Related
I'm currently on 8.0.0 version and I want to downgrade to 7.1.1. I need help with the downgrade version
I've tried N950USQU2BQLA and N950USQU3BRA9 and both failed.
My carrier is TMOBILE
Your 8.0 bootloader version is 4. You are trying to downgrade to a lower version. You can't.
And next time please read and search. The phone is now 8 months old, plenty of info out there !
Sent from my Note 8 using XDA Labs
kennybon said:
I'm currently on 8.0.0 version and I want to downgrade to 7.1.1. I need help with the downgrade version
I've tried N950USQU2BQLA and N950USQU3BRA9 and both failed.
My carrier is TMOBILE
Click to expand...
Click to collapse
What is your current Firmware on your device?
i have downgraded from 8.0 to 7.1.1 with odin
gzimzzz said:
i have downgraded from 8.0 to 7.1.1 with odin
Click to expand...
Click to collapse
Ok. It depends on what firmware he is on. If he is on U4 oreo its impossible for him to downgrade
me2151 said:
Ok. It depends on what firmware he is on. If he is on U4 oreo its impossible for him to downgrade
Click to expand...
Click to collapse
If you don't mind me asking, why would it be impossible to downgrade if he's on U4? What would cause the process to be impossible?
Max_Terrible said:
If you don't mind me asking, why would it be impossible to downgrade if he's on U4? What would cause the process to be impossible?
Click to expand...
Click to collapse
What he wants is to downgrade to 7.1.1 which is possible if he is on u3(keep in mind i am referring to the bootloader version). On U4 there is ONLY 8.0. They did not release a 7.1.1 on U4 bootloader. Any time there is a major bootloader revision(such as u3 to u4 bootloader) Samsung blows a qfuse preventing older firmware from being installed(you can only flash firmware that is on the same incriment or newer) meaning if you are V1 bootlaoder you can flash either v1- v4 HOWEVER the moment you flash a higher version(if you go from v1 to v2) you are now stuck on v2 and higher and can no longer flash v1.
Based on the OPs provided information I assume he is on v4 bootloader because he is unable to flash v2 and v3 firmware. Because he is on the v4 bootloader he cannot flash 7.1.1 firmware which was last on U3. At this point his only option is to stick with U4 firmware(8.0 only).
me2151 said:
What he wants is to downgrade to 7.1.1 which is possible if he is on u3(keep in mind i am referring to the bootloader version). On U4 there is ONLY 8.0. They did not release a 7.1.1 on U4 bootloader. Any time there is a major bootloader revision(such as u3 to u4 bootloader) Samsung blows a qfuse preventing older firmware from being installed(you can only flash firmware that is on the same incriment or newer) meaning if you are V1 bootlaoder you can flash either v1- v4 HOWEVER the moment you flash a higher version(if you go from v1 to v2) you are now stuck on v2 and higher and can no longer flash v1.
Based on the OPs provided information I assume he is on v4 bootloader because he is unable to flash v2 and v3 firmware. Because he is on the v4 bootloader he cannot flash 7.1.1 firmware which was last on U3. At this point his only option is to stick with U4 firmware(8.0 only).
Click to expand...
Click to collapse
Thank you for explaining this to me. It makes sense.
EDIT: I Google'd how to check which bootloader you' re on, and actually found a bunch of articles that seems to explain what you just did, along with being unable to flash custom ROMs.
I need to go from 8.0 to 7.1.1 too
Hi guys I upgraded this evening from 7.1.1 bqk2 to 8.0 2cql1
It doesn't work correctly I keep getting a black screen and the phone vibrates.
The only way I've been able to fix is holding power volume up and bixby and wiping data/factory reset
Is there a link to a download for my software and a guide at all?
Forgive me for the stupid question I can't find any info out there online or a YouTube video
Thanks in advance
Joe
---------- Post added at 12:39 PM ---------- Previous post was at 12:29 PM ----------
Kingjucas said:
Hi guys I upgraded this evening from 7.1.1 bqk2 to 8.0 2cql1
It doesn't work correctly I keep getting a black screen and the phone vibrates.
The only way I've been able to fix is holding power volume up and bixby and wiping data/factory reset
Is there a link to a download for my software and a guide at all?
Forgive me for the stupid question I can't find any info out there online or a YouTube video
Thanks in advance
Joe
Click to expand...
