Custom TWRP (TeamWin Recovery Project) Builds for Samsung Galaxy Note 4
Disclaimer:
Code:
/*
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Fork of TWRP:
This UNOFFICIAL TWRP recovery is built for Samsung Galaxy Note 4 Snapdragon variants in EmotionOS/LineageOS Android 7.1.1 Nougat tree with correct device-specific SELinux policy. It fixed some warnings/errors and differs from the OFFICIAL TWRP in the following ways:
Designed to be built with LineageOS 14.1 only
Customize the mksh prompt and environment by editing mksh/mkshrc
Require fstab v2 syntax
Use external repositories for pigz, exfat, fuse
Power key toggles screen on/off
SuperSU and HTC Dumlock have been removed
Other customizations (see change history)
You can get the OFFICIAL TWRP recovery for Verizon Samsung Galaxy Note 4 (SM-N910V) from here. Other devices can find their variants in the device-specific forums.
Click to expand...
Click to collapse
Versioning:
To help distinguish builds of recovery made from this fork, the minor version digit is replaced with N#. Minor version increments will be handled as needed, independent of TWRP. The major and semi-major version digits follow upstream to roughly indicate feature parity (as close as possible with a fork, anyways).
Click to expand...
Click to collapse
Downloads:
Custom TWRP Builds for Samsung Galaxy Note 4
Click to expand...
Click to collapse
XDA:DevDB Information
TWRP, ROM for the Verizon Samsung Galaxy Note 4
Contributors
hsbadr
Source Code: https://github.com/mdmower/twrp
ROM OS Version: 7.x Nougat
Version Information
Status: Stable
Current Stable Version: 3.0.N1-20170205
Stable Release Date: 2017-02-05
Created 2017-02-05
Last Updated 2017-02-05
Reserved
Reserved
Is this twrp required or recommended for your Emo-14.1 builds?
I've found a little bug.
When flashing (there were 3 files added to flash) I turned off the screen using the power button.
After that pressing back the power button vibrated but remained with the screen off, touching the screen had the same effect.
I just waited and turned the phone off.
Next time I flashed the same things without press the power button to turn off the screen and worked fine, even though the screen went off automatically.
razholio said:
Is this twrp required or recommended for your Emo-14.1 builds?
Click to expand...
Click to collapse
Curious about this myself.. and will it affect going back to other ROMs?
how is this different from the TWRP 3.0.2 I am running now on my device? or is this ONLY to flash nougat ROMS?
Delete
TWRP themes dont seem to work with this.
so how exactly would you flash the tar?
6th_Hokage said:
so how exactly would you flash the tar?
Click to expand...
Click to collapse
.tar files are flashed in Odin. You can download the.img custom recovery and flash it in official TWRPapp from the link above
Sent from my Samsung SM-N910G using XDA Labs
Did anyone find the answer to the question whether this had to be used, or just recommended? Also can you use that same recovery to flash other roms?
scottsdca said:
Did anyone find the answer to the question whether this had to be used, or just recommended? Also can you use that same recovery to flash other roms?
Click to expand...
Click to collapse
Well I can confirm official twrp still works for 2/5 and 2/13 ROMs.
Every time I try to install emotionrom it never recognizes my sim, so I'm not sure if it's because I'm not using the right twrp.
Hi, does this comment "* Require fstab v2 syntax" mean we may have issues flashing Roms that are not LineageOS or EmotionOS? (ie touchwiz)
Sent from my SM-N9200 using Tapatalk
IndyRoadie said:
Curious about this myself.. and will it affect going back to other ROMs?
Click to expand...
Click to collapse
happy2472 said:
how is this different from the TWRP 3.0.2 I am running now on my device? or is this ONLY to flash nougat ROMS?
Click to expand...
Click to collapse
scottsdca said:
Did anyone find the answer to the question whether this had to be used, or just recommended? Also can you use that same recovery to flash other roms?
Click to expand...
Click to collapse
fastguy said:
Hi, does this comment "* Require fstab v2 syntax" mean we may have issues flashing Roms that are not LineageOS or EmotionOS? (ie touchwiz)
Sent from my SM-N9200 using Tapatalk
Click to expand...
Click to collapse
Inquiring minds want to know
IndyRoadie said:
Inquiring minds want to know
Click to expand...
Click to collapse
Same questions here
Stuck in a bootloop on 910T...can't even boot into system.
TWRP issue on 910F
I've hit a bug with VERSION twrp-3.0.N1-20170205-UNOFFICIAL-trltexx.tar. Every time I flush with this recovery i get an encryption failed error. I've had to revert back to twrp-3.0.2-0-treltexx in order to flush my ROMs. Hope this helps someone out there.
I successfully loaded LineageOS 14.1 (Android 7.1.1) using a standard TWRP build (found on their Devices page) - I never knew about this build.
