Database Develop

[ROM][CyanogenMod 13 ][02/03/2016][ 6.0.1][tomato]CM 13 for Yureka

This is a initial Work in Progress CM13 release for Yu yureka.
Release notes :
What works ?
Wifi
Bluetooth
All functionality of RIL
Camera
All other basic functionalities ( Basic apps seem to be working )
Titanium backup works fine
You say more !
Broken stuff :
None as far as i know
Flashing procedure :
General steps ( Wipe cache/data and wipe dalvik )
Flash ROM zip and then gapps immediately
Reboot and have fun
Downloads :
CM13 initial release for Yu yureka
XDA:DevDB Information
CyanogenMod 13, ROM for the YU Yureka
Contributors
Santhosh M
Source Code: https://github.com/CyanogenMod/android_kernel_cyanogen_msm8916
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 5.0
Beta Release Date: 2016-03-02
Created 2015-11-08
Last Updated 2016-05-01

Reserved
FAQ

Reserved
One more

Downloading!
Will update on its working tomorrow!
---------- Post added at 03:06 PM ---------- Previous post was at 03:05 PM ----------
By the way, Gapps working? If yes, which?

Slim gapps are working fine..
Sent from my AO5510 using Tapatalk

Great Job!
I was just going to work on this unofficial build but you won the race man @Santhosh M. Just checked and found this build before I started compiling and gave a try on my Yureka. Amazingly everything works like charm except RIL data. I guess you are missing some flags in RIL. Anyway here is my detail review after trying it over 2 hours.
* Flashed the ROM with SLimGaaps (Link: https://www.androidfilehost.com/?fid=24269982086989483). OP please mentioned it above.
* It tooks aprox 20 minutes on first boot
* I did the clean flash (wiped everything, [DON'T Wipe internal storage unless backup]) over official cm 12.1
* Surprisingly its restored all my previous apps data with defaults settings. Might be it is an android 6.0 new feature because I am using MarshMallow first time. Usually on android 5.+ if we do clean flash its removed all app data and restored it later one by one else we just do dirty flash to retain old data.
* Flashed SD_boot and its fixed the external SD too.
* Got some apps FC (ex. Line), to fixed that just uninstall those and reinstall again. Its becouse of old app's data lib.
* Got Facebook FC continuously even after fresh install and Its because of boringssl and crypto in cm-13. To fix that Facebook / Messenger FC error, just go to /data/app/com.facebook.katana-1/lib/arm and delete or rename the libsslx.so or /data/app/com.facebook.orca-1/lib/arm (Must be enabled ROOT).
*Still exploring the ROM
Rest everything works like charm and its very much stable except SIM DATA. I hope you must fixed this very soon.

During first boot into CM13 is it forcing you to encrypt the phone by default? I read somewhere that Marshmallow mandates the phone to be encrypted. If this ROM supports encryption it will be great.

Reserved for a big review on YU5510

Santhosh M said:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is a initial Work in Progress CM13 release for Yu yureka. It is bound to contain bug and you are warned about it at the start. So read what works and what doesn't below.
Release notes :
Initial CM 13 release based on latest google release tag r26
Some basic regular CyanogenMod features. ( Includes theme engine )
What works ?
Wifi
Bluetooth
All functionality of RIL ( except data connection which seems to be broken )
Camera ( For video recording go to camera setting->resolution&quality->Video->back camera video and choose either HD1080p or HD 720p)
All other basic functionalities ( Basic apps seem to be working )
Titanium backup works fine
You say more !
Broken stuff :
Data connection seems to be broken ( has to be checked )
Flashing procedure :
General steps ( Wipe cache/data and wipe dalvik )
Flash ROM zip and then sd card fix
For how to flash sd card fix refer below
Flashing procedure for SD fix :
* Download the patch ( boot_sdfix.img )
* reboot to twrp and press Install
* Now choose "Images" button which is in the bottom right corner
* Now choose boot_sdfix.img and in the next window it will ask boot or recovery ? Choose boot and swipe to install
* Reboot and have fun
Downloads :
CM13 initial release for Yu yureka
XDA:DevDB Information
CyanogenMod 13, ROM for the YU Yureka
Contributors
Santhosh M
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 1.0
Beta Release Date: 2015-11-07
Created 2015-11-08
Last Updated 2015-11-08
Click to expand...
Click to collapse
If you can some how try to help us enable data and create a APN that would be awesome
Great Job Bro ???
Sent from my AO5510 using Tapatalk

cm 13 yu yureka supports uhd 4k video recording ?

