https://yadi.sk/d/aDqvPskH3EaeFX
Based on the 3.10 kernel... (for the first revision, Android 5.1) Beta-try, chase, complain, correct.))
The same Resurrection Remix with the system settings
Features and changes:
Very fast firmware in the likeness of Resurrection Remix
The latest source code for AOSP/LOS
Combines various features from LOS, RR, Paranoid Android, SlimRoms, OmniRom, etc.
Support Substratum Theme Engine
There is a good feature called LTE. It disables only voice calls and WIFI works.Not to be confused with airplane mode
Fixed Offline charging
Root is built-in is enabled in developer options
Gapps sewn.
So this is android 5.1 or 7.1 ? I'm willing to try it on my elephone M2.
NLSteve said:
So this is android 5.1 or 7.1 ? I'm willing to try it on my elephone M2.
Click to expand...
Click to collapse
7.1.1.
I have a problem installing this.
Update: I think the problem is I encrypted phone before installing this using 9x9 grid. I will decrypt phone and try again.
I used TWRP 2.8.7.3 (megthebest) -> install crDroidAndroid-7.1.1-20170223.zip
FAILED
Updating partition details...
...done
" E:Resource (image)-(background) failed to load "
E:Error executing updater binary in zip '/external_sd/crDroidAndroid-7.1.1-20170223.zip
Click to expand...
Click to collapse
Error flashing zip '/external_sd/crDroidAndroid-7.1.1-20170223.zip'
Updating partition details...
...done
NLSteve said:
I have a problem installing this.
Update: I think the problem is I encrypted phone before installing this using 9x9 grid. I will decrypt phone and try again.
I used TWRP 2.8.7.3 (megthebest) -> install crDroidAndroid-7.1.1-20170223.zip
FAILED
Error flashing zip '/external_sd/crDroidAndroid-7.1.1-20170223.zip'
Updating partition details...
...done
Click to expand...
Click to collapse
TWRP 3.0 It is necessary to use
update:
Listed: 02/25/2016 11:30 pm
ROM Version: TWRP M2 3.0.0
http://www.needrom.com/wp-content/uploads/2016/02/TWRP-3.0.0-Elephone-M2-megthebest.rar
NLSteve said:
update:
Listed: 02/25/2016 11:30 pm
ROM Version: TWRP M2 3.0.0
http://www.needrom.com/wp-content/uploads/2016/02/TWRP-3.0.0-Elephone-M2-megthebest.rar
Click to expand...
Click to collapse
What is it?
NLSteve said:
update:
Listed: 02/25/2016 11:30 pm
ROM Version: TWRP M2 3.0.0
http://www.needrom.com/wp-content/uploads/2016/02/TWRP-3.0.0-Elephone-M2-megthebest.rar
Click to expand...
Click to collapse
You tried to link to
duffi200000 said:
You tried to link to
Click to expand...
Click to collapse
yes. This is working download link for TWRP 3.0
---------- Post added at 01:53 PM ---------- Previous post was at 01:14 PM ----------
To get working Wi-Fi set country Wi-Fi region code to Europe or Germany that did the trick.
So far so good. Nice OS you have here. All good still runnning.
I'm noticing this OS is faster compared to cyanogen
Android 7.1.1 has issues with:
- Gboard keyboard disappearing when typing.
Solution: Install keyboard app like swiftkey.
- File transfers USB: files to Windows or Mac (MTP) does not work.
Solution: use transfer photo (PTP) and copy files to DCIM folder, later move files with an explorer app on the phone.
- No support for Xposed framework as of yet. Read latest post by Rovo89
NLSteve said:
yes. This is working download link for TWRP 3.0
---------- Post added at 01:53 PM ---------- Previous post was at 01:14 PM ----------
To get working Wi-Fi set country Wi-Fi region code to Europe or Germany that did the trick.
So far so good. Nice OS you have here. All good still runnning.
I'm noticing this OS is faster compared to cyanogen
Android 7.1.1 has issues with:56
- Gboard keyboard disappearing when typing.
Solution: Install keyboard app like swiftkey.
- File transfers USB: files to Windows or Mac (MTP) does not work.
Solution: use transfer photo (PTP) and copy files to DCIM folder, later move files with an explorer app on the phone.
- No support for Xposed framework as of yet. Read latest post by Rovo89
Click to expand...
Click to collapse
http://4pda.ru/forum/index.php?showtopic=678045&st=5240#entry52552870
Try that, that's what I was able to set the phone to the computer, everything works fine. And Yes the firmware is still a test, but she's really smart, the problem with the camera can't decide
Thank you, I will try that for usb connection to computer.
This is a nice rom overall. @duffi : Did you find 56 issues? i see you added this to my text "Android 7.1.1 has issues with:56 "
If anyone needs advice or a step-by-step guide to install on elephone M2, feel free to ask!
Hi NLSteve,
can I get a step by step guide for install 7.1.1 on M2? I use 5.1 latest rom and I have root on the prhone.
How To Install CrDrooid Android 7.1 on Elephone M2
Make sure you save your contacts and essential info to SD card or computer.
If for any reason your phone is encrypted, change the unlock code to pin 4 numbers! if you use pattern larger than 3x3 or more complex pin you're screwed XD
For this guide, you will need:
Sp-flash-tool-v5-1648 (latest version)
TWRP M2 3.0 (megthebest)
CrDrooid Android 7.1
SR3-SuperSU-v2.79-SR3 (latest version)
Copy the ROM and supersu to External SD Card.
TWRP flashing with SP Flash Tool
1. Shut down your phone and Disconnect usb cable from pc.
3. Run SP Flash Tool and navigate to 3rd tab Download, load download agent MTK_AllInOne_DA.bin and load MT6753_Android_scatter-TWRP3.txt for your phone.
4. Only have recovery checked and keep the option Download Only.
5. Click Download button and connect your phone (which is off) with PC via USB cable. Process should start. After process (60 seconds or more) is finished you will see green circle on screen again. Unplug USB from phone.
6. Turn on by pressing Power and Volume +, hold for 10-20 seconds until boot into TWRP recovery mode.
Installing ROM
1. Go to Wipe. Go to Advanced Wipe. From here, tick the boxes next to Dalvik Cache, System, Data and Cache, then swipe the slider at the bottom to perform a full wipe.
2. Go back to Install and browse to the location where you saved the file and select the crDroidAndroid-7.1.1-20170223.zip file
3. When done tap Reboot to boot into Android.
4. After system done, shut down to recovery and install supersu.zip by browsing to the location of Supersu.zip and choose install.
This is it for now. Good luck!
Hi NLSteve, it works, Antutu 39965 Points. But camera is not working, Fingerprint is not working and Bluetooth is also not working, its flaky. Phone M2 works faster then stock ROM 5.1. What I do missing is the function for updates next time. Great work. Hall Sensor is also not working. Thx.
Hi @volobobo, sorry to hear to hear you miss many functions. For me the camera and bluetooth is working though. :S
Hall effect sensor is used to detect flip covers? I just use close proximity sensor on camera to turn off screen.
@NLSteve
NLSteve said:
Hi @volobobo, sorry to hear to hear you miss many functions. For me the camera and bluetooth is working though. :S
Hall effect sensor is used to detect flip covers? I just use close proximity sensor on camera to turn off screen.
Click to expand...
Click to collapse
Hi NLSteve, camera is really working? Bluetooth is also really working? I have paired with my bluetooth headphones. If so I will keep it a new try. Hall sensor was a misstake on M2, we have one proximity sensor.
Is SIM card working? My ports for other Phone works except sim card recognition.. Bad thing.. therefore I ask.. good to read that you make roms for the M2, which is not a current phone.
Gesendet von meinem SM-G900F mit Tapatalk
Ehy what about making an updated version?
What suprise - M2 isnt dead
Hi all,
since eragon give up because his broken phone, nothing is going forward with our M2,
always stuck on the old Android 5.
Now, we could make a jump to 7.1.
Only a test version by now, but nice to see, there are more options with this hardware.
Unfortunally, my camera changed from an resolution from 13 MP to 5,3 MP. The focus doesnt function (sharpness) in short distance under 50 centimeter.
I tried several camera apps in the last view days. But no one solved that problem.
I looked in the build.prop, but have really no idea, what i can do do rechange to 13 MP.
So, the camera is like dead, i cant get any acceptable pictures by now. :crying:
Have anybody an solution for this problem?
Thanks to all, spending so much time and energy, to keep this phone alive. :good:
Please anyone re-upload link.