Related
Code:
#include <std_disclaimer.h>
/*
[COLOR="Red"]* Your warranty is now void.[/COLOR]
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
About
Lin·e·age
/ˈlinēij/
noun
lineal descent from an ancestor; ancestry or pedigree.
a sequence of species each of which is considered to have evolved from its predecessor.
some words of wisdom:
WIP
Latest features :
XDA:DevDB Information
LineageOS 14.1 for Falcon (WEEKLY), ROM for the Moto G
Contributors
matmutant, luca020400, LuK1337, Google, LineageOS Team, Motorola
Source Code: https://github.com/lineageos
ROM OS Version: 7.x Nougat
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2017-01-26
Last Updated 2017-02-01
Download & Install
LINKs:
All Downloads
Nightly Changelog
OpenGapps choose ARM>7.1>micro/nano/pico (micro might still be too big... unless you use the custom install options that allows you not to install everything from the package)
Either way, you might want to further customize your installation (both gapps and system apps), refer to this tutorial
REMEMBER:
ONLY use TWRP 3.0.2-1 or up
/!\ Before installing, read post #3. /!\
HOW TO INSTALL
Requirements: Unlocked Bootloader, a Nougat compatible Custom Recovery and the Downloaded Zips.
NB: as with CM14.1, with a Lollipop compatible recovery like TWRP 3.0.2-0, you will get stuck to recovery, It is MANDATORY to update to 3.0.2-1.; the following error is still present : E:unknown command [log] but will not prevent install.
Place the rom and other like Gapps on the internal Storage or on a USB OTG
Reboot to recovery using the hotkey ( PowerOff+Vol- => With Vol- Go to Recovery => Select the recovery option with Vol+ )
Do Wipes (Data, Cache, Dalvik and System partitions) if you are in a different ROM.
Select the Zips
Swipe to install (if using TWRP)
Reboot and wait 2-3 min
HOW TO DIRTY UPDATE
Same as above, without the need of wiping of reflashing gapps.
HOW TO COME FROM CM13/14?
The Best practice way is to follow the clean install way.
BUT it is also possible to update from CM13/14 using an EXPERIMENTAL data migration build.
Here are the Official recommendations :
This build will allow you to ‘upgrade’ from CM to the signed LineageOS weekly
This build may wipe permissions (you’ll have to re-allow app permissions), but should retain all user data
This build will be watermarked with an ugly banner to ensure that you don’t permanently run this EXPERIMENTAL release, and upgrade to a normal weekly after.
The process for this installation will be as follows:
Install EXPERIMENTAL migration build on top of cm-13.0 or cm-14.1 build (don’t try to install LineageOS 13.0 on top of CM 14.1, that will not work).
Reboot
Install LineageOS weekly build
Reboot
Re-setup your application permissions
Given the EXPERIMENTAL nature of this process, we are going to remove this option in two months time.
Click to expand...
Click to collapse
As Always, DO A TWRP BACKUP before trashing your device!
Notes, Bugs, and miscellaneous.
Tips and notes:
When choosing a Gapps package ensure it can fit into /system when flashed.
Nano gapps package is recommended as it fits and provides everything in a base package you will need for gapps support. Then, you can install the other google apps from the store later on if needed.
Remember nightly builds are experimental: they can and will be broken from time to time. Always have a backup at hand.
To transfer files from/to PC when plugged in you will get the charging mode prompt status in the status bar, then click it to change from charging mode to transfer files.
Considering the quite low amount of Falcon users left over here, I'm not sure about making a full-sized FAQ;
For now, the following will take that purpose:
[SIZE=+1]Q1: Question?[/SIZE]answer [SIZE=+1]Q2: How to get Root?[/SIZE]
go to : https://download.lineageos.org/extras
and choose "su (arm)" download.
It's been a long journey since I brought this device... Thank you so much Dev for supporting my 4 years old device... Downloading... LineageOS for falcon... Fingers crossed...
Long live falcon!
Great job!
Question, is there a list of what is working and not working on this rom as far as of hardware?
Thanks
Finally... Officially Supported.
thanks man.
Long live falcon and God bless the developers.
Sent from my Moto G using Tapatalk
theplagueisback said:
Question, is there a list of what is working and not working on this rom as far as of hardware?
Thanks
Click to expand...
Click to collapse
Basically, what worked on CM14.1 works on Lineage on this device, I didn't thoroughly tested it, but I didn't encounter much regressions after the migration (I performed the "Experimental" migration, to be in worse case scenario)
long live my (g)old device
ROM installed, so far so good, device performs as good as a brand new kick ass phone.
Keep up the good work!
Clean installed, seems to be good...
Someone tried if it works Xposed?
seba2907 said:
Someone tried if it works Xposed?
Click to expand...
Click to collapse
:facepalm:
seba2907 said:
Someone tried if it works Xposed?
Click to expand...
Click to collapse
Xposed is not yet available for nougat.
abeloman said:
:facepalm:
Click to expand...
