¿What is this problem? Checking PIT Parition - S III mini i8200 - Galaxy S III Mini Q&A, Help & Troubleshooting

What is this problem?
How I can fix it?
Whenever I try to turn it on, this screen is displayed
i.imgur(dot)com/fheIeZs.jpg
Except, when I press Vol- + Power + Home Button
In this case, this screen is displayed
i.imgur(dot)com/a/uOY9S
What is this problem?
Any doubts, anyone, make me know and I respond in the comments

Related

Please Help Me :(

From about week onwards i am getting this problem.power button is nt workn as previous.Phone automatically get the signal of long press power button.it means automatically it asks "power will be turned off,and you may lose data if...".and also when i press power button it doesnt goes to standby mode.when i long press the power button sometimes it doesnt switch off..As i think the power button dnt work as normal or may it seems that power button keep pressed internally
This was my problem.i went to HTC agent and they said the motherboard has a issue.it may be caused to water drop.and they told it cant be repaired and i shoold replace the motherborad and the MB will cost like hell..
Now i need help of ur guys.
1.) Is there any software to disable the power on/off function?
2.) Or is there any method to automatically press "no" of power off msg when it appears.
Sorry for my bad English ..pls help me..
you have already started a thread regarding your power button HERE ...bad net manners, contact the mods and ask them to close one...
Anyways, from your post, you cannot go into standby mode because of the faulty power button...
So here's what you do, download Pocket Device Power Manager OR psShutXP and install on the mobile...
With this, you will have the standby option available without having to press the power button...
Hope that helps...
Thnx dude.. Sorry for opening a new thread.
Dude still i have a problem..it is 4n automatically prompts the shutdown msg ( power will be turned off...Yes/no) when i am using the phone.i have to press no to use the 4n when it appears.this is a headache to me..is there anyway to diisable this msg or to automatically get press "no" when it appears.
why not try and map the Power button, Long_Power.lnk to another application??
The mapping process is explained HERE ...I think that will help stop that "power will be turned off...Yes/no" message...
Just my 2C's, i am really not sure about this though...
Thnx Dude..it seems to be working..but i need a another small help regarding this..tell me a some kind of an app dat should be mapped to this long power key.the app should not load any true application.it should be just a shortcut.Otherwise behalf of the Power off msg that applicaion will open..it will be another problem.If u can provide me a shortcut which do not actually open any application. i am noob for this..thats y i am asking everything.thnx in advance
pls can any1 help me..can any1 write me a small app dat do not do anything..it means it should not prompt any error msg or do not do anything.i want only a program to work with power button.it means to remap the power button to dat application
no1 can help me?? pls help

Please help me "p1000" doesn't work

please help me
it doesnt work
Also on the screen of death
When the pressure dwell on the play button and Sound reduction button, illuminated only four options, and if you raise my hand closes the other bitter.
The reason is: you want to install Rom and forgot to put repartion and a bit.
sorry for my pad english
المشكله باللغه العربيه
الجهاز مو راضي يشتغل ابد
بس لما اطيل الضغط على زر الهوم وخفض الصوت تنور الخيارات الأربع ولما ارفع يدي يطفي الجهاز
السبب اني جيت اركب روم ونسيت احط الريبارتشن والبت
تكفون ساعدوني
device : galaxy tab p1000 wifi
Volume down and power for about ten seconds to get to download mode, you see the digging android. Then re flash your.pit file with repartition checked.
rangercaptain said:
Volume down and power for about ten seconds to get to download mode, you see the digging android. Then re flash your.pit file with repartition checked.
Click to expand...
Click to collapse
I can not access any position only four options light up When I leave the device closes again
helo
where are you guys ?
please need help
Maybe you can tell us what you see exactly on the screen.
your tab cannot get through download or recovery mode at all?
Only illuminates the four options at the bottom of the screen
The black screen
When I raise my hand from the button disappear the four options
And tried to define the Odin, but to no avail
no recovrey ,, no download
do what the rangercaptain said
on the right most side, there are power button and volume button
it is on the right hand.
you press the power button and the volume down button for 10 seconds.
OR
power off the TAB, then press the power button and volume down button until the text Galaxy Tab appears.
(volume down is the button that you press to reduce the sound volume, power button is the button you press to turn on or off your tab)
and you will see the picture of andorid digging something, put the usb cable on and reflash with the .pit and repartition option checked
I kept pressing the power button for more than a minute and nothing happened
Will try the heating device and then try again
give anouther Solutions
press power and volume down button at the same time ( 2 buttons at the same time, not one at a time)
if this does not work, you need to get to samsung centre

