Official lineage is nougat ROM 7.1.1 for Asus z00ld
INSTALLATION INSTRUCTION
1. make sure you have install twrp recovery in your Asus z00ld
2 reboot into twrp recovery in Asus z00ld
Hold volume down key and power key and press the same time Asus logo appear and release the key now you are in twrp recovery in Asus z00ld
3. Backup your current ROM before flashing linage os
4. Wipe factory reset and go advance wipe and wipe every thing do not wipe micro sd and
5. install linage os latest build and wipe delvik cache
6. And install gapps package
7. First boot make some time
Don't worry
Now ENJOY
Lineage os link-
https://download.lineageos.org/Z00L
Gapps link
http://opengapps.org/
Download gapps arm 64 and select stock and 7.1
Enjoy this rom
After flashing rom and gapps, and I reboot the phone, my phone is stuck in fastboot mode. Help please!
Sumit kumar pandit said:
Official lineage is nougat ROM 7.1.1 for Asus z00ld
INSTALLATION INSTRUCTION
1. make sure you have install twrp recovery in your Asus z00ld
2 reboot into twrp recovery in Asus z00ld
Hold volume down key and power key and press the same time Asus logo appear and release the key now you are in twrp recovery in Asus z00ld
3. Backup your current ROM before flashing linage os
4. Wipe factory reset and go advance wipe and wipe every thing do not wipe micro sd and
5. install linage os latest build and wipe delvik cache
6. And install gapps package
7. First boot make some time
Don't worry
Now ENJOY
Lineage os link-
https://download.lineageos.org/Z00L
Gapps link
http://opengapps.org/
Download gapps arm 64 and select stock and 7.1
Enjoy this rom
Click to expand...
Click to collapse
there is already a post on the development section by the original developer ... why u posted this without any proper credits ... in the first place this post wouldn't be here ....
stop doing this otherwise moderators will be forced to Bann you
dipamdasgupta said:
there is already a post on the development section by the original developer ... why u posted this without any proper credits ... in the first place this post wouldn't be here ....
stop doing this otherwise moderators will be forced to Bann you
Click to expand...
Click to collapse
please give me the link to unlock bootloader apk for Asus_Z00LD. I tried with many apks, but I failed. Thank You. It ll be really helpfull.
please help me to fix it , its urgent i dont have ano .
Any compatible rom for Asus Z00LD?
Sumit kumar pandit said:
Official lineage is nougat ROM 7.1.1 for Asus z00ld
INSTALLATION INSTRUCTION ...
Click to expand...
Click to collapse
That link to lineageos is not available anymore. Moreover I see that none of the roms I found on the web to be compatible with the Asus Zenfone Laser 2 - Z00LD (XenonHD , Lineageos and CosmicOS) seem to be currently available. Can anyone help me understanding which supported rom should I use for that device? Thanks.
CerealKiIIel said:
That link to lineageos is not available anymore. Moreover I see that none of the roms I found on the web to be compatible with the Asus Zenfone Laser 2 - Z00LD (XenonHD , Lineageos and CosmicOS) seem to be currently available. Can anyone help me understanding which supported rom should I use for that device? Thanks.
Click to expand...
Click to collapse
Same issue here downloaded and tried many roms, none of them worked.
Related
This ROM is smooth and work faster
phone is not overheating
And no bugs found very good ROM
I have given a link
https://download.mokeedev.com/?device=z00l
Installlation instruction
Make sure you have install twrp recovery
1. First reboot into twrp recovery
And wipe every thing in advance wipe
Do not wipe micro SD
And go to the install in twrp recovery and locate the mokee
ROM and install it after install the mokee ROM
Wipe dalvike cache
And again go to install and select gaap package and install
First boot make some time don't worry
It and the reboot device
ENJOY
Gaap link is http://opengapps.org/
Nougat ROM 7.1.1
Have fun guys
What's the most stable version? According to reviews, this is a very underestimated rom
Screenshots please ?
