Hello. I recently got a P9 (model EVA-AL00). Since I lived in US, I figured I might debrand the phone.
I followed this guide to unlock my bootloader and root :http://forum.xda-developers.com/huawei-p9lite/how-to/guide-unlock-bootloader-twrp-root-t3405701 and this guide to help me debrand: http://forum.xda-developers.com/p9/how-to/vdo-guide-how-to-debrand-huawei-phone-t3410045.
I unlocked the bootloader, install twrp and root with no problem. However, after I changed the oeminfo my phone reboot and I lost root, twrp, and the bootloader is locked again. Now when I tried to enter recovery mode with cmd, I get Command not allowed error. Furthermore, my phone is now only showing EVA in the model number. I am also getting a message saying my device has failed verification at startup. I am officially stuck.
Any help or pointers would be appreciated. Thank you for your time.
Get a full stock rom for your model,unzip it into the dload folder on your external sd and then hold power and both volume buttons to reflash the stock rom.
Yo dude did you fix it?
fix it?
same problem ((((((crying:
Sorry for the late reply but that did help me to fix my problem
Hello folks,
so a friend of mine is a complete noob and have this problem with his p9 plus.
The phone keeps rebooting itself in an endless loop, i can't access recovery and only when plugged in to the PC i can access fast-boot.
Phone is locked, FRP Lock.
With getvar command i managed to get this info:
rescue_phoneinfo: VIE-L09C113B170
seems that there is no full zip of this rom anywhere just partial ota (found those with firmware finder) but even with that when i try to flash recovery i get command not allowed.
On the fastboot screen of the phone i have this reboot reason AP_S_PANIC
anyone knows a how to get the phone out of this? (i was thinking that maybe unlocking the bootloader could be of any use, but in the request page it's needed the Product_ID and i don't have it. (can't *#*#1357946#*#*)
I don't know if it does work in a locked bootloader.
I have my P9+ for a week and maybe if you download a firmware compatible with your version and try to 'hard' update the phone, using a SD card with a update file on a dload folder and restarting the phone pressing VolUp + VolDown +Pwr, you can restore your friend's phone.
I'm sorry if I didn't help, I am myself stucked trying to rollback my version to MM and have the NFC and the Bluetooth working again...
myself also got this problem..please anyone..
My Huawei P10,
My phone the Huawei p10 VTR-L09 the rooting proces has gone wrong.
I now have a half root on my phone. 50%-root
I have stock recovery on my phone but this does not work properly anymore becuase failed every time.
Factory reset does not work because loop.
My Bootloader is unlocked and FRP lock.
In fastboot mode all commands are blocked because i have no remote option.
This is becuase FRP-Lock.
OEM option is greyed out.
Dload method I have tried but that does not work.
And got my bootloader code true Huawei so you would say that I can also Relock my bootloader again, but this does not work either.
I have been looking and trying at it for about 5 months now and try to find new facts or technology so that I can repair my phone and use it again optimally.
My phone works but it is not 100%.
So I have no super user rights on my phone.
I would like to hear from people who know those errors how to repair them.
Or is there only one option left for me and that is the DC- unlocker
sorry for my lack of English, Peter.
Is there no solution for my problem huawei p10?
My Huawei P10,
My phone the Huawei p10 VTR-L09 the rooting proces has gone wrong.
I now have a half root on my phone. 50%-root
I have stock recovery on my phone but this does not work properly anymore becuase failed every time.
Factory reset does not work because loop.
My Bootloader is unlocked and FRP lock.
In fastboot mode all commands are blocked because i have no remote option.
This is becuase FRP-Lock.
OEM option is greyed out.
Dload method I have tried but that does not work.
And got my bootloader code true Huawei so you would say that I can also Relock my bootloader again, but this does not work either.
I have been looking and trying at it for about 5 months now and try to find new facts or technology so that I can repair my phone and use it again optimally.
My phone works but it is not 100%.
So I have no super user rights on my phone.
I would like to hear from people who know those errors how to repair them.
Or is there only one option left for me and that is the DC- unlocker
sorry for my lack of English, Peter.
