Database Develop

[Q] Fastboot mode problem - Xperia SP

Hi guys, got a slight problem with entering fastboot mode. I hold the volume-up key and connect me USB cable but rather than getting the noise verifying it's been connected ok, I get that dull sound it makes when it hasn't worked. It won't even let me install the drivers and in device manager it comes up as "S1boot Fastboot" for a few seconds before then going into battery charging mode. I downloaded the Android SDK latest and replaced the USB driver INF file with the one sony give you but it didn't work so reversed back to the other driver the SDK manager installs and that didn't work either.
I've been through the tutorials and even tried to update the driver in device manager in the few seconds it stays there but that didn't work either! USB debugging is enabled too!
Please help, I'm not a noob and have done fastboot booting before and yes for those who may ask have already checked to make sure the bootloader can be unlocked and yes it can also the phone is NOT branded and is unlocked to all networks.
Any help will be appreciated, thanks!
Dave.

Are you on Windows 8? Using USB 3.0?
"As your flesh bears the sigil....your name is that....of a recusant."

First be sure you're using a 2.0 usb port, if this is ok maybe it's a windows 8 driver problem, so you should try this http://forum.xda-developers.com/showthread.php?t=2170114. It works for me

For also fastboot and flashmode come for 5 Sec. So Make sure you prepare the file and attach the device to fastboot or flashmode when it is asked.

Still problems
I'm still working on a 2012 laptop with Windows 7 Premium installed. It's fully up to date and all the drivers are installed properly I just don't get it, I've tried everything and it's still making the noise as if it won't connect. I don't know what to do to be honest. Also yes it is USB 2.0.

darkdemon32 said:
I'm still working on a 2012 laptop with Windows 7 Premium installed. It's fully up to date and all the drivers are installed properly I just don't get it, I've tried everything and it's still making the noise as if it won't connect. I don't know what to do to be honest. Also yes it is USB 2.0.
Click to expand...
Click to collapse
Hmm...how many USB ports are being used when you're flashing the phone?
"你看到了没? 爱让我流胆怯的泪..."
"Have you seen it? Love has made me cry cowardly tears..."

Fastboot with Xperia XP
I have the same problem, can't get it to fastboot mode.
Tried the Windows 8 zith USB 2, and also on XP machine where I was succesfully used it for a Xperia U.

Dump Windows..
Opensource rules!!! I switch on a VM with Windows only when I need Photohshop. Otw, Ubuntu and openSUSE FTW!!

sarkar1990 said:
Dump Windows..
Opensource rules!!! I switch on a VM with Windows only when I need Photohshop. Otw, Ubuntu and openSUSE FTW!!
Click to expand...
Click to collapse
Opensource forever)))
Sent from my ME371MG using xda app-developers app

same problem...

m having same kind of problem i was trying to flash boot img from cm 11 but fast boot isnt recognizing my device any more.my sp is rooted bootloader unlocked.fast boot was recognizing it yesterday.please tell me what to do

What I did was use a Windows XP machine.
Couldn't get it to work on my Windows 7/8, because of the restrictions in driver signatures.
Sent from my C5303 using Tapatalk

fastboot
darkdemon32 said:
Hi guys, got a slight problem with entering fastboot mode. I hold the volume-up key and connect me USB cable but rather than getting the noise verifying it's been connected ok, I get that dull sound it makes when it hasn't worked. It won't even let me install the drivers and in device manager it comes up as "S1boot Fastboot" for a few seconds before then going into battery charging mode. .
Click to expand...
Click to collapse
I have a similar problem. the power light lights up blue then passes into the phone starts loading mode
Sorry for bad English

The updated version (09.14) don't work properly. It doesn't enable me to go to Flashmode. Uninstalled and used the previous version and it worked as it should, no issues entering Flashmode.

i might have actually found the solution. im on the 4.3fw build version 12.1.a.1.201... in my case, my pc will automatically install the drivers for mass storage giving me no chance to update the driver to the one from sony.
you need to do step 9. and 10. if you havent done so from http://unlockbootloader.sonymobile.com/instructions
what i did was allow developer settings and allow debugging via usb.
plug in and attempt to go in to fastboot and obviously it'll fail.
go to device manager. (control panel->hardware and sound->device manager) quickly scroll down go to other devices. you will see s1fastboot (or something like that) if you're quick enough, if not, in my case, the phone will go in to charging mode.
what i did was to disable xperia sp mass storage from disk drives category too.
right click on it and select update driver software and you will select the file you've unzipped (following step 9 and 10 sony's instructions).
after it has finished updating, unplug your usb and attempt to enter fastboot, it should work.
PS: im no expert, this solution might be out there somewhere already or it could just be a great coincidence. some of these steps might not be useful even.