Click to collapse
Sorry for not being at your senior level
BryanByteZ said:
Xposed is not yet available for nougat.
Click to expand...
Click to collapse
Thanks for your answer, I'm in cm13 and i thought it already worked for nougat
seba2907 said:
Sorry for not being at your senior level
Thanks for your answer, I'm in cm13 and i thought it already worked for nougat
Click to expand...
Click to collapse
I'm preying for that its the only thing that hold me on MM.
My 5X is dead. It's time to revive my g1
noice. falcon ftw!
MIUI 8 for Samsung SM-G9350 Based on Stock Sammy and MIUI 8 Patchrom for M
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This ROM is built by the Chinese developer @nian0114(xda name:jing95916).
Please take note that although this ROM is based on Sammy, you will get a MIUI experience instead of an AOSP one.
This ROM is approved by MIUI officials and hosted by LittleRabbit Server. Although it is not directly maintained by Xiaomi, you can still treat this as some official ROM.
About MIUI
http://en.miui.com/
Features
Of course, all amazing MIUI features.
Rooted (Go to Security --- Permission to enable and manage.)
Video
https://www.youtube.com/watch?v=c-jvZb1DoHo
How to install
TWRP Recovery is recommended.
Wipe Data/Cache
Flash the zip file downloaded.
Downloads
MIUI 8 Builds(SAM)
Click Me
Known Issues
[*]Only SIM1 can use data connection
[*]After fingerprint done,no tip,you need to press back yourself(no vibration means done)
[*]com.media.provider will fc when first boot
Others works?
FAQs
1. Custom kernels?
Not for this ROM...
2. Modifications to the ROM?
Please contact me first before you do ANY modifications to the ROM. I will never say no if you ask.
Sources
MIUI Patchrom: http://github.com/MiCode
My Sources: http://github.com/nian0114
If you like this ROM, please click the "Thanks" button. We will also appreciate a lot if you connect to the Internet at least once after flashing for statistical purposes.
About donations
If you would like to sponsor my college education a little, go for it and thank you! If you don't want to donate, it is perfectly fine for me. Just feel free to flash all my ROMs. I don't do this for money
XDA:DevDB Information
MIUI8 Smooth For SM-G9350, ROM for the Samsung Galaxy S7 Edge
Contributors
jing95916
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 6.0
Based On: Sammy
Version Information
Status: Beta
Created 2017-03-20
Last Updated 2017-03-20
I have a custom kernel for this rom Grown is using. Also I can fix up the dual sim part thats very very simple. Contact me if you are interested dev.
I can not find MIUI for G9350. Can you please link your source directly to your Git tree.
travis82 said:
I have a custom kernel for this rom Grown is using. Also I can fix up the dual sim part thats very very simple. Contact me if you are interested dev.
I can not find MIUI for G9350. Can you please link your source directly to your Git tree.
Click to expand...
Click to collapse
Hi，when will we can use your ROM (lineages and cm for g
9350)?
for-ever, 感谢你的邀请.
LineageOS 需要更多的工作才能向公众开放.
AFH Mirror: https://www.androidfilehost.com/?fid=529152257862713210
travis82 said:
I have a custom kernel for this rom Grown is using. Also I can fix up the dual sim part thats very very simple. Contact me if you are interested dev.
I can not find MIUI for G9350. Can you please link your source directly to your Git tree.
Click to expand...
Click to collapse
i fixed it in 7.3.31 and dual sim audio works well in that version.Do you have any solution about the second sim data connection?
Grown?Can his MIUI boot?All rom made by him can't boot,can it?
and no public git for miui8 on G9300/50.
if you want to try miui,https://www.ttotoo.com/download-31.html.here and free version
Download Link
Hey
i try many time to install the Rom but i face error in the end like source busy , if you have fresh download link please give it to me to try it again
Thanks
will this work for locked bootloader at&t s7 edge? can I do it with flashfire instead of twrp?
Need Help
Hey ,
I got an error message when i install the Rom on my device (the password you entered is correct , but unfortunately your data is corrupt ) and in the end there is reset phone when i click reset the message comes again and again <
do anyone has any solution to fix this issue
destroyer557 said:
will this work for locked bootloader at&t s7 edge? can I do it with flashfire instead of twrp?
Click to expand...
Click to collapse
To my knowledge the AT&T s7 edge has a locked bootloader as of know it can only be rooted. So no it won't load unless someone has figured out how to get twrp on our variant.
Barclays UK App
Hey guys,
I know this rom is rooted, but has anyone been able to get UK Barclays App to work?
Thanks!
I can't intall this rom
I get and error "mount: mount /dev...." In the. Recovery I download the last version but I can't install it.
Any way to make it work on the sprint variant?
Thank you very much for sharing this rom support installation x posed? can you do an integrated x posed package miui is difficult to install XP
may this work on tmobil?
Sent from my SM-G935F using XDA-Developers Legacy app
kachhh said:
may this work on tmobil?
