Related
I want to flash my phone with stock firmware, but I cannot find it anywhere.
I am looking for PRA-LX1C738B123.
I own Huawei p8 lite 2017
I wiped my system because I wanted to install other rom, it didn't work so I want to go back to the original.
Unfortunately I wasn't smart enough to do a backup before so I am stuck atm. The bootloader is unlocked and flashing works, I can boot into huawei eRecovery and TWRP. (eRecovery gives the getting package info failed error) I have tried the dload method with other app files, it fails at 5% every time tho.
I tried using Huawei Update Extractor and Firmware Finder but I cannot find the exact firmware.
Could someone help me with installing my firmware? Oh and I am kinda new and it would be nice to get some guides,
Thanks.
I have the same problem but with a different firmware.. now only thing i can do is use dc-phoenix paid software (15$ for 72h of use). I will try that tomorrow as i also can't find exact same firmware it was on my phone.
MobileTechArena said:
I have the same problem but with a different firmware. now only thing i can do is usedc-phoenix paid software (15$ for 72h of use). I will try that tomorrow as i also can't find exact same firmware it was on my phone.
Click to expand...
Click to collapse
Thanks for reply. I will take that into consideration, but from what I see you were looking for PRA-LX1C432B106 and they indeed have the c432 roms there, however they don't seem to have the ones that I have been looking for. They have a list of firmwares online. Anyway good luck.
barnabaXXX said:
Thanks for reply. I will take that into consideration, but from what I see you were looking for PRA-LX1C432B106 and they indeed have the c432 roms there, however they don't seem to have the ones that I have been looking for. They have a list of firmwares online. Anyway good luck.
Click to expand...
Click to collapse
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.
MobileTechArena said:
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.
Click to expand...
Click to collapse
Thanks for making it clear. Please tell me if it worked or not. Thanks.
barnabaXXX said:
I want to flash my phone with stock firmware, but I cannot find it anywhere.
I am looking for PRA-LX1C738B123.
I own Huawei p8 lite 2017
I wiped my system because I wanted to install other rom, it didn't work so I want to go back to the original.
Unfortunately I wasn't smart enough to do a backup before so I am stuck atm. The bootloader is unlocked and flashing works, I can boot into huawei eRecovery and TWRP. (eRecovery gives the getting package info failed error) I have tried the dload method with other app files, it fails at 5% every time tho.
I tried using Huawei Update Extractor and Firmware Finder but I cannot find the exact firmware.
Could someone help me with installing my firmware? Oh and I am kinda new and it would be nice to get some guides,
Thanks.
Click to expand...
Click to collapse
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.
JStrel said:
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.
Click to expand...
Click to collapse
Thanks for help! I tried but i dont' have factory reset option. All I have is Shutdown, reboot and "Download leastest version and recovery" and after I click that all it does is wants internet connection. I logged in to my wifi but it didn't work and I ended up with "getting package info failed screen".
barnabaXXX said:
Thanks for help! I tried but i dont' have factory reset option. All I have is Shutdown, reboot and "Download leastest version and recovery" and after I click that all it does is wants internet connection. I logged in to my wifi but it didn't work and I ended up with "getting package info failed screen".
Click to expand...
Click to collapse
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.
JStrel said:
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.
Click to expand...
Click to collapse
I got rom that allows me to do a factory reset, it's stuck at 99% for like 2 hours now, is it normal? If not what should I do?
barnabaXXX said:
I got rom that allows me to do a factory reset, it's stuck at 99% for like 2 hours now, is it normal? If not what should I do?
Click to expand...
Click to collapse
Unfortunately I can't help you further than what I already posted.
But keep updating in case someone more knowledgeable peeks in.
similar problem....I was fairly good but play store was stuck in pending download....
I did a wipe in TWRP, and ended with a black screen...
I can boot to eRecovery, but it fails.and also to TWRP.
when attached to PC it keeps being seen and unseen as if its stuck in a power on cycle
Any help would be greatly appreciated.
Already Tested
JStrel said:
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.
Click to expand...
Click to collapse
Hello did you already test ???
Here is the solution for every PRA-LX1: [http : // www . htcmania . com / showthread . php ? t=1326478] (sorry for the spaces, but I don't have enough posts written to post external links )
Unfortunately, it's from a spanish forum. I didn't found any problem to follow this tutorial, but maybe for someone it could be a little difficult.
