At start sorry for my English.
My phone is totally bricked after my tries to unbrick my phone (Windows Device Recovery)
Phone isn't reacting. No charge vibration, don't turning on, just NOTHING. Lumia is only reacting when i connect it by cable to my laptop. How i can unbrick that phone :x Please help me ;c
feherneoh said:
Could you please give some additional info? What happens when you connect it to PC?
Click to expand...
Click to collapse
PC detect QHSUSB_Bulk and pc makes a "connection info" voice
Download and install Windows device Recovery Tool
Download from Lumiafirmware.com your model's Emergency files and ffu file
Locate thor2.exe and open a command line in that directory
Emergency and SFFU programming for Collins and Alpha:
thor2 -mode emergency -hexfile "{downloaded hexfile, full path!}" -mbnfile "{downloaded mbnfile, full path!}" -ffufile "{downloaded ffufile, full path!}.ffu"
If you copy the files in your thor2.exe subdirectory, you may drop the double quotes.
Look at this Thread:
https://forum.xda-developers.com/wi...nt/fix-dead-phone-bricked-bootloader-t3496232
Related
Hi, so I'm one of those idiots that bricked their phone. The good news (for me at least) is I bought it for $24 to play around with and learn WP. Well I'm learning! What not to do that is. So I wanted to try WP10 and ended up bricking it. After flashing some sketchy ported win 10 rom (the three bin files as opposed to an FFU) it was in an endless reboot loop where it would just show NOKIA and then reboot. I tried to restore it but the sketchy rom had changed the product ID. So I futzed with the boot loader (this is all in WPInternals by the way) and locked it. I can't unlock it because my FFU file doesn't match the product id and I can't re-flash the sketchy rom because WPInternals crashes every time I try. Now the phone just boots to ERROR: Unable to find a bootable option...
So...after a couple of days of reading and trying different things (long story short, the phone has some unknown product id that doesn't match my backup product id (or the ATT 920 FFU).
So I've been trying to start with restoring the boot loader like so:
Code:
thor2 -mode emergency -hexfile FAST8960_PHI_ATT.hex -mbnfile RM820_msimage_v1.0.mbn -orig_gpt
THOR2 1.8.2.18
Built for Windows @ 13:36:46 Jun 16 2015
Thor2 is running on Windows of version 6.1
thor2 -mode emergency -hexfile FAST8960_PHI_ATT.hex -mbnfile RM820_msimage_v1.0.mbn -orig_gpt
Process started Wed May 31 19:53:04 2017
Logging to file thor2_win_20170531195304_ThreadId-3536.log
Debugging enabled for emergency
Initiating emergency download
Operation took about 10.00 seconds.
THOR2_ERROR_CONNECTION_NOT_FOUND
THOR2 1.8.2.18 exited with error code 84000 (0x14820)
So as you can see I can't get thor to communicate in emergency mode with the phone (I can in uefiflash mode). In device manager the phone shows up as "Care Suite USB Connectivity" under USB devices.
This is where I am stuck and very much need your help!
Doug_M said:
Hi, so I'm one of those idiots that bricked their phone. The good news (for me at least) is I bought it for $24 to play around with and learn WP. Well I'm learning! What not to do that is. So I wanted to try WP10 and ended up bricking it. After flashing some sketchy ported win 10 rom (the three bin files as opposed to an FFU) it was in an endless reboot loop where it would just show NOKIA and then reboot. I tried to restore it but the sketchy rom had changed the product ID. So I futzed with the boot loader (this is all in WPInternals by the way) and locked it. I can't unlock it because my FFU file doesn't match the product id and I can't re-flash the sketchy rom because WPInternals crashes every time I try. Now the phone just boots to ERROR: Unable to find a bootable option...
So...after a couple of days of reading and trying different things (long story short, the phone has some unknown product id that doesn't match my backup product id (or the ATT 920 FFU).
