Related
Hi all,
So I found this script which, as far as I can work out, is supposed to re-introduce the rotating buttons feature on the Incredible S, for ROMs which don't normally have that support (i.e. MIUI).
http://forum.xda-developers.com/showpost.php?p=21048049&postcount=146
Thing is, I tried flashing the .zip file via recovery and nothing has changed. I'm not sure if I've installed it incorrectly (I can find the script in /system/etc), whether the script only works for Sense based ROMs (it was taken from the Virtuous Quattro thread), or what?
Any assistance would be appreciated
CyanideJack said:
Hi all,
So I found this script which, as far as I can work out, is supposed to re-introduce the rotating buttons feature on the Incredible S, for ROMs which don't normally have that support (i.e. MIUI).
http://forum.xda-developers.com/showpost.php?p=21048049&postcount=146
Thing is, I tried flashing the .zip file via recovery and nothing has changed. I'm not sure if I've installed it incorrectly (I can find the script in /system/etc), whether the script only works for Sense based ROMs (it was taken from the Virtuous Quattro thread), or what?
Any assistance would be appreciated
Click to expand...
Click to collapse
This will only work for Virtuous Quattro, there is something in the framework calling the script in the zip which isn't present in any other ROM (unless it is a rip of virtuous quattro)
l0st.prophet said:
This will only work for Virtuous Quattro, there is something in the framework calling the script in the zip which isn't present in any other ROM (unless it is a rip of virtuous quattro)
Click to expand...
Click to collapse
I see, that makes sense. I don't suppose there would be any way someone could add back in that 'something' to a ROM, or to manually run the script via a third party bit of Software (i.e Tasker) or something? The non-rotating buttons have always been a bit of a bug-bear for me...
You can. but it requires decompiling the systemui. This should help:
http://forum.xda-developers.com/showthread.php?t=1711537&highlight=backlights
You can run the script using init.d support. When the system initializes, you can start this script.
This however has an issue that it continuously polls the device brightness and orientation and sets it to the softkeys. This maybe a little harsh on the battery life.
The other approach (as linked by l0st.prophet) is where the application subscribes to events and when display is on / off or rotated, it gets the trigger to set the softkeys. This is better on the battery but maybe slow to start (when phone boots) as this runs as an android application.
This is meant to be a guide for people interested in building AOSP based roms and is strictly for developers only. If you wish to have gesture typing in your rom the most simple way is to include/install "LatinImeGoogle.apk".
Not everyone wants to always use google's stock input apk, particularly if you have made modifications into AOSP latinime keyboard if your own and want it to propagate through to your roms without sacrificing gesture input (which i have found is quite useful). Well after some digging around there's good news and bad news.
The good news is that the gesture typing is already in the source tree on the java side and can be enabled by changing packages/inputmethods/LatinIME/java/res/values/gesture-input.xml or using the overlay in devices/../mako (not within scope of this post).
Code:
<bool name="config_gesture_input_enabled_by_build_config">true</bool>
However, just changing the value you will notice that it will draw the gesture but list no words. Thats because google didnt include the "gesture decoder" in the AOSP sources because it is super secret. You can see the code stubs in the C++ part of latinime under native/jni/src/gesture/* .
As a result, libjni_latinime.so will not contain code to decode the gestures and will not read from the dictionary.
BUT! There is a way! You can drop in replace the lib from "LatinImeGoogle.apk" into your system/lib and you will have your gesture decoder!
The library inside the apk is called "libjni_latinimegoogle.so" under /lib/<arch_type>/ inside the apk. You can extract this library from within android using program like root explorer and on PC using android apktool (http://code.google.com/p/android-apktool/). Rename this shared library to "libjni_latinime.so" to replace the AOSP built one and it will decode the gestures through the AOSP based keyboard.
Enjoy!
-removed-
Thanks for sharing the detailed instructions. This was a major annoyance..
kabir_sharma009 said:
Thanks for sharing the detailed instructions. This was a major annoyance..
Click to expand...
Click to collapse
I see you too have recently had an issue with this. I've followed everything, even using different sources for the libjni_latinimegoogle.so (noticed varing sizes) but none of them have worked for me. I installed the apk out of CM10.2.1, and the gesture trail shows up but still no library it seems. Any idea what I might have missed? Renamed file as directed and put in in the system\lib folder.
Thanks in advance for any help you may have to offer.
Edit:
Got it. Restart the phone...I feel like I should have called tech support
Re-Edit:
Negative, didn't realize at first it was set to Samsung Keyboard...Help still needed.
TheLastRebel1123 said:
I see you too have recently had an issue with this. I've followed everything, even using different sources for the libjni_latinimegoogle.so (noticed varing sizes) but none of them have worked for me. I installed the apk out of CM10.2.1, and the gesture trail shows up but still no library it seems. Any idea what I might have missed? Renamed file as directed and put in in the system\lib folder.
Thanks in advance for any help you may have to offer.
Edit:
Got it. Restart the phone...I feel like I should have called tech support
Re-Edit:
Negative, didn't realize at first it was set to Samsung Keyboard...Help still needed.
Click to expand...
Click to collapse
I've attached the file in .rar format for you, extract the .so file from the archive using WinRAR and replace the existing file in System/Lib with this one.
You might get an error while trying to replace the file if AOSP Keyboard is selected as default input method, so switch to another keyboard before replacing the file (Swype Keyboard Trial is what I used).
