Boot into Android... This is what I've done..
* OEM unlocked bootloader
* Booted into Android
* Many times I have moved SuperSU (various versions, I now have 2.79 the latest off of chainfires site) from PC to phone while in Android
* Moved the no verity opt encrypt 5.0 from PC to phone
* Boot to fastboot, and have flashed the latest TWRP 3.0.4.1 from jcadduono, have also tried with latest Blu spark TWRP 3.1.0.x. I've been able to boot into recovery the first time in order to swipe right to modify, find my SuperSU files, no verity files, flash them in TWRP, then reboot system..
I don't know what I'm missing however I have not been able to boot into Android . I've waited over 20 minutes each time with no success..
What am I missing? My head hurts, as I've done this waaay too many times than I'd like to admit..
Thanks in advance to all
Flash supersu files only
It already has no verity files
If you dont want root then you should flash no verity zip and for root just flash supersu
kunal1540 said:
Flash supersu files only
It already has no verity files
If you dont want root then you should flash no verity zip and for root just flash supersu
Click to expand...
Click to collapse
Thanks for this, I will try this!
Edit: it worked, thanks again!
flash TWRP 3.1 and boot into it and just flash 2.79 then reboot to system.
Related
Hey everyone. I just got my new OnePlus 3T a week back. I was loving it till today but I wanted to mess with my phone and I guess I did just that. Long story short, I was on 7.1.1 and unlocked OEM and installed TWRP. Phone booted up and i went into recovery and installed Super SU and the dm verity. After this step, my phone is stuck on the boot animation. I'm able to access TWRP as well as Fastoot ADB. I want to sideload the stock OxygenOS ROM into my phone through ADB, but i'm unsure which file to flash and the exact process. Could someone please help me out? :crying:
That's why you always make a nandroid back up
I figured out why the adb sideload wasn't working. I tried to do the sideload directly from the ADB cmd while my phone was in fastboot mode. So, I tried an alternate method by going into TWRP and doing the sideloading from the advanced menu. It worked and I'm setting up my OP 3T now Guess I jumped the gun by posting here without thinking.
On a side note, my device doesn't have root access now. Maybe it never got installed properly before getting bricked. I think it had to with the fact that I had updated to 7.1.1 by using a VPN. I'm pretty good at following instructions so i couldn't have gone wrong. Can anyone tell me if i can go ahead and root my device now that I'm back on stock OS?
You dont flash supersu and dm verity files at the same time
No wonder you end up in bootloop
Multiple threads are already there about the same issue.
For root just flash supersu
kunal1540 said:
You dont flash supersu and dm verity files at the same time
No wonder you end up in bootloop
Multiple threads are already there about the same issue.
For root just flash supersu
Click to expand...
Click to collapse
Damn, I didn't know that. I only searched for the bootloop issue and didn't really find something that seemed simple enough for me. Almost all the guides I read had similar instructions so I flashed the Dm-verity first and then the Super SU immediately after that. What does dm verity do if it doesnt need to be flashed? And just so that I'm clear - flashing Super SU is enough and no need to bother with the dm verity?
Rahulsingh9367 said:
Damn, I didn't know that. I only searched for the bootloop issue and didn't really find something that seemed simple enough for me. Almost all the guides I read had similar instructions so I flashed the Dm-verity first and then the Super SU immediately after that. What does dm verity do if it doesnt need to be flashed? And just so that I'm clear - flashing Super SU is enough and no need to bother with the dm verity?
Click to expand...
Click to collapse
There's a much much simpler solution, you just use magisk. There's no need to flash supersu or dm-verity fix, just flash the latest magisk zip file in TWRP -> reboot -> install Magisk manager from playstore and you have perfectly working rooted phone.
fluster84 said:
There's a much much simpler solution, you just use magisk. There's no need to flash supersu or dm-verity fix, just flash the latest magisk zip file in TWRP -> reboot -> install Magisk manager from playstore and you have perfectly working rooted phone.
Click to expand...
Click to collapse
Tried flashing the Magisk v9 zip and checked the option that goes something like "verify after flashing" and it failed. Should I uncheck both those options before flashing or flash the phh super user zip too?
Azar_98 said:
Try the latest version of magisk, v11.6.
http://tiny.cc/latestmagisk
Click to expand...