Click to collapse
Just to add the reason I'm uninstalling is every time I update the always on display app it is then that I get the black screen and vibrations. Until then it is fine.
Kingjucas said:
Hi guys I upgraded this evening from 7.1.1 bqk2 to 8.0 2cql1
It doesn't work correctly I keep getting a black screen and the phone vibrates.
The only way I've been able to fix is holding power volume up and bixby and wiping data/factory reset
Is there a link to a download for my software and a guide at all?
Forgive me for the stupid question I can't find any info out there online or a YouTube video
Thanks in advance
Joe
---------- Post added at 12:39 PM ---------- Previous post was at 12:29 PM ----------
Just to add the reason I'm uninstalling is every time I update the always on display app it is then that I get the black screen and vibrations. Until then it is fine.
Click to expand...
Click to collapse
Maybe try a factory reset (backup first!), or install a fresh copy of the firmware using Odin. You can find the files for your device/model on Sammobile, and then download from there or through SamFirm.
hello everyone I'm the only one to this discussion to try to understand and maybe solve my problem, currently on the 8th note I android 8 (R16NW.N950FXXS5CSA1) updated by mistake with software sam firm
I wanted to go back to Android 7.1.1 I tried to insert firmware (N950FXXU3BRA8 base) but odin gives me a failed installation, reading here in the forum seems to be the fault of oreo samsung changed BL / CP making it impossible to go back, I tried but I did not found files needed for downgrade thanks to everyone for the answers
labello29 said:
hello everyone I'm the only one to this discussion to try to understand and maybe solve my problem, currently on the 8th note I android 8 (R16NW.N950FXXS5CSA1) updated by mistake with software sam firm
I wanted to go back to Android 7.1.1 I tried to insert firmware (N950FXXU3BRA8 base) but odin gives me a failed installation, reading here in the forum seems to be the fault of oreo samsung changed BL / CP making it impossible to go back, I tried but I did not found files needed for downgrade thanks to everyone for the answers
Click to expand...
Click to collapse
Sorry You can't downgrade to nougat because you are on bootloader version "5"! (From your firmware version you are on N950FXXUS"5"CSA1, the number in "" is your bootloader version). Nougat only went upto bootloader version 3.
The current bootloader won't allow it to be downgraded only upgraded to v6 and higher.
There is no files (that I know of) that will downgrade the bootloader. You'll might have better chance on talking to Samsung and see if they can downgrade your phone.
BluePhnx said:
Sorry You can't downgrade to nougat because you are on bootloader version "5"! (From your firmware version you are on N950FXXUS"5"CSA1, the number in "" is your bootloader version). Nougat only went upto bootloader version 3.
The current bootloader won't allow it to be downgraded only upgraded to v6 and higher.
There is no files (that I know of) that will downgrade the bootloader. You'll might have better chance on talking to Samsung and see if they can downgrade your phone.
Click to expand...
Click to collapse
so it was true that small article that I read on google that samsung stopped the downgrade ... damn therefore not proceeding gradually "4" up to the number "3"?
labello29 said:
so it was true that small article that I read on google that samsung stopped the downgrade ... damn therefore not proceeding gradually "4" up to the number "3"?
Click to expand...
Click to collapse
You can't downgrade the bootloader. Period. That actually why they change the bootloader version...to prevent you from downgrading.
I realized that my galaxy note 8 is not Italian but Europe on download mode me other carrier id
when I arrived for fear that it would not work in Italy I updated it with odin definitely wrong to bring it to android 8
Hi guys,
I want to know how to update to latest oreo update with all the security patches.
I am following this how-to thread https://forum.xda-developers.com/ga...w-to-install-android-oreo-snapdragon-t3716281 but in the OP the links are broken.
Can anyone update me on this?
The phone is from verizon but I didn't use it on verizon. I got this phone last November. Currently using on Cricket, so probably I don't get automatic updates from Verizon.
my note 8 info:
7.1.1
experience v. 8.5
security patch level Nov 1, 2017
Baseband v. N950USQS2BQK2
Thanks in advance.
bargaindeal said:
Hi guys,
I want to know how to update to latest oreo update with all the security patches.
I am following this how-to thread https://forum.xda-developers.com/ga...w-to-install-android-oreo-snapdragon-t3716281 but in the OP the links are broken.