Thanks for getting back to me. Unfortunately it additional didn't work. Any other ideas?
kabir_sharma009 said:
I've attached the file in .rar format for you, extract the .so file from the archive using WinRAR and replace the existing file in System/Lib with this one.
You might get an error while trying to replace the file if AOSP Keyboard is selected as default input method, so switch to another keyboard before replacing the file (Swype Keyboard Trial is what I used).
Click to expand...
Click to collapse
Works perfectly for me. Thanks a lot!
Fantastic trick. Worked on my wife's S3 mini running MacClaw's latest KitKat. Thanks so much for this.
Didn't work for me, AOSP keyboard just FCs
not much of a difference between aosp & google keyboard
Sorry I thought I was on a different thread
How I got gestures working on cm11
So, I'm uncertain if this is exactly what this thread is about, but it might help someone.
Some backstory:
I had cm11 for a long time with a working Android AOSP keyboard.
After trying cm12.1 for a while I went back to cm11 with a fresh install, and noticed my gestures not doing much, and causing the FC.
I did a lot of searching, but nothing seemed to fix my problem, including the suggestions from this thread.
Since I had a nandroid of my previous installation, I did some comparisons, and came across the file libjni_unbundled_latinimegoogle.so in the /system/lib.
Copying this to my new installation fixed gesture typing for me. So now I share my solution to whoever can use it.
I hope this helps someone!
FreakyJoost said:
So, I'm uncertain if this is exactly what this thread is about, but it might help someone.
Some backstory:
I had cm11 for a long time with a working Android AOSP keyboard.
After trying cm12.1 for a while I went back to cm11 with a fresh install, and noticed my gestures not doing much, and causing the FC.
I did a lot of searching, but nothing seemed to fix my problem, including the suggestions from this thread.
Since I had a nandroid of my previous installation, I did some comparisons, and came across the file libjni_unbundled_latinimegoogle.so in the /system/lib.
Copying this to my new installation fixed gesture typing for me. So now I share my solution to whoever can use it.
I hope this helps someone!
Click to expand...
Click to collapse
Did you mean copying that lib file in location mentioned by you alone should give gesture typing ability? Because it didnt work on my zenfone with custom rom, blisspop 6.0.1
harpy.eagle said:
Did you mean copying that lib file in location mentioned by you alone should give gesture typing ability? Because it didnt work on my zenfone with custom rom, blisspop 6.0.1
Click to expand...
Click to collapse
In my situation it did, bat as mentioned I use cm11. Seems however the name is kind of related to the build of the apk. Apparently this was the same file as the one mentioned before, just with a different name.
You could try finding an older version of suitable gapps that provides a libjni_latinime.so and see if that one works...
I was able to enable gesture typing on a fresh install of CM13 without installing Gapps by extracting the file libjni_unbundled_latinimegoogle.so from the keyboard apk in openGapps for android6 (the "stock" version includes google keyboard). I placed the file in the /system/lib folder. Only difference is that I renamed that file to libjni_latinimegoogle.so . All was left was to soft reboot and enable gesture typing!
forgot to mention I set permission to -rw-r--r--
First off this work is based on Digiblur's PRL Write Enabler from the Sprint Galaxy S3 forum. I simply modified it & packaged it for our Sprint Galaxy S4 devices.
Here is the original S3 post that this was found in... http://forum.xda-developers.com/showthread.php?t=2159054
Also, post #8 below provides additional info.
I tested it by flashing with TWRP and it worked on my stock, rooted S4 with the MDC and MDL releases.
If you're on a stock rooted Rom and not using TWRP, you can just copy the HiddenMenu.apk from inside the zip file downloaded into /system/app/ and overwrite the one that's there. (You'll need a root enabled file browser to do this of course).
Thanks to Unknownforce here is a version for MJA...
http://www.androidfilehost.com/?fid=23212708291676468
Enjoy!!
This certainly will save me from having to use CDMA WS to switch like I just did yesterday. 55014 was not working well for me in my market so I switched back to 25014.
What is write enabler?
Keeps aborting for me
THEGAMEPLAY94 said:
Keeps aborting for me
Click to expand...
Click to collapse
You mean the install of the zip?
If so, you can pull the APK out of the zip and replace HiddenMenu.apk in the system folder (make a backup first). You may want to also set the permissions to rw-r-r after replacing the system app. Reboot, then you should be good to go.
@ChadH42,
I know it seems like I'm harping on you but I'm really not..
You need to update the OP on - 1. What is this? 2. What does this do? 3. Why is this in the Development Section.. ?
A good OP leads to less questions.. Development Sections aren't for information. That would be considered a Discussion Thread that belongs in General.
Let's keep the Dev section clean from the start.
My suggestion - Edit the OP on the What's/Why's?/How To's and you won't get posts like mine.
To the OP, updated your title as [WIP], and I suggest you provided additional information so that folks aren't bricking their new devices.
I will check in, if you need anything, let me know.
What this MOD does (in case the OP takes a little while to chime in)
What this MOD does is modifies our ##DATA# (select View) menu to allow for the PRL Write option to appear and function. With this menu option, the user can change their PRL on the fly from the device itself by placing a copy of the desired PRL in the root directory of Internal Storage and name it "test.prl" (no quotes), dial ##DATA# (choose View), tap Write PRL, tap the sub-menu option Write PRL ---wait--- and then the device reboots with the test.prl PRL applied upon reboot. Not every PRL works and sometimes it takes a couple of tries.
