Hi, I've Installed LineageOS/CM14.1 On my Lg l70 (D320) and i have been having some problems with rooting my phone here is what happens With all the programs i've tried:
KingRoot: Keeps on saying "Checking" and never stops
KingoRoot Mobile: Freezes On 90% And gives a new error code everytime
KingoRoot PC: Dosen't work
Also, Whenever I Plug my phone into my pc its freezes And then Bluescreens And Says "Exception Thread Not Handled/Expected" I Dont Remember well and under that There Is A error File? i dont really know what it means Its Called "igandnetmodem64.sys" And It Dosent Restart At 100% So I Need To Force It to Turn Off. Please Help
U have official lineage os for your device so it should work lineage script to get root. Go to lineage site, downloads, "extra". There u choose "arm version".
Should work..
https://download.lineageos.org/extras
Download ARM Version and flash it using recovery, it will work flawlessly.
I need to say something. My sdcard is formatted as internal storage because my phone has only 700 mb otherwise i also have CWM 6.0.5.0? I think it's the one with rainbow mode
Related
Like the title says:
I just tried to upgrade my Optimus 2X via PC software. The package downloaded fine but in the middle of the upgrade process the PC software crashed(!) and now I have a phone which is stuck in the upgrade boot screen saying:
"S/W Upgrade
Please wait while upgrading..."
So, what now? Any way to get this thing working again?
First, remove your battery and put it in your phone. Boot the phone up and see where it goes. If it goes into S/W mode again, that sucks. If it goes to the LG boot screen, put the battery out again and put it in. Press Power + Volume Down buttom to go into the CWM menu. From there you can restore your backup (if you made one) or mount the SD card and put the (rom).zip file in your SD card. Then just flash the zip from the CWM.
The update process by LG is pathetic. Many a times, I had the same problem as you. It would just get stuck. It is because of faulty drivers on their part, unable to maintain a connection with the phone.
You can try to NVflash clockwork mod recovery (CWM) and then recover your data.
i have the same problem.
i've tried everything without luck.
mine stopes att 4 procent and pc is trying to install some new device
lge mobile composite usb device.
there is no way to work around this issue.
i have tried absolutly everything.
wipe, clean, drivers this that. hard reset, variations in installing, i don't know what else i can do,
this is the message that cousing all of this.
this is located just in upgrade mode
the device is called
LGE mobile composite usb device
Universal Serial Bus controllers
LG Electronics Inc.
Location : Port_#0001.Hub_#0004
Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)
Thanks for the infos. I managed to install a stock rom and baseband with SmartFlash yesterday. Just a few minutes ago I used LG's update tool to update the phone to Gingerbread.
So, problem solved. If anyone has the same problem, follow these instructions to update the baseband:
http://android.modaco.com/topic/335494-12-aug-smartflash-stock-baseband-release-103521-20110725/
You can get stock roms from here:
http://forum.xda-developers.com/showthread.php?t=1035041
Evening. As I was trying to flash a ROM into my p880 i got a status 7 error which means device id == p880 is false, and searching on the forums lead me to something , deleting the 1st line of code drom update script wich was causing that problem.
Afterwards tried to flash again and the ROM start to flash but as it was trying to extract system it got status 7 again. The phone booted and I keep getting morning call is empty on LG logo.
I can't access Recovery and I tried to use LG Flash tool aswell but seems that my computer installs my device as "LGE Mobile Composite USB Device" with a yellow warning sign. Sometimes when I try to connect the phone with Recovery on the PC it just gets a white screen and keeps vibrating. Any idea how to fix ? I can try to provide more details if needed
I feel like I'm reading about MY first flashing tries
Get an external SD card, put fixed version of that ROM (or completely another one) on it, boot into recovery and flash ROM from there. Worked for me.
Hello all..
I'm sorry if this is the wrong section, but I can't connect my problem to anything similar..
I've been removing system apps on my phone and, unfortunately I selected Lg Home in a group, and without noticing I deleted it.
I did restart it after it.. and the problems started.
I was able to select the custom Home by LG somehow, but I'm enable to go into settings (getting "Unfortunately, Settings has stopped.")
After that, I noticed that I cannot do really anything on the phone.. my PC no longer recognize my device, usb debugging is disabled.
In addition, I cannot get into fastboot (boot loop, when I'm holding the keys),
I cannot go into recovery too.
I could only get to the LG hard reset page, did reset the phone.. with no success at getting anything back.
I have terminal emulator and SuperSU on my phone (it's rooted).
Is there anything I can do with the terminal? Like send LG drivers to my PC, or restarting in fastboot/recovery?
I even tried to flash the original ROM with LG Flesh Tool.
With that program I cannot get phone information, and when I try to flash I get a message saying that Upgrade stopped due to an error.
It asked me to restart and bla bla.. still same
I did try it from download mode, but my phone did not got recognized on the PC again, so nothing there too.
Whenever I connect the device to the PC, windows is searching for drivers for MTP Usb Driver (and fails everytime). Note: I did have those installed before I messed up the phone.
I have ADB and I'm working with cordova, so I tried to install another andorid on my pc, and it got recognized right away (every driver was installed without doing anything, and I can shell it).
Any advice?
Thanks.
Sorry for spamming..
But, nothing really??
