I have been trying to fix up these good old omap4 devices for N71.
I have no clue if it will boot, but if your brave enough to test I'd love to get some feedback
http://www.emccann.net/dho/3-Vanir-mirror/4-nighties/maserati/
I don't think anyone is going to test or may not consider it due to lack of information.
why would I try this instead of the Lineage 7.1 release that is working?
screenshots? features? bugs?
I've tried it on my second D4 (what I keep for backup and testing).
Installation fails with "E3004: This package is for device: maserati; this device is cdma_maserati"
Careless_ said:
I don't think anyone is going to test or may not consider it due to lack of information.
why would I try this instead of the Lineage 7.1 release that is working?
screenshots? features? bugs?
Click to expand...
Click to collapse
As the sig says, been we have been supporting around 100 devices for 5 years.... if you don't know us, your obviously very new to the ROM community.
And LNG's 7.1 omap4 repo is a red hot disaster. That's what I am trying to fix.
wsemi said:
I've tried it on my second D4 (what I keep for backup and testing).
Installation fails with "E3004: This package is for device: maserati; this device is cdma_maserati"
Click to expand...
Click to collapse
Thanks! Will investigate.
DHO said:
if you don't know us, your obviously very new to the ROM community.
Click to expand...
Click to collapse
then it shouldn't be hard for you to include a link to a main page for info about your ROM if it's so popular... or at least provide screenshots. I've been on this site since 2010... definitely not new to the ROM community- still haven't heard of your ROM. perhaps you're not as popular as you think.
post a link and i might be interested in giving it a shot...
wsemi said:
I've tried it on my second D4 (what I keep for backup and testing).
Installation fails with "E3004: This package is for device: maserati; this device is cdma_maserati"
Click to expand...
Click to collapse
New test build up. Should solve that issue.
DHO said:
New test build up. Should solve that issue.
Click to expand...
Click to collapse
After wiping and installing in stock slot then rebooting, I just get a black screen. I left it for about 10 mins, and eventually it rebooted itself and did the same again, sorry.
DHO said:
As the sig says, been we have been supporting around 100 devices for 5 years.... if you don't know us, your obviously very new to the ROM community.
Click to expand...
Click to collapse
but doesn't look like much development for Motorola Devices...
---------- Post added at 05:43 PM ---------- Previous post was at 05:42 PM ----------
and moto devices are quite different then most other Androids
hello . after full wipe (except internal/external memory ) and install => black screen . wait 10-15 min , not result
moodroid said:
After wiping and installing in stock slot then rebooting, I just get a black screen. I left it for about 10 mins, and eventually it rebooted itself and did the same again, sorry.
Click to expand...
Click to collapse
acbka said:
hello . after full wipe (except internal/external memory ) and install => black screen . wait 10-15 min , not result
Click to expand...
Click to collapse
Thanks, would be great if pulling a log is possible. If not thank you for giving the build a try.
How could I obtain the log during boot? I think adbd is not started yet.
DHO said:
Thanks, would be great if pulling a log is possible. If not thank you for giving the build a try.
Click to expand...
Click to collapse
wsemi said:
How could I obtain the log during boot? I think adbd is not started yet.
Click to expand...
Click to collapse
might be an install log on Sd card
should be able to mount storage in safestrap recovery (twrp)
Sent from my sailfish using XDA Labs
wsemi said:
How could I obtain the log during boot? I think adbd is not started yet.
Click to expand...
Click to collapse
You need to plug into your computer and adb logcat
DHO said:
You need to plug into your computer and adb logcat
Click to expand...
Click to collapse
i try install to stock slot . use safestrap 3.75 and full wipe:
stock slot
if connect to usb == Error: “USB Device not recognized''
I'll try later install to "safe slot"
The result will be written later
safe slot:
if connect to usb == Error: “USB Device not recognized''
u have any ideas ?
Related
BUGS
Wired headset/headphone is not working.
CM Bugs - Boot Animation disappears.
