Related
sorry my english, I'm brazilian ... installed the rom: Stock odexed and rooted XXLS2, FULLY WORKING ... as tutorial ... but when you start the rom asks: Enter code lock control network ... some solution? I fleshear any rom and still asks for: Enter code lock control network
rafaelrocha.ds said:
sorry my english, I'm brazilian ... installed the rom: Stock odexed and rooted XXLS2, FULLY WORKING ... as tutorial ... but when you start the rom asks: Enter code lock control network ... some solution? I fleshear any rom and still asks for: Enter code lock control network
Click to expand...
Click to collapse
Check the below thread. All credits to Dr Ketan
http://forum.xda-developers.com/show....php?t=1801341 (Link updated to note 1. previously it was Note 2) Thanks Ketan for pointing.,
Tool no 18
heavenhated said:
Check the below thread. All credits to Dr Ketan
http://forum.xda-developers.com/showpost.php?p=31801134&postcount=4
Tool no 18
Click to expand...
Click to collapse
You have linked to Note2 toolbox, anyway Note 1 have different issue and may simply SW unlock tool may not work
Here is toolbox for note1
http://forum.xda-developers.com/showthread.php?t=1801341
tool no 18 (if you have flashed latest ROM)
older ROM may get unlocked by Tool 17 .
dr.ketan said:
You have linked to Note2 toolbox, anyway Note 1 have different issue and may simply SW unlock tool may not work
Here is toolbox for note1
http://forum.xda-developers.com/showthread.php?t=1801341
tool no 18 (if you have flashed latest ROM)
older ROM may get unlocked by Tool 17 .
Click to expand...
Click to collapse
Thanks Ketan for correcting it.
dr.ketan said:
You have linked to Note2 toolbox, anyway Note 1 have different issue and may simply SW unlock tool may not work
Here is toolbox for note1
http://forum.xda-developers.com/showthread.php?t=1801341
tool no 18 (if you have flashed latest ROM)
older ROM may get unlocked by Tool 17 .
Click to expand...
Click to collapse
but in official rom 4.1.1 ... it does not work ... some solution?
So you flashed criskelo's fix and then used Galaxy_S_Unlock by herloz and it didn't work? Are you sure you did this step by step? I have also self-lock problem and this works on ICS but I'm scared to try this on JB... I hope that soon there will be a fix for Galaxy_S_Unlock app for JB too
kokodv said:
So you flashed criskelo's fix and then used Galaxy_S_Unlock by herloz and it didn't work? Are you sure you did this step by step? I have also self-lock problem and this works on ICS but I'm scared to try this on JB... I hope that soon there will be a fix for Galaxy_S_Unlock app for JB too
Click to expand...
Click to collapse
ics rom works .. jb rom does not work!
I'm really upset right now So that means that maybe I can't run JB rom? Is there information for a fix? Any news about that are welcome for me!
Hi Guys, Can we port the Galaxy mini custom ROM on Galaxy Pop..or is there any hardware restriction?
gunjarya said:
Hi Guys, Can we port the Galaxy mini custom ROM on Galaxy Pop..or is there any hardware restriction?
Click to expand...
Click to collapse
Galaxy mini = galaxy pop (no need to port)
Galaxy mini ≠ galaxy pop plus (need port)
Galaxy pop = gt–s5570
Galaxy pop plus = gt–s5570i
gunjarya said:
Hi Guys, Can we port the Galaxy mini custom ROM on Galaxy Pop..or is there any hardware restriction?
Click to expand...
Click to collapse
Pop is the name of Mini on Asia, sometimes India People call that.
Here's listing of Mini name you will heard :
1. Mini = Europe, America
2. Next= Italian, some Europe people, and Spain
3. Pro = Indonesia
4. Pop = India, Asia generally
Thanks for those encouraging comments. I am having a very weird issue in porting custom rom on my Galaxy pop..i have rooted it(checked root access with rom explorer/titanium backup), also updated binary, installed CWM recovery 5.0.2.6 , but still when installing custom rom CM7.2, it gets stuck in the first screen..where Android is written..i tried everytime with full wipe..i have been told unlocking bootloader is not required here..not sure what else should I try..anyhelp would be greatly appreciated
Sent from my U20i using xda app-developers app
gunjarya said:
Thanks for those encouraging comments. I am having a very weird issue in porting custom rom on my Galaxy pop..i have rooted it(checked root access with rom explorer/titanium backup), also updated binary, installed CWM recovery 5.0.2.6 , but still when installing custom rom CM7.2, it gets stuck in the first screen..where Android is written..i tried everytime with full wipe..i have been told unlocking bootloader is not required here..not sure what else should I try..anyhelp would be greatly appreciated
Sent from my U20i using xda app-developers app
Click to expand...
