Database Develop

Cyanogen Camera

Hi, i am sharing Cyanogen Camera which got installed on my Phone,
as many users cant install it from APKMIRROR, i thought this might help
Please say if its working or not !!
View attachment base.apk
or
http://www.apkmirror.com/apk/cyanogenmod/cyanogen-camera/cyanogen-camera-2-0-004-5fa8c79c0b-30-release/camera-2-0-004-5fa8c79c0b-30-android-apk-download/
NOTE: the problem is Latest version of CyanogenCamera is getting an Error, try this version - This will work
Click to expand...
Click to collapse
:good:

Yes it is working but auto focus works the same or worse than on stock/Better camera and the quality is also worse than stock/better camera - why would anybody use it?

it's working for me too

spawnn617 said:
Yes it is working but auto focus works the same or worse than on stock/Better camera and the quality is also worse than stock/better camera - why would anybody use it?
Click to expand...
Click to collapse
sorry for the dissappointment
its just another camera which i found interesting, it takes images a little different than other camera apps, so i felt to share it :fingers-crossed:

nandakis4 said:
sorry for the dissappointment
Click to expand...
Click to collapse
Don't be sorry. It is OK we share and discuss :good:

The sensor can normally support 1080p in 60 fps (IMX 258 Sony), If someone manages to make it work, its would be great!

Did not work on 7.1.1

Camera[Mod] 60fps Front Camera

60fps from Selfie Caam

Interesting. Have been loving your mods so far!

Ok im very interested on this but... And sorry 4 my noob question: how can i use this? Any explanation please? Thanks dude

Armando Lopez said:
Ok im very interested on this but... And sorry 4 my noob question: how can i use this? Any explanation please? Thanks dude
Click to expand...
Click to collapse
It's a lib file, you move it to it's respective directory with correct permissions and then reboot

This should go into wich folder?
Can't you make a twrp package please?

defcomg said:
60fps from Selfie Caam
Click to expand...
Click to collapse
Hello sir, I'm using custom ROM 9.0 (Pixel Experience) and my Moto Camera is working fine but only one thing is not working and that is the 1080p(60fps) video. When recording video from the back facing camera, all the other video sizes are working fine but whenever I switch to the 1080p 60fps and try to record a video the camera does nothing and a message pops out "Cannot start video capture. Another app may be using the mic". My front facing camera is working properly but this one particular problem is bothering me alot.

[APP][CAMERA-MOD][7.1.X] Collection camera Modded [NEWS][12/08]

@Arnova8G2 starting this thread for Mi Max 2. Please feel free to edit the content.

i can warmheartedly recommend this website right here: https://www.celsoazevedo.com/files/android/google-camera/
listing all current GCam ports from the most important devs in that area
At the moment, it looks like the Arnova8G2 ports are the most compatible ones with our Mi Max 2 phones. v1.2 doesnt have Portrait Mode but works flawlessly including HDR+ Enhanced and basically all Phone Model HDR+ modes. All v1.3 and v1.4 ports dont work well on our phones (lots of black screens). v1.5 beta works better and also includes a working Portrait Mode, however only "Nexus 6" Auto and "Pixel 2017 ZSL HDR no PD" Phone models work concerning HDR+, all others cause a black screen. Thus, HDR+ Enhanced is not available.
So its either v1.2 including HDR+ Enhanced due to lots of HDR+ phone models working properly, but without Portrait Mode
or
v1.5 including Portrait Mode but only with regular HDR+ due to just two phone modes working for HDR+
cheers!

Updated to V1.5Beta 2 and it's a lot better, Potraits works front and back. Motion took picture but nothing is saved.
I noticed Nexus 6 is really slow in processing
EDIT: Pixel 2017 ZSL HDR No PD/Pixel2 seems faster but stuck at processing HDR+ in gallery and photo never saved

silverstream said:
Updated to V1.5Beta 2 and it's a lot better, Potraits works front and back. Motion took picture but nothing is saved.
I noticed Nexus 6 is really slow in processing
EDIT: Pixel 2017 ZSL HDR No PD/Pixel2 seems faster but stuck at processing HDR+ in gallery and photo never saved
Click to expand...
Click to collapse
yes thats the same experience i am having. only nexus 6 auto works, unfortunately.
in what way is v1.5 beta 2 better? please specify...
Sent from my Xiaomi Mi Max 2 (Oxygen) using Tapatalk

jbmc83 said:
yes thats the same experience i am having. only nexus 6 auto works, unfortunately.
in what way is v1.5 beta 2 better? please specify...
Sent from my Xiaomi Mi Max 2 (Oxygen) using Tapatalk
Click to expand...
Click to collapse
Was referring to 1.5b2 better than v1.4 ?