Had this problem and found a funny solution: I switched my cable and the port I was using. Both Ubuntu and Windoze 7 failed on both fastboot and flash mode, even though in both the phone would charge. I grabbed a spare micro USB cable and plugged it into the front of the PC; voila. Now the phone is rooted and running the latest CM.

Need a final solution for this problem
I don't know what to do!!! The problem is this, very similar to the others mentioned above,: When i conect my xperia sp to fastboot mode, pressing volume up while plugging in usb cable, the phone led turns to blue for few seconds and than it just turns to red showing on the screen the battery image( normal charging mode)...... I' m using windows xp and a rooted xperia sp whit cm11 (for locked bootloader obviously). Just two last things:
the phone can be unlocked( I checked it) and fastboot worked the same as now with stock xperia sp firmware.
Please i need a final and a certain solution for this problem!!!
i'll be very thankful to anyone who give me a hand!!!!

TheTras said:
I don't know what to do!!! The problem is this, very similar to the others mentioned above,: When i conect my xperia sp to fastboot mode, pressing volume up while plugging in usb cable, the phone led turns to blue for few seconds and than it just turns to red showing on the screen the battery image( normal charging mode)...... I' m using windows xp and a rooted xperia sp whit cm11 (for locked bootloader obviously). Just two last things:
the phone can be unlocked( I checked it) and fastboot worked the same as now with stock xperia sp firmware.
Please i need a final and a certain solution for this problem!!!
i'll be very thankful to anyone who give me a hand!!!!
Click to expand...
Click to collapse
Are you trying to unlock your phone?
Have you installed device specific/fastboot/flashmode drivers via FlashTool? If you are on Windows 8/8.1, you need to disable driver verification to get it done.
Alternatively if you just wanna unlock your bootloader, you can use the BLU option in FlashTool. Again all drivers will need to be properly installed for your phone to be detected correctly.
You say you had the same problem with stock firmware which means you probably haven't setup adb/fastboot properly on your PC. Does your phone get detected correctly in Device Manager? Have you tried installing drivers via Device Manager?

....
So the solution is installing flashtool and installato drivers via Emma?? Thanks forma the attention!!

TheTras said:
So the solution is installing flashtool and installato drivers via Emma?? Thanks forma the attention!!
Click to expand...
Click to collapse
I meant install drivers via FlashTool. Go to C:\Flashtool\drivers or wherever you have installed Flashtool and run the Flashtool-drivers.exe.
Select flashmode drivers, fastboot drivers and common drivers viskan board (SP drivers) and install them. Like I said if you are on Win 8/8.1, you will have to disable driver signature enforcement. Just look it up in YouTube and follow a tutorial.

[Q] LG P970H S/W Screen

Well My sister and her boyfriend were trying something whit her phone, I dont have a clue what the hell they were trying, at the end of the day, she comes to me with her LG P970H with the screen S/W Upgrade please wait while upgrading.
I try to Connect the Phone to the PC with the battery and The Pc makes a Sound and says that the USB is not recognized.
I connect the Phone without Battery And the same happens, Sound and not recognized.
Connect Pressing the Vol - , Same happens
Connect Pressing the Vol + Same Happens
Connect Pressing the both buttons with and without the battery Same Happens.
Allright then its the drivers, I go Ahead and download the Lasted Usb Drivers from LG, Try again and nothing new happen.
Download some Old Usb Drivers, Same thing nothing new happens.
Why and When does the S/W upgrade Please wait while upgrading screen appears. I think I can install another OS or make a Hard reset on the Phone if i can get the PC to Detect it. Its not the Cable and its not the PC. Tried 3 diferent cables and 2 pcs and a Macbookpro. I live in mexico and im phone company its TELCEL if that helps.
It appears as soon as i turn on the phone.
PD: please if you know what im dealing with , write the answer for dumb people like me, its hard to know what you are talking about when using names like ST, KDZ and stuff and english its not my mother languaje so dumb it for me. THX!

You must read this.
And you need the bin and fls from KDZ to extract and root your device(if you want it rooted). Since here you should look for yourself.
A soft reset is keep pushing Vol+ + Power for 5 secs.