First of all sorry for my bad English, I'm not very good
well ... what happens is that I was trying to partition my memory. witch this https://forum.xda-developers.com/lg-l90/orig-development/hack-partition-table-tool-lg-l90really-t2946323
but at the time of reinstalling the system again, I lost the twrp
I tried to see what to do, but to install twrp I needed to go back to the original rom of the cell phone. when connecting the phone to the PC in dowload mode I only see an error with the dirver "mtp"
I reinstalled everything, I already did everything but my cell phone does not connect to the PC
I do not know what to do, I do not have recovery twrp, I can not go back to the origianl rom, nor can I root the phone because it has slimrom installed now
I really need you to help
Josu0545 said:
First of all sorry for my bad English, I'm not very good
well ... what happens is that I was trying to partition my memory. witch this https://forum.xda-developers.com/lg...ck-partition-table-tool-lg-l90really-t2946323
but at the time of reinstalling the system again, I lost the twrp
I tried to see what to do, but to install twrp I needed to go back to the original rom of the cell phone. when connecting the phone to the PC in dowload mode I only see an error with the dirver "mtp"
I reinstalled everything, I already did everything but my cell phone does not connect to the PC
I do not know what to do, I do not have recovery twrp, I can not go back to the origianl rom, nor can I root the phone because it has slimrom installed now
I really need you to help
Click to expand...
Click to collapse
Which variant of the device do you have and can you be more specific with what error there was with the driver.
Hello,
I have a somewhat aged Idol 4 lying here.
This no longer boots or it hangs in the boot loop.
So I tried to install an update via a stock rom from the network via the recovery menu and ADB sideload and always got the error status 7. (Alcatel_Idol_4_6055K_01001_01002_OTA)
Resetting the system didn't help here either.
Then I tried to install TWRP on the device.
But unfortunately both methods that I tried failed.
Once via Sahara & firehose-test and the second was Suger QCT via the download mode.
But both of them got the error message NPRG Error 5002.
I have installed suitable USB drivers.
So my question, does anyone have a tip for me on how I could get the device revived?
And Sorry for my bad english
Hm.. said:
Hello,
I have a somewhat aged Idol 4 lying here.
This no longer boots or it hangs in the boot loop.
So I tried to install an update via a stock rom from the network via the recovery menu and ADB sideload and always got the error status 7. (Alcatel_Idol_4_6055K_01001_01002_OTA)
Resetting the system didn't help here either.
Then I tried to install TWRP on the device.
But unfortunately both methods that I tried failed.
Once via Sahara & firehose-test and the second was Suger QCT via the download mode.
But both of them got the error message NPRG Error 5002.
I have installed suitable USB drivers.
So my question, does anyone have a tip for me on how I could get the device revived?
And Sorry for my bad english
Click to expand...
Click to collapse
Hello, I deleted my system from twr without realizing what I was doing, the result is that I stay on the Alcatel logo. My steps were, the installation of sugar, when it starts not to update the application. Choose the 6055 model, since the 6055P model that is mine does not appear in the drop-down. Before starting sugar, turn off the mobile completely and connect it off to the usb of the pc, check if when connecting it the pc does not detect it, use another cable (there are many cables that only serve to charge and not to read on the pc) Now start sugar, choose the model and click on the Udgrade tab. You will surely get several messages saying that the mobile has been modified and that you lose the guarantee, go ahead accepting the message, in a few minutes you will have it ready. Greetings.
Perdigon55 said:
Hello, I deleted my system from twr without realizing what I was doing, the result is that I stay on the Alcatel logo. My steps were, the installation of sugar, when it starts not to update the application. Choose the 6055 model, since the 6055P model that is mine does not appear in the drop-down. Before starting sugar, turn off the mobile completely and connect it off to the usb of the pc, check if when connecting it the pc does not detect it, use another cable (there are many cables that only serve to charge and not to read on the pc) Now start sugar, choose the model and click on the Udgrade tab. You will surely get several messages saying that the mobile has been modified and that you lose the guarantee, go ahead accepting the message, in a few minutes you will have it ready. Greetings.
Click to expand...
Click to collapse
Hello, thanks for the answer and the download.
I've tried the same way. I still downloaded your file and tried as you described.
Unfortunately I got the same error NPRG Error 5002 again.
Unfortunately I have no idea where the problem could be.
I found out that it could be a memory error.
As if a flash process had failed and there is no longer a correct series of partitions.
So I would need a complete original rom and would have to flash it via fastboot.
I could also try it via twrp, but I don't get this flashed.
And I don't have a complete original rom either.
Hello,
So I have now been able to flash the phone with another PC with Sugar QCT after it suddenly started up after the battery was completely empty and I charged it again.
But unfortunately the boot problem persists after turning off the phone again.
Even after replacing the battery with a new one.
Then I tried to flash TWRP via the Alcatel Flasher.
The flash process was successful but there was no TWRP on it after the reboot.
So the problem could still be somewhere else than just the firmware.
Hm.. said:
Hello,
So I have now been able to flash the phone with another PC with Sugar QCT after it suddenly started up after the battery was completely empty and I charged it again.
But unfortunately the boot problem persists after turning off the phone again.
Even after replacing the battery with a new one.
Then I tried to flash TWRP via the Alcatel Flasher.
The flash process was successful but there was no TWRP on it after the reboot.
So the problem could still be somewhere else than just the firmware.
Click to expand...
Click to collapse
Hello, it may be that you are making the same mistake that I made when installing recoveri. When selecting the recovery, note that the twr is the one that weighs about 14 mb and the original one about 24 mb. I think that when you make a copy with the recovery program and then install the twr you select it wrong. In the program, do not make the copy of the recovery, skip that step and go directly to install and select the 14 mb file. You will see that this is the problem. Cheers