Database Develop

Please help unable to install any rom??

Hey sorry if this has been asked before i couldn't find it anywhere so there is some problem with my phone i don't know what is happening every time i use to install a new Rom it use to install perfectly without any fc's boot loop errors etc, but from past 2 days i don't know why any ROM i try to install (even the one which i use to work perfectly) will not install perfectly there will be fc's boot loop error wont pass the X when i switch on the phone. Please help its driving me crazy

Make sure your wiping old data in recovery.. and if flashed a new kernal or radio could also cause a problem too

ilostchild said:
Make sure your wiping old data in recovery.. and if flashed a new kernal or radio could also cause a problem too
Click to expand...
Click to collapse
yes i did Wipe data/factory reset ,Wipe cache,Wipe Dalvik-cache but just now i discovered that after doing this and still last installed rom has not been wiped its still there wtf what should i do and yes i did install 2.6.34.1_AVS-925mV_BFS_1113Mhz kernel how do i completely wipe everything???

Umm also do wipe sd partition, then do another wipe factory and cache-.. then do a repair sd then try to flash new rom.. this is what i usually do when i install new roms

still no luck i even did clear storage then wiped everything and i dont use app2sd(ext) i dontunderstand what to do i even tried with the clockworkmod's recovery still the same

sorry man, My only guess and idea is try to flash back to a normal kernal, then flash rom.. only thing i can come up with atm, or you can wait and see if some one that comes up with a better solution

where can i find norman kernel or any kernel which can fix this?

Need help bricked phone :(

i recently flashed the eXistenZ Ultra 2, and im sure i did everything fine, after flashing the rom in recovery and flashing suprsu and wifi fix, i powered off the phone, and powered on but sony logo has apeared until now , and welcoming`s sounding 999..times. i cant turn it off, or i should say i cant do anything.
please help,

After flashing ROM and the fixes you should flash the 12.1.A.0.266 Firmware with FlashTool!
If problem still persists:
http://xda-university.com/as-a-user/how-to-recover-from-a-bootloop
Take a look at this site A recovery would be quite useful, but I think the kernel of eXistenZ ROM has one. If not, you'll find one in the development section. Otherwise, use the ADB as solution.
Good luck

Thanx for the post!
I used force shut down and then flash the 254 rom, and did all those things, and the problem occured again.
does the recovery software have to be the touch recovery? I use CWM v6 that enables with volume +.
and i use SuperSU fix.zip rather than superUser.zip and generally i flash rom, supersu fix.zip and wifi fix.zip. i flashed those three, before first booting, do i have to boot first before flashing wifi fix.zip?

eefathi said:
Thanx for the post!
I used force shut down and then flash the 254 rom, and did all those things, and the problem occured again.
does the recovery software have to be the touch recovery? I use CWM v6 that enables with volume +.
and i use SuperSU fix.zip rather than superUser.zip and generally i flash rom, supersu fix.zip and wifi fix.zip. i flashed those three, before first booting, do i have to boot first before flashing wifi fix.zip?
Click to expand...
Click to collapse
I think you need to flash 12.1.A.0.266 instead of 12.0.A.2.254 after flashing ROM. You could also wipe data, cache and dalvik cache, reflash eXistenZ ROM and SuperSU fix (or SuperUser but SuperSU should be ok), shut down the phone with the option in recovery and then flash the 12.1.A.0.266 with FlashTool.
It doesn't matter which recovery you take. Use the one you like best. I'm not quite sure, but to go sure, please flash the wifi fiz.zip after first boot up!

Schokonuss said:
I think you need to flash 12.1.A.0.266 instead of 12.0.A.2.254 after flashing ROM. You could also wipe data, cache and dalvik cache, reflash eXistenZ ROM and SuperSU fix (or SuperUser but SuperSU should be ok), shut down the phone with the option in recovery and then flash the 12.1.A.0.266 with FlashTool.
It doesn't matter which recovery you take. Use the one you like best. I'm not quite sure, but to go sure, please flash the wifi fiz.zip after first boot up!
Click to expand...
Click to collapse
thanx again,
i flashed the 266 kernel before the first boot, and the rom runs correctly,
but ive got some new problems:
1. performance, when i click on performance, it closes unexpectedly and says it has stopped.
2. i used go backup for backing up from data in 4.1, but in this rom i restored my apps,the apps installed correctly but goBackup says the data restoring successfully finished , but the data didnt restored, by the way at the time i backed up from my apps&data, i swapped memories with that linux code that this forum did.