Torch - Hangs/Causes FC
Camera - Freezes after a snapshot. (Possible Fix)
Click to expand...
Click to collapse
DOWNLOAD
v3.8.2
This is a completely different port and all previous fixes will be invalid. And you will have to erase data and cache and dalvik-cache completely!
Do a factory wipe.
Flash this ROM.
ROM
Boot into the ROM.
Then, reboot into recovery and flash Gapps.
GApps
Boot into the ROM. Setup your Google Account.
Reboot into the recovery and flash this fix.
Fix-2 for 3.8.2
Click to expand...
Click to collapse
SCREENSHOTS will come soon.
For now, please flash this and provide us with some feedback. Let's get this thing up and running. :highfive: :laugh:
CREDITS
@fareeed
@Taylor_Swift
@Everyone who worked on getting MIUI running
Click to expand...
Click to collapse
Omar! This is for you lol :good:
I shall take this.
And this last one.
so, sd card doesn't work with this? sorry for being overzealous.. just itching for MIUI...
alnikki25k said:
Omar! This is for you lol :good:
Click to expand...
Click to collapse
Thanks bro. I'll be posting fixes and also Sony based builds too
Sent from my C6603 using xda premium
theminigame said:
so, sd card doesn't work with this? sorry for being overzealous.. just itching for MIUI...
Click to expand...
Click to collapse
Yup. This was ported from the One. So expected to not work. But shouldn't be difficult to fix that.
Thanks a lot for what all of you did to getting MIUI on the Xperia Z !
I will be following this thread to give you feedback.
On the other thread, i mentioned my data network didn't work, forget that. I check my access point and it work perfectly now.
But i was really surprised when i wanted to go to my clockworkmod and i saw a "Teamwin mod"-thing... It's not very kind to do some thing we didn't want...
Somebody have a *.zip to get back my old clockworkmod ? Thanks
The MIUI V5 Rom work very well. Unfortunately, there is the SD Card problem who cause a lot of ForceClose. But i'm sure you will get it work.
Keep the good work guys !
PS: Sorry for my bad english speaking, i'm french.
EmryX said:
On the other thread, i mentioned my data network didn't work, forget that. I check my access point and it work perfectly now.
But i was really surprised when i wanted to go to my clockworkmod and i saw a "Teamwin mod"-thing... It's not very kind to do some thing we didn't want...
Somebody have a *.zip to get back my old clockworkmod ? Thanks
Click to expand...
Click to collapse
The recovery is built into the kernel. If you want me to post CWM, I shall post another boot.img. However, I do suggest you to try TWRP. It's much faster and easier.
The recovery is built into the kernel
Click to expand...
Click to collapse
Oh, i didn't know that. Sorry
I don't want to bother you with this. But if you could teach me how i can put my recovery on your build, i will be happy
And keep Mega.Co for the build upload, it's awesome and fast !
Fix-1 By lzyllp.
Fix google pinyin input FC
remove unused settings option from One
add customize screen key positions
fix wrong storage list in framework-res but storage still not work now
http://www.mediafire.com/download/0q3vn350kq0v3mh/Fix-1.zip
for google aosp input FC.
U only need take the lib from input apk and put it into system lib
Some screenshots
Perfect !!!miui are the best rom ever!!!!
alnikki25k said:
Yup. This was ported from the One. So expected to not work. But shouldn't be difficult to fix that.
Click to expand...
Click to collapse
I'm guessing some changes in vold.fstab
Sent from my C6602 using Tapatalk 4 Beta
Crashes in Permission manager, so I can't get root.
[email protected] said:
Crashes in Permission manager, so I can't get root.
Click to expand...
Click to collapse
SuperSU. Just got Settings/About to work as well
Sent from my C6603 using xda premium
Sorry @alnikki25k for a bit of a thread steal (its OK we're a team). You know this means. Sense 5.0 from the One is possible. Forget our Droid DNA port cause that ruined my phone (Sony are replacing it). I'll talk later on Hangouts in more depth cause I had a Sense 5.0 ROM that booted (stuck on the boot screen just like the original versions of yours and my MIUI builds, However Android being Android, ADB won't work...)