Sumit kumar pandit said:
This ROM is smooth and work faster
phone is not overheating
And no bugs found very good ROM
I have given a link
https://download.mokeedev.com/?device=z00l
Installlation instruction
Make sure you have install twrp recovery
1. First reboot into twrp recovery
And wipe every thing in advance wipe
Do not wipe micro SD
And go to the install in twrp recovery and locate the mokee
ROM and install it after install the mokee ROM
Wipe dalvike cache
And again go to install and select gaap package and install
First boot make some time don't worry
It and the reboot device
ENJOY
Gaap link is http://opengapps.org/
Nougat ROM 7.1.1
Have fun guys
Click to expand...
Click to collapse
Question this is a ROM right why is it not in development section of these forums? Why here?
Not liked..
Mokee os has advertisement.
I'm not the ROM Creator or Developer
I'm just sharing how I successfully installed RR N on my ZE601KL
I put strain on ZE601KL cause it was difficult to find proper help and instructions and I kept facing some or the other issues for some time
The major problem I faced was Speaker not working and I got it fixed permanently by flashing ROM with proper procedure
This ROM is published by Fabb2303 and CLICK HERE to see his original thread.
I greatly appreciate all efforts of the dev
Downloads:
RR N latest build (from his thread)
Speaker Fix (from his thread)
Latest BeanGapps-arm64-7.1 - CLICK HERE
Official Unlock App
TWRP 3.0.2-Z00T
My Procedure:
1. Initially I was on Stock Asus ROM (WW-21.40.1220.1998)
2. Then I unlocked bootloader using Official Unlock App
3. Then flashed TWRP 3.0.2-Z00T
4. Advanced Wipe : System, Data, Cache, Dalvik-Cache
5. Install RR N zip + BeanGapps + Speaker Fix (All together)
6. Wipe Dalvik-Cache and Reboot
anyone know how to fix power button not working? i don't know how can this happen before but my volume button is working and i can go into recovery mode with vol button + power buttom and still the power button still not working, i cant turn on/off my phone with that and i can't even lock/unlock my device with that.. please help!
Can you turn on your phone using power button or just go to recovery? If yes that means it works, so it's just time to change your ROM. Follow guides.
Pierfranc said:
Can you turn on your phone using power button or just go to recovery? If yes that means it works, so it's just time to change your ROM. Follow guides.
Click to expand...
Click to collapse
i can't turn of/on my phone with power button but i can go to recovery mode with power button and vol button, i use vyper os with dragonxia kernel, but thats never happen before, i dont know why i just got this problem but its normal before
RyogaAru said:
i can't turn of/on my phone with power button but i can go to recovery mode with power button and vol button, i use vyper os with dragonxia kernel, but thats never happen before, i dont know why i just got this problem but its normal before
Click to expand...
Click to collapse
If you can go in recovery that means there is no physical problem but just software error, so:
I recommend you to use last build of Lineage Os 14 (or another Nougat based ROM).
In recovery TWRP (last update):
Wipe system, data, dalvik, cache
Install latest MIUI China Dev zip
Install Lineage Os 14 (or another Android 7 custom ROM)
Install Gapps arm64 7.1 Pico
Install Magisk or Su Extra package for Lineage if you want root.
If the button still doesn't work, flash through PC latest China dev fastboot ROM version following the guide on MIUI official site.
Pierfranc said:
If you can go in recovery that means there is no physical problem but just software error, so:
I recommend you to use last build of Lineage Os 14 (or another Nougat based ROM).
In recovery TWRP (last update):
Wipe system, data, dalvik, cache
Install latest MIUI China Dev zip
Install Lineage Os 14 (or another Android 7 custom ROM)
Install Gapps arm64 7.1 Pico
Install Magisk or Su Extra package for Lineage if you want root.
If the button still doesn't work, flash through PC latest China dev fastboot ROM version following the guide on MIUI official site.
Click to expand...
Click to collapse
okay, I'll try it, btw thanks for the reply
Pierfranc said:
If you can go in recovery that means there is no physical problem but just software error, so:
I recommend you to use last build of Lineage Os 14 (or another Nougat based ROM).
In recovery TWRP (last update):
Wipe system, data, dalvik, cache
Install latest MIUI China Dev zip
Install Lineage Os 14 (or another Android 7 custom ROM)
Install Gapps arm64 7.1 Pico
Install Magisk or Su Extra package for Lineage if you want root.