eefathi said:
thanx again,
i flashed the 266 kernel before the first boot, and the rom runs correctly,
but ive got some new problems:
1. performance, when i click on performance, it closes unexpectedly and says it has stopped.
2. i used go backup for backing up from data in 4.1, but in this rom i restored my apps,the apps installed correctly but goBackup says the data restoring successfully finished , but the data didnt restored, by the way at the time i backed up from my apps&data, i swapped memories with that linux code that this forum did.
Click to expand...
Click to collapse
You're welcome
1. Do you have SuperSU installed? On AOKP ROM I'm running it asked for superuser permission for ROM Control (the control center implemented in the settings of the ROM). Maybe it'll ask you if SuperSU is installed. Otherwise, because it is after the first boot it needs to rebuild cache and so on.. If problem persists after reboot, just use an other clock speed controler (No-frills CPU, SetCPU..)
2. If you did that at the same time, maybe Go Backup didn't really backup your data. Try again, if it doesn't work and if you have a nandroid backup (backup from recovery) you can go into recovery, then to advanced restore and restore data. Otherwise your data is unfortunately gone I think :/
PS: I prefer Titanium Backup

HTC One M7 root access lost?

Hi I recently updated my phone to the newest version of ViperROM.
Ever since I did the update (full wipe), when I go into recovery it mentions this:
Root Access Possibly Lost Fix?
THIS CANNOT BE UNDONE
1. YES fix root (/system/xbin/su)
2. NO do not fix
I didn't have this before I updated my phone, and I'm pretty sure I haven't updated the CWM recently either... I also have SuperSU installed for root access.
I've reinstalled the ViperRom 2-3 times with the same issue, my work colleague is getting the same thing on his phone to (same phones). Both phones have the same recovery, supersu and rom.
Very wierd, anyone else seen anything like this or know how I might fix it?
I've used the option to add SuperSU to system, but the message still shows.
I can't seem to do anything while I have this message. There is an OTA update from ViperROM which I can't install, because is keeps asking to fix root.
Any help would be greatly appreciated.
Andy

killerb4dger said:
Hi I recently updated my phone to the newest version of ViperROM.
Ever since I did the update (full wipe), when I go into recovery it mentions this:
Root Access Possibly Lost Fix?
THIS CANNOT BE UNDONE
1. YES fix root (/system/xbin/su)
2. NO do not fix
I didn't have this before I updated my phone, and I'm pretty sure I haven't updated the CWM recently either... I also have SuperSU installed for root access.
I've reinstalled the ViperRom 2-3 times with the same issue, my work colleague is getting the same thing on his phone to (same phones). Both phones have the same recovery, supersu and rom.
Very wierd, anyone else seen anything like this or know how I might fix it?
I've used the option to add SuperSU to system, but the message still shows.
I can't seem to do anything while I have this message. There is an OTA update from ViperROM which I can't install, because is keeps asking to fix root.
Any help would be greatly appreciated.
Andy
Click to expand...
Click to collapse
Can you gain root access on the phone? E.g. terminal emulator and use the 'su' command. Do you get a SU prompt?
If not have you tried manually flashing SU zip?

CYNiCAL2KX said:
Can you gain root access on the phone? E.g. terminal emulator and use the 'su' command. Do you get a SU prompt?
If not have you tried manually flashing SU zip?
Click to expand...
Click to collapse
Its got to the point where I'm attempting to install a different SU.zip, and now CWM attempts to install then the screen goes blank.
I can't install anything via CWM at the moment...
I've had root access before installed the Viper 5.0 update, now is gone all weird.
I now can't install any .zip file via the phone, CWM attempts it showing "installing zip" then the screen goes blank and reboots.

killerb4dger said:
Its got to the point where I'm attempting to install a different SU.zip, and now CWM attempts to install then the screen goes blank.
I can't install anything via CWM at the moment...
I've had root access before installed the Viper 5.0 update, now is gone all weird.
Click to expand...
Click to collapse
Have you done Backup Data, wipe and fresh install, then restore Data?