Suggest to merge with another thread: https://forum.xda-developers.com/mi-max-2/help/google-hdr-camera-t3729220

silverstream said:
Suggest to merge with another thread: https://forum.xda-developers.com/mi-max-2/help/google-hdr-camera-t3729220
Click to expand...
Click to collapse
good idea
Sent from my Xiaomi Mi Max 2 (Oxygen) using Tapatalk

It does not work when you try to make a video with the rear camera with the video stabilizer.

jbmc83 said:
good idea
Click to expand...
Click to collapse
Bro can you please s suggest which version to use with which settings that work with video mode too? Currently using v1. 5 beta of arnova and video mode isn't working on nexus 6 settings

Ruguoli said:
It does not work when you try to make a video with the rear camera with the video stabilizer.
Click to expand...
Click to collapse
works fine here. arnova8g2 v1.5 beta1, beta2 and stable...
Sent from my Xiaomi Mi Max 2 (Oxygen) using Tapatalk
---------- Post added at 05:58 PM ---------- Previous post was at 05:55 PM ----------
ridershahmir said:
Bro can you please s suggest which version to use with which settings that work with video mode too? Currently using v1. 5 beta of arnova and video mode isn't working on nexus 6 settings
Click to expand...
Click to collapse
arnova8g2 v1.5 beta1, beta2 and stable all work fine, including all video resolutions back and front camera. be sure to set "nexus 6 auto" for config camera hdr+ and "nexus 6p" for model in settings.
rest of the settings i have detailed in the lineage os thread, it was post number...dont remember exactly, but it was somewhere 845-850 in that range
Sent from my Xiaomi Mi Max 2 (Oxygen) using Tapatalk

Hi. yes, I do have the configuration that you mention. from old versions, 1.3. to me the video gives me failure. in version 1.5. recording at 4k I have no problem. if under the resolution to 1080 recording at 30FPM / 60FPM to take advantage of the stabilization, I get an error. therefore I have it at 4k and no error. the rest works great for me. Keep investigating. I have the .21 version of xiaomi eu. The other scrubber app works for me.

Ruguoli said:
Hi. yes, I do have the configuration that you mention. from old versions, 1.3. to me the video gives me failure. in version 1.5. recording at 4k I have no problem. if under the resolution to 1080 recording at 30FPM / 60FPM to take advantage of the stabilization, I get an error. therefore I have it at 4k and no error. the rest works great for me. Keep investigating. I have the .21 version of xiaomi eu. The other scrubber app works for me.
Click to expand...
Click to collapse
ah yes, versions 1.3 and 1.4 are no good, video doesnt work there. stick to either 1.2 or 1.5.
as for sub 1080p with video stabilization, i think thats miui related, since another member posted something similar. i have no troubles at all with video recording on lineage os 14.1, no matter which resolution or camera is used. stabilization is always switched on btw.
Sent from my Xiaomi Mi Max 2 (Oxygen) using Tapatalk

jbmc83 said:
ah yes, versions 1.3 and 1.4 are no good, video doesnt work there. stick to either 1.2 or 1.5.
as for sub 1080p with video stabilization, i think thats miui related, since another member posted something similar. i have no troubles at all with video recording on lineage os 14.1, no matter which resolution or camera is used. stabilization is always switched on btw.
Click to expand...
Click to collapse
Nope, with these settings you can only record video once, when you start recording another video, camera crashes. I'm on Los

ridershahmir said:
Nope, with these settings you can only record video once, when you start recording another video, camera crashes. I'm on Los
Click to expand...
Click to collapse
nope, i an record as many video clips as i like in direct succession. be aware though that i have jpeg wuality set to 100% and dirty lens warning disabled. no idea if that makes any difference though. i also have back camera set to 4k and front to 1080p for video recording.
this is on arnova8g2 v1.5 stable btw.
Sent from my Xiaomi Mi Max 2 (Oxygen) using Tapatalk

jbmc83 said:
nope, i an record as many video clips as i like in direct succession. be aware though that i have jpeg wuality set to 100% and dirty lens warning disabled. no idea if that makes any difference though. i also have back camera set to 4k amd front to 1080p for video recording.
Click to expand...
Click to collapse
Front video camera recording well?
---------- Post added at 11:38 AM ---------- Previous post was at 11:38 AM ----------
jbmc83 said:
nope, i an record as many video clips as i like in direct succession. be aware though that i have jpeg wuality set to 100% and dirty lens warning disabled. no idea if that makes any difference though. i also have back camera set to 4k amd front to 1080p for video recording.
this is on arnova8g2 v1.5 stable btw.
Click to expand...
Click to collapse
And which magisk modules are you using?