A tip for multiple PRL options is to, of course, keep a folder of the PRLs you like and keep them labeled in there. Copy the desired PRL to proper place as needed and just remember to rename the copy to "test.prl". Switch back and forth as you please. I hope this helps clear some confusion and helps some find purpose with the MOD like I have.
For a clear set of instructions that I did not want to just copy verbatim, check the link below. Also, if you are having issues with the zip not installing in CWM, just extract the APK from the ZIP (inside the system/app folder), use Root Explorer or your favorite root-access file explorer to place the APK in the APP folder, apply the proper permissions and reboot.
Ref from the GS3: http://forum.xda-developers.com/showthread.php?t=1748516
So I unzipped the file, replaced the hidden menu original apk with the new one, then set permissions, rebooted, then tried ##3282# and the view and edit options do not appear.. .. It just blanks out the items I just entered
Sent from my SPH-L720 using Tapatalk 2
jayjay7411 said:
So I unzipped the file, replaced the hidden menu original apk with the new one, then set permissions, rebooted, then tried ##3282# and the view and edit options do not appear.. .. It just blanks out the items I just entered
Sent from my SPH-L720 using Tapatalk 2
Click to expand...
Click to collapse
Did you clear Cache when you rebooted?
What ROM are you using?
ChadH42 said:
Did you clear Cache when you rebooted?
What ROM are you using?
Click to expand...
Click to collapse
+1...same thing is happenening to me...Im on force rom. when i type in the dialer code it just blanks out.
lilmikeyv said:
+1...same thing is happenening to me...Im on force rom. when i type in the dialer code it just blanks out.
Click to expand...
Click to collapse
I just tried this mod with the Force ROM and it did the same thing (blank options). The only thing I can think of is that it works with the odex version of the stock ROM so maybe its a problem with deodex ROMs of which Force is one.
O okay. Its currently not a necessary thing for me at the moment, just nice for when I travel to Alabama. Hopefully later on someone gets it working on deodex.
Sent from my Nexus 4 using Tapatalk 2
ChadH42 said:
I just tried this mod with the Force ROM and it did the same thing (blank options). The only thing I can think of is that it works with the odex version of the stock ROM so maybe its a problem with deodex ROMs of which Force is one.
Click to expand...
Click to collapse
I am actually running it on the Rooted Stock DeOdexed ROM. So I don't think it is an Odex/DeOdex issue...might be a Force ROM issue.
Also, moot point for Force ROM (1.0+) anyway because the PRL Write mod is already included with that.
I'm also having this problem and I'm pretty sure it was working this morning. I haven't flashed anything since then.
edit-- I tried:
1. wiping both cache's
2. killing background process "OIThiddenmenu"
neither fixed it.
I reinstalled the stock odex ROM and flashed this again and it worked.
Just an FYI, OP, I get Error Status 6 when trying to flash this via recovery, which indicates one of two things. Either the format of the file is incorrect or there is a syntax error. The syntax looks fine, but opening in basic Notepad shouldn't "look pretty" like it currently does. So it's likely it was edited with a non-Unix-compatible text editor like Notepad or MS-Word...
To make modifications to an updater-script (or just about any Android/Linux files like this) you need something like Notepad++ or gVim.
Anyways, I did a quick test with this, and it does in fact not work on my ROM as it is, but I see why it's failing, but I don't know what exactly it's trying to reference yet. (It fails with an id number instead of a name, so I'll have to de-compile some things to find it.)
I'm not sure it's a ROM issue or a MOD issue yet. (meaning it might have to be updated for each custom ROM, depending on how they are configured) But I'll track it down and update when I can.
Unknownforce said:
Just an FYI, OP, I get Error Status 6 when trying to flash this via recovery, which indicates one of two things. Either the format of the file is incorrect or there is a syntax error. The syntax looks fine, but opening in basic Notepad shouldn't "look pretty" like it currently does. So it's likely it was edited with a non-Unix-compatible text editor like Notepad or MS-Word...
To make modifications to an updater-script (or just about any Android/Linux files like this) you need something like Notepad++ or gVim.
Anyways, I did a quick test with this, and it does in fact not work on my ROM as it is, but I see why it's failing, but I don't know what exactly it's trying to reference yet. (It fails with an id number instead of a name, so I'll have to de-compile some things to find it.)
I'm not sure it's a ROM issue or a MOD issue yet. (meaning it might have to be updated for each custom ROM, depending on how they are configured) But I'll track it down and update when I can.
Click to expand...
Click to collapse
Thanks for all your help here..
I had the error status 6 problem in the beginning and thought I fixed it. You are correct that I used MS WordPad to edit the files.
ChadH42 said:
Thanks for all your help here..
I had the error status 6 problem in the beginning and thought I fixed it. You are correct that I used MS WordPad to edit the files.
Click to expand...
Click to collapse
I think TWRP can read the non Unix type characters, which is why it works on a different recovery.
I'm hoping it's a mod issue and I can just modify the mod to work universally regardless of the rom. But we'll see.
Sent from my SPH-L720 using xda app-developers app
fails in recovery for me.
says error executing updater binary in zip
in stock rooted...
DXMD3 Stock Jelly Bean Phabletized!
DISCLAIMER TIME:
First thing's first: I am not a chef, nor am I a developer of any sort. This was just an experiment and it worked. All I'm doing is sharing the results and the method of achieving them.