Mexickano said:
You must read this.
And you need the bin and fls from KDZ to extract and root your device(if you want it rooted). Since here you should look for yourself.
A soft reset is keep pushing Vol+ + Power for 5 secs.
Click to expand...
Click to collapse
That wont Work, I already tried the SF, and it wont detect the Phone, Theres no Comunication Driver.

chulex67 said:
That wont Work, I already tried the SF, and it wont detect the Phone, Theres no Comunication Driver.
Click to expand...
Click to collapse
Ok, the phone was rooted?, Did you tried the soft reset?, Have you removed the battery and turn it off by 5 mins.(not necessary 5 mins but just an aproximate)?

Mexickano said:
Ok, the phone was rooted?, Did you tried the soft reset?, Have you removed the battery and turn it off by 5 mins.(not necessary 5 mins but just an aproximate)?
Click to expand...
Click to collapse
I think the phone was rooted i really dont know i think they were trying to update the system. I tried the Soft Reset Nothing happens, I think its not charging anymore it will only turn on when i connect the Usb cable. I tried removing the battery for 10 mins and tried again all steps. My Problem its that the pc Detects that theres an Usb, but it wont recognize it.
After i plug in the usb cable to the phone and i disconect it, it will remain with S/W upgrade screen for a few seconds before turning itself off. I cant turn it on by the power button.

chulex67 said:
I think the phone was rooted i really dont know i think they were trying to update the system. I tried the Soft Reset Nothing happens, I think its not charging anymore it will only turn on when i connect the Usb cable. I tried removing the battery for 10 mins and tried again all steps. My Problem its that the pc Detects that theres an Usb, but it wont recognize it.
After i plug in the usb cable to the phone and i disconect it, it will remain with S/W upgrade screen for a few seconds before turning itself off. I cant turn it on by the power button.
Click to expand...
Click to collapse
And sft does not work? Eventhough your phone is in SW mode already?
Sent from my LG-P760 using xda app-developers app

N00BY0815 said:
And sft does not work? Eventhough your phone is in SW mode already?
Sent from my LG-P760 using xda app-developers app
Click to expand...
Click to collapse
Yeah, I mean, the only freaking thing that wont work its that my pc and laptop detect when i connect the Cable to the phone, but it Wont Recognize The Usb and when i enter the SFT theres no Communication Driver. Like i said i have downloaded old and new ones Usb Drivers for the LG but it still wont detect it.

chulex67 said:
Yeah, I mean, the only freaking thing that wont work its that my pc and laptop detect when i connect the Cable to the phone, but it Wont Recognize The Usb and when i enter the SFT theres no Communication Driver. Like i said i have downloaded old and new ones Usb Drivers for the LG but it still wont detect it.
Click to expand...
Click to collapse
And if you connect it to the PC normally?
Does your device manager show nothing at all, or does it maybe show unknown devices and you only have to install the drivers manually?
Sent from my LG-P760 using xda app-developers app

N00BY0815 said:
And if you connect it to the PC normally?
Does your device manager show nothing at all, or does it maybe show unknown devices and you only have to install the drivers manually?
Sent from my LG-P760 using xda app-developers app
Click to expand...
Click to collapse
I had similar Problem when using a 64bit-os. if so, try to reboot with disabled check for Driver-signature.
Just press F8 during bootup. if you get a promt fo selecting boot-device, press enter and quickly hit F8 again.
when System is booted remove the Batterie, press and hold vol+ and connect to usb (Batterie is still removed)
now my OB was detected with S/W Upgrade Mode

N00BY0815 said:
And if you connect it to the PC normally?
Does your device manager show nothing at all, or does it maybe show unknown devices and you only have to install the drivers manually?
Sent from my LG-P760 using xda app-developers app
Click to expand...
Click to collapse
It says Usb Device Not Recognized, Unknown Device, One of the Usb Devices has Malfunctioned and Windows Does not Recognize it.
I have tried to Install Usb Drivers and everything and The pc Still Recognize the Phone. The SFT has no comunication Device because the pc its not recognizing the usb so i cant do ****. xD