Click to collapse
Worked perfectly and no hassle at all. Thank you so much!
Rahulsingh9367 said:
Tried flashing the Magisk v9 zip and checked the option that goes something like "verify after flashing" and it failed. Should I uncheck both those options before flashing or flash the phh super user zip too?
Click to expand...
Click to collapse
Always flash the latest magisk, and you don't need to flash phh or anything else. Magisk now comes with magisksu that works great with OOS 4.1.1.
Check the link below for latest magisk
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless
If you don't mind losing your data, you can try this 100% clean but slightly painful install. It might be overkill for most but you can start from a clean slate. Backup your stuff to the PC before you do this.
1. Flash compatible stock recovery (stock recovery for android N) in fastboot
2. Now choose to wipe everything (even music, photos) from stock recovery. You will lose everything on your phone.
3. Sideload OOS 4.1.1 rom
4. Reboot and complete phone setup
You are now completely stock except with a unlocked bootloader. In order to gain root, continue further -
5. Enable developer options in Settings and then enable Advanced Reboot and USB debugging
6. Reboot to fastboot and flash twrp 3.0.4.-1
7. Reboot to twrp and flash Magisk v11. 1 zip
8. Reboot and install Magisk Manager from playstore.
Congratulations, you have a stock 4.1.1 with working root and it will even pass safety net check (enable magisk hide in magisk manager)
I am having serious battery drain on any OOS 4.x.x rom. I used to have very good battery life in 3.5.2. can anyone give me a proper step by step guide to downgrade? Battery is a huge issue for me.
i have my own steps that i found it by my self but it will earse all ur data so backup ur data to pc.
here are the steps :
1. make sure u have unlocked bootloader, custom recovery (twrp) i prefer use blu_spark twrp latest version
2. pur ur 3.5.x firmware in internal storage
3. boot to twrp recovery and do a clean wipe(dalvik, data, internal, system, cache)
4. flash ur 3.5.x firmware. it will take a long time just wait it
5. reboot to system, ull get a no os installed warning in twrp just reboot it(swipe)
6. when the devices boot up ull get a enter password for decrypt data. just reboot to bootloader
7. when u in fastboot mode connect ur devices to pc
8. use op3/op3t toolkit to flash twrp from fastboot u can find the toolkit here: https://forum.xda-developers.com/oneplus-3t/development/toolkit-oneplus-3t-toolkit-unlock-t3507729
9. then wait when it boot to twrp and when it boot up wipe data, internal storage only
10. reboot to system. done
sorry for my bad english. i hope it works
Ok that sounds easy. Reboot to recovery after flashing ROM retains the recovery I guess. Do you have any suggestion of custom kernel for 3.5.x ? Also i have the latest twrp. Will is allow me to flash 3.5?
arafat_mw said:
Ok that sounds easy. Reboot to recovery after flashing ROM retains the recovery I guess. Do you have any suggestion of custom kernel for 3.5.x ? Also i have the latest twrp. Will is allow me to flash 3.5?
Click to expand...
Click to collapse
u can try this i guess https://forum.xda-developers.com/on...mm-6-0-1-oxygen-3-5-4-kernel-3-18-48-t3567781
Thank you guys. It wasn't really tough. Flashed OOS 3.5.4 full zip. Rebooted to recovery then rebooted to system. However it was bootloop at the start then I restarted and flashed SuperSU zip, it booted up. Don't know why SuperSU is required to boot up. However I am not getting the support for Magisk. I tried cleaning up SuperSU and then flashing the Magisk zip but it didn't work. Any advice ?
arafat_mw said:
Thank you guys. It wasn't really tough. Flashed OOS 3.5.4 full zip. Rebooted to recovery then rebooted to system. However it was bootloop at the start then I restarted and flashed SuperSU zip, it booted up. Don't know why SuperSU is required to boot up. However I am not getting the support for Magisk. I tried cleaning up SuperSU and then flashing the Magisk zip but it didn't work. Any advice ?
Click to expand...