ridershahmir said:
Front video camera recording well?
---------- Post added at 11:38 AM ---------- Previous post was at 11:38 AM ----------
And which magisk modules are you using?
Click to expand...
Click to collapse
ill check front video recording for you, give me a moment.
dont have magisk installed, using inbuilt privacy guard of lineage os for root access control.
edit: front camera video recording works as well, just recorded two clips right after each other without problems.
Sent from my Xiaomi Mi Max 2 (Oxygen) using Tapatalk

jbmc83 said:
ill check front video recording for you, give me a moment.
dont have magisk installed, using inbuilt privacy guard of lineage os for root access control.
Click to expand...
Click to collapse
Also try to record 2 to 3 clips using rear camera on 1080p, and see if you face any error. BTW thanks for your timely replies

ridershahmir said:
Also try to record 2 to 3 clips using rear camera on 1080p, and see if you face any error. BTW thanks for your timely replies
Click to expand...
Click to collapse
sure thing, gimme another moment.
recorded three clips one right after another, each at 1080p with 30fps and 60fps, respectively (total of 6 clips). no problems encountered.
have u given proper storage permission for the app? also, have u installed the modded media_profiles.xml file in system/etc for proper usage of slomo and 60fps? maybe one of those two is the culprit in your case...
Sent from my Xiaomi Mi Max 2 (Oxygen) using Tapatalk

jbmc83 said:
sure thing, gimme another moment.
recorded three clips one right after another, each at 1080p with 30fps and 60fps, respectively (total of 6 clips). no problems encountered.
have u given proper storage permission for the app? also, have u installed the modded media_profiles.xml file in system/etc for proper usage of slomo and 60fps? maybe one of those two is the culprit in your case...
Click to expand...
Click to collapse
Well given proper media storage but don't know what media profiles are you talking about, can you please tell me how to do that?

ridershahmir said:
Well given proper media storage but don't know what media profiles are you talking about, can you please tell me how to do that?
Click to expand...
Click to collapse
well im assuming you have root access, so:
- download the modded media_profiles.xml file as part of this zip package here: https://mega.nz/#!MKYyWaDL!zUzUivAblq9watfHBvFuCfhC0pBJMqgd6OalVSMLvHw
- unzip the package and overwrite the stock media_profiles.xml file in system/etc directory with the modded one
- set proper permissions of the new file to rw-r-r
- reboot
- test again and see if your issues are resolved
ull need a file manager with root access for that, im using es file explorer pro, for example.
Sent from my Xiaomi Mi Max 2 (Oxygen) using Tapatalk

Huawei P20 Pro - 4k Footage with software stabilization (video included)

Hi Guys,
Just thought I share with you footage of some software stabilization of some 4k footage from my P20 Pro.
We all know that the stabilization on 4K mode is non existent (not even EIS) but adobe premiere can work wonders
Remember to set quality to 4K within YouTube
Let me know what you think

That works pretty well. Some odd effects from the software though, made it look like things were made of jelly when the camera moved.
Sent from my CLT-L29 using Tapatalk

orangecroc said:
That works pretty well. Some odd effects from the software though, made it look like things were made of jelly when the camera moved.
Sent from my CLT-L29 using Tapatalk
Click to expand...
Click to collapse
Yes - Slightly
Might try to dial it down a small amount and then seeing the result

Hello,
I'm using Google Photo to stabilize my 4k video, and it works pretty well!
Could you do a test to compare the results?
Open your original video with Google Photos, then go to setting, "Stabilize" and save.
Thanks.

aquilaziale said:
Hello,
I'm using Google Photo to stabilize my 4k video, and it works pretty well!
Could you do a test to compare the results?
Open your original video with Google Photos, then go to setting, "Stabilize" and save.
Thanks.
Click to expand...
Click to collapse
Will do a comparison over the weekend to see the difference.

If you use opencamera or ultracorder (hevc) at 3k resolution (3264x1840) then EIS works nicely, looks really smooth. Admitedly it's not 4k, but its still much better than 1080p. I'm currently using ultracorder at 36.7mbit maintier level6.2 with EIS enabled and it really does look nice.

