Database Develop

New Update for ALE-L21 (ALE-L21C432B170)

as the downspeed from huawei is rly crappy i upped the new update.zip here - http://d-h.st/tpZz - ive got the ALE-L21 dualsim kirin variant no sim lock bought it in a store and not via any provider
i myself havent flashed it yet cause i dont have the time to play around with it
as said before its the ALE-L21C432B170 release as im living in austria central europe and as native german speaker it should be for this region
Be AWARE im not responsible for any damage on your phone if you flash this update.zip
as im rooted and have twrp running i cant flash it via twrp cause twrp cant mount the cache will try the fastboot method in the afternoon if somebody had success with fastboot method or any other method plz let me know
any suggestions regarding flashing this update would be nice
if youre not rooted and dont run twrp u can try to copy the update.zip to your internal memory dir "HwOUC" and try to update via the emui update tab in your settings
if this was helpfull dont forget to hit the thx button

The udpdate to B170 is possible only from B046, B052 and B132. NOT from B136!!!

How can the update be done from B136?
Downgrade to B052, B046.
OTA update also not available?

klsystem1 said:
How can the update be done from B136?
Downgrade to B052, B046.
OTA update also not available?
Click to expand...
Click to collapse
Yes, I recommend you to downgrade to B132, after that you will be able to update to B170 via OTA.

Downgrade with sd card update to B132?
I made dual sim with flashing from B133 to B041c, B46,B52,B136. From B136 possible to B132, B170 and B200?

i have a B133 (Telekom) i have the TWRP on my phone and when i want to update via Updater to B171 and when i have downloaded it restarted to the TWRP and it did not do anything :/ it should boot to the system recovery ... how can i update if i have twrp ?

I have b130 install on my p8 lite L21 can i install this and how
Sent from my ALE-L21 using Tapatalk

Cris4524 said:
Yes, I recommend you to downgrade to B132, after that you will be able to update to B170 via OTA.
Click to expand...
Click to collapse
Have you got a link for B132? Dual Sim present at this version? Flashing by using Update.app on sdcard? Has anyone tried flashing back from B136 to B132 yet?
Thanks

Hello,
Also have ALE-L21...B133, and received the B171 update.zip, and i also have root and twrp recovery.
I suppose you can't just install the zipfile with twrp, or can i. Or is someone gonna create a package which we can install with twrp? thanks.

When i install the update through TWRP i get an error. So that method doesn't work.

Sorry for my double-post, but I would like to add this information here also.
I can not update my phone from b133 to b171 (ota). The update stops around 4% with an error and I have to restart the phone. Phone is not rooted or unlocked. I have set the phone to factory defaults but it doesn't help, also tested it with and without an SD card. Does anyone recognize this update problem or do I have to wait for huawei to fix this (maybe) broken update package?
Thank you!

Dutn said:
Sorry for my double-post, but I would like to add this information here also.
I can not update my phone from b133 to b171 (ota). The update stops around 4% with an error and I have to restart the phone. Phone is not rooted or unlocked. I have set the phone to factory defaults but it doesn't help, also tested it with and without an SD card. Does anyone recognize this update problem or do I have to wait for huawei to fix this (maybe) broken update package?
Thank you!
Click to expand...
Click to collapse
On my dad's phone als not rooted or unlocked it also gets stuck at 4% so maybe the update is broken.

Quote:
Originally Posted by Dutn
Sorry for my double-post, but I would like to add this information here also.
I can not update my phone from b133 to b171 (ota). The update stops around 4% with an error and I have to restart the phone. Phone is not rooted or unlocked. I have set the phone to factory defaults but it doesn't help, also tested it with and without an SD card. Does anyone recognize this update problem or do I have to wait for huawei to fix this (maybe) broken update package?
Thank you!
On my dad's phone als not rooted or unlocked it also gets stuck at 4% so maybe the update is broken.
Click to expand...
Click to collapse
same problem here.
any suggestion?