Anyway, it works!
MobileTechArena said:
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.
Click to expand...
Click to collapse
Where did you find the C432 firmware? I can't succees to find it
Flashing to a completely empty phone via DC phoenix or manual via fastboot still didnt got my device started. Sometimes I end up in the eRecovery and sometimes its just stuck at boot.
I tried different version from the hicloud but none so far did the trick. Maybe someone can point me into the right direction so i can finally rescue this phone?
EDIT:
PRA-LX1C432
Sorry cant link to these files since i don't got 10 posts. Maybe PM ?
Copied the Mega TWRP backup (B100) to SD card
Flashed TWRP via fastboot
Disconnected the USB cable
Boot into TWRP
Restored TWRP backup
Restarted phone into fastboot
OEM unlocked it
Got booted into TWRP since no stock recovery there
Booted into fastboot again
flashed stock recovery
Android started to work!
Tried to update to B164 and failed
Reboot
Now it offered B110 and I tried to update to B110. Success.
Iocere said:
Flashing to a completely empty phone via DC phoenix or manual via fastboot still didnt got my device started. Sometimes I end up in the eRecovery and sometimes its just stuck at boot.
I tried different version from the hicloud but none so far did the trick. Maybe someone can point me into the right direction so i can finally rescue this phone?
EDIT:
PRA-LX1C432
Sorry cant link to these files since i don't got 10 posts. Maybe PM ?
Copied the Mega TWRP backup (B100) to SD card
Flashed TWRP via fastboot
Disconnected the USB cable
Boot into TWRP
Restored TWRP backup
Restarted phone into fastboot
OEM unlocked it
Got booted into TWRP since no stock recovery there
Booted into fastboot again
flashed stock recovery
Android started to work!
Tried to update to B164 and failed
Reboot
Now it offered B110 and I tried to update to B110. Success.
Click to expand...
Click to collapse
Yeah, that's the way! It worked for me too!
juanmemo said:
Yeah, that's the way! It worked for me too!
Click to expand...
Click to collapse
Also i noticed everytime a OTA fails you get the full version offered on next boot. So you should get a full B164 aswell after it failed
JStrel said:
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.
Click to expand...
Click to collapse
how can you boot into recovery ? i can only boot into twrp or fastboot & rescue or if i plug the huawei to the pc erecovery ???
---------- Post added at 12:16 AM ---------- Previous post was at 12:13 AM ----------
i have an huawei pra-lx1 c530 it used to boot into pra-lx1c530b111 rooted and twrp but now it doens't boot anymore, i'd like to flash to c530b160 but i can't find the firmware images
tiagoggama said:
Hello did you already test ???
Click to expand...
Click to collapse
Thanks men
I CONFIRM IT WORK PERFECTLY
For the second part go to this link for more detail :
https://boycracked.com/2016/03/14/h...-unbrick-firmware-any-huawei-android-devices/
hi guys,
yesterday i installed the oreo beta on my VTR-L29 but then i brickedd it *cry*. unfortunateley the unbrick methods found here in the forum don't work because the oreo update made some changes in the system file structure...
has anyone an idea what to do?
maybe someone can provide me a recovery image for twrp? (one for oreo, otherwise it wont work) so i can give this a try...
after over 10 hours of fiddeling around a found a really easy solution:
most of you know HWOTA helps with this, but the "normal" version wont work after flashing oreo. but this version is flashed via twrp and is still working!
but you will need a oreo compatible twrp, which you can find here
i know the links are to mate 9 software, but since the p10 and mate 9 are nearly identical, it works on the p10 as well
can you post the step by step guide?
i am on oreo 8.0.0.046 and want to flash another version, or downgrade to nougat because few things don't work on this version
i dont know if downgrading works, i just reflashed the latest oreo.
accordingly to the first link it should work, just flash the TWRP from the second link and then follow the instructions from the first link.
johdost said:
i dont know if downgrading works, i just reflashed the latest oreo.
accordingly to the first link it should work, just flash the TWRP from the second link and then follow the instructions from the first link.
Click to expand...
Click to collapse
failed install twrp- error find twrp 3.0.3, and i replaced to oero mate 9 recovery....