Can anyone update me on this?
The phone is from verizon but I didn't use it on verizon. I got this phone last November. Currently using on Cricket, so probably I don't get automatic updates from Verizon.
my note 8 info:
7.1.1
experience v. 8.5
security patch level Nov 1, 2017
Baseband v. N950USQS2BQK2
Thanks in advance.
Click to expand...
Click to collapse
I am unsure if you should be on a much newer filmware or not. Sometimes a factory reset can resolve OTA not coming through, this will delete the phone memory though, so back up your data.
You can also get official filmware from sammobile and updato. Just if you want to flash Oreo with Odin, make sure you use the latest version of Odin (3.13.1)
stonedpsycho said:
I am unsure if you should be on a much newer filmware or not. Sometimes a factory reset can resolve OTA not coming through, this will delete the phone memory though, so back up your data.
You can also get official filmware from sammobile and updato. Just if you want to flash Oreo with Odin, make sure you use the latest version of Odin (3.13.1)
Click to expand...
Click to collapse
I am on Cricket and using Verizon note 8 that I got from last December. Last update was in November when I still have Verizon. After inserting Cricket sim card, there has never been an update anymore. I turned on Wifi and went into settings> software update to refresh, and there is no awaiting update. I didn't change to unlock firmware (as I do not know how). How do you go about installing the updates to latest Oreo using Odin? I am on 7.1.1 with build 2BQK2
bargaindeal said:
I am on Cricket and using Verizon note 8 that I got from last December. Last update was in November when I still have Verizon. After inserting Cricket sim card, there has never been an update anymore. I turned on Wifi and went into settings> software update to refresh, and there is no awaiting update. I didn't change to unlock firmware (as I do not know how). How do you go about installing the updates to latest Oreo using Odin? I am on 7.1.1 with build 2BQK2
Click to expand...
Click to collapse
I recommend that you try a factory reset to see if that pushes the OTA update.
If this fails, I will help you step by step with Odin.
I have searched everywhere but I didn't find a reply to my question.
A couple of days ago I have updated my phone LLD-L31 to the version 8.0.0.132 through Firmware Finder (it worked for me with proxy method) then I decided to revert back to the previous version 8.0.0.131. So I started reading guides to install a firmware on Huawei/Honor devices, I have downloaded the FullOTA package version 8.0.0.131 with Firmware Finder, placed it in the folder dload on my SDcard and started the intstallation in the project menu (accessible digiting *#*#2846579#*#* in the dialer), it started but suddenly it ended with a message "installation failed".
So my question is: how can i revert to the previous version of the software (or to the out of the box firmware installed on my device)?
karmakey said:
I have searched everywhere but I didn't find a reply to my question.
A couple of days ago I have updated my phone LLD-L31 to the version 8.0.0.132 through Firmware Finder (it worked for me with proxy method) then I decided to revert back to the previous version 8.0.0.131. So I started reading guides to install a firmware on Huawei/Honor devices, I have downloaded the FullOTA package version 8.0.0.131 with Firmware Finder, placed it in the folder dload on my SDcard and started the intstallation in the project menu (accessible digiting *#*#2846579#*#* in the dialer), it started but suddenly it ended with a message "installation failed".
So my question is: how can i revert to the previous version of the software (or to the out of the box firmware installed on my device)?
Click to expand...
Click to collapse
You should have an option to downgrade in the about section/ the update menu of your phone if you did it right.
Otherwise you may need to use the HuRupdater Method.
Fredin_ said:
You should have an option to downgrade in the about section/ the update menu of your phone if you did it right.
Otherwise you may need to use the HuRupdater Method.
Click to expand...
Click to collapse
Thanks for your reply!
I don't have this option, but if I remember well I hadn't it also in the previous version of the firmware.
So i can't install a previous version of the firmware simply downloading it an putting into dload folder of the SDcard?
karmakey said:
Thanks for your reply!
I don't have this option, but if I remember well I hadn't it also in the previous version of the firmware.
So i can't install a previous version of the firmware simply downloading it an putting into dload folder of the SDcard?
Click to expand...
Click to collapse
Can you please specify why do you want to roll back?
Because most people just wanna upgrade to a newer version.Newwr versions will have better stability so it's recommended to keep the latest version unless you have some bugs.