Let me know what you think
Sent from my C6603 using xda premium
Alhaddad said:
I'm guessing some changes in vold.fstab
Sent from my C6602 using Tapatalk 4 Beta
Click to expand...
Click to collapse
The storage maybe the services.jar problem.
In services.jar.out\smali\com\android\server the all filename start with MountService
I think we need patch some code from yuga
this services mount the usb storage
Taylor_Swift said:
Sorry @alnikki25k for a bit of a thread steal (its OK we're a team). You know this means. Sense 5.0 from the One is possible. Forget our Droid DNA port cause that ruined my phone (Sony are replacing it). I'll talk later on Hangouts in more depth cause I had a Sense 5.0 ROM that booted (stuck on the boot screen just like the original versions of yours and my MIUI builds, However Android being Android, ADB won't work...)
Let me know what you think
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
I was actually thinking about this as well. If we could get Sense 5 to work somehow, it would be fantastic! And go ahead and steal lol. I am working on mounting the storage now.
Introduction:
This is a restore zip for restoring/debricking a molly device (ADT-1).
The contents are as close to stock as possible, and is intended to fix broken otas.
Click to expand...
Click to collapse
File List:
update-molly-Stock-LPV79-1.zip
Click to expand...
Click to collapse
FAQ:
Will this fix my <non molly device>?
No, this rom is only for mollys, it will brick any other device.
Will OTAs work after flashing this?
Yes, that is the purpose of this
Do I need to be on a certain bootloader to use this?
No, it includes the original bootloader.
Do I need a custom recovery to flash this?
Yes, the stock recovery will not accept update zips that are not signed by google
Is this rooted?
No, the stock rom is not rooted, neither is this
My device won't finish booting after flashing.
If you were not originally on the same rom, you may need to do a factory reset to finish the process. Android does not like rom downgrades without a factory reset
Click to expand...
Click to collapse
Changelog:
Nov 3, 2014: Initial Page
Click to expand...
Click to collapse
2char
I made a gallery of it because I felt like it: Update - Imgur
Awesome! Thanks! I needed a way to restore my OTA abilities after rooting and doing some testing for someone. Did you make these yourself? And how? If you don't mind me asking. I didn't think dd would work without root.
death2all110 said:
Awesome! Thanks! I needed a way to restore my OTA abilities after rooting and doing some testing for someone. Did you make these yourself? And how? If you don't mind me asking. I didn't think dd would work without root.
Click to expand...
Click to collapse
All custom recoveries have root by default, my ADT1 isnt rooted, I did all my work though CWM.
TheManii said:
All custom recoveries have root by default, my ADT1 isnt rooted, I did all my work though CWM.
Click to expand...
Click to collapse
Duh. Didn't think of that... Haha. Thanks!
Could someone who has updated to LPX13D please post a system dump? Im needing it for an OUYA port that im working on. Thanks
It's already been posted here:
http://forum.xda-developers.com/showpost.php?p=56186872&postcount=69
death2all110 said:
It's already been posted here:
http://forum.xda-developers.com/showpost.php?p=56186872&postcount=69
Click to expand...
Click to collapse
Thanks, never would have found it there.
TheManii said:
2char
Click to expand...
Click to collapse
Thanks! Do you have to have a USB keyboard in order to move around in CWM on the ADT-1?
ScubaXsays said:
Thanks! Do you have to have a USB keyboard in order to move around in CWM on the ADT-1?
Click to expand...
Click to collapse
Yes a USB keyboard is needed to move around CWM on the ADT-1
death2all110 said:
Yes a USB keyboard is needed to move around CWM on the ADT-1
Click to expand...
Click to collapse
Thanks so much for the quick response, you're the best.
ScubaXsays said:
Thanks so much for the quick response, you're the best.
Click to expand...
Click to collapse
No problem. I had the same problem initially
death2all110 said:
Yes a USB keyboard is needed to move around CWM on the ADT-1
Click to expand...
