Stuck on "Your device is booting now..." when booting into TWRP recovery - Huawei P9 Plus Questions & Answers

So, I unlocked my bootloader and flashed twrp-3.0.2-0-vienna.img on my P9 Plus successfully. But when I try to enter Recovery mode, the device is stuck on the "Your device is booting now..." screen. Could it be that my model (C627) isn't supported by TWRP? I thought all VIE-L09 were supported.
I'm running 6.0.1 with EMUI 4.1.

Same here, I'm on C636 though.

This happened to me, TWRP 3.0.0 worked fine but 3.0.2 did not, I found out that by letting the battery die you can boot up and use your phone normally but I'm kinds stuck without a recovery... I have just "flashed" TWRP 3.3 from the LineageOS thread and I'm going to try and boot recovery now... Hoping all goes well otherwise no phone for the next 2 hours... I'll let you know if it works .
Any fixes appreciated <3
---------- Post added at 11:41 PM ---------- Previous post was at 11:37 PM ----------
Well I tried to boot recovery but to no avail, fortunately I managed to reboot back to android by holding volume up and power, then releasing volume up after the first vibrate and holding power until the "bootloader is unlocked" message appears... Good luck I hope we can sort this out.

That sucks
I hope one day we could sort this out...

pixl0915 said:
That sucks
I hope one day we could sort this out...
Click to expand...
Click to collapse
Same happened to me. It was the version of the TWRP. Currently, there's a TWRP version that works, but cannot mount any ROM as it does not have sufficient permissions to write on the partition table. I was on a boot loop and I got it to work by using the official recovery from huawei (erecovery).
I think we will have to wait for a few more days (month?) to have something stable and functional.

hi all i have p9 plus stuck in to your device is booting now... my pc not see any driver
fast boot not work
recovery not work
just show logo vibrate once and show "your phone is booting now.."
No debug actived and windows not detect any drive
i try with dload on sd card but not working

Use TWRP 3.0.3.0 vienna to start with. At some point I haven't figured out yet I'm able to flash 3.1.0 for Eva and then flash root.
If you don't want to wait out the battery dying, hold power+VolDown until reboot. Either it will boot into OS or eRecovery where you can shutdown and then hold VolDown when inserting USB to enter fastboot.
//Nik

pixl0915 said:
So, I unlocked my bootloader and flashed twrp-3.0.2-0-vienna.img on my P9 Plus successfully. But when I try to enter Recovery mode, the device is stuck on the "Your device is booting now..." screen. Could it be that my model (C627) isn't supported by TWRP? I thought all VIE-L09 were supported.
I'm running 6.0.1 with EMUI 4.1.
Click to expand...
Click to collapse
same here... did you find a solution?

matey86 said:
hi all i have p9 plus stuck in to your device is booting now... my pc not see any driver
fast boot not work
recovery not work
just show logo vibrate once and show "your phone is booting now.."
No debug actived and windows not detect any drive
i try with dload on sd card but not working
Click to expand...
Click to collapse
... any luck so far?
I got a similar problem now. Did you have any luck booting it again?

derJack said:
... any luck so far?
I got a similar problem now. Did you have any luck booting it again?
Click to expand...
Click to collapse
use ubuntu linux
open terminal
Type sudo su hit enter
Insert your pass
Type apt-get install android-tools-fastboot
After instaling
Type sudo su fastboot reboot-bootloader or fastboot reboot-bootloader
In terminal will be show <waiting for device>
Now press vol down and power button if not work first time repress button

matey86 said:
use ubuntu linux
open terminal
Type sudo su hit enter
Insert your pass
Type apt-get install android-tools-fastboot
After instaling
Type sudo su fastboot reboot-bootloader or fastboot reboot-bootloader
In terminal will be show <waiting for device>
Now press vol down and power button if not work first time repress button
Click to expand...
Click to collapse
Can I have the same problem?
your device is booting now...

Yes .. you flash twrp ?

Bootloader doesn't stay on the screen
matey86 said:
Yes .. you flash twrp ?
Click to expand...
Click to collapse
matey86 said:
use ubuntu linux
open terminal
Type sudo su hit enter
Insert your pass
Type apt-get install android-tools-fastboot
After instaling
Type sudo su fastboot reboot-bootloader or fastboot reboot-bootloader
In terminal will be show <waiting for device>
Now press vol down and power button if not work first time repress button
Click to expand...
Click to collapse
I tried your method and i was able to see the bootloader but it doesn't stay, it just blinks and back to the "Your device is booting now"
Any help?
Thanks

Try more time
U are using ubuntu ? Or windows ?

matey86 said:
Try more time
U are using ubuntu ? Or windows ?
Click to expand...
Click to collapse
I am using Ubuntu and I am able to boot into the rescue node, when i flash twrp, it flashes with
no error but, i cannot boot into twrp.
Any idea why?
Thanks

Try more version of TWRP , i not remeber what i use or install original file , use google

matey86 said:
Try more version of TWRP , i not remeber what i use or install original file , use google
Click to expand...
Click to collapse
OK.
If I'm able to flash back the stock rom, will the bootloader be relock again?
If not, how do I relock the bootloader on honor Note10..
Thanks

