again.
demonntl said:
I dont know how you can flash indian rom with locked bootloader.
Now there is only one method for you, open the back cover of the fone, do test point method, flash china fastboot firmware and unlock again.
Click to expand...
Click to collapse
That might be an option for me; however, i dont know where is the test point after i open the back of the phone. Any idea?
abdulmaalik1tt said:
I forgot to mention, after using miflash the last time, i flashed the indian global firmware on it using Miflash. The phone wont boot up past the recovery mode. It says "This MIUI version can't be installed on this device" in red. Tried wiping data but same results.
Click to expand...
Click to collapse
EDL mode will not work untill you have a EDL Authorized account
I had already tried and it was a bad idea to open the back cover just stick with unlocking bootloader
EDL test point will not work because xaiomi made because no body should buy Chinese Varient phone and flash global rom ,and I don't understand exactly why xaiomi did this with EDL and bootloader
Opened up the back of my phone, found the edl mode test point, miflash recognizes the device and begins flashing then i get this error "cannot receive hello packet"
ashok9949 said:
EDL mode will not work untill you have a EDL Authorized account
I had already tried and it was a bad idea to open the back cover just stick with unlocking bootloader
EDL test point will not work because xaiomi made because no body should buy Chinese Varient phone and flash global rom ,and I don't understand exactly why xaiomi did this with EDL and bootloader
Click to expand...
Click to collapse
Wow. All this for nothing :crying:
abdulmaalik1tt said:
Opened up the back of my phone, found the edl mode test point, miflash recognizes the device and begins flashing then i get this error "cannot receive hello packet"
Click to expand...
Click to collapse
Ok, when I flash my mi5, it is the same. You only need to reboot the device into edl and try to flash again.
IXTUS said:
Ok, when I flash my mi5, it is the same. You only need to reboot the device into edl and try to flash again.
Click to expand...
Click to collapse
Now it's saying my account is not authorized. The stress is real :crying:
hi i have some similar for mistake i relock bootloader and just boot in fastboot and dont boot up recovery and i wait too 30 days but i search google and just download older mi flash and whooalaaa bootloader unlocked again not waiting time just try that work for me
abdulmaalik1tt said:
Now it's saying my account is not authorized. The stress is real :crying:
Click to expand...
Click to collapse
i said to you,i had faced the same issue,only unlocking the bootloader will help you
or you can try chinese mi pc suite,with english translator but you have to flash chinese recovery rom,
but im not sure it will work ,in my case it didnt work because it had base rom of indian varient
actually chinese and indian k20 pro are not the same
for example indian k20 pro dont have NFC
but chinese varient have nfc
abdulmaalik1tt said:
Now it's saying my account is not authorized. The stress is real :crying:
Click to expand...
Click to collapse
Did you complete the flash ？and start the phone into miui? If there have some picture, it is best.
---------- Post added at 10:03 AM ---------- Previous post was at 09:42 AM ----------
I have some ideas but I have not verified them. You can try to replace the recovery.img in china firmware for twrp and then fastboot flash on edl mode。if it can be done， dnot star it just into twrp and formatted data.
I will test this method on my old mi5 a little later.
To fix the front camera problem you'll have to flash the persist.img file of the 10.3.8 into the persist partition. It worked for me several times.
I accidentaly lock my bootloader, too, but I was able to unlock it right away
Don't worry mate, I had the same issue.
See this thread:
https://forum.xda-developers.com/k20-pro/help/destroyed-error-fastboot-locked-t3946012
I got mine fixed, you just need someone with an authorised account to help you out.
You got this far! You are almost there! trust me.
Thanks guys. I messaged the guy. Let's see if this works
Hello guys, so, today i was trying to install miui 9 in my mi a2, then later going to update to miui 10. I was trying to install by flash mode (XiaoMiFlash) Everything was going fine, until my windows accidently turned off for updates (RIP). When my pc turned on, i was desperately opening miflash as fast that i could, but then when i try to install again it was saying "cannot recieve hello packet". I tried to restart it thinking that would fix it, but its just stuck in a MI logo with mi.com screen(Bootloop). I was trying to unplug usb cable and then putting again trying to fix it, clicking refresh to see if it appears, but it doesn't. Same with fastboot mode, doesn't get recognized. I really need help to fix it and sorry if i wrote something wrong, english is not my native language.
Same problem happened with me today. Any Solution?
Are you able to boot into fastboot?
Something similar happened to me once with the A2.
I somehow too managed to interrupt some update process and got stuck in the same scenario.
I could resolve it by getting one of these now superseded fastboot stock files with some installer scripts in them.
The scripts also wouldn't work, but I could install the firmware files one by one manually, following the script's content.
First off though, you could try to get into fastboot mode (as mentioned before), boot the official twrp img and flash the latest firmware zip file from here
Then you could go ahead and flash miui for the A2 like any other custom ROM (or did you just post in the wrong section and actually got an 6X? - seeing that you used miflash, it really seems like it..
Just in case here is the right thread for downloading miui for the A2: A2 miui port)
Yaroray said:
Are you able to boot into fastboot?
Click to expand...
Click to collapse
Hey, sorry for not awnsering for a long time. Yes, i can enter in fastboot, but the problem is that my MI A2 doesn't get recognized. (nothing happens if i try to flash it in fastboot mode).
i same that trouble, i can try to bootloader but when i connect usb to my pc it not recognized, i don't run anycommand from my PC,
I think if i change to second slot i will boot my phone, and i want to change slot without command "fastboot set active-slot "
So, I have Xiaomi MI 8. Problem is, that phone is without any ROM at the moment. I did flashing and by mistake locked the phone, when checked in MiFlash box, where says "flash and lock" or something similar. So my phone fastboot is locked now and I cant flash it, because I locked and in MiFlash shows error.
I can also use Miunlock, because debbuging is off, because I cant even turn it on. ADB is not working also without debbuging allowed. Any ideas what can I do? how to flash my OS?
I fixed it with test points
astraler6n said:
So, I have Xiaomi MI 8. Problem is, that phone is without any ROM at the moment. I did flashing and by mistake locked the phone, when checked in MiFlash box, where says "flash and lock" or something similar. So my phone fastboot is locked now and I cant flash it, because I locked and in MiFlash shows error.
I can also use Miunlock, because debbuging is off, because I cant even turn it on. ADB is not working also without debbuging allowed. Any ideas what can I do? how to flash my OS?
I fixed it with test points
Click to expand...
Click to collapse
Try with EDL mode...
For EDL mode I think you have to open it to access the test point ...
I wish you luck because I destroyed the screen of my mi A1 the second time I had to open it
laugeek57 said:
Try with EDL mode...
Click to expand...
Click to collapse
Yes, that's what I did and now is flashing, but takes hours.
astraler6n said:
Yes, that's what I did and now is flashing, but takes hours.
Click to expand...
Click to collapse
According to my recollection it only lasts about ten minutes ...
So, i got a second hand mi 5 last week. Seller told me that it had software issue and I thought I could fix it. Because it was really cheap.
The device was stuck on bootloop when I had it. But I was able to open mi recovery and fast boot menus. i tried many options to flash a stable stock rom. The most useful one was to flash via XiaomiTool v2. It says successfully flashed and reboots but stuck on bootloop every time. (Tried few times already).
the bootloader is locked and no mi accounts binded to the device. Computer detects the device successfully.
I tried adb commands as well, but since bootloader is locked i couldn't get any further to flash or wipe.
Any useful suggestions?
Can you still access to fastboot mode?
If so, you need fastboot oem unlock to unlock bootloader first, before anything else.