Related
Greetings,
Enjoy this CM10 port for the Ideapad K1!!
Cheers,
- Krook1
Legal disclaimer: I'm not responsible if you brick your tablet, or have other damages in the process.
Features:
Wifi+GPS
HD video/audio
External SD
Gyro
Camera front/back
Bluetooth
Google Now with voice, Chrome
Internal SD (fixed in v2)
Paid apps (fixed in v2)
Auto brightness, Wifi button in notification bar (fixed in v3)
Overclock (1.2, 1.4Ghz) (v5)
USB Storage - MTP only (v5)
Tun.ko VPN support (v5)
3G (v5)
Rotate lock switch (v6)
Home button (v6)
Changelog:
v6.1- Tethering options, User controlled auto-brightness, Updated WiFi Driver (faster connects, no more WiFi SODs)
v6 - Updated to JZO54K/4.1.2, Integrated OC Kernel, BT fixed, Home Button(Home, PgUp, PgDn, Search), Rotation Lock Switch, apns.conf, Battery Stats
v5 - Separate 3G/Wifi images, OC, USB Storage, IP Tunneling/VPN support
v3 - Updated to JRO03L, auto brightness
v2 - Fixes the Internal/External SD card mounts to behave correctly, in normal and recovery mode.
v1 - Initial version with broken SD card functionality
Download links:
Download one of the two below depending on the method you have chosen.
a. CWM Flashable image v6.1:
Wifi (md5: b46a0a5fbe2a20718574b4d2b8eba233) http://www.multiupload.nl/MPKJA2ZSIL or http://www.load.to/ubCFHeCzLi/K1Wifi_CM10_Flashable_v6.1.zip
3G (md5: 7b91fb0631359f5df5f9e1d09a633648) http://www.multiupload.nl/34HM21W1OF or http://www.load.to/cxPyyF9hL6/K13g_CM10_Flashable_v6.1.zip
OR
b. NVFlash starter v2 (md5 d77a9508825132c25be0e9a24c3303c2) :
http://www.multiupload.nl/6ZRTH6VPKU
http://k1.androidfileshare.com/files/K1_CM10_JB_Starter_v2.zip
AND
c. Gapps :
No Picasa http://goo.im/gapps/gapps-jb-20121011-signed.zip
OR
With Picasa http://goo.im/gapps/gapps-jb-picasa-20121011-signed.zip
Install/Upgrade Procedure:
If coming from:
i. A previous version of this ROM:
1. Download a. above, and save to SD card
2. Long press power, select "Reboot" and then "Recovery"
3. Once in recovery, select the file to be flashed (no need to wipe, or flash gapps)
ii. A rom with working CWM with the new ICS kernel (version 2.6.39.4 - seen in About tablet in Settings)
1. Download a. and c. above
2. Enter recovery with the supported method on that rom
3. Wipe data, cache and dalvik-cache
4. Flash a., followed by c.
5. Reboot
iii. Any other rom
1. Download c. to your sdcard, and b. to your PC
2. Power down and enter APX mode on your tablet, with the USB cable connected to the PC
3. Run flash-win.bat or flash-linux.sh (depending on what your PC runs)
4. After table has booted, enter Recovery via long press of Power, and select "Reboot" then "Recovery"
5. Flash the gapps package that you downloaded in step 1.
6. Reboot
7. Perform Procedure i. above
If you are unsure, which of the options above, step c is recommended for first timers.
Issues/Workarounds/Tips:
- Incompatible apps Amazon mobile - Install Amazon App Store, and the Amazon Mobile from Amazon App Store - Camera-settings-Resolution will hang the camera app and will need a restart of the tablet to return to camera app again.
Install the "With Picasa" version of gapps to get the original non-CM10 camera that does not exhibit this bug. - Sleep Of Death (tablet wont wake-up) - Upgrade to v6.1
- Adobe Flash (as a browser plugin) does not work
This is not officially supported on Jelly Bean, nor will it be on any future versions of Android
You may sideload the ICS version from here http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html - Google Talk Video chat crashes
- Adjusting Light Sensor Levels crashes settings...
Settings > Display > Automatic Backlight > Light Levels (select Use Custom) > Edit Other Levels - Calculator force closes when you start it - Use a real calculator
- Setting - Launcher - Homescreen, when "Show dock divider" is unchecked and then hit the virtual Home button- "Unfortunately, Trebuchet has stopped."
This is a Trebuchet bug, hopefully an updated base will have it fixed.
Archive:
CWM Flashable image v6:
Wifi (md5: 35487a49a4a997c4faa0a4439c296e3c) http://www.multiupload.nl/PG487N45EW
3G (md5: 26415574183f96715e6ea9dd67c64ac9) http://www.multiupload.nl/MBY89TPSD1
CWM Flashable image v5:
Wifi (md5: 14b7fb7dca6977d8ad2a3ccef3ab38fc) http://www.multiupload.nl/RYSHP5H1OE
3G (md5:18690be10df0b506cee53362404c3e27 ) http://www.multiupload.nl/LCP60EJNCF
CWM Flashable image v3 (md5 b42fcb3cdcee04e3670bf3889e676f74):
http://k1.androidfileshare.com/files/K1_CM10_Flashable_v3.zip
http://www.multiupload.nl/YL2ISK9T95
OPTIONALLY
d. CWM Flashable Overclock Kernel (md5: 8508c3cefa2d9f019e284444a354b59f)
http://www.multiupload.nl/EDDU4ZX02Q
3G Test version:
http://www.multiupload.nl/JUTSIQAAXT
CWM Flashable image v2 (md5 7ad3df64d79fe7efb6913136e955e4c0):
http://www.multiupload.nl/NL4AEY3E7U
http://k1.androidfileshare.com/files/K1_CM10_Flashable_v2.zip
Thanks for your work!
Hi,
what about 3g? Is it functional?
Cheers, Jorge
Wow. Really awesome work. I get my ideapad today. Looks like by the end of the weekend ill have jelly bean on it.
Which apps are incompatible? Any google maps problems?
What great work you guys are doing.
Sent from my ST25i using xda app-developers app
Awesome work krook1! I didn't even know you were still around. You should join me in freenode room #ideapad-k1. I would like to work on an AOSP jellybean build.
No gapps with flash...
Should I have gotten Google play, gmail' sect. With this flash?
jfkerekes said:
Should I have gotten Google play, gmail' sect. With this flash?
Click to expand...
Click to collapse
Like all cm roms gapps are installed separately.
Grab the latest from RootzWiki here:
http://wiki.rootzwiki.com/Google_Apps
You'll want to grab the latest for 4.1.1 since this is Jellybean
^^ good thing you reminded this. I'd have flashed the ICS apps instead.
Great
I be a newbie on this could some one tellme how i can flash this rom, thanks in advance.
Thanks Khanning. Wondered if that was the case but couldn't seem to find a good DL link.
---------- Post added at 05:55 PM ---------- Previous post was at 05:05 PM ----------
Will the touch version of recovery work if installed from Rom Manager?
---------- Post added at 05:56 PM ---------- Previous post was at 05:55 PM ----------
Will the touch version of recovery work if installed from Rom Manager?
Flashed successfully.
All google apps working as far as I can tell.
Cameras working.
Most apps compatible. Cant really tell which ones arent cos all the ones I use are.
Smooth rotation.
Absolutely fantastic. Glad I returned my nexus 7 (and didnt try another replacement.
Thanks to Khanning and krook. I love you guys.
Sent from my ST25i using xda app-developers app
Jrincon_v said:
I be a newbie on this could some one tellme how i can flash this rom, thanks in advance.
Click to expand...
Click to collapse
Im in the process of creating an nvflash based package for you to be able to start clean.
Done: See OP
jorge.aragon said:
Hi,
what about 3g? Is it functional?
Cheers, Jorge
Click to expand...
Click to collapse
I think I included the right files for 3g to be functional, but I have a wifi only model.
I can definitely work with you to get it debugged, if you can give it a shot.
Before you flash, if you can collect both logcat and dmesg, on the ICS release from Lenovo, it will help debug much faster.
Its then just a matter of comparing what is not happening in the logcat/dmesg of this rom.
Thanks
Drop box has blocked your public links to th downloads
jfkerekes said:
Drop box has blocked your public links to th downloads
Click to expand...
Click to collapse
Going to try goo.im, unless someone has another server to host?
Having a major problem. Everything is working except I cant download purchased apps from the play store keeps saying 'couldnt install to sd or usb storage or something like that.
Google searched it but those fixes dont work.