EDIT: success - problem was on the computer
johdost said:
i dont know if downgrading works, i just reflashed the latest oreo.
accordingly to the first link it should work, just flash the TWRP from the second link and then follow the instructions from the first link.
Click to expand...
Click to collapse
i did sucsses to install twrp but on the second step, when i press on install on twrp, the phone restart to erocovey and failed to find the files. what am i doing wrong?
i think that i am stuck with that version forever....
if you reboot to erecovery, you have not successfully installed twrp. you have to install it with "fastboot flash recovery_ramdisk <path to twrp>"
johdost said:
if you reboot to erecovery, you have not successfully installed twrp. you have to install it with "fastboot flash recovery_ramdisk <path to twrp>"
Click to expand...
Click to collapse
you misunderstood me.
i do have twrp, i created HWOTA8 folder on sd card, copied hwota8 update zip, MHA_RECOVERY8 No check and the 3 files that i renamed as it said. after that, from twrp i clicked on hwota8 update zip and begin flash, the phone reboot to stock recovery and failed to install - "files don't found".
please help me fegure out what's the problem.
thanks
t.h.i said:
you misunderstood me.
i do have twrp, i created HWOTA8 folder on sd card, copied hwota8 update zip, MHA_RECOVERY8 No check and the 3 files that i renamed as it said. after that, from twrp i clicked on hwota8 update zip and begin flash, the phone reboot to stock recovery and failed to install - "files don't found".
please help me fegure out what's the problem.
thanks
Click to expand...
Click to collapse
EDIT : the process is sucsses, but its the same version.... 8.0.0.046
Bricked, no TWRP access, any ideas?
Hi.
I know this about a P10, I have a P10 Plus (VKY-L29C605), but the process should be similar, I think.
I bricked my phone after succesfully upgrading from B174 to B321 using HWOTA. After which I decided, since I was at it, to flash the Hyperplus Kernel. This led to a bootloop. To fix it I decided to just go ahead and HWOTA B321 all over again and get over it, and would have probably gone just fine, except I decided to rebrand (C605 > C432) while I was doing that, silly (no, stupid) mistake. This led to the brick I am currently expriencing, I have no recovery access, erecovery or TWRP.
So now I am left trying to unbrick the phone. I extracted the UPDATE.APP for both update_all_hw.zip and update.zip using the Huawei Extractor Tool with no difficulty, except unbricking methods ask for boot.img, which I could not find, so I went along without it and flashed: cust.img, recovery_ramdisk.img (using fastboot recovery_ramdisk command for Oreo), and system.img. All of the commands completed succesfully, but no shebang, still bricked and no recovery access. I figure this has to do with the rebrand as the result after executing the command "fastboot getvar vendorcountry" shows the rebrand pulled through (hw/eu 432).
I am currently downloading HWOTA8.zip (3GB worth of download) to see if I can do something it. I am also downloading the L29C432B360 OTA-FULL, since I believe I am not getting any progress becuase I used the updates for L29C605B321.
The kind people at funkyhuawei told me they could fix it with their tool, but I don't have the money for that right now.
I will post updates, but any ideas would be greatly appreciated.
Many of us have posted over this in the last couple of days. Seems like Funky Huawei unbrick tool was the mehtod to get it work for me. You could try that!
or use dc-phoenix for me it worked (= in the moment i try to capture the usb ports kommunikation so i have the tool with the aktual firmware longer for 3 days :silly:
would first give dc a try 20 bucks for 3 days is ok i think (=
johdost said:
hi guys,
yesterday i installed the oreo beta on my VTR-L29 but then i brickedd it *cry*. unfortunateley the unbrick methods found here in the forum don't work because the oreo update made some changes in the system file structure...
has anyone an idea what to do?
maybe someone can provide me a recovery image for twrp? (one for oreo, otherwise it wont work) so i can give this a try...
Click to expand...
Click to collapse
Must download some software for your phone, unzip update.zip, decompile UPDATE.APP to .iso files, (like recovery.iso, system, iso, vendor iso, boot iso) use fastboot and 10 minuts job, I brik my device over 10 thimes, and repair it.
So I was able to get the C432B360 firmware and I flashed it, but no I can't enter recovery mode because the battery is low (red lightning bolt/red led flash). Anybody know how to charge or force recovery mode boot from fastboot?
