Thousands of android users having this problem, when you install custom ROM and then you try to reset your phone; it keep rebooting into TWRP recovery (not system), even after you flash your ROM again.
So here's the solution: https://www.youtube.com/watch?v=vSWC5MAB5cE
Thread closed. Link is dead.
Related
Hello out there,
my problem is a bit annoying. Everything is fine if I use my OP3T with Oxygen (4.0.3) and TWRP (3.0.3-1). But I want to use LineageOS with TWRP and cant, because my TWRP isnt working after flashing lineage.
"Normal"-Setup:
- TWRP 3.0.3-1
- Oxygen 4.0.2 or 4.0.3 (doesn't matter)
- supersu 2.79
- Encrypted Device
"Lineage"-Setup:
- TWRP 3.0.3-1
- lineageOS (lineage-14.1-20170214-nightly-oneplus3-signed.zip OR lineage-14.1-20170208-nightly-oneplus3-signed.zip - tried both, doesnt matter)
- supersu 2.79
- openGApps for 7.1 nano
- Encrypted Device
My Problem is, that I can boot up lineage and use it, but if I reboot into my TWRP to flash something or make some Backups, it asks for my encryption-passphrase, it says it is okay and boots into the twrp main-windows. After that I can't touch anything (stuck in mainmenu) and after a few seconds it results into a black screen (plus white LED) and I am forced to reboot the device. After that reboot I have to reconfigure lineage (seems to loose data).
Does anyone have an idea how to fix this annoying "bug"?
Thank you very much!
Atomique
EDIT: I found that Thread after searching for a issue like that in the lineageOS official Thread - I will try this and report! - Thank you! https://forum.xda-developers.com/on.../recovery-official-twrp-oneplus-3-3t-t3543391
I had the exact same problem when I hab LineageOS installed! It would always lose all its data. After flashing and reflashing a hundred times, I ended up reverting my OP3T back to stock using a OnePlus forum guide (I'm a new user, so I can't post the link). I am now back to OOS 4.0.3 but can't even get SuperSU to work. Whenever I flash it (with or without the dm-verity fix) the phone is stuck booting forever.
I found the post you linked to aswell but haven't tried flashing LineageOS using the new TWRP. But I can tell that the new version doesn't help rooting OOS...
Did you have any luck flashing LineageOS by now?
Edit: With the newest Lineage Version I always get an error when trying to flash it. Do you have the same problem? The nightly from two weeks ago seems to work better.
Use latest TWRP 3.0.4.1
nitinvaid said:
Use latest TWRP 3.0.4.1
Click to expand...
Click to collapse
That's what I'm doing... Could the dm-verity be a problem? There are two versions, one with opt and one with force in the name.
Thank you for your replies! The link (TWRP 3.0.4-1) worked like a charme!
@Tafelbomber: I would recommend you to start from scratch. But please be warned: you will loose your data! Make a backup first!
1. Delete everything with fastboot -w
2. Flash the recovery noted in my first post with fastboot flash recovery <twrp-filename.img>
3. Optional: Restart into the TWRP and flash the OOS 4.0.3 to make sure that you have a clean OS installed befor flashing lineage
4. Flash lineage OS + additional ZIPs (like supersu, betterbatterystats, Gapps etc)
5. Clean Dalvik and Cache!
6. Reboot and have fun. --> Sometimes you get problems with the encryption chain (Red Error --> in my case the fastboot -w did it for me)
Good luck - I will close this thread - thanks again for your help!
Atomique
EDIT: I want to close this thread, but I don't know how.
Why is it that when I flash TWRP following the steps provided on the official website my Redmi 4X gets stuck on the logo when powered on? At this point the only thing I can do is access TWRP and even then I am asked for a password. I also performed a factory reset from TWRP and even though I can use TWRP just fine the stock ROM still doesn't boot.
So, what do I have to do in order to have a proper working recovery with MIUI installed? I read something about boot verification but didn't really understand it ?
First off install lazyflasher.zip then format (not factory data reset) data from TWRP.
Good to go!
use redwolf recovery
Hello,
I tried to flash some stock 9.0.0 firmware on my P20 pro and now I have some weird bootloop.
When I boot up my device I get a flash for a second full of random colors and then the device starts to boot up.
Devices boots up normally but after one minute of using the device it gets in to reboot.
I have my backup from 8.1.0.0 via TWRP but now my TWRP encrypts all data, I tried several TWRP and on every TWRP data are encrypted.
My question guys:
Can I flash ROM from fastboot because this is the only thing that I can do?
I have even tried to go to eRecovery (i managed to flash stock recovery) and when I want to download stock ROM from recovery it says that I have no packages available for download.
Hi Guys
I tried an update to Mirza's ROM but after it caused more issues, I tried restoring from full Orangefox backup in recovery; only to find the phone stuck at Fastboot mode. It appeared strange, so I tried it again to end up with same fate. I tried installing Xiaomi.EU ROM, but after installation it got into a boot loop alternating between Recovery logo and MIUI startup logo. I got into fastboot again and flashed TWRP trying the same, but without joy. Tried another recovery and multiple versions of Xioami.EU ROM all with same fate. Finally got hold of an old fastboot ROM from Xioami.EU and flashed with MiFlash tool and it flashed successfully without issues. Assuming all was well, I tried flashing ROM via recovery which either gets stuck at MIUI logo or recovery. Boot loader in unlocked and decrypted. I tried flashing SHRP recovery, Magisk, wiping data etc as well to rule out any issues, but the problems remain.
Any ideas as to what's happening?
If I understood right, recovery ofox is working.
So reboot to it
Format data with yes
Reboot ofox
Flash ROM
Flash magisk recommend
Format data again with yes
Reboot system and give time to boot, could be more than some minutes but I think not more than 20
For those who might face similar issues.
According to Orangefox website, 'note that you should not restore a backup of the persist image, unless it proves absolutely necessary'. I may have checked it in recovery during restoration which probably destroyed the partition.
Fix:Installed TWRP via flashboot, formatted all data(not wiped) and installed ROM then formatted again and it booted.
My phone name and model is redmi 9c (angelica) variant..i will get straight to the point..i installed an updated version of my from 12.0.22 to 12.5.4.0 through orange fox recovery...i flashed the recovery by dirty flashing where i just cleared cache and delvik ART or something...then just flashed the whole update zip file through recovery.. everything was working and no problem then i just thought that i would open the custom recovery and it will not open and will kept itself stuck in recovery image or start image of the recovery not open or closing.. nothing worked until i thought i should just factory reset my phone but it won't factory reset itself and will get stuck on that same custom recovery logo and i had manually force it open like i did by press and holding the power button until it vibrated..it opened like normal shut down or restart...so i my phone couldn't be formatted so what i did was to download the fastboot version of my phone that i had installed and took the recovery.img file and flashed it through another phone through bugjaeger app..since i don't have a pc that all i could do and it worked the stock recovery came back and i can wipe my data if i want....but if i installed the custom recovery.img once again it won't work and will get stuck like that time so i want a solution where i can get custom recovery back again...and i gave my full story because someone might be in a similar position as me and by doing something that i did might just help them and also i want a solution to get my custom recovery back plz someone help me.....
you should know that there is a version of Pbrp Vendor R (Miui 12.5), it is the one that works but has encryption, it is unfortunate but if you have MicroSD you will have no problem installing magisk
wulan17 Custom Recovery
My Android Custom Recovery Builds
www.pling.com