Also, I am in no way responsible if you mess up your device. That said, these modifications are mostly harmless and reversible, if you follow the instructions to the letter. (Worst case scenario: You flash stock JB again or restore a nand backup and you're safe.)
Oh and your device must be rooted. You can't go around changing things if it's not.
I do need a bit of help with some things, you can read the help wanted section at the bottom of the post,
If you're still interested, read on.
INTRO SPEECH:
I've always wanted the phablet experience on my 7.7, but all of the roms I've tried had imperfections (if ever so slight). If any developers are reading this, please do not take this as an insult. Your roms are wonderful masterpieces. I admit I couldn't even begin to understand how much knowledge and hard work is poured into them. I just wanted a 100% daily driver to have and to hold, meaning as few updates as possible (oh the irony). The closest I could find to a perfect rom was the PAC rom by @daniel_hk, but it always started acting out after a couple of weeks. Might have also been my apps or a combination of apps that did this, I don't know. The customization options on PAC are… It's simply amazing. If you're up for it, do check it out in the development thread. Out of all the roms I've tried, I liked PAC the best. That was a message from our (non)sponsors (my personal opinion). Then I tried E-Robot, which is almost stock – I'd say it's a Note 8 rom modified for our 7.7. But it still didn't feel right. I went back to the stock JB rom and started thinking I could simply alter build.prop's dpi setting and get phablet on stock JB. I was half-right. I did alter it and got phablet mode, but a lot of apps stopped working, a few of them crucial (phone, contacts, …). So I started replacing those apps with apps from the E-Robot rom. And it worked. I've identified and replaced most of the apps and the rom is very smooth. I dare say it's even smoother than E-Robot.
List of apps that need replacing:
- Accuweather
- Most mini apps
- Pen memo
- Camera
- Gallery
- Calculator
- S Planner / Calendar
- Phone
- Contacts
- TouchWiz Launcher
- Task manager
- Memo (text memo)
List of apps I haven't yet found replacements for (HELP WANTED, see below):
- Samsung keyboard
- Reader's hub
APPS YOU'LL NEED:
I like ES File Explorer the most, you can use other file managers if you like. LINK
I find it easiest to flash roms with Mobile ODIN. LINK
If you're not interested in purchasing Mobile Odin, you can look it up on XDA forums. It's available for free.
7zip. You'll need to unzip the package. LINK
APP SUBSTITUTION PACKAGE:
LINK
Please, do not mirror this as these instructions are not yet 100% complete.
INSTRUCTIONS:
Read first. Then apply.
1) Get the stock DXMD3 Jelly Bean on www.samfirmware.com
2) I can't stress this enough: Back up all of your files on your internal storage. All of them. I will not be blamed for the loss your lolcat collection.
3) Flash it with Mobile Odin and choose to root the rom and inject superuser
4) A custom recovery is probably a good idea. Use either CWM or TWRP and make a full system backup. Just in case. Easiest to flash with Odin.
5) Unzip the "PHABLETIZE!" package to your tablet internal storage.
6) Default home to a custom launcher. Just in case. I used Apex. (You'll be replacing TouchWiz, remember?) Also, Install a custom keyboard. The stock keyboard isn't happy with 213dpi. I use Jelly Bean Keyboard.
7) Turn on "Root Explorer" mode in ES File Explorer (side menu, accessible from the top left bluish globe icon)
7a) Alternatively, you can use LCDDensity from Play. I haven't tested this personally. This is a recommendation from obbeguin. Skip step 8.
8) Make a backup of your build.prop file. Edit the build.prop to be used by the system (/system/build.prop): "ro.sf.lcd_density=160" changed to "ro.sf.lcd_density=213" (the one between rild.libargs and ro.lcd_brightness)
9) Restart and marvel at the half-finished glory of phablet mode.
10) Here is where you would see TouchWiz crash and you'd be stuck if you hadn't defaulted to a custom launcher in step 6. Luckily, you did.
11) Open ES, navigate to /system/app/ and start replacing the apps from the package. Yes, manually. I don't know how to make a CWM flashable package, so again, yes, manually. (HELP WANTED) I'd also recommend backing up the original files (just copy them to a backup folder on your storage). All apps should replace just fine, since they crash when launched anyway. You should also backup and delete their odex counterparts. Do not replace those.
12) I haven't included the camera and gallery apks. The gallery wasn't working well and I found a replacement here. Not sure yet if I can hijack his files to use in my zip so I'm posting a link for the time being. Also, I've found I like the SGS4 dialer and messaging app much better than the tablet apps from Note8. Look for it here.
13) Restart
14) If you have any issues with any of the apps, first try clearing their caches and data or wiping dalvik cache and cache in recovery mode.
I'd also recommend SkyHigh's custom kernel. I like it and it allows me to use ExFat on my external SD card. It's no NTFS, but large files (>4GB) get across just fine and it works on my computer and in my tablet without a hitch.
And for that extra "Startled Android" effect, I went with Xposed framework and per-app dpi settings. Not quite paranoid but does the job ok.
If you like the Samsung keyboard, you might want to give this one a go. Suggested by @stenny
HELP WANTED SECTION:
As written before, I need some help. It would be tons easier to just flash a CWM package over the stock JB and get phablet mode. Trouble is, I can't build it. Getting around to this one. Got around to it. Now I'm having scripting problems. If anyone is script savvy, please check out the code below.
I have no clue where to find a replacement Reader's hub app – one that works on 213dpi instead of 160dpi If anyone knows where I could find it, please leave a comment.