Took out my sd card and reflashed through nvflash. Same problem and it even showed external sd as 0.00 bytes.
Big issue.....
Pls help....
krook1 said:
Going to try goo.im, unless someone has another server to host?
Click to expand...
Click to collapse
http://www.androidfileshare.com/ is the one Cybie was offering. It won't let you upload files >100mb until you create a login but it seems to work alright.
Is it possible that there is prmissions issue on the external SD card? I notced that I could not browse the external sd, or internal for that matter when connecting to my PC. n fact, other than the device eing detercted, I cannot browse anything on it and it does not show in My Computer.
gallahad2000 said:
http://www.androidfileshare.com/ is the one Cybie was offering. It won't let you upload files >100mb until you create a login but it seems to work alright.
Click to expand...
Click to collapse
Thanks gallahad2000. Ive added newer links in the OP, hopefully they survive!!
jfkerekes said:
Is it possible that there is prmissions issue on the external SD card? I notced that I could not browse the external sd, or internal for that matter when connecting to my PC. n fact, other than the device eing detercted, I cannot browse anything on it and it does not show in My Computer.
Click to expand...
Click to collapse
Yep, you're right. Will debug this evening. Not sure if its a permissions issue, Ill check it out.
While waiting for Euphoria marshmallow I did a test build for CM-13, so here it is.
If anyone want to take over this, I can help setting everything up.
Installation instructions:
Installing CM 13 for the first time, or coming from another ROM:
- Make sure you're running a proper working ClockworkMod-Recovery/Team Win Recovery Project for ext4 and with selinux support.
- Copy GApps and ROM ZIP to your SDCard
- Boot into Recovery
- Make a backup of your current rom just in case
- Wipe system, data, cache and dalvik-cache
- Flash CM zip from SDCard
- Flash GApps zip from SDCard (Don't reboot before installing this if you plan to use GApps)
- Reboot
- Don't restore system data using Titanium Backup!
- I don't recommend changing kernel.
Upgrading from an earlier version:
- Copy the ROM ZIP to your SDCard
- Boot into Recovery
- Wipe cache and dalvik-cache
- Flash the ROM zip from SDCard
- Reboot
Download:
ROM HERE
Recommended GAPPs HERE Don't use google stock package
Source:
Cyanogenmod: here
device_lge_p880: here
kernel: here
repo patches: here
Notes:
-Selinux is in permissive mode for now.You can change it to enforce by typing setenforce 1 in terminal.
-Wifi display(Screen cast) is disabled and it will not work with the old blobs that we have.
-I'm not trying to take ower for laufersteppenwolf. I use stock blobs and I'm just trying to help.
-I created this because someone shared the build in the Euphoria thread.
bugs:
-reboot to recovery
-after reboot "System process not responding" is displayed
-error "invalid number" after remote call disconnect
- Keyboard bug with open_GApps: After install of GApps, install attached cm-13.0-UNOFFICIAL-OpenGapps-keyboard_hotfix_5-16.zip to fix the FC of AOSP keyboard.
- video problems in default browser. Try a differnt browser.
- video preview in gallery have a green overlay, video playback is ok.
- some minor bugs in setting->performance
- (Perfomance is not great on this old phone)
-??
Please add signature faking patch!
Sometimes when I press the power button it opens up the camera app. Other than that it is stable and much faster than the stock ROM.
Great job. Keep it up!
--EDIT--
Also when the phone is charging the touch buttons are lighting up.
is it worth updating from euphoria? what changes
Thanks for creating a new thread :good:
ItsClobberinTime said:
Sometimes when I press the power button it opens up the camera app. Other than that it is stable and much faster than the stock ROM.
Great job. Keep it up!
--EDIT--
Also when the phone is charging the touch buttons are lighting up.
Click to expand...
Click to collapse
"Sometimes when I press the power button it opens up the camera app." It is feature on android 6.0, press power button twice and camera app open directly.
Overall this ROM is excellent.
Thanks for your support Alfa samsung.
Do you have a changelog for the new version @alfsamsung ?
What a great surprise. Again thanks for your dedication in developing this device.
I intsalled yesterday, installed with google keyboard via recovery, sometimes laggy but almost ready for daily driver. And I can say that M is better than L.
Thanks so much!!! Its nice to see there is still hope for my old and trusty phone
Works fine. Just a few reboots in 10 hours. Still can't get 100% deep sleep. Stopped a few services and it system update. Sleeps only 80%. Because of Android system .
any change log for cm-13.0-20160219-UNOFFICIAL-p880-beta.zip
Salman Al-Badgail said:
any change log for cm-13.0-20160219-UNOFFICIAL-p880-beta.zip
Click to expand...
Click to collapse
2 commits on github:
libsymbols: Shim load ril and camera libs. Remove libboringssl-compat
power: Add powerHAL (Based on asus flo powerHAL.)
maybe we get better changelog later
Why I can't see drivers when I connect the phone to pc ?
Edit :
I found the way,
developer options > Usb Config. > choose MIDI and ready to go
asgz said:
Why I can't see drivers when I connect the phone to pc ?
Edit :
I found the way,
developer options > Usb Config. > choose MIDI and ready to go
Click to expand...
Click to collapse
Did you find any bugs??
Very good for early build! Keep it up. I didn't test it enough. I can only say app launch speed is good but there is so much fps drop in apps.
Salman Al-Badgail said:
Did you find any bugs??
Click to expand...
Click to collapse
As usual working very smooth, all apps working fine.
Sometimes restart itself,
Wake up screen with sound button is working,
Gps is working,
sometimes beginning of call other person can't hear me, I can hear very clear.
after finishing call msg appear and says invalid number.
And for now I will not return to 5.1.1. After a few new vers. I believe that M will work better than other android vers. on our P880.
@alfsamsung, our last developer, I hope you will continiue developing.
Greetings
asgz said:
As usual working very smooth, all apps working fine.
Sometimes restart itself,
Wake up screen with sound button is working,
Gps is working,
sometimes beginning of call other person can't hear me, I can hear very clear.
after finishing call msg appear and says invalid number.
And for now I will not return to 5.1.1. After a few new vers. I believe that M will work better than other android vers. on our P880.
@alfsamsung, our last developer, I hope you will continiue developing.
Greetings
Click to expand...
Click to collapse
Thanks for replying, Did anyone had same bugs or extras???
Thanks for all @alfsamsung,you are a great guy and helpfull developper ,now ı'm trying cm 13
On my phone after switching on GPS power button stop working.
One restart for 2 days all the rest works very well.
After a few tests, I know that this is not problem with GPS, only applications which leave screen turned on.
Updated version of this ROM: [ROM][TMOBILE][S7_SM-G930T][Oreo 8.0 Rooted][WifiCalling]G930TUVU4CRI2
ROM last updated: 10/30/2018
Introduction:
HUGE thanks to the guys that got this going like root & figuring out hybrid stocks! This ROM is a complete rewrite of my ROM [ROM][TMOBILE][S7_SM-G930T][Oreo Rooted] That ROM doesnt have WifiCalling & I couldn't get it to work for the life of me, so I rewrote it. I started with stock, and slowly stepped back making changes, reinstalling each time, confirming it still worked. About 200 installs later & 1000s of changes, this is the result. Yes, it took a LONG time. Hope you enjoy it! Don't forget to say Thanks so I know it is actually helpful to others, and continue doing this!
Description:
Stock Tmobile Oreo 8.0 modified (G930TUVU4CRF1)
EXTREMELY debloated! Nearly bare minimum, while still retaining hardware functionality. Eg, Samsung Gallery & Camera exist so we get 4k recording, and there aren't errors when we pull up the Gallery to edit, etc. Yes, this means NO Samsung or Android Pay. There could be more apps to debloat but Im out of time for now! (Please provide suggestions if interested)
Everything possible I replace Samsung with Google
Solid ROM. It was actually kind of slow for me, but I'm curious how this works for others.
Xposed is part of the guide, which will give you infinite customization & tweak-ability
If you hate Samsung SW and just want a solid working ROM with very few install options to get you up and running this is for you.
This will delete all of your data on the phone! (Not external SD card) This is the only way so don't ask. Backup your data!
Features:
Tmobile Wifi Calling works, along with Visual Voicemail & Mobile Hotspot
Many Aroma Installer app options
(Optional) KevinsFavorites option in Aroma. I'm not sure I'd recommend it due to my tastes. If you're looking for some good common apps tho, it includes: Amazon, AmazonMusic, AquaMail, Gmail, GoogleDrive, GoogleKeep, GooglePhoto, Hangouts, IFTTT, Pandora, RootBrowserClassic, TitaniumBackup, Uber, & Wink (If you install these and want to remove them later, use TitaniumBackup (or similiar) to uninstall
Root Features: See Downloads->Recommended Root Zip & say Thanks!