Z3Rr0_C0ol said:
I had similar Problem when using a 64bit-os. if so, try to reboot with disabled check for Driver-signature.
Just press F8 during bootup. if you get a promt fo selecting boot-device, press enter and quickly hit F8 again.
when System is booted remove the Batterie, press and hold vol+ and connect to usb (Batterie is still removed)
now my OB was detected with S/W Upgrade Mode
Click to expand...
Click to collapse
Nope, Didnt work i even uninstalled the Drivers and Reinstalled both old and new usb drivers for the phone and rebooted each time to see if it worked. Same problem. Dont know if this is important but the S/W update screen appears without pressing the Vol+ or Vol - or both.

chulex67 said:
Nope, Didnt work i even uninstalled the Drivers and Reinstalled both old and new usb drivers for the phone and rebooted each time to see if it worked. ...
Click to expand...
Click to collapse
Are You sure you disabled Driver Signature Enforcement.
this must be done every reboot you do or your phone will not be recognized in S/W Upgrade Mode. After flashing with SFT it is not needed. Only for flashing in S/W Upgrade Mode.

The currently available drivers work fine with x64...
I never used SFT on x86, and I never had a problem. I didn't even need to disable driver's signature enforcement, ever.
What's weird here is that his phone boots in to S/W upgrade mode without any key press. It seems to me that now you got there a flashlight...lol

Can't flash TWRP

Hi. I decided to flash my Honor 3c with Cyanogenmod 12.1. My problem is that i need TWRP (now I have CWM) but i can't flash it to my device. I try to do it by SP Flash Tool, but after i connect my turned off device, I get this error:
BROM ERROR : S_BROM_DOWNLOAD_DA_FAIL (0x7D4)
[H/W] Fail to download DA to baseband chip's internal SRAM!
[HINT]: 1. There's an cable communication problem between FlashTool and BootROM. 2. Target might be shutdown unexpectedly or target lost power supply.
[ACTION] 1. Try again. 2. Proceed H/W checking in download cable and target side com port. 3. Monitor if power-drop occured in target side.
Click to expand...
Click to collapse
Where is the problem? I've tried with 2 different cables and 2 different computers

Ceranzuo said:
Hi. I decided to flash my Honor 3c with Cyanogenmod 12.1. My problem is that i need TWRP (now I have CWM) but i can't flash it to my device. I try to do it by SP Flash Tool, but after i connect my turned off device, I get this error:
BROM ERROR : S_BROM_DOWNLOAD_DA_FAIL (0x7D4)
[H/W] Fail to download DA to baseband chip's internal SRAM!
[HINT]: 1. There's an cable communication problem between FlashTool and BootROM. 2. Target might be shutdown unexpectedly or target lost power supply.
[ACTION] 1. Try again. 2. Proceed H/W checking in download cable and target side com port. 3. Monitor if power-drop occured in target side.
Where is the problem? I've tried with 2 different cables and 2 different computers
Click to expand...
Click to collapse
Is your phone in bootloader mode? Hold Vol down+power to enter fastboot mode and then connect your phone to PC.
If you are already doing that or the problem still persists and have an unlocked bootloader(which I am sure you have), try to flash twrp manually.

muradulislam said:
Is your phone in bootloader mode? Hold Vol down+power to enter fastboot mode and then connect your phone to PC.
Click to expand...
Click to collapse
When I do it, my phone just turns on normally.
How can I check if I have unlocked bootloader? I have unlocked it about 1 year ago, but I did full wipe yesterday.

Ceranzuo said:
When I do it, my phone just turns on normally.
How can I check if I have unlocked bootloader? I have unlocked it about 1 year ago, but I did full wipe yesterday.
Click to expand...
Click to collapse
Vol down+power should boot into fastboot. Turn off the phone, hold both until honor logo shows up, let go of power but hold vol down for about 5 sec more.
If still the same, Turn off your phone, connect USB cable to phone, hold Vol down and connect the cable to computer. It should boot into bootloader now.
If it can not boot into bootloader still, the last is to try adb but that is a bit lengthy.
In bootloader mode, it will be written on phone screen in red whether phone is locked, unlocked or relocked.
Wipe does not effect bootloader status so it's still unlocked imo.

muradulislam said:
If still the same, Turn off your phone, connect USB cable to phone, hold Vol down and connect the cable to computer. It should boot into bootloader now.
Click to expand...
Click to collapse
After this, I got this text on my screen:
FASTBOOT&RESCUE MODE
Please connect usb cable to your computer and open hisuite
Click to expand...
Click to collapse

Ceranzuo said:
After this, I got this text on my screen:
FASTBOOT&RESCUE MODE
Please connect usb cable to your computer and open hisuite
Click to expand...
Click to collapse
It did not say anything about phone unlocked in red?