CYNiCAL2KX said:
Have you done Backup Data, wipe and fresh install, then restore Data?
Click to expand...
Click to collapse
I have a backup from before i updated ViperRom 5.0, can I not install TWRP or something? Its just I would then need to reinstall ViperRom again and set everything up.
To be honest, it wasn't perfect from when I did the update, but it still looks better than the old version I was on.

killerb4dger said:
I have a backup from before i updated ViperRom 5.0, can I not install TWRP or something? Its just I would then need to reinstall ViperRom again and set everything up.
To be honest, it wasn't perfect from when I did the update, but it still looks better than the old version I was on.
Click to expand...
Click to collapse
If you back up data you won't need to set it up again. That's my point. Do this
Install TWRP, do a full backup, then wipe and install 5.5 fresh. Then restore Data. Restoring data will return your phone back to the way you had it.

CYNiCAL2KX said:
If you back up data you won't need to set it up again. That's my point. Do this
Install TWRP, do a full backup, then wipe and install 5.5 fresh. Then restore Data. Restoring data will return your phone back to the way you had it.
Click to expand...
Click to collapse
Oh I see, thanks

TWRP recovery loop

So the case was I reset my device, and later after i flashed a ROM into my device, it does not boot. Instead, it goes into TWRP recovery. And it goes to TWRP every time i boot my device.
I have done this for so many times and I cannot even know what is going wrong this time. I am quite frustrated and I did googled a lot but it did not solve my problem. So, I want to know if anyone else encounter similar problem and solution towards it.
I tried:
1. Wipe the dalvik cache.
2. Remove the battery for half an hour
3. Reflash the twrp
Any efforts and reply is much appreciated.
Thank you.

Mine's exactly the same, I factory reset so I could pass the phone on; and now it will not install custom roms, I've tried about 7 or 8, and it will only boot into twrp 3.0.2-5. Soft brick, but I'm unable to find any solution.
Here's hoping someone will come and help.
I think I'll have to reinstall twrp by connecting the phone to the computer, but I've no idea how to do this.
slifer225 said:
So the case was I reset my device, and later after i flashed a ROM into my device, it does not boot. Instead, it goes into TWRP recovery. And it goes to TWRP every time i boot my device.
I have done this for so many times and I cannot even know what is going wrong this time. I am quite frustrated and I did googled a lot but it did not solve my problem. So, I want to know if anyone else encounter similar problem and solution towards it.
I tried:
1. Wipe the dalvik cache.
2. Remove the battery for half an hour
3. Reflash the twrp
Any efforts and reply is much appreciated.
Thank you.
Click to expand...
Click to collapse

Exactly the same issue here too, installed lineage 14.1, was working great, I was selling to a friend, did a factory reset, now stuck at twrp, roms install etc, but after a reset, every time straight back to TWRP.
Looks like I might need to flash back to stock somehow.
But I did find this, but not yet tried.
https://www.reddit.com/r/LineageOS/comments/5riech/how_fix_twrp_recovery_boot_loop_after_lineageos/

andydgg said:
Mine's exactly the same, I factory reset so I could pass the phone on; and now it will not install custom roms, I've tried about 7 or 8, and it will only boot into twrp 3.0.2-5. Soft brick, but I'm unable to find any solution.
Here's hoping someone will come and help.
I think I'll have to reinstall twrp by connecting the phone to the computer, but I've no idea how to do this.
Click to expand...
Click to collapse
Well i have took the ultimate solution. Back to stock firmware fix everything. Well, i guess not much to mention on stock firmware=)
I think you should do the same thing too. Good luck.

slifer225 said:
Well i have took the ultimate solution. Back to stock firmware fix everything. Well, i guess not much to mention on stock firmware=)
I think you should do the same thing too. Good luck.
Click to expand...
Click to collapse
That is good to know, I shall attempt to do the same, did you later install a custom rom and everything was fine afterwards?