Debloated
De-Knoxed
Decrypted /data/ partition
OTAs disabled
Speed & Build Prop Tweaks
Dual speaker
Ruthless Launcher
Apps
AdAway
AOD Clock Face Themes
CPUSpy
DisableService
Kernel Adiutor
Samsung Video Editor and Trimmer
Xposed
Many more...
Download Links:
Base.7z & Oreo_Kevin71246Modded_v3.#.#.zip
Installation:
This will delete all of your data! If you continue, you acknowledge that the Author is NOT responsible for anything that happens to your phone!
Summary (for Pros)
Flash Oreo stock
Root
Flashfire
Oreo_Kevin71246Modded_v3.1.##, Auto-mount, Mount /system read/write Option
Go through Aroma setup. When finished, it should boot to Recovery (if not do this). Do a "Wipe data/factory reset"->Reboot
Detailed Steps
Install Stock Oreo:
Download mode & Setup
Make sure you have latest device drivers setup on your PC
Enable USB Debugging on phone in Developer Settings
Boot phone into Download Mode:
Turn off your device
Press and hold Volume Down + Home + Power button
When you see the warning screen, release buttons & press Vol UP. Phone should say "Downloading..."
Download and unzip Base.7z to PC (This contains stock Oreo, ODIN, & root)
ODIN
Open ODIN on PC (\Base\Odin_313.exe)
Connect USB from PC to phone. ID:COM in Odin should turn Blue with a COM port
Select AP, BL, CP and CSC files from the \Oreo_Stock\Base\ folder for corresponding files
Select HERO2QLTE_USA_VZW.pit
Select Start
Finished: Phone will reboot & show Carrier screen for 3-5mins. Wait until Setup screen & go through quickly (bare minimum) since you'll wipe it again. Once in Android, go to Settings->Display->Screen resolution->WQHD->Apply
Root Instructions: (+Flashfire, SuperSU)
Reboot phone into Download mode
Odin
AP: Select \Base\Root\AP_SM_G930_OREO_ENG_BOOT.tar
Start-> Wait for phone to boot to Android OS
Root
Double-click \Base\Root\cmd-here.exe & Type: root.bat [enter]
Option: 1 (Install Root No tweaks) (Or pick whatever you want)
*Note: With this system root, do not update su binary. Disable notifications for SuperSU app. Don't flash any superuser zips in recovery that are not made by jrkruse
Install Custom Hybrid ROM & Xposed
Download & copy Oreo_Kevin71246Modded_v##.zip to phone
Flashfire
Open Flashfire on phone
Red + symbol->Flash Zip or OTA->Oreo_Kevin71246Modded_v#, Auto-mount, Mount /system read/write Option->Check mark
Click Lighting bolt at bottom-> OK
Phone will reboot to Aroma. Go through setup. (See above for what's in KevinsFavorites)
When finished, allow Aroma to exit.
It should reboot into Recovery (If not, do this: immediately hold Vol-Up btn+Home btn until you see recovery on screen. If you missed it, try again: hold Vol-Down+Pwr btn ~10sec until phone restarts & immediately hold Vol-Up btn+Home btn until you see recovery on screen.)
In recovery: Factory Reset->Yes->Restart phone
*Wait 5-10min on loading screens
Go thru Android setup. Ignore "Xposed Installer has stopped" error
Followup-Steps:
Set Dialer: Phone Settings->Apps->Menu->Default Apps->Calling App->Select Phone
Recommendations:
Xposed
Setup Xposed: Xposed Installer app:Install framework option & restart phone
Xposed Installer app: Settings button (3 lines)->Download->Search "GravityBox [O]"->Click it->Versions tab->Download->Install->Back arrow (upper left)->Settings->Modules->Check box next to GravityBox [O]->Restart phone
GravityBox [O] Tweaks: (Open GravityBox app)
Battery indicator: Statusbar tweaks->Battery settings->Turn on Master switch->Battery indicatory style: None->Battery percent text...->Back
Clock: Statusbar tweaks->Clock settings->Turn on Master switch->Center clock...
Firefds Kit [O] Tweaks: (Install same way as Gravity box)
This is a supplement to Gravitybox. Things of note: Advanced power menu, call recording, & disable bluetooth toggle popup, etc
Known Issues:
Visual Voicemail may fail to register, but restart phone and give it a few hours. It works eventually.
RCS (Rich Communication Services/AdvancedMessages/Chat) texts don't show up in Android Messages & Textra, etc apps (This is an issue on stock as well!!)
Fix: (Use Samsung Messages)
How to Install Samsung Messages via ADB (Easiest way though is just reinstall!):
Download Messaging_SEP81.zip, unzip, & manually copy apk to phone via usb/Windows My Computer
adb shell (Get into shell to run beow commands)
su (Run as root)
mount -o rw,remount /system (Mount system read/write since default it read-only)
chmod 755 /system/priv-app/Messaging_SEP81 (Set permissions on folder)
chmod -R 644 /system/priv-app/Messaging_SEP81 (Set permissions on apk file)
ls -l /system/priv-app/Messaging_SEP81 (Check permissions - Should be: -rw-r--r-- 1 root root - not sure what 1 & 2 is)
ls -l /system/priv-app | grep "Messaging" (Check permissions - Should be: drwxr-xr-x 2 root root)
reboot (Reboot device)
Changelog:
Version 3.1.32: First stable build
Ver 3.1.36:
-Disabled encryption on /data/ partition to resolve "Bluetooth paired devices deleted after reboot" issue & so mods play nicer with ROM
-Fixed "Device not supported" error on Google Phone app
Ver 3.1.37:
-Added most of the apps I replaced or added as options in Aroma Installer now
Credits:
- @jrkruse & @klabit87 for Root
- @partcyborg for helping jrkruse
- @jrkruse for his similar ROMs as guides & help
- @Lanc-City for assistance in ROM modding
- @gustco for eng boot.img
- @Raymonf for modified odin
- @amarullz for Aroma Installer
- @Chainfire for FlashFire & SuperSU
- @rovo89 for Xposed
- @JaeKar99 for the cool & colorful boot animation
- @mrRobinson for AdAway ADAway.org
- Brandon Valosek for CPUSpy
- WangQi for DisableService
- Willi Ye for Kernel Adiutor
- @shubby for Ruthless Launcher
- @Craz Basics for Dual Speaker Mod
...
- Please PM me if you were forgotten!
Some screenies:
Saved2
Saved3
Well nice job!
jrkruse said:
Well nice job!
Click to expand...
Click to collapse
...but your'e the best! (You & I both know I couldnt have done it without all your other work!)
Once I FINALLY got WifiCalling to work, I thought... Imagine ALL the S7 XDA members out there with crappy Tmobile signal across Rural America that could TOTALLY use Wifi Calling!!! Haha, but seriously!! & that thought was the birth of this thread
kevin71246 said:
...but your'e the best! (You & I both know I couldnt have done it without all your other work!)
Once I FINALLY got WifiCalling to work, I thought... Imagine ALL the S7 XDA members out there with crappy Tmobile signal across Rural America that could TOTALLY use Wifi Calling!!! Haha, but seriously!! & that thought was the birth of this thread
Click to expand...
Click to collapse
Is this Ufirm firmware?
jrkruse said:
Is this Ufirm firmware?
Click to expand...
Click to collapse
I have so many FW packages on my PC at this point, from so many places that I used while trying to get this to work, but I think it might be a package from one of your threads(?) Since I'm not exactly sure what you're asking regarding "Ufirm FW", I'll elaborate hoping that answers your question. (Tho I'm thinking you mean the U variation/unlocked. So based on these stock files below I guess the answer is no.) If you're question is really, "is it possible to get tmobile wifi calling to work on a U model #", then I'd have to really think about that. But at this point I don't have an answer. I can tell you a million dependencies about it tho! (I seriously have hundreds of revisions I made while testing, & notes. The symbolic & meta links in Aroma initially broke it, as I found out after a week or so of testing - wish I knew a bit more about them, and why they're all there, then I'd know what was wrong about them...)
High-level process:
1)Flash Base/Stock/Oreo Rom:
- AP_G930TUVU4CRF1.tar
- BL_G930TUVU4CRF1.tar
- CP_G930TUVU4CRF1.tar
- CSC_TMB_G930TTMB4CRF1.tar
- HEROQLTE_USA_VZW.pit
2)Root with your method
3)Flash Xposed framework & my ROM (it's a "start with stock then remove what we don't want" type of Aroma/Edify script)
jrkruse said:
Is this Ufirm firmware?
