Related
Hi to all guys..the reason that i post is that i cant find any solution for this phone anyware...My friend have this device and he buy it from china market show the phone come with asia languages on os of phone but when start you can choose and european languages...so the problem is when we choose a european language phone on os respond half english half the other language....anyway i tried to flash it with QFIL phone go on qualcomm 9008 port success...in the end phone tell me that reboot and then phone dont nothing....when i plug it and press +volume button phone port is usb diacnostic 9006 driver and when i plug it pop up many partition disk...phone cant go on recovery mode cant turn on...so if someone have this problem i wish to help me...
i need the rom firmware of this phone and i way to recover this issue...phone its bricked and i hope to recover it...thanks again to all people here....
i did something Stupid and my Z2 Pro dead
there is no fast-boot and no recovery .. only black screen and when i press power button there is a short and long vibration just that and the LED there is flash yellow for 0.1 second
aljthab said:
i did something Stupid and my Z2 Pro dead
there is no fast-boot and no recovery .. only black screen and when i press power button there is a short and long vibration just that and the LED there is flash yellow for 0.1 second[/QUOTE try connecting it to the PC, if it doesn't show anything on PC then just hand it over to the lenovo service center and blame it on the device that it stopped booting :silly:. I thought i had bricked my device but they did something and gave it to me in 3 to 4 days and that was done under the warranty no extra charge and don't confess that I had rooted ur device , If u tell them that they will try to extort money from u :crying:
Click to expand...
Click to collapse
aljthab said:
i did something Stupid and my Z2 Pro dead
e LED there is flash yellow for 0.1 second
Click to expand...
Click to collapse
I have exactly the same, what to do? I installed the dev 44, the rate of established but after 15 minutes, logo is stalled, not waiting until the end of excess freewheeling dev 300, it is not fully established and bug crawled, I rebooted the machine and an endless vibration with green LED :crying:
1 Charging can be a little warm
2. can not be detected pc
3. can not access the fastboot mode
4. when charging, the notification light dies
5. deep flash cable has not helped
sorry my bad english
kerei said:
I have exactly the same, what to do? I installed the dev 44, the rate of established but after 15 minutes, logo is stalled, not waiting until the end of excess freewheeling dev 300, it is not fully established and bug crawled, I rebooted the machine and an endless vibration with green LED :crying:
1 Charging can be a little warm
2. can not be detected pc
3. can not access the fastboot mode
4. when charging, the notification light dies
5. deep flash cable has not helped
sorry my bad english
Click to expand...
Click to collapse
Refer to this http://zukfans.eu/community/threads/how-to-unbrick-zuk-z2-from-diagnostic-port-900e.2856/ and this http://zukfans.eu/community/threads/howto-flash-a-stock-zui-rom-zuk-z2-z2131-only.104/
same issue with zuk z2
adriano1593 said:
Refer to this http://zukfans.eu/community/threads/how-to-unbrick-zuk-z2-from-diagnostic-port-900e.2856/ and this http://zukfans.eu/community/threads/howto-flash-a-stock-zui-rom-zuk-z2-z2131-only.104/
Click to expand...
Click to collapse
Hello there... Any solution you found? I am stuck with my zuk z2 in same situation ?? any help ?
I have a similar problem.
What caused the black screen? -
History:
I booted to test mode at 2.5.033 ST, the phone got stucked at this menue there was no way to get out. TWRP Restore to Nandroid bougt only black screen after 2nd vibration and ZUK logo.
I fixed the Test mode bug, by flashing the ZUI 1.9.104 ST Stock ROM via QPST.
After the phone was "repaired" I unlocked the bootloader, installed TWRP, made a nandroid backup of fully stock ROM and restored a nandroid backup from before the test mode problem.
The nandroid restore was successful, I rebooted the phone and it was "dead". Black screen, only rebooting (perioldy vibrating) there was no end, until the battery was empty.
I got no luck to reach any mode with tricky button pressing (vol+ pwr; vol- pwr; vol+ vol- pwr; usb in vol-) nor Windows detecting the phone. That's why I decided to remove the back glass cover, to got access to the battery.
Now I'm able to get the phone detected by my PC.
What I did: disconnect the battery, connect the phone to my computer, pressed the vol- button and connect the battery.
This made my PC able to detect the phone, but no I have an other problem. Windows only detects the phone as "unknown usb device (device descriptor request failed)". I don't know any way to install the driver....