Just updated.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Same problem with my 2 p8 lite phones.. Tried to install the b171 ota update,
I sent a screenshot and movie with the error to Huawei Netherlands by facebook messenger...
If I get an update I will post it here.

hamid reza said:
same problem here.
any suggestion?
Click to expand...
Click to collapse
same here...
Inviato dal mio ALE-L21 utilizzando Tapatalk

I have the same problem, error on 4% updating!

raalterjeroen said:
Same problem with my 2 p8 lite phones.. Tried to install the b171 ota update,
I sent a screenshot and movie with the error to Huawei Netherlands by facebook messenger...
If I get an update I will post it here.
Click to expand...
Click to collapse
Great, I also contacted Huawei for this error. I found on Facebook that this release was scheduled for November and maybe released to soon. Lets wait then.

Dutn said:
Sorry for my double-post, but I would like to add this information here also.
I can not update my phone from b133 to b171 (ota). The update stops around 4% with an error and I have to restart the phone. Phone is not rooted or unlocked. I have set the phone to factory defaults but it doesn't help, also tested it with and without an SD card. Does anyone recognize this update problem or do I have to wait for huawei to fix this (maybe) broken update package?
Thank you!
Click to expand...
Click to collapse
also have the same problem my wife's p8lite b133 to b171 stops to 4%

OK so had the update there this morning and now it seem Huawei know there is an issue as the phone is saying there is no updates available. Like others on here my update downloaded last night but wouldn't install properly breaking at the 4% mark.
Guess its gonna be dropping again at some point today.

Huawei Mate S Firmware CRR-L09C432B361 [MM][EMUI4.0.1][OTA]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Rollout of CRR-L09C432B361 startet yesterday.
Some Bugfixes, Update EMUI from 4.0 to 4.0.1 and latest Google Security Patches.
Download of OTA available via source: http://www.huaweiblog.de/downloads/huawei-mate-s-b361-firmware-update-ota-download/
Nice to see, Huawei still optimizing their firmwares. After all the buggy ones, this seems to be stable and fast.

ml_taz said:
Rollout of CRR-L09C432B361 startet yesterday.
Some Bugfixes, Update EMUI from 4.0 to 4.0.1 and latest Google Security Patches.
Download of OTA available via source: http://www.huaweiblog.de/downloads/huawei-mate-s-b361-firmware-update-ota-download/
Nice to see, Huawei still optimizing their firmwares. After all the buggy ones, this seems to be stable and fast.
Click to expand...
Click to collapse
Nice, did you install it, can I install it over B177?
Thanks in advance for your reply.

Feroztex said:
Nice, did you install it, can I install it over B177?
Thanks in advance for your reply.
Click to expand...
Click to collapse
I think you must update it from B321 to B621.

@Feroztex
I did a rollback to B145 because the HiCare App under B321 said the B361 update is available, but the updater had no B361.
After the rollback I installed OTA B177 and then got immediately the B361 Update. So I think you can install it over B177.

I'm in B321 but when i want to upgrade for "*#*#2846579#*#*" it says that it's not archives in dload...and it is (update.zip), i tried upgrade for direct access (Volumen UP + Volumen DOWN + Power Button) but it says that upgrade failed!. Help please :S

sebastassara said:
I'm in B321 but when i want to upgrade for "*#*#2846579#*#*" it says that it's not archives in dload...and it is (update.zip), i tried upgrade for direct access (Volumen UP + Volumen DOWN + Power Button) but it says that upgrade failed!. Help please :S
Click to expand...
Click to collapse
Same here - In my case I'm currently on C900B321 instead of C432B321, I think that this is the problem.

sebastassara said:
I'm in B321 but when i want to upgrade for "*#*#2846579#*#*" it says that it's not archives in dload...and it is (update.zip), i tried upgrade for direct access (Volumen UP + Volumen DOWN + Power Button) but it says that upgrade failed!. Help please :S
Click to expand...
Click to collapse
Did you place the update.zip in "dload" folder? And "dload" must be in root directory of your SD card.