Click to expand...
Click to collapse
BTW, any idea how to prevent the "verification failed" error I mention in the OP steps, after flashing Xposed framework? I tried flashing dm-noverity but no luck. At least my guide covers it at this point tho... Thanks again
kevin71246 said:
BTW, any idea how to prevent the "verification failed" error I mention in the OP steps, after flashing Xposed framework? I tried flashing dm-noverity but no luck. At least my guide covers it at this point tho... Thanks again
Click to expand...
Click to collapse
If you choose the keep safestrap option during root the it will flash the system/vendor/etc/ fstab.qcom that totally removes data encryption but when that fstab.qcom is flashed it also requires a data wipe for phone to boot then when you install xposed you won’t see that error but either way you end up wiping data so your choice
Sent using some kind of device I modified
It works perfectly!!
I have not had any problems so far, here I leave you for the link to download and try those who are interested in VIPER4ANDROID: https://drive.google.com/file/d/1572ORe6TOrsRBuxWWBChH-WMnxkvcUjH/view?usp=drivesdk
You just have to flash it with Flashfire, but if you do not pull them, let me know Thank you very much !!! Kevin for the effort!
---------- Post added at 10:17 PM ---------- Previous post was at 10:15 PM ----------
I have not had any problems so far, here I leave you for the link to download and try those who are interested in VIPER4ANDROID: https://drive.google.com/file/d/1572ORe6TOrsRBuxWWBChH-WMnxkvcUjH/view?usp=drivesdk
You just have to flash it with Flashfire, but if you do not pull them, let me know Thank you very much !!! Kevin for the effort!
First, I want to thank you so much kevin71246. I tried your previous version as I was sick and tired of how sluggish my phone felt after the last two T-Mobile OTA updates. So far the experience on the phone has been great but I wanted to post about an issue I had with that version to see if anyone else has come across it or can figure out what is going on. The reason I am making this a reply in this thread instead of your other is because I will be flashing this update shortly but I want to get the ball rolling on the issue first.
I went through the whole process, installing the minimum with Google Apps, though I did restore everything previously installed once I log in with my Goggle Account. I am unsure if this contributed to the problem but I will not be restoring apps on the next try. It seems no matter what process I attempt to connect my Ticwatch E to my S7 the Wear OS app will not recognize it which causes the watch to get stuck in the setup phase, making it useless. This was after multiple and different connection attempts, resets, reboots and factory (watch only) restores. The watch will show up under bluetooth and create the initial connection but it will not stay connected. Anyone have any idea? Is this ROM missing something?
Edit: Mid way through the install, I wanted to note that I checked for the issue after doing the "Install Stock Oreo" but before Root and everything worked as it should. Wear OS sees the watch instantly and Bluetooth connects fine.
Edit: So I am a day into using the ROM and I am still having issues. While it will connect and work perfectly fine now, when ever I do a reboot of the phone the watch no longer connects. I will just get constant Bluetooth Connection Requests, every single time the watch tries to get data, and it never actually connects. To fix this I need to do a complete reset of the watch and do the whole setup process again. As you can imagine this is no good, expecting to wipe my watch every time my phone reboots makes it still almost useless.
charredchar said:
First, I want to thank you so much kevin71246. I tried your previous version as I was sick and tired of how sluggish my phone felt after the last two T-Mobile OTA updates. So far the experience on the phone has been great but I wanted to post about an issue I had with that version to see if anyone else has come across it or can figure out what is going on. The reason I am making this a reply in this thread instead of your other is because I will be flashing this update shortly but I want to get the ball rolling on the issue first.
I went through the whole process, installing the minimum with Google Apps, though I did restore everything previously installed once I log in with my Goggle Account. I am unsure if this contributed to the problem but I will not be restoring apps on the next try. It seems no matter what process I attempt to connect my Ticwatch E to my S7 the Wear OS app will not recognize it which causes the watch to get stuck in the setup phase, making it useless. This was after multiple and different connection attempts, resets, reboots and factory (watch only) restores. The watch will show up under bluetooth and create the initial connection but it will not stay connected. Anyone have any idea? Is this ROM missing something?
Edit: Mid way through the install, I wanted to note that I checked for the issue after doing the "Install Stock Oreo" but before Root and everything worked as it should. Wear OS sees the watch instantly and Bluetooth connects fine.
Edit: So I am a day into using the ROM and I am still having issues. While it will connect and work perfectly fine now, when ever I do a reboot of the phone the watch no longer connects. I will just get constant Bluetooth Connection Requests, every single time the watch tries to get data, and it never actually connects. To fix this I need to do a complete reset of the watch and do the whole setup process again. As you can imagine this is no good, expecting to wipe my watch every time my phone reboots makes it still almost useless.
Click to expand...
Click to collapse
I believe I know what the issue is, I'm testing a fix (for THIS ROM) as we speak. Stay tuned. Maybe tomorrow if I have time and it works I'll update the OP. BTW, this ROM and my other ROM are TOTALLY different. Thanks for the feedback!
FranMLG said:
I have not had any problems so far, here I leave you for the link to download and try those who are interested in VIPER4ANDROID: https://drive.google.com/file/d/1572ORe6TOrsRBuxWWBChH-WMnxkvcUjH/view?usp=drivesdk
You just have to flash it with Flashfire, but if you do not pull them, let me know Thank you very much !!! Kevin for the effort!
Click to expand...
Click to collapse
What do you mean by this? "but if you do not pull them, let me know"
And tell me more about Viper4Android, and if it works solid for you on this ROM...then I'll consider adding it. Thanks!
New version, see change log in OP for details.
Yeah i.a give this a shot in a little. Do I need to root phone or can I just flash through Odin. Sorry not used to this locked bootloader crap..... s8crj1 are the last 6 digits of the software I'm on. I did receive the latest update will this effect me installing this. Sorry as I said not used to this locked bootloader crap.
jrkruse said:
If you choose the keep safestrap option during root the it will flash the system/vendor/etc/ fstab.qcom that totally removes data encryption but when that fstab.qcom is flashed it also requires a data wipe for phone to boot then when you install xposed you won’t see that error but either way you end up wiping data so your choice
Sent using some kind of device I modified
Click to expand...
Click to collapse
Hi, why you have to flash this - HEROQLTE_USA_VZW.pit on 930t, is it ROM specified? if I do and don't then what are pro and cons?
---------- Post added at 01:36 PM ---------- Previous post was at 01:26 PM ----------
josh2020glacier said:
Yeah i.a give this a shot in a little. Do I need to root phone or can I just flash through Odin. Sorry not used to this locked bootloader crap..... s8crj1 are the last 6 digits of the software I'm on. I did receive the latest update will this effect me installing this. Sorry as I said not used to this locked bootloader crap.
Click to expand...
Click to collapse
since bootloader is locked you can't use TWRP so you have to use Flashfire to install this ROM, as you know flashfire required root so you have to setup the base per OP and then root the base then install the ROM and then root it again, read the first page I don't think you will get a instructions more detailed then his
Okay so I just realised I was posting comments on the old thread, my bad. Coming back to the question, can the boot animation be changed? I've messed with the qmg files in an attempt to replace the weird, nauseating rainbow animation but even after overwriting the latter, it persists. Looking forward to a reply kek
Alkan3 said:
Okay so I just realised I was posting comments on the old thread, my bad. Coming back to the question, can the boot animation be changed? I've messed with the qmg files in an attempt to replace the weird, nauseating rainbow animation but even after overwriting the latter, it persists. Looking forward to a reply kek
Click to expand...
Click to collapse
Nauseating rainbow? LOL. Sorry. This is much more of a general question though, that wouldn't exactly pertain to this ROM specifically. And given I don't have an answer, I'd try searching BootAnimation How-Tos to get this customized. The ONLY thing I did regarding this was replaced the existing files with the rainbow ones. That's it. Apologies in advance.
Just discovered an issue: RCS (Rich Communication Services / Chat) texts don't show up in Android Messages app. See "Known Issues" in OP for a solution. BTW I posted a new ROM version a few days back that allows many choices in Aroma Installer. Make sure to pick Samsung Messages (instead of Google), so you get RCS chat text messages!
This is an unofficial build of LineageOS 16.0 for the Motorola razr I, (XT890/SMI).
Lots of thanks to Hazou. This rom is based on his los-14 rom and I got help from him with los-16.
