Database Develop

[Magisk/Root/Xposed/Busybox]Huawei P9 Lite

-This methode is old but working with emui 4 Android MM (6). Not work with Android N (7).
-Xposed not work in systemless mode if your Android security patch is >= november 2016
-Try to search the last version of zip files and apk on google, the version on this tutorial is old.
Hi!
This tutorial will install Magisk, phh's superuser, xposed and busybox on your Huawei P9 lite device!
Tested on a VNS-L31C432B151 version but normally work on all VNS-L31 and VNS-L21.
Magisk will allow you to "hide" the root... not realy just hide because Magisk and phh's superuser systemless edition create the root outside the system folder!
Magisk feature for common user:
-"hide" root (PokémonGo, Androidpay, banking app, ... all work!) work with
-Magisk not only allow you to replace existing file and directories, but also support adding new files and directories into system!
-Update OTA work! (not tested by me)
For more detail visite this post: http://forum.xda-developers.com/android/software/mod-magisk-v1-universal-systemless-t3432382
Phh's superuser work at 100% on this device
After a lot of Xposed version tested I can say that Xposed systemless edition is by far the best for P9 lite!
DONT install busybox on system folder!
Ok let's go:
1 Update your system on last emui version and swipe data/factory reset to get a clean and untouched device!
2 Unlock your bootloader (see multiple method on this forum)
3 Install TWRP 3.0.2.0 (see multiple method on this forum)
4 Download this files: Magisk V6.zip / phh's superuser 17.zip / xposed-v86.5-sdk23-topjohnwu.zip / Magisk Manager.apk / XposedInstaller_by_dvdandroid.apk. Put all this files on your externalSD.
5 Go to TWRP recovery and flash in order [Magiskv6.zip > phh's_superuser.zip > Xposed-v.86.5.zip] also reboot your device.
6 When you are on the homescreen go reboot again.
7 Install Magisk Manager.apk and XposedInstaller.apk, then go to the playstore download and install Phh's SuperUser app AND Busybox meefik. Reboot after this step.
8 Open your setting app and allow permission SD card to Busybox.
9 Open Busybox >> settings. Remplace the path file /system/xbin/ with /data/busybox/ and check "Remplace Applets". Also go Menu Zip Archive and download this zip.
10 Go on TWRP recovery and flash the busybox zip file.
10 please perform 3 or 4 reboot
DONE!
So, please try to open yours setting app. if it appears you have done! If not, please try again this method
Now, go Magisk Manager (app) and switch root togle off, launch your protected against root app and normally work!
(Dont need reboot between switch root off/on!)(Selinux switch work, but not persist a boot)
Have fun!

Well done. Works perfect.

The are no files any more

Links are dead

deleted

Evas0r said:
Battery draining after the process...
Is this xposed fault?
Click to expand...
Click to collapse
yes u have to flash another version

Did anyone try this on Nougat/Android 7?

Alexander33 said:
Did anyone try this on Nougat/Android 7?
Click to expand...
Click to collapse
TWRP with this [RECOVERY]Revolution Recovery Android Nougat {15-12-16} Beta .9 in Nougat but anything I tried to flash failed.

Is there anything one can do to get Pokémon Go working while having all of these installed?

Alexander33 said:
Did anyone try this on Nougat/Android 7?
Click to expand...
Click to collapse
Hey, man I've tested it on my Huawei P9-LITE B370 and it all works perfectly. To flash Magisk, you need this custom recovery (https://forum.xda-developers.com/huawei-p9lite/development/twrp-t3588356)

this really helped me thanks

Helped me alot. Still, post is a bit old, so what I did on b380 version:
FLASH RECOVERY twrp-3.1.1-0-venus.img
FLASH KERNEL Elite+Kernel+for+P9+Lite+CxxB3xx+v10.1.zip
ROOT with Magisk-v13.0(96f8efc).zip
INSTALL busybox archive via recovery to /sbin (for me it installed on /system/xbin, still ok.)
REBOOT after each step
Finally works ! :good:

is this Magisk work on Huawei P9?

I have Emui 5.0 and Android 7.0. I flashed everything except xposed but I still can't use Pokémon Go or Snapchat. Is it beacause i can't flash xposed? And when yes, how can I fix it?
Lg ThePrinoob

ThePrinoob said:
I have Emui 5.0 and Android 7.0. I flashed everything except xposed but I still can't use Pokémon Go or Snapchat. Is it beacause i can't flash xposed? And when yes, how can I fix it?
Lg ThePrinoob
Click to expand...
Click to collapse
flash magisk v13

simo255 said:
flash magisk v13
Click to expand...
Click to collapse
Ok, I will test it!