Click to collapse
You have to reflash stock boot image to get Magisk to work
I was on Oos 4.5.1 and wanted to update to Oreo. I followed the thread on this forum and downloaded the new TWRP BluSpark img file, the OOS full package and the Magisk zip. Booted into recovery, installed the img file and flashed OOS and the Magisk zip file. When i rebooted into system, i noticed Root wasn't installed and my recovery had reverted to stock recovery but my device bootloader was still unlocked. So i booted into fastboot mode, flashed the Blusparks img file and booted into recovery and flashed the magisk file. Now the phone rebooted and its stuck on the "Powered By Android" screen. The boot image of OP hasn't shown up. What do i do? I really don't want to hard reset my phone :/
No need to hard reset the phone, just go to recovery clean flash excluding internal storage then flash oxygen os 5.0 zip file and magisk 14.5.
Magisk 14.0 has boot issues.
I had similar issues which I resolved easily.
You may trigger DM verity flag after booting which you can disable easily.
ersandeepkr said:
No need to hard reset the phone, just go to recovery clean flash excluding internal storage then flash oxygen os 5.0 zip file and magisk 14.5.
Magisk 14.0 has boot issues.
I had similar issues which I resolved easily.
You may trigger DM verity flag after booting which you can disable easily.
Click to expand...
Click to collapse
Oh yes, i figured Magisk 14.0 was the issue. I waited for 30 mins+ and the phone still didnt boot up, so i switched it off and booted into recovery and flashed just the OOS zip file and it worked. I don't want to wipe data as well.
Can i flash Blusparks twrp from adb, boot into recovery and just flash OOS and Magisk 14.5 and wipe dalvik/cache?
Manjumeth-95 said:
Oh yes, i figured Magisk 14.0 was the issue. I waited for 30 mins+ and the phone still didnt boot up, so i switched it off and booted into recovery and flashed just the OOS zip file and it worked. I don't want to wipe data as well.
Can i flash Blusparks twrp from adb, boot into recovery and just flash OOS and Magisk 14.5 and wipe dalvik/cache?
Click to expand...
Click to collapse
You can flash bluspark recovery from fastboot. But for the successful installation and avoid problems, forget the application data. You can fresh install apps which is always recommended while flashing any ROM even if it is updated version. I never dirty flash ROM. I care for internal storage and not for the small apps.
You can try dirty flash as you stated but stability may be an issue.
Dirty flashed with Magisk 14.5 and it worked
So I've used TWRP r16 and it throws an "Image not signed or corrupt" error as suggested by other users I ignored it, but everytime I reboot to system and try to get to recovery "no command" show's up meaning TWRP was replaced by stock recovery all help will be appreciated.
Thanks
Akash731 said:
So I've used TWRP r16 and it throws an "Image not signed or corrupt" error as suggested by other users I ignored it, but everytime I reboot to system and try to get to recovery "no command" show's up meaning TWRP was replaced by stock recovery all help will be appreciated.
Thanks
Click to expand...
Click to collapse
You need to flash Magisk after flashing TWRP
1. Flash Latest TWRP
2. Reboot to TWRP
3. Flash Magisk
If you boot in to system after flashing TWRP, TWRP will be removed
pradeeppk said:
You need to flash Magisk after flashing TWRP
1. Flash Latest TWRP
2. Reboot to TWRP
3. Flash Magisk
If you boot in to system after flashing TWRP, TWRP will be removed
Click to expand...
Click to collapse
Hey thanks that worked.
But everytime I boot to system and boot to twrp the data gets encrypted and I can't access the files do you happen to know any solution for this?
Akash731 said:
Hey thanks that worked.
But everytime I boot to system and boot to twrp the data gets encrypted and I can't access the files do you happen to know any solution for this?
Click to expand...
Click to collapse
If you are on stock Rom, according to my knoweldge it is not possible to remove encryption, if you format your date in twrp for removing encryption then reboot to system you can see that the phone is again encrypted.
But in custom roms this doesnt happen.
pradeeppk said:
You need to flash Magisk after flashing TWRP
1. Flash Latest TWRP
2. Reboot to TWRP
3. Flash Magisk
If you boot in to system after flashing TWRP, TWRP will be removed
Click to expand...
Click to collapse
pradeeppk said:
If you are on stock Rom, according to my knoweldge it is not possible to remove encryption, if you format your date in twrp for removing encryption then reboot to system you can see that the phone is again encrypted.