baratheon16 said:
cm 13 yu yureka supports uhd 4k video recording ?
Click to expand...
Click to collapse
I suppose no
It also depends on the hardware part of the phone
Sent from my AO5510 using Tapatalk

can i revert back to lollipop after install it

adamnp2000 said:
can i revert back to lollipop after install it
Click to expand...
Click to collapse
Take a Backup of the system
Sent from my AO5510 using Tapatalk

baratheon16 said:
cm 13 yu yureka supports uhd 4k video recording ?
Click to expand...
Click to collapse
It was never supported for CM12 so I don't think it ever will for CM13. I wouldn't rule it out 100% though, I believe the SOC is capable of it but it may not be the best experience.

stephendt0 said:
It was never supported for CM12 so I don't think it ever will for CM13. I wouldn't rule it out 100% though, I believe the SOC is capable of it but it may not be the best experience.
Click to expand...
Click to collapse
@stephendt0
I've asked this question because on youtube i saw one video which showed yu yureka cm13 camera showing 4k video recording feature.
See Screenshot

is battery and mobile data working ?

what about downgrading after installation

SyncMasterS19B150 said:
If you can some how try to help us enable data and create a APN that would be awesome
Great Job Bro ???
Sent from my AO5510 using Tapatalk
Click to expand...
Click to collapse
Creating APN is not so difficult u can make a new APN anytime from.checking the settings from.internet
My question is can't we use the fix for miui data connection in cm 13 or modifi it???
Hit thanks if I gave you all an idea

#akadroid said:
Creating APN is not so difficult u can make a new APN anytime from.checking the settings from.internet
My question is can't we use the fix for miui data connection in cm 13 or modifi it???
Hit thanks if I gave you all an idea
Click to expand...
Click to collapse
mind trying it??
Thanks in advance

thanks
Great work. Thanks :good:

Sailfish OS 3.0 for Redmi Note 3

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER:​
Code:
*****Neither me or anyone at XDA are responsible for any damage to your device, corrupted SD cards, RIL malfunction, nuclear fission, exploding cats or anything like that******
Hello everyone after a lot of frustration, help of the awesome people at #sailfish-porters ( mal you are awesome),I bring to you SFOS on kenzo
General Stuff​Sailfish OS is a GNU/Linux, semi-Open Source based mobile operating system built from the legacy that Nokia left on previous OS
It has a quite good gesture based UX, ease of use and It has the potential to become a good alternative to android really recommend it for people that want to break away from google
Something quite important for some people: it doesn't have native android apps support, bringing anbox isn't a priority, sorry.
What's tested and working :
RIL(Full voice/sms and data)
Sensors
LED
Web browser
WiFI
BT
GPS
MTP
Media playback
Camera
Not working:
Hardware keys(Sailfish doesn't need them)
Fingerprint
FM-Radio
Unknown Status:
You tell me
Starting from 12/01/2019:
All builds are gonna have a suffix "-KOMI " and the build version for example "KOMI6", every other build before 12/01/19 will be deleted
Installation:
1. Make sure you have unlocked bootloader and TWRP installed. (Use a non treble TWRP)
2. Wipe Dalvik, System, Data, Internal Storage, Cache
3. Flash LineageOS 14.1
4. Unmount Data
5. Flash sailfish zip
6. Reboot
Downloads:
Code:
[SIZE="3"]Grab any LOS 14.1 build:
[URL="https://download.lineageos.org/kenzo"][STRIKE]https://download.lineageos.org/kenzo[/STRIKE][/URL] No longer a thing
Mirrored to Gdrive:
[URL="https://drive.google.com/open?id=1Cmhg9ykhLiWUi6krH17XXJmmBu6Lhr5K"]https://drive.google.com/open?id=1Cmhg9ykhLiWUi6krH17XXJmmBu6Lhr5K[/URL]
Sailfish:
From Mega.nz: [URL="https://mega.nz/#!jt9mzagD!XcGcGvAYsCNJVgdDXq61QawYeMEVWnxZjUyl0Ivs2E4"]https://mega.nz/#!jt9mzagD!XcGcGvAYsCNJVgdDXq61QawYeMEVWnxZjUyl0Ivs2E4[/URL]
From Gdrive:
[URL="https://drive.google.com/uc?id=1qzIAemSLW4Ae8ymY4XFsxsMsM4k7GqmA&export=download"]https://drive.google.com/uc?id=1qzIAemSLW4Ae8ymY4XFsxsMsM4k7GqmA&export=download[/URL]
[/SIZE]
Credits:
Akhil Kalwakurthy for creating the repos and fixing almost everything, without you this wouldn't be possible, Everyone at #sailfish-porters, uchihaitachii2 and Bartek from our telegram group for testing and being awesome
Source:
Kernel: https://github.com/sailfishos-kenzo/escrima_kernel_xiaomi_msm8956
Everything else: https://github.com/sailfishos-kenzo
XDA:DevDB Information
Sailfish Redmi Note 3, ROM for the Xiaomi Redmi Note 3
Contributors
BusterBg_18
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Version Information
Status: Testing
Current Beta Version: 0.0.0.6
Beta Release Date: 2018-06-30
Created 2018-06-17
Last Updated 2018-06-30