Don't hesitate to leave your feedback in the comments.
Unhide to see the script code.
#!/sbin/sh
# remove old backup
[ -d /sdcard/phabletize/backup ] && rm -r /sdcard/phabletize/backup
# backing up original apk
echo "Backing up /system/app/"
busybox mkdir -p /sdcard/phabletize/backup/system/app
busybox mkdir -p /sdcard/phabletize/system/app
cd /sdcard/phabletize/list/
for f in $(ls)
do
echo "Processing $f"
busybox cp /system/app/$f /sdcard/phabletize/backup/system/app/
busybox rm /system/app/$f
done
echo "Backups done for system apps"
# backing up original build.prop
echo "Backing up /system/build.prop"
cp /system/build.prop /sdcard/phabletize/backup/system/build.prop
echo "Backup done for build.prop"
# delete odex files and old apk files
echo "Deleting original odex and apk files from /system/app"
cd /sdcard/phabletize/list
for f in $(ls)
do
echo "Processing $f"
busybox rm /system/app/$f
done
echo "Original odex and apk files deleted. Don't worry. You still have your backup."
# for each of the system apps needing processed
echo "Copying modified apks to /system/app"
cd /sdcard/phabletize/system/app
cp -p * /system/app
echo "Finished copying modified apks"
# copy modified build.prop
echo "Copying modified build.prop to /system"
cd /sdcard/phabletize/system
cp -p build.prop /system
echo "Finished copying modified build.prop"
# the end
echo "All done. Enjoy you Phabletized 7.7 JB"
The above left my tablet in a bootloop stuck on the bootanimation turned landscape and distorted/stretched. I was trying to accomplish the following: back up the original apks and build.prop file to a folder on the sdcard. The list of apks needing backups would be determined from the list of apks in the replacement folder. And copying the replacement apks and build.prop file to the proper folder in /system.
I hope I've proofread this enough times so that it's decent...
Screenshots:
They're big. There are many, Unhide to see.
Mostly just showing off the Samsung apps. From my experience, most apps are a lot easier to handle on a bigger dpi. Again, if on some apps you don't like the change...go with Xposed framework.
Undoubtedly you'll notice how the fonts in the Settings app seem smaller than the rest of the rom and the alarm clock app seems bigger. You're right. They are. That's Xposed + App settings hard at work. I want the alarm clock buttons big when I'm smacking the **** out of my tab in the morning (300dpi) and don't need the big fonts when I'm fiddling with the settings (160dpi).
By the way, don't mind the "25% brightness" (I had it at -28% on some other screenshot). That's just Lux. It helps keep the display at a comfortable level in the dark. A screen filter basically. I also found this and this very helpful on a big screen and fiddly-sometimes-hard-to-press-when-your-hands-are-messy-when-cooking-and-just-need-to-look-at-the-recipe-one-more-time buttons (the other two persistent notifications).
Coming soon: Flashable zip. I'll get around to it, I promise. Having trouble scripting the thing. Take a look at the help wanted section if you think you can help. Thanks.
It is wonderful seeing someone try to create something for our Tablets...
I wish I could help in your efforts but instead I can only thank and applause you...
Good luck...
actually... e-robot doing the same thing that you're doing... replacing the apk from note 8.0 to 7.7 but they did alter some apk to fit their mod.
btw. you can use the keyboard from e-robot as well. but you need to find all related lib files to make it work on 7.7
Conserning cwm flashable zips... I don't know the syntax either. But I just use a zip from gapps and delete all the contents and modify the outputted text. Don't use a zip from a rom because they often wipe stuff.
Sent from my GT-p6800 using xda app-developers app
Lemme start by giving you a well deserved thanks and excellent job.
Can you maybe post a few screenshots and maybe even a video of you have time?
Sent from my GT-P6800 using xda app-developers app
zip
You can use the app "app2zip". It shows you all installed apps, then you choose yours from your pack and
click create. This zip file is then flashable in the recovery.
edan1979 said:
actually... e-robot doing the same thing that you're doing... replacing the apk from note 8.0 to 7.7 but they did alter some apk to fit their mod.
btw. you can use the keyboard from e-robot as well. but you need to find all related lib files to make it work on 7.7
Click to expand...
Click to collapse
Doesn't e-robot have some issues? I got the distinct feeling it wasn't quite so stock. I might be wrong though.
EDIT: Now I remember! I couldn't get over the flickering wifi icon in the status bar. Annoyed the **** out of me. Trivial, I know. I could live with something not working quite right if it wasn't visible most of the time.
{Diemex} said:
Conserning cwm flashable zips... I don't know the syntax either. But I just use a zip from gapps and delete all the contents and modify the outputted text. Don't use a zip from a rom because they often wipe stuff.
Sent from my GT-p6800 using xda app-developers app
Click to expand...
Click to collapse
Good tip. Thanks!
vivalamoza said:
Lemme start by giving you a well deserved thanks and excellent job.
Can you maybe post a few screenshots and maybe even a video of you have time?
Sent from my GT-P6800 using xda app-developers app
Click to expand...
Click to collapse
I'll take some and post asap.
konsolen said:
You can use the app "app2zip". It shows you all installed apps, then you choose yours from your pack and
click create. This zip file is then flashable in the recovery.
Click to expand...
Click to collapse
Can this create a single zip for multiple apps or is it one app = one zip?
It creates one ZIP file. So exactly what you looking for.
