Hi, This is My Second Thread, this time i came with a bang...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <disclaimer.h>
/* READ CAREFULLY BEFORE PROCEEDING
*
*I am Not Responsible For Any Damages Caused To Your Phone By Using This Kernel,
*Although I have used this kernel for more than 2-3 Months ,
*But Overclocking is known to end up dead devices, fried CPUs and Burnt Motherboards...
*/
Kernel Features :
1. Overclock - BIG - 2.38 GHz little - 1.71 GHz
2. AdrenoBoost - For Hardcore Gamers
3.PowerSuspend - Driver For Better Battery Backup
4.Voltage Control - CAUTION : THIS FEATURE IS NOT FOR NOOBS, IF YOU ARE A NOOB LIKE ME STEP BACK WITHOUT THINKING
5.Franco Sound Control
6.Adreno Idler
7.Many TCP/IP algorithms for Faster Network Speeds...
8.Many I/O Schedulers...
9. Savoca KCAL Control
10. And Much More - P.S iam lazy to type :laugh:
Thanks to @MEGAX91 for goodix patches
GOODIX Patch for Nougat - Click Here
GOODIX Patch for MIUI Marshmallow - Click Here
Downloads :
Click Here [FPC + GOODIX] :laugh: :laugh: :laugh:
NOTE : GOODIX BUILD IS HIGHLY EXPIREMENTAL AND MIGHT BREAK SOME THINGS, IAM NOT SURE IF FP WILL WORK (USERS MIGHT ALSO HAVE TO FLASH GOODIX PATCH FOR NOUGAT)[/COLOR]
Changelog :
(P.S if you see older dates or older changelog in the installer please dont worry, iam lazy to update it )
Version 8.0
- Rebase to Latest CAF/3.10.84 (Reason - Linux Upstreams are Useless, earlier my kernel was based on Lineage 14.1 Kernel, but now its based on Pure CAF-3.10.84, and now kernel is Smooth as Butter and doesnt contains any Mi Max ****s...)
- Unified Build For all ROMS and FP SENSORS
- Fix WIFI-Hotspot in some ROMS
- Tweaks for Better Battery
- Compiled Using Latest Linaro 6.3.1 GNU-GCC
- Picked Some EAS Commits from Linaro EAS Backport git repository (thx to sur @neonkat)
Version 7.0
- Removed Overclock Totally - Useless (But instead unlocked max possible kenzo freqs 1843MHz & 1478MHz and 621MHz GPU)
- GPU Improvements + UI Improvements + Battery Tweaks (Even Without [useless] OC you wont feel any difference)
- Compiled With Stock 4.9 GCC Toolchain
- Merged With Latest CAF Branch (LA.BR.1.3.6_rb1.14)
- Updated Wlan Driver to caf/LA.BR.1.3.6_rb1.14
Version 6.0
- Upstreamed Kernel to 3.10.105
- Merged Latest CAF Branch (LA.BR.1.3.6_rb1.13)
-New CPU Governors Ironactive, Cafactive, Darkness, Impulse, BluActive, SmartAss2, BioShock
-Added State Notifier
-Fixed qpnp-smbcharger Derps, Now it will Support Fast charge Upto 2.4A but it is is 2A By Default.
Version 5.0
- Initial Goodix Build (Highly Expirimental)
- Fixed Compatiblity with More ROMS (Try on Nitrogen OS and tell me if it works)
- Added Option to Install Scream™ Manager App While Installing Kernel...
Version 4.0
- New Material Theme For Materialistic Persons (Like me :cyclops
- Added Qnovo Adaptive Charging (the one found only on Sony Xperia X, said to boost battery backup)
- Switched To Older UBER 6.3 GCC (Might Fix Bootloop Issues on Some Devices)
- Huge UI Improvements
- Switched to Franco Sound Control (Can now be controlled with any kernel management app)
- Tweaks For Better Battery
- And Much More Surprises, (Check My Github Page)
Version 3.0
-Sound Control - Fixed Soundcontrol but works only with EX kernel Manager !
-More Aggressive Hotplug
-Fixed PowerSuspend Not Letting Autosleep The Screen
-Added Maple I/O scheduler
Version 2.0
-Compiled with latest GCC7 (Sabermod 7.0)
- Experimental Dual OS Support (Option to select in Installer)
- Hotplug is Back (Option To Turn on/off)
- Initial Nougat Build
- and Many more to explore
Version 1.0
- Initial Release
CONTRIBUTORS :
@KabirKalsi(me) - For Making this kernel From Scratch
@Umang96 - For his Awesome Radon Kernel and Build Tools
@rishabhao - My Bro - His Awesome Aroma Installer Rocks
@MOVZX - For Helping me with overclock
@psndna88 - For His Awesome Agni Kernel
@GuneetAtwal - His Blaze Kernel is a Bang
@tejus - For teaching me how to post on xda
@MEGAX91 - For Some of the commits
@neonkat - meh, picked many commits from his kernel
@abhishek987 - For Dominator kernel
NOTE : THIS IS VERY EARLY STAGE OF THE KERNEL MANY THINGS MIGHT BE BUGGY... LEMME KNOW IF THERE ARE ANY BUGS...
BUY ME A CUP OF COFFEE IF YOU LIKED MY WORK
Paytm
Source :
Github : [url]https://github.com/thescream/kenzo-kernel/commits/LA.BR.1.3.6_rb1.14[/URL]
Nice, will check your kernel ASA I can
UPDATE : I NEED TESTERS FOR GOODIX VERSION ELSE IT WILL BE ABANDONED, ITS BIT HARD FOR ME TO MANAGE TWO SEPRATE BRANCHES! PLEASE I REPEAT I NEED GOODIX TESTERS, THOSE WHO CAN REPORT ME IF ITS WORKING FINE! IN PM OR ON TELEGRAM @KabirKalsi2k
Hey, others OC kernel was not efficient (0 gain in performance ), this OC really improve performance ?
BlackDragonz said:
Nice, will check is ASA I can
Click to expand...
Click to collapse
OMG! i was still editing and forgot to reserve thread! you are veryyyyy fast! faster than the kernel i guess!
:silly:
jordandroid64 said:
Hey, others OC kernel was not efficient (0 gain in performance ), this OC really improve performance ?
Click to expand...
Click to collapse
Iam Not Joking IT REALLY DOES INCREASE PERFORMANCE... I play GTA : SA ON MAX SETTINGS WITHOUT ANY LAG AT ALL...
I speak about MOVZX kernel by example which was not a joke too but the theorical frequence changed nothing at performance... I will try it next time I will be on MIUI
jordandroid64 said:
I speak about MOVZX kernel by example which was not a joke too but the theorical frequence changed nothing at performance... I will try it next time I will be on MIUI
Click to expand...
Click to collapse
yeah! trying wont hurt! iam not that much experienced but your opinions matter the most!
Is there any chance to work on nougat ?
thx
AgentBuBu said:
Is there any chance to work on nougat ?
Click to expand...
Click to collapse
i wont make nougat kernel until nougat gets fully bugless, i mean no camera fc
DarkHero140 said:
governors? schedulers??
Click to expand...
Click to collapse
i recommend to not to mess with governors! interactive is best so far! all others doesnt seem to perform as they claim
@KabirKalsi
Stock kernel return error. Do not find a wifi network. Your low CPU is high (883MHz). The charge is like drinking water. How about you make a 200mhz li kernel?
Redmi Note 3 cihazımdan Tapatalk kullanılarak gönderildi
Lte speed too low.