Maybe anyone is able to help me or has any tip?
Thanks!
Cheers,
m_atze
m_atze said:
I have a similar problem.
What caused the black screen? -
History:
I booted to test mode at 2.5.033 ST, the phone got stucked at this menue there was no way to get out. TWRP Restore to Nandroid bougt only black screen after 2nd vibration and ZUK logo.
I fixed the Test mode bug, by flashing the ZUI 1.9.104 ST Stock ROM via QPST.
After the phone was "repaired" I unlocked the bootloader, installed TWRP, made a nandroid backup of fully stock ROM and restored a nandroid backup from before the test mode problem.
The nandroid restore was successful, I rebooted the phone and it was "dead". Black screen, only rebooting (perioldy vibrating) there was no end, until the battery was empty.
I got no luck to reach any mode with tricky button pressing (vol+ pwr; vol- pwr; vol+ vol- pwr; usb in vol-) nor Windows detecting the phone. That's why I decided to remove the back glass cover, to got access to the battery.
Now I'm able to get the phone detected by my PC.
What I did: disconnect the battery, connect the phone to my computer, pressed the vol- button and connect the battery.
This made my PC able to detect the phone, but no I have an other problem. Windows only detects the phone as "unknown usb device (device descriptor request failed)". I don't know any way to install the driver....
Maybe anyone is able to help me or has any tip?
Thanks!
Cheers,
m_atze
Click to expand...
Click to collapse
What id shown in unknown device.
Like ven_9102&dev_1234
Maybe with editing quallcom drivers for your device id, you can still install it.
and if luck qpst can recognize it as qualcomm debug mod
Sent from my ZUK Z2121 using Tapatalk
eryenakgun said:
What id shown in unknown device.
Like ven_9102&dev_1234
Maybe with editing quallcom drivers for your device id, you can still install it.
and if luck qpst can recognize it as qualcomm debug mod
Sent from my ZUK Z2121 using Tapatalk
Click to expand...
Click to collapse
Hi,
Thanks for your quick response.
The Hardware ID: USB\DEVICE_DESCRIPTOR_FAILURE
"Error Message": This device has been stopped because it has reported errors. (Code 43)
An error occurred while requesting the USB device descriptor.
m_atze said:
I have a similar problem.
What caused the black screen? -
History:
I booted to test mode at 2.5.033 ST, the phone got stucked at this menue there was no way to get out. TWRP Restore to Nandroid bougt only black screen after 2nd vibration and ZUK logo.
I fixed the Test mode bug, by flashing the ZUI 1.9.104 ST Stock ROM via QPST.
After the phone was "repaired" I unlocked the bootloader, installed TWRP, made a nandroid backup of fully stock ROM and restored a nandroid backup from before the test mode problem.
The nandroid restore was successful, I rebooted the phone and it was "dead". Black screen, only rebooting (perioldy vibrating) there was no end, until the battery was empty.
I got no luck to reach any mode with tricky button pressing (vol+ pwr; vol- pwr; vol+ vol- pwr; usb in vol-) nor Windows detecting the phone. That's why I decided to remove the back glass cover, to got access to the battery.
Now I'm able to get the phone detected by my PC.
What I did: disconnect the battery, connect the phone to my computer, pressed the vol- button and connect the battery.
This made my PC able to detect the phone, but no I have an other problem. Windows only detects the phone as "unknown usb device (device descriptor request failed)". I don't know any way to install the driver....
Maybe anyone is able to help me or has any tip?
Thanks!
Cheers,
m_atze
Click to expand...
Click to collapse
Alright bro, there is one method you can try.
http://zukfans.eu/community/threads/howto-flash-a-stock-zui-rom-zuk-z2-pro-z2121-only.57/
I assume your phone is a brick now. The only method you can use is the 9008 unbrick mode. (AKA QBST)
There are a few things you need to prepare before you save ur phone. U need to download the require application that the website provided above, after you set everything up,
make sure you download the latest 2.5 QBST rom,
http://bbs.lenovomobile.cn/z2pro/t554654/
Because ur phone wont be able to enter 9008 through software, thus u need to do the following.