Just a quick update:
I'm working on a cwm flashable zip that would back up the original apk and odex files and copy the new ones in place. Plus, I've been toying around with other versions of system apps.
I will be posting everything in the next few days - after I test it out.
Cheers
paranoiadk said:
DXMD3 Stock Jelly Bean Phabletized!
INSTRUCTIONS:
Read first. Then apply.
1) Get the stock DXMD3 Jelly Bean on www.samfirmware.com
2) I can't stress this enough: Back up all of your files on your internal storage. All of them. I will not be blamed for the loss your lolcat collection.
3) Flash it with Mobile Odin and choose to root the rom and inject superuser
4) A custom recovery is probably a good idea. Use either CWM or TWRP and make a full system backup. Just in case. Easiest to flash with Odin.
5) Unzip the "PHABLETIZE!" package to your tablet internal storage.
6) Default home to a custom launcher. Just in case. I used Apex. (You'll be replacing TouchWiz, remember?) Also, Install a custom keyboard. The stock keyboard isn't happy with 213dpi. I use Jelly Bean Keyboard.
7) Turn on "Root Explorer" mode in ES File Explorer (side menu, accessible from the top left bluish globe icon)
8) Make a backup of your build.prop file. Edit the build.prop to be used by the system (/system/build.prop): "ro.sf.lcd_density=160" changed to "ro.sf.lcd_density=213" (the one between rild.libargs and ro.lcd_brightness)
9) Restart and marvel at the half-finished glory of phablet mode.
10) Here is where you would see TouchWiz crash and you'd be stuck if you hadn't defaulted to a custom launcher in step 6. Luckily, you did.
11) Open ES, navigate to /system/app/ and start replacing the apps from the package. Yes, manually. I don't know how to make a CWM flashable package, so again, yes, manually. (HELP WANTED) I'd also recommend backing up the original files (just copy them to a backup folder on your storage). All apps should replace just fine, since they crash when launched anyway. You should also backup and delete their odex counterparts. Do not replace those.
12) Restart
13) If you have any issues with any of the apps, first try clearing their caches and data.
Click to expand...
Click to collapse
Concerning the point 7 & 8, wouldnt it be easier to just use LCDDensity for root ?
Using it, it is must more easy to change the density without even having to manually modify the build.prop file... And the phablet mod start for any density higher than 180..
And for people who forgot to install a second launcher, they no need to panic..
They can still go to the tablet settings using the notification bar, even if Touchwiz doesnt work.
There, they can check they are connected to internet and install a second launcher by logging on google play by using a PC.
obeguin said:
Concerning the point 7 & 8, wouldnt it be easier to just use LCDDensity for root ?
Using it, it is must more easy to change the density without even having to manually modify the build.prop file... And the phablet mod start for any density higher than 180..
And for people who forgot to install a second launcher, they no need to panic..
They can still go to the tablet settings using the notification bar, even if Touchwiz doesnt work.
There, they can check they are connected to internet and install a second launcher by logging on google play by using a PC.
Click to expand...
Click to collapse
Never heard of LCDDensity before, but I'll add it to the instructions.
You're correct, the phablet ui starts at 180 (176 I believe), but the navigation bar keys are off center when lcd density is not set to 213.
Sort of defeats the purpose of phablet ui for me. Personally, I changed to a smaller dpi (for a smaller status bar - 195) and removed the navigation bar with the qemu.hw.mainkeys switch. I mainly navigate thru gestures (using GMD Gesture Control) anyway.
Again, you're correct. But when starting out on a freshly flashed rom, some might happen to skip the part where they connect to the wifi or connect their google account. Besides, I've seen Play being hesitant to install and update on it's own - sometimes it requires you to launch it before you get update notifications and automated app downloads which requires a launcher. I want the instructions to be as foolproof as possible. That's why I'll be making a separate flashable zip with a custom home and keyboard, just in case.
On that topic, do you know anything about scripting? I'm having trouble with the update script. Check out the first post.
You can try this note 8 samsung keyboard, it work on both tablet and phablet ui.
http://forum.xda-developers.com/showthread.php?t=2228836
Sent from my GT-P6800 using XDA Premium 4 mobile app
paranoiadk said:
DXMD3 Stock Jelly Bean Phabletized!
DISCLAIMER TIME:
First thing's first: I am not a chef, nor am I a developer of any sort. This was just an experiment and it worked. All I'm doing is sharing the results and the method of achieving them.
Also, I am in no way responsible if you mess up your device. That said, these modifications are mostly harmless and reversible, if you follow the instructions to the letter. (Worst case scenario: You flash stock JB again or restore a nand backup and you're safe.)
Oh and your device must be rooted. You can't go around changing things if it's not.
I do need a bit of help with some things, you can read the help wanted section at the bottom of the post,
If you're still interested, read on.