I installed magisk v13 and got the app but it when it check safety net it doesnt work. What should I do?

ThePrinoob said:
I installed magisk v13 and got the app but it when it check safety net it doesnt work. What should I do?
Click to expand...
Click to collapse
enable magisk hide and see if usb debugging is enabled

simo255 said:
enable magisk hide and see if usb debugging is enabled
Click to expand...
Click to collapse
Okey thank you it worked.

Hey,
If I open the camera app or snpachat I cant make any picture so I have a blackscreen. What should I do? And in youtube or Instagram I cant see videos, they dont load and I also cant hear any sound.
Sorry for my bad english.

[BUG] Magisk refuses to install modules from repo (The zip is not a Magisk Module!)

I've had magisk installed since version 6, I've published some magisk modules already and never had a problem until today.
After a full clean reinstall of Nougat NBD90Z (with wipe) on my Nexus 6 and then flashing Magisk, phh's superuser for magisk, installing phh's superuser apk from play store and magisk manager apk I stumbled upon a previously reported (without details) bug where magisk manager would refuse to install modules from repo claiming they are not magisk modules.
I've struggled trying everything I could including the full wipe (more details here: http://forum.xda-developers.com/apps/magisk/module-app-systemizer-t3477512/69230448#69230448) and bounced some ideas off @pnwsr6 who's had the similar problem on Nexus 6 device.
I've achieved a partially working Magisk Manager (manual installs of ZIP files work, but installs from repo still fail) and here's the list of steps which lead to me having semi-working magisk manager again:
1. I flashed ZIP files of some modules in twrp (I'm attaching App Systemizer and Nexus 6 LED Enabler which I flashed)
2. After the phone booted up I saw the modules active and working
3. Within Magisk Manager I then added the ZIP file of the phh's superuser module from that thread (http://forum.xda-developers.com/attachment.php?attachmentid=3893967&d=1475554052)
4. Now at least manual installation of modules within Magisk Manager are working fine.
@topjohnwu -- I've enabled verbose logging and extra logging for bash commands, but I'm still not seeing anything in the log on top of the regular output.

Created an issue against Magisk Manager so it's easier to track for developers: https://github.com/topjohnwu/MagiskManager/issues/20

Looks like that even after flashing some modules in twrp, Magisk Manager only allows to install from zip only exactly the same ZIP I've already flashed (even a minor change and bump of versionCode results in "This ZIP is not a Magisk Module!"). So it might be an issue of Magisk Manager being unable to write to /magisk despite having storage permission and being granted root access.

Well, it works now (you'll have to wipe again). So here's the sequence of events:
1. Flashed @RatchetPanda's busybox http://forum.xda-developers.com/attachment.php?attachmentid=3850579&d=1471875389 from twrp -- got stuck on a boot animation, rebooted again in twrp, flashed magisk uninstall and it didn't help for some reason.
2. So I force-rebooted into fastboot and flashed nbd90z with wipe.
3. After apps were restored and everything was set up, I booted into twrp (it didn't even ask me if I want to allow /system modifications for some reason), added magisk v8 and phh's r259 root to the list, flashed them both.
4. Once the phone booted I could again install modules from repo/zips.
Maybe something didn't get properly wiped first two times but it's working now @pnwsr6!

I've seen this error as well on my Nexus 6 NBD90Z with Magisk v8. Started with v7 after some heavy modification on my part .
I was sometimes able to fix it by simply extracting the zip and then Magisk Manager would somehow recognize it as a module.. Other times I could extract the zip and then re-archive the contents and Magisk Manager would recognize that as a module. Weird, but doable.

stangri said:
Well, it works now (you'll have to wipe again). So here's the sequence of events:
1. Flashed @RatchetPanda's busybox http://forum.xda-developers.com/attachment.php?attachmentid=3850579&d=1471875389 from twrp -- got stuck on a boot animation, rebooted again in twrp, flashed magisk uninstall and it didn't help for some reason.
2. So I force-rebooted into fastboot and flashed nbd90z with wipe.
3. After apps were restored and everything was set up, I booted into twrp (it didn't even ask me if I want to allow /system modifications for some reason), added magisk v8 and phh's r259 root to the list, flashed them both.
4. Once the phone booted I could again install modules from repo/zips.
Maybe something didn't get properly wiped first two times but it's working now @pnwsr6!
Click to expand...
Click to collapse
I probably won't try again until next update, and hope the wipe just wasn't clearing something. I have the zip installed through twrp and working for now so I'm good till then.

just wondering if you're still having this issue with v9? I had modules installed fine under v6, but never really installed any modules under v8 to see if this problem occurred for me. now that I'm on v9, which has been wiped clean to start, I can no longer install any modules via Downloads or in the Modules section... any suggestions?