sebastassara said:
I'm in B321 but when i want to upgrade for "*#*#2846579#*#*" it says that it's not archives in dload...and it is (update.zip), i tried upgrade for direct access (Volumen UP + Volumen DOWN + Power Button) but it says that upgrade failed!. Help please :S
Click to expand...
Click to collapse
Same problem here. Currently CRR-L09C432B321 version, not rooted device, and not a company device. :crying:
I've tried these different methods to upgrade:
*#*#2846579#*#*
Installs, but nothing happened. (Updates really fast, so, I think that it is doing nothing and just skips the update).
Volumen UP + Volumen DOWN + Power Button
Upgrade crashes at 5%.
MyCare
No updates available.
Maybe I am doing some step wrong? I just format an micro sd card, create a folder named dload/ on root and paste the "update.zip" inside of it.
Thanks in advance for any help you could provide.

fbsfelony said:
Same here - In my case I'm currently on C900B321 instead of C432B321, I think that this is the problem.
Click to expand...
Click to collapse
You are right, I'm in C900B321....so what can we do now?
---------- Post added at 12:03 PM ---------- Previous post was at 12:01 PM ----------
ml_taz said:
Did you place the update.zip in "dload" folder? And "dload" must be in root directory of your SD card.
Click to expand...
Click to collapse
yes, but i realized that I'm in C900B321 and not C432B321.
Some know's what can i do to upgrade?

sebastassara said:
You are right, I'm in C900B321....so what can we do now?
---------- Post added at 12:03 PM ---------- Previous post was at 12:01 PM ----------
yes, but i realized that I'm in C900B321 and not C432B321.
Some know's what can i do to upgrade?
Click to expand...
Click to collapse
I think I've read here on xda that you can change your region / vendor or whatever to fit it to the right version number. But I haven't done it and I wont, I just removed root because I'm going to sell my phone (I can't stand the fact that there are absolutely no custom roms out there), and afaik you need root to change that file. Just search a bit, you will find something

emey87 said:
Same problem here. Currently CRR-L09C432B321 version, not rooted device, and not a company device. :crying:
I've tried these different methods to upgrade:
*#*#2846579#*#*
Installs, but nothing happened. (Updates really fast, so, I think that it is doing nothing and just skips the update).
Volumen UP + Volumen DOWN + Power Button
Upgrade crashes at 5%.
MyCare
No updates available.
Maybe I am doing some step wrong? I just format an micro sd card, create a folder named dload/ on root and paste the "update.zip" inside of it.
Thanks in advance for any help you could provide.
Click to expand...
Click to collapse
EDIT: Deleted

fbsfelony said:
I think I've read here on xda that you can change your region / vendor or whatever to fit it to the right version number. But I haven't done it and I wont, I just removed root because I'm going to sell my phone (I can't stand the fact that there are absolutely no custom roms out there), and afaik you need root to change that file. Just search a bit, you will find something
Click to expand...
Click to collapse
Hi man, i already change the region to C432 sucessfully, but it's the same i cant upgrade and appears the sames errors

delete me plz

Can´t get OTA B361 ??
B321 to B361 the way for me
Starting situation: Mate S B321 rooted.
Rollback B321 to B300
B300 to B145(full)
OTA B177
B177 to B361: update.zip in dload (intern memory) and now make a lokal Update from EMUI 3.0
have fun with B361
download:
update.zip: h-t-t-p-s-:-/-/-m-e-g-a-.-n-z-/#!aV1xxSqS!n3Z1IjdHQ6OWRcdl_qJvR63siDb7-kAyGYGSATd8WxU
pls remove the first 15 "-"

RonPo said:
B321 to B361 the way for me
Starting situation: Mate S B321 rooted.
Rollback B321 to B300
B300 to B145(full)
OTA B177
B177 to B361: update.zip in dload (intern memory) and now make a lokal Update from EMUI 3.0
have fun with B361
download:
update.zip: h-t-t-p-s-:-/-/-m-e-g-a-.-n-z-/#!aV1xxSqS!n3Z1IjdHQ6OWRcdl_qJvR63siDb7-kAyGYGSATd8WxU
pls remove the first 15 "-"
Click to expand...
Click to collapse
Hey RonPo do you now have full marshmallow from your B177 update ? as i have read the update . zip is a incremental update and not a full update. B177 was lollipop. so please clarify for me. also the file in your link is 1.05 gb so it would suggest a full update but it says HwOUC.zip . does the file need to be extracted? is there an update . zip or update.app in there?
---------- Post added at 09:24 AM ---------- Previous post was at 09:10 AM ----------
Would anyone be so kind as to upload that file to another mirror other than Mega? Files greater that 1gb have problems to download. i would be greatful.