If the button still doesn't work, flash through PC latest China dev fastboot ROM version following the guide on MIUI official site.
Click to expand...
Click to collapse
what should i need to install? miui cn dev rom or just the firmware?
RyogaAru said:
okay, I'll try it, btw thanks for the reply
Click to expand...
Click to collapse
No problem, if it resolves your problem it helps all
---------- Post added at 02:08 PM ---------- Previous post was at 02:07 PM ----------
RyogaAru said:
what should i need to install? miui cn dev rom or just the firmware?
Click to expand...
Click to collapse
I flash all the China Dev ROM for security but firmware would be enough. Try first with full rom and than other steps.
Lineage 15.1 for Xperia XZ
Based on SODP
By Sjll
This is a stable and performance version
Download Link: AndroidFileHost
Choose the file named "kagura"
OEM download : Link
How to flash:
1. Wipe Data and flash in twrp
2. Flash oem with SW_binaries_for_Xperia_Android_8.1.6.4_r1_v17_tone.zip
3. Boot and Enjoy.
Feature: Performance, Stable, Gcam support.
Gcam recommend: MGC_6.1.009_MI8_A8.1+_V0_2.apk
For dual model
Add this in build.prop
Code:
persist.multisim.config=dsds
persist.radio.multisim.config=dsds
ro.telephony.default_network=9,1
Source code: Github
XDA:DevDB Information
Lineage 15.1 for the Sony Xperia XZ
Contributors
Sjll
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.4
Version Information
Status: Stable
Created 2020-03-26
Last Updated 2020-3-26
2. Flash oem in SW
Hello
I am brand new here so I am not sure if I should post a question here or some place else? I started working on installing Lineage OS to my Xperia XZ about 10 days ago with no results. Than I found this thread today after installing Lineage OS on Realme 3 Pro.
Can you explain to me what I am suppose to do here?
2. Flash oem in SW_binaries_for_Xperia_Android_8.1.6.4_r1_v17_tone .zip
Kind Regards
T
toxypoxy said:
Hello
I am brand new here so I am not sure if I should post a question here or some place else? I started working on installing Lineage OS to my Xperia XZ about 10 days ago with no results. Than I found this thread today after installing Lineage OS on Realme 3 Pro.
Can you explain to me what I am suppose to do here?
2. Flash oem in SW_binaries_for_Xperia_Android_8.1.6.4_r1_v17_tone .zip
Kind Regards
T
Click to expand...
Click to collapse
1. Backup all your staff.
2. Unlock Bootloader on Sony Xperia XZ
3. fastboot flash recovery twrp-kagura-oem-to-vendor.img---------> https://sx.ix5.org/files/builds/kagura/misc/twrp-kagura-oem-to-vendor.img ....Use this TWRP , it will solve your " Failed to mount ´/oem´ " problem!
4. fastboot flash oem SW_binaries_for_Xperia_Android_8.1.6.4_r1_v17_tone .img
5. In TWRP --> flash --->zip rom.
6. reboot.
7. Optional (you can install Magisk https://github.com/topjohnwu/Magisk/releases/download/v20.4/Magisk-v20.4.zip) to uninstall Magisk --> https://github.com/topjohnwu/Magisk/releases/download/v20.4/Magisk-uninstaller-20200323.zip
İf you have never done such thing before! Research for more info.
Thanks to Sjll.
toxypoxy said:
Hello
I am brand new here so I am not sure if I should post a question here or some place else? I started working on installing Lineage OS to my Xperia XZ about 10 days ago with no results. Than I found this thread today after installing Lineage OS on Realme 3 Pro.
Can you explain to me what I am suppose to do here?
2. Flash oem in SW_binaries_for_Xperia_Android_8.1.6.4_r1_v17_tone .zip
Kind Regards
T
Click to expand...
Click to collapse
elm_bacchus said:
1. Backup all your staff.
2. Unlock Bootloader on Sony Xperia XZ
3. fastboot flash recovery twrp-3.3.1-0-kagura.img
4. fastboot flash oem SW_binaries_for_Xperia_Android_8.1.6.4_r1_v17_tone .zip
5. In TWRP --> flash --->zip rom.
6. reboot.