muradulislam said:
It did not say anything about phone unlocked in red?
Click to expand...
Click to collapse
Nope. Maybe I was wrong and I have never unlocked it? I don't remember, but I did something when I was upgrading my phone to Android 4.4.2

Ceranzuo said:
Nope. Maybe I was wrong and I have never unlocked it? I don't remember, but I did something when I was upgrading my phone to Android 4.4.2
Click to expand...
Click to collapse
At least it should say, phone locked. Saying nothing is a phenomenon i never heard before but I usually go for newer versions. May be that's the case.
Anyways use adb to fire this command
Fastboot OEM device-info
To be sure if its locked or not.
To setup adb, download and install latest Android SDK, run the program and only download platform-tools.
Your phone is international variant and it came with locked bootloader, I am sure sp tools unlocked it coz otherwise CWM could not be flashed.
Right click platform-tools folder and select run command prompt window here and type the above command
If the bootloader is unlocked (it will tell you if it is), copy the twrp image to platform-tools folder and rename it to twrp.img and fire this command
Fastboot flash recovery twrp.img
And try to reboot into recovery after disconnecting from pc and simultaneously holding power+ Vol up.

edit: nevermind, i forghot about something...

muradulislam said:
If the bootloader is unlocked (it will tell you if it is), copy the twrp image to platform-tools folder and rename it to twrp.img and fire this command
Fastboot flash recovery twrp.img
Click to expand...
Click to collapse
Should I do this when my phone is switched off?

Ceranzuo said:
Should I do this when my phone is connected to pc or not? Switched off?
Click to expand...
Click to collapse
When your phone is connected to your pc in fastboot mode.
Lemme know how did it go, will reply back in the morning. Hope everything works fine for you.
Sent from my PLK-L01 using XDA Labs

muradulislam said:
When your phone is connected to your pc in fastboot mode.
Sent from my PLK-L01 using XDA Labs
Click to expand...
Click to collapse
Ok, after I typed this command, there appeared this message in window:
<waiting for any device>
Click to expand...
Click to collapse
after this I reboot into recovery mode, but there is still CWM, not TWRP

Ceranzuo said:
Ok, after I typed this command, there appeared this message in window:
<waiting for any device>
after this I reboot into recovery mode, but there is still CWM, not TWRP
Click to expand...
Click to collapse
You dont have your phone drivers installed. Google Huawei USB drivers and install them or use hisuite to install drivers for your phone.
After driver installation, do the same process again.
My bad. I assumed you would have drivers already installed
Sent from my PLK-L01 using XDA Labs

muradulislam said:
You dont have your phone drivers installed. Google Huawei USB drivers and install them or use hisuite to install drivers for your phone.
After driver installation, do the same process again.
My bad. I assumed you would have drivers already installed
Sent from my PLK-L01 using XDA Labs
Click to expand...
Click to collapse
I have already installed many drivers from different sites. I will try with hisuite

Ceranzuo said:
I have already installed many drivers from different sites. I will try with hisuite
Click to expand...
Click to collapse
Hisuite is the best option. Even if that does not work (there is a chance of that), Google Kouch's universal drivers and install those.
May have to manually install dribers if nothing works.
Lemme know how did it go. Will get back to you in the morning if nobody else came along (but someone surely will before that).
Have a nice day/night depending on your time zone
Sent from my PLK-L01 using XDA Labs
---------- Post added at 07:41 PM ---------- Previous post was at 07:31 PM ----------
Lemme get my teacher for you
@DigiGoon
Sent from my PLK-L01 using XDA Labs

I installed Hisuite and connected my phone. Windows have downloaded drivers automatically. And still the same...
But I forgot to tell you that when I connecting my switched off phone, my pc says "USB Device Not Recognized" (or something like that, I dont have english version of windows). Everything is ok when my phone is switched on...
This phone is cursed. I try to give up and stay on my current ROM, so I installed Nova Launcher, but setting it as default doesn't work :/
Thanks for trying to help me anyway.

