Can someone provide clean and clear procedure to root op3t. I am on 4.0.3. Few months back I tried to root but was stuck with so many issues. Maybe by now someone would have found workaround for DM verity problem. It was so much easy to root my old nexus 4.
For me the guide in the OP of the "[Recovery] Official TWRP for the OnePlus 3 & 3T by jcadduono" -thread has worked perfectly: https://forum.xda-developers.com/oneplus-3t/development/recovery-twrp-oneplus-3t-t3507308
Related
So I tried the latest SuperSu and also the beta version of Supersu but boot loop both the time. Did anyone root it? Or any idea or any other tool through which it can be done? I used the standard rooting method. Didn't work. I'm using Indian version k50a40_S324_160328_ROW current build.
Also, there's k3 note manager tool but it has negative reviews for rooting Marshmallow. Though will try it.
abmacwan said:
So I tried the latest SuperSu and also the beta version of Supersu but boot loop both the time. Did anyone root it? Or any idea or any other tool through which it can be done? I used the standard rooting method. Didn't work. I'm using Indian version k50a40_S324_160328_ROW current build.
Also, there's k3 note manager tool but it has negative reviews for rooting Marshmallow. Though will try it.
Click to expand...
Click to collapse
If u flash custom recovery and rooted stock then i GUESS you have to flash patched boot.img.. go to the index thread in k3 note general forums
Followed Shashwat Uttam YouTube video "how to root and install twrp recovery on lenovo k3 note!". It worked fine and easy. For rooting flash updated supersu. You can also follow the video for instructions.
Try this:
http://forum.xda-developers.com/k3-note/general/problems-rooting-lenovo-k50a40-k3-note-t3455233
Hello all.,,
I checked and read many thread slowly and steadily ,but couldn't find a good solution to root this phone 3T.
I just bought this Beautiful Device runing so smooth but with Hands tied too hard unable to run many apps and many ads and Bloatwares..
Thought to Root this device ,but all are mostly either Oxygen 3 or Marshmallow or 7.0. Version of ANdroid..and DW Error,is also a major concern to look out..
So Please help me to root this device running O2 4.1.1 (I literally dont want to change the stock,as of now) and Android 7.1.1 ,some simple steps...
Thanks and Regards
Awaiting for replies!!
I'm about to get this phone so I've been doing a lot of research myself. It looks like you can follow the steps in this thread and you can flash supersu through TWRP once you've unlocked the bootloader.
Unlock bootloader.
Flash TWRP.
Flash your preferred root zip in TWRP (SuperSU or Magisk are two good choices, I prefer Magisk).
That's about it...
i too tried the above method,,But I got struck with Logo of TWRP and got enabled only after 6 Hours.. But to my fate,,i'm still running on Stock recovery.. Not on TWRP !!
Use the latest official TWRP (currently 3.1.0-1). Works just fine.
i can relate to your question.
however, i discovered how to root the 3t and flash the usual zips files the finally the freedom rom, on my own.
it was a thrill.
i advise you to just take the blue pill.
I installed Blusparks Version of TWRP ,,but still no use,,SuperSU or Magisk both says My phone is not rooted!!!!
I want to live the Stock ROM and just to root the device,,But the steps are not futile for me!
What I would do if i was you.
Unlock bootloader
Flash TWRP
Flash latest Magisk 13.2 zip
Hey,
Is this method still valid for rooting the 3T?
https://forums.oneplus.net/threads/...wrp-root-nandroid-efs-backup-and-more.475142/
Yes, that is still valid, more or less. Might be a more current version of blue_spark's TWRP (official TWRP is on 3.1.1.2) although the link only says 3.1.1-x, so I don't know what that means. But probably won't make a huge difference.
Can't see what version Magisk is linked (my office network is blocking the link). If you choose Magisk, flash latest version 13.3, especially if you want to hide root (from Snapchat, banking apps, etc.). Older versions of Magisk will fail to hide, due to recent changes Google made to SafetyNet.
And what if we want to flash this beta to a brand new device?
http://downloads.oneplus.net/oneplus-3t/oneplus_3t_oxygenos_openbeta_12/
Should we first unlock the device, then install the TWRP recovery, then flash this beta rom and then root?
Hello dear community. Today, i just recieved my OP3T and I am super happy. Since I am a manian with new android versions + root + xposed, what i did is charge my new device and then start experimenting.
Firstly, i used this tool (https://forum.xda-developers.com/oneplus-3t/development/toolkit-oneplus-3t-toolkit-unlock-t3507729) to unlock bootloader, flash TWRP.
Then I used some VPN to change my location to Canada, and get the Oreo OTA.