The minimum processor speed must be 200 or 400.
Automatic screen color adjustment must be added.
@KabirKalsi
nice to see new kernel dev on RN3 Pro community
1- the voltage control you are uisng don't work!( i fixed it on my OP3T , but not on my Kate )
2-those CPU O.C frequencies are useless , because bus frequencies remain same.( even O.V won't help )
*newer Qualcomm chips won't overclock ( like old times with SD80x series ) as Qualcomm has locked the chips. only thing we can do is unlock the frequencies which are there ( B Cluster 1840MHz & 1958MHz / L Cluster 1440MHz )*
freeforce said:
Lte speed too low.
The minimum processor speed must be 200 or 400.
Automatic screen color adjustment must be added.
Click to expand...
Click to collapse
400mhz and 883mhz takes same amount of power. so it is good to set 883 mhz as minimum
We want to see a kernel with a CPU of 200 MHz.
Redmi Note 3 cihazımdan Tapatalk kullanılarak gönderildi
It seems to work on nougat, but there isnt so much difference when comes to real performance, i mean benchmarks show the same 81k antutu with 20k gpu and 1100SC +3100MC Geekbench 4.. despite both aida and cpuz show the cpu frequencies as you mentioned, 2.38 and 1.71
smustafasms said:
400mhz and 883mhz takes same amount of power. so it is good to set 883 mhz as minimum
Click to expand...
Click to collapse
I don't think so. On my test it's ~12h SoT to 12,5-13h SoT.
alreadyregistered said:
I don't think so. On my test it's ~12h SoT to 12,5-13h SoT.
Click to expand...
Click to collapse
Lol, half of an hour, what a difference. But higher clocks reduses lags.
Related
Hey guys
Even if this wasn't the way i planned to release my stuff, i'm gonna do it anyways now...
I usually planned not to release my kernel seperately from my rom, but my lappy just crashed hard this afternoon when i was about to push my sources to github... so everything's gone except for the kernel, i pushed it on saturday... luckily
Now, back to topic
The FEATURES:
Compiled with Linaro toolchain
Based on the CM 10.1 kernel
[*]Rock stable
[*]Overclocked CPU to max 1.7GHz
[*]Unlinked GPU from CPU
[*]Overclocked GPU to max 600MHz (Please see 2nd post for instructions)
[*]Overclocked LP to 600MHz by default, up to 700MHz by user
[*]Cpuquiet framework enabled (with balanced as default gov)
CPU boost on wakeup
Added UV interfaces for CPU, GPU, LP and EMC
Added LP max clock interface
Added arararagi's hardware customizations
Added dynamic FSYNC toggle
Added changes from NVIDIA
Added Smartmax Governor
Added GAMING Governor
Added smartassV2 Governor
Added HYPER Governor
Added wheatley Governor
Added Deadline I/O scheduler
Set Deadline as default
Added ROW I/O scheduler
Added cfq I/O scheduler
Added SIO I/O scheduler
Added fast charging
KSM enabled by default
Raised the temperature throttle to 80°C (Tegra 3 default is 85°C, LGs default is 71°C)
Disabled Baseband wakelock
A lot of tweaks
The REQUIREMENTS
A unlocked bootloader
A working adb/fastboot runtime
A brain with the ability to read
The will to recycle your warranty papers
The INSTRUCTIONS
Download the latest kernel version from HERE
The easy and fast way:
Copy the zip to your sdcard
boot into recovery
flash the zip
reboot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
We have our own IRC channel now:
#WerewolfJB
if you feel like having a relaxed chat, or if you have a serious problem, feel free to join
The THANKS
@non4 for testing and giving ideas
@FunkyRasta for his testing
exFAT for his help and port for stock
eagleeyetom for all his help
doixanh for his help
the whole #GingerDX channel
Disclaimer: I can not be held responsible for any damage this kernel might have caused to your phone
The PLANS FOR THE NEXT RELEASE
Code:
[STRIKE]CPU OC[/STRIKE]
[STRIKE]Unlinking the GPU[/STRIKE]
[STRIKE]New I/O schedulers[/STRIKE]
[STRIKE]cpuquiet[/STRIKE]
S2W
More Tweaks
The SOURCES
can be found on my GitHub HERE, used branch is cm-10.1
Used defconfig
Used toolchain
Used scripts
Feel free to use them, that's what they're there for, but please make sure to give credits. It's not too much to ask, is it?
XDA:DevDB Information
WerewolfJB kernel v010 [12-24-2014] GPU/CPU/LP OC | UV | CPUQUIET, Kernel for the LG Optimus 4X HD
Contributors
laufersteppenwolf
Source Code: https://github.com/laufersteppenwolf/lge-kernel-p880
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 010
Stable Release Date: 2014-12-24
Created 2013-09-13
Last Updated 2015-05-25
Reserved
Changelog:
Code:
[B]12.24.2014[/B] Merry Christmas, everyone!
v010
- Fixed torch brightness
- Interactive gov finetuning
- Cpuquiet finetuning
- Lowered some default CPU voltages
- Updated baseband driver
- Some LMK updates
- Various network updates
- Allow 51MHz also when screen is on
- CPU scaling tweaks
- Boost CPU when turning on the screen (---> faster wakeup/screen on)
- Fixed network indicator arrows
- Updated netfilter
- (Allow reading the SBK)
[B]04.29.2014[/B] Biiiig update
v009
- Enabled WiFi Ad-Hoc
- Reverted the GPU unlink
- Volume gains
- CM upstream patches
- GPU driver updates
- General CPU and CPUQuiet tweaks
- Modified runnable_threads gov to use less cores at low freqs (--> better battery)
- Fixed booting into bootloader (reboot bootloader and reboot oem-unlock is the same now)
- Added support for OUYA Wireless Bluetooth Controller
- Fixed double-press-power from kernel-side
- Improved proximity sensor
- SmartDimmer enabled
- 5GHz WiFi support
- Various network changes
- Updated gaming gov
[B]09.08.2013[/B] bugfixes
v008b
- Fixed CPU throttles during games
- Fixed LP OC
- Improved camera performance
- Small cpuquiet tweaks
[B]09.01.2013[/B] huuuuge update
v008
- Finally fixed the baseband wakelocks correctly
- Updated many NVIDIA drivers
- Updated WIFI firmware
- Many I/O tweaks
- Fixed a cpuquiet value (should go faster in LP mode now)
- Improved hotplug
- Entropy tweaks
- Backported 3.4 lowmemkiller
- Reduced trasition latency
- HOX+ memory timings
- Added smartassV2 gov
- Added HYPER gov
- Added wheatley gov
- Some more minor stuff ;)
[B][07.16.2013][/B] even better performance and hardware customizability
v007
- Updated SIO, ROW and Deadline
- Added smartmax gov
- Added runnable threads couquiet gov
- Completely re-worked cpuquiet
- Set default max freq to 1.5GHz - everyone should be able to boot this kernel now
- Beaten skin throttle - no more useless performance throttling
- Added Ad-Hoc mode
- Added arararagi's hardware customizations - Thanks a lot man :)
* Control of Torch brightness
* Control of backlight
* Control of charging current
* Disabled baseband wakelocks
* Control of Vibrator strength
* Control of used backlight HVLEDs
* Control of Livecolors
[B][06.16.2013][/B] improved performance
v006
- Activated and tweaked cpuquiet
- Balanced as defaule cpuquiet governor
- Baseband wakelock is visible again
- Tweaked temperature throttles --> should be way better now
- Tweaked CPU in general
- Overclocked LP to 600MHz as default max freq, but overclockable up to 700MHz by user
- Most likely some more stuff i did, but i already forgot :D
[B][05.20.2013][/B] new features and fixes
v005
- Added CPU OC up to 1.7GHz on all four cores
- Increased the needed Voltage for 4x1.7GHz
- Added a dynamic FSYNC toggle
- Fixed the CPU UV inferface
- Added a EMC UV interface
- Added a GPU UV interface
- Added a LP UV interface
- Included the baseband wakelock "fix"
- Changed the lower frequencies again
- Added fast charging
- Fixed temperature reporting
[B][05-14-2013][/B] improved performance
v004
- Added CPU OC up to 1.7GHz single, 1.6GHz quad
- Added GPU OC up to 600MHz
- Added undervolt interface
- Added LP max clock interface
- Added GPU max clock interface
- Improved battery consumption
- New clock-speeds
- Reduced DDR3 min_rate to 25.5MHz (by NVIDIA)
- Some more tweaks
[B][05-08-2013][/B] baseband wakelock improvements + tweaks
v003
- Building with Linaro toolchain from now on
- Improved baseband wakelocks
- More tweaks
- Stuff I forgot :D
[B][05-03-2013][/B] big GPU improvements
v002
- Added some new I/O schedulers
- GPU now unlinked from within the kernel
- GPU overclocked to 520MHz
- Slightly improved multitasking
[B][04-29-2013][/B] initial release
Additional stuff:
GPU OC more than 520MHz:
For daily use, i set the max GPU rate to 520MHz. This should be enough.