But in custom roms this doesnt happen.
Click to expand...
Click to collapse
I don't want to try custom rom's as this is my main device guess I'm stuck with the encryption then thanks for your help. :good:
Edit:-
Tried TWRP r20 it decrypts fine thanks
pradeeppk said:
You need to flash Magisk after flashing TWRP
1. Flash Latest TWRP
2. Reboot to TWRP
3. Flash Magisk
If you boot in to system after flashing TWRP, TWRP will be removed
Click to expand...
Click to collapse
You don't have to flash Magisk after flashing TWRP. The two are unrelated.
After flashing TWRP you have to boot into recovery, not system. Once TWRP was started, you can reboot into system. No need for Magisk (unless you want Magisk anyway).
gewe said:
You don't have to flash Magisk after flashing TWRP. The two are unrelated.
After flashing TWRP you have to boot into recovery, not system. Once TWRP was started, you can reboot into system. No need for Magisk (unless you want Magisk anyway).
Click to expand...
Click to collapse
It will not work in stock ROM, if you flash a custom rom there is no need to flash Magisk.
You should flash Magisk or custom kernel after flashing TWRP otherwise it will be erased.
Google about TWRP erasing after reboot you should get too many posts regarding this
This is one of them
https://forum.xda-developers.com/oneplus-3t/help/twrp-deleted-booting-t3769867
pradeeppk said:
It will not work in stock ROM, if you flash a custom rom there is no need to flash Magisk.
You should flash Magisk or custom kernel after flashing TWRP otherwise it will be erased.
Google about TWRP erasing after reboot you should get too many posts regarding this
This is one of them
https://forum.xda-developers.com/oneplus-3t/help/twrp-deleted-booting-t3769867
Click to expand...
Click to collapse
I am using stock ROM, and yes, also Magisk (installed later). IIRC Magisk is not needed for TWRP to work. When I receive the next OTA notification, I will test this.
The thread you are referring to is for a OnePlus 3T. For our device this is the thread: https://forum.xda-developers.com/moto-g5s-plus/development/recovery-twrp-3-1-1-r7-t3694910.
Since there is no official TWRP for the Moto G5S Plus, I took the following text from the TWRP page for the Moto G5S.
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
Click to expand...
Click to collapse
Instead of that you can also use fastboot reboot-bootloader, and then from the bootloader start recovery.
pradeeppk said:
It will not work in stock ROM, if you flash a custom rom there is no need to flash Magisk.
You should flash Magisk or custom kernel after flashing TWRP otherwise it will be erased.
Google about TWRP erasing after reboot you should get too many posts regarding this
This is one of them
https://forum.xda-developers.com/oneplus-3t/help/twrp-deleted-booting-t3769867
Click to expand...
Click to collapse
Two days ago I received a notification for an OTA update, containing the August 2019 security patches.
After going back to stock ROM, installing all the updates up to the latest, I installed TWRP. After booting into recovery, and then into system, and recovery again, TWRP was gone. Strange, I don't remember this happening before. Maybe I always installed Magisk before booting into system.
Bottom line: you were right, I was wrong. Thanks for pointing it out.
gewe said:
Two days ago I received a notification for an OTA update, containing the August 2019 security patches.
After going back to stock ROM, installing all the updates up to the latest, I installed TWRP. After booting into recovery, and then into system, and recovery again, TWRP was gone. Strange, I don't remember this happening before. Maybe I always installed Magisk before booting into system.
Bottom line: you were right, I was wrong. Thanks for pointing it out.
Click to expand...
Click to collapse
As like you said this is the first time in my life i need to flash magisk to stick twrp.
I usualy doesn't use root or custom roms, install twrp, remove unnecessary apps from stock system, replace host files with adaway hosts, replace or edit gps config files. and continue using stock.
This is the main routine from Android 1.5
(Samsung spica (i think it was the first Android phone from Samsung)).
It may be due to security reason stock kernel or system delete twrp.
When installing magisk it patch stock boot image, that may be the reason of twrp remains after flashing magisk.
Hello forum, I have been trying to root my motorola G6..
After much struggle, getting stuck in a boot loop and other issues I finally have restored stock roms and now have build PPS29-118-15-11 installed. So at least the phone works again My bootloader is unlocked.