Oreo OTA replaced TWRP, so I did some research to find out if its safe to reinstall TWRP 3.1.1, but i stumbled uppon some contradicting opinions both for TWRP and for Root. In the guides I read, some users commented that it might be very dangerous to either reinstall TWRP and/or supersu, so since I am not a guru, and my technical knowledge is kinda limited, I thought I'd create this thread before doing something stupid.
So, is it safe to reinstall TWRP in the latest Oreo OTA? (ONEPLUS A3003_28_171116)? Which version of TWRP do you suggest?
Is it safe to use the latest supersu?
Also, should i do a factory reset after the update?
I know for sure that xposed is not available for Oreo, so I wont be asking anything for it here.
Thanks in advance!
For Oreo, the latest TWRP is not recommended. You need the bluspark TWRP for Oreo. Here is the link. https://forum.xda-developers.com/devdb/project/?id=15934#downloads
Careful, there are two Bluspark TWRP, one for nougat and one for Oreo. Also it is unified for both op3 and op3t
I do not know about SuperSU but the beta version of Magisk works on Oreo. The stable version does not work yet. Here is the link for beta https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589
I am using the beta Magisk and BluSpark TWRP atm. It works fine. I did a clean flash using the full Oreo zip file (1.5gb). I think you can find this as a download on the XDA forum since OnePlus has not put it online yet. DO NOT CLEAN FLASH THE PARITAL OTA.
Hello, first time here but I need some help.
So I wanted to root my P10 (mainly for Viper) and I started digging around here and there (mostly in XDA). I followed few guides (on how to unlock the bootloader, how to flash TWRP, how to root...) but I still can't pull this off. Anyway, straight to the problem:
So as you can see I'm using P10 on Oreo (B360) and EMUI 8.0. I unlocked the bootloader using ADB & fastboot. Then I flashed this TWRP: link
So far everything went smooth and without any errors. I am able to boot into TWRP. So here I'm stuck trying to flash the root.zip (this one). Whenever I try I get the Error: 1 (as mentioned in the thread), however, I read here in XDA that on Oreo flashing boot.img bricks the phone? I saw several threads of people with bricked phones due to flashing boot.img. My question is - what do I do here?
I looked for other solutions like Magisk but from what I understood Viper4Android doesn't work on it.
Anyone... anything? I'd really appreciate any help.
If it's not possible (even though I've seen people with rooted P10s on Oreo...) is there a way I can revert back the changes I did so I can remove the warning message on bootup and possibly have my warranty back?
you Cant root it yet beacose there is no twrp for emui 8, so look and try some methodes root without TWRP
and why you wanna rooot emui 8, there is nothing for it, yet.
What do you mean? I already said I have TWRP and I'm able to boot into it without problems. I even linked the unofficial TWRP I flashed in my first post. Plus I saw few people here that have rooted P10s on Oreo. And finally all I want to install is Viper.
There is this TWRP by @espaciosalter20 : https://forum.xda-developers.com/p10/development/recovery-twrp-3-2-1-0-emui-8-0-4-04-2018-t3773449
should work, support for data decrpytion...
I used MAGISK 16 to root my OREO EMUI 8.0 P10
-done....
about super root and supersu working on OREO EMUI 8.0 you have to ask in the ROOT thread.
about viper4android i don´t know..i don´t use it.
Hello, every Developer...
So I own a OnePlus 3t (A3000). I rooted it using TWRP 3.2.3-1 & Magisk 16.7.
Everything was going fine until I upgraded Magisk with the Direct Install. My phone got into what forums say Bootloop.
I found many solutions but mostly had that Flash Magisk Un-installer and further. But whenever I was trying to Flash it said Error occurred installing.
So I thought that Installing Original ROM from OnePlus site would help but now its stuck on Circle Spinning.
I'm totally dead. Don't know what to do.
Please help me.
I would really appreciate a step by step guide as I am not good in understanding things like others here on this firm.
Root-1001 said:
Hello, every Developer...
So I own a OnePlus 3t (A3000). I rooted it using TWRP 3.2.3-1 & Magisk 16.7.
Everything was going fine until I upgraded Magisk with the Direct Install. My phone got into what forums say Bootloop.
I found many solutions but mostly had that Flash Magisk Un-installer and further. But whenever I was trying to Flash it said Error occurred installing.
So I thought that Installing Original ROM from OnePlus site would help but now its stuck on Circle Spinning.
I'm totally dead. Don't know what to do.
Please help me.
I would really appreciate a step by step guide as I am not good in understanding things like others here on this firm.
Click to expand...
Click to collapse
See this post https://forum.xda-developers.com/on...genos-5-0-1-android-8-0-t3728119/post78381819
And use TWRP 3.2.3-0 not -1
Sent from my OnePlus3T using XDA Labs