Hi omniajet.
Yes from B177. Extract the HwOUCH.zip. Get the update.zip (1,113GB) and give it in the dload Folder on the intern SD.
Make a lokal update from the updateprogramm EMUI 3.1
You need a separatly Mega-Plugin for your Browser (Mozilla) for greater than 1GB-Files.

ok thank you just trying it now
So now i seem to be upto date on B361 however i have come across something very strange. my phone is originally a C900 model it came with b300 installed on it . i have since sucessfully upgraded to c432b145, and C432b177 but everytime i go to any sort of marshmallow, it reverts to C900. I rolled back to B300 two times the first i upgraded all the way back to B177 and it was fine showing C432 but when i attempted to put B321 on it. it showed C900b321 on it although i downloaded C432B321.
Now i have again rolled back and upgraded to B177 and now i am showing C900B361. very strange but i will see how i get on with this. thanks for all your help.
PS i used opera for windows to downlaod the mega file hassel free. chrome and the mozilla plugin did not work

You are welcome!

Build number
Does anyone else have the build CRR-L09C469B120? Also does anyone know the region this build is for? Can's seem to find the build number anywhere. sigh

Which countries apart from Germany got OTA update from B321 to B361 so far?
Sent from my Huawei Mate S using Tapatalk

Huawei Firm Finder

Can anyone tell me, how to install a software from Firmware Finder. I download it via proxy and move it to dload folder and extract the zipp. But when turn off the phone press all 3 buttons ( Vol + , Vol - and power) update goes to 5% and after some seconds gaves me error " Cannot unpack the pacage please download it again", I tryed many times, still the same error. Any other ways to install new update from 5 april 2017?

Hi, what is your phone model? And the package you tried? Because i had the same problem, and i tried a different OTA in the list, it worked fine.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

zbegri said:
Hi, what is your phone model? And the package you tried? Because i had the same problem, and i tried a different OTA in the list, it worked fine.
Click to expand...
Click to collapse
My model is nem-l21 and the pacage is nem-l21c432b132 from 5 .04. 2017 new features are for NFC on strat up and improvments for google duo wats up and other that i wont remember

cropp7 said:
My model is nem-l21 and the pacage is nem-l21c432b132 from 5 .04. 2017 new features are for NFC on strat up and improvments for google duo wats up and other that i wont remember
Click to expand...
Click to collapse
you need to install older 132 firmware. its just different date but build is same.

thelous said:
you need to install older 132 firmware. its just different date but build is same.
Click to expand...
Click to collapse
Yesterday i install the firmware from FullOTA post here and still nothing.

cropp7 said:
Yesterday i install the firmware from FullOTA post here and still nothing.
Click to expand...
Click to collapse
Do you have twrp or stock recovery? s5ogk recovery is needed to install OTA's. also whats your current rom version?

thelous said:
Do you have twrp or stock recovery? s5ogk recovery is needed to install OTA's. also whats your current rom version?
Click to expand...
Click to collapse
My software version is NEM-L21C432B132 but older version from that i want to install and i install it with basic method via sd card and 3 buttons. Stock recovery no TWRP and locked bootloader. I install the firmware finder app from play store install the addon after that send the update to system actoalizator then make proxy on my wi-fi then download it and waith till restart automaticly for the installation , and after reboot in system actualisation its began with "verify update" goest to 5 % and change to Install updates and a few seconds its gethin the red symbol and error sayng "Can't unpack the pacage, download it again" i tryed with pc app and donwload it from them extract the zip take the UPDATE.APP and pasted in dload on my sd card, again the 3 button method and again the sam erorr. I gate and the error "Faild to upgrade, get help from <EMUI site> I get pissed of and stop with the update but i want the NFC function cuz all my friends have it and is better to transfer files. Now i test cynogenmod 13 and can found the camera but if u get me a stable advice for the update i will install it and roll back to marshmallow