If anyone needs, can use my DC-Phoenix account, I don`t need it anymore.
Your username is: cesedy
Your password is: dnL4eHEm
Greting
ure3808 said:
Must download some software for your phone, unzip update.zip, decompile UPDATE.APP to .iso files, (like recovery.iso, system, iso, vendor iso, boot iso) use fastboot and 10 minuts job, I brik my device over 10 thimes, and repair it.
Click to expand...
Click to collapse
Greeting,
Can you explain the procedure of how to do it?
Thank you
Hi everyone,
Just taking my chances if anyone in here encountered the same issue. I'm currently on EVA-L19C636B381 and the System Updater is asking me to update to B390. However, I've tried downloading the update several times but keep on getting the "Software Install Failed" error message. Any ideas on how I can update the firmware and ensure that updates will be installed seamlessly moving forward?
Note that the bootloader was unlocked before and it used to have TWRP. Now I've relocked the bootloader and installed the stock recovery.
Thanks!
Clarification:
Version: EVA-L19C636B381 (everything's stock: BOOT, RECOVERY, RECOVERY2, SYSTEM)
Would like to update to: B390
Issue: Getting "Software install failed" error message after downloading through System Update
** Used to have TWRP and root. Flashed stock IMGs
Update:
Issue solved! Please see last post for the update/solution.
thedarkinvader said:
Hi everyone,
Just taking my chances if anyone in here encountered the same issue. I'm currently on EVA-L19C636B381 and the System Updater is asking me to update to B390. However, I've tried downloading the update several times but keep on getting the "Software Install Failed" error message. Any ideas on how I can update the firmware and ensure that updates will be installed seamlessly moving forward?
Note that the bootloader was unlocked before and it used to have TWRP. Now I've relocked the bootloader and installed the stock recovery.
Thanks!
Click to expand...
Click to collapse
If you had TWRP, maybe you also rooted - root will also block OTA (you had to unroot in that case).
Btw, unlocked bootloader does not prevent/affect OTA
zgfg said:
If you had TWRP, maybe you also rooted - root will also block OTA (you had to unroot in that case).
Btw, unlocked bootloader does not prevent/affect OTA
Click to expand...
Click to collapse
Hi zgfg!
Thanks for the response. Yeah, if I'm not mistaken, it used to be rooted. However, I've installed stock B381 and stock recovery already, and still getting the error message. Checked with Root Checker and it says that there's no root access.
thedarkinvader said:
Hi zgfg!
Thanks for the response. Yeah, if I'm not mistaken, it used to be rooted. However, I've installed stock B381 and stock recovery already, and still getting the error message. Checked with Root Checker and it says that there's no root access.
Click to expand...
Click to collapse
Rooting affects Boot partition, it must be flashed back to stock. And it's recommended to Hard reset then, before OTA. For OTA, go to Settings, and choose Full upgrade
zgfg said:
Rooting affects Boot partition, it must be flashed back to stock. And it's recommended to Hard reset then, before OTA. For OTA, go to Settings, and choose Full upgrade
Click to expand...
Click to collapse
Yeah, that's what I did. Basically, everything's stock already. That's why I don't understand why I'm still getting the error message.
You can try downloading the full stock rom package and manually update with the dload method.
noalt said:
You can try downloading the full stock rom package and manually update with the dload method.
Click to expand...
Click to collapse
Hi noalt! Thanks for the response.
Yeah, kinda wondering if that'll work. For the dload method, does it really require an SD card? Also, for the dload method, it is okay to get the latest full package instead? (Upon checking using Firmware Finder, the latest one is B395 or B396)
Any steps that I can follow to do a sort of "clean install"? As in free of any modifications? In short, some kind of steps as alternative for using System Update (which I can't use due to the error message I'm getting)?
You can use any stock rom you like. If it is the same or higher build, you may not need to do a rollback. The dload method only works from sd-card. It will be a clean install.
I think the dload method is the safest. Alternatives are flashing images indiviually through fastboot but I have no experience with that, except for the recovery.img
noalt said:
You can use any stock rom you like. If it is the same or higher build, you may not need to do a rollback. The dload method only works from sd-card. It will be a clean install.