I honestly don't know why the dload method doesn't work, seems that it doesn't work for most people.
I think you'll be able to roll back using HuRupdater. But that'll mean you'll have to unlock bootloader and flash twrp first. Then you can go all stock from there.
Here's a guide to the HuRupdater from @zxz0O0
https://www.google.co.in/amp/s/foru...lash-official-firmware-recovery-t3769279/amp/
Fredin_ said:
Can you please specify why do you want to roll back?
Because most people just wanna upgrade to a newer version.Newwr versions will have better stability so it's recommended to keep the latest version unless you have some bugs.
I honestly don't know why the dload method doesn't work, seems that it doesn't work for most people.
I think you'll be able to roll back using HuRupdater. But that'll mean you'll have to unlock bootloader and flash twrp first. Then you can go all stock from there.
Here's a guide to the HuRupdater from @zxz0O0
https://www.google.co.in/amp/s/foru...lash-official-firmware-recovery-t3769279/amp/
Click to expand...
Click to collapse
After installing the version 132 I asked the technical support through HiCare and they told me that installing firmware with Firmware Finder could void warranty so I decided to revert to the previous firmware and wait for regular OTA by Huawei.
karmakey said:
After installing the version 132 I asked the technical support through HiCare and they told me that installing firmware with Firmware Finder could void warranty so I decided to revert to the previous firmware and wait for regular OTA by Huawei.
Click to expand...
Click to collapse
I'm not sure but I think you are on the latest build for your varient now so you won't be getting any updates untill a next build comes in.
I don't think you'll be able to roll back without the firmwares from firmware finder as you don't have an option to roll back.
The best option now would be to just wait for the next official build(might come soon as a small ota which has security patches) and then check if you are facing any issues installing which you won't as you are not rooted and dosent have an unlocked bootloader. So don't worry ?
Fredin_ said:
I'm not sure but I think you are on the latest build for your varient now so you won't be getting any updates untill a next build comes in.
I don't think you'll be able to roll back without the firmwares from firmware finder as you don't have an option to roll back.
The best option now would be to just wait for the next official build(might come soon as a small ota which has security patches) and then check if you are facing any issues installing which you won't as you are not rooted and dosent have an unlocked bootloader. So don't worry
Click to expand...
Click to collapse
Version 8.0.0.133 with July security patch just arrived and installed through official OTA!
karmakey said:
Version 8.0.0.133 with July security patch just arrived and installed through official OTA!
Click to expand...
Click to collapse
Good to hear you are up and running fine ?
Want to downgrade my honor 9 lite
After some update the theme engine crashed. Themes can no longer change the notiifcation bar icons and shortcuts icons.
Downgrading version Problem
I used firmware finder and dns method to downgrade my honor 9 lite and while i register update on firware finder and opens hisuite for update it is saying u r on already the latest version
Plz help me with downgrading my version 9 to 8
I've got an AT&T branded Note 9 stuck at the Augist security patch. I've tried a few things (clearing cache on software update, setting date forward, safe mode, Smart Switch) and none have worked, so I'd like to give ODIN a try.
Based on the version I'm at now, can anyone recommend the specific files/versions I'll need to use in order to get my phone up to date but NOT wipe my data? I'd be fine with whatever the latest AT&T release is if it means that I might again begin receiving OTA updates.
My current info is in the attached screenshot. Any help would be appreciated. I'm not technically inept, but it's been a while since I flashed an update via unofficial means and never on a Samsung device.
Thanks,
-Brett.
Just download the most recent version of the firmware with SamFirm tool, then flash it with ODIN. Use HOME_CSC and you shouldn't have to wipe.
After checking sammobile, only 1 firmware available for n960u at&t which is that august firmware.
try here
https://updato.com/firmware-archive-select-model?exact=1&q=SM-N960U
nusaf said:
After checking sammobile, only 1 firmware available for n960u at&t which is that august firmware.
Click to expand...
Click to collapse
I wonder if they're missing some updates? According to AT&T, this should be the current version:
https://www.att.com/devicehowto/tut...?make=Samsung&model=SamsungN960U&gsi=Tdi5sXtc
Release date: January 15, 2019
Android version: 8.1.0
Security patch level (SPL): December 1, 2018
Baseband version: N960USQS1ARL2
Build number: M1AJQ.N960USQS1ARJA
Previous update required: N960USQS1ARJA
File size: 83MB
Mr. Orange 645 said:
Just download the most recent version of the firmware with SamFirm tool, then flash it with ODIN. Use HOME_CSC and you shouldn't have to wipe.