But if you think, you need more heat to cook something for example, you can go up to 600MHz. Therefore you need to set a new max GPU clock limit. You do this using the following commands:
Code:
echo '<GPU_clock>' >/sys/devices/system/cpu/cpu0/cpufreq/gpu_oc
with <GPU_clock> being your new desired max clock rate
Setting LP max rate:
You have now the ability to set the max speed of the low power core (5th core). You can do this using the following command:
Code:
echo '<LP_clock>' >/sys/devices/system/cpu/cpu0/cpufreq/cpu_lp_max
with <LP_clock> being your new desired max clock rate
Changing the voltage table:
You have the ability to change the voltages for the processor from now on. But just because you can, doesn't mean you should. Changing voltages is dangerous! In the worst case, you can burn your processor!
I am not at all responsible for damage, caused my my kernel/your settings!
You can find the interfaces here:
Code:
/sys/devices/system/cpu/cpu0/cpufreq/UV_mV_table <--- CPU
/sys/devices/system/cpu/cpu0/cpufreq/avp_UV_mV_table <--- GPU
/sys/devices/system/cpu/cpu0/cpufreq/emc_UV_mV_table <--- RAM
/sys/devices/system/cpu/cpu0/cpufreq/lp_UV_mV_table <--- LP core
For using @arararagi's hardware customizations, i'd suggest you to use his toolbox from this thread
Stock builds of Werewolf JB
Hi all.
I'll be maintaining WerewolfJB kernel for stock. The links will be listed on this post. I may also upload experimental kernels.
All credits go to @laufersteppenwolf for his excellent kernel.
For now, the link for WerewolfJB v005 stock is this: https://www.box.com/s/okea8s7pdqcgf5soppbi
And for WerewolfJB v005 CM (with increased voltages and new modules for mobile data): https://www.box.com/s/4d3vxivlcu9ebsku6r4f
Flash it via CWM/TWRP.
Note: Both stock AND CM versions have increased voltage for the 1.7GHz step to 1300mV because of reported instability. Be careful in undervolting since the voltage table is slightly imbalanced, so perhaps -75mV can work for some frequencies but not for others. Furthermore, I removed quite a lot of wakelock references in baseband_xmm_power but forgot to revert them back to the "fix", so if you have any baseband instability please drop me a PM. Also please do report battery life performance, along with a screenshot of your wakelocks and ideally a dmesg. Thanks.
==============================
Experimental versions (for STOCK):
None for now.
Woohoo thanks!! Goodies for us
Sent from my LG-P880 using Tapatalk 2
roy8846 said:
Woohoo thanks!! Goodies for us
Sent from my LG-P880 using Tapatalk 2
Click to expand...
Click to collapse
I would have liked to release the ROM tonight, too.... but my lappy somehow didn't agree with me
Please test and report back. Also about gaming performance.
Is to flash the Kernel with Fastboot the only way ?
Our can I flash it with Terminal Emulator?
Sent from my LG-P880 using xda app-developers app
What about battery life?
On official CM when I use 3G Internet, battery drain is very, very fast.
_____________________
Swypnięte z LG Optimus 4X HD przy użyciu Tapatalk'a
Nemeziz 56th said:
Is to flash the Kernel with Fastboot the only way ?
Our can I flash it with Terminal Emulator?
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
you can use this method of course, too
sQuAshPL said:
What about battery life?
On official CM when I use 3G Internet, battery drain is very, very fast.
_____________________
Swypnięte z LG Optimus 4X HD przy użyciu Tapatalk'a
Click to expand...
Click to collapse
this kernel (together with my rom) lasts about 2 days with mobile data and wifi always enabled
laufersteppenwolf said:
you can use this method of course, too
this kernel (together with my rom) lasts about 2 days with mobile data and wifi always enabled
Click to expand...
Click to collapse
Those are awesome news when can we expect your rom to be officially released ???
JAsko_san said:
Those are awesome news when can we expect your rom to be officially released ???
Click to expand...
Click to collapse
as soon as i've set up my lappy again and re-made all my tweaks and changes
I thought GPU unlink was already implemented, or was this done through init.d? At least people have something other than kholks unstable alpha to play with
Sent from my rooted P880
@non4 said:
I thought GPU unlink was already implemented, or was this done through init.d? At least people have something other than kholks unstable alpha to play with
Sent from my rooted P880
Click to expand...
Click to collapse
yeah, i unlinked it via init.d in the test roms i wanted to implement it to the kernel, but... you know
are newest tegra drivers in?
elfen.lied said:
are newest tegra drivers in?
Click to expand...
Click to collapse
not yet, but i will inlude them
OP updated with terminal instructions
this is a great news, another custom kernel :beer:
but I'm still with zaiben rom (base on stock rom) cause for me cm 10.1 rom still not ready for my daily use. I hope you will build for stock rom too
surely I will try your kernel when I'm ready to move to cm official or when you release you rom
Sent from my tf101
This kernel seems good so far - feels smoother and more consistently buttery. I'll have a look for bugs - I don't know about the governors, though.
someth1ng said:
This kernel seems good so far - feels smoother and more consistently buttery. I'll have a look for bugs - I don't know about the governors, though.
Click to expand...
Click to collapse
For development sake can you verify if gesture typing works properly? Then we'll know if the kernel broke it or the test rom
Sent from my rooted P880
Nice. Thank you!!!
BTW, can anyone make a flashable zip? Don't have access to a PC. Mine is down.
Sent from my LG-P880 using Tapatalk 2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FOR DEVS AND USERS BEFORE FIGHT ME CLICK HERE!: https://forum.xda-developers.com/showpost.php?p=70362424&postcount=3
Code:
DISCLAIMER!!
I am not responsible in any way for anything that can be happen to your device when you flashing my kernels.You do so at your own risk!
Features
Anykernel:
- Anykernel2 zip for maximum compatibility with all ROMs, CrazySuperKernel uses your existing ramdisk (Do NOT flash this over other custom kernels!You should only flash CrazySuperKernel over the kernel that came with your ROM!!)