This rom has full hardware support and should run stable. It has been tested by me in daily use. I'm using the rom without google apps, but with microg. Installing google apps requires some apps to move to data partition because of limited system size. See install description for more info.
Special Features
-All features of Hazous 14.1 rom
-MicroG signature spoofing patch is included.
-Adaptive icons can be disabled in homescreen settings.
I can include more features if requested
Known Bugs
-The camera preview image sometimes shakes at random
Download
https://mega.nz/#F!5fBWlIAQ!Jlq9Bj789iJ0iIIptK00tg
Update
If you already run an earlier version of this rom, just boot to twrp and install the latest flashable zip file
Install
1. Backup everything you don't want to loose.
2. Download and install TWRP 3.2.3 (download in attachments. Can be flashed with fastboot or with another recovery)
3. If you come from another rom do a full wipe with twrp
4. Download and install the rom flashable zip (download from mega.nz link is in section download)
5. If you want to install opengapps or need system partition space for other things. Install the move_to_data.zip file from the attachments. This will move the Webview and the LatinIME app to data partition.
6. Choose one of the following options:
-either install google apps (download form https://opengapps.org/. Choose x86 9.0 nano or pico)
-or install MicroG (can be installed with the unofficial installer https://forum.xda-developers.com/android/development/microg-unofficial-installer-t3432360) this is lighter in ram and cpu usage but you will get problems with google chrome and other apps
7. If you want root access install the addonsu-16.0-x86.zip (download in the attachments)
8. Reboot the phone. First reboot will take some time
Changelog
Code:
20191018:
fixed problem with sms receiving
20191012:
mobile network connection works now after boot
Fixed problems with network switching
Show taps option is working now
intel art extension enabled
Call recording enabled
text relocation warnings disbaled
(untested) encryption. Needs special configuration (see below)
20190819:
SELinux is now enforcing
Notification access feature enabled
solved crashes with houdini emulated apps
20190713:
usb configuration works properly
battery light works now
July security patches
20190704:
first stable release of this rom
DATA Encryption
If you want to enable data encryption this would break the pds partition backup. To prevent this, the cache partition can be used as backup location:
-edit /system/bin/pdsbackup.sh
-change PDS_FILE=/data/misc/pds/pdsdata.img to PDS_FILE=/cache/misc/pds/pdsdata.img
-resize data partition in TWRP:
Code:
umount /data
umount /sdcard
e2fsck -f /dev/block/mmcblk0p17
resize2fs /dev/block/mmcblk0p17 1367079
-reboot the phone
XDA:DevDB Information
unonfficial LineageOS 16.0, ROM for the Motorola RAZR i
Contributors
julianwi, Hazou
Source Code: https://github.com/julianwi/android_device_motorola_smi/tree/lineage-16.0
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.0.x
Based On: LineageOS
Version Information
Status: Stable
Stable Release Date: 2019-08-19
Created 2019-07-04
Last Updated 2019-08-19
This if I did not expect it, I'll try to see how it goes. Thank you.
Download links and install description are up now. Download from mega.nz because xda download section is broken at the moment. I'm waiting for your test reports
It's really great works, thank you!!
I quickly tried and found several points.
- USB connection with PC
All USB connection option including File Transfer, USB tethering, PTP are grayed out.
Disabling/Enabling android debug in setting didn't work.
- Wifi with storage encryption
When you enable storage encryption, WiFi always become disabled, not be able to enable.
Just FYI, it required deleting /system/bin/pdsbackup.sh AND reducing partition size of 'data' (/dev/block/mmcblk0p17).
- SElinux
Although it is designated as permissive in device.mk, it's actually worked as "disabled".
I'm not sure it's related or not, however, when building "user build", it's failed with "ERROR: permissive domains not allowed in user builds".
I know "user build" is not officially supported in Lineage release, however, it's really helpful if we can do it for AFW usage.
Previously I could use Lineage 14.1 smi build for AFW and safetynet app with user build.
BTW, performance is really great, seems to be almost same as Lineage 11.
dumkm said:
It's really great works, thank you!!
I quickly tried and found several points.
- USB connection with PC
All USB connection option including File Transfer, USB tethering, PTP are grayed out.
Disabling/Enabling android debug in setting didn't work.
Click to expand...
Click to collapse
I also noticed that. Will see how this can be fixed. It is just a problem with the option dialog. Usb connection works fine. As a workaround you can set a default USB configuration in developer options
dumkm said:
- Wifi with storage encryption
When you enable storage encryption, WiFi always become disabled, not be able to enable.
Just FYI, it required deleting /system/bin/pdsbackup.sh AND reducing partition size of 'data' (/dev/block/mmcblk0p17).
Click to expand...
Click to collapse
I have not tested storage encryption yet. Will have a look at it later
dumkm said:
- SElinux
Although it is designated as permissive in device.mk, it's actually worked as "disabled".
I'm not sure it's related or not, however, when building "user build", it's failed with "ERROR: permissive domains not allowed in user builds".
I know "user build" is not officially supported in Lineage release, however, it's really helpful if we can do it for AFW usage.
Previously I could use Lineage 14.1 smi build for AFW and safetynet app with user build.
Click to expand...
Click to collapse
I think lineage trust doesn't differentiate between permissive and disabled. Selinux support is planned for future releases
Thank you for quick check.
Regarding USB connection, I also confirmed that Ubuntu can recognize as external storage with above option, besides Windows still does not recognize. Maybe depending on my environment.
Also I noticed that Chrome, Chrome Beta and Chrome Canary (therefore another Chrome based apps such as Maps Go) always crash. This is also maybe my environment only, though. BTW, I could install MicroG, besides couldn't install OpenGapps 9.0 pico due to partition size limit.
Additionally, I couldn't find any LED settings, currently LED is always off during charge or any notification.
dumkm said:
Thank you for quick check.
Regarding USB connection, I also confirmed that Ubuntu can recognize as external storage with above option, besides Windows still does not recognize. Maybe depending on my environment.
Also I noticed that Chrome, Chrome Beta and Chrome Canary (therefore another Chrome based apps such as Maps Go) always crash. This is also maybe my environment only, though. BTW, I could install MicroG, besides couldn't install OpenGapps 9.0 pico due to partition size limit.
Additionally, I couldn't find any LED settings, currently LED is always off during charge or any notification.
Click to expand...
Click to collapse
Notification Led should work. Can be configured under settings->apps and notifications->notifications->notification light. I don't know what happened with the battery light. It will hopefully come back if I upgrade the driver to hidl.
Google Chrome is a known problem with MicroG. It requires official gapps. I will check if some of the unprivileged lineage apps can be moved to data partition to make place for google apps
Newbie question
Hi all, I know someone who's selling her old RAZR i XT890 and I'm interested (for experimental reasons but also the oddity that it's Intel powered). I've never owned a RAZR i so I've got some questions:
-The phone is from 2012 so quite old and has 1GB RAM, does it work well with this Lineage 16? Because usually newer software would perform bad on older SoC (I used to have iOS 7 on iPhone 4 back in the day and it was painfully slow compared to 6).
-On Lineage 16, can it run any Android app as a standard new Android Pie phone? I ask because this is an Intel x86 CPU, so can it still run Android apps as normal or are most of them only designed for ARM and therefore unusable?
If I get the good news, I may buy the phone and try this Lineage OS custom ROM.
Regarding LED, maybe it became working after modifying some option of notification light. Battery connection light is still always off.
Regarding opengapps, I moved webview and LatinIME from app directory to external SD in TWRP, then installed as normal app after system boot. Webview worked fine besides LatinIME always crash. I'm using different IME, so it's no problem. With this environment, opengapps nano can be installed, then Chrome, Maps and other google apps worked.
dumkm said:
Regarding LED, maybe it became working after modifying some option of notification light. Battery connection light is still always off.
Regarding opengapps, I moved webview and LatinIME from app directory to external SD in TWRP, then installed as normal app after system boot. Webview worked fine besides LatinIME always crash. I'm using different IME, so it's no problem. With this environment, opengapps nano can be installed, then Chrome, Maps and other google apps worked.
Click to expand...
Click to collapse
That's good. Than we can make a flashable zip to automatically move and symlink them to data partition.
I will provide a new build till end of the week with improved usb and notification LED implementation. I already got it working in my local setup
flameseewa said:
Hi all, I know someone who's selling her old RAZR i XT890 and I'm interested (for experimental reasons but also the oddity that it's Intel powered). I've never owned a RAZR i so I've got some questions:
-The phone is from 2012 so quite old and has 1GB RAM, does it work well with this Lineage 16? Because usually newer software would perform bad on older SoC (I used to have iOS 7 on iPhone 4 back in the day and it was painfully slow compared to 6).