Click to expand...
Click to collapse
Pardon my ignorance, but would that put me on a path to no longer get updates from AT&T directly? Meaning, if I applied the latest updates that's not AT&T specific, would that cause me to no longer get updates from AT&T (not that I've been getting even those...) in the future?
Thanks,
-Brett.
zzoinks said:
I wonder if they're missing some updates? According to AT&T, this should be the current version:
https://www.att.com/devicehowto/tut...?make=Samsung&model=SamsungN960U&gsi=Tdi5sXtc
Release date: January 15, 2019
Android version: 8.1.0
Security patch level (SPL): December 1, 2018
Baseband version: N960USQS1ARL2
Build number: M1AJQ.N960USQS1ARJA
Previous update required: N960USQS1ARJA
File size: 83MB
Click to expand...
Click to collapse
Latest Stock Official ATT_ODIN_N960USQS1ARL2 Note9 December Patch, Flash N960USQS1ARL2 and you will be on Latest Official Firmware AT&T and will recieve OTA'S as well.
https://forum.xda-developers.com/galaxy-note-9/how-to/stock-official-attodinn960usqs1arl2-t3891044
Venom0642 said:
Latest Stock Official ATT_ODIN_N960USQS1ARL2 Note9 December Patch, Flash N960USQS1ARL2 and you will be on Latest Official Firmware AT&T and will recieve OTA'S as well.
https://forum.xda-developers.com/galaxy-note-9/how-to/stock-official-attodinn960usqs1arl2-t3891044
Click to expand...
Click to collapse
Thanks!
So I can go right from my current August version straight to this latest without incrementally doing each patch in between?
zzoinks said:
Thanks!
So I can go right from my current August version straight to this latest without incrementally doing each patch in between?
Click to expand...
Click to collapse
Yes just flash away, do a data backup before you flash, cause AT&T will wipe your phone.
Sent from my SM-N960U using XDA Labs
nusaf said:
After checking sammobile, only 1 firmware available for n960u at&t which is that august firmware.
Click to expand...
Click to collapse
In my experience, Sammobile never has the current ATT firmware. They have all the other carriers, just not ATT. Plus it's slow AF to download from them.
That's why I said to use the SamFirm tool to download it. It always pulls the most recent firmware and does it directly from Samsung servers, so it's super fast and reliable.
---------- Post added at 08:24 AM ---------- Previous post was at 08:20 AM ----------
zzoinks said:
I wonder if they're missing some updates? According to AT&T, this should be the current version:
Pardon my ignorance, but would that put me on a path to no longer get updates from AT&T directly? Meaning, if I applied the latest updates that's not AT&T specific, would that cause me to no longer get updates from AT&T (not that I've been getting even those...) in the future?
Thanks,
-Brett.
Click to expand...
Click to collapse
Why would that take you off the ATT update path? I never suggested using firmware that wasn't specific to ATT. You download the most recent firmware from ATT with the SamFirm tool and flash it in ODIN.
In model you put SM-N960U and for region, you use ATT. As long as you're on an official ATT build, you stay on the ATT update path.
The SamFirm tool just pulls the updates directly from the Samsung servers, rather than going through slow-ass sammobile or updato.
Mr. Orange 645 said:
...
Why would that take you off the ATT update path?
Click to expand...
Click to collapse
That's totally my own ignorance/caution showing. It's been quite a while since I did any sort of ROM flashing and I'm really out of the loop. I was just double checking that what you were suggesting was the latest for AT&T and not a global update of some sort.
Thanks for clarifying. I'll give the SamFirm/ODIN combo a try when I get home from work. I'll be sure to back up first (assuming Safe Switch is a good way to do so?) and hope things don't get wiped in the process. Seems to be conflicting advice between you and Venom0642, but even if it gets wiped it's not a huge deal as long as I'm backed up.
Thanks again for your time!
zzoinks said:
That's totally my own ignorance/caution showing. It's been quite a while since I did any sort of ROM flashing and I'm really out of the loop. I was just double checking that what you were suggesting was the latest for AT&T and not a global update of some sort.