1. Load the content XML fille,
2.Turn off your phone. After it's fully shutdown
3. press and hold the volume up button for 3 seconds
4. press power button while hold the volume up (press it for 0.5second and keep holding it)
5. after 0.5 seconds, plug in the usb right away
6. the QFIL tool should appear the Qualcomm usb QD loader
7. the download button should turn blue
8. flash it and wait for reboot
OtakuLi said:
Alright bro, there is one method you can try.
http://zukfans.eu/community/threads/howto-flash-a-stock-zui-rom-zuk-z2-pro-z2121-only.57/
I assume your phone is a brick now. The only method you can use is the 9008 unbrick mode. (AKA QBST)
There are a few things you need to prepare before you save ur phone. U need to download the require application that the website provided above, after you set everything up,
make sure you download the latest 2.5 QBST rom,
http://bbs.lenovomobile.cn/z2pro/t554654/
Because ur phone wont be able to enter 9008 through software, thus u need to do the following.
1. Load the content XML fille,
2.Turn off your phone. After it's fully shutdown
3. press and hold the volume up button for 3 seconds
4. press power button while hold the volume up (press it for 0.5second and keep holding it)
5. after 0.5 seconds, plug in the usb right away
6. the QFIL tool should appear the Qualcomm usb QD loader
7. the download button should turn blue
8. flash it and wait for reboot
Click to expand...
Click to collapse
Thanks for your tip.
I followed your described procedure, but the phone will not be recocnized by the PC.
1st: I loaded QFIL XML file. (By the way this tut is made by me)
2nd: I disconnected the battery (The phone can't be turned off normally!)
3rd, 4th, 5th
6th: nothing happend!
7th: "-"
8th: "-"
The only way the phone will detected by the PC:
1st: disconnect battery
2nd: plug in USB (PC and Phone)
3rd: press VOL+ or VOL- or PWR button (doesn't matter which one)
4th: connect battery
5th: detected as "unknown usb device (device descriptor request failed)"
m_atze said:
Thanks for your tip.
I followed your described procedure, but the phone will not be recocnized by the PC.
1st: I loaded QFIL XML file. (By the way this tut is made by me)
2nd: I disconnected the battery (The phone can't be turned off normally!)
3rd, 4th, 5th
6th: nothing happend!
7th: "-"
8th: "-"
The only way the phone will detected by the PC:
1st: disconnect battery
2nd: plug in USB (PC and Phone)
3rd: press VOL+ or VOL- or PWR button (doesn't matter which one)
4th: connect battery
5th: detected as "unknown usb device (device descriptor request failed)"
Click to expand...
Click to collapse
Make sure you have to plug in the usb right away as soon as you u press power, and keep holding them
OtakuLi said:
Make sure you have to plug in the usb right away as soon as you u press power, and keep holding them
Click to expand...
Click to collapse
Yes, I did exactly you described. Sorry but this isn't working.
I don't know what I should do. Even a repair shop couldn't fix it.
Maybe I need to do this:
http://bbs.lenovomobile.cn/z2/t121791/?highlight=900e
But I don't want to destroy my PC (3000 bugs)
m_atze said:
Yes, I did exactly you described. Sorry but this isn't working.
I don't know what I should do. Even a repair shop couldn't fix it.
Maybe I need to do this:
http://bbs.lenovomobile.cn/z2/t121791/?highlight=900e
But I won't destroy my PC (3000 bugs)
Click to expand...
Click to collapse
oh well, good luck
OtakuLi said:
oh well, good luck
Click to expand...
Click to collapse
I will report the result.
OK. I made the deepflash cable.
After using it there is no difference between pressing one of the button combinations I recently mentioned (VOL+ or VOL- or PWR).
The phone will be detected as Unknown device. After intalling my modified driver to match the unknown ID, QFIL don't detect the COM Port.
Hello had the same problem, only with the difference that my battery was not completely discharged.
What has helped:
1 Start QFIL Tool
2 Press the volume +
3 Connect the original cable to the PC
4 QFIL Tool recognized the phone and I could play an original Rome.
Mfg
Ps. Is now the battery cover (glass) broken?
No, I used a hairdryer, a razorblade, plastic tool and a suction cup to lift the backcover glass.
The glass is fully intact no damages.
You have good nerves. I would not have expected that.
But in the end, it does not matter if it does not start anymore.
Thank you again for your great instructions for playing and rooting the mobile phone.
I hope you get your phone back.
Mfg
Good and bad news
The guy unbricked the phone successfully, I received it today.
Now I have an other problem:
The phone is very very slow and laggy now.