Extras
Skipping the tutorial.
Wouldn't suggest it if its your first time using Sailfish
If you have used it in the past:
You can skip that by tapping on the each corner of the screen clockwise, while starting from left-top corner.
Screenshots:
Not the best place to host images but It works so I don't see a problem
Also Updated to 3.0
https://imgur.com/a/bzyxUgW
Feedback/Beta testing:
You are free to message me on Twitter or Telegram if you want to try builds before anyone else, initial builds are going to be close to each other, once its more polished there wont be need for beta testers

Wow will absolutely later I give feedback

I see latest version from June 6
Question:
Why not Oreo?
Why to stick in Marshmallow?
What is the reason behind

thanks for this awsome rom will try now

will wait some other time if audio and camera is fix

Volte work?

Anyone who has kenzo as secondary phone plz test it. My kenzo is primary phone but i really wanna test but can't ?

Not working:
Video playback
Web browser
Bluetooth
Camera
Audio
Hardware keys(Sailfish doesn't need them)
Fingerprint
Flash
If these are not working then why this os?

iamnived said:
Not working:
Video playback
Web browser
Bluetooth
Camera
Audio
Hardware keys(Sailfish doesn't need them)
Fingerprint
Flash
If these are not working then why this os?
Click to expand...
Click to collapse
It's just a testing version. Dev try to fix this things.
Azizbagwan said:
Volte work?
Click to expand...
Click to collapse
No. Maybe in SF 3.0

BusterBg_18 said:
I ask of anyone that goes and try my build to try everything they want and tell me what fails, I would really like to have feedback before I start to debug more stuff
Click to expand...
Click to collapse
Any chance of getting android emulation in future builds

I've tried previous builds, faced problem with getting Android Development option in setting and due to lack of terminal knowledge couldn't install android apps (Whatsapp, Telegram), since it is ported build and very little community never found solutions to my problems, left it behind, would love to test this new build, i hope dev fixes cam and audio bugs looking forward to test it!
Thanks~tobie

Its really a great stuff dev...will really keep an eye on this, Kenzo is my primary phone....hence cant test..good luck dev....

Crayvolt said:
I see latest version from June 6
Question:
Why not Oreo?
Why to stick in Marshmallow?
What is the reason behind
Click to expand...
Click to collapse
The Oreo branch of hybris was just released and it isn`t quite as used as mm and n, And I used that zip as a temp solution, later i'm going to make a more modern cm13 zip

I see thank you for response..
Will try if possible the audio and camera will work..
and will keep eye on your dev..
thank you for your great support..