INTRO SPEECH:
I've always wanted the phablet experience on my 7.7, but all of the roms I've tried had imperfections (if ever so slight). If any developers are reading this, please do not take this as an insult. Your roms are wonderful masterpieces. I admit I couldn't even begin to understand how much knowledge and hard work is poured into them. I just wanted a 100% daily driver to have and to hold, meaning as few updates as possible (oh the irony). The closest I could find to a perfect rom was the PAC rom by @daniel_hk, but it always started acting out after a couple of weeks. Might have also been my apps or a combination of apps that did this, I don't know. The customization options on PAC are… It's simply amazing. If you're up for it, do check it out in the development thread. Out of all the roms I've tried, I liked PAC the best. That was a message from our (non)sponsors (my personal opinion). Then I tried E-Robot, which is almost stock – I'd say it's a Note 8 rom modified for our 7.7. But it still didn't feel right. I went back to the stock JB rom and started thinking I could simply alter build.prop's dpi setting and get phablet on stock JB. I was half-right. I did alter it and got phablet mode, but a lot of apps stopped working, a few of them crucial (phone, contacts, …). So I started replacing those apps with apps from the E-Robot rom. And it worked. I've identified and replaced most of the apps and the rom is very smooth. I dare say it's even smoother than E-Robot.
List of apps that need replacing:
- Accuweather
- Most mini apps
- Pen memo
- Camera
- Gallery
- Calculator
- S Planner / Calendar
- Phone
- Contacts
- TouchWiz Launcher
- Task manager
- Memo (text memo)
List of apps I haven't yet found replacements for (HELP WANTED, see below):
- Samsung keyboard
- Reader's hub
APPS YOU'LL NEED:
I like ES File Explorer the most, you can use other file managers if you like. LINK
I find it easiest to flash roms with Mobile ODIN. LINK
If you're not interested in purchasing Mobile Odin, you can look it up on XDA forums. It's available for free.
7zip. You'll need to unzip the package. LINK
APP SUBSTITUTION PACKAGE:
LINK
Please, do not mirror this as these instructions are not yet 100% complete.
INSTRUCTIONS:
Read first. Then apply.
1) Get the stock DXMD3 Jelly Bean on www.samfirmware.com
2) I can't stress this enough: Back up all of your files on your internal storage. All of them. I will not be blamed for the loss your lolcat collection.
3) Flash it with Mobile Odin and choose to root the rom and inject superuser
4) A custom recovery is probably a good idea. Use either CWM or TWRP and make a full system backup. Just in case. Easiest to flash with Odin.
5) Unzip the "PHABLETIZE!" package to your tablet internal storage.
6) Default home to a custom launcher. Just in case. I used Apex. (You'll be replacing TouchWiz, remember?) Also, Install a custom keyboard. The stock keyboard isn't happy with 213dpi. I use Jelly Bean Keyboard.
7) Turn on "Root Explorer" mode in ES File Explorer (side menu, accessible from the top left bluish globe icon)
7a) Alternatively, you can use LCDDensity from Play. I haven't tested this personally. This is a recommendation from obbeguin. Skip step 8.
8) Make a backup of your build.prop file. Edit the build.prop to be used by the system (/system/build.prop): "ro.sf.lcd_density=160" changed to "ro.sf.lcd_density=213" (the one between rild.libargs and ro.lcd_brightness)
9) Restart and marvel at the half-finished glory of phablet mode.
10) Here is where you would see TouchWiz crash and you'd be stuck if you hadn't defaulted to a custom launcher in step 6. Luckily, you did.
11) Open ES, navigate to /system/app/ and start replacing the apps from the package. Yes, manually. I don't know how to make a CWM flashable package, so again, yes, manually. (HELP WANTED) I'd also recommend backing up the original files (just copy them to a backup folder on your storage). All apps should replace just fine, since they crash when launched anyway. You should also backup and delete their odex counterparts. Do not replace those.
12) I haven't included the camera and gallery apks. The gallery wasn't working well and I found a replacement here. Not sure yet if I can hijack his files to use in my zip so I'm posting a link for the time being. Also, I've found I like the SGS4 dialer and messaging app much better than the tablet apps from Note8. Look for it here.
13) Restart
14) If you have any issues with any of the apps, first try clearing their caches and data or wiping dalvik cache and cache in recovery mode.
I'd also recommend SkyHigh's custom kernel. I like it and it allows me to use ExFat on my external SD card. It's no NTFS, but large files (>4GB) get across just fine and it works on my computer and in my tablet without a hitch.
And for that extra "Startled Android" effect, I went with Xposed framework and per-app dpi settings. Not quite paranoid but does the job ok.
If you like the Samsung keyboard, you might want to give this one a go. Suggested by @stenny
HELP WANTED SECTION:
As written before, I need some help. It would be tons easier to just flash a CWM package over the stock JB and get phablet mode. Trouble is, I can't build it. Getting around to this one. Got around to it. Now I'm having scripting problems. If anyone is script savvy, please check out the code below.
I have no clue where to find a replacement Reader's hub app – one that works on 213dpi instead of 160dpi If anyone knows where I could find it, please leave a comment.
Don't hesitate to leave your feedback in the comments.
Unhide to see the script code.
#!/sbin/sh
# remove old backup
[ -d /sdcard/phabletize/backup ] && rm -r /sdcard/phabletize/backup
# backing up original apk
echo "Backing up /system/app/"
busybox mkdir -p /sdcard/phabletize/backup/system/app
busybox mkdir -p /sdcard/phabletize/system/app
cd /sdcard/phabletize/list/
for f in $(ls)
do
echo "Processing $f"
busybox cp /system/app/$f /sdcard/phabletize/backup/system/app/
busybox rm /system/app/$f
done
echo "Backups done for system apps"
# backing up original build.prop
echo "Backing up /system/build.prop"
cp /system/build.prop /sdcard/phabletize/backup/system/build.prop
echo "Backup done for build.prop"
# delete odex files and old apk files
echo "Deleting original odex and apk files from /system/app"
cd /sdcard/phabletize/list
for f in $(ls)
do
echo "Processing $f"
busybox rm /system/app/$f
done
echo "Original odex and apk files deleted. Don't worry. You still have your backup."