Click to expand...
Click to collapse
Will not work on any carrier models.
rippedwarrior69 said:
Will not work on any carrier models.
Click to expand...
Click to collapse
I have a Verizon SM-G935V but I successfully flashed into Global Us version SM-G935U. Does this rom works on it?
No Carrier have locked bootloader.
rippedwarrior69 said:
Will not work on any carrier models.
Click to expand...
Click to collapse
rippedwarrior69 said:
No Carrier have locked bootloader.
Click to expand...
Click to collapse
correct... but we do have the developer kernel allowing us to write to /system...
i think with a few tweaks we may be able to...
kevp75 said:
correct... but we do have the developer kernel allowing us to write to /system...
i think with a few tweaks we may be able to...
Click to expand...
Click to collapse
I hope so I'm moved to the note 8.
I'll give it a shot over the weekend.
---------- Post added at 12:13 PM ---------- Previous post was at 12:11 PM ----------
kevp75 said:
I'll give it a shot over the weekend.
Click to expand...
Click to collapse
Eh, download link is all Chinese characters, and is only Marshmallow.
Looks like I won't be doing it after all
(I won't downgrade from Nougat)
LineageOS 13.0 for Samsung Galaxy A700FD
Code:
/*
* Your warranty is now void.
* The ROM is under developement and have some bugs.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, I will laugh at you.
* By flashing this ROM, you accept this disclaimer.
*/
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Warning : This LineageOs 13.0 is only for A700FD Variant. DO NOT INSTALL ON ANY OTHER VARIANT!
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Firmware LineageOS 13.0 Android 6.0.1. Based on the drivers with the latest stock firmware A700FDXXU1CQC3.
Kernel in enforcing mode, compatible with SafetyNet test and AndroidPay.
Status: stable.
Date 2017-10-21
Download latest version
Instalation
For update:
1. Install firmware by TWRP without wipes
For the first installation:
1. It is highly recommended to switch to firmware from the last stock for Russia (A700FDXXU1CQC3 or A700FDXXS1CPK1)
2. Use TWRP
3. Make Wipe data / Factory Reset from TWRP (Wipe -> Advanced Wipe. make selection Dalvik Cache, System, Cache, Data)
4. Install firmware by TWRP
6. Install Gapps for version Arm, 6.0.1 if needed
7. For Root flash SuperSu, or root addon for developer menu addonsu-arm-signed.zip
8. Can use ViperFx without root. Install By TWRP.
Bugs:
Tell me
Thanks:
jackeagle for TWRP and CM-13.0
4pda-forum users retvain, M0nt, Vadoha153 for test firmware.
Changelogs:
Build 6 (2017-10-21)
Fix crash at latest update Nova Launcher.
Build 5 (2017-10-13)
Improved GPS performance. Support for A-GPS. More satellites, faster and more accurate determination of coordinates.
Can use ViperFx without root. Install By TWRP.
Build 4 (2017-05-270
The kernel is switched to enforcing mode, with the possibility of switching to a permissive.
Positive verify in SafetyNet testing.
Can use AndroidPay.
Build 3 (2017-04-30)
FM-Radio.
Fixed a bug with non-working bottom buttons.
Working mode in gloves.
Fixes in camera settings (ISO).
Significantly reduced power consumption. Doze is activated.
Wi-Fi Direct.
LiveDisplay.
Build 2 (2017-04-19)
Update drivers from latest stock
Reduced power consumption
Build 1 (2017-04-03)
Initial version
Cool! Is it possible to port this to A510FD (Galaxy A5 2016) since the specs of A7 and A5 are the same ?
XenRon said:
Cool! Is it possible to port this to A510FD (Galaxy A5 2016) since the specs of A7 and A5 are the same ?
Click to expand...
Click to collapse
No, this rom to Galaxy A7 2015 (A700FD).
Thanxxx for this awesome rom..but can you plz add indian csc so we can use volte ..is it possible???
The new build is indeed good on battery consumption. Impressive sir !
On way to work, will check out the FM too and report later today.
Update:
After a day or two, the phone has settled and there is no heating up. Loved the new Camera app, is much better than the previous. The ROM us becoming more stable now @SergeySDK. Am happy with your work.
The Moto FM Radio is getting stuck for me and caused a phone reboot too.
The ROM can be used as a daily driver now. And we can hope only good things now from Lineage 14 whenever it comes. :good:
Any other link to download this rom?
Sent from my SM-C7000 using Tapatalk
SergeySDK said:
No, this rom to Galaxy A7 2015 (A700FD).
Click to expand...
Click to collapse
Hi Sergey,
I have a A700FQ. Is it compatible with my device?
BZC said:
Hi Sergey,
I have a A700FQ. Is it compatible with my device?
Click to expand...
Click to collapse
No, in your phone has a different processor (Exynos), my rom for Qualcomm Snapdragon 615.
