Hello people
I'm new here, in terms of asking questions and seeking help
I have the LG Optimus P970
A few days ago I made the update to ICS, and by proceeding with this page, hackmyandroid.com/optimus-black-p970-official-ics-update/3299
After that, not impossible to connect the phone to a PC, even the software update mode, it can not recognize, anyway to connect it just throws a slow charging.
Is there someone who knows what it is.
I'd love to go back to the old software, but there is no way to detect it pc
Sorry for my bad english
Thanks in advance
I forgot to say, before the update, and my computer still recognize the phone, connecting it over sony usb cable, now it is no longer recognized by the Sony USB cable, and I do not have original LG USB cable.
Perhaps this is the reason why a computer will not recognize the phone
edzunic said:
I forgot to say, before the update, and my computer still recognize the phone, connecting it over sony usb cable, now it is no longer recognized by the Sony USB cable, and I do not have original LG USB cable.
Perhaps this is the reason why a computer will not recognize the phone
Click to expand...
Click to collapse
Your problem can be the non original cable or........reinstall the drivers and try again
Enviado desde mi LG-P970 usando Tapatalk 2
ferhpsquad said:
Your problem can be the non original cable or........reinstall the drivers and try again
Enviado desde mi LG-P970 usando Tapatalk 2
Click to expand...
Click to collapse
I have the original cable, but still the same problem.
I have all drivers installed, I can transfer files between the phone and the pc, I can use the LG suite,
But I can't see my phone on the ADB console, I can't use smartflashtool cause the phone isn't recoginized.
yesterday I tried with lg cable, and wall charger, in both cases, said slow charging the battery, I tried on three different computers, I tried to reinstall the drivers, like the software blocked communication with the phone, just charge the battery.
If there was a way to put the software through SD card, it might solve the problem.
even the software update mode, the computer does not see the phone
Bro! For the softwaretool like smartflash, You need to boot into download mode i.e., You need to switch off the phone, plug in the USB cable connected to the PC and instantly press the volume up button. Then the tool will recognise Your phone. Try it and check once!
I tried it, nothing happens,
I go to download mode, but computer does not recognize it again
behaves as if the port is destroyed
edzunic said:
I tried it, nothing happens,
I go to download mode, but computer does not recognize it again
behaves as if the port is destroyed
Click to expand...
Click to collapse
Try to boot your PC with disabled driver signatures, or use a 32bit windows system.
try entering download-mode the following way:
disconnect your phone from pc
remove battery
press and hold Vol-up
connect the usb-cable (still without battery)
Now the phone should be detected as a serial-cable device an you can use the smart flash tool.
would have to be sound,
no sound when I connect the phone to the PC
Solved my problem.
Seems like windows automatically installs driver to the phone, but it partially works.
Unistall all drivers for the phone, or try on a new computer.
Plug the phone and cancel the driver search by windows
Install drivers for LG (unplug the phone before)
Turn it off
Plug the cable and enter download mode
And there is the phone recognized on smartflashtool.
I'm flashing a new one right now, thank you.
You do not understand the problem
there's no sign, no sound when I connect the phone to a computer, any computer, drivers were or were not.
As if something in the phone blocked communication between the PC and phone
edzunic said:
You do not understand the problem
there's no sign, no sound when I connect the phone to a computer, any computer, drivers were or were not.
As if something in the phone blocked communication between the PC and phone
Click to expand...
Click to collapse
I got same problem.
bollix said:
I got same problem.
Click to expand...
Click to collapse
add me!
Connection Problem with Mackay 2.999
Hey Guys,
first of all, sorry for my not so good English
I'am at Mackay 2.999 with last Kernel of his build and can't connect the Phone to the Computer.
It only install the LGE Mobile Composite USB Device, the LGE Mobile USB Serial Port and the LGE Mobile USB Modem on connecting to the Workstation.
I had test it on many Computers but the Problem is all the same: I can't get on my Memory or ADB.
I also had testet all modes under the setting point (MTP/PTP/mass storage device) and with debbuging on and off.
On my Workstation is the Last Version of ADB (1.0.31) installed.
Did anyone know the problem?
Did no one know a result to this problem
Hmmm my PC also can't read my storage what I did is go to cwm and plugged in usb cable and pressed mount storage it seems to solve my problem. I also did a cache and dalvik cache wipe.
Hey, I have found the result to this problem. You must flash another Baseband. Use from Nooby the V30 Baseband and it is solved.
Gruß Ernst
via Tapatalk 2
but how to flash, when can´t connect to pc
lg optimus
hi frendz ,
please help me out
i'm using lg optimus p970..last night my phone memory get full and mobile get turn off ..now it wont turn on even battery is fully charged...only LG logo shows nithing else...
Hy guys , i have the same problem . I updated to 4.4.2 Nameless ROM and i can't connect my phone to pc . The only action that it's done : charging the phone and that's all . I tried connecting to another pc but with no result . An error appeared :" LGE USB Device - No driver found " .Before 4.4.2 i had 4.1.2 from CyanogenMod and with that ROM i had no problem connecting the phone to the pc . Any help ?
In none of these : fast boot,s/w mtp, PC did not recognize him.
But phone is working,why?I deleted driver from phone?
nfs32100 said:
In none of these : fast boot,s/w mtp, PC did not recognize him.
But phone is working,why?I deleted driver from phone?