7. İf you have never done such thing before! Research for more info.
Click to expand...
Click to collapse
Unzip it，you need to flash IMG in this zip file.
Sjll said:
Lineage 15.1 for Xperia XZ
Based on SODPBy Sjll
This is a stable and performance version
Download Link: AndroidFileHost
Choose the file named "kagura"
OEM download : Link
How to flash:
1. Wipe Data and flash in twrp
2. Flash oem with SW_binaries_for_Xperia_Android_8.1.6.4_r1_v17_tone.zip
3. Boot and Enjoy.
Feature: Performance, Stable, Gcam support.
Source code: Github
XDA:DevDB Information
Lineage 15.1 for the Sony Xperia XZ
Contributors
Sjll
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.4
Version Information
Status: Stable
Created 2020-03-26
Last Updated 2020-3-26
Click to expand...
Click to collapse
Good project can you up until lineages 16.0 for XZ?
Do I have to first install Oreo base firmware ROM. Latest .192?
Working on it
Sjll said:
Unzip it，you need to flash IMG in this zip file.
Click to expand...
Click to collapse
Hello and thank you and elm_bacchus for quick reply
So this is the status:
1. Backup all your staff. FINISHED
2. Unlock Bootloader on Sony Xperia XZ FINISHED
3. fastboot flash recovery twrp-3.3.1-0-kagura.img FINISHED
4. fastboot flash oem SW_binaries_for_Xperia_Android_8.1.6.4_r1_v17_tone .zip FINISHED But after I did this I always get this message in TWRP : Failed to mount ´/oem´ (Invalid argument) in red letters. TWRP still continues to work but always this message. :silly:
5. In TWRP --> flash --->zip rom. I am assuming this is the file I should Unzip? And flash IMG in TWRP? or ...
6. reboot. Seen SONY logo enough times for today :laugh:
7. İf you have never done such thing before! Research for more info.
---End Quote---
Unzip it，you need to flash IMG in this zip file
Thanks
T
delete
wich gapps is recomended? or there is a specific one that works?
caqo71 said:
Do I have to first install Oreo base firmware ROM. Latest .192?
Click to expand...
Click to collapse
Yup.
seyrarms said:
Good project can you up until lineages 16.0 for XZ?
Click to expand...
Click to collapse
Need time.
toxypoxy said:
Hello and thank you and elm_bacchus for quick reply
So this is the status:
1. Backup all your staff. FINISHED
2. Unlock Bootloader on Sony Xperia XZ FINISHED
3. fastboot flash recovery twrp-3.3.1-0-kagura.img FINISHED
4. fastboot flash oem SW_binaries_for_Xperia_Android_8.1.6.4_r1_v17_tone .zip FINISHED But after I did this I always get this message in TWRP : Failed to mount ´/oem´ (Invalid argument) in red letters. TWRP still continues to work but always this message. :silly:
5. In TWRP --> flash --->zip rom. I am assuming this is the file I should Unzip? And flash IMG in TWRP? or ...
6. reboot. Seen SONY logo enough times for today :laugh:
7. İf you have never done such thing before! Research for more info.
---End Quote---
Unzip it，you need to flash IMG in this zip file
Thanks
T
Click to expand...
Click to collapse
You need to upgrade to latest Oreo FW, the flash oem.img via fastboot or twrp, format data, flash lineage zip in twrp.
Sjll said:
Yup.
Need time.
You need to upgrade to latest Oreo FW, the flash oem.img via fastboot or twrp, format data, flash lineage zip in twrp.
Click to expand...
Click to collapse
Thanks you my hope
SONY Xperia XZ
Quote:
Originally Posted by Sjll
You need to upgrade to latest Oreo FW, the flash oem.img via fastboot or twrp, format data, flash lineage zip in twrp.[/QUOTE]
Thank you and elm_bacchus again for the help
Well well this all went well, most of my time went in to trying to flash the wrong TWRP for XZ but after that, it worked in my second attempt :good:
After flashing the SW binaries and format data I got this message again in TWRP : Failed to mount ´/oem in red letters. But I just continued flashing the ROM in TWRP and it worked like a charm.
Kind regards
T
@Sjll:
It seems that this build doesn't support ExFat on External SDCards, am I right ?