Click to collapse
ScubaXsays said:
Thanks so much for the quick response, you're the best.
Click to expand...
Click to collapse
Yes you need a usb keyboard to use CWM currently, there may be an update in the future to enable the dev button on the back to select in cwm like it does in fastboot. Until if/when that happens you either need a keyboard or to do everything manually via adb.
I don't have a keyboard however, I did all my work/testing with only adb.
TheManii said:
Yes you need a usb keyboard to use CWM currently, there may be an update in the future to enable the dev button on the back to select in cwm like it does in fastboot. Until if/when that happens you either need a keyboard or to do everything manually via adb.
I don't have a keyboard however, I did all my work/testing with only adb.
Click to expand...
Click to collapse
Thanks for the articulate follow-up. I started to do things manually via ADB. :good:
anyone can post a complete lpx13D CWM backup , stock recovery or at least system.img
I've messed up my ADT1 and it can't seem to take the image I've found yet
@TheManii Are there any custom roms or anything like that for the ADT-1? I just got one in the mail from I assume google. I'm ready to begin , but I don't honestly know what people are interested in seeing on this device I have a madcatz mojo using all the adt-1 binaries except audio running cm-12 and android tv from this device. So if anyone is interested in that let me know please.
Unjustified Dev said:
@TheManii Are there any custom roms or anything like that for the ADT-1? I just got one in the mail from I assume google. I'm ready to begin , but I don't honestly know what people are interested in seeing on this device I have a madcatz mojo using all the adt-1 binaries except audio running cm-12 and android tv from this device. So if anyone is interested in that let me know please.
Click to expand...
Click to collapse
Hello UD,
There isn't any custom roms for the ADT-1 (So yours would be the first)
I for one would love to see a more recent build than the last OTA (LPX13D - OCT 29th) There have been rumors that we'd get the final Android Lollipop but nothing has surfaced.
How much work is involved in rolling an AOSP+ADT-1 Binaries+Android TV dependencies?
Cheers Rob.
halfluck said:
Hello UD,
There isn't any custom roms for the ADT-1 (So yours would be the first)
I for one would love to see a more recent build than the last OTA (LPX13D - OCT 29th) There have been rumors that we'd get the final Android Lollipop but nothing has surfaced.
How much work is involved in rolling an AOSP+ADT-1 Binaries+Android TV dependencies?
Cheers Rob.
Click to expand...
Click to collapse
It's possible https://www.youtube.com/watch?v=Og-GDeRhJno but I could not get all the apps correctly working the main one being playstore , but I will try again look at the android build number and build date. I basically made a google apps package based on the adt-1 this is before I had one so possibly now I can get us an aosp 5.0.2 base working the Mojo in terms of hardware is similar to the adt-1 and for me to boot 5.0 on the mojo I needed adt-1 updated tegra 4 binaries so this shouldn't be hard at all once I work out the playstore issues.
Unjustified Dev said:
It's possible https://www.youtube.com/watch?v=Og-GDeRhJno but I could not get all the apps correctly working the main one being playstore , but I will try again look at the android build number and build date. I basically made a google apps package based on the adt-1 this is before I had one so possibly now I can get us an aosp 5.0.2 base working the Mojo in terms of hardware is similar to the adt-1 and for me to boot 5.0 on the mojo I needed adt-1 updated tegra 4 binaries so this shouldn't be hard at all once I work out the playstore issues.
Click to expand...
Click to collapse
Wow that is really impressive work, The current build on the ADT-1 is flaky at best for me, i'd love to see how a more recent build performs and if it prevents me from having to do a daily reboot.
Cheers Rob.
@Unjustified Dev just got mine on Tuesday. are you thinking releasing sources on your team github. i saw that a device and kernel repository was created but they are empty.
PS: nice to talk to you again been a while.
Hi Folks
I just start developments of Google AOSP rom based on 7.1.2 R6 for our P8 Lite 2017 PRA-LX1, this topic will show you only the developments progress of that rom, will be released once fix most of bugs.