-On Lineage 16, can it run any Android app as a standard new Android Pie phone? I ask because this is an Intel x86 CPU, so can it still run Android apps as normal or are most of them only designed for ARM and therefore unusable?
If I get the good news, I may buy the phone and try this Lineage OS custom ROM.
Click to expand...
Click to collapse
Newer android versions have been designed while keeping low ram devices in mind. Ram hungry special features like the picture in picture mode are excluded from builds for older device. So the situation is much better then on iOS. But a newer phone would run better thought.
Most android apps are available for x86. But some are still arm only and get automatically emulated. The intel houdini emulator integrates these apps natively into the system but they are a bit slower then x86 apps. These are for example Skype and a few unity based games
julianwi said:
Newer android versions have been designed while keeping low ram devices in mind. Ram hungry special features like the picture in picture mode are excluded from builds for older device. So the situation is much better then on iOS. But a newer phone would run better thought.
Most android apps are available for x86. But some are still arm only and get automatically emulated. The intel houdini emulator integrates these apps natively into the system but they are a bit slower then x86 apps. These are for example Skype and a few unity based games
Click to expand...
Click to collapse
Thanks for the response. So I should be alright with it then, hopefully. I just hope it won't lag on that old SoC. I'd love if you could upload a quick video of it in action.
TWRP error 70
julianwi said:
This is an unofficial build of LineageOS 16.0 for the Motorola razr I, (XT890/SMI).
Lots of thanks to Hazou. This rom is based on his los-14 rom and I got help from him with los-16.
This rom has full hardware support and should run stable. It has been tested by me in daily use. I'm using the rom without google apps, but with microg. I don't know how smooth it runs with official gapps.
Special Features
-All features of Hazous 14.1 rom
-MicroG signature spoofing patch is included.
-Adaptive icons can be disabled in homescreen settings.
I can include more features if requested
Known Bugs
-Mobile cell connection doesn't connect after boot. You have to turn airplane mode on and off to let it work.
-selinux is set to permissive for now (reduced security)
Please report more bugs if you test this rom
Install
1. Backup everything you don't want to loose.
2. Download and install TWRP 3.2.3 (download in attachments. Can be flashed with fastboot or with another recovery)
3. If you come from another rom do a full wipe with twrp
4. Download and install the rom flashable zip (download from mega.nz https://mega.nz/#!ICwXRC6D!VZqe3o5zeWbmMiZvka_BtUTW5T_V7_OdMS57Oe9CbMk)
5. Choose one of the following options:
-either install MicroG (can be installed with the unofficial installer https://forum.xda-developers.com/android/development/microg-unofficial-installer-t3432360)
-or install google apps (download form https://opengapps.org/. Choose x86 9.0 pico)
6. If you want root access install the addonsu-16.0-x86.zip (download in the attachments)
7. Reboot the phone. First reboot will take some time
XDA:DevDB Information
unonfficial LineageOS 16.0, ROM for the Motorola RAZR i
Contributors
julianwi, Hazou
Source Code: https://github.com/julianwi/android_device_motorola_smi/tree/lineage-16.0
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.0.x
Based On: LineageOS
Version Information
Status: Stable
Stable Release Date: 2019-07-04
Created 2019-07-04
Last Updated 2019-07-05
Click to expand...
Click to collapse
I've installed the OS without problems, but when i try to get GApps Pico or any other version TWRP prompt error 70. How should i proceed? There is any additional configuration needed?
Kazvko said:
I've installed the OS without problems, but when i try to get GApps Pico or any other version TWRP prompt error 70. How should i proceed? There is any additional configuration needed?
Click to expand...
Click to collapse
Yes, system partition size is limited on this phone. To install GApps some files need to be moved to data partition.
I created a flashable zip to automate this process. Take a look at the modified install description in the first post
New build is up now.
flameseewa said:
Thanks for the response. So I should be alright with it then, hopefully. I just hope it won't lag on that old SoC. I'd love if you could upload a quick video of it in action.
Click to expand...
Click to collapse
Sorry don't have enough time to make a video in the near future. Maybe someone else can record a video of it
I could confirm that notification LED and USB storage works fine with lineage-16.0-20190713-UNOFFICIAL-smi. Thanks.
Still WiFi with storage encryption does not work.
julianwi said:
New build is up now.
Sorry don't have enough time to make a video in the near future. Maybe someone else can record a video of it
Click to expand...
Click to collapse
Alright, thanks. I bought my friend's RAZR i and I am planning to use it as a daily driver with this ROM (I'm a light user anyway), I can't thank you enough for making this LineageOS for such an old device. I wonder if such a recent Lineage has been developed for the 2011 Atrix, haven't seen one.
I have questions though, firstly I've never used a custom ROM before, can I simply follow the instructions on this thread to get it working, or is there anything that has to be done beforehand like rooting? Secondly, are any other OSs successfully booting on this x86 phone, as I can't find it on XDA? (it surprisingly hasn't gotten much attention as a hackable device like HTC HD2 or Nokia N900 got).
dumkm said:
I could confirm that notification LED and USB storage works fine with lineage-16.0-20190713-UNOFFICIAL-smi. Thanks.
Still WiFi with storage encryption does not work.
Click to expand...
Click to collapse
I know, haven't looked at the storage encryption for now. It will maybe be in the next update next month
flameseewa said:
Alright, thanks. I bought my friend's RAZR i and I am planning to use it as a daily driver with this ROM (I'm a light user anyway), I can't thank you enough for making this LineageOS for such an old device. I wonder if such a recent Lineage has been developed for the 2011 Atrix, haven't seen one.
I have questions though, firstly I've never used a custom ROM before, can I simply follow the instructions on this thread to get it working, or is there anything that has to be done beforehand like rooting? Secondly, are any other OSs successfully booting on this x86 phone, as I can't find it on XDA? (it surprisingly hasn't gotten much attention as a hackable device like HTC HD2 or Nokia N900 got).
Click to expand...
Click to collapse
If the phone never had a custom rom yet, you have to unlock the bootloader first. Description is in this thread: https://forum.xda-developers.com/showthread.php?t=1928551
julianwi said:
If the phone never had a custom rom yet, you have to unlock the bootloader first. Description is in this thread: https://forum.xda-developers.com/showthread.php?t=1928551
Click to expand...
Click to collapse
That's an old guide, will everything still work?
flameseewa said:
That's an old guide, will everything still work?
Click to expand...
Click to collapse
Yes, it should still work the same. If some links are outdated you can google them yourself
Thank you for bringing my old RAZR i back to life! I really appreciate the time and effort you spent for this obselete phone. Looking forward for more updates and for a bug free ROM. Using it now
dumkm said:
- Wifi with storage encryption
When you enable storage encryption, WiFi always become disabled, not be able to enable.
Just FYI, it required deleting /system/bin/pdsbackup.sh AND reducing partition size of 'data' (/dev/block/mmcblk0p17).
Click to expand...
Click to collapse
I'm not sure if I misunderstood but when you said "it required deleting....." and "reducing partition size of data", did you mean you can get WiFi to work if you do those things? I'm no expert at these but I can atleast apply the "fix" (if it really is) given that you guide me, if it's okay with you. Thanks!
Hi all:
Here is a LineageOS 17.1 ROM for Z5 compact (suzuran).
Download 2022-09-11
This is a 7z archive with the zip'ed rom and the md5 file in it. Please unpack this archive, copy the included two files somewhere to your device, reboot into TWRP and flash this zip file. Enable md5sum checking. The zip file itself is not signed, so you have to disable zip verification.
Kernel sources
Tree sources
Features:
OS Version: 10.0 (Q)
Kernel: Linux 3.10
Kernel 3.10.108
New: Android security patch level: 5 September 2022
Using sony blob's from stock version 32.4.A.1.54
Memory issues finally fixed!
Battery consumption significantly reduced! For further reduction, please follow these instructions.
Google Pay does not give an error when starting the app. This does not mean, that payment is working. I can't test it, because I don't use this feature at all. Please report if it's working or not.
Updated aptX encoder blobs.
P2P-Crashes fixed.
Important informations:
You should be familiar with general installation of custom ROMs.
Required for installation: TWRP 3.2.1 (pick the version from 2018-02-23!!!) There is a version 3.2.3 out there, but with that version I had problems to restore my backups. 3.2.1 is just working perfect for me!