Ceranzuo said:
I installed Hisuite and connected my phone. Windows have downloaded drivers automatically. And still the same...
But I forgot to tell you that when I connecting my switched off phone, my pc says "USB Device Not Recognized" (or something like that, I dont have english version of windows). Everything is ok when my phone is switched on...
This phone is cursed. I try to give up and stay on my current ROM, so I installed Nova Launcher, but setting it as default doesn't work :/
Thanks for trying to help me anyway.
Click to expand...
Click to collapse
I was awake just for your post. I think I got the problem. You need fastboot drivers imo but I would have to read a bit before I can suggest how to go about it.
Am busy tomorrow but will try to get back to you in the evening (GMT+5 time zone).
Can never be 100% sure but still I am confident, your problem has a solution. Just bear with me a day or two
Sent from my PLK-L01 using XDA Labs

Ceranzuo said:
I installed Hisuite and connected my phone. Windows have downloaded drivers automatically. And still the same...
But I forgot to tell you that when I connecting my switched off phone, my pc says "USB Device Not Recognized" (or something like that, I dont have english version of windows). Everything is ok when my phone is switched on...
This phone is cursed. I try to give up and stay on my current ROM, so I installed Nova Launcher, but setting it as default doesn't work :/
Thanks for trying to help me anyway.
Click to expand...
Click to collapse
Boot into recovery mode, no matter on which recovery are you on, and execute this command:
Code:
adb devices
And see the output, if it says something like:
Code:
**some_number** recovery
then it means there is no problem in the detection of your device by PC, if it does not, then check if the micro USB socket in the device is in good condition.
And I must ask: Are you able to do any operations on device via PC after connecting it?

DigiGoon said:
Boot into recovery mode, no matter on which recovery are you on, and execute this command:
Code:
adb devices
And see the output, if it says something like:
Code:
**some_number** recovery
then it means there is no problem in the detection of your device by PC, if it does not, then check if the micro USB socket in the device is in good condition.
Click to expand...
Click to collapse
I did it and it says some number and recovery
DigiGoon said:
And I must ask: Are you able to do any operations on device via PC after connecting it?
Click to expand...
Click to collapse
In "usb storage media" or something like that? Yes, I do.

Ceranzuo said:
I did it and it says some number and recovery
Click to expand...
Click to collapse
Okay, then it means that there is no problem in the connection. You are using SP Flash tool in which mode?
Sent from my PLK-L01 using Tapatalk

Nexus 6 wont detect MTP USB but charges fine

Anyone with the same issue ? I am stuck at the bootloader since I wiped out my system image I can get to the recovery but I don't have a way to transfer new ROM since phone wont detect USB (MTP).
I didn't have any image backed to restore to. Tried OTG cable/USB nothing worked
What are my options ?

rocco24 said:
Anyone with the same issue ? I am stuck at the bootloader since I wiped out my system image I can get to the recovery but I don't have a way to transfer new ROM since phone wont detect USB (MTP).
I didn't have any image backed to restore to. Tried OTG cable/USB nothing worked
What are my options ?
Click to expand...
Click to collapse
Hi... Is data mounted and MTP enabled in TWRP?
Is your phone detected while in bootloader?
Try: fastboot devices
If phone is recognized, download stock firmware of your choice and flash it...

5.1 said:
Hi... Is data mounted and MTP enabled in TWRP?
Is your phone detected while in bootloader?
Try: fastboot devices
If phone is recognized, download stock firmware of your choice and flash it...
Click to expand...
Click to collapse
MTP is enabled but phone is not detected at all
I can access the terminal in recovery mode but it doesn't support ftp command to download any firmware.
I guess I am doomed

rocco24 said:
MTP is enabled but phone is not detected at all
I can access the terminal in recovery mode but it doesn't support ftp command to download any firmware.
I guess I am doomed
Click to expand...
Click to collapse
Wait... I don't get it...
Are you stuck in recovery? Or bootloader?
Also you can't use ftp commands either in bootloader or recovery... I suggest you start by reading this thread to learn a few basics about Android commands and how-to :
https://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928

5.1 said:
Wait... I don't get it...
Are you stuck in recovery? Or bootloader?
Also you can't use ftp commands either in bootloader or recovery... I suggest you start by reading this thread to learn a few basics about Android commands and how-to :
https://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928
Click to expand...
Click to collapse
Sorry to confuse you I can get to the bootloader and the recovery no problem but when I try to reboot to the system it kept saying no OS installed. I don't have any ROM installed and I can't use USB cable since phone won't detect it. So I am stuck at back-end.

rocco24 said:
Sorry to confuse you I can get to the bootloader and the recovery no problem but when I try to reboot to the system it kept saying no OS installed. I don't have any ROM installed and I can't use USB cable since phone won't detect it. So I am stuck at back-end.
Click to expand...
Click to collapse
So...
What operating system is installed on your computer?
Did you already install adb/fastboot drivers?
In device manager, while being in bootloader, is your phone detected when you plug your USB cable?
Did you try different cables, USB ports?