I think the dload method is the safest. Alternatives are flashing images indiviually through fastboot but I have no experience with that, except for the recovery.img
Click to expand...
Click to collapse
I see. Regarding the dload method, if by sd-card you're referring to the internal memory, I'm afraid I've tried that (creating a dload folder and putting nothing else but the UPDATE.APP file inside) and I'm getting a Software Install Failed error message as well. :crying:
No, I mean a micro sd card. You can put one in the tray next to your sim card. And then you have to shut down you phone and boot it holding vol+ vol- and power until you get into the updater.
noalt said:
No, I mean a micro sd card. You can put one in the tray next to your sim card. And then you have to shut down you phone and boot it holding vol+ vol- and power until you get into the updater.
Click to expand...
Click to collapse
Ah yes, that's the one that I have yet to try (as I don't have an SD card, the other spare phone that I have is a 5s).
UPDATE:
I eventually was able to install EVA-L19C363B395!
Initially, I was having issues with the partitions (as I tinkered around a bit with TWRP) and was stuck with the Huawei logo and not proceeding with the booting. So what I did was I flashed BOOT.img, SYSTEM.img, RECOVERY.img, and RECOVERY2.img from the stock B381 (use the Huawei Update Extractor to get it from the UPDATE.APP file from the update.zip (the large file), do some Googling to find it here in XDA . Then I was still experiencing the said issue so I used the stock recovery's features: "Wipe data/factory reset" and "Wipe cache partition" to sort of repair the issues with the partitions (didn't know how to properly do it in TWRP.
Then B381 booted and was able to access USB debugging (initially had issues with this as well, after flashing images, Settings app kept on crashing when trying to access Security and Developer options).
And then finally followed the HWOTA procedure made by @Atarii. Make sure that you're going to use the proper recovery file for your version (L09, L19, etc). According to the steps, being rooted is also required so I used @zgfg's SuperSU 2.82 permissive (https://mega.nz/#F!w41RmZKB!IG53JadhjUKgFK8anbctIw). Make sure to flash it before flashing the nocheck recovery file.
And voila! That should do it. Based on what I'm seeing, root has been removed after doing the HWOTA procedure, same goes for TWRP, and bootloader's locked again.
Thanks to all of those who responded and credit goes to @Atarii and @zgfg for the procedure and file/link.
Hi, I'm in a bad situation. My honor 9 lite (Europe) has no OS, frp lock. But it does have TWRP installed.
My question would be, since I can't flash an OS (given the frp lock) via fastboot, would it work via TWRP? Or should I just give up and buy a new phone?
Thanks a lot.
Best
Since you have TWRP, try using HURUpdater tool. It is compatible with H9L.
https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
BS4388 said:
Since you have TWRP, try using HURUpdater tool. It is compatible with H9L.
https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
Click to expand...
Click to collapse
Hi,
thanks a lot for the tip. Unfortunately, I keep getting an error when flashing following the instructions.
I discovered that nonetheless I can flash roms with TWRP. There is one particular rom, this one https://forum.xda-developers.com/honor-view-10/development/rom-t3753555 that works particularly.
However, my device with that rom keeps giving me an error "bluetooth keeps stopping". Any way to solve that?
I really don't know a solution.
Can't you enable OEM unlock in settings/developer options? so that to make frp unlocked?
Yes.
After that, I was able to finally flash stock rom
However, there's a new issue: wifi doesn't work. It actually seems like whatever rom I flash, wifi won't work the slider turns off as soon as I turn it on
Did you wipe data/factory reset through eRecovery after flashing? That is important in most cases!
BS4388 said:
Did you wipe data/factory reset through eRecovery after flashing? That is important in most cases!
Click to expand...
Click to collapse
No I did not. I think I used TWRP to do that. Will do with eRecovery next time and update you
I am still without WiFi.
I think the problem lies in the fact that my stock ROM comes from here: https://forum.xda-developers.com/9-lite/how-to/guide-unbrick-device-recover-bootloop-t3772563
I had oreo 8.1 before brick, and the rim above that I flashed is 8.0 and Indian version (not european). That maybe could explain the issue.
Problem is, I would need a system.img stock ROM to file and I can't seems to find that. In Huawei firmware finder, I only get update.zip kind of files and TRWP returns error when flashing that or when I use the HuRUpdater tool.