The problem occurs everywere, Recovery, boot (the bootlogo laggs), booted System, also the test mode laggs now
Furthermore the sceen flickers sometimes and at the right side the sceen is mirrored sometimes.
Did anyone has an idea?
What I did today:
reflash through qfil
1.9.104_ST
2.3.044_ST
ZUI_2.5.335_ST
Hi m_atze, I am exactly in the same situation as You. After using deep flash cable method, I got "unknown usb device (device descriptor request failed)". Could You tell me what was the solution to unbrick the phone?
Hey all,
I have Zuk z2pro z2121. I wanted more than stock ROM so I downloaded zui 2.5.344. I unlocked bootloader n rooted my phone as well as installed TWRP. "Tool All in one" PC software helped me to carry out above with ease.
While playing around I clicked "Lock Bootloader" and phone got switched off with indicating continuous blue light. I tried pressing vol down + power + Home button, and several other combination but didn't help. When I pressed power button for long, I got Zuk logo onscreen with a white flash on indicator for 1 sec and then again the blue light indicator.
After a little RnD after pressing power button till I got white flash for 3 times and the blue light got completely off. I don't know what to do further. I have backup of my boot , recovery and ROM. Kindly suggest.
Shoaib
Press and hold volume - and power . Release power, after vibration you can release the volume -. You will be in that menu https://ibb.co/f3vOHm . Go to device manager and check if pc recognize your phone https://ibb.co/bHqZOR . Open CMD in adb folder and write adb devices https://ibb.co/cwCg3R . Then adb reboot edl . You are i EDL https://ibb.co/cvjiHm . Use Qfil to flash stock rom
Didn't work...
Thanks for responding. As said, tried pressing Vol + Power and never got any vibrations. Tried Up vol + power, tried Down vol + power. No vibrations.
When I press power button with any combination, this is what happens,
After Approx 15 secs - 1 white light flash in place of blue along with ZUK pic on d display (stays approx 1 sec)
Still keeping power button pressed
After approx 7-8 secs - same as above
Still keeping power button pressed
After Approx 15 secs - 1 white light flash in place of blue along with ZUK pic on d display (stays approx 1 sec)
But now after this third time of flash, blue light appears and after 4-5 secs disssappears. If I leave the button only at this time, the blue light doesn't comes back.
If I leave the power button before or after this sequence, the blue light doeanon the indicator doesn't goes off at all.
What is happening when you connect phone with pc ? Is there any reaction ?
No reaction from PC.
I tried connecting to PC, earlier Tool all in one immediately use to detect, n now there is no response from the PC or the software after making USB connection.
Sir,
As I said earlier, I clicked lock bootloader, n when the screen went off, I disconnected the phone from PC. There is a possibility of the boot partition getting damaged or so. Kindly assist.
Rgds
There aren't any ways to enter in fastboot or recovery , even in service menu . I think you should try deep flash cable to enter in EDL .
Will do as u say. Just one last thing, when I checked device manager in my PC, it showed the phone as other devicez "QUSB XXXX". Question is,
1. Any possibilities of recovery without going for a deep flash, as I got to learn it first.
2. Other part is, my phones battery seems to be drained now. So, it won't be a problem for a deep flash.
Could you give some print screen ?
The matter is that you must switch your phone to edl . Try this yet . Your phone must be turn off .
Press only volume up button for 10 sec and while keeping it pressed,connect phone to PC . Hold volume up until your PC finds a new hardware . It should be android phone - ShenQi composite adb interface . If it doesn't work I have no more ideas apart from df cable . This cable works on Zuk z2 and I think it should works on our Zuk z2 pro
Sir,
I managed to connect the phone via USB as 9008. Miflash not supporting my ROM. Will download Stock ROM n then try with QFIL and MiFlash as well. Thanks for all your support. Will keep u posted about the progres. XML file is not found in any ROMs I have. Miflash some error also but detecting the device. Is there any other tool similar to Miflash, which I can try..
Rgds
First use QPST/Qfil . Follow this guide https://zukfans.eu/community/threads/howto-flash-a-stock-zui-rom-zuk-z2-pro-z2121-only.57/
Do all steps .
Good day.
I tried QFIL as well as Mi flash tool. Both showing errors. QFIL displaying Qualcomm HS USB QLoader 9008. But when downloading content , it shows Sahara error with even initiating the installation. After browsing a bit, started eMMC software download, and found displaying COM20 No phone connected. Can u assist me to fix this. I mean the phone must be in download mode. But how ?