I have the same issue when trying to install viper with v9 on Nexus 6P DP2
Skickat från min Nexus 6P via Tapatalk

Same here. Find a fix ?

From what I hear, ZIP/module management has been reworked in the upcoming magisk v10, so unless you want to go the route I went thru, you can just wait for that.

stangri said:
From what I hear, ZIP/module management has been reworked in the upcoming magisk v10, so unless you want to go the route I went thru, you can just wait for that.
Click to expand...
Click to collapse
Just an FYI, I do still have this problem, but can install the zip through twrp. Maybe 10 will be the solution.

I had the same problem, I cleared magisk manager data and it works fine now

Didn't help
Sent from my SM-G532F using Tapatalk

I've published snapshot builds of magisk v10 and magisk manager v2.6, try these together to see if they'd help.

stangri said:
I've published snapshot builds of magisk v10 and magisk manager v2.6, try these together to see if they'd help.
Click to expand...
Click to collapse
I tried the latest one from the 26th, magisk manager keeps crashing when trying to install the downloaded dialer/contacts on HTC 10.

Meowdib said:
I tried the latest one from the 26th, magisk manager keeps crashing when trying to install the downloaded dialer/contacts on HTC 10.
Click to expand...
Click to collapse
Weird, do you have the same problem with magisk manager 161223?

stangri said:
Weird, do you have the same problem with magisk manager 161223?
Click to expand...
Click to collapse
Same

I need a Help to download modules using magisk
Lastest version, Included phh root, manager is from G. play,
But Modules download function is not working
Say "No modules found" for download to install via magisk.

LineageOS Viper4Android

Did anyone of you got Viper4Android working on the unified builds of LineageOS for the 3T? And if so could you explain how? I tried the flashable zips of Viper4Arise but the driver was unsupported everytime and when i installed the Viper apk, installed the drivers and rebooted the app asked me again to install drivers and so on.
Thanks in advance

mittey68 said:
Did anyone of you got Viper4Android working on the unified builds of LineageOS for the 3T? And if so could you explain how? I tried the flashable zips of Viper4Arise but the driver was unsupported everytime and when i installed the Viper apk, installed the drivers and rebooted the app asked me again to install drivers and so on.
Thanks in advance
Click to expand...
Click to collapse
Install Magisk as your root solution, not SuperSU and install the module for Viper from the "downloads" section of the Magisk Manager (you will need to update Magisk Manager from play store). Reboot. After reboot, get a root file explorer and follow the instructions here: https://forum.xda-developers.com/oneplus-3t/themes/v4a-fix-processing-using-magisk-t3572819
Reboot Again. Then download the official Viper APK from: http://www.mediafire.com/file/xonl4jha2e4vez1/ViPER4Android_FX_v2505.zip (official link is from http://vipersaudio.com/blog/?page_id=48) and install it.
Done
I would clean install your rom to get rid of any existing system installs of Viper4arise or similar though. Dirty Flash should also work. @mittey68

manor7777 said:
Install Magisk as your root solution, not SuperSU and install the module for Viper from the "downloads" section of the Magisk Manager (you will need to update Magisk Manager from play store). Reboot. After reboot, get a root file explorer and follow the instructions here: https://forum.xda-developers.com/oneplus-3t/themes/v4a-fix-processing-using-magisk-t3572819
Reboot Again. Then download the official Viper APK from: http://www.mediafire.com/file/xonl4jha2e4vez1/ViPER4Android_FX_v2505.zip (official link is from http://vipersaudio.com/blog/?page_id=48) and install it.
Done
I would clean install your rom to get rid of any existing system installs of Viper4arise or similar though. Dirty Flash should also work. @mittey68
Click to expand...
Click to collapse
Worked! Thanks man

mittey68 said:
Worked! Thanks man
Click to expand...
Click to collapse
Anytime! Can't take credit for the original find though

Root using Magisk v14

Hello,
I just got my P10 (VTR-L29) yesterday, coming from a P8 Lite that I used to play a lot with and I already miss the adblock and the clean debloated system.
According to the new version of Magisk here, there is a new install method that works if you don't have a custom recovery like it used to be in the past. The new method modifies the boot.img via Magisk Manager, stores it in a folder and then you have to flash it with adb.
My question is: Do I have to unlock my phone in order to do that trick? Anyone else that tried something similar?