OR use my self built TWRP-version 3.6.2!
This ROM needs a clean install, old /data may cause problems!
This ROM is NOT pre-rooted.
It is highly recommended that your device is running (or HAS RUN in the past!) the latest stock ROM from Sony (32.4.A.1.54) before flashing this ROM.
Otherwise the baseband files may not match.
Working:
Bluetooth
Camera; both built-in camera (Snap) and 3-rd party camera apps.
Snap may be a little bit laggy, please use 3-rd party camera app instead; for example OpenCamera. If you're running into errors, please report.
Enforced SELinux support (see attached screenshot)
Fingerprint
FM-Radio
GApps (pick this version: ARM64, 10.0, pico [tested])
German app AusweisApp2 working (see this post)
GPS
Headset
LiveDisplay (see attached screenshots)
Location services
Notification LED
Offline charging
Phone calls (see attached screenshot)
SafetyNet test passed successfully
Signed build
SMS
Torch
WiFi
These things are NOT (or badly) working:
Camera focus at low distances.
Encryption
Payment
Streaming (mirroring)
VoLTE
Maybe some more things are not working.
If you have problems with GApps:
Sometimes the SetupWizard of GApps crashes on and on. Then you have to boot into TWRP, mount system, and go into terminal, where you have to delete SetupWizard (see screenshots):
Code:
cd /system/system/priv-app
rm -rf SetupWizard
Reboot.
Use this rom at your own risk! It comes without any warranty! I'm not responsible for any damage! If you don't agree with that, don't try to flash this rom in any way.
Benefits:
Added F-Droid and UnifiedNLP! If you don't want this, simply de-install it.
I've set maximum speaker volume to a higher value.
I've increased microphone gain.
I've changed the microfone gain to avoid echo in phone calls.
Changelog
Troubleshooting:
If you're running into an error, please search in this thread if this error is already posted, before you post it again!
If not, I need a LOG to see what went wrong. Without a LOG I can't help you!
A LOG can be fetched by connecting the device with an USB cable to your PC and then by typing these commands line by line:
Code:
adb root
adb shell logcat -b all -d > logcat
Send my this LOG file via PM.
If you think this could be a SELinux related issue, please try to set the device to permissive mode first.
If the issue is gone, I need the policy file too (plus LOG). Fetch it by typing this line in a terminal:
Code:
adb pull /sys/fs/selinux/policy
If you stuck in a bootloop you can fetch a LOG with this trick:
Press the power button and the volume up button together until the device shuts down.
HOLD the power button.
Release the volume up button and press the volume down button immediately after releasing the volmue up button.
The device should start into TWRP recovery.
Tap on "Advanced", then on "Terminal" and enter these commands line by line:
Code:
cd sys/fs/pstore
cp * /sdcard
Send me the copied file(s), if any, via PM.
Hi Bernie,
First things first : Thank you so much for your amazing work on this device.:highfive:
So hard to find a good, compact and up to date smartphone.
So i tried your Los17.1 and i just noticed another issue : ram usage.
Without nor the gapps neither other apps installed, the system is using 1.6go ram (even the keyboard can take time to appear once you launch an app)
On your Los14.1 (i tried with the last one you created, a few days ago) : it would be something like 0.8go ram (so everything run smoother) still without gapps and other apps / settings.
Maybe, now our days, 3go ram is mandatory for android + gapps + 3rd party ...
Ryu--X said:
So i tried your Los17.1 and i just noticed another issue : ram usage.
Without nor the gapps neither other apps installed, the system is using 1.6go ram (even the keyboard can take time to appear once you launch an app)
Click to expand...
Click to collapse
I know about that. I've tried with gapps and I can confirm that ram is running out of free space. Sometimes the system is not responding any more (screen is flickering and it seems that nothing happens) and I have to restart it (press power button quite a long time until power menu appears).
It is indeed far away from being a daily driver... :angel:
Another issue: It seems that location services (gps) are not working.
Does anybody confirm that?
Although Bernard warmed us that this ROM is not precisely ready yet, I tried to give it a go, Twice, already. At each time, some variations: with and without gapps (Pico and Nano), via the recommended TWRP and the 3.3.1 one. The result is always the same: after the language selection, my phone reboots on the 'Just a sec', endlessly. I have to restore a nandroid backup, on order to have a working phone again.
Sent from my Xperia Z5 Compact using XDA Labs
Berni-0815 said:
It is indeed far away from being a daily driver... :angel:
Another issue: It seems that location services (gps) are not working.
Does anybody confirm that?
Click to expand...
Click to collapse
I can confirm that unfortunately GPS isn't working.
By the way, i saw many other good roms on many devices ... that had an alpha rom far worse than this one
casouzaj said:
Although Bernard warmed us that this ROM is not precisely ready yet, I tried to give it a go, Twice, already. At each time, some variations: with and without gapps (Pico and Nano), via the recommended TWRP and the 3.3.1 one. The result is always the same: after the language selection, my phone reboots on the 'Just a sec', endlessly. I have to restore a nandroid backup, on order to have a working phone again.
Sent from my Xperia Z5 Compact using XDA Labs
Click to expand...
Click to collapse
i didn't have this behavior on my tests, but i usually let the system start and wait for few minutes before using it (especially on 1st boot).
Also, i always reboot once after the 1st boot.
Hope it will help
casouzaj said:
after the language selection, my phone reboots on the 'Just a sec', endlessly.
Click to expand...
Click to collapse
Clean install?
That should not happen...
Ryu--X said:
I can confirm that unfortunately GPS isn't working.
Click to expand...
Click to collapse
You have to enable google's location service in location settings. With that, maps is working with correct location; but I don't know if the location comes from gps, wlan or network. It's raining since many days and I don't want to stand outside in the rain and wait for gps connection... :angel:
I've tried to install f-droid and their location services; no better results...
By the way, i saw many other good roms on many devices ... that had an alpha rom far worse than this one
Click to expand...
Click to collapse
Yes, I know. The problems are always the closed-source binaries from qualcom and sony that are not properly working on LineageOS versions > 14.1
We're working on it but I'm not able to say if we can fix these issues.
BTW: Is anyone able to make an outgoing call successfully?
Berni-0815 said:
Clean install?
That should not happen...
Click to expand...
Click to collapse
Yup,, every single time!
Sent from my Xperia Z5 Compact using XDA Labs
As I said, that should not happen...
Berni-0815 said:
BTW: Is anyone able to make an outgoing call successfully?
Click to expand...
Click to collapse
i tried both calling and receiving a call without issue.
Just a pop up saying mobile network is unavailable ,at the end ,when i hang up (but it's wrong, network is still available)
Ryu--X said:
i tried both calling and receiving a call without issue.
Just a pop up saying mobile network is unavailable ,at the end ,when i hang up (but it's wrong, network is still available)
Click to expand...
Click to collapse
Weird! At my device this popup comes in the moment when trying to make an outgoing call. And this call is not started! The other end does not ring!
Could you please tell us, which preferred network type is set in *#*#info#*#* "Phone info" and in "Mobile network settings" (see screenshots)?
I'm not on any aspect a Dev but I give you all my energy on continuing the developpment of this ROM.
Any other support available ?
Berni-0815 said:
Weird! At my device this popup comes in the moment when trying to make an outgoing call. And this call is not started! The other end does not ring!
Could you please tell us, which preferred network type is set in *#*#info#*#* "Phone info" and in "Mobile network settings" (see screenshots)?
Click to expand...
Click to collapse
Here it is !
And you can make an outgoing call sucessfully? The other end rings and you can make a call?
Berni-0815 said:
And you can make an outgoing call sucessfully? The other end rings and you can make a call?
Click to expand...
Click to collapse
Yes exactly , both ways are ok (incoming and outgoing).
Ryu--X said:
Yes exactly , both ways are ok (incoming and outgoing).
Click to expand...
Click to collapse
Hmmm. Then is must be a problem with my german providers (with their apn I think); I've tested two: T-Mobile and O2. With both I can't make outgoing calls...
New version out; see 1st post
Berni-0815 said:
Hmmm. Then is must be a problem with my german providers (with their apn I think); I've tested two: T-Mobile and O2. With both I can't make outgoing calls...
Click to expand...
Click to collapse
Pretty strange, indeed.
The phone i tested with is on another provider than my z5c.
I got to say that i checked the apn before making my tests, and they were good.
I will retry with the new version tonight .
Thanks
The APN shouldn't matter for regular calls unless you're using Wifi calling or VoLTE, maybe disable both and see if it works.