SergeySDK said:
No, in your phone has a different processor (Exynos), my rom for Qualcomm Snapdragon 615.
Click to expand...
Click to collapse
ok, thank you for the information.
Hi Sergey,
I have a A700H. Is it compatible with my device?
kunkun_212 said:
Hi Sergey,
I have a A700H. Is it compatible with my device?
Click to expand...
Click to collapse
I do not know, the specifications of the phones A700FD and A700H look similar, but I do not have a phone to check. You can check, but do not forget to make a backup.
Hello ,can the Chinese version of this phone use it(sm
-a7000)?
speaker not working
In latest update of 30/4/2017 back speaker is not working please send the solution asap
CryptoRishabh said:
In latest update of 30/4/2017 back speaker is not working please send the solution asap
Click to expand...
Click to collapse
Did you install the firmware according to the instructions?
First install the firmware A700FDXXU1CQC3 by odin, after doing a full wipe in TWRP (Wipe -> Advanced Wipe. make selection Dalvik Cache, System, Cache, Data)
SergeySDK said:
I do not know, the specifications of the phones A700FD and A700H look similar, but I do not have a phone to check. You can check, but do not forget to make a backup.
Click to expand...
Click to collapse
I tried install but this is my result
Could not detect filesystem for dev/block/bootdevice/by-name/system at /system: No such file or directory
unmount of /system failed; no such volume
Can't install this package on top of incompatible data.
please try another package or run a factory reset
Error excuting updater binary in zip '/external_sd/lineage-13.0-20170430-UNOFFICIAL-a7lte.zip'
Error flasing....
plz help me
kunkun_212 said:
I tried install but this is my result
Could not detect filesystem for dev/block/bootdevice/by-name/system at /system: No such file or directory
unmount of /system failed; no such volume
Can't install this package on top of incompatible data.
please try another package or run a factory reset
Error excuting updater binary in zip '/external_sd/lineage-13.0-20170430-UNOFFICIAL-a7lte.zip'
Error flasing....
plz help me
Click to expand...
Click to collapse
Go to PM...
Any plan on changing cm theme engine to substratum theme engine?
Sent from my SM-N920C using Tapatalk
Hi Guys,
So I recently got my hands on the A7 and was happy to see Lineage OS is available for the phone.
Managed to flash the ROM over the weekend, I must say it is running really well. very smooth! No issues to report as a daily driver.
But I did run into some issues with superuser but managed to resolve. My only other problem is TWRP, for some reason if I boot into recovery I can't get back into the ROM, I am stuck in bootloop recovery. The only way to fix is to reflash TRWP using ODIN over and over again, hopefully someone can shed some light on this matter.
Anyway, looking forward to future updates and hopefully LineageOS 14...
san_099 said:
Hi Guys,
So I recently got my hands on the A7 and was happy to see Lineage OS is available for the phone.
Managed to flash the ROM over the weekend, I must say it is running really well. very smooth! No issues to report as a daily driver.
But I did run into some issues with superuser but managed to resolve. My only other problem is TWRP, for some reason if I boot into recovery I can't get back into the ROM, I am stuck in bootloop recovery. The only way to fix is to reflash TRWP using ODIN over and over again, hopefully someone can shed some light on this matter.
Anyway, looking forward to future updates and hopefully LineageOS 14...
Click to expand...
Click to collapse
You use TWRP v3.0.2.0 (Build 4) from link from first post in thread? With this version there were no problems.
LineageOS is a free, community built, aftermarket firmware distribution of Android 8.1 (Oreo), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
This is an unofficial LineageOS 15.1 build for the international Galaxy S4 LTE-A (GT-I9506).
The korean Galaxy S4 LTE-A (SHV-E330S/K/L) is NOT tested by the developer and it may have some issues such as wakeup delay.
Instructions
Flash TWRP recovery via Odin.
Boot to TWRP recovery (Vol UP + Home + Power).
Optional: Wipe data / Factory Reset
Install the ROM (Lineage zip).
Optional: Install LineageOS su addon or Magisk to get root.
Install the Google Apps (Open GApps 8.1).
Enjoy!
Downloads
All: https://www.androidfilehost.com/?w=files&flid=43918
LineageOS 15.1: lineage-15.1-20181007-UNOFFICIAL-ks01ltexx.zip
TWRP: twrp-3.2.3-0-ks01ltexx.tar
Recommended Bootloader/Modem: I9506XXSDPL2_I9506XXUDOJ2_bootmodem.tar
Sources
https://github.com/kyasu/android_kernel_samsung_msm8974
https://github.com/kyasu/android_device_samsung_ks01ltexx
https://github.com/kyasu/android_vendor_samsung_ks01ltexx
XDA:DevDB Information
[ROM][GT-I9506][ks01ltexx] LineageOS 15.1 UNOFFICIAL for the Galaxy S4 LTE-A, ROM for the Samsung Galaxy S4
Contributors
kyasu
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.4.x
Based On: LineageOS
Version Information
Status: Stable
Created 2018-02-11
Last Updated 2018-10-07
Reserved
Hi, can you normally use your current state every day?
pawpawel said:
Hi, can you normally use your current state every day?