Kernel tweaker app:
- CrazySuperKernel Adiutor (need download it from downloads)
Toolchain:
DF 4.9 Toolchain [latest update]
CPU:
- governors:
crazyactive(my governor:balance governor for great battery life and performance based on interactive)
interactive
impulse
ondemand
smartmax
zzmoove
ondemandplus
pegasusq
nightmare
conservative
lionheart
powersave
userspace
yankactive
smartmax_eps
intellidemand
intelliactive
- MSM Limiter
- state notifier
IO schedulers:
bfq
tripndroid
cfq
noop
deadline
fiops
row
sio
zen
vr
fifo
TCP congestion controls:
cubic
bic
westwood
htcp
highspeed
hybla
reno
bic
hybla
vegas
lp
yeah
illinois
scalable
- tcp congestion changed to Westwood
GPU:
- governors:
msm-adreno-tz
simple_ondemand
powersave,performance
userspace
cpubw_hwmon
msm_cpufreq
- Adreno idler
- simple gpu algorithm
Thermal control:
- Intelli thermal v2
Hotplug:
- Disabled MP Decision hotplug
- Enabled Bricked Hotplug
- Prevent wakelock when ambiend display disabled(misc control tab)
Sound:
- Faux sound updated and fixed
- Slimbus overclock
More:
- Kernel runs with SELinux permissive by default
- init.d support
- insecure kernel (adb has root privileges)
- fast charge
- cpu voltage control
- pvs level info
- Kcal v2
- Frandom support
- Disabled Arch Power
- CRC Check Disabled
- Gentle Fair Sleepers (Disabled by default)
- Enabled All Suspend and Idle Modes
- Power Suspend Mode/State
- Dynamic filesystem read-ahead
- A lot improvments
- A lot fixes
Download Link CrazySuperKernel [AnyKernel]:https://www.androidfilehost.com/?w=files&flid=140902
Download Link CrazySuperKernelAdiutor[Updated]:https://www.androidfilehost.com/?w=files&flid=139961
Installation guide
Do NOT flash this over other custom kernels!
You should only flash CrazySuperKernel over the kernel that came with your ROM!!
- Download Kernel from this thread
- Flash it with Recovery
[Wipe cache and Dalvik cache recommended]
- Then Reboot
Enjoy the CrazySuperKernel !!!!
Credits
thx Showp1984
thx Faux123
thx Savoca
thx RenderBroken
thx Neobuddy
thx Myfluxi
thx FranciscoFranco
thx SultanXDA
thx osm0sis
thx ShinyShide
thx bhb27
thx Lord Boeffla
thx yank555
thx apb_axel
thx the devs where made the cm14 bootable and working
thx CrazyGamerGR yeh me
XDA:DevDB Information
CrazySuperKernel, Kernel for the OnePlus X
Contributors
CrazyGamerGR
Source Code: https://github.com/CrazyGamerGR/CrazySuperKernel-CM14.1-opx
Kernel Special Features: check the feature list
Version Information
Status: Stable
Created 2017-01-01
Last Updated 2017-01-01
FAQ
Recommended app : CrazySuperKernel Adiutor
changelogs
v1.0/01-01-17
- initial release
v2.0/02-01-17
- added fast charge
- added pvs info
- added cpu voltage control
If u use zzmove governor disable all the hotplugs coz it use its own hotplug as anyone knows.
[Q]How i select profile from kernel tweaker app?
[A]You need to go in governor tunable-profile number and select the number of the profile from the list.
Zzmove profiles
1 ) Default -> will set governor defaults
2 )ybat -> Yank Battery -> a very good battery/performance balanced setting - DEV-NOTE: highly recommended!
3 )ybatext-> Yank Battery Extreme -> like yank battery but focus on battery saving
4 )zzbat-> ZaneZam Battery -> a more 'harsh' setting strictly focused on battery saving - DEV-NOTE: might give some lags!
5 )zzbatp -> ZaneZam Battery Plus -> NEW! reworked faster battery setting - DEV-NOTE: recommended too!
6 )zzopt -> ZaneZam Optimized -> balanced setting with no focus in any direction - DEV-NOTE: relict from back in the days, even though some people still like it!
7 )zzmod -> ZaneZam Moderate -> NEW! setting based on 'zzopt' which has mainly (but not strictly only!) 2 cores online
8 )zzperf -> ZaneZam Performance -> all you can get from zzmoove in terms of performance but still has the fast - down scaling/hotplugging behaving
9 )zzinz-> ZaneZam InZane -> NEW! based on performance with new insane scaling active. a new experience!
10 )zzgame-> ZaneZam Gaming -> NEW! based on performance with scaling block enabled to avoid cpu overheating during gameplay
reserve1
reserve2
Many thanks. It didn't work for me on sultans ROM stuck on one plus screen.
cokesucker said:
Many thanks. It didn't work for me on sultans ROM stuck on one plus screen.
Click to expand...
Click to collapse
Try m8 if you want the v0.1 where i upload now,it should work
CrazyGamerGR said:
Try m8 if you want the v0.1 where i upload now,it should work
Click to expand...
Click to collapse
Sorry bro, i just realized it's for CM14 and I'm running sultans CM13 my mistake didn't read properly.
cokesucker said:
Sorry bro, i just realized it's for CM14 and I'm running sultans CM13 my mistake didn't read properly.
Click to expand...
Click to collapse
It should work with cm13 too coz cm14.1 got some improvments only
CrazyGamerGR said:
It should work with cm13 too coz cm14.1 got some improvments only
Click to expand...
Click to collapse
Cool, downloading 0.1 now, will report back. Thanx for quick response.
cokesucker said:
Cool, downloading 0.1 now, will report back. Thanx for quick response.
Click to expand...
Click to collapse
Np m8,thx for feedback
cokesucker said:
Many thanks. It didn't work for me on sultans ROM stuck on one plus screen.
Click to expand...
Click to collapse
Read sultan's thread carefully..you will find that sultan's cm doesn't support custom kernels..only Arsenic works with that kernel.but if you are using sultan's cm why you need another kernel..just flash cm 13 and flash this kernel or whatever you like.
Fap4k said:
Read sultan's thread carefully..you will find that sultan's cm doesn't support custom kernels..only Arsenic works with that kernel.but if you are using sultan's cm why you need another kernel..just flash cm 13 and flash this kernel or whatever you like.
Click to expand...
Click to collapse
Yeh sultan use his own tweaks inside and is better stay with stock but other kernels work coz i used sultan's rom on my oneplus3 with other kernel.
Fap4k said:
Read sultan's thread carefully..you will find that sultan's cm doesn't support custom kernels..only Arsenic works with that kernel.but if you are using sultan's cm why you need another kernel..just flash cm 13 and flash this kernel or whatever you like.
Click to expand...
Click to collapse
Well first of all this isn't Sultan ROM's thread, and there is nothing wrong with trying out new kernels if they are compatible.. the dev was kind enough to upload a version which works.
I'm on CM14.1 with Boeffla kernel. But it lags to much in my opinion. Animations, games all has some stutter. I can install a fresh cm14.1 with this kernel. But is this a lagfree experience for the OPX?
allard1992 said:
I'm on CM14.1 with Boeffla kernel. But it lags to much in my opinion. Animations, games all has some stutter. I can install a fresh cm14.1 with this kernel. But is this a lagfree experience for the OPX?
Click to expand...