Can you share your Ultracorder settings mate? It's crashing on mine. Cheers!

sc754 said:
If you use opencamera or ultracorder (hevc) at 3k resolution (3264x1840) then EIS works nicely, looks really smooth. Admitedly it's not 4k, but its still much better than 1080p. I'm currently using ultracorder at 36.7mbit maintier level6.2 with EIS enabled and it really does look nice.
Click to expand...
Click to collapse
I'd also be very thankful if you could share all your options, the app crushes on my P20 Pro when using the options mentioned above

any link for Ultracorder? I can't find it on playstore

nic85 said:
any link for Ultracorder? I can't find it on playstore
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=com.neaststudios.ultracorder
Sent from my HTC One (M8) using XDA Labs

quite expensive, specially if it has problems of force close. I'll try opencamera

aquilaziale said:
Hello,
I'm using Google Photo to stabilize my 4k video, and it works pretty well!
Could you do a test to compare the results?
Open your original video with Google Photos, then go to setting, "Stabilize" and save.
Thanks.
Click to expand...
Click to collapse
I think the best option right now

Sohail, have you compared google photos stabilisation with Premier?

After experimenting for a while with ultracorder I can get 3k to work fine as soon as I try EIS it crashes and I have to restart phone. Very interested to know what settings the guy who recommended the app is using?

Root : 4K video recording 16:9 (60fps).

Copy camera config.xml to sytem/product/etc .
Copy media_profiles.xml to system/etc.
https://youtu.be/WOTrqVyFPeA
It only works in automatic mode. Does not work in manual mode.

It works! But only in Auto Mode. In Manual recording when I chose UHD resolution I can't switch to 60 fps.
Wysłane z mojego LG-H930 przy użyciu Tapatalka

dav3gd said:
It works! But only in Auto Mode. In Manual recording when I chose UHD resolution I can't switch to 60 fps.
Wysłane z mojego LG-H930 przy użyciu Tapatalka
Click to expand...
Click to collapse
Yes.

Just a thought, maybe it [manual mode] would work in a different camera app? I'm guessing the LG app may not have added the "capability" for it, hence a 3rd party one might work?
I may give this a shot myself, but if you already have the XMLs installed, it would be faster if one of you tried it... I don't have the time right now to try this.

I tried these, but the camera won't open afterwards. Maybe they are only for a specific variation of the v30?

AsItLies said:
I tried these, but the camera won't open afterwards. Maybe they are only for a specific variation of the v30?
Click to expand...
Click to collapse
Okay, my mistake, they do work. Very nice and thanks to op. Not sure how others might attempt this, depends on your setup. I have Magisk and hide and systemless, not sure what others have but if you have the same, you need a Magisk module to update these files.
Here's a quick module I created, put in your download folder and use magisk 'module', click on the file and it will install it.
It does do the 60fps at 4k, but not with 'steady' ois. But, you can select the 4k option (not 60fps) and steady will stay on. It's nice to have... not sure I'll use it but it's nice to have!
thanks very much to op for sharing,
cheers
Oh yeah, wanted to mention that my gcam port does not have any additional options after this, same as it was before. Someone asked about that possibility.

I tested the camera with 4k 60fps but i observed that when I played the clip, it was 30fps.

ravi_blade said:
I tested the camera with 4k 60fps but i observed that when I played the clip, it was 30fps.
Click to expand...
Click to collapse
What did u see that indicated it was only 30fps? "I observed"? What did u observe?n I used an exif data tool and it indicated the 4k 60fps was actually variable, from 4fps to 60fps. And the 2 samples I created were at (about) 41fps.
the sample I made with 4k 30fps were exactly 30fps, according to the exif data.
I used this tool from the playstore to see all of the exif data:

Man,
I checked the file and the minimum frame rate was 41fps and max was 60. I was under the assumption that it would be locked at 60fps. Yeah... I expected a bit too much from a 3 year old SOC. Nevertheless, thanks for the help.

Here's my exif data:
megatron film

Please anyone share orginal files camera_config.xml and media_profiles.xml
I want back

xloudd said:
Please anyone share orginal files camera_config.xml and media_profiles.xml
I want back
Click to expand...
Click to collapse
Here you are, stock files:
https://www.dropbox.com/s/dk59efn4l24s9xv/camera_config.xml?dl=0
https://www.dropbox.com/s/8q90i396bkmj2ev/media_profiles.xml?dl=0
BTW this mod didn't work for me(Oreo). Camera app fc.

Is there any option to do in camera modes 2560x1440 60fps ?

Maybe somebody can reduce bitrate and force static bitrate at 4kuhd60fps for better performance?