Thanks for clarifying. I'll give the SamFirm/ODIN combo a try when I get home from work. I'll be sure to back up first (assuming Safe Switch is a good way to do so?) and hope things don't get wiped in the process. Seems to be conflicting advice between you and Venom0642, but even if it gets wiped it's not a huge deal as long as I'm backed up.
Thanks again for your time!
Click to expand...
Click to collapse
Yup, just back up with Smart Switch and Samsung Cloud.
When you flash with ODIN, just skip the USERDATA file and use HOME_CSC instead if CSC_OYN. That SHOULD avoid wiping your phone. But ATT is weird, so I can't promise that.
Mr. Orange 645 said:
When you flash with ODIN, just skip the USERDATA file and use HOME_CSC instead if CSC_OYN. That SHOULD avoid wiping your phone. But ATT is weird, so I can't promise that.
Click to expand...
Click to collapse
EDIT - I decided to just give it a try. I flashed the AP, BL, CP, and CSC from Venom0642's post above and skipped Userdata. It worked, without wiping the phone!
Current version info attached. Thanks all for your help!
zzoinks said:
EDIT - I decided to just give it a try. I flashed the AP, BL, CP, and CSC from Venom0642's post above and skipped Userdata. It worked, without wiping the phone!
Current version info attached. Thanks all for your help!
Click to expand...
Click to collapse
Glad you got it all figured out!!
Will this work on a Note 9 that was originally on Sprint converted to AT&T? I bought this phone on Ebay to use for ATT and the software shows as ATT/ATT/SPR. I am still on October update and want to try to flash the update to at least December.
Just downloading the first system update.
January security patches and some other, not specified, fixes and improvements..
I did Not get it until now.
Reteu2,Red Moto G7 plus.
See screenshot.
Thank you very much.
I think I Wil get it in the next few days.
I have the Red one.
FrankRr said:
See screenshot.
Click to expand...
Click to collapse
Btw, what you use to hide notch?
I do not use anything to hide the notch.
In the settings there is nothing.
i'm curious, what uses FrankRr, my screenshots are not rounded
emerel said:
i'm curious, what uses FrankRr, my screenshots are not rounded
Click to expand...
Click to collapse
My Screenshots are rounded,too,and i do not use anything to hide notch.
I think notch is Not showen in Screenshots.
emerel said:
Btw, what you use to hide notch?
Click to expand...
Click to collapse
I use Nacho Notch from play store.
Motorola Chat Said for German Version reteu2 the january Patch is still on soak Test and is coming soon.
I just received update with January patch in Poland (software channel reteu).
washoq said:
I just received update with January patch in Poland (software channel reteu).
Click to expand...
Click to collapse
Here in Holland too:laugh:
Now in Sweden too?.
anyone would care to capture the OTA and make a twrp-flashable zip? I unlocked bootloader already and don't want to go all over fresh installation again
stuck on PPW29.98-66 reteu2
I recently bought the phone from Amazon.es. Based on IMEI my phone is for Cyprus which is kind a wierd.
My problem is that I'm stuck on PPW29.98-66 with January security patch and don't get update through OTA.
LMSA app does not update the phone even though it found this update.
XT1965-3_LAKE_RETEU_9.0_PPW29.98-111_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
After finishing the update I'm still on the old firmware.
On lolinet I found firmwares for RETEU software channel only.
Is it possible to flash RETEU firmware on RETEU2 phone via RSDlite 6.2.4 without unlocking bootloader or harming the phone causing irreversible issues like hard brick, google pay malfunction, radio not working etc.?
PpenoO said:
I recently bought the phone from Amazon.es. Based on IMEI my phone is for Cyprus which is kind a wierd.
My problem is that I'm stuck on PPW29.98-66 with January security patch and don't get update through OTA.
LMSA app does not update the phone even though it found this update.
XT1965-3_LAKE_RETEU_9.0_PPW29.98-111_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
After finishing the update I'm still on the old firmware.
On lolinet I found firmwares for RETEU software channel only.
Is it possible to flash RETEU firmware on RETEU2 phone via RSDlite 6.2.4 without unlocking bootloader or harming the phone causing irreversible issues like hard brick, google pay malfunction, radio not working etc.?
Click to expand...
Click to collapse
Same problem here
Use latest LMSA application. It has been updated recently and will update your phone to the latest firmware.