So I've been trying to start with restoring the boot loader like so:
Code:
thor2 -mode emergency -hexfile FAST8960_PHI_ATT.hex -mbnfile RM820_msimage_v1.0.mbn -orig_gpt
THOR2 1.8.2.18
Built for Windows @ 13:36:46 Jun 16 2015
Thor2 is running on Windows of version 6.1
thor2 -mode emergency -hexfile FAST8960_PHI_ATT.hex -mbnfile RM820_msimage_v1.0.mbn -orig_gpt
Process started Wed May 31 19:53:04 2017
Logging to file thor2_win_20170531195304_ThreadId-3536.log
Debugging enabled for emergency
Initiating emergency download
Operation took about 10.00 seconds.
THOR2_ERROR_CONNECTION_NOT_FOUND
THOR2 1.8.2.18 exited with error code 84000 (0x14820)
So as you can see I can't get thor to communicate in emergency mode with the phone (I can in uefiflash mode). In device manager the phone shows up as "Care Suite USB Connectivity" under USB devices.
This is where I am stuck and very much need your help!
Click to expand...
Click to collapse
if you have full backup image of your phone(win32Disk image tool). then you put your phone in mass storage mode(keep press and hold camera button on reboot) and write image file.
A AJAY said:
if you have full backup image of your phone(win32Disk image tool). then you put your phone in mass storage mode(keep press and hold camera button on reboot) and write image file.
Click to expand...
Click to collapse
I can't seem to put it in mass storage mode. The phone will turn on if off (not getting past the error mentioned previously of course). And I can force it to reboot by holding vol down and power. But holding vol down, vol up or camera key after the vibration doesn't work as it should. In each case all that happens is the phone vibrates as it should, then the nokia logo is displayed, then the error message (unable to find boot option) displays for less than a second and finally the phone reboots.
Solved! Googling led me to useing vpl mode. That gave me an error which further googling I saw another person who also couldn't flash 059L848 but the developer version of the rom 059R2L5 worked. I tried that and now as I type this my phone is at the Welcome screen! Sweet!
Wow! Congratulations, I sold mine, but if I had not, I would have given it a try.
Best regards,
Joachim
Have a similar problem but I keep getting an error message of "The FFU file is not correctly signed or not signed for this device." I also put W10M on a Lumia 1020 and now have a constant error message of "Unable to find bootable option".
I'm so frustrated over this. Hoping to get it fixed and back to original WP8.1.
Seeking help!
---------- Post added at 06:55 PM ---------- Previous post was at 06:51 PM ----------
Doug_M said:
Solved! Googling led me to useing vpl mode. That gave me an error which further googling I saw another person who also couldn't flash 059L848 but the developer version of the rom 059R2L5 worked. I tried that and now as I type this my phone is at the Welcome screen! Sweet!
Click to expand...
Click to collapse
Can you give me more details on how you solved this? Thanks.
I just thought of something else: when I installed W10M on my Lumia, I changed it to make it appear as a Lumia 950XL. I used InterOP tools and RegEdit. Could this be related to the FFu signature problemas I'm getting today? How would I change these values?
WPInternals info: https://1drv.ms/u/s!Ag-KZVVb9pL6q5pd7wcC32KiUZzfjQ
Hello, long time no see.
I need help to Windows Phone can run on Nokia X2 -Ara. Today i tested on Nokia x2 prototype F1 RM1014 1 sim
This work high knowledge user, advance user, not for normal,noob or another guy dont know what they doing, need high knowledge.