And:
What TWRP-Version do you recommend ? The lastest offical 3.3.1-0 doesn't mount /data, so every time I enter TWRP I have to format data ...
Thanks for this. I followed the instructions and it worked.
I forgot that my SDcard was encrypted and lost my photos but hey ho.
@Sjll is there a git repository for this ROM ?
2faraway2 said:
@Sjll:
It seems that this build doesn't support ExFat on External SDCards, am I right ?
And:
What TWRP-Version do you recommend ? The lastest offical 3.3.1-0 doesn't mount /data, so every time I enter TWRP I have to format data ...
Click to expand...
Click to collapse
Hello
I used twrp-3.3.1-0-kagura and it worked for me.
Regards
T
How about front camera? Does it work properly?
dawidcx3 said:
How about front camera? Does it work properly?
Click to expand...
Click to collapse
It works for me on the F8331 device.
XZs build (keyaki)?
By chance is there a choice for 15.1 for Keyaki? It is stated to choose Kagura, are there other choices for the XZ variants? Would like to update to 8.1, 9, or 10 binaries and read the build instructions from source for Lineage but am wondering if all I need are the kernel binaries to complie Lineage (15.1, 16, 17, 17.1) for the XZS. There is practically nothing for the XZS and it would be helpful to know how to provide other roms for it as well. Any assistance will be greatly appreciated.
Does anyone know what the latest Android security update supported is on this ROM?
Some bugs
Hello, I've been using as my daily for a week now and I've noticed some bugs
1) the camera works but it's bad not even close to stock. The picture is dark and dim.
2) sometimes the wifi doesn't open or close no matter how much you try only restarting the phone helps.
3)sometimes the phone doesn't charge even when it's showing charging.
I hope these bugs can be solved asap because I love this rom its stable, smooth and fast with good battery life. Thanks.
Today i'm sharing you official Android Q Resurrection remix ROM for OnePlus 7 Pro.
I have flashed this rom on my op 7 pro and its running like butter.
Guide/steps to install this rom in your OnePlus 7 Pro
.
.
NOTE: THIS ROM IS ONLY FOR ONEPLUS 7 PRO. DON'T TRY THIS ROM IN OTHER DEVICE.
.
.
.
Here are the steps to install
1.First of all download oxygen os open beta 13 and rom resurrection remix android 10 rom for OnePlus 7 pro.
2.Boot into twrp flash Open Beta 13 then flash twrp then reboot into recovery. Again flash open beta 13 flash twrp.
3. After flashing open beta 13 on both slots (don't forget to flash twrp just after you flash open beta 13) Reboot into recovery again. Then Wipe data, format data.
4. Plug your phone into pc. Transfer all download Files to phone.
5. Flash Resurrection remix Android 10 Rom
6. Flash twrp (Don't flash magisk right now)
7. Again flash twrp
8. Reboot recovery again
9. After rebooting into recovery again flash Resurrection remix Android 10 Rom then again twrp flash
10. Again wipe data dalvik/cache then format data
11. Done. Just reboot your device normally (first boot may take 5-10 minutes)
12. Then setup your device by normal formalities then boot into twrp flash magisk
Done.
(Note: Don't flash Or Download Gapps. Bcz its already included.
Current issue: Nothing.
This Rom is not mine. I just flashed it. And shared a small tutorial here for other OnePlus 7 Pro users.
Have fun.
Download link of resurrection remix Android 10 rom
https://get.resurrectionremix.com/?dir=ten/guacamole/
.
.
.
Credits
Special thanks to @varund7726 as the official dev of this ROM and the RR team @ www.resurrectionremix.com
.
Source
ROM: https://github.com/ResurrectionRemix
Kernel: https://github.com/ResurrectionRemix-Devices/android_kernel_oneplus_sm8150/
.
Wow..fantastic
Very nice..was waiting for
And one more thing to ask are u gujju?
punit1708 said:
Very nice..was waiting for
And one more thing to ask are u gujju?
Click to expand...
Click to collapse
nope. I am not gujrati. But i'm from Rajasthan
vimal suthar said:
nope. I am not gujrati. But i'm from Rajasthan
Click to expand...