Also, I've noticed it's not just the WiFi, but also security options and themes for some reason
you need a working frp image which in twrp can flashed via dd... so the frp lock is gone...
In telegram group you can find image.
gabfur01 said:
I am still without WiFi.
I think the problem lies in the fact that my stock ROM comes from here: https://forum.xda-developers.com/9-lite/how-to/guide-unbrick-device-recover-bootloop-t3772563
I had oreo 8.1 before brick, and the rim above that I flashed is 8.0 and Indian version (not european). That maybe could explain the issue.
Problem is, I would need a system.img stock ROM to file and I can't seems to find that. In Huawei firmware finder, I only get update.zip kind of files and TRWP returns error when flashing that or when I use the HuRUpdater tool.
Also, I've noticed it's not just the WiFi, but also security options and themes for some reason
Click to expand...
Click to collapse
The system.app file you search for is in the update.zip file you get and you cannot flash update.zip directly from twrp, you need HuRupdater for that and the dload method doesn't work for almost anyone including me.
And you need correct the firmware for your motherboard if you want your phone to work properly.
First tick oem unlocking in developer options. Then unlock fastboot and flash TWRP.
Since you are able to boot up check your varient, the complete one not just the LLD but the rest too. Search for it in Huawei firmware finder and download the latest firmware for your model. You'll get 3 links and you'll need all three.
Download HuRupdater 0.3 zip and then rename the 3 files you got as told in the HuRu instructions. get twrp image and rename it to recovery.img and put all files in the same folder.If you want to completely revert to stock you don't have to have recovery.img but keep it just in case.
Then flash HuRupdater using twrp. You should be up and running if you did everything right.
You can then remove the recovery.img and then flash again using HuRupdater and relock the fastboot too later if you wanna play things safe using fastboot relock bootloader 'your code' .
please help me, honor 9 lite last night my flash rom forgot the data format so now can not boot into the operating system, locked FRP, can not enter the TWRP.
Hello, I know it's been a long time. I put the issue aside for a few months as I had another phone to use in the meanwhile just wanted to let you know i Just did the procedure you described and it worked perfectly! The phone is back to life :laugh:
Hi, I think i've kinda bricked my honor 5C (nem-l51), and I really need help :
A few years ago I rooted my phone to make otg work.
It worked a little while, but then a system update came up, could not update because of the twrp, so I tried to unroot it (from supersu) to do the update, and the twrp stayed after the unroot.
I stayed with the phone like this, twrp installed and update pending (still trying to install the update from time to time) and then I had to use OTG again and tried to re-root my phone.
I tried to flash the supersu files I used the first time, but, even when the flashing worked, I couldn't see the supersu app on the phone, still unrooted.
Then I tried to change the twrp (via fastboot) and I realised that I couldn't : I get the "command not allowed" failure when the recovery should get written. I tried with numerous twrp versions, and stock recovery.
So my twrp right now is the twrp-3.1.1-0-venus "OpenKirin edition" one.
The phone says it's unlocked and the frp is locked, but I can't remember if it was already the case or not when I first rooted.
I unfortunately don't have anymore the bootloader unlock code that huawai gave me originally. I have no idea how to get it again, to try to re-lock/unlock the bootloader.
Back then when I first rooted my phone, I made a back up, so I tried to restore that back up. It failed, first with "cannot wipe the cust partition". Then I tried to restore without restoring the cust partition, and I got "extracttarfork() process ended with error 255" while the system was restoring.
After that, the phone wouldn't boot into android anymore. It would be stuck at the unlocked bootloader warning message and then reboot after a few minutes.
So, lastly, I tried to install the unofficial lineageOS port from here : https://forum.xda-developers.com/honor-5c/development/rom-lineageos-14-1-honor-5c-t3713911 with my twrp.
The installation went well, but the phone is stuck while first booting in lineageOS (I let it overnight, restarted it, re-installed it, tried with the first release, nothing).
TL;DR: My phone isn't booting and I can't flash any new recovery.
Please, help me to get my phone working again
Give me the
old build number on emui
Update build you received..
Twrp working?
Fastboot?
Erecovery?
