Hello,
Is it me, but after installing the latest N920-T T-mobile firmware N920TUVS4DQA2, I'm now unable to install TWRP via odin, using all the correct versions odin, twrp, USB, OEM all switched on, finger prints off. Odin process works no errors, phone reboots, try to get into recovery mode, then default recovery screens reappears, no TWRP. Thanks.
Using previous firmware and using the same software and procedures it all worked previously, what have I forgotten!!!!!
Enable oem unlock in the development settings.
On the odin dont clickauto reboot. After the instalation of the TWRP finished disconnect the device from pc. Hold power and volume down Phone will reboot dont allowthat. Quickly press the volume up and power and home button.
SM-N920S cihazımdan Tapatalk kullanılarak gönderildi
Related
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again :-(
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
If you can get into download mode (power off, hold V+/V-, insert USB), you can try flashing a ROM via Heimdall. Apex 12.5 has a package you can flash from Heimdall.
You can also try Mosaic 9, as that has an Odin-based installer package.
surendar1863 said:
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again :-(
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
Click to expand...
Click to collapse
yes you can, use the link below and download any of the latest rom with bootloader based on odin.
http://forum.xda-developers.com/showthread.php?t=1300843
Galaxy Grand Bricked
Hey there., ive got the same problem too., cant go to recovery mode and stuck in a bootloop.,
IS there a remedy ?? PLEASE HELP
KrisjNoel said:
Hey there., ive got the same problem too., cant go to recovery mode and stuck in a bootloop.,
IS there a remedy ?? PLEASE HELP
Click to expand...
Click to collapse
Read above, the answer was given.
http://forum.xda-developers.com/showthread.php?t=1300843
same problem but on a different device its gt-i9070 by samsung I download ROMs already but cant flash them there is absolute no custom recovery for this model tried anything and everything on google and xda , any solution to apply ROM not using recovery
Is this file can use to flash i9300??? Where can i get custom rom for gt-i9300 that flash via odin...bcoz my s3 also cannot boot to recovery mode to hard reset
Hey,
I'm using samsung galaxy star s5282. I rooted this phone 2 days ago. Everything went good until today when i was i my class it suddenly switched off. When i rebooted it, it hang on the samsung logo.
I tried to boot into cwm recovery mode by pressing v+, home, power but it boots into default system recovery mode.
I again flashed cwm recovery many times using odin but it dosent work. Odin shows pass but when i reboot my phone in cwm recovery mode my phone enters in default system recovery mode.
What should i do please please please help.....
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
applies to all recoveries
cheers
bhavnoor singh
surendar1863 said:
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
Click to expand...
Click to collapse
Surenda 1863,
I had exactly the same problem and it took me almost one week of fiiddling and searching the Web to solve it.
The solution was in front me since day ONE : install ODIN on the PC !
In my case, I had I had accidentally wiped out the stock ROM and the tablet was hopelessly frozen on the download mode. I couldn't turn it off to boot it back with any of the usual buttons ( Volume , Home, Power)
I made the wrong assumption that since my PC didn't see the tablet, it couldn't connect to Odin either . I was wrong!
Here is what you have to do:
1. Install Odin on your PC. Connect the tablet to it. You will see that Odin sees the tablet because there will be a caption saying "added" on the top left.
2. Press the AP tab button at the right to go to the location where your Stock ROM is. The stock ROM file will have an MD5 ending.
3 Once the file is loaded (next to the AP button) just press Start. You will see the DOWNLOAD bar gradually filling up on the tablet and at the top left of ODIN.
4. When the operation is terminated, you will see a caption " PASSED" at the top left of he Odin screen and the tablet will automatically boot up to the HOME screen.
As simple as this! I didn't even have to worry about flashing the TWRP ( or CWR) recovery system, probably because the OS ROM was already wiped out. May be your case is different. I only know that in my case it worked like a charm.
Ittiandro
Hello,
After 1.5 years on B136 I've decided to move to a Lollipop rom. I've wiped my device, flashed stock recovery from B609 and wanted to force-update from sd card .... and device didn't boot into recovery at all.
So far the only recovery that works for me is TWRP, but I can't flash stock roms with it. When I flash (with fastboot) a stock recovery (doesn't matter which, I;ve tried B133Sp01, B136, B609, B852), my device goes into bootloop or just reboots while in the recovery.
I need to rescue my phone now.
Any ideas... ?
This is as far as I get:
Extracted cust / boot / recovery and system from B136 and flashed them with fastboot.
Device reboots, shows Huawei logo, plays animation and sound. After a while - it reboots and goes into recovery.
Recovery is in chinese.
Device stays in recovery for a few seconds then reboots itself.
And on and on....
Does anyone have any clue why this device keeps rebooting itself all the time?
Update:
Since TWRP was working for me, I've tried couple custom roms. Results:
TWRP + material one test rom: flashed fine, got boot screen, got boot animation.... device reboots. After second reboot goes into recovery.