cropp7 said:
My software version is NEM-L21C432B132 but older version from that i want to install and i install it with basic method via sd card and 3 buttons. Stock recovery no TWRP and locked bootloader. I install the firmware finder app from play store install the addon after that send the update to system actoalizator then make proxy on my wi-fi then download it and waith till restart automaticly for the installation , and after reboot in system actualisation its began with "verify update" goest to 5 % and change to Install updates and a few seconds its gethin the red symbol and error sayng "Can't unpack the pacage, download it again" i tryed with pc app and donwload it from them extract the zip take the UPDATE.APP and pasted in dload on my sd card, again the 3 button method and again the sam erorr. I gate and the error "Faild to upgrade, get help from <EMUI site> I get pissed of and stop with the update but i want the NFC function cuz all my friends have it and is better to transfer files. Now i test cynogenmod 13 and can found the camera but if u get me a stable advice for the update i will install it and roll back to marshmallow
Click to expand...
Click to collapse
there is no "new" version of 132.

thelous said:
there is no "new" version of 132.
Click to expand...
Click to collapse
By Huawei Firm Finder there is version wich comes out on 5.04.2017 before 6 days
https://imgur.com/usjfPkR here the link with screenshot from my phone

cropp7 said:
By Huawei Firm Finder there is version wich comes out on 5.04.2017 before 6 days
https://imgur.com/usjfPkR here the link with screenshot from my phone
Click to expand...
Click to collapse
its still 132.... you wont be able to flash sane version of firmware. if it was newer it would be b134 or 141 etc, not 132.

The "new" B132 is rollback update(firmware) to Android 6.0 (Found in changelog). Maybe its little "signal" to us that Android 7.0 (Official) is coming.
Do you have NEM-L21? Then how did you get work NFC? I have NEM-L21C432B132, but I think my device have not NFC (I think L21 has fingerprint, and L51 has NFC but no fingerprint)

FirstMn said:
The "new" B132 is rollback update(firmware) to Android 6.0 (Found in changelog). Maybe its little "signal" to us that Android 7.0 (Official) is coming.
Do you have NEM-L21? Then how did you get work NFC? I have NEM-L21C432B132, but I think my device have not NFC (I think L21 has fingerprint, and L51 has NFC but no fingerprint)
Click to expand...
Click to collapse
I don't have NFC , but in that upgrade of the b132 software in the changelog is typed "added NFC fucntion on startup or boot up " so that makes my so madly to ask that update. But with all advices that other in post gives my nothing hapent, i install b130 and download the software again and still nothing, now erorr was "Can't .... find help and emui site url" dont remember the whole erorr messege

cropp7 said:
I don't have NFC , but in that upgrade of the b132 software in the changelog is typed "added NFC fucntion on startup or boot up " so that makes my so madly to ask that update. But with all advices that other in post gives my nothing hapent, i install b130 and download the software again and still nothing, now erorr was "Can't .... find help and emui site url" dont remember the whole erorr messege
Click to expand...
Click to collapse
theres no nfc, update doesnt change anything. you cant have nfc as theres no nfc chip installed inside phone. you can buy external nfc gadget i think since NEM-L21 has OTG support.

Could it be a roll back from nougat to marshmallow build?

thelous said:
theres no nfc, update doesnt change anything. you cant have nfc as theres no nfc chip installed inside phone. you can buy external nfc gadget i think since NEM-L21 has OTG support.
Click to expand...
Click to collapse
So acording to you , my information is wrong , that explain why it's giving me erorr

Yes, it's the same version, still, no emui 5.0 yet for your model.

From C900 to C432

Hi, I have a Honor 5C. I found a guide on hihonor forum for downgrading from Nogaut to MM, everything went, but if I go in the info it says "model number hi6250" and build number "NEM-C900B151", which are not mine. How do I put the NEM-L51C432B130 ROM I had before?

dont use hihonor next time... you should have extracted uödate.aöp f4om B100 and flawh wit with 3 buttons....

What can I do now? Nothing?