I got access to erecovery, even if the "download latest version and recovery" doesn't work. (erecovery connects to wifi, and the first thing it tries to check/download fails)
I can boot into fastboot but can't flash recovery from there because of the command not allowed problem.
I can boot into twrp, but the back up I tried to restore and the lineageos rom I tried to install both failed, so maybe the twrp has a problem?
I'm sorry I'm not sure about the build number, I'm pretty sure I was on EMUI 5.0 and android 7.x, and I think I remember comparing current build number vs the update, and it was something like B350 or B351 for the current, and B355 or B375 for the update.
I've found this in my backup file 'recovery.log' ro.omni.version=6.0.1-20160703-nemo-HOMEMADE and ro.build.id=MOB30M . So, that mean that I had android 6.x when I did the backup, way back at the beginning.
I thought the update never got installed because each time the phone would reboot to complete installation, it would reboot into twrp. But I've still updated from android 6 to android 7 somehow ?
NEM-L51C432 or NEM-L51C10 ?
NEM-L51C432 and I'm sure of that ^^
Zhyrclew said:
NEM-L51C432 and I'm sure of that ^^
Click to expand...
Click to collapse
Flash this via twrp
http://update.hicloud.com:8180/TDS/...-L51_hw_eu/update_data_full_NEM-L51_hw_eu.zip
Once done, boot to twrp and flash this
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1581/g104/v82938/f1/full/update.zip
Reboot.
If you are unable to flash the 2nd link then just use the dload method to flash this. If you are not aware of dload method, link is given in my signature.
Note, this 2nd firmware will replace your twrp with stock recovery. You should boot to b350 version and it will be full stock. Reason for flashing data file first is it doesn't replace the recovery to stock but just flashes your data, settings, apps. And 2nd link is main full firmware which will replace your boot, recovery, vendor everything and should boot.
Good luck
I flashed the first one, no error.
The second one had multiple errors :
"[...]
write radio image...
32k crc checked failure
E:unknown command [errno]
update_huawai_pkg_from_ota_zip: update package from zip failed
Updater process ended with ERROR: 7
Error installing zip file '/sdcard/update.zip'
Updating partition details...
...done
"
So I tried the dload method, and the installation started and ended at 5% with this error :
"Software install failed!
Incompatibility with current version.
Please download the correct update package."
I guess it's because I couldn't tell you the exact build number, I'm sorry for not taking note of it.
If there is a way for me to get the build number despite the status of the phone, i'm ready to do it.
If not, I'm ready to try as many versions as it takes to find the good one.
PS: I've still access to the twrp, thank god ! That was my biggest fear, because I can't flash any recovery in the current state.
Zhyrclew said:
I flashed the first one, no error.
The second one had multiple errors :
"[...]
write radio image...
32k crc checked failure
E:unknown command [errno]
update_huawai_pkg_from_ota_zip: update package from zip failed
Updater process ended with ERROR: 7
Error installing zip file '/sdcard/update.zip'
Updating partition details...
...done
"
So I tried the dload method, and the installation started and ended at 5% with this error :
"Software install failed!
Incompatibility with current version.
Please download the correct update package."
I guess it's because I couldn't tell you the exact build number, I'm sorry for not taking note of it.
If there is a way for me to get the build number despite the status of the phone, i'm ready to do it.
If not, I'm ready to try as many versions as it takes to find the good one.
PS: I've still access to the twrp, thank god ! That was my biggest fear, because I can't flash any recovery in the current state.
Click to expand...
Click to collapse
You may try other higher versions like 360, 370 etc and see your luck. Twrp will be replaced only if the installation os successful for the main firmware. Its just a trial and error for you now but I am 99% sure you should be able to revive the phone via dload method
Thank you, it's reassuring. I will not give up until I test all the versions ^^
Could you help me a little bit to find other versions, please ? The only place I know where there is update packages for my phone is there : https://forum.xda-developers.com/ho...lota-upgrade-packages-models-nem-l51-t3473110 and there is only two versions.
Zhyrclew said:
Thank you, it's reassuring. I will not give up until I test all the versions ^^
Could you help me a little bit to find other versions, please ? The only place I know where there is update packages for my phone is there : https://forum.xda-developers.com/ho...lota-upgrade-packages-models-nem-l51-t3473110 and there is only two versions.
Click to expand...