Click to collapse
Need to test it m8 and check if you like the performance of it.
New update is up!
i trying to flash it on RR NOUGAT but stuck with 1+ logo
LolHacker17 said:
i trying to flash it on RR NOUGAT but stuck with 1+ logo
Click to expand...
Click to collapse
V2.0 or v1.0?
CrazyGamerGR said:
V2.0 or v1.0?
Click to expand...
Click to collapse
0.2
FENIX
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer:
use this kernel at your own risk. Flashing it may brick your device. I'm not responsible for any software/hardware and any kind of damages/losses.
I make this kernel for my own, and decided to share with community.
The goal of this kernel is to maintain stability over performance, and extend for what possible the battery backup. Enjoy.
What's in it:
Code:
-Gpu Underclock to 160mhz
-Gpu uv -50mv
-Lastest Caf Tag
-Lastest wlan drivers
-Kcal, display color full control
-Sound Control
-PowerEfficientWq
-F2fs
-Vibration Control
-Compiler Optimizations
-Battery Tweaks
-EAS
-Performance tweaks
-Refer to changelog or to git to all the tons of features
-Some other patches, check github
Flash in Twrp
Changelog-HMP-:
Code:
12/09/2019--LoveEdition--
- Android 10 ready
- Drg: Overclocked big cores too, like sdm660: 2.2ghz
- rebased again to new cleaned sources with latest nikki merges
- upstreamed to 4.4.191 + LA-UM-0074 wlan drivers, built inline
- Sultan's Ion, Iommu, ashman drivers, for improved performances
- Goodboi governor: an impulsed tweaked by me for battery
- kgsl: dispatch commands by using a master ktrhead: to reduce jitter by alot
- pl2: set gpu idle timeout to 64ms (like b2n\drg)
- ddrbus: changed governor to avoid 100% freq stuck
- allowed deeper idle cores\cluster
- source cleaned, keeped only the useful commits
- and alot, alot more. Check git.
13-07-2019-1644:
- rebased all to drg lastest sources to avoid any kind of source corruption
- camera drivers fully reverted to stock source to avoid any kind of problems (i will not touch nothing there in future)
- builded with gcc9 with alot of fixes
- upstreamed to 4.4.185 + LA.UM-0072 wlan drivers, builded inside the kernel
- we are module free
- sdm636 have now only little cpu freqs like sdm660: we cant afford 2.2ghz on 3000mah battery
- sdm630 fully supported
- nokia b2n fixed rotation bug
- cpu input boost
- disabled debugfs, tracing, loggings, debugs, i mean, not all of them but TONS OF THEM
- deleted most of unused drivers, like dvd players, cassette drivers (wtf nikki)
- disabled nikki usless drivers
- alot of workloads on power efficient workqueques
- vibration control (maybe not in b2n)
- sound control , with no metallic sound
- 160mhz initial gpu freq to save power + -50v undervolt for better power consumption
- sdFat driver, lastest version
- KCAL fixed, updated and optimized for sdm660 family processors
- zram lz4 compression for better perf
- disabled crc check
- blocked ipa and other wakeloks (but no boeffla wkl blocker for now)
- gpu will wake up only if there is a ioctl rather then a touch input, to save power
- reduced the max voltage allowed for the panel
- lowered cpu\gpu thermals to avoid device damage
- new fenix banner for recovery
- console framebuffer optimizations for 70% better perf
- 3 x faster integer than stock
- interactive optimizations
- idle lite changes
- don't need to flash magisk after flash
- and other tons of optimizations, but carefully cherry picked from the best devs around here
-refer to build date as build number
Changelog-EAS-:
Code:
-basically, all the feats of Fenix HMP
-EAS energy model by @nysadev (fantastic)
-some governors, blu_schedtuil, schedutil,
-dont let gcam and settings waste power on background
-removed some other logspams\debugs
-cpuidle lpm prediction tuning, for better idle battery saving
-removed dsboost\dynamicstune boost, to save power
-builded with Ofast
-alot of tasks uses interrutible w8s , for better idle
-100hz otpimizations
-backported PELT from 4.14 , for better power consumption/performance
-alot of sched patches
-alot of gpu performance improvements
-enabled ram ECC for faster reboots (this is awesome)
-aligned strcmp to 64kb cache line
-alot of cache optimizations by Sultan
- rewrited iommu/Ashman from sultan
- optimized for armv8
- increased kgsl priority: more smoothness
-boot speed optimizations
-cpu idle further optimizations
-PELT optimizations
- Foxed snapdragon 630 EAS bootloop
- updated my energy model for 630 by porting nysadev capacity based one for sdm660: this will give more battery and smoothness
- suppress debug verbose and disabled exp rcu like in sdm660
- removed the usless tz_log, that was spamming and yelling in the background (tx to bielfiboi to discover this)
- builded with gcc 9.1 -ofast
- very good battery backup, performance
DOWNLOAD-HMP-
DOWNLOAD-EAS-
ALWAYS wipe dalvik cache after flashing the kernel, or you will encounter bugs.
Enjoy,
feedback is appreciated.
Thanks to:
@madpausa, without him I would never have approached a linux distro
@hmd
@xda
and all the other authors of the hundreds of commits in github !
XDA: DevDB Information
Fenix kernel for NokiaDRG\B2N\PL2
Compiler: GCC-9.1
Branch: Android 9.0
Kernel Version: 4.4
defconfig: nokia_defconfig
Source Code:
FENIX
Thanks for your work but the links are all wrong...the place where the vbmeta files should be linked links to the kernel and the place where the kernel should be linked is broken.
Now my phone is in a bootloop and I dont have the vbmeta files.
the download link at the bottom, its not working
hazam1992 said:
Thanks for your work but the links are all wrong...the place where the vbmeta files should be linked links to the kernel and the place where the kernel should be linked is broken.
Now my phone is in a bootloop and I dont have the vbmeta files.
Click to expand...
Click to collapse
https://drive.google.com/file/d/1ifnXCIdkqKnk_a1HII9RqQd5CVFWz1xR/view
link fixed
Always look what you flashing, besides i ve inverted the links.
Flash this, you will recovery your phone.
prajwal05 said:
the download link at the bottom, its not working
Click to expand...
Click to collapse
i had to rebase all my work, use this:
https://mega.nz/#!kx8wGCDD!hC-l2OxIJpKEwWrOivr6TTnPpA607HQ3gm0QqH_TxPk
It's in test stage, keep this in mind. The disclaimer in the first post is still valid.
Alpha-2:
Link
-Zen i\o
-Boeffla Wakelock Blocker with specific device wkl
-Sound Control
-Kcal display control
-Fast Charge
-Toggle Input boost
-disabled gentle fair sleepers
-Performance\battery optimizations
-many more, check git
On my Nokia 7 Plus TA-1046 with Pie (march patch) the flashing of alpha 2 kernel went well and wifi works
death_jax said:
On my Nokia 7 Plus TA-1046 with Pie (march patch) the flashing of alpha 2 kernel went well and wifi works
Click to expand...
Click to collapse
Glad to hear that, we had problems with wifi. Report to me about battery\performance if you can.
Beta 1:
-250hz
-Alucard, Darkness, Darknessv5, Nightmare governors
-Disabled crc checks
-Power_Efficient_Wq
-Gpu optimizations
-Simple_gpu driver for battery\performance
-Crypto optimizations
-Cpu target optimizations flags
-Ext4 Optimizations
-selinux tuning
- -80mv Gpu Uv
-many more, check github
paul89rulez said:
Glad to hear that, we had problems with wifi. Report to me about battery\performance if you can.