Nobody?
Maybe I'm not clear enough..
Steps to reproduce:
-install Magisk Manager 14 and use the inside app patcher
-find the patched boot.img on storage
-move the boot.img in PC storage
-use the PC in order to flash the patched boot.img
-reboot and wait
It's supposed to work that way but I don't want to unlock the bootloader,atleast for now.
Is it safe to do?

Xperias do not boot with the bootloader locked if boot.img is changed. I guess it will be the same for Huaweis.

So the only way to do that is to unlock the bootloader..seems like I have to do it lol.

Magisk v14 is working on my device. Unfotunately, i cannot pass safetynet. How about you guys?

Working but I Guess that You unlocked the bootloader,right?
You can try to use the universal safetynet fix, flash it in twrp and check.

Firicel69 said:
Working but I Guess that You unlocked the bootloader,right?
You can try to use the universal safetynet fix, flash it in twrp and check.
Click to expand...
Click to collapse
Already tried that (the new one for v14). Unfortunately, it didn't work.
Thank you anyway

garris_bibop said:
Magisk v14 is working on my device. Unfotunately, i cannot pass safetynet. How about you guys?
Click to expand...
Click to collapse
I had the same problem. Maybe my experience will help:
Open Magisk manager and check Log->Magisk. Are there any messages from MagiskHide? It should be.
Try this:
1. Open Magisk manager and disable Magisk hide.
2. Reboot
3. Open Magisk manager and enable Magisk hide.
I used commands in Terminal Emulator
Code:
su
magiskhide --disable
magiskhide --enable
At first it didn't work out but after a lot of desperate enabling/disabling and few reboots MagiskHide started to work (I couldn't determine the reason of its misbehaving).
For now I successfully pass SafetyNet checks.

The root permission request is no longer displayed

I have the root with Magisk in Android 8.0. At first, the warning always came out asking if you wanted to grant root rights to the application that you just opened. However, this warning is no longer displayed, even though the configuration of Magisk Manager is configured in this way.
In the Magus Superuser section, I do not see any trace of the applications that I can not 'root'.
I have updated Magisk Manager, but the error continues. I also removed BusyBox, but the error continues.
I can not give root permission to any other application. But the mobile is rooted, since the first applications that I installed that require root continue to function normally. I can even deactivate the root and then activate it again.
Reinstalling the applications is not solved. With Dalvik and Caché wipe either.
That could be happening? How is it solved?
____
Magisk Manager has all the permissions of everything (memory, background, manual battery mode). I have tried to reinstall Magisk Manager and nothing.
Deactivating BusyBox (Magisk module) and Xposed and restarting still does not work.
Returning to install the Magisk image by TWRP or Fastboot is not fixed either.
I have removed all the fret that I had done to the phone (BusyBox, Xposed, root Magisk and boot modified for the root) and the problem has not been solved. I do not know what may be happening. I do not have other rare applications.
I have installed Device Control and the TWRP application. I have not gotten the root request to skip (although it has activated that option in Magisk Manager).
Definitely, it is not the fault of the new applications, which was the first question I wanted to solve.
Magisk version:
19.3 (19300)
And from Manager 7.2.0 (213), although I have also tried 7.3.2 (224).
The root is done with patching (via Magisk) of RAMDISK.IMG.
I understand that some applications are not compatible with systemless. But I'm not going any of the new ones that I'm trying. Interestingly, other applications compatible with Magisk (except those that installed the first days of the mobile) do not work either.
I have installed Magisk Manager 7.0.0 (and also 6.1.0), but the bug is still there. It seems that it does not depend on the APK.
As my Magisk file to root consists of a patch of RAMDISK.IMG created directly from Magisk Manager I do not know how to create one based on a lower version (for example, version 18.1). It only gives me the option to patch with the latest Magisk Manager version (if I have a lower one, it asks me to update the APK).
Whenever I generate the IMG of my patched RAMDISK.img it is based on 19.3.
How could I generate a patched IMG based on a lower version?
I have microG, not the GApps. Could that influence? Does Magisk need them?

@rovo89

@topjohnwu

https://www.didgeridoohan.com/magisk/MagiskHelp

I have added much more information.

Reinstall firmware???

LoneWolfz said:
Reinstall firmware???
Click to expand...
Click to collapse
I'm going to do it today. Will I lose data if I install SYSTEM.img via Fastboot?

535iu said:
I'm going to do it today. Will I lose data if I install SYSTEM.img via Fastboot?
Click to expand...
Click to collapse
No maybe but i suggest you to backup all your data etc. just to be safe