Click to expand...
Click to collapse
Been using the previous version as a daily driver already.
So I would say, yes.
Very nice ROM for our device.
Is the Bluetooth voice call issue fixed?.
Edit _> confirmed fixed !. Awesome Kyasu, thanks.
Dirty Flashing from 14.1 did not work for me. Device boots completely but hangs after 20s of usage. Maybe there is an incompatible app, thats making my device crash. I'll try it from scratch in some days again. But thank you for all your work!
This will be my daily driver from today on. Thanks so much kyasu! Switching on and off Bluetooth and WiFi seems to interfere somehow, but everything else seems to work fine for the moment!
Did you consider posting a donation link @kyasu ?
Thanks for the continuing support for the S4!
Somehow the recommended gapps (as of 12.02.18) don't work for me. Instead i used the more recent one: https://forum.xda-developers.com/android/apps-games/arm-unofficial-opengapps-builds-android-t3743495
I hope i can help someone. BTW: klick on download anyway if it shows an error messege on the download-page.
Can't wait for a stable version of this amazing rom!
Sent from my ks01lte using XDA Labs
yassirx95 said:
Can't wait for a stable version of this amazing rom!
Sent from my ks01lte using XDA Labs
Click to expand...
Click to collapse
The ROM in it's current condition is already very stable.
Been using it since the first release and no stability issues for me.
Big bug for me. If you set screen lock as pattern or pin you can't unlock phone because SystemUI crashes so I can't add Credit Card to Android Pay.
EDIT: OK work but there is some delay. If the process interrupted you don't able to unlock screen. To fix this you must Reboot to Recovery and go to Advanced-->File Manager. Navigate to /data/system and delete all locksettings databases.
marcinadd said:
Big bug for me. If you set screen lock as pattern or pin you can't unlock phone because SystemUI crashes so I can't add Credit Card to Android Pay.
Camera LED doesn't work too.
Click to expand...
Click to collapse
Pin works fine here. Also led flash is working fine for me with footej camera app. Switching flight mode off from power menu does not work, but there is also the quick settings tile for this, so nothing to worry about. This is very stable and some features work even better than with los14.1 (torch tile, switching cameras delay...).
One more thing: Switching selinux to enforcing works also for me, so no problem using Netflix and other apps, which depend on this.
kyasu said:
This is an unofficial LineageOS 15.1 build for the international Galaxy S4 LTE-A (GT-I9506).
The korean Galaxy S4 LTE-A (SHV-E330S/K/L) is NOT tested by the developer and it may have some issues such as wakeup delay.
Click to expand...
Click to collapse
I don't think the wakeup delay problem is specific to the Korean version. I'm experiencing this bug on an international Galaxy S4 LTE-A. On stock the keys light up right away and the screen immediately after. On your roms the keys light up immediately, but the screen takes about a second to wake up.
Thanks for all your work, nonetheless. This is a great ROM, thanks for keeping ks01lte alive.
PixelChris95 said:
Pin works fine here.
Click to expand...
Click to collapse
When I try to set pin settings froze. I rebooted phone and tried to unlock, but it's relocking continously. You only set PIN from settings and it worked?
marcinadd said:
When I try to set pin settings froze. I rebooted phone and tried to unlock, but it's relocking continously. You only set PIN from settings and it worked?
Click to expand...
Click to collapse
Yes I did nothing special. I just changed to a pattern, unlocked once and changed back to my pin. No problems whatsoever.
I have the wakeup delay too with the international version, but I am already used to it since 14.1
PixelChris95 said:
Yes I did nothing special. I just changed to a pattern, unlocked once and changed back to my pin. No problems whatsoever.
I have the wakeup delay too with the international version, but I am already used to it since 14.1
Click to expand...
Click to collapse
Do you use ext4 or f2fs on data partition? Maybe I have this bug because I use f2fs and Magisk.
marcinadd said:
Do you use ext4 or f2fs on data partition? Maybe I have this bug because I use f2fs and Magisk.
Click to expand...
Click to collapse
I use f2fs for data and cache partition. I would just clean flash again. Which gapps did you use? I used this (pico version): https://forum.xda-developers.com/android/apps-games/arm-unofficial-opengapps-builds-android-t3743495
PixelChris95 said:
I use f2fs for data and cache partition. I would just clean flash again. Which gapps did you use? I used this (pico version): https://forum.xda-developers.com/android/apps-games/arm-unofficial-opengapps-builds-android-t3743495
Click to expand...
Click to collapse
Same GApps as mine but I also use Magisk. Maybe this is a issue.
marcinadd said:
Same GApps as mine but I also use Magisk. Maybe this is a issue.
Click to expand...