Ok just keep security patch updated
and the rest bug will follow to be fixed
I wished I could help build but I dont have enough internet data to spare .
Worst net access here 5GB limited cap per day

Hi everyone, I have rebased the port to the latest official Lineage base The bugs are the same plus maybe a few more; I haven't tested the latest build a whole lot, If you wanna play around with it a little bit I asked you to give me feedback
The flash procedure is the same just change the cm13 zip for the latest Lineage
https://drive.google.com/open?id=1CgTA19VKI0ncgBA9NWd4KlWa5x_XPWdB

+ thumbs up bro.
Nice goood good already tried as what the bug stated
Im listening always

BusterBg_18 said:
DISCLAIMER:​
Code:
*****Neither me or anyone at XDA are responsible for any damage to your device, sdcard, or anything like that******
Hello everyone after a lot of frustration and time I have finally builded a new update of Sailfish OS based on 7.1 however its an extremely alpha build and expect bugs across the board.
General Stuff​Sailfish OS is a GNU/Linux based mobile operating system, it a quite good gesture based interface and something quite important for some people: it doesn't have native android apps support so please dont ask
What's tested and working :
Boots
Data
SMS
Native web browser
Sensors
LED
Not working:
Wi-Fi
Bluetooth
Camera
Audio
Hardware keys(Sailfish doesn't need them)
Fingerprint
Flash
Not Tested:
SD-Card
Calls
2nd sim slot
Video playback
Installation:
1. Make sure you have unlocked bootloader and TWRP installed. (Compatible with any TWRP)
2. Wipe Dalvik, System, Data, Internal Storage, Cache
3. flash LineageOS 14.1
4. Format Data
5. flash sailfish zip
6. reboot
Downloads:
Code:
LineageOS 14.1:
https://download.lineageos.org/kenzo
Sailfish:
https://drive.google.com/open?id=1P1qiXw3iB7F1qYdl3oqPX7_j7H_FlrLU
XDA:DevDB Information
Sailfish Redmi Note 3, ROM for the Xiaomi Redmi Note 3
Contributors
BusterBg_18
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Version Information
Status: Testing
Current Beta Version: 0.0.0.2
Beta Release Date: 2018-06-16
Created 2018-06-17
Last Updated 2018-06-18
Click to expand...
Click to collapse
we expect to have a stable, successful rom day. thanks for your support

It is very nice to see that we have a good chance to have a stable Salfish OS ROM. Is it based on previous version that was abandoned? https://forum.xda-developers.com/redmi-note-3/development/rom-sailfish-os-2-0-5-6-kenzo-t3571258
If you did this from scratch I think looking into that will help you to fix some bugs quickly.

[ROM][8.1][Android Open Kang Project For Huawei P8 Lite][Update 23/07/2018]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome to Android Open Kang Project!​ROM Version: 8.0
Device: Alice
Maintainer: XTutorials
Build Status: UNOFFICIAL​
Disclaimer:
Code:
* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
What is AOKP?​AOKP stands for Android Open Kang Project. It is a custom ROM distribution for several high-end Android devices. The name is a play on the word kang and AOSP (Android Open Source Project). The name was sort of a joke, but it just stuck, just like our infatuation with unicorns.
We fork the source code of Android that Google puts out in the open with every major version release, and we then add the magical unicorn bytes (read: we add some of the coolest features that are both useful and make your ROM awesome).
With AOKP, you can generally do a lot more with your device than what you could do with the original firmware that came installed on it.​
What's Working:​ -Touchscreen
-MTP
-ADB
-External-SD with exFAT support
-Dual SIM Support
-Wi-Fi
-GPS
-Screen Recorder
-Audio
-Video Playback
-Deep Sleep - UNTESTED!​
What's working PARTIALLY:
-Disable Wi-Fi/Bluetooth scanning On Settings->Location to fix : deep-sleep issue!
-Enable Look screen "On Call Proximity" to prevent accidental touch during calls!
-Use Footej Camera to record video up to 1080p!
-YouTube 720p60fps works in ~20fps-- but it might work with some third-party YouTube apps or use YouTube in Web Browser
-RIL may stop working after a reboot
-There might be other minor issues​
What's not Working:​ -Encryption
-Bluetooth
-NFC
-Sensors
-Off-mode charging
-Single SIM support
-VoLTE ​
Installation:​ -It is mandatory to update your device to EMUI 4.1 B895/B896! (otherwise RIL won't work correctly)
-Copy ROM and Gapps to your SD-Card
-Reboot to TWRP 3.1.0-0
-Make factory reset (or clean wipe, more recomended)
-Flash B895/B896 Update if not installed already! (if yes, skip this step!)
-Restore your recovery(TWRP) because installing B895/B896 update overwrites it and if you don't make this step you'll be stuck with stock recovery until you'll flash it again.
-Make a factory reset wipe
-Flash ROM and Gapps
-Reboot and enjoy!​
Downloads:​OpenGapps​aokp_alice_oreo__2018-07-23​
Credits:​-KirinMix Team (me, @AymenDe7, @warrenlobo)
-OpenKirin Team (@surdu_petru , @XePeleato , @OldDroid)
-dotOS Team​
Source Code:​
Blobs: https://github.com/KirinMixTeam/android_device_huawei_hi6210sft/tree/AOKP-8
Kernel: https://github.com/OpenKirin/android_kernel_huawei_hi6210sft/tree/oreo
Vendor: https://github.com/OpenKirin/android_vendor_huawei_alice/tree/8.1​
REPORTING BUGS/PROBLEMS!​As soon as the problem occurs, feel free to tell me or, if possible, send me a logcat and I'll see what I can do!​
Regards,​
XDA:DevDB Information
Android Open Kang Project, ROM for the Huawei P8lite/P8 Lite
Contributors
XTutorials
Source Code: https://github.com/AOKP
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
ROM Firmware Required: EMUI 4.1
Based On: AOKP
Version Information
Status: Beta
Created 2018-07-20
Last Updated 2018-07-22

