Hello.
Lately my device has failed to stay on for long, and yesterday my phone is booting to the bootlogo while charging, and after five seconds it blackscreens and repeats.
I cannot boot into any state but fastboot, and I have already tried every option in the fastboot menu, including restoring to stock through fastboot using a Windows 10 PC.
The phone changed the bootlogo correctly to the unlock warning, but still fails to boot.
Any help is appreciated.
Flash a custom rom....
Youtube helps how to do
When my xt1064 bricked (rom stock) I installed Lineage.
You should try that.
I had a very similar thing on my Moto G2
Went totally flat using it in the car, while attempting to charge off the car and then off a powerpack
Just booted as far as the unlocked bootloader screen and then rebooted.
I could get into fastboot, but when I tried to get into recovery TWRP, it hung on the TWRP splash screen.
I tried all sorts of things, including disassembling and disconnecting the battery and charge it on a bench PSU (with current and voltage limiters)
Still no good, so I realised the battery was not the problem...
Eveuntually I gave up recovering the files, booted into fastboot, re-installed the stock rom, but it still didnt work
However if I erased the cache and the userdata partition it came back to life
So..
I'd initially suggest getting into fastboot and erasing the cache partition.
mfastboot erase cache
If its still no good, try erasing the user data partition as well
mfastboot erase userdata
If that still fails, get hold of the stock Lollipop ROMs, and flash the whole lot using mfastboot e.g.
mfastboot erase boot
mfastboot erase system
mfastboot erase userdata
mfastboot erase cache
mfastboot erase webtop
mfastboot erase preinstall
mfastboot flash partition ROM_FILES/gpt.bin
mfastboot flash motoboot ROM_FILES/motoboot.img
mfastboot flash logo ROM_FILES/logo.bin
mfastboot flash boot ROM_FILES/boot.img
mfastboot flash recovery ROM_FILES/recovery.img
mfastboot flash system ROM_FILES/system.img_sparsechunk.0
mfastboot flash system ROM_FILES/system.img_sparsechunk.1
mfastboot flash system ROM_FILES/system.img_sparsechunk.2
mfastboot flash system ROM_FILES/system.img_sparsechunk.3
mfastboot flash modem ROM_FILES/NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg ROM_FILES/fsg.mbn
Related
THIS IS NOT FOR WARRANTY, I KNOW IT'S NO LONGER VALID, I DON'T CARE ABOUT WARRANTY, IT'S FOR SECURITY PURPOSES.
This is not so much a question, more of informing of my findings. So I finally managed to relock the bootloader of the phone, apparently it is possible with non dev version. Just had to run this with the latest T-Mobile 4.4.2 firmware:
mfastboot oem lock begin
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot erase customize
mfastboot erase clogo
Click to expand...
Click to collapse
It is confirmed as locked in the fastboot.
Code:
Device is LOCKED. Status Code: 2.
However, the boot logo still have the "bootloader unlocked warning", which was what I wanted to get rid off, this is even after flashing the stock logo.bin to the phone before relocking. I also noticed that even after it is locked, I am still able to flash the modified logo.bin (that replace the bootloader unlocked warning). I guess this will have to do, however, my intention was to returned the device to 100% stock.
I can understand why Motorola does it, but it's just bad for user security to have a big label to alert everyone that your phone is insecure.
Hello There,
today i tried flashing a stock rom on moto g2 currently runniing 4.4.4 RETAILDSDSALL_XT1068_4.4.4_KXB21.85-23_cid7_CFC.xml.zip
i was successfully able to se msg like sending and done while i was pasting this commands
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk1
mfastboot flash system system.img_sparsechunk2
mfastboot flash system system.img_sparsechunk3
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
but when my phone restarted it was on same old lock screen wallpaper apps nothing changed at all??
pleas help me all the process were successfully finished with done!!! msg but at the end phone was on same condition before flashing please help
Hi!
I have a Moto G dual sim and I recently updated my ROM to Lollipop XT1064 (biggest mistake in recent history!)
Things went really well for a day then I made two mistakes:
1- SU Binary required update so I told it I have TWRP recovery when I did not. that made my phone freeze and kept restarting before getting to the moto logo.