Click to collapse
Firmware finder website
Wow, thank you, I downloaded the firmware finder software, it has everything.
Should I flash the firmware in two steps like you first made me, or should I just try with only the dload method with the fullOTA firmware ?
Zhyrclew said:
Wow, thank you, I downloaded the firmware finder software, it has everything.
Should I flash the firmware in two steps like you first made me, or should I just try with only the dload method with the fullOTA firmware ?
Click to expand...
Click to collapse
Check dload guide in my signature. You can follow that now. Good luck
I tried b355, b361, b375, b377, nothing changes, same error.
I noticed that I have something related to an update in my sd card AND internal storage->HwOUC->140783->( update.zip[1.32GB], update_data_full_public.zip[344MB], update_full_NEM-L51_hw_eu.zip[412MB] )
I don't know whether these files were there before I did all these attempted updates.
Could it be that my phone is not trying to install the files I put in sdcard->dload, because he finds these files in the internal memory first, and each time try to install these ?
Should I delete them, move them, unzip them in dload folder ?
Zhyrclew said:
I tried b355, b361, b375, b377, nothing changes, same error.
I noticed that I have something related to an update in my sd card AND internal storage->HwOUC->140783->( update.zip[1.32GB], update_data_full_public.zip[344MB], update_full_NEM-L51_hw_eu.zip[412MB] )
I don't know whether these files were there before I did all these attempted updates.
Could it be that my phone is not trying to install the files I put in sdcard->dload, because he finds these files in the internal memory first, and each time try to install these ?
Should I delete them, move them, unzip them in dload folder ?
Click to expand...
Click to collapse
Copy them on PC and then try dload of files you downloaded from Firmware finder website.
These are files your phone downloaded for OTA update but as you were on twrp, they never installed it amd stays there
I copied the updates my phone downloaded on PC and then deleted them both on internal storage and sd card.
Then I tried dload method with b355,b375&b377 from firmware finder, and also with the update.zip I found in the updates my phone downloaded.
Nothing worked, all of them got the error "Incompatibility with current version. Please download the correct update package."
Should I try even more firmware versions, or should I try something else ?
Btw, I noticed my phone, when connected to my PC, is labeled as huawei-P9-lite, and I don't think it was always like that, but it's probably just because the twrp-3.1.1-0-venus.img is originally for the P9 lite.
I came accross this thread, where somebody recommends to flash stuff from fastboot.
I have not tried it yet, I only tried to flash recovery from fastboot, and it is failing with the "command not allowed". But maybe I could try to flash some other things ? Any advice ?
For now, despite all my attempts to install stock OTA via dload method, the phone is still trying to boot into lineageOS, and failing.
I came across the "current" firmware version with a check with DC-unlocker : "NEM-L51C432B120"
So I downloaded full OTA firmware b120 on firmware finder software, and the dload method worked !
The installation went well, and after a few minutes of the first boot, I got into phone configuration.
I have one last problem, though : the phone configuration is looping.
There is only 4 languages to choose, so I have to choose english(US), then there is a weird list of countries, none in the EU, where I feel i have to choose united states, then after some steps I have to register to huawei ID thing.
If I try to skip it, it loops to the language selection.
If I try to log in to my original account, it says "device not supported for your location" and then loops to languages. (my original account is in french/France)
If I try to create a new account with new address mail, it works but then at the end says again that "device not supported for your location" and then loops to languages.
I tried with other countries it still loops.
The other languages seems to be Chinese and Japanese, but the configuration is looping too if I choose them.
I tried with/without sim, with/without wifi connected...
Dload the next firmware now and see if it works. Then set the phone
I downloaded and installed with dload method (by removing sd card and copying directly on it the files, because I don't know how to have access to the phone internal & external memory now) the next firmware (b130 version)
The phone booted, it launched a "system optimization" that was a few minutes long, and then the EMUI configuration poped up and looped through language selection, region(country), wifi connection (successful), terms and conditions, and WLAN+(switch between wlan and mobile data automatically).
I feel like the phone is working, the notification led is even blinking when I receive sms, but I have access to nothing because of this damned configuration.
Note: the connection to huawei ID isn't prompted again in the loop once I log in, from the original or the new account. In order to be prompted again to log in to the huawei ID, I have to go to erecovery and reset to factory the phone.