Reserved
Screenshots:
Note: these are not screenshots from the actual device.

Stock EMUI 4.1 B895/B896
Downloads:
b895_update md5 : 0868fab65e2a38bff95408c02ffa0aba
B896_update md5 : 2b3d6b4b0945592ce506d44874f00d73
Required for ROM installation!

Reserved
Frequently Asked Questions (F.A.Q)
1:
Q.Is this ROM stable enough to be my daily driver?
A.As I don't own a P8 Lite anymore and I can't test it, I can't respond to this question. But the public can!
2:
Q.Will this ROM get official updates?
A.In this moment, no. If OpenKirin or our team can fix some more bugs on the Oreo device tree, maybe I will.
3:
Q.How is battery life?
A.As I said, I don't own the device anymore, so public reviews will tell.
4:
Q.What is logcat?
A.It is a tool what reads the system while running and I can fix problems easier if I see exactly what causes the problem. You will need adb tools installed or linux or adb shell on windows and usb debugging enabled in Settings-Developer Options. If you cannot get a logcat, just tell me the problem. I'll still try to fix it.

Install
The install fail, doesn't work

I guess that you still need a device to test before to release any custom ROM Android 8.0/8.1, or at least a few testers to check your ROM previously
It's not enough to build without issues the whole source code - because the resulting ROM may refused to boot for different reasons !

surdu_petru said:
I guess that you still need a device to test before to release any custom ROM Android 8.0/8.1, or at least a few testers to check your ROM previously
It's not enough to build without issues the whole source code - because the resulting ROM may refused to boot for different reasons !
Click to expand...
Click to collapse
I know, but nobody did respond to my request. I'll try to find one a.s.a.p. Many requested to release dot 8.1 but nobody did offer to test it before releasing. I'm not releasing any other ROM without testing fron now.
Anyway, I'm not allowing these 2 ROMs to be unbootable. I might've found a temporary "fix".
Regards,

Update 22/07/2018!
Update 22/07/2018!
Changelog:
-Finnaly made it to boot successfully
Download:​aokp_alice_oreo__2018-07-22​
Note: The only thing I did to this update is to use OpenKirin's RROS 6 boot.img. This way it boots with no problem. I really hope OpenKirin doesn't mind doing that, but if they do I'll probably remove this update. I could've fixed the boot problem the "hard" way, but since oreo for this device is just in experimental-phase I won't waste more time(and money, since I'm using Google Cloud Platform) on fixing this problem.​
Credits:
ROM Tester & Photos: @victoriordachi​
Regards,​
Photos of device running the ROM:

XTutorials said:
Note: The only thing I did to this update is to use OpenKirin's RROS 6 boot.img. This way it boots with no problem. I really hope OpenKirin doesn't mind doing that, but if they do I'll probably remove this update. I could've fixed the boot problem the "hard" way, but since oreo for this device is just in experimental-phase I won't waste more time(and money, since I'm using Google Cloud Platform) on fixing this problem.​
Click to expand...
Click to collapse
You are welcome to use whatever you want from my ROM's or source code

surdu_petru said:
You are welcome to use whatever you want from my ROM's or source code
Click to expand...
Click to collapse
Damn surdu, you're so nice
---------- Post added at 02:29 PM ---------- Previous post was at 02:28 PM ----------
XTutorials said:
Update 22/07/2018!
Changelog:
-Finnaly made it to boot successfully
Download:
aokp_alice_oreo__2018-07-22
Note: The only thing I did to this update is to use OpenKirin's RROS 6 boot.img. This way it boots with no problem. I really hope OpenKirin doesn't mind doing that, but if they do I'll probably remove this update. I could've fixed the boot problem the "hard" way, but since oreo for this device is just in experimental-phase I won't waste more time(and money, since I'm using Google Cloud Platform) on fixing this problem.
Credits:
ROM Tester & Photos: @victoriordachi
Regards,
Photos of device running the ROM:
Click to expand...
Click to collapse
"And money, since I'm using Google cloud platform"
Relatable LMAO, i left my server on all night and when I woke up cosmic had failed building I was so pissed lol

Cannot flash it. Shows error 7.

ekobaltika said:
Cannot flash it. Shows error 7.
Click to expand...
Click to collapse
Delete assert line in updater-script

Update 23/07/2018!
Update 23/07/2018!
Changelog:
-Fixed flash bug, now it will flash and boot 100%
Download:
aokp_alice_oreo__2018-07-23​
Regards,​

I can report that it boots without problems but after a while it stops working ever after a reboot
PD: and my sim only works on the second slot
PD2: I started over but with b896 (in the previous attemp I used b895) the SIM was detected on first slot, 4g works,gps works, voice works without distorsion... BUT I restarted the phone to install Magisk and I lost my SIM , I mean, the phone didn't detect it.
Before the reboot I install some apps and it was fast.
I hope you can fix the issue with the sim

Tested on single sim. Functions as expected, lost RIL on reboot. excited for future updates

guys already have three firmware and the problem is one, after a reboot, the sim is lost

I'm wonder why NFC doesn't work for you, while was working on my aosp 8 tho?

It is a pity that this rom is very beautiful, but after a while the screen is black and stop working, do you have any solution?

Photooo
What about taking photos in stock app?

rafal381999 said:
What about taking photos in stock app?
Click to expand...
Click to collapse
Doesn't work

[ROM][PORT][10.0.0] OPPO RealmeUI 1.0 [05.03.20][EOL]

RealmeUI 1.0 for OnePlus 6T!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Another ROM maintained by Jay's Dev Team. This thread will be maintained by MounirHero!
Features:
Stock RealmeUI 1.0 / Realme 3 Pro Firmware
Debloated
Automated Flasher
Decrypted
Performance tweaks
RealmeUI Features
What works:
Almost everything, check bugs!
What doesn't work / Bugs:
FP / Face Scanner doesn't work (OPPO HALs)
NFC
VoLTE (Don't have SIM card that supports it so might be unfixable)
How to Install:
Make sure You're on any stock Q Firmware
Note: Backup Your nudes before flashing the ROM!
0. Flash OOS 10/H2OS 10/DP3 Q (any stock Q ROM)
1. Reboot to fastboot
2. Unlock bootloader
3. Boot Device
4. Reboot to fastboot
5. Flash TWRP
6. Boot in TWRP
7. Make sure you're on slot A,if you're on B then reboot to fastboot and use
fastboot --set-active=a
Click to expand...
Click to collapse
8. Download and flashEPR for your device model.
9. Reboot to twrp, Format Data, wipe system and boot in fastboot mode.
9. Connect phone to PC.
On PC
0. Unpack RealmeUI Q for OnePlus6T Mar05 by Jay's Dev Team.zip
1. Double Click Clean Flasher .bat (it could take 5-10 minutes to flash)
2. Phone will boot automatically in OPPO Firmware.
3 .Enjoy! Just install MAGISK APK if you want root! you don't need to flash anything.​
Download
Warning! DO NOT flash RealmeUI OTA's! They may brick Your phone! If You end up flashing one anyway, just use EDL mode or fastboot to go back to stock firmware.
If You have any other problems, just ask here on XDA or for the fastest support PM me or ask someone in my group on Telegram
Join my group!
Jay's Dev Team:
Jay - Main Developer - Donate to Jay
MounirHero - OnePlus 6T Maintainer & Tester - Donate to Mounir
Credits:
Mounir for maintaining!
Guzram for support and help!
erfanoabdi for vendor patcher idea.
FunkWizard/OnePlus for latest firmwares!
OnePlus for creating OP6!
My friend Dylan for always supporting me
If I forgot anyone, just PM me on Telegram!
​
XDA:DevDB Information
[ROM][PORT][10.0.0] OPPO RealmeUI 1.0 [05.03.20], ROM for the OnePlus 6T
Contributors
ProtoDeVNan0
Source Code: https://github.com/OnePlusOSS/android_kernel_oneplus_sdm845/tree/oneplus/SDM845_Q_10.0_Beta
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: Latest Open Beta
Based On: RealmeUI
Version Information
Status: Stable
Current Stable Version: 1.0
Created 2020-03-06
Last Updated 2020-05-24