Click to collapse
Upgrade your recovery. Use RZ Recovery or CWM 5.0.2.8.
BTW, you should wait atleast 5-10 minutes in Android screen.
I waited for almost 15 mins..3-4 times after flashing rom. I'll try now upgrading recovery..
Sent from my U20i using xda app-developers app
Wipe data
Flash rom
Wipe data
gunjarya said:
I waited for almost 15 mins..3-4 times after flashing rom. I'll try now upgrading recovery..
Sent from my U20i using xda app-developers app
Click to expand...
Click to collapse
OK !
F4uzan said:
OK !
Click to expand...
Click to collapse
upgrading recovery to Rz helped..installed and couple of ROMs and tested and found the New experience V6 very nice to go with for couple of days..Avijit's Jelly Bean also looks very attractive but that looks to me meant for Mini+ and would not like to brick my wife's mini flashing that
gunjarya said:
upgrading recovery to Rz helped..installed and couple of ROMs and tested and found the New experience V6 very nice to go with for couple of days..Avijit's Jelly Bean also looks very attractive but that looks to me meant for Mini+ and would not like to brick my wife's mini flashing that
Click to expand...
Click to collapse
Jellyblast is for Mini+. Never try it on your Mini ok ?
Galaxy Pop=Galaxy Mini
Boooooooo!.....did I scared you?
Is their anyone who can root my vivo 1801 device
Hi guys,
just finished building TWRP 3.0.2-0 for the Z5
Download
TWRP-for-CM (folder)
recovery_3.0.2.img (fastboot flashable file)
Source:
https://github.com/omnirom/android_bootable_recovery (TWRP, recovery - place in bootable/recovery-twrp)
https://github.com/CyanogenMod (CyanogenMod source)
https://github.com/Sony-Kitakami (place in .repo/local_manifests )
Build:
Code:
source build/envsetup.sh
lunch cm_sumire-userdebug
mka clobber && mka recoveryimage RECOVERY_VARIANT=twrp
Thanks to @moonbutt74 for bearing with me and all my questions :silly:
Not Working on E6633 , When I power on the device , Sony logo show and the device power off immediately
Edit :
It works Successfully , I had flashed It as a kernel hahaha
Thank You ^_^
Hello,
I've had the same issue than Sony guy (the device which power off after few seconds on the Sony logo), but I've had correctly flashed this recovery... I don't understand
Any idea ? I have also an E6633.
Thx
Sh4douw said:
Hello,
I've had the same issue than Sony guy (the device which power off after few seconds on the Sony logo), but I've had correctly flashed this recovery... I don't understand
Any idea ? I have also an E6633.
Thx
Click to expand...
Click to collapse
How did you flashed ? As kernel or as recovery ?
If as kernel you will have this problem . But as recovery it will work successfully
Sony guy said:
How did you flashed ? As kernel or as recovery ?
If as kernel you will have this problem . But as recovery it will work successfully
Click to expand...
Click to collapse
Sorry, I misspoke xD
I flashed it as a recovery btw.
But, by "it works Successfully", what did you mean ? You can access on the recovery or you can boot on CM13 ?
Indeed, my device power off not after the flash of the kernel and the recovery, but AFTER the flash of the CM13 + GApps.
So, if by "success" you meant that you can boot totally on CM13, which ROM and which kernel did you flashed ?
But if it concerned the recovery only, this is good, I have the same result than you x)
Sh4douw said:
Sorry, I misspoke xD
I flashed it as a recovery btw.
But, by "it works Successfully", what did you mean ? You can access on the recovery or you can boot on CM13 ?
Indeed, my device power off not after the flash of the kernel and the recovery, but AFTER the flash of the CM13 + GApps.
So, if by "success" you meant that you can boot totally on CM13, which ROM and which kernel did you flashed ?