Click to expand...
Click to collapse
Battery and performance seems good, like stock kernel.
The only bug that I noticed (in your and DarkOne kernel) is that the voice of someone answering a call is a bit metallic
death_jax said:
Battery and performance seems good, like stock kernel.
The only bug that I noticed (in your and DarkOne kernel) is that the voice of someone answering a call is a bit metallic
Click to expand...
Click to collapse
can you give me logs after a call? you can take it with matlog from playstore.
I n my nokia x6 all seems ok. It's a strange bug, but i will try to investigate. Thanks for the report.
A question: bluethoot it's working good for you?
Can I use this kernel with Magic?
paul89rulez said:
can you give me logs after a call? you can take it with matlog from playstore.
I n my nokia x6 all seems ok. It's a strange bug, but i will try to investigate. Thanks for the report.
A question: bluethoot it's working good for you?
Click to expand...
Click to collapse
Yes, the Bluetooth works good...
PS: if it could be useful (as you asked in the Nokia Mobile channel on Telegram to another user), I've TWRP flashed permanently (without touching vbmeta partition), Magisk with both no encryption and dm-verity
However, I can send you log, but how can I find call section?
---------- Post added at 03:41 PM ---------- Previous post was at 03:40 PM ----------
gpablo1 said:
Can I use this kernel with Magic?
Click to expand...
Click to collapse
Yes, of course.
First flash kernel and then, without rebooting, flash Magisk
After extensive testing with good testahbois (@Gravemind2015 @themetester):
DFkReborn v1.0
-removed cpu_inputboost
-msm_performance re-enabled
-Wifi\Network speed tweaks
-ExtFat support
-LA.UM-067
-Cpu\DDR boost tweaks
-Gpu Tweaks
-GraviboiFlavours
-GiorgiboiFixes
-many, many more on git.
Enjoy, and stay boi
Confirmed working like a beast on TA-1045 appreciate your efforts :highfive:
Could anybody tell me how to configure it with EX Kernel Manager?
saiz0313 said:
Could anybody tell me how to configure it with EX Kernel Manager?
Click to expand...
Click to collapse
stock settings are enough
excellent work
Sometimes I cannot use Google Camera. restore to stock kernel fixed
lllluzhnan said:
Sometimes I cannot use Google Camera. restore to stock kernel fixed
Click to expand...
Click to collapse
Same issue here. Green photos and then total crash.
No issues with stock kernel.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Designed to give better battery life without compromising performance or features
Features:
- Latest kernel tags
- Built with proton clang 11
- Built with O3 optimizations
- Use arm64 optimized functions
- Improved schedutil governor
- Use Power-efficient workqueue
- Use 300hz config
- USB fast charging
- GPU boost
- improved charging stability and speed
- use Maple IO scheduler by default
- use BBR TCP Congestion by default
- Dynamic stune boost v3
- Upstreamed and optimize CPU boost
- Disable readahead by default (improves power consumption and performance)
- CRC check toggle (disabled by default)
- Boeffla wakelock blocker
- Thermal profile control
- Kcal control
- Disable gentle fair sleepers
- Use LZ4 compression for zram by default
- Various memory, IO, and power optimizations
Installation:
- Reboot to recovery
- Backup your current kernel(boot.img)
- Go to install
- Flash kernel zip
- (reflashing magisk is not necessary)
- Reboot
- Enjoy!!
Downloads:
- Github Releases
- Builds Channel(bi-weekly builds)
Credit:
- all the people I cherry-picked from
- xda and google for having best tutorials/guides for everything
XDA:DevDB Information
Dark Ages, Kernel for the Xiaomi Poco X2
Contributors
blacksuan19
Source Code: https://github.com/Blacksuan19/kernel_dark_ages_phoenix
Kernel Special Features:
Version Information
Status: Testing
Current Stable Version: Segundo
Stable Release Date: 2020-06-27
Created 2020-05-21
Last Updated 2020-10-02
Changelog:
Tercero 03/10
• Rebase to new sm6150-dev base
• Bring on features from old Segundo release
• Boots on Android 11
• Upstream to the latest Linux stable
• Upstream wireguard to latest version
• Fixed boot issues on other roms with new trees
• Fixed always on display (roms need to enable this to work)
• Fixed slow charging while using phone
• Improved charging stability
• Improved fingerprint stability
• Improved idle drain (almost 0% now overnight)
• Disable a bunch of useless logging configs
• Various power management enhancements
• Many more improvements and performance enhancements
Segundo 27/06
- Upstream to latest 4.14.186
- Built with O3 optimizations
- Update touchscreen driver
- Fix random bootloop issue
- Fix white screen issue
- Fix Fluctuation in power
- Fix Unbalanced power supply
- Various fixes and enhancements to thermal driver
- Enable kernel ultra low power mode
- Allow GPU to go to sleep
- Improve Walt scheduler
- Block more annoying wakelocks
- Optimize memcpy and memmove
- Use arm64 optimized memcmp
- Use high priority workqueue for kgsl and devfreq
- Disable unused temperature sensors
- Remove Dynamic Fsync
- Other fixes and performance improvements
Primero 22/05
- Fix high idle battery drain
- Fix device not going into deepsleep
Primero 20/05
• Initial release
Reserved
good to see much more development here.... i really cant wait to get my device, tha pandemic is affecting tha shipping and there is delay.
Use this kernel for Havoc OS. The rom will become much better. And why aren't there any recent changelogs for the ROM?
Works with Both MIUI 12 and custom Roms ? Please reply
ft.varun said:
Use this kernel for Havoc OS. The rom will become much better. And why aren't there any recent changelogs for the ROM?
Click to expand...
Click to collapse
its already the default havoc kernel
sibikallikkat said:
Works with Both MIUI 12 and custom Roms ? Please reply
Click to expand...
Click to collapse
someone confirmed it working on MIUI, I haven't tested personally
Nice to see one more Kernel. I did test this https://github.com/Blacksuan19/kern...o-hot-fix/Dark-Ages-Primero-22052020-0313.zip
Here are my observations:
Pros:
1. Very smooth and fast (read more in cons), keeps the phone really cool
2. Good to see you have retained 300 Mhz minimum and I observed cores go to 300 Mhz very fast after tasks are done and stay there when idle
3. When the phone is idle CPU is at 300 Mhz also have seen current drain/draw is < 100 ma for 30% of times (and 40-50% of times its below 150 ma and some spikes around 200 ma - 250 ma at times) which is amazing, am sure we should get very good battery life with this.
Cons:
1. I saw few stutters at times, like freezes. I had to lock the phone n unlock it to release from those freezes (these are not due to any apps etc, faced on with this Kernel and when I went back to Optimus 10.5 (like 10.5 because it supports 300 Mhz min and not 10.6 ) I stopped seeing them, never saw any such things on optimus.
2. Even though cores go to 300 Mhz and stay there when idle, when phone is locked and nothing running in background, I saw 0% deep sleep, same settings/environment optimus sleeps like a baby
Please fix these two and this kernel is golden
coolcorner said:
Nice to see one more Kernel. I did test this https://github.com/Blacksuan19/kern...o-hot-fix/Dark-Ages-Primero-22052020-0313.zip
Here are my observations:
Pros:
1. Very smooth and fast (read more in cons), keeps the phone really cool
2. Good to see you have retained 300 Mhz minimum and I observed cores go to 300 Mhz very fast after tasks are done and stay there when idle
3. When the phone is idle CPU is at 300 Mhz also have seen current drain/draw is < 100 ma for 30% of times (and 40-50% of times its below 150 ma and some spikes around 200 ma - 250 ma at times) which is amazing, am sure we should get very good battery life with this.