But I still want to root it.
I think I understand the procedure well enough, but I am unsure of the correct/best versions I need for the ROMS/boot, Magisk, and TWRP.
ROMS/boot:
I found a youtube with instructions for updating Android v9
But I haven't tried it as this recommends a boot img:
OPS27.104-15-10_no-verity_boot.img
OPS27.104-15-10_no-verity_boot.img | by dejello for Moto G6
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
I am reluctant to use the above as it looks to be a downgrade from my current version 29-118-15-11.
Also, I thought that the filename prefix "O" indicated oreo instead of "P" for pie? So would this be a version 8 file?
TWRP:
Similarly, I am not sure if I am using the right, or best TWRP version. I currently have twrp-v3.2.3-ali.img
I flash this (with fastboot) and it works but shortly after I encounter the "no command" error (when booting to recovery) and I have to redo it. I am NOT overwriting it with a stock recovery.img.
I have also run into the "encryption password" problem, where I am unable to provide one to decrypt the data partition. So I can't backup the data with twrp (something I really would like to do).
Magisk
I have Magisk-23-0.zip
But I saw a post from brunogroa that recommends installing Magisk 19 and updating it to 23 later. Is this something that is required or can I just install v23?
So, I am looking for the correct versions for ROM, Magisk and TWRP to use, given that I have installed PPS29-118-15-11
Any assistance will be greatly appreciated.
Well I finally have it I think. I noticed a comment in
[GUIDE][ROOT][Moto G6][ALI] TWRP, Root, and Magisk installation guide. by djello
"(you may not need a modified boot image for Magisk)"
When using PIE instead of OREO.
Being an optimist, I gave it a try and it worked... I installed Magisk and was able to verify root access using the Root Checker Basic App. Kept stock boot img.
This is probably not too amazing for the old hands but us newbies need a break every now and them
So in the end, all I had to do was:
(0) Unlock bootloader
(1) Install stock PPS29-118-15-11
Done earlier with another version of twrp.
Install TWRP 3.5.2
(2) fastboot flash recovery twrp-3.5.2_9-0-ali.img
(3) Use twrp to install Magisk
adb push Magisk-v23-0.zip /tmp
Boot phone into recovery and use twrp to install Magisk
(4) Boot the phone into System and verify Magisk is there and use Root Checker App to confirm I am now rooted.
Issues:
I noticed that a security update for
PPS29-118-15-11-5 failed to apply.
The phone boots into recovery mode and asks for the decrypt password. I don't know the password to decrypt data and how to proceed from here.
I suspect that if I flash the stock recovery img the security update might work. If anyone knows please comment ; I will research this also and maybe just try it.
pdpantages said:
Well I finally have it I think. I noticed a comment in
[GUIDE][ROOT][Moto G6][ALI] TWRP, Root, and Magisk installation guide. by djello
"(you may not need a modified boot image for Magisk)"
When using PIE instead of OREO.
Being an optimist, I gave it a try and it worked... I installed Magisk and was able to verify root access using the Root Checker Basic App. Kept stock boot img.
This is probably not too amazing for the old hands but us newbies need a break every now and them
So in the end, all I had to do was:
(0) Unlock bootloader
(1) Install stock PPS29-118-15-11
Done earlier with another version of twrp.
Install TWRP 3.5.2
(2) fastboot flash recovery twrp-3.5.2_9-0-ali.img
(3) Use twrp to install Magisk
adb push Magisk-v23-0.zip /tmp
Boot phone into recovery and use twrp to install Magisk
(4) Boot the phone into System and verify Magisk is there and use Root Checker App to confirm I am now rooted.
Issues:
I noticed that a security update for
PPS29-118-15-11-5 failed to apply.
The phone boots into recovery mode and asks for the decrypt password. I don't know the password to decrypt data and how to proceed from here.
I suspect that if I flash the stock recovery img the security update might work. If anyone knows please comment ; I will research this also and maybe just try it.
Click to expand...
Click to collapse
I am stuck in a similar position.
SOLVED IT!!! Followed all of the steps that you posted except I installed Magisk with the patch method because I couldn't get the zip file to push onto the device. Kept getting a read only error, maybe because it wasn't rooted?
Anyway, I am rooted now!!!