McCartney said:
What can I do now? Nothing?
Click to expand...
Click to collapse
try correct B100 update.app thru 3 buttons.... if this doesnt work try flashing recovery etc thru adb and then try 3 buttons. that should do it. make sure all files are correct ones, messing with recovery can lead to hard brick.

thelous said:
try correct B100 update.app thru 3 buttons.... if this doesnt work try flashing recovery etc thru adb and then try 3 buttons. that should do it. make sure all files are correct ones, messing with recovery can lead to hard brick.
Click to expand...
Click to collapse
I've already tried flashing the B120 and the B130 but it does not work. The only way is to put the TWRP? And since my phone is now recognized as "hi6250" there may be problems?

McCartney said:
I've already tried flashing the B120 and the B130 but it does not work. The only way is to put the TWRP? And since my phone is now recognized as "hi6250" there may be problems?
Click to expand...
Click to collapse
try installing stock recovery.img again thru adb, i dont remember all img files you need to make new recovery work and try it then, its in xda anyways.

McCartney said:
Hi, I have a Honor 5C. I found a guide on hihonor forum for downgrading from Nogaut to MM, everything went, but if I go in the info it says "model number hi6250" and build number "NEM-C900B151", which are not mine. How do I put the NEM-L51C432B130 ROM I had before?
Click to expand...
Click to collapse
Similar thing happened to me from messing about flashing different recoveries and roms. Went from c432 to c900. The only difference is that c432 is European region and c900 is global. It worked fine all the while it was showing c900 but I just put the update.app from b130 in dload folder on sd card and used 3 button method. You lose all your data but we all do backups-you too I'm sure, so no problems there.
Sent from my NEM-L51 using XDA Labs

In the next day try with unlock bootloder and TWRP. It's the only way.

Do you think this rollback Russian (screen) and then the c432, can I solve it?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

hi, do you managed to rollback to NEM-L51C432B130, i have de same problem. thanks

wilcaro said:
hi, do you managed to rollback to NEM-L51C432B130, i have de same problem. thanks
Click to expand...
Click to collapse
What it is your current firmware?!

PalakMi said:
What it is your current firmware?!
Click to expand...
Click to collapse
this is a honor 5c nem-l51 it was on nougat and i returned to marshmallow
now i have:
model: hi6250
build: NEM-C900B072
EMUI 4.1.1
android: 6.0
and finally i want to return on nougat
how to do this ?
thank you for your reply

wilcaro said:
this is a honor 5c nem-l51 it was on nougat and i returned to marshmallow
now i have:
model: hi6250
build: NEM-C900B072
EMUI 4.1.1
android: 6.0
and finally i want to return on nougat
how to do this ?
thank you for your reply
Click to expand...
Click to collapse
You simply need to change from C900 to C432 (sorry but I don't know how)

PalakMi said:
You simply need to change from C900 to C432 (sorry but I don't know how)
Click to expand...
Click to collapse
this is the problem
thanks anyway

wilcaro said:
this is the problem
thanks anyway
Click to expand...
Click to collapse
It is bad that honor didn't release nougat for C900 5C, you only got to change cust to C432

PalakMi said:
It is bad that honor didn't release nougat for C900 5C, you only got to change cust to C432
Click to expand...
Click to collapse
i found many users that have this problem but no solution

That's even worse

I really understand your problem, I spent hours and hours finding a solution, and I managed to find it, and it's not that hard.
1. Download Firmware Finder via Google Play Store.
2. Open it, swipe to the right, and tap on settings.
3. Tap on Use proxy to install. It will ask you to download another app, go ahead and do it.
4. Now go back to Firmware Finder and tap on "Add model", and then input the model you have without the Bxxx firmware number.
5. Tap on the model number in the main menu, and select the B351 firmware that is 2.01GB in size. You will see "FullOTA-MF-PV" under it. This is crucial for the update to be successful.
6. Now tap on "Get an update through proxy"
7. Go to your WiFi settings, press and hold on your network and go to Modify
8. Now, go to Advanced Options and enter a manual proxy. The adress is "localhost" and the port is "8.8.8.8"
9. Now, go to your Updater and download the firmware as a regular update.
10. You should be good to go! If the update hangs, go ahead and delete the proxy, and the update will finish. The nice thing is that it doesn't affect your data!
Hope it helped!