I need help Xda is there no new solution for my own fold ****top problem that annoy me everyday
I don't understand text properly .
Can you boot your phone or not?
Did you try to boot into eRecovery (not normal recovery) by connecting the phone to USB and boot as you would do it for recovery?
Does this work and are you able to do a factory reset there?
Did you try to download the latest firmware via OTA and install it?
Which version is installed?
P10 problems
Jannomag said:
Did you try to boot into eRecovery (not normal recovery) by connecting the phone to USB and boot as you would do it for recovery?
Does this work and are you able to do a factory reset there?
Did you try to download the latest firmware via OTA and install it?
Which version is installed?
Click to expand...
Click to collapse
VTR-L09C4321b185
in e-recovery I come in without problems but he lingers there every time then I get a red exclamation mark. factory reset that does not work because I have frp lock and this is why I can not install new software.(I think..) OEM lock Greyed-out I run android 7.0 and emui 5.1 thank you
The factory reset should work even the OEM Lock is greyed out.
Did you try to relock your bootloader with both commands:
fastboot oem lock UNLOCKCODE
fastboot oem relock UNLOCKCODE
If this doesn't work, you can use Firmware-Finder to upgrade to Oreo, B185 is old.
Within the app you can check firmware access, if it's accessible, update through DNS or Proxy. There are many tutorials for this.
-don´t even think to relock your bootloader it will brick your phone when you are in this state
-try to use HWOTA to reflash the whole B185 firmware
-i don´t know how you rooted your phone so i cannot help more
Did you try this from part "force upgrade"? It use dload method
https://huaweiadvices.com/flash-stock-firmware-huawei-honor-phones/
Huawei p10
Hi. I want to thank everyone for responding to my problem with my phone. And Jannomag thanks for your response yes I have tried all these commands in fastboot. I also have an original bootloader code. This way does not work for me in fastboot because it indicates all the time that no remote commands can be given. Furthermore, the half root (rooting gone bad) of my phone. Apk files when installed says that I have no Root and other APK files say that I have full root on my phone. I also can not use supersu and busybox because I have no full root to my phone. I've already done the dload method a couple of times, but I doubt that everything went very well. Nocia, I am going to try your method again and then I will let you know if this has succeeded or not. I have stock recovery and this wont work. I have no custom recovery installed. But it is a nice idea that I have some assistance from you nice people that keeps me motivated so that my phone will work once again ...keep you posted..peter (sorry for my bad Englisch)
make full unroot if you rooted with supersu (with nobody with sense will do in 2018 since we have magisk)
P10 problems
Hi,
I have tried the dload method. But I do not manage because SD card does not accept large files. SD card is in fat32 and formatting to NTSF will not work. exfat format has succeeded but I do not get large files. I have tried downloading it via phone directly to SD card and that has succeeded but then unpacking gives problems because the file is too large for SD card. New SD card purchased 16GB but same problems. A week and a half after work I started working on this and even DISKPART and other related softwares, but none of them gives good news. And Dallas-CZ I have done root with TWRP and custom GAPPS or it is called something like this but the latter is package of assembled apks. But this root has never gone well. I'm curious about your reactions and ideas thanks, Peter
just leave it.
1-you don't even know how you rooted yout phone.
2-you don't know how to put 4.6 GB file to your SD card. ( NTFS will of course work).
Sell the phone for spare parts it will save you a lot of pain.
P10 problems
i have tryed to root root with twrp and flash SuperSU-.zip file on the phone. Here went wrong because I do not have full root. Still not. I have tried so much I have tried everything i know. If you can tell me what the problem is why I can not get a 5GB file on my SD Card. If I know what I'm doing wrong then I continue with the dload method. If you say that it should be easy to put 4GB on fat32 SD card please tell me? Is it the SD card that is too small, should I just get a new one and 1 of 64 GB with ntfs? I would rather have my 16GB card work, but I can not format fat32 to NTSF on my SD-card. I am here also because I do not know what to do and need information about the correct way. Please help;;;;
You didn´t write what supersu have you flashed.
1 -have you tried to uninstall supersu in the supersu app?
2-have you tried to uninstal supersu in twrp with this method?