RESERVED

Oh wao GREAT !!!
Thanks Developer:laugh::laugh:

anyone has a issue sms not receiving. how to fix the sms anyone can help me.

This rom looks great!
I Hope the dev still maintaining that!
I'll give a try tomorrow.

tswb said:
anyone has a issue sms not receiving. how to fix the sms anyone can help me.
Click to expand...
Click to collapse
Yeah i ahve Same ISssue WitH revicing OTP From Sim

I'd love to try this but it exceeds megas 5gb download limit.

great work great rom , thanks. İ am installed rom.Very stable but dont work camera app. i install gcam . gcam working.

shunter58 said:
great work great rom , thanks. İ am installed rom.Very stable but dont work camera app. i install gcam . gcam working.
Click to expand...
Click to collapse
Just want to know if your SMS is working incoming.

tswb said:
Just want to know if your SMS is working incoming.
Click to expand...
Click to collapse
sms incoming is working .

Hi to everyone! I'm gonna to try this rom and then I'll give my feedback.
Anyway I've a question: why it's not possible to flash the zip file through twrp? because in this case i've access with windows OS but usally i've a mac and flash every single rom's components it's not very practical.

nicche said:
Hi to everyone! I'm gonna to try this rom and then I'll give my feedback.
Anyway I've a question: why it's not possible to flash the zip file through twrp? because in this case i've access with windows OS but usally i've a mac and flash every single rom's components it's not very practical.
Click to expand...
Click to collapse
Because you didn't read a word of the thread.

MounirHero said:
Because you didn't read a word of the thread.
Click to expand...
Click to collapse
Hi, MounirHero! first of all I apologize if I made a stupid question....but, i swear, I read the first post (as I always do) however I probably didn't read very carefully... but, you know, everyone can make mistakes...
your reference is to this, isn't it?
Automated Flasher
Click to expand...
Click to collapse
If it is not correct, could you please explain to me?
anyway I tried to flash manually but without success....in the end I find a pc with windows and I used msm tool to restore my oneplus.

Hi everyone,
A feedback after using this ROM for a half a day now. SMS was a problem at the beginning, I had to reset APN settings twice to have it work smoothly.
Camera app never worked. I had to install GCAM and OPCAM, but still main shooting is not working. Video, selfie and pano work fine. The idea of not having fingerprint or face-unlock turns to be annoying. Face-unlock on Oxygen OS was the most used feature ever. So, I'm getting used to the new swipe-to-unlock old days method.
Performance wise, the OS is butter smooth. Very fast. No lags in any aspect.

Rom worked real well except the SMS issue made me change. Really hope that gets fixed

THREAD CLOSED on request of OP @ProtoDeVNan0! OP is no longer going to update this device.