But if it concerned the recovery only, this is good, I have the same result than you x)
Click to expand...
Click to collapse
Yeah I can boot into cm13
I used cm13 rom , cm kernel and this recovery
I flash GAPPS after the rom and I get setup wizard FC
so I did factory reset and then it works fine without problem
Sony guy said:
Yeah I can boot into cm13
I used cm13 rom , cm kernel and this recovery
I flash GAPPS after the rom and I get setup wizard FC
so I did factory reset and then it works fine without problem
Click to expand...
Click to collapse
Oh, I see
Do you can link me which kernel and which ROM did you use ?
Also, what pack of GApps did you use ?
Sorry, it's the first time I try to flash a custom ROM, I'm little lost as you could see xD
Sh4douw said:
Oh, I see
Do you can link me which kernel and which ROM did you use ?
Also, what pack of GApps did you use ?
Sorry, it's the first time I try to flash a custom ROM, I'm little lost as you could see xD
Click to expand...
Click to collapse
Click here to download the rom
http://forum.xda-developers.com/xperia-z5/development/rom-cyanogenmod-13-sony-xperia-z5-t3356163/page11
And Gapps you can find it in the first page of the above thread
Okay, I don't understand why, but for booting on CM, I had to reflash the kernel !
Without it, my device power off one second after the Sony logo
It finally works, thanks you
Hi,
Are you able to make one for the Z5P??
some of us are still stuck at ver 2.8.
also, i have used your root kernel program with the lastest twrp and it can boot into recovery,since i am using a custom kernel, i think it will be nice if there is a flashable img file for the latest twrp.
Many thanks in advance.
Will this work with my new Z5, Android 6.0.1, totally stock?
Nayibmc said:
Will this work with my new Z5, Android 6.0.1, totally stock?
Click to expand...
Click to collapse
No. Just Cm/Aosp
Sent from my Xperia Z5 using XDA-Developers mobile app
How can amplify the sound in Bluetooth?
Sergeyra29 said:
How can amplify the sound in Bluetooth?
Click to expand...
Click to collapse
Faux sound setting in Kernel Adiutor is not working(im on Z5 RR latest build plus Zach's kernel), but it working on Romaur 4.2.0 plus Aur-kernel 4.0.
try "FauxSound app v1.5" from play store, its worked with wired headset, maybe worked with Bluetooth too.
Sent from my Xperia Z5 using XDA-Developers mobile app
How can amplify the sound in Bluetooth mixer_paths?
Sorry wrong reply. XD
Sony guy said:
How did you flashed ? As kernel or as recovery ?
If as kernel you will have this problem . But as recovery it will work successfully
Click to expand...
Click to collapse
I have questions:
1. How to install/flash as recovery? via adb fastboot?
2. Will this work on stock rom? if yes, what firmware?
Thank you
adize said:
I have questions:
1. How to install/flash as recovery? via adb fastboot?
2. Will this work on stock rom? if yes, what firmware?
Thank you
Click to expand...
Click to collapse
1 - fastboot flash recovery x.img
2 - I think this recovery is for CM ROM
You can search in the android development section for stock ROM , it works on all firmwares
Hi guys, noob question here: I have twrp old version, can I flash this in recovery?
And also I want to try the xz rom but tried flashing and didn't work, it is my understanding that it was caused by the old twrp and using this I'll be able to use that rom.
Thank you for your help.
Sent from my E6653 using XDA-Developers mobile app
[emoji41]
oh, sorry, wrong thread
Fastest ROM
Credits:Samsung Galaxy Note 10.1 - Samsung Electronics
Firmware: TouchWiz - Samsung Electronics
Android 4.4.2 - Google Inc.
Requirements:twrp-3.0.2-0-n801x.img
Download:https://www.androidfilehost.com/?w=files&flid=282751
- Secretwolf98
Not able to log in to wifi. Any ideas that can help me. Thanks.
wicho71 said:
Not able to log in to wifi. Any ideas that can help me. Thanks.
Click to expand...
Click to collapse
Flash this file in the recovery.
Revived my N8013, works great! Mirroring Fix Zip
Deleted everything on the Internal Storage and EXT-SD and flashed this ROM with the WiFi-fix. Very usable. Have been through all the other Custom Roms - this one works without lags and freezes.
