I'm not new to the ROM world as I've been doing this for about a year. I usually switch between CM (Lineage) or CypherOS and today I went to TWRP to update it from 3.0.2 to 3.1. After flashing it in TWRP and rebooting back into recovery, my PC no longer detects my device. I have no ROM installed (since I was in the process of switching) and now I'm stuck. I can't get files onto my phone.
I have tried reflashing other versions of TWRP using fastboot but they fail every time. I could really use some help
Update: It was the drivers on my PC. I tried on another laptop and it worked fine.
Related
Hello everyone,
I recently wanted to root my galaxy tab s2 and install a custom rom on it to enhance performance, someting i've done before with my old phone where everything worked fine. So i used autoroot to root the tablet which worked fine and choose to install lineageos afterwards. i found a fitting version of lineage on their official website, installed twrp on my tablet and used it to install lineageos and GApps. However i did not unlock my bootloader using adb since i didnt have to do that back when i rooted my phone and i read on a forum that unlocking oem in the developer settings would be enough. This is where the problems start. After i installed the custom rom the tablet would try to boot into the os for a couple of minutes only showing a loading animation just to boot straight into recovery mode afterwards. In an attempt to fix the error i used odin to install a stock rom from sammobile on the tablet. However now it doesnt even boot into recovery anymore. instead it only shows the stock rom loading animation until the battery emptys. Though i can enter download mode from that position and then cancel it in order to reboot the device which enables me to enter recovery mode. Does anyone have an idea how i could boot a normal os again or is the device hard bricked? The only idea i have left is trying to install a new os from an sd card.
I have the same issue. I installed unofficial lineageos 16 to exynos 2015 t810. I have newest odin and twrp. Im wondering if i need to install or unlock the bootloader to get past the logo loop then recovery bootup after 5 minutes. I followed clean tutorials.
Update: i found this to try.
Quote:
Originally Posted by -beluga-
Hi, first of all thanks for the ROM. Unfortunately I am unable to get my T710 running properly with today's packages (it ran 15.1 so far)
- lineage-16.0-20191009-UNOFFICIAL-gts28wifi.zip
- addonsu-16.0-arm-signed.zip
- open_gapps-arm-9.0-pico-20191009.zip (some with nano or stock)
I am doing a full clean install every time (over 10x so far) but only get it to boot using the ROM alone. Any mod, such as addonsu, gapps or even trwp app cause it to show the Lineage boot screen for quite a while until dropping back into TWRP. Since there is a virtually infinite amount of permutations which versions to try - can someone who is successfully installed 16.0 with Gapps on a T710 let me know their version combination please?
Thanks.
pico-20191009 is giving problems with the 1009 build on my T810 too. Pico-20191006 and Magisk 19.4 are doing the trick for me.
Don't know about other combinations
BTW, it's advised not to install the TWRP app as it is known for causing bootloops on this rom.
Don't know for sure, but wiping internal storage before installing rom might be useful too.
Hi,
I have Carbon ROM with Android 10,
I wanted to flash Bliss ROM, and it says that I need a rooted device,
So I've downloaded Magisk and follow the instruction, created a boot.img and flashed it in fastboot, then I did the same only with twrp recovery & Magisk, flashed it and now it is wiered and I'm not sure what is the problem,
I have fastboot BUT when I try to perform any command, it shutsdown and preety useless, I've tried from PC, if I try from MAC, I can boot into twrp but every operation is causing the tablet to reboot.. So I can't even flash a stock ROM,
In PC, the recognized Android device (When in fastboot mode) I update it's driver to Android bootloader device
How can I solve it?
Thanks !!!
Hi
i was trying flash CrDroid ROM on Mi9, unfortunately the system did not wake up despite correctly installing it. I think ok, I will install other ROM. I wipe the data and this is where the problem appeared - I cannot transfer the file to the phone.
PC not detect the phone (before the first flash there was no problem with it), adb fastboot did the same (before 1st flash it did NOT detect it either, nothing changed,). USB OTG is not working. I tried to reinstall the drivers.
TWRP is custom - Orange Fox
Any ideas?
Hi
A few months ago I was able to flash on angelica lineage-17.1-20210326-UNOFFICIAL-angelica.zip and this worked well. Yesterday I tried to flash the s same image again and after several attempts I get a black backlit screen when lineage is meant to start. I reflash stock _V12.0.10.0.QCRMIXM then a recovery - PBRP 3.0.1. From there I was having issue
What is the flashing process for an unlocked device that has something like TWRP/Pitch Back/Orange Fox installed?
I guess once you unlock and can flash the recover you use the recover to flash the zip, then reboot and flash magisk.zip and everything should work? Or is there some step missing.
I had this problem too with the google pixel 7 pro. Can't help ya there on that one. I even tried re installing older firmware and it still didn't work. Maybe the bootloader is permanetly downgradable but the firmware of the stock is. Just a guess. Lineage os 20 is an unofficial build at the moment that receives hardly any updates.
Hi,
I have a problem in which when I flash the TWRP (any Android version), then when i'm in the TWRP and I plug in the usb cable from PC, the phone reboots, so it unallows me to use sideload.
And also i can't install LineageOS from SD Card, after reboot it just bootloops recovery.
Everything was fine, i successfuly flashed LOS before on this phone, but now when i want new version it just doesn't work.
What can i do?
Edit: Seems like the official LineageOS build for merlinx doesn't work, but official does. How can I fix it?