5.1 said:
So...
What operating system is installed on your computer?
Did you already install adb/fastboot drivers?
In device manager, while being in bootloader, is your phone detected when you plug your USB cable?
Did you try different cables, USB ports?
Click to expand...
Click to collapse
I tried different cables/PCs nothing worked. I think my phone USB port is defected but what confuses me more is that it can be charged just fine but no USB connectivity
It is still under warranty but not sure if it will be honored since I have the bootloader unlocked.

rocco24 said:
Sorry to confuse you I can get to the bootloader and the recovery no problem but when I try to reboot to the system it kept saying no OS installed. I don't have any ROM installed and I can't use USB cable since phone won't detect it. So I am stuck at back-end.
Click to expand...
Click to collapse
Nothing happens in device manager when.you plug your phone? Even not recognized as an unknown device?

5.1 said:
Nothing happens in device manager when.you plug your phone? Even not recognized as an unknown device?
Click to expand...
Click to collapse
Nothing like said it is dead. I have another nexus 6 can connect easily to the PC I am pretty sure it is a phone issue.

Well, if you're 100℅ sure the USB port is damaged, there's nothing else than a repair that could bring your phone back to life... Good luck..!

5.1 said:
Well, if you're 100℅ sure the USB port is damaged, there's nothing else than a repair that could bring your phone back to life... Good luck..!
Click to expand...
Click to collapse
thanks for your time and help.

So the nexus 6 gets old now, may just check to clean your port

coremania said:
So the nexus 6 gets old now, may just check to clean your port
Click to expand...
Click to collapse
Tried that already it didn't work

Might be a driver problem.
Connect it your windows pc and check the Device Manager if it is detected as "Android" device. If so uninstall it and disconnect and reconnect it to the pc. Let windows install the MTP drivers.

aliinbox said:
Might be a driver problem.
Connect it your windows pc and check the Device Manager if it is detected as "Android" device. If so uninstall it and disconnect and reconnect it to the pc. Let windows install the MTP drivers.
Click to expand...
Click to collapse
This has already been discussed if you read the "few" previous posts ... Device isn't detected at all...

Question Phone in fastboot mode not recognised

Since I flashed my Mi 11 ultra from CN to EEA version Rom, it is not recognised by Windows 10 laptop when in fastboot mode.
Its the same Win 10 laptop which I used to flash the phone, so all the drivers are still installed.

You have to turn USB Debugging on again in developer settings

Done that. I've done everything. It just doesn't get recognised. No little chime when I plug it in, nothing. It works in normal mode, but not fastboot.

message me privately and i can help you through zoom/teamviewer

saisannihith said:
message me privately and i can help you through zoom/teamviewer
Click to expand...
Click to collapse
there is a hardware fault on my phone. usb debugging is enabled. when in plug in phone in fastboot mode, it doesn't even show in device manager. nothing. this screenshot is taken with the phone plugged in in fastboot mode. As you can see, it doesn't show at all.

spikemann007 said:
there is a hardware fault on my phone. usb debugging is enabled. when in plug in phone in fastboot mode, it doesn't even show in device manager. nothing. this screenshot is taken with the phone plugged in in fastboot mode. As you can see, it doesn't show at all.
Click to expand...
Click to collapse
I cant tell you anything until i see it.

Weird, I attached a screenshot before. Here I try again.

put cellphone in fastboot download and install file here's download link https://ufile.io/1xc7dudc

thephonetechdoc said:
put cellphone in fastboot download and install file here's download link https://ufile.io/1xc7dudc
Click to expand...
Click to collapse
I already installed that same file before. No difference. doesn't even show in devive manager. I give up.

Bro not like this. Iam asking if i can connect remotely to your PC to diagnose the drivers.

Unusual xiaomi drivers and adb devices and reinstall

Have a look and try out the method mentioned in the video. Did the trick for me

I did all of it. I don't even get that little chime that lets you know when you plug the phone in. Silence.
It works fine in normal mode.

Hi @spikemann007 !
I had the same issue.
Root cause was (for me) the USB cable. Have you already tried a alternative?
best regards!