Request:
A EDL cable to force X2 go to qcom 9008 dload or anothet mehod to force x2 go to qcom dload 9008
Full android backup of you system,back up via DD command or another tool kit. Full emmc image 3.6gb not backup of system,data,.tcc in twrp. full EMMC Backup via Terminal Android is my choise
Have a lot time to download file,restore file,flash file
And dont blame me if it doesnt boot to system
Need installed Thor2 . understand command of Thor2. Need install windows device recovery tool
XDA:DevDB Information
Firmware Windows Phone 8 on Nokia X2 (Unstable, need more work), ROM for the Nokia X2
Contributors
thinhx2
ROM OS Version: Windows 8 Mobile
ROM Kernel: Windows Kernel 1
Version Information
Status: Alpha
Created 2019-07-11
Last Updated 2019-07-29
Backup full emmc of android by terminal apk:
dd if=/dev/block/mmcblk0 of=/storage/sdcard1/backup.img
Coppy it to pc/laptop to restore android
Flash Emergency payload of Windows phone:
https://protobetatest.com/downloads/ download lumia emergency payload from this site, extract folder rm1071
Use EDL cable to force x2 go to qcom 9008 dload (for my self)
Open Thor2, type:
thor2 -mode emergency -hexfile "path to ede file" -edfile "path to edp file"
Done you will see in Device Manager,it will show lumia usb connectivity
But no display because it just repartition few partition of WP,but dont worry continue to have full partition of wp. Next post
Download this file ~4gb : https://drive.google.com/file/d/1kvJzOCaekZLkPNxGYk_ol0LQGUmuGl0M/view
Continue type command in Thor2 : thor2 -mode uefiflash -imagefile [PATH TO THE DOWNLOADED FILE] -startsector 0
Wait. It take you about 33mins ) . after success. Reboot device. You will got WP8.1 on x2. But have big problem : no display driver
If you flash UEFI from 532/435 you will have display work but after logo windows. Device will reboot,cant go to system. link : https://drive.google.com/file/d/15Gz6IfBPL1LiJcphQbEEVYIqX7uwl1Se/view?usp=sharing
I tried flash FFU and full emmc backup of 435/532 but same result: after logo Windows. Device will reboot
I need help to fix problem
And i think i need try install win rt on it
And x2 only have 4gb rom. Cant install rt
and i only try it on x2 prototype. Not x2 retail. Maybe x2 retail have security fuse. But who know. I just try for fun
dont try if you dont have high knowledge. It really hard. Not easy
It so fun ???
Time to sleep,i will update tomorrow. A great nght to play wp with x2 ))
This work not for normal user. Dont try it if you dont have good knowledge ))
Uefi mass storage mode work fine on x2
some one can help me port display driver?
thinhx2 said:
some one can help me port display driver?
Click to expand...
Click to collapse
can you try copying oempanel.sys and oempanel_etw.dll from 532\MainOS.img\Windows\system32\DRIVERS\ to vela and flashing ??
vatva69 said:
can you try copying oempanel.sys and oempanel_etw.dll from 532\MainOS.img\Windows\system32\DRIVERS\ to vela and flashing ??
Click to expand...
Click to collapse
Problem from Display config of Uefi. Uefi of 532 can enable display of 2 fw
thinhx2 said:
Problem from Display config of Uefi. Uefi of 532 can enable display of 2 fw
Click to expand...
Click to collapse
Ok, can you copy uefi config from 532?
vatva69 said:
can you try copying oempanel.sys and oempanel_etw.dll from 532\MainOS.img\Windows\system32\DRIVERS\ to vela and flashing ??
Click to expand...
Click to collapse
You living in Hanoi? Can tell me you address?. I living at Vinhome riverside
the solution of this error is simple.
just install proper qualcomm drivers from latest qpst setup . cause it includes the drivers too.
now just short the name of firmware folder to short form.
now open qpst or qfil, select firmware folder and select
rawprog_emmc_ufs_firehose_Sdm660_ddr.elf
then rawprogram unspare no nfc no fsg.xml '
then patch0. xml file
after that this is the main thing.
press vol + and vol- buttons together and put it into edl mode
and now connect it to the pc with cable . don't do anything till qpst or qfil not recognize it byself.
it took 30 sec to recogniz for my time.
it will take more for you may be. now download button will become available .
just click on it and now flashing will start without any error .