Cons:
1. I saw few stutters at times, like freezes. I had to lock the phone n unlock it to release from those freezes (these are not due to any apps etc, faced on with this Kernel and when I went back to Optimus 10.5 (like 10.5 because it supports 300 Mhz min and not 10.6 ) I stopped seeing them, never saw any such things on optimus.
2. Even though cores go to 300 Mhz and stay there when idle, when phone is locked and nothing running in background, I saw 0% deep sleep, same settings/environment optimus sleeps like a baby
Please fix these two and this kernel is golden
Click to expand...
Click to collapse
Logs would be a lot more helpful for both of us
blacksuan19 said:
Logs would be a lot more helpful for both of us
Click to expand...
Click to collapse
Sorry have been busy.
Am new to this kernel things etc, if there are any links on how to get logs (or you could let me know here), would re-flash your kernel when am back and share the logs with you.
coolcorner said:
Sorry have been busy.
Am new to this kernel things etc, if there are any links on how to get logs (or you could let me know here), would re-flash your kernel when am back and share the logs with you.
Click to expand...
Click to collapse
Yhu can try catlog app... It should work!!!
@blacksuan19 do yhu mind updating tha kernel... Thanks!!!
kernel is updated almost weekly, CI builds are on the telegram channel
blacksuan19 said:
kernel is updated almost weekly, CI builds are on the telegram channel
Click to expand...
Click to collapse
What does CI means?
Thanks... Just downloaded and flashed tha latest update!
whalesplaho said:
What does CI means?
Thanks... Just downloaded and flashed tha latest update!
Click to expand...
Click to collapse
continuous-integration, meaning it will build automatically whenever there are changes to the GitHub repo
Thanks dev
I was very upset with the battery backup. But ever since I used this kernel, I am getting a very good battery backup. Please do not stop developing this kernel.
jeetu93 said:
Thanks dev
I was very upset with the battery backup. But ever since I used this kernel, I am getting a very good battery backup. Please do not stop developing this kernel.
Click to expand...
Click to collapse
Are you using it on miui or custom kernel?
fahmiroslee said:
Are you using it on miui or custom kernel?
Click to expand...
Click to collapse
Custome ROM
Does this kernel support miui? I tried flashing it on miui but my screen isn't responding to my touch.
after a long wait
tercero is finally out!
check the second post for full changelog and new features.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
[COLOR="blue"]You are not allowed to take, modify, use, upload ANY file or the whole ROM without my permissions.[/COLOR]
Your warranty (is expired? if not PM me how you managed to keep it otherwise) is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war,
or [COLOR="blue"]the unlikely scenario of you getting fired because the alarm app failed[/COLOR].
Please do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if you point the finger at
me for messing up your device, I will laugh at you.
Features
ROM
Android 7.1.1 Nougat
Based on stock J510FNXXU2BRL1
De-odexed & de-knoxed
Heavily de-bloated
Powered by AetherAura
Introduced Google's night light
Sleekier wallpapers
Build.prop tweaks
Fluid UI
Better scrolling
Kernel
Rendering
Dalvik
Bit GPU
Video acceleration
Disable spamming loggers
And more!
Lighter apps and frameworks
OMC support
And more!
KERNEL
Based on J510FNXXU2BRB1 NN source
ARCH POWER
PowerSuspend
Adreno Idler
MSM Limiter
Custom Voltage Control
INTELLI THERMAL (thermal driver)
Simpler MSM THERMAL MONITOR
INTELLI PLUG (hotplug driver)
Faux Sound Control v3.6
Adaptive LMK
USB Fast Charge
Dynamic Fsync
TCP congestion algorithms
Advanced
Cubic
Westwood (default)
Vegas
Illinois
And more!
IO schedulers
Improved BFQ
FIOPS
SIO
SIO+
ZEN (default)
Tripndroid
And more!
Aether post-boot scripts
LMK values for fortuna
Disabled adaptive LMK by default
Ultra KSM
Power-oriented workqueues
CPU overclock frequencies
1248 MHz
1363 MHz
1401 MHz
GPU overclock frequencies
465 MHz
500 MHz
550 MHz
600 MHz
620 MHz
Samsung charger controls
Quad-core power savings
And more!
Screenshots
Supported variants
SM-G530HXX
SM-G530HXC
SM-G530M (flash the fortuna3g kernel release)
SM-G530BT
SM-G530FZ
SM-G530F
What's not working
Variant: SM-G530F
Bluetooth (toggles on and off when switched on)
All variants [unfixable]
Video recording (on some apps) (however, Instagram and SC are fully functional)
Manual focus on stock camera causes kernel panic
Installation instructions and downloads
Aether Lite R10
Aether Aura latest kernel release
Huge thanks to
@TenSeventy7 - Great help and support
@Kamin4ri - Great help and support
@mdmaher - Great help and support
@vin58 - HALs from AOSP
@itexpert.120 - Kernel optimizations
@prototype74 - Google's night light and help
@BlackMesa123 - Kernel optimizations
@corsicanu - Kernel optimizations
@Bulgaricus - Kernel optimizations
@SPARTANICUS - Kernel optimizations
@Chainfire - SuperSU
Like my work? Tap that "Thanks" button!
XDA:DevDB Information
[SE] [7.1.1] Aether Lite [G530X], ROM for the Samsung Galaxy Grand Prime
Contributors
CaelestisZ
Source Code: https://github.com/CaelestisZ/AetherAura
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Latest 5.x baseband
Version Information
Status: Beta
Created 2020-06-05
Last Updated 2020-06-15
Kernel Change-log:
Ascent
Selective fortuna drivers updated
Reduced CPU average load
Enabled ARCH_POWER
Reduced kernel overheat
Introduced PowerSuspend
Introduced MSM Adreno Idler
Introduced StateNotifier
Introduced MSM Limiter
Introduced Custom Voltage Control
Introduced lpClock
And several performance optimizations
BlueFlare
Undervolt for better compatibility
Implemented fast idling of CPU
Tune task-scheduler for power savings
Introduced USB fast-charge
TCP Westwood tune-up
Fixed headphone buttons
ClangorousSoulblaze
Introduced a simpler MSM thermal monitor
Introduced Intelli-plug hotplug driver
Introduced Faux sound control
Fixed RIL, Radio (now fully functional)
Added Knox SDP/DLP
DracoMeteor
Introduced LCD notify
Introduced Dynamic FSync and ASync
Enable Adaptive LMK
Disable CRC by default
Eternatus
Disable zRAM
Enable SSWAP
Merge J510FNXXU2BRB1 ramdisk
Merge Aether post-boot scripts
Enable TCP congestion algorithms
Advanced
Cubic
Westwood
Vegas
Illinois
And more!
Introduced IO Schedulers
Improved BFQ
FIOPS
SIO
SIO+
ZEN
Tripndroid
And more!
Properly enabled ARCH POWER & gentle fair sleepers
FleurCannon
Introduced INTELLI THERMAL driver
CPUfreq, CPUidle: implement -O3 optimizations
GigavoltHavoc
Disable loads of unnecessary configurations
MSM Adreno Idler: more aggressive
Boot on all 4 cores
Attempt at enhancing power efficiency
Re-enabled kernel tick rate to 300Hz
Default TCP congestion algorithm: Westwood
Default IO Scheduler: ZEN
Set writeback parameters
dirty_background_ratio = 10%
vm_dirty_ratio = 20%
And more!