Related

[Q] Please help w/bootloader

Hello guys! I I stucked in very interesting case.....Been flashing Resurrection Remix with fullwipe from Chroma, all ok, on first boot i do a silly thing while boot become too long i goind to reboot phone and then see that phone is encrypting......it reboots and here i have "Encryption unsuccessful" and button factory reset which do nothing. I know about reboot to bootloader, but NRT can't reboot my device in bootloader, and my Vol- button broken. What i gonna do, please help, heard about hardbrick method or something else for reboot to bootloader. Thanks for advance :cyclops:
TAGTRAUM said:
Hello guys! I I stucked in very interesting case.....Been flashing Resurrection Remix with fullwipe from Chroma, all ok, on first boot i do a silly thing while boot become too long i goind to reboot phone and then see that phone is encrypting......it reboots and here i have "Encryption unsuccessful" and button factory reset which do nothing. I know about reboot to bootloader, but NRT can't reboot my device in bootloader, and my Vol- button broken. What i gonna do, please help, heard about hardbrick method or something else for reboot to bootloader. Thanks for advance :cyclops:
Click to expand...
Click to collapse
Does NRT give you an error when it tries to reboot into bootloader? Another reason to stay away from toolkits, but that is another debate for another time. Have you tried manually running the ADB commands to boot into fastboot? Do you have access to a computer with Android SDK installed?
Not sure what you want to do in bootloader. Recovery makes more sense to me. Flash a non-force encrypt kernel, format userdata and you're away.
From a command prompt / termina (whilst booting and connected with USB cable)...
Code:
adb reboot recovery
or
Code:
adb reboot bootloader
Circaflex said:
Does NRT give you an error when it tries to reboot into bootloader? Another reason to stay away from toolkits, but that is another debate for another time. Have you tried manually running the ADB commands to boot into fastboot? Do you have access to a computer with Android SDK installed?
Click to expand...
Click to collapse
Yes, tried manually commands before use toolkit, no luck "device not found", drivers are ok, device visible in Device Manager as MTP, before this "unsuccessful" flash works like a charm. And then is no way out, when device is on it show encryption message and still no luck with ADB. Maybe some script that override ADB and took me into recovery/bootloader??
TAGTRAUM said:
Yes, tried manually commands before use toolkit, no luck "device not found", drivers are ok, device visible in Device Manager as MTP, before this "unsuccessful" flash works like a charm. And then is no way out, when device is on it show encryption message and still no luck with ADB. Maybe some script that override ADB and took me into recovery/bootloader??
Click to expand...
Click to collapse
Nope.. If adb doesn't work and volume buttons are broken, you're stuck. Get the buttons repaired.
rootSU said:
Not sure what you want to do in bootloader. Recovery makes more sense to me. Flash a non-force encrypt kernel, format userdata and you're away.
From a command prompt / termina (whilst booting and connected with USB cable)...
Code:
adb reboot recovery
or
Code:
adb reboot bootloader
Click to expand...
Click to collapse
No luck with running this commands in boot process
TAGTRAUM said:
No luck with running this commands in boot process
Click to expand...
Click to collapse
Adb only works if the device is booted up or in sideload mode in recovery, fastboot works in fastboot/bootloader mode. Is/was the device recognised as a adb device when you typed `adb devices`in cmd?
gee2012 said:
Adb only works if the device is booted up or in sideload mode in recovery, fastboot works in fastboot/bootloader mode. Is/was the device recognised as a adb device when you typed `adb devices`in cmd?
Click to expand...
Click to collapse
Adb should work from part way through the boot process and any mode. in custom recovery.
gee2012 said:
Adb only works if the device is booted up or in sideload mode in recovery, fastboot works in fastboot/bootloader mode. Is/was the device recognised as a adb device when you typed `adb devices`in cmd?
Click to expand...
Click to collapse
No, it's not appear in "adb devices" on any process of boot, but Windows recognise in Device Manages as "MTP USB Device" even when phone off and connected via USB
TAGTRAUM said:
No, it's not appear in "adb devices" on any process of boot, but Windows recognise in Device Manages as "MTP USB Device" even when phone off and connected via USB
Click to expand...
Click to collapse
Try this:
http://forum.xda-developers.com/showthread.php?t=2588979
Evolution_Tech said:
Try this
Click to expand...
Click to collapse
Will try, but decide to repair my Vol- button myself, i have no mind what can be broken in this part, watching video of N6 dissassembly, its pretty simple part indeed Walking w/o Vol- for a month, and this situation is frustrating me and other situations can happen, in certain cases i still need Vol- :cyclops:

Op3t fastboot cannot install twrp

I tried to install twrp on my OP3T but everytime i write "fastboot flash recovery trwp.img" it says "error: cannot load 'twrp.img'"
When I type "adb devices" my phone doesn't show up
I unlocked the bootloader
I activated USB debugging
I checked the OEM thing
I have put the twrp.img in the same Minimal ADB and Fastboot folder
What could it be?
Install correct driveres or use another usb port. Device have to be adressed via "fastboot devices" or "adb devices".
It's probably a typing error ..Rename the twrp in whatever you want and then type " fastboot flash recovery " whatever you want".img
Rename file
Did you rename the file? You need to rename it before flashing.
IT WORKED
Everytime I was putting the phone into bootloader mode, the phone was already plugged in. Then I tried to put the phone to bootloader mode and THEN plugging it in my pc... and it worked ^^
Strange, right?
cerfeda.albert said:
Everytime I was putting the phone into bootloader mode, the phone was already plugged in. Then I tried to put the phone to bootloader mode and THEN plugging it in my pc... and it worked ^^
Strange, right?
Click to expand...
Click to collapse
I also experienced this thing this morning.
A simple unplug, re-plug solved for me
Whenever i flash twrp through fastboot it just gets stuck on the twrp logo and doesn't go beyond it.
I've tried with 3.0.3.1, 3.0.3.0, 3.0.2.0 but still the same
can anyone help me with this?
Guiliang said:
Did you rename the file? You need to rename it before flashing.
Click to expand...
Click to collapse
no you don't.
Just type the first few letters and hit [tab]. Works on windows, linux, mac os and every other shell made within the last 40 years.
cerfeda.albert said:
I tried to install twrp on my OP3T but everytime i write "fastboot flash recovery trwp.img" it says "error: cannot load 'twrp.img'"
When I type "adb devices" my phone doesn't show up
I unlocked the bootloader
I activated USB debugging
I checked the OEM thing
I have put the twrp.img in the same Minimal ADB and Fastboot folder
What could it be?
Click to expand...
Click to collapse
The last parameter has to be the EXACT filename, that you are flashing, which is the TWRP image. It has to be in the same folder as your command prompt is or you need to include the path to the twrp file.
Try the last TWRP release, should work!
Would like to express that I am also having the exact same issue. Any version of TWRP simply fails to load and stays on the TWRP logo.
I am on OxygenOS 3.5.3.
Anybody know a solution? I am currently running with no recovery now and I am quite worried.
milanexplorer said:
Whenever i flash twrp through fastboot it just gets stuck on the twrp logo and doesn't go beyond it.
I've tried with 3.0.3.1, 3.0.3.0, 3.0.2.0 but still the same
can anyone help me with this?
Click to expand...
Click to collapse
originalnabisco said:
Would like to express that I am also having the exact same issue. Any version of TWRP simply fails to load and stays on the TWRP logo.
I am on OxygenOS 3.5.3.
Anybody know a solution? I am currently running with no recovery now and I am quite worried.
Click to expand...
Click to collapse
After installing the twrp and then you type ... Fastboot boot twrp.img. Probably you are stuck on twrp splash screen...
Try to boot manually.to twrp by pressing power button and volume down button...Then you should be able to boot on twrp....
originalnabisco said:
Would like to express that I am also having the exact same issue. Any version of TWRP simply fails to load and stays on the TWRP logo.
I am on OxygenOS 3.5.3.
Anybody know a solution? I am currently running with no recovery now and I am quite worried.
Click to expand...
Click to collapse
See this thread.
originalnabisco said:
Would like to express that I am also having the exact same issue. Any version of TWRP simply fails to load and stays on the TWRP logo.
I am on OxygenOS 3.5.3.
Anybody know a solution? I am currently running with no recovery now and I am quite worried.
Click to expand...
Click to collapse
Did you try to fastboot TWRP after flashing it?
What I mean is, after you enter the command "fastboot flash recovery twrp.img", proceed with "fastboot boot twrp.img" and it will boot. Doing this you prevent Oxygen OS from overwriting TWRP. You should be able to boot normally after doing that.
Don't be worried and try to boot into recovery as described, that should work, if it doesn't I wonder if you flashed the right version of TWRP.
Try and let us know.
jmazzamj said:
Did you try to fastboot TWRP after flashing it?
What I mean is, after you enter the command "fastboot flash recovery twrp.img", proceed with "fastboot boot twrp.img" and it will boot. Doing this you prevent Oxygen OS from overwriting TWRP. You should be able to boot normally after doing that.
Don't be worried and try to boot into recovery as described, that should work, if it doesn't I wonder if you flashed the right version of TWRP.
Try and let us know.
Click to expand...
Click to collapse
how long does it usually take? i've waited more than 10 minutes now.
Razoth said:
how long does it usually take? i've waited more than 10 minutes now.
Click to expand...
Click to collapse
Boot manually on it...
cultofluna said:
Boot manually on it...
Click to expand...
Click to collapse
apperantly i'm a retard, after i rebooted to recovery with hardware keys it shows the oneplus logo and i was like "this isnt twrp startup" and hardreset it... waiting boots into twrp just fine...
adb cannot locate file
cerfeda.albert said:
Everytime I was putting the phone into bootloader mode, the phone was already plugged in. Then I tried to put the phone to bootloader mode and THEN plugging it in my pc... and it worked ^^
Strange, right?
Click to expand...
Click to collapse
I'm having some difficulty getting past this step.
I've unlocked bootloader, enabled oem unlock and enabled usb debugging. I've added the PATH where my twrp.img file is located.
Whenever I input fastboot flash recovery twrp.img, it says error: cannot load twrp.img: no such file or directory.
I see the file in the correct location so i'm not sure what i'm doing wrong here.
Any ideas?
chizzwhizz said:
I'm having some difficulty getting past this step.
I've unlocked bootloader, enabled oem unlock and enabled usb debugging. I've added the PATH where my twrp.img file is located.
Whenever I input fastboot flash recovery twrp.img, it says error: cannot load twrp.img: no such file or directory.
I see the file in the correct location so i'm not sure what i'm doing wrong here.
Any ideas?
Click to expand...
Click to collapse
Reinstall your adb + fastboot drivers