firmware finder 10.0.0.159

Anyone had a crack at installing this yet. It says it's ok for instillation

dlevick said:
Anyone had a crack at installing this yet. It says it's ok for instillation
Click to expand...
Click to collapse
I tried but without success:
https://forum.xda-developers.com/showpost.php?p=82397809&postcount=22

braunie said:
I tried but without success:
https://forum.xda-developers.com/showpost.php?p=82397809&postcount=22
Click to expand...
Click to collapse
My original firmware P20 Pro is C432
I got it working with the following config
You need HiSuite Proxy + Hisuite
https://forum.xda-developers.com/showpost.php?p=82469033&postcount=1585
(this is not the exact link but use the keywords and id given below)
CLT-LGRP2-OVS 10.0.0.159 http://update.dbankcdn.com/TDS/data/...55/v386542/f1/
CLT-AL00-CUST 10.0.0.170(C00) http://update.dbankcdn.com/TDS/data/...55/v387582/f1/
CLT-AL00l-PRELOAD 10.0.0.4(C00R1) http://update.dbankcdn.com/TDS/data/...55/v347044/f1/
One thing that was different.
After it finished recovery, I quickly unplugged the USB before my PC could recognise my phone and before my phone finished restarting.
Possibly after phone rebooting the first time, my phone tries to send a package to hisuite but it didn't get the right response or something which causes it to have an invalid signature or something.
So yeah make sure to unplug your USB as soon as it finishes, do not wait til it rebooted

blue_panther9_9 said:
My original firmware P20 Pro is C432
I got it working with the following config
You need HiSuite Proxy + Hisuite
https://forum.xda-developers.com/showpost.php?p=82469033&postcount=1585
(this is not the exact link but use the keywords and id given below)
CLT-LGRP2-OVS 10.0.0.159 http://update.dbankcdn.com/TDS/data/...55/v386542/f1/
CLT-AL00-CUST 10.0.0.170(C00) http://update.dbankcdn.com/TDS/data/...55/v387582/f1/
CLT-AL00l-PRELOAD 10.0.0.4(C00R1) http://update.dbankcdn.com/TDS/data/...55/v347044/f1/
One thing that was different.
After it finished recovery, I quickly unplugged the USB before my PC could recognise my phone and before my phone finished restarting.
Possibly after phone rebooting the first time, my phone tries to send a package to hisuite but it didn't get the right response or something which causes it to have an invalid signature or something.
So yeah make sure to unplug your USB as soon as it finishes, do not wait til it rebooted
Click to expand...
Click to collapse
Anyone else verify this yet?

Is there a walkthrough somewhere to get this hisuite proxy to work. Having difficulties getting this to happen. Firmware finder was so much handier ?

Any attempts to root yet, or how's the status of the bootloader after 10.?
I am very tempted to try it, but it can't root, I'd rather get a new phone

blue_panther9_9 said:
My original firmware P20 Pro is C432
I got it working with the following config
You need HiSuite Proxy + Hisuite
https://forum.xda-developers.com/showpost.php?p=82469033&postcount=1585
(this is not the exact link but use the keywords and id given below)
CLT-LGRP2-OVS 10.0.0.159 http://update.dbankcdn.com/TDS/data/...55/v386542/f1/
CLT-AL00-CUST 10.0.0.170(C00) http://update.dbankcdn.com/TDS/data/...55/v387582/f1/
CLT-AL00l-PRELOAD 10.0.0.4(C00R1) http://update.dbankcdn.com/TDS/data/...55/v347044/f1/
One thing that was different.
After it finished recovery, I quickly unplugged the USB before my PC could recognise my phone and before my phone finished restarting.
Possibly after phone rebooting the first time, my phone tries to send a package to hisuite but it didn't get the right response or something which causes it to have an invalid signature or something.
So yeah make sure to unplug your USB as soon as it finishes, do not wait til it rebooted
Click to expand...
Click to collapse
Hi! Can you share a walk-through from the beginning please. I am having trouble making HISuite Proxy and Hisuite work. Every time I try I get "No internet Connection". Also I would like to how to write the Package URL, I copy the complete link upto *.zip however it only pastes uptill */f1/
Looking forward to your reply.