Click to collapse
Ok.. bhai link is not there for download?
punit1708 said:
Ok.. bhai link is not there for download?
Click to expand...
Click to collapse
Link is already provided in the post.
Thanks for the heads up. Maybe the ROM will get a proper/official thread from the device maintainer.
FYI: You might want to edit or delete your first screenshot as it shows your phone and IMEI numbers.
10. Again wipe data dalvik/cache then format data
11. Done. Just reboot your device normally (first boot may take 5-10 minutes)
Click to expand...
Click to collapse
I don't think the device will boot after formatting data partition!
How come the flashing instructions require flashing Beta/RRR/TWRP so many times with so many reboots between? And formatting data etc after flashing?
Has anyone else had success with flashing the ROM as per OP instructions? Running OB13 just want to confirm the instructions work
JIMMMEHHHH said:
How come the flashing instructions require flashing Beta/RRR/TWRP so many times with so many reboots between? And formatting data etc after flashing?
Has anyone else had success with flashing the ROM as per OP instructions? Running OB13 just want to confirm the instructions work
Click to expand...
Click to collapse
I tried by myself bro. It is the only way to successfull flash.
Toutatis_ said:
Thanks for the heads up. Maybe the ROM will get a proper/official thread from the device maintainer.
FYI: You might want to edit or delete your first screenshot as it shows your phone and IMEI numbers.
I don't think the device will boot after formatting data partition!
Click to expand...
Click to collapse
I didn't said wipe system bro. Just format data and type YES that's it
Where is source code for rom??
This thread will be closed...read the rules for posting new thread on this forum...you must have link to source code of the rom...Its nice that you want to share that RR is out for OP7pro, but this is not a way to do that
you are not a developer of this rom, so you dont have permision to post it here..
And second, your flashing instruction are too confusing, i seriosly doubt that you must be on beta OOS to flash RR.
scrin378 said:
Where is source code for rom??
This thread will be closed...read the rules for posting new thread on this forum...you must have link to source code of the rom...Its nice that you want to share that RR is out for OP7pro, but this is not a way to do that
you are not a developer of this rom, so you dont have permision to post it here..
And second, your flashing instruction are too confusing, i seriosly doubt that you must be on beta OOS to flash RR.
Click to expand...
Click to collapse
Thanks for this, I thought the flashing instructions seemed convoluted.
scrin378 said:
Where is source code for rom??
This thread will be closed...read the rules for posting new thread on this forum...you must have link to source code of the rom...Its nice that you want to share that RR is out for OP7pro, but this is not a way to do that
you are not a developer of this rom, so you dont have permision to post it here..
And second, your flashing instruction are too confusing, i seriosly doubt that you must be on beta OOS to flash RR.
Click to expand...
Click to collapse
I don't care bro if they delete this post. I just wanted to share this and i did. And yes you have to on open beta 13 else you will get bootloop
vimal suthar said:
I don't care bro if they delete this post. I just wanted to share this and i did. And yes you have to on open beta 13 else you will get bootloop
Click to expand...
Click to collapse
You are wrong buddy.
1. I installed on top of the stable OOS.
2. No need of flashing the ROM 2 times, once is fine and no need to wipe data after flashing OOS.
3. if anyone is decrypted no need of formatting data, wiping data is fine.
How is the vibration, brightness and fp speed?
Niki Exodia007 said:
You are wrong buddy.
1. I installed on top of the stable OOS.
2. No need of flashing the ROM 2 times, once is fine and no need to wipe data after flashing OOS.
3. if anyone is decrypted no need of formatting data, wiping data is fine.
Click to expand...
Click to collapse
Then you can go and have try brother. ?
vimal suthar said:
Then you can go and have try brother. ?
Click to expand...
Click to collapse
I am already using it.
Dbj.Dhaval said:
How is the vibration, brightness and fp speed?
Click to expand...
Click to collapse
All are working fine. But i felt that vibration is high. I mean vibration strength is much higher than Oxygen OS. This is only my opinion.
You know there's a section for this, its called Guides , NEWS and Discussion
just curious is the FP is gonna flicking the screen while unlocking? or is not because i don't really like the flicking screen during the unlocking process