Click to collapse
I use Magisk as well
Setting screen lock works, but it takes longer than normal.
LineageOS is a free, community built, aftermarket firmware distribution of Android 8.1 (Oreo), which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void. Knox 0x1.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
WARNING:
If you find any bugs, bring a logcat. Logs are helpful....
If your problem cannot be reproduced without using Root modules or Xposed, don't report it! The same goes with custom kernels.
Not working:
Camera or Video recording
Encryption not working in TWRP
Data
Prerequisites:
The latest version of TWRP. This is an absolute requirement.
Your device (it better be a Galaxy Tab 3 7.0 (Sprint)).
How to flash this ROM:
So you really want to do this, huh? That must mean you accept the risks specified in the disclaimer, and that you read the warning.
From other custom ROMs (this assumes you already unlocked your bootloader a long time ago):
Download the zip file for your device (link is below).
Reboot into TWRP (Volume Up + Home + Power or Advanced Restart).
Make a backup (optional).
Perform a factory reset (Wipe > Swipe to Factory Reset).
Flash the ROM you just downloaded.
Flash OpenGApps for Android 8.1 if you want Google services (optional).
If you want root, flash Magisk or SuperSU
Reboot and proceed normally with installation.
Download links:
TWRP:https://drive.google.com/open?id=1SobBqwJ4blOBUwJRQhRbSngqli-GQOd4
Rom: https://drive.google.com/open?id=1-KmqmWPjX1CcS31llPttYkJkG61uY7zC
OpenGApps 8.1: https://drive.google.com/open?id=1te8P364JcVnlItY-r74a8CbkP4jAj85Q
Source code:
LineageOS on GitHub
Credits:
The LineageOS Team
TeamWIn
Special Thanks: @DarkFrenzy @captainthrowback @Dees_Troy @noahajac @LuK1337
Anyone i forgot to mention
Very Special Thanks: @arco as alot of my changes are based upon his Github upstream changes on serranoltexx, expecially on RIL. Without this project would not be possible.
Version Information:
ROM OS Version: Android 8.1 Oreo
Kernel Version: Linux 3.4.x
Sent from my SM-T217S using Tapatalk
IThinkALot said:
Android Oreo on a 5 year old device? You're awesome dude.
Sent from my Xiaomi Redmi Note 4 using XDA Labs
Click to expand...
Click to collapse
Thanks. Haha it wasn't a easy task. Took me about 2 months of tinkering and playing with it. I am personally using the device at the moment.
Sent from my SM-T217S using Tapatalk
slashez said:
That’s so impressive. I don’t want to sound unappreciative but can you please do it for the tab 3 8.0. [emoji1391]*[emoji1391]*[emoji1391]*[emoji1391]*
Click to expand...
Click to collapse
Thanks. Problem with that is I don't have the device on hand, so that's problematic in building and testing.
Sent from my SM-T217S using Tapatalk
sscsps said:
Wow dude! Awesome work!
---------- Post added at 08:40 AM ---------- Previous post was at 08:40 AM ----------
When will you be sharing your trees?
Click to expand...
Click to collapse
Thanks. Ya I was going to try to get the camera working before I dropped my self made trees.
majorkid said:
Thanks for the ROM ..
Click to expand...
Click to collapse
Welcome
The0919 said:
Can I flash this on my T210R Tab 3?
Click to expand...
Click to collapse
Different hardware
wtjra70 said:
You sir has restored my love in this little bugger the SM-217S. I found it a couple of months back hiding in a drawer. I figured I'd use it when I'm watching YouTube in bed. I've been on Resurrection Remix 7.1 and could believe it was so slow. Now this thing is has new life in it again.
Click to expand...
Click to collapse
Welcome.
Robsr said:
since i.m no technician or a computer whizkid i.ve to look up on these kind of threads for a good rom
so i dare asking you if you are willing to make a rom for a Samsung Tab 3 lite SM-T110. My wife uses this and its very, very slow on the stock rom.
thnx a lot
rob
out of the Hague Netherlands.
Click to expand...
Click to collapse
Problem is different hardware. And I don't have that tab on hand to debug issues.
Sent from my SM-T217S using Tapatalk
Thank you for cooking this ROM and interest in making the camera work. I know you use it as WiFi tablet only. I still can't get Sprint data working as was the case with earlier serranoltexx-based builds.
Looking forward to any updates you may provide. Best wishes...
Version Information:
ROM OS Version: Android 8.1 Oreo
Kernel Version: Linux 3.4.x
Click to expand...
Click to collapse
residentorca said:
Thank you for cooking this ROM and interest in making the camera work. I know you use it as WiFi tablet only. I still can't get Sprint data working as was the case with earlier serranoltexx-based builds.
Looking forward to any updates you may provide. Best wishes...
Click to expand...