i was getting this error cause i was putting the device edl mode and connecting it to pc before opening of qfil or qpst.
you had to connect it after opening the qfil or qpst then you will not get any shara errror.
and have to wait at least 30 sec don't do anything till then . and after that windows will sound of connecting and that's it.
start flashing without shara error.
another solution:-
Copy firmware folder (imges) into
cdrive/programmer files/qualcomm/QPST/bin
2- Than open QFIl Select Programme Files .mbn
then both .xml Files From Cdrive where U copy
3- Now Close QFIL
4- Now Connect Handset Into Quacomm Mode (hs-usb , edl , download etc )
5- Open QFIL Again
Already Post Selected
6- Now Press Download
SUCCESS
latest qpst download from this site:-https://androidmtk.com/download-qpst-flash-tool
also try this in offline mode like remove all internet connection or wifi disable or enable airplane mode on your pc or lapto
Can post a link of QPST that you used
DJ AJB said:
Can post a link of QPST that you used
Click to expand...
Click to collapse
still getting shara error which version of winodws you using
if using windows 10 disable driver signature enforcement first then install qualcomm drivers perfectly included in qpst
after that open qfil or qpst now select all files and after that boot device in edl mode and connect it now to the pc rember dont connect with pc before qfill or qpst open now with usb cable wait for atleast 40 sec if it get recognize . download button will become available ,just click on it and start flashing
Thanks a lot it has successfully finished
When I do this I always receive:
2021-07-13 14:27:51.932 Download Fail:FireHose Fail:FHLoader Fail: process fail
Can someone give me any advice?
I also included my log.file
I waited for long, i had to selec the port as it says
im lost
Hi, I had a Lumia 925 and wanted to jailbreak it since I found a few people who did this and I wanted it for my own reasons. Anyway, as with all the guides, I used the Windows Phone Internals tool. I downloaded all of the files from LumiaFirmware.com and I opened Windows Phone internals, selected Unlock bootloader and added all of the files (rebooting to Flash mode, of course) and it wouldnt let me start. It would always say: The OS version is not supported. Use a donor-FFU. I tried with another FFu, but it still did not work (I tried flashing the downloaded rom and trying again, but same thing). Anyway, now I did something and now the device is recognised in Windows as "Qualcomm QHSUSB-DLOAD". How can I restart the phone? Windows Phone Internals does not recognize it.
By the way, this is my first time doing things, I may have done something wrong. I did download all drivers, in case you are wondering
Hi,
open windows device manager and use the windows/nokia emergency driver for your device. Then look for thor2.exe, it is a part of WindowsDeviceRecoveryTool.
Open a command prompt window.
Type/paste thor2 -mode emergency -hexfile D:\Packages\Products\RM-994\FAST8930_BATMANROW.hex -mbnfile D:\Packages\Products\RM-994\RM994_msimage_v1.0.mbn -ffufile D:\Packages\Products\RM-994\RM994_3056.40200.1407.0002_RETAIL_eu_euro2_1168_02_405247_prd_signed.ffu
REPLACE my product RM994 with your product and the file names too. Replace D:\Packages\Products with the directory on your PC. You get the emergency files from lumiafirmware.com.
Contact me if there are problems, we will sort that out.
Regards,
Joachim
People, please help!
I decided to unlock my lumia 720, I did everything according to the instructions. At first everything went fine, but then wpinternels got stuck on flashing done. rebooting. Then the computer just stopped seeing the phone. Now the phone does not turn on and does not charge, generally like a dead one. Even wdrt doesn't see it. Is it a brick or not? Help!
People, please help!
I decided to unlock my lumia 720, I did everything according to the instructions. At first everything went fine, but then wpinternels got stuck on flashing done. rebooting. Then the computer just stopped seeing the phone. Now the phone does not turn on and does not charge, generally like a dead one. Even wdrt doesn't see it. Is it a brick or not? Help!