[ROM][12][lavender] Pixel Experience [OFFICIAL][AOSP]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience for Redmi Note 7 [lavender]
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android12
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
FMRadio
Fingerprint reader
Lights
Sound / vibration
Known issueslet us know
DON'T FLASH GAPPS, ALREADY INCLUDED
Download
Translation
Help with project translation
Stay tuned
Our Telegram channel
Our blog
Android OS version: 12
Security patch level: December 2020
Build author/Device Maintainer: ticklemykettle
Device Source code: https://github.com/PixelExperience-Devices
Source code: https://github.com/PixelExperience
ROM Developer: jhenrique09
XDAevDB Information
[ROM][11][lavender] Pixel Experience [OFFICIAL][AOSP], ROM for the Xiaomi Redmi Note 7
Contributors
ticklemykettle
ROM OS Version: Android 12
Version Information
Status: Stable

Been using this ROM from yesterday and i have to admit it's butter smooth. Didn't find any bugs everything works as it should.
Just one note : you could add GCam to next build

Mirror download link please!!

VOLTE isn't working.

Thanks For This Great Rom!! In my case, no problems detected for now..

HI, facebook and messenger crash
Lavender, full clear, fresh rom....

HI, facebook and messenger crash
Lavender, full clear, fresh rom....

kopot said:
HI, facebook and messenger crash
Lavender, full clear, fresh rom....
Click to expand...
Click to collapse
You did something wrong... I use this ROM for 3 days now and everything works perfectly, no crash everything is stable battery life is good also. Try clean flashing again with latest firmware

F4JL0 said:
You did something wrong... I use this ROM for 3 days now and everything works perfectly, no crash everything is stable battery life is good also. Try clean flashing again with latest firmware
Click to expand...
Click to collapse
I have already tried 3 times. I do it like this:
1. Data format / orange fox /
2. Flash miui_LAVENDERGlobal_V12.5.3.0.QFGMIXM_0baf420181_10.0.zip
3. Reboot and waiting for full instal MIUI, cofnigure and do update everyting. Facebook is runing ok
4. Data format / orange fox /
5. Flash PixelExperience
6. Reboot and waiting for full instal PE, cofnigure and do update everyting.
7. Instal facebook - open it and crash
*******
Sorry for the confusion. everything ok. the problem was the sd card

kopot said:
I have already tried 3 times. I do it like this:
1. Data format / orange fox /
2. Flash miui_LAVENDERGlobal_V12.5.3.0.QFGMIXM_0baf420181_10.0.zip
3. Reboot and waiting for full instal MIUI, cofnigure and do update everyting. Facebook is runing ok
4. Data format / orange fox /
5. Flash PixelExperience
6. Reboot and waiting for full instal PE, cofnigure and do update everyting.
7. Instal facebook - open it and crash
*******
Sorry for the confusion. everything ok. the problem was the sd card
Click to expand...
Click to collapse
"3. Reboot and waiting for full instal MIUI, cofnigure and do update everyting. Facebook is runing ok" Wrong way in the furure.. Install miui rom, but only install, no boot into it, don't configure or install nothing..
And add a 6.1..
6.1. -> Format data again and Wipe cache..

Thank you for making PE is life once again for RN7.

this rom kernel is based on EAS or HMP?

Hi, I'm new. May i ask is there call recording include on newest Evolution rom? Thank you a lot for your help

Can you put unlimited og quality on google photos? Like the Pe11 used to have great rom btw

How about hotspot, is it working as well? No fc? Thanks!

marlonhms said:
this rom kernel is based on EAS or HMP?
Click to expand...
Click to collapse
It's EAS.. (Predator Storm Breaker) but it doesn't matter if you would rather have HMP you can flash it

johngare said:
How about hotspot, is it working as well? No fc? Thanks!
Click to expand...
Click to collapse
HotSpot is working well. It's stable build everything works as it should

I'm missing the tool, "prevent the device from unlocking the pocket" when the phone is in the pocket next to the skin, it activates the buttons, next music play pause etc... and the screen turns on many times due to the lack of avoiding wake up.

F4JL0 said:
HotSpot is working well. It's stable build everything works as it should
Click to expand...
Click to collapse
Great, thanks!

Hey guys,
Nice rom but my screen turns black and unusable when I connect the headphone
(wiped and flashed it more than once, the problem still persists)
Edit: solved after clearing cache of Google app