Miflash, on the other hand shows Hello packet error. Don't know how to fix.
Things I did to fix above errors,
1. Copied ROM to Qualcomm/ bin file
2. Copied ROM to C:/
3. Tried using different USB ports
4. Tried different USB cables
5. Uninstalled n reinstalled USB driver, adb n fastboot, qpst, n miflash many a times along with restarting my PC.
None of the above helped.
I think, if eMMC software download starts displaying COM20 Phone connected, then the issue might be sorted out.
Kindly assist.
Rgds
DrTahseen said:
Good day.
I tried QFIL as well as Mi flash tool. Both showing errors. QFIL displaying Qualcomm HS USB QLoader 9008. But when downloading content , it shows Sahara error with even initiating the installation. After browsing a bit, started eMMC software download, and found displaying COM20 No phone connected. Can u assist me to fix this. I mean the phone must be in download mode. But how ?
Miflash, on the other hand shows Hello packet error. Don't know how to fix.
Things I did to fix above errors,
1. Copied ROM to Qualcomm/ bin file
2. Copied ROM to C:/
3. Tried using different USB ports
4. Tried different USB cables
5. Uninstalled n reinstalled USB driver, adb n fastboot, qpst, n miflash many a times along with restarting my PC.
None of the above helped.
I think, if eMMC software download starts displaying COM20 Phone connected, then the issue might be sorted out.
Kindly assist.
Rgds
Click to expand...
Click to collapse
U need ufs flash not emmc. Change programmer in qfil.
I have a some experience with miflash but I use it for xiaomi . I've never flashed my zuk z2 pro by miflash . If you want to use miflash use 2016.03.30 and run it on PC with win 64 . Create a folder on c: for example "zuk" and copy to that all contents of unrar Qpst/Qfil zui rom . If you have Qualcomm hs usb 9008 that means your phone is in edl ( download mode ) . Good luck
I appreciate all ur support....
As suggested, tried Miflash 30.03.2016 also. This ones showing class not registered.
No of things i did to overcome this errors.
1. Changed my PC to developer mode. Allowed portable device connections n stuff.
2. Visual studio C++ 2010 was installed along with Qualcomm driver, i believe thats sufficient.
3. Disabled my Firewall.
4. Downloaded n copied some atl70.dll file to my syswow64 folder as well as sys32 folder.
Tried all flash tools again after these changes....Same negative results.
Any further advices !!!
Regards
It's fault of drivers . Go to device manager and chose qualcomm hs usb 9800 and update driver automaticly . The second matter concerning of flashing by qpst/qfil - why did you put rom in qpst location ? . It must be for example on desktop in one folder . The simplest path is better . Don't use spacebar . Load content you must chose from that rom . Don't use other location . It's not necessary . Could you give some screenshots with qfil errors
DrTahseen said:
I appreciate all ur support....
As suggested, tried Miflash 30.03.2016 also. This ones showing class not registered.
No of things i did to overcome this errors.
1. Changed my PC to developer mode. Allowed portable device connections n stuff.
2. Visual studio C++ 2010 was installed along with Qualcomm driver, i believe thats sufficient.
3. Disabled my Firewall.
4. Downloaded n copied some atl70.dll file to my syswow64 folder as well as sys32 folder.
Tried all flash tools again after these changes....Same negative results.
Any further advices !!!
Regards
Click to expand...
Click to collapse
Did u use ufs flash in qfil instead of emmc?
Starchm said:
Did u use ufs flash in qfil instead of emmc?
Click to expand...
Click to collapse
Yups !!! I already did with Meta Build Type selection. Didnt Help. I tried to search for mbn file also to try emmc but cudnt find so was stuck with ufs....
mar.ur said:
It's fault of drivers . Go to device manager and chose qualcomm hs usb 9800 and update driver automaticly . The second matter concerning of flashing by qpst/qfil - why did you put rom in qpst location ? . It must be for example on desktop in one folder . The simplest path is better . Don't use spacebar . Load content you must chose from that rom . Don't use other location . It's not necessary . Could you give some screenshots with qfil errors[/QUOTE
https://forum.xda-developers.com/attachment.php?attachmentid=4339940&stc=1&d=1511421690
https://forum.xda-developers.com/attachment.php?attachmentid=4339941&stc=1&d=1511421690
https://forum.xda-developers.com/attachment.php?attachmentid=4339942&stc=1&d=1511421690
Click to expand...