People, please help!
I decided to unlock my lumia 720, I did everything according to the instructions. At first everything went fine, but then wpinternels got stuck on flashing done. rebooting. Then the computer just stopped seeing the phone. Now the phone does not turn on and does not charge, generally like a dead one. Even wdrt doesn't see it. Is it a brick or not? Help!
Hi,
please have a look into your device manager. If you find something like Qualcomm Boot loader device, proceed with one of those many instructions "unbrick without JTAG". I think your Lumia is in emergency mode.
You may also look for thor2.exe on your computer, it is in the Windows Device Recovery Tool subdirectory. Open a command line window, type thor2>help.txt and open help.txt with a text editor. Look up emergency mode. You will find something like [thor2 -mode emergency -hexfile D:\Packages\Products\RM-994\FAST8930_BATMANROW.hex -mbnfile D:\Packages\Products\RM-994\RM994_msimage_v1.0.mbn]. Notice, that is for my phone, not a 720. File name and directory entries must be changed to your needs, but hopfully you will understand the pattern.
Good luck!
Joachim
I'm found hex and mbn files for my lumia 720, changed your command for my files, but thor2 wrote this log:
C:\Program Files (x86)\Microsoft Care Suite\Windows Device Recovery Tool>thor2 -
mode emergency -hexfile "E:\720\hex.hex" -mbnfile "E:\720\mbn.mbn"
THOR2 1.8.2.18
Built for Windows @ 13:36:46 Jun 16 2015
Thor2 is running on Windows of version 6.2
thor2 -mode emergency -hexfile E:\720\hex.hex -mbnfile E:\720\mbn.mbn
Process started Sat Jun 03 13:32:23 2023
Logging to file C:\Users\pikachu\AppData\Local\Temp\thor2_win_20230603133223_Th
readId-4876.log
Debugging enabled for emergency
Initiating emergency download
Operation took about 20.00 seconds.
THOR2_ERROR_CONNECTION_NOT_FOUND
THOR2 1.8.2.18 exited with error code 84000 (0x14820)
C:\Program Files (x86)\Microsoft Care Suite\Windows Device Recovery Tool>
JoachimP said:
Hi,
please have a look into your device manager. If you find something like Qualcomm Boot loader device, proceed with one of those many instructions "unbrick without JTAG". I think your Lumia is in emergency mode.
You may also look for thor2.exe on your computer, it is in the Windows Device Recovery Tool subdirectory. Open a command line window, type thor2>help.txt and open help.txt with a text editor. Look up emergency mode. You will find something like [thor2 -mode emergency -hexfile D:\Packages\Products\RM-994\FAST8930_BATMANROW.hex -mbnfile D:\Packages\Products\RM-994\RM994_msimage_v1.0.mbn]. Notice, that is for my phone, not a 720. File name and directory entries must be changed to your needs, but hopfully you will understand the pattern.
Good luck!
Joachim
Click to expand...
Click to collapse
I'm not have this in device manager. Computer doesn't see my phone.
Did you try a different USB cable, different USB port on your computer (rear side if you have a desktop or tower pc)? Did you pull the battery or press volume down ans power switch at the same time for about 20 seconds to make a power reset?
You might pn me a screenshot of your device manager.
I tried 4 different cables and different usb connectors on my laptop, still doesn't help. I also tried to hold the keys, the phone vibrates and nothing else happens. I can't remove the battery because on the lumia 720 it's not removable and I don't have a screwdriver to remove the back cover.
I am using windows 8.1 64 bit on my laptop. When you connect the phone in the device manager, nothing changes.
I tried 4 different cables and different usb connectors on my laptop, still doesn't help. I also tried to hold the keys, the phone vibrates and nothing else happens. I can't remove the battery because on the lumia 720 it's not removable and I don't have a screwdriver to remove the back cover.
I am using windows 8.1 64 bit on my laptop. When you connect the phone in the device manager, nothing changes.