TWRP + B609 test port: same as above.
What can it be that makes my device reboot over and over again, even when in recovery?
I'm out of ideas. Please help.
Thanks.
@GawDroid, try my method,
Download B852 official ROM and copy it to root of your SD card to a new folder "dload"
It should look like this "/dload/UPDATE.APP"
Extract UPDATE.APP (on your computer) using Huawei Update Extractor (all files)
Go into bootloader (Power + Vol Down)
Now open command line and use ADB (Android Debugging Bridge) to send following commands to your phone:
fastboot flash recovery RECOVERY.IMG
fastboot flash boot BOOT.IMG
Now force update by turning off your phone, and turing him back on while holding all 3 buttons pressed down.
When screen comes on release the Power button but keep holding both Volume rockers pressed down until you see an EMUI logo.
If for any reason it fails to install, go back into recovery and do Wipe data/Factory Reset, and than try again.
Let us know how it went
Okay, I did exactly this today:
Extracted boot and recovery from B852 update.app
Flashed both with fastboot
Put dload/update.app on sd card
Started phone in force update mode (vol +, vol -, power)
Phone shows "Huawei Ascend" logo for 30 seconds and shuts down.
I cannot enter recovery either. Phone does the same as above (huawei screen, shutdown).
I have never had an EMUI 3 rom installed before, maybe that's why this recovery can't start? Just guessing...
,
Flash the boot.img first and then the update
Enviado desde mi HUAWEI P7-L10 mediante Tapatalk
Fefo64 said:
Flash the boot.img first and then the update
Click to expand...
Click to collapse
This is how I did it. First boot.img, then recovery.img, then tried to update.
Up. Any ideas why it keeps rebooting regardless of ROM, or even in recovery?
Hello Guys, I have a bad situations here, so I will give you info what I have done.
1. Auto-update to EMUI 5 Android 7.0 B378
2. Unlock the bootloader
3. Flash modified B378 boot image+phh+ JRummy's Busybox Installer
4. Enter in fastboot mode and install twrp 3.0.3.0 (succefully install)
5. Fastboot reboot and then remove the usb cable and boot into recovery by pressing the vol. up
After the reboot and boot into recovery (3 seconds hold the vol. up)turns out that I am located into Huawei eRecovery. When I hit the "Download lates version and recovery" nothing happen I received an error that I am not able to install it.
Also the TWRP is not isntalled and at the End I do not have an Recovery and I am not able to install any thing.
My question is did I somehow brick my phone, What are the exact steps for installing TWRP ???
THanks in advanced.
If you power down completely, and then hold vol up and power, you should enter twrp. That works for me
Sendt fra min EVA-L09 med Tapatalk
Yep, it works. Thanks mate!!!!
Hi guys how to root Note 5 Nougat stock 7.0 Firmware?
SM-N920C cihazımdan gönderildi
Nougat 7.0 root
As @Ijaz Farooq answered here :
1- Twrp https://dl.twrp.me/noblelte/ using Odin
2- Use Twrp to flash @dr.ketan custom SuperSU script https://forum.xda-developers.com/galaxy-s6/general/root-s6-nougat-supersu-t3570740
sympathy said:
As @Ijaz Farooq answered here :
1- Twrp https://dl.twrp.me/noblelte/ using Odin
2- Use Twrp to flash @dr.ketan custom SuperSU script https://forum.xda-developers.com/galaxy-s6/general/root-s6-nougat-supersu-t3570740
Click to expand...
Click to collapse
Thanks my friend
SM-N920C cihazımdan gönderildi
Atila35 said:
Thanks my friend
SM-N920C cihazımdan gönderildi
Click to expand...
Click to collapse
does it works guys have you tried it??
sympathy said:
As @Ijaz Farooq answered here :
1- Twrp https://dl.twrp.me/noblelte/ using Odin
2- Use Twrp to flash @dr.ketan custom SuperSU script https://forum.xda-developers.com/galaxy-s6/general/root-s6-nougat-supersu-t3570740
Click to expand...
Click to collapse
I tried and work 100%.
Note 5 SM-N920C
1) I download Twrp from https://dl.twrp.me/noblelte/twrp-3.1.0-0-noblelte.img.tar.html
2) Use Twrp to flash @dr.ketan custom SuperSU script https://forum.xda-developers.com/gal...persu-t3570740 (I download the attachment). and copy it to your phone to install it later.
3) I download Odin3 and open it
4) power off the phone -> then press and hold volume down, home and power button.
5) I plug the phone to PC then a blue icon will appear in the Odin that means is connected.
6) I click AP and I choose Twrp that I downloaded in 1.
7) the phone will restart and if not boot you have to click and hold (up and down volume button, menu, and power button) until the phone shutdown then clicks and hold up volume, home, and power button. twrp will start and select something by sliding to left then click install. and choose the zip file that downloaded in 2 then reboot the device and will root and work inshallah.
mtref said:
I tried and work 100%.