Click to collapse
Can you take some logs when you insert your sim, and try to toggle data?
lazumo said:
I'm guessing a kernel for Lineage OS 15.1 wouldn't work with Lineage OS 14.1 ? I'm not ready to make the leap onto Oreo yet, but I'll be damned if I can find a good, non-stock kernel for LOS 14.1 on my SM-T217S. I've tried repeatedly to compile my own from all the sources that are readily available, but the OS just hangs saying that Lineage OS is starting... and that's just the stock source with the specific commits for this device. I can't figure out if it's the toolchain I'm using or what.
Thanks for the time and effort that you've put into this, though. Having begun to try to do this kind of thing myself has really given me a new appreciation for the work that you and other XDA members do. Hopefully one day I'll be compiling my own ROM builds for y'all too.
Click to expand...
Click to collapse
Kernel source compiles based upon device. The kernel from 14.1 or 15.1 should be interchangeable. If the ROM boots to the initial screen then its probably not a kernel issues but another issue why it won't boot. You have to take a adb log and look at the output to determine why its hanging.
residentorca said:
With SIM inserted I see a persistent notification atop the notification panel that says No SIM card - No service. When I remove and re-insert the SIM, the message remains. Because of this I am unable to toggle cellular data on and off using the status bar Mobile data switch or in Settings-Mobile Network. All items are greyed out under Settings-Mobile Network. When I access the "Testing" menu by dialing *#*#4636#*#* and then select Tablet Info I am unable to Enable Data Connection. I recall that after the first boot after flashing your ROM the Cellular setup wizard never started even after removing and reinserting the SIM card. I don't think this is relevant but I did not flash any GAPPS package. I did flash the file 2016.02.08 Freedompop_APNs_fix.zip which I obtained from a different thread and has worked on other ROMs. My SIM is for FreedomPop which uses the Sprint data network. I did collect logcat and Bug Report files to share with you if you think they may help. Let me know if I may provide any additional information. Thanks!
Click to expand...
Click to collapse
Thanks I will take a look at the logs. Ya I don't have a sim to insert maybe I can find a friend who has a old one lying around. Did the sim show inserted on my previous build?
residentorca said:
Thanks, the SIM did not show on the previous build either.
Click to expand...
Click to collapse
OK cool. I will work on getting that sorted. Wish I knew that before lol. Currently trying to get the camera to work. Thanks though.
I have this exact tablet version, but does this work for serranolte?
Nice job on the rom too bad i dont have the right device model to test but anyways its awesome to see development for samsung tablets especially oreo
TurnaboutSavage said:
I have this exact tablet version, but does this work for serranolte?
Click to expand...
Click to collapse
It might work if you flashed a custom kernel but the blobs are slightly different so idk the answer. It would be up to you, I can't provide support as I don't have that device.
JT1510365 said:
Nice job on the rom too bad i dont have the right device model to test but anyways its awesome to see development for samsung tablets especially oreo
Click to expand...
Click to collapse
Thanks, I figured I would give it a try, this is my first build for this device specific.
Can i flash this on T210??
Voyage Maker said:
Can i flash this on T210??
Click to expand...
Click to collapse
Different hardware.
Sent from my SM-T217S using Tapatalk
residentorca said:
Thanks, the SIM did not show on the previous build either.
Click to expand...
Click to collapse
So I been looking at the radio files I used. I am thinking they would work. But they were made for a different device but do work with serranotexx which I assumed would be work with this device. Obviously I believe this is the issue, I will try to do a rebuild semi soon to see if I can sort that out. The hardware is slightly different between the s4 and this.
Sent from my SM-T217S using Tapatalk
Does the Rom work on sm t110?
user325 said:
Does the Rom work on sm t110?
Click to expand...
Click to collapse
Different hardware.
Sent from my SM-T217S using Tapatalk
Not Working
It's not working for me, I'm on the Samsung galaxy tab SM-T217S (Sprint). When I try to flash it with TWRP, it says:
Installing zip file
Checking for MD5 file...
Skipping MD5 check: No MD5 file found
Warning: No file contexts
E3004: This package is for device: lt02lte, lt02ltespr, lt02ltetmo; this device is .
Updator process ended with ERROR: 7
Error installing zip file
Updating partition details. . .
. . .done
Edit: FIXED, I edited the file and removed the version verification.
Justsnoopy30 said:
It's not working for me, I'm on the Samsung galaxy tab SM-T217S (Sprint). When I try to flash it with TWRP, it says:
Installing zip file
Checking for MD5 file...
Skipping MD5 check: No MD5 file found
Warning: No file contexts
E3004: This package is for device: lt02lte, lt02ltespr, lt02ltetmo; this device is .
Updator process ended with ERROR: 7
Error installing zip file
Updating partition details. . .
. . .done
Am I doing something wrong?
Click to expand...
Click to collapse
Reread the first page. Latest version of twrp is an absolute requirement.
Woodbuger said:
Reread the first page. Latest version of twrp is an absolute requirement.
Click to expand...
Click to collapse
I was on the latest version of TWRP.