Please add this zip to fix mirroring (Yes, works with FireStick) :
https://forum.xda-developers.com/attachment.php?attachmentid=2784504&d=1402087218
GT-N8000?
I was wondering if this ROM works with GT-N8000. I'm own a N8000 and I'm looking for the fastest ROM for the device. Thank you for any responses in advance
nsian001 said:
I was wondering if this ROM works with GT-N8000. I'm own a N8000 and I'm looking for the fastest ROM for the device. Thank you for any responses in advance
Click to expand...
Click to collapse
Were you able to try the ROM yet? I have the N8000 too, and Lineage just isn't working out well for me, so I'm looking for a stable build, and hoping this is it [emoji16]
Sent from my MAR-LX1M using Tapatalk
While flashing with twrp it is saying unable to mount system. My device is n8000
uzumakivishal96 said:
While flashing with twrp it is saying unable to mount system. My device is n8000
Click to expand...
Click to collapse
Need to use the TWRP 3.0.2 provided, I used a version of 3.2 would have the issue.
mkcs said:
Need to use the TWRP 3.0.2 provided, I used a version of 3.2 would have the issue.
Click to expand...
Click to collapse
Oh, when I re-flashed the rom again, the same problem arised even though the twrp is 3.0.2. After several trials, I found that the solution was to REBOOT to recovery after wiping your old system. Then, it could successfully be installed.
I found that the tablet cannot charge in power off mode. Even though I shutdown my tablet during charging, it automatically reboots. Any reason for this?
mkcs said:
I found that the tablet cannot charge in power off mode. Even though I shutdown my tablet during charging, it automatically reboots. Any reason for this?
Click to expand...
Click to collapse
Mine is N8000 as well. I could flash the rom with TWRP3.2 and I still can charge when tablet is power off.
Thanks for this.
I was having problems on the newer roms and went back to basics. All seems well.
I was also happy to see the Boeffla kernel inside. Any chance you have the final version of the Boeffla app? (now that his website is finished?)
Much appreciated!
Flashed on N8000 running Philz_touch_6.48.4-n8000. So far so good. WiFi working. Much more snappier vs AndroidRevolution 21 and LineageOS. Glad i stumbled upon this post.
androidfilehost isn't getting any mirrors :angel:
thanks for this beaut. Revived my note 10.1 n8000 (got a close error glitch on touchwiz but it only needs to wipe after flash rom). only problem is, this is an n8013 rom - coming from a WiFi only tablet, it isn't capable of making calls or sending SMS. But this is one of the fastest rom I have tried (only if you don't mind using an old stock gnote 10.1 rom)
Hello !
I have a samsung galaxy s3 gt-i9305 (not root). It was under android 4.4.3. So, i decided to upgrade it. I choose to put him to lineage os 18.0 (exactly : lineage-18.0-20201020-UNOFFICIAL-i9300.zip).
Installation throught twrp works perfectly. But i'm confronted to some issues :
- button don't work (but not really horrible, i change gesture parameter)
- sim isn't detected
So, i try this solution : back to an older ROM where sim is detected, save efs+modem partition, flash phone with LA18.0, restore EFS+modem partition. And i try to root my phone.
But nothing work
Is anyone have an idea about how to solve this pb ?
kind regards !
SuperSP95
are you returned on stock rom?
haktug said:
are you returned on stock rom?
Click to expand...
Click to collapse
yes, i try these stock rom : "I9305XXUFOB2_I9305XEFFOB2_XEF.zip".
but it didn't work. after some times, it's freezing. and they are block messages.
and i don't really know what stock rom to choice
Super95SP said:
Hello !
I have a samsung galaxy s3 gt-i9305 (not root). It was under android 4.4.3. So, i decided to upgrade it. I choose to put him to lineage os 18.0 (exactly : lineage-18.0-20201020-UNOFFICIAL-i9300.zip).
kind regards !
SuperSP95
Click to expand...
Click to collapse
You mentioned that you have the S3 i9305 and flashed a rom for i9300?!? That won't work proper and with all functions, because many things are different with modem/mobile data and kernel for example.
rodman01 said:
You mentioned that you have the S3 i9305 and flashed a rom for i9300?!? That won't work proper and with all functions, because many things are different with modem/mobile data and kernel for example.
Click to expand...
Click to collapse
ah ok ! sorry for this nooby mistakes !