Yes, i flashed custom recovery and ROM afterward. Even several attempt on wipe and flash the new ROM. So i guess it should be fixed
Thank you.

andydgg said:
Mine's exactly the same, I factory reset so I could pass the phone on; and now it will not install custom roms, I've tried about 7 or 8, and it will only boot into twrp 3.0.2-5. Soft brick, but I'm unable to find any solution.
Here's hoping someone will come and help.
I think I'll have to reinstall twrp by connecting the phone to the computer, but I've no idea how to do this.
Click to expand...
Click to collapse
As slifer225 mentioned you can downgrade to stock firmware by installing the stock MM rom s433 version using spftools.
Download and Install stock MM rom using spftools.
Here is the link- https://cloud.mail.ru/public/Cco5/JYk3ytrW1
For further info follow this post- https://forum.xda-developers.com/k3-...3#post71749243
Follow this step by step guide to go back to unrooted stock rom. If you want to root after that then try installing custom recovery(twrp) again using spftools and flash supersu.zip using recovery. Do take a backup though before rooting your device.
---------- Post added at 10:11 AM ---------- Previous post was at 10:04 AM ----------
justwondering said:
That is good to know, I shall attempt to do the same, did you later install a custom rom and everything was fine afterwards?
Click to expand...
Click to collapse
Everything is working perfectly as I myself had gone through the same issue and did everything to fix the problem until I downgraded back to stock. Did root on my device again and installed lineage 7.1.1 and it works like a charm. One thing I love about this rom is the efficient ram management, lag free but battery management is not upto the mark but I guess we can work it out.
Whatever you do never forget taking a backup of functional rom.

Yes, I can confirm the solution worked for me, I left it with stock rom for my friend, I tried lineage 14.1 and did a factory reset, but ended once again with softbrick , lineage will install and work perfectly, but as soon as you do a factory reset, soft brick

Now I've hard bricked it. I loaded up a 'looprecovery' when it rebooted there's nothing, no charge light no vibrations PC doesn't see it, land fill?

Wondering...
justwondering said:
Exactly the same issue here too, installed lineage 14.1, was working great, I was selling to a friend, did a factory reset, now stuck at twrp, roms install etc, but after a reset, every time straight back to TWRP.
Looks like I might need to flash back to stock somehow.
But I did find this, but not yet tried.
https://www.reddit.com/r/LineageOS/comments/5riech/how_fix_twrp_recovery_boot_loop_after_lineageos/
Click to expand...
Click to collapse
I think that solution only works on Snapdragons. It didn't for me. Is there a solution for MTK devices?

the solution for this(FIX)
all we need to do is reinstall a stock recovery and the again reinstall the TWRP
https://forum.xda-developers.com/k3-note/general/ufficial-thread-lenovo-k3-note-t3102997
follow this link..my phone just got fixed

My phone TWRP-looped many times. The solution is actually easy.
1. Reflash using SPFlashtool ONLY the stock recovery
2. boot into stock recovery
3. choose english > press reboot phone
4. phone will reboot into rom without problemos
5. reflash TWRP
cheers
or
1. Copy stock recovery.img into sdcard
2. In twrp, select Install and navigate to where you put stock recovery.img
3. Press install image. Then, Select recovery.img. Slide to install
4. boot into stock recovery
5. choose english > press reboot phone
6. phone will reboot into rom without problemos
7. reflash TWRP
DONE

Infinity loop recovery
andydgg said:
Now I've hard bricked it. I loaded up a 'looprecovery' when it rebooted there's nothing, no charge light no vibrations PC doesn't see it, land fill?
Click to expand...
Click to collapse
hI MY FRIEND , you have been able to fix your K3 note, I have the same problem, I made twrp flash and went into infinite loop. Can you help? thank you

I smashed it and put it in the bin. I think once you can't get a charge light after tyring for a couple of week, it's dead.

Not working for Lenovo K3 Note.
My K3 note stuck in the twrp recovery after factory reset from the RR. I tried this solution but it didn't work.
Please help.

Help needed - Samsung J5-sm10fn (touchwiz) stuck booting into TWRP recovery

So I tried installing Xposed Framework by flashing it's ROM, but after I did it, I rebooted my phone, but every time I do it, it always boots into TWRP recovery. I tried fixing it by looking in the setting and I used a backup I made before doing all this crap and I restored, but my phone still boots only into TWRP recovery mode. I would really appreciate it if anyone could help me. Thanks.
PS. My phone is rooted and it has TWRP