Click to collapse
Hi everyone, I have a Lenovo zuk z2 pro, and it does not go out of EDL mode
I've tried everything, all the possible key combinations, it also has no indication of any led on, it just gets the screen all black and does nothing else, when I connect it to the USB port, QFIL recognizes it in the EDL 9008 mode, can anyone help me please?
Thank you in advance for your attention.
virusib said:
Hi everyone, I have a Lenovo zuk z2 pro, and it does not go out of EDL mode
I've tried everything, all the possible key combinations, it also has no indication of any led on, it just gets the screen all black and does nothing else, when I connect it to the USB port, QFIL recognizes it in the EDL 9008 mode, can anyone help me please?
Thank you in advance for your attention.
Click to expand...
Click to collapse
When you flash zui rom with qfil it restart automatically . What about your power button ? Everything was ok before that ?
How to move from edl to fastboot
Look this
youtube.com/watch?v=2m44xKog-dI
I've used this tutorial several times.
Try it, too.
It's safe
Hi, I discovered that my USB ports on my PC are broken, sorry and TKS guys
virusib said:
Hi, I discovered that my USB ports on my PC are broken, sorry and TKS guys
Click to expand...
Click to collapse
How can a broken port ( or do u say all ports?) recognize the phone with 9008, but is unable to flash?
They apparently work, but the copy of the files don't finish 100% in qfil app, I had Sahara error, but when I tried in the computer of my cousin, everything worked ok and I could make the installation of the stock room by qfil normally.
hello, i have hard brick at my mi8 .
When i try to press the power button the phone doesn't boot, If i try to go into recovery mode it doesn't boot and same for fastboot mode.
The screen is unresponsive (no backlight) and it doesn't vibrate. When i connect the phone to my computer it is automatically recognized as Qualcomm HS-USB QDLoader 9008 (COM5) which correspond to the EDL mode (i think).
When try to flash any rom with miflash i get the error " cannot receive hello packet.
Can anyone help me ?:crying:
anderssx1 said:
hello, i have hard brick at my mi8 .
When i try to press the power button the phone doesn't boot, If i try to go into recovery mode it doesn't boot and same for fastboot mode.
The screen is unresponsive (no backlight) and it doesn't vibrate. When i connect the phone to my computer it is automatically recognized as Qualcomm HS-USB QDLoader 9008 (COM5) which correspond to the EDL mode (i think).
When try to flash any rom with miflash i get the error " cannot receive hello packet.
Can anyone help me ?:crying:
Click to expand...
Click to collapse
Likely you have too much power coming from your usb ports, use a usb hub such as this: https://www.amazon.com/BYEASY-Porta...jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==
Now try Mi Flash again, make sure that the lock bootloader (which is checked by default) is unchecked.
Now it should work, be sure that you are using a fastboot rom and not a recovery rom. ( a recovery rom will not work)
Make sure that it is a fast boot for your device : If you have a global device here is a link with quite a few fastboot roms :https://c.mi.com/thread-1899815-1-0.html
If you still have trouble let me know, and tell me specifically how you arrived at your brick, I helped someone with this exact issue a couple of weeks ago, and I was going to link you to that thread. But i can't find it at the moment.
I get the same error " cannot receive hello packet" with hub USB.
MY xioami mi 8 is global version, i unlock the bootloader and make a downgrade with twrp to a older version of stable rom, and when the phone start ,its all ok and login my mi account, and the phone goes down and never more boot. Always in the pc i get qualcom port (edl mode) . Sorry for my bad english.:crying:
I think i need account with EDL authorization to flash any rom. And i can't found anyone to save me..
Try https://forum.xda-developers.com/mi-8/how-to/unbrick-mi8-edl-authorized-account-t3896677
Thank you .. i try this metod but no success
About s-unlock .. anyone knows if the service is online?
anderssx1 said:
About s-unlock .. anyone knows if the service is online?
Click to expand...
Click to collapse
Maybe try this site : MOD EDIT: link removed
I dont have his name but one of the techs from this site is a frequent XDA user and supposedly legit.
In the end there is a risk of losing $12. Seems to be worth $12 to me.
I send message to this brother , and it's 40 dollars .. i'm thinking about
thanks for reply