HyperspaceFury
Introduced Ultra KSM
Implemented system-wide power-oriented workqueues
Introduced Samsung charger controls
Enable quad-core power savings
CPU overclock frequencies
1248 MHz
1363 MHz
1401 MHz
GPU overclock frequencies
465 MHz
500 MHz
550 MHz
600 MHz
620 MHz
And more!
ROM Change-log
5th June 2020
Android 7.1.1 Nougat
Based on stock J510FNXXU2BRL1
De-odexed & de-knoxed
Heavily de-bloated
Powered by AetherAura
Introduced Google's night light
Sleekier wallpapers
Lighter apps and frameworks
OMC support
And more!
15th June 2020
Bump to R10.AetherLite
Installer now detects variant and deploys appropriate files
Packed with the latest release of AetherAura (FleurCannon)
Lock screen security is now fully functional
De-bloated a little more
Added build.prop tweaks
Fluid UI
Better scrolling
Kernel
Rendering
Dalvik
Bit GPU
Video acceleration
Disable spamming loggers
And more!
Updated CSC/OMC version
Fixed bugs that persist only on the G530HXC
De-knoxed for real
Join us on Telegram to stay up to date with the latest releases.
Telegram group invite: G530* Project: Aether
P.S. I do undertake device support/feature requests, provided it is a G530* and you can wait!
Nice Job Bro!
Hope that rest of the bugs will get fixed quickly.
hey guys, this is doc. havent bothered to change my username yet. (and i guess xda wouldn't allow me anyway, i already changed my username once)
actually, bluetooth only works fully on fortuna3gdtv lol (and possibly any other non-XX/XC baseband variant, eg fortunalteub / G530M)
Kamin4ri said:
hey guys, this is doc. havent bothered to change my username yet. (and i guess xda wouldn't allow me anyway, i already changed my username once)
actually, bluetooth only works fully on fortuna3gdtv lol (and possibly any other non-XX/XC baseband variant, eg fortunalteub / G530M)
Click to expand...
Click to collapse
IIRC it works on fortuna3g perfectly too
AetherLite R10 is up!
Installation instructions and downloads
Reboot into custom recovery.
Flash AetherLite_R10.zip from here: Aether Lite R10
Want root access? Latest SuperSU: SuperSU
Reboot & Enjoy!
Make sure to uncheck "Diagnostic Data" in Setup Wizard or you will have signal issues!
Do not flash Magisk with this kernel as it causes overheating and battery issues. (Due to some conflicts with LMK and Magisk)
It's normal for your device to restart once when on the boot animation after flashing SuperSU. (don't conclude it's a bootloop if that happens)
Changes made
Installer now detects variant and deploys appropriate files
Packed with the latest release of AetherAura (FleurCannon)
Lock screen security is now fully functional
De-bloated a little more
Added build.prop tweaks
Fluid UI
Better scrolling
Kernel
Rendering
Dalvik
Bit GPU
Video acceleration
Disable spamming loggers
And more!
Updated CSC/OMC version
Fixed bugs that persist only on the G530HXC
De-knoxed for real
What does this R10 symbolises here
Hi I am little confuse over here after seeing ur named rom aether lite ; actually what does this R10 symbolises here , is it that this rom has been upgraded to android 10 ?
Thank you
AYUSH NETWORK said:
Hi I am little confuse over here after seeing ur named rom aether lite ; actually what does this R10 symbolises here , is it that this rom has been upgraded to android 10 ?
Thank you
Click to expand...
Click to collapse
R10 means 10th version.
Btw the it needs to be lot more compressed according to the standards
itexpert.120 said:
R10 means 10th version.
Click to expand...
Click to collapse
Bro doesn't it suitable , means that actually file size is to much greater thn what it seems to be build for android standard
AYUSH NETWORK said:
Bro doesn't it suitable , means that actually file size is to much greater thn what it seems to be build for android standard
Click to expand...
Click to collapse
Maybe because it is aroma installer and tw-n???
Hope well
cpt_Sherman said:
Maybe because it is aroma installer and tw-n???
Click to expand...
Click to collapse
Yeah but lot's of more custom roms are there which are being pre-installed aroma features and many other lot's of valuable features ; but this is rom is what mainly creates some less advantage for download due to its large file size .
Thank you
AYUSH NETWORK said:
Yeah but lot's of more custom roms are there which are being pre-installed aroma features and many other lot's of valuable features ; but this is rom is what mainly creates some less advantage for download due to its large file size .
Thank you
Click to expand...
Click to collapse
Do me a favour and list some of the ROMs (you're talking about, probably link me to it) running Touchwiz N released for any device having the zip size less than this one? (dw I've de-bloated it leaving out all the essential features in it and added a few too)
Also, R10 features an Installer that deploys fixes and the kernel for each supported variant. (HXX/HXC/F/FZ/BT)
It's not an aroma installer that I've included.
Then again, the /system size of the zip is the same as that of our beloved stock lollipop.
Boot loop (G530BT)
EDIT: Works now, don't install supersu with twrp
AYUSH NETWORK said:
Yeah but lot's of more custom roms are there which are being pre-installed aroma features and many other lot's of valuable features ; but this is rom is what mainly creates some less advantage for download due to its large file size .
Thank you
Click to expand...
Click to collapse
Bro, this is not AOSP Rom, it is samsung's tw and nougat on that. The Stock ROM for Grand prime is roughly 600-900MB. Compared to this rom, this is much lighter and better. Also, this rom is not a build to begin with. This is a ported ROM from other samsung device.
Does this rom support OTA updates or it has been updates over air
Bro I want to ask something about this rom , is it support OTA updates ; does it get updated by software updates or u frequently update this rom with on time air upadtes ??
---------- Post added at 06:35 AM ---------- Previous post was at 06:28 AM ----------
Bro just u can please tell me in brief about it battery performance and task management ability to stand battery and stable performance of overall android for a particular time period ??
FrostyAndroid said:
Boot loop (G530BT)
EDIT: Works now, don't install supersu with twrp
Click to expand...
Click to collapse
@Kamin4ri tested SuperSU on G530BT, and it doesn't cause a boot loop in G530BT or in any of the supported variants.
It's normal for your device to restart once when on the boot animation after flashing SuperSU. (don't conclude it's a bootloop if that happens)
Next time, be patient.
Please refrain from posting messages with utmost surety when you're actually not sure about it.
New kernel release is up!
Installation instructions and downloads
Reboot into custom recovery.
Make sure you're on Aether Lite R10.
Flash AetherAura_GigavoltHavoc*.zip for your variant from here: AetherAura releases
Want root access? Latest SuperSU: SuperSU
Reboot & Enjoy!
Do not flash Magisk with this kernel as it causes overheating and battery issues. (Due to some conflicts with LMK and Magisk)
It's normal for your device to restart once when on the boot animation after flashing SuperSU. (don't conclude it's a bootloop if that happens)
Changes made
Bump to version: GigavoltHavoc
Disable loads of unnecessary configurations
MSM adreno idler: slightly more aggressive
Boot on all available cores
Attempt at enhancing power efficiency
Re-enabled kernel tick rate to 300Hz
Set writeback parameters
dirty_background_ratio = 10%
vm_dirty_ratio = 20%
Set WESTWOOD as default TCP
Set ZEN as default IO Scheduler
And more!
Like my work? Tap that "Thanks" button!
Are you taking requests?