There is a way to do it in firmware finder post here in the forum, but you need to know that your phone will be rebranded to the Chinese firmware, so for me has no sense to do it, I can wait one month more until official release ?
kamranyusuf said:
Hi! Can you share a walk-through from the beginning please. I am having trouble making HISuite Proxy and Hisuite work. Every time I try I get "No internet Connection". Also I would like to how to write the Package URL, I copy the complete link upto *.zip however it only pastes uptill */f1/
Looking forward to your reply.
Click to expand...
Click to collapse

Luis2k33-XDA said:
There is a way to do it in firmware finder post here in the forum, but you need to know that your phone will be rebranded to the Chinese firmware, so for me has no sense to do it, I can wait one month more until official release
Click to expand...
Click to collapse
Thank you! I think I will wait for another month or two before trying the methods in the firmware finder. As I have read people have soft brink their phones trying to do it.

You must warning the people that the phone with this method is rebranded to Chinese firmware clt-l00
blue_panther9_9 said:
My original firmware P20 Pro is C432
I got it working with the following config
You need HiSuite Proxy + Hisuite
https://forum.xda-developers.com/showpost.php?p=82469033&postcount=1585
(this is not the exact link but use the keywords and id given below)
CLT-LGRP2-OVS 10.0.0.159 http://update.dbankcdn.com/TDS/data/...55/v386542/f1/
CLT-AL00-CUST 10.0.0.170(C00) http://update.dbankcdn.com/TDS/data/...55/v387582/f1/
CLT-AL00l-PRELOAD 10.0.0.4(C00R1) http://update.dbankcdn.com/TDS/data/...55/v347044/f1/
One thing that was different.
After it finished recovery, I quickly unplugged the USB before my PC could recognise my phone and before my phone finished restarting.
Possibly after phone rebooting the first time, my phone tries to send a package to hisuite but it didn't get the right response or something which causes it to have an invalid signature or something.
So yeah make sure to unplug your USB as soon as it finishes, do not wait til it rebooted
Click to expand...
Click to collapse

Used Hisuite and Hisuite proxy to move my P20 Pro CLT-L04 (Canada) to android 10.0.0.159
Everything work. I will post more about the process and effects later.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
fb

fbriere56 said:
Used Hisuite and Hisuite proxy to move my P20 Pro CLT-L04 (Canada) to android 10.0.0.159
Everything work. I will post more about the process and effects later.
fb
Click to expand...
Click to collapse
By any chance would you post the process getting it to work, cheers

Look at your private message I can't post URL because my profile is too new.
You have all the information in the private messages that I have send to you.
Screenshot for the others:
fb

Warning: Today my phone is showing as not certified.
Booting into the bootloader... I have many options now. (update via usb etc)
For now don't do it if you don't understand what you are doing.

fbriere56 said:
Warning: Today my phone is showing as not certified.
Booting into the bootloader... I have many options now. (update via usb etc)
For now don't do it if you don't understand what you are doing.
This is looking like my bootloader is unlocked now.
Click to expand...
Click to collapse
I won't do it at all so, seems like it's not worth the risk, but thank you for sending the messages.

I'm doing the update in a different way right now. Using PRELOAD and CUST from 9.1 and my region (Canada) C792.
If it work, the phone will be certified.
fb

fbriere56 said:
I'm doing the update in a different way right now. Using PRELOAD and CUST from 9.1 and my region (Canada) C792.
If it work, the phone will be certified.
fb
Click to expand...
Click to collapse
Let us know the results please. Thanks

I inatalled emui 10 on my p20 pro with you settings today and everything is working just fine.

It's normal, cause maybe 159 firmware is not out and verified from Huawei and Google, it's happened sometimes with my phone when I updated firmware through modded hisuite, let me know if your method of update with cust and preload of your region of 9.1 works
Regards
fbriere56 said:
Warning: Today my phone is showing as not certified.
Booting into the bootloader... I have many options now. (update via usb etc)
For now don't do it if you don't understand what you are doing.
This is looking like my bootloader is unlocked now.
Click to expand...
Click to collapse

@fbriere56
Did you try to root version 10?