This is only an info topic, do not spam it because will be closed at ended works.
the release builds topic will be on android developments section.
AOSP Recovery: fixed & booting.
AOSP System.
Audio.
Bluetooth.
Camera.
Display.
Fingerprints.
GPS.
Graphics: gralloc & hwcomposer.
Internal & External Storage.
Multimedia.
NFC.
RIL.
Sensors.
Wifi
Note:
Each time when I fix something, will be strike..keep in touch
Great job! First rom is finnaly coming to PRA-LX1!
P.S.: Also, you P8Lite 2015 has finished repairing?
Thank You.
I Was Waiting For This.
Because If You Remember My Device Won't Boot Cause I Wiped The System Partition By Mistake.
XTutorials said:
Great job! First rom is finnaly coming to PRA-LX1!
P.S.: Also, you P8Lite 2015 has finished repairing?
Click to expand...
Click to collapse
Yup
I just send the phone yesterday, no holidays on this period in italy, guess should be repaired quickly.
Finally an AOSP ROM!
Is this still using the stock kernel?
YSFYoussef480 said:
Thank You.
I Was Waiting For This.
Because If You Remember My Device Won't Boot Cause I Wiped The System Partition By Mistake.
Click to expand...
Click to collapse
Can't you use the Huawei update extractor to extract UPDATE.APP and flash that? Or get someone to make a system backup in TWRP and send it to you?
Vinnipinni said:
Can't you use the Huawei update extractor to extract UPDATE.APP and flash that? Or get someone to make a system backup in TWRP and send it to you?
Click to expand...
Click to collapse
Tried Everything !!!
YSFYoussef480 said:
Tried Everything !!!
Click to expand...
Click to collapse
I don't have the 2017 version, but what does it say? Can't you flash the system via fastboot? Or use stock recovery and force update to update it? Just remember that you need a FULL package. On most Huawei phones you can just flash a FULL package I'm TWRP. Just OTA doesn't work because it doesn't include a full system.img most of the times.
Vinnipinni said:
I don't have the 2017 version, but what does it say? Can't you flash the system via fastboot? Or use stock recovery and force update to update it? Just remember that you need a FULL package. On most Huawei phones you can just flash a FULL package I'm TWRP. Just OTA doesn't work because it doesn't include a full system.img most of the times.
Click to expand...
Click to collapse
No, I Can't
boofman said:
Finally an AOSP ROM!
Is this still using the stock kernel?
Click to expand...
Click to collapse
Yes still use stock kernel.
haky 86 said:
Yes still use stock kernel.
Click to expand...
Click to collapse
Is There Any ETAs,Please ?!
YSFYoussef480 said:
Is There Any ETAs,Please ?!
Click to expand...
Click to collapse
no, once get booted I"ll post screenshots and modding this phone will be very hard because no kernel source for our pra-lx1 yet.
yeah sounds great! will this rom be prerooted?
and will there be more free space in local storage? =)
xpatze85x said:
yeah sounds great! will this rom be prerooted?
and will there be more free space in local storage? =)
Click to expand...
Click to collapse
Once you have root, even with the Stock ROM, you can already start uninstalling System Apps to debloat.
---------- Post added at 05:43 AM ---------- Previous post was at 05:41 AM ----------
haky 86 said:
Yes still use stock kernel.
Click to expand...
Click to collapse
This is my first Huwei device, do they usually release Sources for Devs?
boofman said:
This is my first Huwei device, do they usually release Sources for Devs?
Click to expand...
Click to collapse
They released the source code for p8, and some other device but late. Kirin isn't dev friendly AFAIK
Reserved
-no signs of booting about aosp 7.1.2.
-anyone would like to try it here my repos:
https://github.com/hak86/android_device_huawei_prague
https://github.com/hak86/android_vendor_huawei_prague
I send a message via email to huawei about sending cd that contain source code of this phone, but I've some doubt that will respond..who's know..
haky 86 said:
-no signs of booting about aosp 7.1.2.