# for each of the system apps needing processed
echo "Copying modified apks to /system/app"
cd /sdcard/phabletize/system/app
cp -p * /system/app
echo "Finished copying modified apks"
# copy modified build.prop
echo "Copying modified build.prop to /system"
cd /sdcard/phabletize/system
cp -p build.prop /system
echo "Finished copying modified build.prop"
# the end
echo "All done. Enjoy you Phabletized 7.7 JB"
The above left my tablet in a bootloop stuck on the bootanimation turned landscape and distorted/stretched. I was trying to accomplish the following: back up the original apks and build.prop file to a folder on the sdcard. The list of apks needing backups would be determined from the list of apks in the replacement folder. And copying the replacement apks and build.prop file to the proper folder in /system.
I hope I've proofread this enough times so that it's decent...
Click to expand...
Click to collapse
Didn't work for me, lots of apps couldn't be pasted in system/app even after R/W, I even tried to do it in TWRP and it still failed
vivalamoza said:
Didn't work for me, lots of apps couldn't be pasted in system/app even after R/W, I even tried to do it in TWRP and it still failed
Click to expand...
Click to collapse
My suggestions:
You sure you're rooted?
You might have free space issues. Try disabling and uninstalling the apps from titanium backup and then pasting the apps in place. Samsung roms are pretty huge and fill the available space almost to the limit.
Pasting sometimes didn't work for me when the apps were running. Try closing them from a task manager. I always did the modding after a fresh boot on a fresh rom.
I hope this is helpful.
Had some free time recently so finally got round to opening my OYUA and having a looksy.
ROMCleaner 3.5 works splendid with CWM and OUYA.
Why use it with the OUYA?
Its a fast and easy way to pre-install all your apps and games through a single zip flash in CWM.
No more sideloading Dropbox to download and install everytime you flash a new StockPlus or OTA, have them all ready and waiting for you upon the first boot of the ROM.
If your familiar with ROMCleaner on one of the many devices we ported it to, you'll feel right at home!
As certain design decisions were overlooked with the OUYA and it didt get the following it was expected, I didnt wont make a big deal aout the release but couldnt help playing about with to see what I could get working on it. It worked fine so here we are
Notes
More detaililed guides and instructions can be found in any of the device specific threads for ROMCleaner if you want to have a look at its features but for now Ill leave this little guide for us OUYA users.
I doubt there will be a Aroma version due to its reliance on touch input but will slowly be looking at going through the other individual tools we created before Patrics83 put the Aroma AIO toolkit together.
It starts at v3.5 as this was the last version before moving to Aroma and we kept that consistent across devices.
Any changes will only be visually to the updater-script and the default romcleaner.txt included in the zip as at its core, RC works. I will keep a dated chagelog for you though for any updates to the zip.
Basic Guide
Pre-Requisetes:ClockworkMod Recovery
On your on the root of /sdcard create a (case sensitive) folder structure as so:
Code:
/sdcard/ROMCleaner/FirstBoot/data/app/
/sdcard/ROMCleaner/FirstBoot/system/app/
Place any apks in these folders which you want installed after flashing in the relevent folders
After flashing the ROM, flash ROMCleaner 3.5.zip
Reboot as normal
First boot of the ROM will take extra time due to the apks being sorted by Android when its up and running you will find all the apps in the usual place all ready and waiting!
If you install another launcher I recommend loading OUYA Launcher first and following the setup (wifi, username etc) to get it all sorted before using your preferred launcher.
You can use RC to install other files such as bootanimation.zip (system/media/) as well and are not limited to just apks. I add TwitcyEye's KeyMap mod for example so the mapping is done with no copying files about.
It will set the correct permissions for all the files and folders so dont worry about that.
Cleaning
ROMCleaner has the ability to remove files from the system after the ROM has been flashed, but before first boot, using a text file in a simple user-friendly format.
The default list has not been optimized for OUYA and I have not got round to checking through it yet. I haven't noticed any thing important if it does but you have been warned Ill take a proper look when I get the time.
You have the ability to define a custom list for RC to use by creating a ROMCleaner_user.txt file in /sdcard/ROMCleaner/ and Ive attached a blank one with some detailed instructions on its layour and format. I recommend you use this file until I have time to cross reference the default list with the OUYA files to avoid anything being deleted.
All in all its an easy way to get your apps installed when flashing a ROM be it StockPlus or an official OTA. It requires no special access as its all done in recovery and uses its own busybox.
Anyway, Have a play and let me know how it works for you.
Like a lot of people on XDA I have very little free time these days due to my job and so-called life but will be keeping my eye on this thread and the OUYA in general
#probably for formatted guide
#just in case
Is ROMcleaner able to load any type of complete backups from Titanium Backup or Android Tuner? I'm sure the answer is on your site, but it is probably a question a lot of people will have.
Sent from my SCH-I535 using Tapatalk 4
TadeoNYC said:
Is ROMcleaner able to load any type of complete backups from Titanium Backup or Android Tuner? I'm sure the answer is on your site, but it is probably a question a lot of people will have.
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
Unfortunately thats a completely different thing. All this is done in recovery where as TB etc are app specific done while the OS is up and running.
RC installs (and can remove) the apps before the OS has loaded for the first time.