3-just format your 16gb sd card to ntfs. Put the right files on the sd card and follow the tutorial.
i dont think that the dload method still works.
Try the HurUpdater method...
Hi, try this method here:
HurUpdater: https://forum.xda-developers.com/hon...overy-t3769279
I had more or less the same problems and different boot, OS, a.s.o. problems.
Soemtimes I was in a loop, didnt had a working OS, other times I could get any ADB-connect.
The above way solved my problems and I could install different ROMs after I followed the method.
Hope this helps
SB
P10 problems
DallasCZ said:
You didn´t write what supersu have you flashed.
1 -have you tried to uninstall supersu in the supersu app?
2-have you tried to uninstal supersu in twrp with this method?
3-just format your 16gb sd card to ntfs. Put the right files on the sd card and follow the tutorial.
Click to expand...
Click to collapse
DallasCZ,
thank you for your reaction. I've made a mess of it and I have to confess that I do not know which Supersu version I used to flash my phone. Unroot by apk supersu I have tried but this indicates that SU binary needs to be updated so I can not. What do you mean by putting the right files on my SD card? I can not get the SD card to NTFS. I have tried all kinds of methods to format my sd card from 16 GB to NTFS but I can not. Have even bought a new card of 16 GB but this one so that it fails to format to NTFS. I can not get custom recovery installed and I now run stock recovery. twrp installed by root access does not work because I do not have root full access. And twrp at fastboot does not work because I have FRP lock and bootloader is unlocked. thank you in advance
Superblond said:
Hi, try this method here:
HurUpdater: https://forum.xda-developers.com/hon...overy-t3769279
I had more or less the same problems and different boot, OS, a.s.o. problems.
Soemtimes I was in a loop, didnt had a working OS, other times I could get any ADB-connect.
The above way solved my problems and I could install different ROMs after I followed the method.
Hope this helps
SB
Click to expand...
Click to collapse
superblond your link doesnt work for me will you please post it aigain ..thank you
P10 problems
TbiTw said:
i dont think that the dload method still works.
Click to expand...
Click to collapse
Hi .. as long as I do not get my SD card formatted to NTFS, I will not succeed .. What is the problem why that card does not want NTFS?
Link to HURUpdater Post
tamino161 said:
superblond your link doesnt work for me will you please post it aigain ..thank you
Click to expand...
Click to collapse
Sorry M8,
here is a proper link and the title is ' [Tool] [HuRUpdater] [0.4] [Flash official firmware in recovery '. (I think you need to be loged in...)
I still have the files on my hd for my Huawei P10 VTR-09, that gave me a unbricked & fully functional phone with EMUI 8.0, OS 8.0 ver. 8.0.0.382(C432) again... if you need them I could upload them for you.
Lately, I had a problem with the lock pattern; I am not able to unlock the phone even when I enter the right schema!
I had this problem for the first time 3 weeks ago and happily it was solved with a simple restart but sadly this time not.
So, I am locked out of my phone.
I have:
Nokia 8 TA-1012
Android 9
USB Debugging: Disabled
Stock recovery
Phone is not rooted
After 6 days of researching to solve this problem without losing my data and trying desperately the most solutions published in internet, it still for me one solution to test before doing a Hard Reset.
The solution is described as:
Unlock the bootloader
Install a custom recovery
Install Aroma File Manager
Delete gesture.key file
My question is:
Is there any way to unlock the bootloader and install a custom recovery without the need to enable USB Debugging?
Or if there is any other solution to unlock the phone without losing the data?
Thank you.
Hi everyone,
My Huawei P30 pro has been stuck in bootloop since I made an upgrade (a normal upgrade, pushed on my phone). I am only able to access the recovery menu but safe boot doesn't work. I tried to make firmware ugrades through wifi / eRecovery and OTG but none of these worked (I'm not sure if I tried with the right firmware, my phone version is L29C). My first (really bad) instinct was to reset the phone from the recovery menu so USB debug is not allowed anymore which means I can't access the phone through ADB or HiSuite anymore. Do you have any idea on how to resolve this problem ? Thanks for your help !