Note 5 SM-N920C
1) I download Twrp from https://dl.twrp.me/noblelte/twrp-3.1.0-0-noblelte.img.tar.html
2) Use Twrp to flash @dr.ketan custom SuperSU script https://forum.xda-developers.com/gal...persu-t3570740 (I download the attachment). and copy it to your phone to install it later.
3) I download Odin3 and open it
4) power off the phone -> then press and hold volume down, home and power button.
5) I plug the phone to PC then a blue icon will appear in the Odin that means is connected.
6) I click AP and I choose Twrp that I downloaded in 1.
7) the phone will restart and if not boot you have to click and hold (up and down volume button, menu, and power button) until the phone shutdown then clicks and hold up volume, home, and power button. twrp will start and select something by sliding to left then click install. and choose the zip file that downloaded in 2 then reboot the device and will root and work inshallah.
Click to expand...
Click to collapse
Does this method reset the phone? I mean all user data and apks are wiped out?
I flashed twrp 3 times but no luck, anyone having same issue? I still get normal recovery mode and no twrp.
P.S I got pass on all 3 times.
sunny1119 said:
I flashed twrp 3 times but no luck, anyone having same issue? I still get normal recovery mode and no twrp.
P.S I got pass on all 3 times.
Click to expand...
Click to collapse
1. The only option ticked in Odin should be F. Reset Time - NO "Restart"!!!!!
2. Flash with no automatic reboot.
3. Without rebooting the device after flashing TWRP (!!!!), you have to boot into TWRP recovery in a special way (!!!!).
To do this, press and hold Volume Down + Home + Power key on your device,
as soon as the screen goes black, immediately switch the key from Volume Down to Volume Up
while having the Power + Home Key pressed.
This will take you to the TWRP recovery.
It worked for me
Then afterwards you always get to TWRP.
Could this method Work on a Sprint Note5? I dont feel very confident to downgradr to Marshmallow.
Jack_Surfer said:
1. The only option ticked in Odin should be F. Reset Time - NO "Restart"!!!!!
2. Flash with no automatic reboot.
3. Without rebooting the device after flashing TWRP (!!!!), you have to boot into TWRP recovery in a special way (!!!!).
To do this, press and hold Volume Down + Home + Power key on your device,
as soon as the screen goes black, immediately switch the key from Volume Down to Volume Up
while having the Power + Home Key pressed.
This will take you to the TWRP recovery.
It worked for me
Then afterwards you always get to TWRP.
Click to expand...
Click to collapse
Thanks that worked
sunny1119 said:
Thanks that worked
Click to expand...
Click to collapse
Good
I was released too when it worked for me.
cachanilla86 said:
Could this method Work on a Sprint Note5? I dont feel very confident to downgradr to Marshmallow.
Click to expand...
Click to collapse
It should work. From my understanding SuperSU is the same for all devices. It's just TWRP that is device specific. I'm going to use this method to root my SM-N920P tomorrow.
Wipe or Not
sunny1119 said:
Thanks that worked
Click to expand...
Click to collapse
After this method, is the device wiped or not?
Do we have to reinstall all apks and user data?
Hi,
the method is ok. But I can not get write access to system directory .
Any advice?
Wysłane z mojego SM-N9208 przy użyciu Tapatalka
tested and worked %100.
tugkaninan said:
After this method, is the device wiped or not?
Do we have to reinstall all apks and user data?
Click to expand...
Click to collapse
No wipe will happen.
boz_1903 said:
does it works guys have you tried it??
Click to expand...
Click to collapse
Tried it on N9208, it works
:good:
Download PGP Signature twrp-3.1.0-0-noblelte.img.tar.asc : What is this file ? Do I have to flash this first before the TWRP file ?
I had failed my flashing of the TWRP as after that in download mode I saw this : FAB lock is on ??
mobile88 said:
Download PGP Signature twrp-3.1.0-0-noblelte.img.tar.asc : What is this file ? Do I have to flash this first before the TWRP file ?
I had failed my flashing of the TWRP as after that in download mode I saw this : FAB lock is on ??
Click to expand...
Click to collapse
Fist of all make sure you have enabled OEM bootloader unlock in developer options, if its not enabled it will always give you fail on Odin. After its enabled just download twrp flash image from 1st post and flash it, the img file should be in .tar format not the asc one. Also make sure to untick Auto-reboot option in Odin.
is it same method MM
I have a Verizon Tab S2 sm-t817v. I have successfully flash TWRP to it via Odin probably 20 times. Problem is i have a sticky vol up key. So when the tablet reboots it doesn't detect the keypress, it either reboots normally, or if im unlucky it boots to the 4 option recovery and erases my tablet. Is there anyway to reboot straight to bootloader to allow TWRP to install, perhaps using ADB?
Admins/Moderator move this post if its in the wrong place. Thanks.
adb reboot bootloader