Click to expand...
Click to collapse
fastboot - driver on PC
MTP - should work without drivers
s/w - you go into it with volume- and usb plug in
You should install drivers for phone on PC,
is your data cable working?
LGaljo said:
fastboot - driver on PC
MTP - should work without drivers
s/w - you go into it with volume- and usb plug in
You should install drivers for phone on PC,
is your data cable working?
Click to expand...
Click to collapse
All I went before, now I put both cable and charging only.Now a days walking and now why not go?It may be that I installed cyanogen 5.0, but I put back CM11.
I tried: Laptop and PC
******************** : 3 usb cables
nfs32100 said:
All I went before, now I put both cable and charging only.Now a days walking and now why not go?It may be that I installed cyanogen 5.0, but I put back CM11.
I tried: Laptop and PC
******************** : 3 usb cables
Click to expand...
Click to collapse
Do you see any devices in device manager when your phone is connected? You might want to do clean install on phone to check if it is this the problem in phone. Do backup!
Your phone not see anything, just load and the computer even that sound "connection" is not heard.
Hi all,
I know there are lots of similar topics but this is a little bit strange because I can't use adb and usb also.
Device rooted and TWRP 2.6.3.3 installed. I tried in different computers and cables but computers do not recognise phone. It just boots TWRP. Is there any way to copy files in the phone without usb and adb?
I have replaced usb port a couple months ago due to charging problem, now charging ok but pc doesn't recognise and says "unknown device".
hajimba said:
Hi all,
I know there are lots of similar topics but this is a little bit strange because I can't use adb and usb also.
Device rooted and TWRP 2.6.3.3 installed. I tried in different computers and cables but computers do not recognise phone. It just boots TWRP. Is there any way to copy files in the phone without usb and adb?
I have replaced usb port a couple months ago due to charging problem, now charging ok but pc doesn't recognise and says "unknown device".
Click to expand...
Click to collapse
USB OTG ?
USB-OTG doesn't work also.
hajimba said:
USB-OTG doesn't work also.
Click to expand...
Click to collapse
why not?
you could look here: http://forum.xda-developers.com/showpost.php?p=52135024&postcount=2
also here for usb-otg: http://forum.xda-developers.com/showpost.php?p=61449330&postcount=23
see if any of those work
or just flash a newer TWRP and use MTP transfer
twrp has usb mtp function
enable it
I changed usb socket. Now I'm able to connect phone but it only charges when phone off.
I had installed pixel experience on my Mi A2(jasmine_sprout) recently, after some days I had installed pixel experience plus using twrp. From that time my mobile is not detecting otg and when I connect it to pc it's only charging (tried file transfer in usb options,not working), whenever I try I put my phone fastboot mode,on my pc it's showing waiting for devices and my mobile is not rooted ,(twrp not installed permanently)help me to get out of this?
Siddiq_siddu said:
I had installed pixel experience on my Mi A2(jasmine_sprout) recently, after some days I had installed pixel experience plus using twrp. From that time my mobile is not detecting otg and when I connect it to pc it's only charging (tried file transfer in usb options,not working), whenever I try I put my phone fastboot mode,on my pc it's showing waiting for devices and my mobile is not rooted ,(twrp not installed permanently)help me to get out of this?
Click to expand...
Click to collapse
you SOT ....
you need adb & fastboot that works to do anything
you can only try 3 things:
1. find out what is wrong with usb ...try new official cables , reinstalling drivers, different usb ports , different pc
2. using application from playstore and on your phone enable and authorize adb via wifi / network
use this adb to force phone to boot to edl mode:
adb reboot edl
3. open your mobile with screwdriver following video tutorials .... using testpoint force edl mode
#in edl mode your phone WILL be detected if you install Qualcomm drivers then you can flash stock rom with miflash
i dont know why people mess with PE because like 80% have problems with wifi or usb or something
I am stuck in a very weird situation, my device is not getting detected in both adb in recovery mode and fastboot. I have no ROM (No OS) installed at the moment.
I am booting to recovery and fastboot through hardware keys.
I have tried installing drivers from mi unlock tool and any other USB drivers I could find in top searches of "USB drivers".
I am sure the USB cable is not the issue as other xiaomi device (Redmi note 4) is getting detected.
The port also looks fine as I can see 'charging' in recovery mode.
What are my options here? is my device 'gone'? I have orange fox recovery so I have access to `shell` if that helps.
Sparkenstein said:
I am stuck in a very weird situation, my device is not getting detected in both adb in recovery mode and fastboot. I have no ROM (No OS) installed at the moment.
I am booting to recovery and fastboot through hardware keys.
I have tried installing drivers from mi unlock tool and any other USB drivers I could find in top searches of "USB drivers".
I am sure the USB cable is not the issue as other xiaomi device (Redmi note 4) is getting detected.
The port also looks fine as I can see 'charging' in recovery mode.
What are my options here? is my device 'gone'? I have orange fox recovery so I have access to `shell` if that helps.
Click to expand...
Click to collapse
Hey man, I know this might sound dumb, but have tried using a different PC ??, I have been in a situation like this and trying using a different pc actually was successful
> Have you tried different PC
Yes. My first suspicion was USB3.0 Ports. So I tried a different PC as well. Unfortunately couldn't find a PC with USB 2.0 ports but yeah another PC didn't work as well (Note mine worked for past 4 years just fine)