TribalPaint said:
So I tried installing Xposed Framework by flashing it's ROM, but after I did it, I rebooted my phone, but every time I do it, it always boots into TWRP recovery. I tried fixing it by looking in the setting and I used a backup I made before doing all this crap and I restored, but my phone still boots only into TWRP recovery mode. I would really appreciate it if anyone could help me. Thanks.
PS. My phone is rooted and it has TWRP
Click to expand...
Click to collapse
Is it possible that you used the wrong Xposed for your device or SDK version? I can't imagine that restoring a backup didn't fix it. Did you try wiping system in TWRP first?
Things you can try:
- Flash the "Xposed Uninstaller" zip file in TWRP, which should always be on your device when you are flashing new versions of Xposed.
- Reflash TWRP in Odin. This should fix a recovery loop.
- Wipe system, data, dalvik, cache in TWRP, then try restoring your backup.
- As a last resort, you can download the latest stock firmware for your device from the sammobile site, flash it in Odin, let it boot once, reflash TWRP, wipe in TWRP and restore your backup (if you were running a custom rom you liked or something), then flash the correct Xposed for your device & android version.
Hope this helps!
Sent from my SM-N920T using Tapatalk

bogarty said:
Is it possible that you used the wrong Xposed for your device or SDK version? I can't imagine that restoring a backup didn't fix it. Did you try wiping system in TWRP first?
Things you can try:
- Flash the "Xposed Uninstaller" zip file in TWRP, which should always be on your device when you are flashing new versions of Xposed.
- Reflash TWRP in Odin. This should fix a recovery loop.
- Wipe system, data, dalvik, cache in TWRP, then try restoring your backup.
- As a last resort, you can download the latest stock firmware for your device from the sammobile site, flash it in Odin, let it boot once, reflash TWRP, wipe in TWRP and restore your backup (if you were running a custom rom you liked or something), then flash the correct Xposed for your device & android version.
Hope this helps!
Sent from my SM-N920T using Tapatalk
Click to expand...
Click to collapse
Hello. I already tried zipping the uninstaller for xposed but it did nothing, I also tried wiping dalvik cache and all, but no luck. I also think that my backups are just not functional. Now I'm left to just reflashing TWRP and if that doesn't work I'll have to flash the original stock firmware for my phone. I have spent already 2 days with constant searching for ways to fix my phone and not being able to do other things because this has been taking up my time and my patience, so I really appreciate every bit of fixing my phone that I get. Since I am new to all this I would be very grateful if you could send me the links to the correct files for my device and also give me a tutorial on what to do. As I appreciate any support, so I'm thankful for you helping me But until then my device is still not able to boot regulary but rather boots to TWRP

TribalPaint said:
Hello. I already tried zipping the uninstaller for xposed but it did nothing, I also tried wiping dalvik cache and all, but no luck. I also think that my backups are just not functional. Now I'm left to just reflashing TWRP and if that doesn't work I'll have to flash the original stock firmware for my phone. I have spent already 2 days with constant searching for ways to fix my phone and not being able to do other things because this has been taking up my time and my patience, so I really appreciate every bit of fixing my phone that I get. Since I am new to all this I would be very grateful if you could send me the links to the correct files for my device and also give me a tutorial on what to do. As I appreciate any support, so I'm thankful for you helping me But until then my device is still not able to boot regulary but rather boots to TWRP
Click to expand...
Click to collapse
Also, if I try to reflash TWRP, do I have to reflash the original firmware first, or I can just go straight ahead and just reflash TWRP?

TribalPaint said:
Also, if I try to reflash TWRP, do I have to reflash the original firmware first, or I can just go straight ahead and just reflash TWRP?
Click to expand...
Click to collapse
Update:
I fixed my phone, and here's what I did, so if anyone is new here with the same issue I had, I hope this can help you. So first of all as I said I kept booting to TWRP, later I tried reflashing TWRP, but I remembered that I missed something in ODIN, so I just pulled the cord and my screen after rebooting just said something along the lines of "An unexpected error occurred while updating software, please recover using Samsung Smart Switch." after that, I tried Samsung Smart Switch, but it was no luck for me, so then I used the last resort. I went on sammobile.com, I searched stock firmware for the exact model I had and then I checked the stock firmware that was available. Since I'm from Latvia, I picked the Baltic region, then I downloaded the latest stock firmware. After a long time, I downloaded the file, and I checked the instructions on how to flash it, I flashed the stock firmware, and then my problem was fixed, my phone was working again and now I have Android 7.1.1 as I used to have Android 6.0.1 and I had ZERO file loss However as you flash the stock firmware, TWRP get "flashed" out and same with root if you have it, and in that case if you want TWRP and root again, I highly suggest Meziani's YoutTube channel, because he gives simple and working tutorials on how to do it I'm glad if this helped anyone.