2- I then decided to flash back to 1068 to redo the whole thing, but I mistakenly used Moto x (it was a version that worked on Moto g single sim, I think.. not sure anymore)
Since then I have tried flashing 1068 4.4.4 stock ROM and every time i end up with no network signal (wifi NOR the both SIMs.)
I was able to flash modem files successfully and in my pursuit to fix wifi I had to flash other roms but now I cannot even fix the SIM signal.
Please note that I have no data that I care about, I want ANY ROM that make my phone more valuable than a paperweight.
To sum up:
- OEM is unlocked
- I get flash and get into custom recovery
- I am able to flash stock ROMs
- Was not able to get any ROM where WIFI works (not able to enable it. never worked since the problem started)
- Was able once to get the SIMs to work (were not ale to do it again although I repeated the same steps which were
Steps I used to flash stock ROMs:
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
Steps to attempt to enable SIMs:
mfastboot flash modem NON-HLOS.bin
mfastboot flash fsg fsg.mbn
mfastboot reboot
I hope i provided enough info... if not, please let me know what to add.
Many thanks in advanced for helping or taking the time to read words of a desperate human being!
Hi,
I have a moto g 2014 xt1068 stuck at a black screen just after the motorola boot animation.
The beginning:
It all started because one guy started messing with the phone, unlocked it's bootloader and installed some custom roms. As the guy told me, the phone run out of juice while "configuring the android apps" phase and after charging it got stuck after the boot animation ever since.
What i tried to fix the phone:
First i tried to install multiple stock roms, from for example windows-tool-moto-g-2014-xt1064-restore.
I did it in osx and adapted the bash script, following every command. It always worked perfectly while flashing but after restarting i got the same result every time - black screen after boot animation.
One example of my flashing script
Code:
#!/bin/sh
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
read -p "Press [Enter] key to reboot..."
mfastboot reboot
echo "Finished!"
Then i tried to install a custom recovery tool:
I picked TWRP and downloaded it from both the official website and this thread. The flashing went smoothly but when i restarted it, got into fastboot, selected the recovery and booted to the recovery it booted into the stock recovery! My flashing didn't made any difference whatsoever.
The commands to flash the twrp img
Code:
$ mfastboot flash recovery TWRP_2.8.0.1_Titan_v2.img
$ mfastboot reboot recovery
Finally someone told me that sometimes some phones can be fixed by unplugging the battery...
I did it as a moment of pure despair and open the phone, unplugged the cable from the board and got everything together again. After trying to flash a stock rom and a custom recovery i got the same results as above.
I really would apreciate some help. Anything i should try? Something i did wrong?
Thanks in advance for any help.
Vinxe
Did you try wiping ur cache and Dalvik-cache?? And when do u see the black screen, after the motorola logo or after the boot animation??
Hi, guys!
It's been about 24h since I had purchased my Moto X (Unlocked), and I've already broken ip
So here's the story of my unit:
From the box it came with 5.x, i've been using it for roughly two-three hours with Telus sim, everything was totally fine.
Then I got myself into a situation, where I wanted to install CM12. So I did, everything was fine (except for the battery life), and I went to sleep.
First thing in the morning, I wanted to try something new (Flyme OS). And there the stuff went wrong. I wanted to do a full wipe of the phone.
I did it, by manually erasing each partition one by one.
Then I had several attempts of installing it, having them all failed. At this point, I had realized that I don't want to install it anymore, so I have downloaded the stock firmware and flashed it up with this sequence:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
mfastboot flash system system.img
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem config carrier vzw !!! (was not sure that this was right)
fastboot oem fb_mode_clear
HOWEVER! On my first attempt, modem file was not right (as my phone was continuously rebooting on first setup (while choosing wifi network).
The second attempt with different NON-HLOS.bin file went ok, wifi is working like charm.
BUT now there is no cellular connection at all! I have tried two SIM (Telus and Megafon, which both work inside my iPhone 6)
At this point I'm totally stuck and desperately ask for your help
Go ask in the 2nd Gen forum, that's what it's there for.
Sent from my Nexus 6