Phone can't boot stuck at "Your device is booting now" Please Help

Hello, I wanted to install TWRP and ROOT my phone. I flashed TWRP using adb terminal. But when I tried to boot into TWRP it was stuck on "Your device is booting now..". Then if I held the power button for few secs it rebooted normally. So I tried to google it and I found adb command that reboots to recovery
Code:
adb reboot recovery
. When I executed the command it rebooted to the "Your device is booting now.." screen and it stays like this forever. No button combination works to reboot the phone if i hold power button it reboots shows honor logo and then shows the "Your device is booting now.." screen. I waited for the battery to drain and then i put the phone on charger and when I tried to boot it, it was the same. Now when I try to reboot the phone it shows ultra low baterry symbol and then boots to "Your device..." screen.
NEM-L21; EMUI 5.0; 7.0 Nougat
Which twrp you flashed? Check the correct twrp in my signature for honor 5C repository.
TassiloBalbo said:
Hello, I wanted to install TWRP and ROOT my phone. I flashed TWRP using adb terminal. But when I tried to boot into TWRP it was stuck on "Your device is booting now..". Then if I held the power button for few secs it rebooted normally. So I tried to google it and I found adb command that reboots to recovery . When I executed the command it rebooted to the "Your device is booting now.." screen and it stays like this forever. No button combination works to reboot the phone if i hold power button it reboots shows honor logo and then shows the "Your device is booting now.." screen. I waited for the battery to drain and then i put the phone on charger and when I tried to boot it, it was the same. Now when I try to reboot the phone it shows ultra low baterry symbol and then boots to "Your device..." screen.
NEM-L21; EMUI 5.0; 7.0 Nougat
Click to expand...
Click to collapse
I think you have flashed wrong twrp.download correct twrp and flash it via adb fastboot
hassanjavaid8181 said:
I think you have flashed wrong twrp.download correct twrp and flash it via adb fastboot
Click to expand...
Click to collapse
Hi hassanjavaid8181
I think I have the same issue here, phone is stuck on "your device..." screen forever and it's impossible to do anything else (reboot ends up on the same screen).
How is it possible to flash twrp or stock recovery if we are stuck on this screen ? Fastboot doesn't see the phone...
Crocni said:
Hi hassanjavaid8181
I think I have the same issue here, phone is stuck on "your device..." screen forever and it's impossible to do anything else (reboot ends up on the same screen).
How is it possible to flash twrp or stock recovery if we are stuck on this screen ? Fastboot doesn't see the phone...
Click to expand...
Click to collapse
Meaning you can boot to fastboot but your pc doesn't recognise it?
Crocni said:
Hi hassanjavaid8181
I think I have the same issue here, phone is stuck on "your device..." screen forever and it's impossible to do anything else (reboot ends up on the same screen).
How is it possible to flash twrp or stock recovery if we are stuck on this screen ? Fastboot doesn't see the phone...
Click to expand...
Click to collapse
Did you try all method to going in fastboot.by adb fastboot command or by pressing vol- and power button?
Hi guys, thanks for your replies.
I somehow managed to boot to fastboot after waiting for the battery to go out completely. From there I used the following commands in ADB from the extract of a stock update.img :
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot reboot
And it worked ! The first boot was veeery long and now it's normal again.
Now my last concern is that I still have bootloader unlocked. As I wish to come back to factory state and avoid the warning message on boot, do you guys think it's safe to re-lock bootloader ?
I'm kind of scared to try anything else and screw the whole thing now
Thanks again for your support
Crocni said:
Hi guys, thanks for your replies.
I somehow managed to boot to fastboot after waiting for the battery to go out completely. From there I used the following commands in ADB from the extract of a stock update.img :
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot reboot
And it worked ! The first boot was veeery long and now it's normal again.
Now my last concern is that I still have bootloader unlocked. As I wish to come back to factory state and avoid the warning message on boot, do you guys think it's safe to re-lock bootloader ?
I'm kind of scared to try anything else and screw the whole thing now
Thanks again for your support
Click to expand...
Click to collapse
Glad that you fix your device.
If it is not bothering you let it be and enjoy using your phone.
Crocni said:
Hi guys, thanks for your replies.
I somehow managed to boot to fastboot after waiting for the battery to go out completely. From there I used the following commands in ADB from the extract of a stock update.img :
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot reboot
And it worked ! The first boot was veeery long and now it's normal again.
Now my last concern is that I still have bootloader unlocked. As I wish to come back to factory state and avoid the warning message on boot, do you guys think it's safe to re-lock bootloader ?