-anyone would like to try it here my repos:
https://github.com/hak86/android_device_huawei_prague
https://github.com/hak86/android_vendor_huawei_prague
I send a message via email to huawei about sending cd that contain source code of this phone, but I've some doubt that will respond..who's know..
Click to expand...
Click to collapse
So Is There Any Hopes For This Rom !!
Cause I'm So Excited For This !!
I Need It Cause My Device Won't Boot Cause I Wiped The System Partition By Mistake !
I Can't Do Anything With It Except Staring At It !
Soo Will This Rom Release Soon ???
YSFYoussef480 said:
So Is There Any Hopes For This Rom !!
Cause I'm So Excited For This !!
I Need It Cause My Device Won't Boot Cause I Wiped The System Partition By Mistake !
I Can't Do Anything With It Except Staring At It !
Soo Will This Rom Release Soon ???
Click to expand...
Click to collapse
Have you tried restoring the stock ROM using ADB? It worked for me..
boofman said:
Have you tried restoring the stock ROM using ADB? It worked for me..
Click to expand...
Click to collapse
How ?!
YSFYoussef480 said:
How ?!
Click to expand...
Click to collapse
Sorry, I meant installing, not restoring. It's just bascally downloading the ROM, extracting the contents using Huawei update extractor, and using ADB to push the files in. You will need to reinstall TWRP and Root afterwards..Google is your friend, there are instructions out there, as there are 3 ways to install the stock ROM: using the updater on your phone, using the key combo, and the 3rd one being ADB.
Welcome to a world of new they called me walker or walkerblue
FLASH AT YOUR OWN RISK!!
Today im bringing you guys a twrp that still in works
If any devs that would like to help to get all working make our Z2 force page grow faster
I'll be making a hangout chat for devs only!
https://hangouts.google.com/group/ksHPFhZPgjPZBd292
TWRP boots so far for T-Mobile ,Sprint
First I want to thank these people for making everything easy and possible for us in XDA
Thanks to @shimp208 for making Minimal ADB tool easy to use and also thanks to TWRP team for making root easy
Okay now to install this recovery
First make sure you all all drives on computers installed
USB Link: https://motorola-global-portal.custhelp.com/app/answers/prod_detail/a_id/78830/p/30,2625,665
ADB Link: https://forum.xda-developers.com/showthread.php?t=2317790
Beta recovery Link: https://drive.google.com/open?id=0BxohOX1FGysPaV9ObDVFVjNZWU0
Step Two: Ones you have all your files now you need is the commond to flash this recovery img
So in ADB tools make sure you put the recovery in the folder on where you have it located in your computer
then make sure you hit cmd-here or the icon app that tool left you on your desktop
Then ones that happens make sure you have debugging check on your device
then run this on cmd "adb devies" to make sure your device is listed
then after you have done that make sure you run this commend next "adb reboot bootloader"
ones you do that then your phone should take you too bootloader page then you can flash recovery file
then you will put this commend "fastboot flash boot beta.img""
then ones you do that make sure you use your arrows on your side of your device to get into recovery
Then BOOM your have your twrp flashed
Hit the Big Thumps up for me
Five Star this page
Share Share this page
Sweet bro! I just got this phone. Gonna try it out tomorrow. I was gonna try and build TWRP tomorrow. Thanks for doing the leg work!
Infect_Ed said:
Sweet bro! I just got this phone. Gonna try it out tomorrow. I was gonna try and build TWRP tomorrow. Thanks for doing the leg work!
Click to expand...
Click to collapse
still needs work but if get more people to do it help we can have it done before then and i can start to make a rom for this phone
walkerblue2023 said:
still needs work but if get more people to do it help we can have it done before then and i can start to make a rom for this phone
Click to expand...
Click to collapse
I Dev too. I have built DU, and Candy for the v20. Never released tho. I'm also a part of a new Rom project bring up that's working on Oreo. It's a reincarnation of Desolation ROM. So if you could share a link to your GitHub that would be awesome.