Problem with sensation xl

Hie guys i am facing a problem with sensation xl
its automatically showing power menu options like shutdown, restart(we get when we press power button) & the other is when i click on the arrow button at the bottom(when use to close the app/when we press arrow up button to check recenet apps ) when i press that its automatically taking screen shots . please help me with these issue is these mother board problem or like power button issue ?
my problem is same as these in the below vedio :
http://www.youtube.com/watch?v=uzxNirguGhM
please help me out guys
i think the answer already at the comment section on the video you posted.
it will be hardware problem (power button / mainboard) or your firmware. try to change your rom with full wipe. if it still exist, it is hardware problem I believe.
how to wipe the total rom as i am on new hboot
Its a hardware problem. Phone's power button is malfunctioning and you need to send back to vendor to repair/replace power button.
Change or remove if you are using any Phone Cover/Case.
Power+Home key is the combination to take a screen shot and this means your phone's power button is constantly getting pressed automatically. I believe ROM wont fix this problem unless power button is fixed.

Ativ S Blue Screen After Boot

I have bought a Second hand Ativ S and it turned out to be dev unit, it worked for the most part(occasional crashes), but recently it broke.
After it boots it gets me to a blue screen and then powers off. I can still access the download mode and the system files via USB. But I want to do a factory reset of some sort or at least be able to use it.
Can someone help me out with this? Is there a possibility to re flash it? or is there a combination of buttons i don't know about?
nexaddo said:
I have bought a Second hand Ativ S and it turned out to be dev unit, it worked for the most part(occasional crashes), but recently it broke.
After it boots it gets me to a blue screen and then powers off. I can still access the download mode and the system files via USB. But I want to do a factory reset of some sort or at least be able to use it.
Can someone help me out with this? Is there a possibility to re flash it? or is there a combination of buttons i don't know about?
Click to expand...
Click to collapse
http://support.microsoft.com/kb/2749480 = Steps how to hard reset a WP8 Device
thanks for the help, probably that is a very useful information, but i tried those and it didn't work Is there any way I could flash the device?!
nexaddo said:
thanks for the help, probably that is a very useful information, but i tried those and it didn't work Is there any way I could flash the device?!
Click to expand...
Click to collapse
have tried to hard reset the phone by this steps?
If you can't access your phone's Settings page:
1.Turn off your phone.
2.Turn on your phone again by pressing the volume down button until you see the exclamation mark
3.Then, reset the phone by pressing the following four buttons in this order: Volume up, Volume down, Power, Volume down.
4.Your phone should now reset and restart itself. (It might take a while for the process to complete.)
And it didn't work for you? If not you have go to a Samsung store, probably they will flash you a normal OS to your phone...
Jackson5 said:
have tried to hard reset the phone by this steps?
If you can't access your phone's Settings page:
1.Turn off your phone.
2.Turn on your phone again by pressing the volume down button until you see the exclamation mark
3.Then, reset the phone by pressing the following four buttons in this order: Volume up, Volume down, Power, Volume down.
4.Your phone should now reset and restart itself. (It might take a while for the process to complete.)
And it didn't work for you? If not you have go to a Samsung store, probably they will flash you a normal OS to your phone...
Click to expand...
Click to collapse
I've tried that...it didn't work. I've also went to Samsung and apparently it made it worse. Initially my problem had a blue screen after booting but after I took it back from service the blue screen has disappeared and now the phone just powers down after the boot. THe guys at Samsung told me that the don't have the device number in their database and that the cannot do anything to it....so i'm hopping that some tool will pop-up and I'll be able to flash the device from home.
Also being an Engineering unit when I power the device based on your description it doesn't show me an exclamation mark it just goes dark and if i hook it up to the pc it shows as mass USB storage, and I can access the files on it. So there is something i'm missing for this device in particular.
Thanks anyway for your support.