I'm kind of scared to try anything else and screw the whole thing now
Thanks again for your support
Click to expand...
Click to collapse
Can you please explain to me how did you managed to boot into fastboot? I tried waiting for the battery to drain completely. Now I can't fully charge my phone. When i connect it with charger. It starts normally charging like it would with 0% battery then after a few moments the honor logo shows up and then the screen "Your device.." shows. When I try vol- and powerbutton it vibrates and shows the red lightbolt then after few moments it boots the same way into the your device screen. When I connect it to the pc it doesn't react. I don't even hear the classic windows beep sound.
TassiloBalbo said:
Can you please explain to me how did you managed to boot into fastboot? I tried waiting for the battery to drain completely. Now I can't fully charge my phone. When i connect it with charger. It starts normally charging like it would with 0% battery then after a few moments the honor logo shows up and then the screen "Your device.." shows. When I try vol- and powerbutton it vibrates and shows the red lightbolt then after few moments it boots the same way into the your device screen. When I connect it to the pc it doesn't react. I don't even hear the classic windows beep sound.
Click to expand...
Click to collapse
Try removing the usb cable and then try to biot to fastboot. What about erecovery
shashank1320 said:
Try removing the usb cable and then try to biot to fastboot. What about erecovery
Click to expand...
Click to collapse
When I remove the usb cable it's still the same. When i try to press the power button it vibrates shows the low battery red lightbolt and dies. If you mean by erecovery emui recovery, then it looks like it's not installed.
TassiloBalbo said:
When I remove the usb cable it's still the same. When i try to press the power button it vibrates shows the low battery red lightbolt and dies. If you mean by erecovery emui recovery, then it looks like it's not installed.
Click to expand...
Click to collapse
You need to press power + volume down key to boot into fastboot. Keep trying 4-5 times sometimes it takes due to wrong press
shashank1320 said:
You need to press power + volume down key to boot into fastboot. Keep trying 4-5 times sometimes it takes due to wrong press
Click to expand...
Click to collapse
So I managed to get into the fastboot. Where can I get boot.img, recovery.img and system.img? I have downloaded some update.zip files from this russian site (first 5) http://hwmt.ru/hwmtsite/firmware-database/?firmware_model=NEM-L21&firmware_page=0. But I don't have boot, recovery and system images in these zips.
I also tried reboot in fastboot but its still the same:
fastboot devices
8SC4C16A13006909 fastboot
fastboot reboot
rebooting...
finished. total time: 0.026s[/CODE]
TassiloBalbo said:
So I managed to get into the fastboot. Where can I get boot.img, recovery.img and system.img? I have downloaded some update.zip files from this russian site (first 5) http://hwmt.ru/hwmtsite/firmware-database/?firmware_model=NEM-L21&firmware_page=0. But I don't have boot, recovery and system images in these zips.
I also tried reboot in fastboot but its still the same:
fastboot devices
8SC4C16A13006909 fastboot
fastboot reboot
rebooting...
finished. total time: 0.026s[/CODE]
Click to expand...
Click to collapse
Meaning the fastboot is accessible.
Now you have firmware zip, extract it amd you will get few files. Use dload method as given in my signature and you are good to go.
Else use Huawei extractor and browse to update.app you just got in above downloaded zip. You will get boot, recovery, system img you need.
I downloaded some firmware versions and extracted them. I don't know which is for my device. So I tried one of them. I flashed boot.img and recovery.img but I din't flashed the system.img, becouse it was too big. When I tried to reboot the phone it was the same. The fastboot was no longer accessible. I put the phone into servis but they didn't fixed it. it's the same but I can enter erecovery
TassiloBalbo said:
I downloaded some firmware versions and extracted them. I don't know which is for my device. So I tried one of them. I flashed boot.img and recovery.img but I din't flashed the system.img, becouse it was too big. When I tried to reboot the phone it was the same. The fastboot was no longer accessible. I put the phone into servis but they didn't fixed it. it's the same but I can enter erecovery
Click to expand...
Click to collapse
Please flash only files for your device and nothing else. Did you try dload method?
Give me model and build number, will get the correct files for you
shashank1320 said:
Please flash only files for your device and nothing else. Did you try dload method?
Give me model and build number, will get the correct files for you
Click to expand...
Click to collapse
NEM-L31 but I don't know the build number
TassiloBalbo said:
NEM-L31 but I don't know the build number
Click to expand...
Click to collapse
Build number is necessary to get right files..
hassanjavaid8181 said:
Build number is necessary to get right files..
Click to expand...
Click to collapse
I know. So do you think it's dead?
TassiloBalbo said:
I know. So do you think it's dead?
Click to expand...
Click to collapse
You should try huawei service center....