Infect_Ed said:
I Dev too. I have built DU, and Candy for the v20. Never released tho. I'm also a part of a new Rom project bring up that's working on Oreo. It's a reincarnation of Desolation ROM. So if you could share a link to your GitHub that would be awesome.
Click to expand...
Click to collapse
thier is no github for it yet but for some reason i was able to get it too boot kinda weird got the stock recovery and twrp recovery made it into one and thier you go it booted up on the phone but with no root
What tree did you use?
Infect_Ed said:
What tree did you use?
Click to expand...
Click to collapse
mk is only the one that booted it up
Sweet
Sent from my SM-N930F using XDA-Developers Legacy app
All good news!!
walkerblue2023 said:
mk is only the one that booted it up
Click to expand...
Click to collapse
What do you mean mk?
Infect_Ed said:
What do you mean mk?
Click to expand...
Click to collapse
My bad I mean mtk tool
Infect_Ed said:
What do you mean mk?
Click to expand...
Click to collapse
Z2 play what I used
[delete]
Useless, don't flash. This is a phenomenal way to brick your device, as it doesn't work to begin with.
Wait for the devs who are actually working on it for THIS DEVICE. This screams copy paste job.
slaytanic said:
Useless, don't flash. This is a phenomenal way to brick your device, as it doesn't work to begin with.
Wait for the devs who are actually working on it for THIS DEVICE. This screams copy paste job.
Click to expand...
Click to collapse
How if it boots for me I might have uploaded the wrong file
shouldn't it be "fastboot flash recovery beta.img"?
FrankenDroid said:
shouldn't it be "fastboot flash recovery beta.img"?
Click to expand...
Click to collapse
Recovery is in the kernel on this phone.
Sent from my Moto Z (2) using Tapatalk
Ah, interesting. I think it's probably time to get smart on this new partitioning stuff
slaytanic said:
Useless, don't flash. This is a phenomenal way to brick your device, as it doesn't work to begin with.
Wait for the devs who are actually working on it for THIS DEVICE. This screams copy paste job.
Click to expand...
Click to collapse
Worked perfectly on my Sprint Z2 Force. Please don't bash a developer who is starting support for our device. @walkerblue2023 You can add Sprint model is working with this boot image. Thank you for adding your knowledge to our device!
Uzephi said:
Worked perfectly on my Sprint Z2 Force. Please don't bash a developer who is starting support for our device. @walkerblue2023 You can add Sprint model is working with this boot image. Thank you for adding your knowledge to our device!
Click to expand...
Click to collapse
thank you for the information and also cant wait for your kernel
Hey
Has anyone tried installing and using AOSP Android 10 GSI Rom? Is it working?
I found this on: https://www.getdroidtips.com/aosp-android-10-realme-x2-pro/
ya im backing up my phone now to try it out, as i cant even stand the CN Stock Rom, im convincing my self to keep trying i just hate everything about it! only thing that's cool is Dark mode lol
will let you know how things go!
my worries are the camera not working wifi and bluetooth although it say everything should work!
lets see
kkarnaout said:
ya im backing up my phone now to try it out, as i cant even stand the CN Stock Rom, im convincing my self to keep trying i just hate everything about it! only thing that's cool is Dark mode lol
will let you know how things go!
my worries are the camera not working wifi and bluetooth although it say everything should work!
lets see
Click to expand...
Click to collapse
Waiting for your reply!!!! I hope it works well
I read on telegram that the rom GSI pixel experience had the best results on the x2 Pro.
[/COLOR]
lutherkingmartin said:
I read on telegram that the rom GSI pixel experience had the best results on the x2 Pro.
Click to expand...
Click to collapse
can you give me a link? as im trying Android 10, so that i dont lose the 90hz
https://github.com/EnesSastim/Downloads/releases
Well not able to get it to boot! TWRP say all is okay but no clue why its not booting up! keeps giving me the error " The current image(boot/recover) have been destroyed and can not boot. please flash the correct image or contract customer service to fix it."