Thank you again Jackson5...Really...Thank you, i've almost lost hope...after seeing your post and replying to it I said ....what the heck...lets try that again, and it worked...not with your steps exactly...I put the phone into a charger and it started to power up...Windows logo power down..and again power up and shutting down....Meanwhile I pressed Up on the volume and the exclamation mark appeared. and from there, suffice to say that I have a phone, again. So Thanks again
AW: Ativ S Blue Screen After Boot
I'm glad to hear that your phone is running again...
Sent from my GT-I8750 using Board Express
Same problem, help...
It seems Ive got the same problem with my Ativ S, I've tried everything and nothing is working...
Sorry, but can you tell me what buttons exactly and in what order did you press to get to the exclamation mark screen, please? I am sorry but I really cannot understand your explanation (your post) very well, you said:
"Windows logo power down..and again power up and shutting down....Meanwhile I pressed Up on the volume..."
Do you mean logo + power or logo + power + volume down or something else? I cannot understand the part "again power up and shutting down" either...
Thanks
aginor said:
It seems Ive got the same problem with my Ativ S, I've tried everything and nothing is working...
Sorry, but can you tell me what buttons exactly and in what order did you press to get to the exclamation mark screen, please? I am sorry but I really cannot understand your explanation (your post) very well, you said:
"Windows logo power down..and again power up and shutting down....Meanwhile I pressed Up on the volume..."
Do you mean logo + power or logo + power + volume down or something else? I cannot understand the part "again power up and shutting down" either...
Thanks
Click to expand...
Click to collapse
If the phone powers down due to blue screen or any other problem you might encounter, connecting it to a power source will make your phone restart...so basically what happens is the Phone powers up reaches the error and shuts down, but because is plugged to a power source it will power back up. So while you are plugged with the device keep pressing those buttons... Having a Dev unit apparently it worked with the Vloume Up ...
-Press the Volume Down Key + Power Key to turn on the unit
- Still hold the volume down key, the release Power Key.
- Wait for the startup screen booting with an exclamation mark " ! " then release the volume down key.
- Press the following buttons in the following order: press the volume up (high volume key) ==> press volume key down (low volume key) ==> press the power key ==> press volume down key.
- Wait a moment and look at the screen, a message such as loading new software will start the hard reset process
nexaddo said:
If the phone powers down due to blue screen or any other problem you might encounter, connecting it to a power source will make your phone restart...so basically what happens is the Phone powers up reaches the error and shuts down, but because is plugged to a power source it will power back up. So while you are plugged with the device keep pressing those buttons... Having a Dev unit apparently it worked with the Vloume Up ...
-Press the Volume Down Key + Power Key to turn on the unit
- Still hold the volume down key, the release Power Key.
- Wait for the startup screen booting with an exclamation mark " ! " then release the volume down key.
- Press the following buttons in the following order: press the volume up (high volume key) ==> press volume key down (low volume key) ==> press the power key ==> press volume down key.
- Wait a moment and look at the screen, a message such as loading new software will start the hard reset process
Click to expand...
Click to collapse
Cheers, I'm stuck in here and i can't get further.
My machine is an T899 Engineering version

[Q] Broken power button

Hi guys !
My power button just broke on my SGS GT I9000, I was able to change the lock button from power button to volume up button. But when my phone is off, I can't turn it on back without putting it on download mode and flashing the kernel to force a reboot.
Is there a way to rebind the power up button on an other button when the phone is off ?
Thanks for any help
not sure if this'll help http://blog.zackehh.com/remap-the-android-power-button/
Thanks but that's not really helpfull, because I'vre already did that, and my volume up buttons is just recognize as power/lock button when my phone is on, but not when my phone is off.
I did it in the aries-keypad.kl file in the keylayout folder. Maybe I have to do it in an other file ?
have you tried Button Remapper? http://forum.xda-developers.com/showthread.php?t=850464
Yes I've tried, but it says that my phone isn't compatible. I've download the galaxy S version, and it says the same. I think I'll have to repair the button. Any idea about the price ?

Categories

Resources