How to install rom, Can only access fastboot atm

Hey,
Guide was unclear and I deleted my rom. Ive accessed bootloader by update miui app. Now I can't access boatloader and phone is stuck at booting. I can only access fastboot. Do you know what can I do? Please help.
1. I got it back at fresh miui 8. When I try to install lineage os from device memory. It shows error
2. some tutorials say shift+right click shows cmd when fastboot and recovery in same directory. mine shows powershell window that doesn't work
Please link me valid guide or help
dixon118_pl said:
Hey,
Guide was unclear and I deleted my rom. Ive accessed bootloader by update miui app. Now I can't access boatloader and phone is stuck at booting. I can only access fastboot. Do you know what can I do? Please help.
1. I got it back at fresh miui 8. When I try to install lineage os from device memory. It shows error
2. some tutorials say shift+right click shows cmd when fastboot and recovery in same directory. mine shows powershell window that doesn't work
Please link me valid guide or help
Click to expand...
Click to collapse
I assume that twrp is not installed yet on your device and you've a unlocked bootloader. If that's the case go fastboot mode by turning your phone off and then pressing the power+volume down together. Then from your computer flash the latest twrp image ("fastboot flash recovery filename.img"). Then boot to recovery by pressing volume up+ power button and from the recovery flash lineage os. And don't forget to flash the required firmware before flashing lineage os.
sravans578 said:
I assume that twrp is not installed yet on your device and you've a unlocked bootloader. If that's the case go fastboot mode by turning your phone off and then pressing the power+volume down together. Then from your computer flash the latest twrp image ("fastboot flash recovery filename.img"). Then boot to recovery by pressing volume up+ power button and from the recovery flash lineage os. And don't forget to flash the required firmware before flashing lineage os.
Click to expand...
Click to collapse
I got it, using lineage os atm. Ty