You flash a/b rom ?
yup i tried practical every A/b rom, the first one i tried at least went to an android boot loop, the rest giving me the same error! so no idea !
let me know if there is anything to try before going back the the ugly China rom
kkarnaout said:
yup i tried practical every A/b rom, the first one i tried at least went to an android boot loop, the rest giving me the same error! so no idea !
let me know if there is anything to try before going back the the ugly China rom
Click to expand...
Click to collapse
Well that could be the issue as you should be flashing A only images on the X2 Pro......:good:
Duncan1982 said:
Well that could be the issue as you should be flashing A only images on the X2 Pro......:good:
Click to expand...
Click to collapse
oh really i didnt know ! my phone showed that i should get A/B!!! ill do that now! plus i found out that the TWRP that works is the one from China not any other.
kkarnaout said:
oh really i didnt know ! my phone showed that i should get A/B!!! ill do that now! plus i found out that the TWRP that works is the one from China not any other.
Click to expand...
Click to collapse
Not sure where that info came from? But apparently our X2 only has one partition so just A GSI Rom's not A,B......:good:
Duncan1982 said:
Not sure where that info came from? But apparently our X2 only has one partition so just A GSI Rom's not A,B......:good:
Click to expand...
Click to collapse
a silly question but i download then an ARM64 A only file right? i tried one now i entered boot loops!
Duncan1982 said:
Not sure where that info came from? But apparently our X2 only has one partition so just A GSI Rom's not A,B......:good:
Click to expand...
Click to collapse
I read on Telegram that this software said our X2 only has A partition but in reality it is A/B. I don't know if it's true...
Hmmm very confusing , I'm really just going by that app, how accurate it is I don't know, but yes it should be Arm64 A only ......:good:
Duncan1982 said:
Hmmm very confusing , I'm really just going by that app, how accurate it is I don't know, but yes it should be Arm64 A only ......:good:
Click to expand...
Click to collapse
i practically tried every thing possible! the good thing is i can at least go back to stock lol! i have no idea why it gets stuck and no clue whats the issue! ill turn the phone back to stock and check the app more!
lets see!
i was hoping to have a stock android experience with normal notifications and all that, as i am totally not enjoying my phone other than for games and that should not be the case
---------- Post added at 11:59 PM ---------- Previous post was at 11:45 PM ----------
if you check the app treble info, you will see that it say use A/B operating system and Architecture is ARM64! so i can say nothing actually worked.
kkarnaout said:
i practically tried every thing possible! the good thing is i can at least go back to stock lol! i have no idea why it gets stuck and no clue whats the issue! ill turn the phone back to stock and check the app more!
lets see!
i was hoping to have a stock android experience with normal notifications and all that, as i am totally not enjoying my phone other than for games and that should not be the case
---------- Post added at 11:59 PM ---------- Previous post was at 11:45 PM ----------
if you check the app treble info, you will see that it say use A/B operating system and Architecture is ARM64! so i can say nothing actually worked.
Click to expand...
Click to collapse
Can you try one more thing? In Twrp head to advanced and file manager, delete rw-system.sh (after flashing the GSI) , should be found in Data I think.....had to do it on my Samsung, but might be applicable here to ......:good:
Duncan1982 said:
Can you try one more thing? In Twrp head to advanced and file manager, delete rw-system.sh (after flashing the GSI) , should be found in Data I think.....had to do it on my Samsung, but might be applicable here to ......:good:
Click to expand...
Click to collapse
so i delete the install or install then delete?
kkarnaout said:
so i delete the install or install then delete?
Click to expand...
Click to collapse
To be clear sorry first flash the GSI then delete rw-system.sh, I am almost certain this will get it booting .....:good:
Duncan1982 said:
To be clear sorry first flash the GSI then delete rw-system.sh, I am almost certain this will get it booting .....:good:
Click to expand...
Click to collapse
cant find any rw-system.sh ... there is only system alone! any folder i should go into or it should be on the root