Unlocking / Rooting Nokia 1 stock rom guide

Step 1 (Unlocking bootloader) :
Make sure you have adb and fastboot .
get your serial number.
Code:
adb shell getprop ro.serialno
calculate md5 of the serial number of device ( i used this https://passwordsgenerator.net/md5-hash-generator/).
Reboot bootloader.
Code:
adb reboot bootloader
Unlock using key (md5code=md5 of your serial number).
Code:
fastboot oem key md5code
Code:
fastboot oem unlock
Step 2 (flashing twrp fixing encryption problem):
Download twrp :=https://www.androidfilehost.com/?fid=1322778262903986803
Reboot bootloader by connecting power button + usb cable + volume down and type
Code:
fastboot flash recovery TWRP-3.2.3-TwrpBuilder-2018-08-21_14.img
.
Reboot recovery by using power button + usb connected + volume up at same time .
Download fstab:=> https://gist.githubusercontent.com/androidlover5842/e5fccc739251bb75ad7cf1d8ddc36e0d/raw/a4646983b481c02462cd0cfbf8decb9edf4f2ac9/fstab.mt6735 and go to mount menu in twrp => mount vendor and update fstab using this commnd .
Code:
adb push fstab.mt6735 /vendor/etc/fstab.mt6735
make backup of boot using backup option and flash stock recovery as boot (you can get stock recovery from here )
reboot system and it should reboot into stock recovery
wipe data using stock recovery
reboot back to twrp by pressing power + usb + volume button.
restore boot and flash magisk.
XDA:DevDB Information
Unlocking / Rooting Nokia 1 stock rom, Tool/Utility for the Nokia 1
Contributors
androidlover5842
Version Information
Status: Stable
Created 2018-08-21
Last Updated 2018-08-21
unlock failed
it seems the key did not work. Maybe imei is involved in generating key? (my Nokia 1 is dual sim)
---------- Post added at 11:44 PM ---------- Previous post was at 11:26 PM ----------
slim404 said:
it seems the key did not work. Maybe imei is involved in generating key? (my Nokia 1 is dual sim)
Click to expand...
Click to collapse
SOLVED.
I had to allow OEM unlocking in Developer Settings
androidlover5842 said:
Step 2 (flashing twrp fixing encryption problem):
reboot system and it should reboot into stock recovery
Click to expand...
Click to collapse
Hmm all good till this step, but the device stuck doesn't reboot into stock recovery but bootloop TWRP
Obviously i messed up something and i wonder what it is
ObviousSimple said:
Hmm all good till this step, but the device stuck doesn't reboot into stock recovery but bootloop TWRP
Obviously i messed up something and i wonder what it is
Click to expand...
Click to collapse
I got the same problem. I found out the recovery file he linked to was that of a single SIM Nokia 1 (TA-1060) mine is a Dual Sim Nokia 1 (TA-1047)
I downloaded the TA-1047 original firmware (I googled it)
I used it to reflash boot and recovery. Then redid everything using this time the right original recovery.bin from the TA-1047 firmware and it worked
Android Downgrade
I'm planning to buy this phone but I don't like the software. Can I install Android Kit Kat on it?
Hi! I have soft-bricked Nokia 1 ta-1047(recovery bootloop). How can i unlock bootloader without checkin OEM unlock in dev settings? Thks!
Hi! I had some trouble understanding the instructions. Step 1 worked without a hitch but I ran into some problems in step 2. I'd be really grateful for some help.
Do I copy the text in the link, paste it into a .txt file and then save it to "ftsab.mt6735" in the Minimal And Adb Fastboot folder on my pc?
Do I press cancel when twrp asks me for a password? Or do I need a password? I pressed cancel.
When I go into "mount" in twrp and click on "vendor" do I then go the command window on my pc (from the adb fastboot folder) and type "adb push fstab.mt6735 /vendor/etc/fstab.mt6735"? This is what I did and it might have come with an error I'm not sure.
What is the backup of boot for? I guess it's just a safety measure. For some reason I couldn't do that because it said something about encyption (I think, unless I'm getting mixed up with before) so I had to skip that step and go onto flashing the recovery. The instructions now say "flash stock recovery as boot (you can get stock recovery from here)". Is the stock recovery the "recovery.bin" file and do I put that in the adb and fastboot folder? I did that and typed "fastboot flash recovery recovery.bin" in the command window. Was that right or not?
The instuctions say "restart the system" Is that from the twrp menu? I restarted the phone via twrp but it didn't restart into stock recovery it restarted into the normal operating system. I knew then that I'd done something wrong. I then turned off the phone and tried accessing the stock recovery by pressing the volume up and power on and it started in twrp! Am I getting confused? Please can someone help me! Thank you!
anhadsingha said:
I'm planning to buy this phone but I don't like the software. Can I install Android Kit Kat on it?
Click to expand...
Click to collapse
No you can't and why would you want KitKat. Kitkat was good 5 versions ago
---------- Post added at 03:20 PM ---------- Previous post was at 03:17 PM ----------
mountainair said:
Hi! I had some trouble understanding the instructions. Step 1 worked without a hitch but I ran into some problems in step 2. I'd be really grateful for some help.
Do I copy the text in the link, paste it into a .txt file and then save it to "ftsab.mt6735" in the Minimal And Adb Fastboot folder on my pc?
Do I press cancel when twrp asks me for a password? Or do I need a password? I pressed cancel.
When I go into "mount" in twrp and click on "vendor" do I then go the command window on my pc (from the adb fastboot folder) and type "adb push fstab.mt6735 /vendor/etc/fstab.mt6735"? This is what I did and it might have come with an error I'm not sure.
What is the backup of boot for? I guess it's just a safety measure. For some reason I couldn't do that because it said something about encyption (I think, unless I'm getting mixed up with before) so I had to skip that step and go onto flashing the recovery. The instructions now say "flash stock recovery as boot (you can get stock recovery from here)". Is the stock recovery the "recovery.bin" file and do I put that in the adb and fastboot folder? I did that and typed "fastboot flash recovery recovery.bin" in the command window. Was that right or not?
The instuctions say "restart the system" Is that from the twrp menu? I restarted the phone via twrp but it didn't restart into stock recovery it restarted into the normal operating system. I knew then that I'd done something wrong. I then turned off the phone and tried accessing the stock recovery by pressing the volume up and power on and it started in twrp! Am I getting confused? Please can someone help me! Thank you!
Click to expand...
Click to collapse
If you're phone booted fine into system and you can access twrp then just flash magisk as you've done ok and the phone and twrp are working
How to "flash stock recovery as boot" ?
How to "flash stock recovery as boot" ? I went to fastboot mode and flashed recovery.bin then rebooted to recovery and it showed "no commands". No options were there.
ttocs99 said:
If you're phone booted fine into system and you can access twrp then just flash magisk as you've done ok and the phone and twrp are working
Click to expand...
Click to collapse
Thanks. But I'm still not sure. I confess I'm a novice. I actually ended up bricking my phone because I went on to do something wrong. I'll get another phone this week to try and root again, hopefully successfully this time. Isn't the step to make a backup of the boot really important because we have to flash that boot near the end? I thought it was necessary. I also wonder whether I should have typed "fastboot boot recovery.img" instead of "fastboot flash recovery recovery.img" because the instructions say "flash stock recovery as boot"? Edit: Perhaps I'm wrong again
madmax786 said:
How to "flash stock recovery as boot" ? I went to fastboot mode and flashed recovery.bin then rebooted to recovery and it showed "no commands". No options were there.
Click to expand...
Click to collapse
Did you manage to get a backup of the boot?
I can have no access in the udev/ etc.... Can you please explain the following steps how to do it? is it a linux command that needs to be done on a linux running computer or does it works on Windows too?
i was indeed happy that it completed the backup to my external SD Card made with Magisk a patched boot image, but doesn't seem to be rooted after all, what next? it says every time Magisk is not installed do i have to flash it in minimal ADB
Sincerely
Des.Coene said:
I can have no access in the udev/ etc.... Can you please explain the following steps how to do it? is it a linux command that needs to be done on a linux running computer or does it works on Windows too?
i was indeed happy that it completed the backup to my external SD Card made with Magisk a patched boot image, but doesn't seem to be rooted after all, what next? it says every time Magisk is not installed do i have to flash it in minimal ADB
Sincerely
Click to expand...
Click to collapse
Rooting this for now is a gamble there is only 1 stock ROM to flash and it's for the UK single SIM varient of the Nokia 1 only thing you can have is root and twrp and maybe flash a gsi but most of them are still buggy if you can flash stock and stay that way untill further development.
ttocs99 said:
Rooting this for now is a gamble there is only 1 stock ROM to flash and it's for the UK single SIM varient of the Nokia 1 only thing you can have is root and twrp and maybe flash a gsi but most of them are still buggy if you can flash stock and stay that way untill further development.
Click to expand...
Click to collapse
There seem to be buggy , certainly when 2 different chip sets are used in several Nokia 1 series
the mt6737 as i have & the mt6735 there's what i've been struggling with.
Thanks anyways for the advice
Sincerely
Des.Coene said:
There seem to be buggy , certainly when 2 different chip sets are used in several Nokia 1 series
the mt6737 as i have & the mt6735 there's what i've been struggling with.
Thanks anyways for the advice
Sincerely
Click to expand...
Click to collapse
I have the mt6735 but shouldn't be long for a custom ROM as root and twrp have been achieved.
madmax786 said:
How to "flash stock recovery as boot" ? I went to fastboot mode and flashed recovery.bin then rebooted to recovery and it showed "no commands". No options were there.
Click to expand...
Click to collapse
Hi,i got the exact same problem
ramnus said:
Hi,i got the exact same problem
Click to expand...
Click to collapse
Hi, try holding the power button for a few seconds and then releasing it and pressing volume up.
For the record, I managed to root my ta 1060 phone. Thanks everyone. I think I had a problem initially because twrp asked for a password due to phone encryption and I ignored it. I managed to bypass that password screen by not rebooting after flashing twrp, instead going straight into twrp and following the instructions.
I've now got a problem getting usb otg to work. I've added the files android.hardware.usb.host.xml, handheld_core_hardware.xml and tablet_core_hardware.xmls. It's showing as enabled in all the app checkers but Usb Otg Helper says E: Mount directory could not be created, E: This app will not work, OTG mass storage not supported?, NTFS write support failed(no fuse). That's not a topic for here though. If anyone can help, can they pm me please
Nokia 1 root
mountainair said:
Hi! I had some trouble understanding the instructions. Step 1 worked without a hitch but I ran into some problems in step 2. I'd be really grateful for some help.
Do I copy the text in the link, paste it into a .txt file and then save it to "ftsab.mt6735" in the Minimal And Adb Fastboot folder on my pc?
Do I press cancel when twrp asks me for a password? Or do I need a password? I pressed cancel.
When I go into "mount" in twrp and click on "vendor" do I then go the command window on my pc (from the adb fastboot folder) and type "adb push fstab.mt6735 /vendor/etc/fstab.mt6735"? This is what I did and it might have come with an error I'm not sure.
What is the backup of boot for? I guess it's just a safety measure. For some reason I couldn't do that because it said something about encyption (I think, unless I'm getting mixed up with before) so I had to skip that step and go onto flashing the recovery. The instructions now say "flash stock recovery as boot (you can get stock recovery from here)". Is the stock recovery the "recovery.bin" file and do I put that in the adb and fastboot folder? I did that and typed "fastboot flash recovery recovery.bin" in the command window. Was that right or not?
The instuctions say "restart the system" Is that from the twrp menu? I restarted the phone via twrp but it didn't restart into stock recovery it restarted into the normal operating system. I knew then that I'd done something wrong. I then turned off the phone and tried accessing the stock recovery by pressing the volume up and power on and it started in twrp! Am I getting confused? Please can someone help me! Thank you!
Click to expand...
Click to collapse
Have you found password ?
Help please
Des.Coene said:
There seem to be buggy , certainly when 2 different chip sets are used in several Nokia 1 series
the mt6737 as i have & the mt6735 there's what i've been struggling with.
Thanks anyways for the advice
Sincerely
Click to expand...
Click to collapse
Buddy is there anyway I could get stock or custom rom to bootup my bricked MT6737 TA1056 ??
I’m stuck in a blank screen and vibration
xdakanwal said:
Have you found password ?
Click to expand...
Click to collapse
No, when I found it asked for a password I realised I shouldn't have rebooted the system and so I wiped the data and flashed twrp again and no more password.
My TA-1066 is basically dead. Unlocked, doesn't boot into recovery, flashing the ROM fixed it last time this happened. Now it doesnt. In a bootloop with the NOKIA logo.
Help would be really appreciated.
---------- Post added at 07:23 AM ---------- Previous post was at 07:23 AM ----------
My TA-1066 is basically dead. Unlocked, doesn't boot into recovery, flashing the ROM fixed it last time this happened. Now it doesnt. In a bootloop with the NOKIA logo.
Help would be really appreciated.

Categories

Resources