Guys, I'm just sharing this topic to help maintain this ROM in our forum.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
About
MoKee OpenSource is based on the Google AOSP. We update our source code frequently to keep up with the latest development, and not forgetting to merge in special features of our own at the same time.
A small group of people from around the world who are interested in Android launched this project on the 12th of December 2012, and is committed to make this ROM better and better. Like most contributors of open source projects (Omni, CyanogenMod, Slim AOSPA etc), we are doing all these in our free time as our passion…
Since this project is open source, anyone interested can participate in the development (maintain new devices, contribute code etc). Newcomers are always welcomed!
Read here for developer application: http://www.mfunz.com/en/developer-application, you can host your unofficial MoKee builds on our server!
Features:
http://www.mokeedev.com/en/about/
Downloads:
https://forum.xda-developers.com/showpost.php?p=71850531&postcount=2
Changelog:
https://forum.xda-developers.com/showpost.php?p=71850535&postcount=3
Gapps recommended
http://opengapps.org/
Installation mode :
To install the clean rom:
Download the rom
enters recovery
Wipe data, system, cache, FORMAT DATA and factory reset.
choose zip from rom and install
Big Thanks @Razziell for development
Original post: https://4pda.ru/forum/index.php?showtopic=794653&st=1880#entry60121736
ROM OS Version: 6.0.1 Marshmallow
ROM Firmware Required: TWRP
Based On: CyanogenMod, AOSP
Source code: https://github.com/Razziell
Version Information
Status: Nightly
Created 2017-04-09
Last Updated 2017-04-18
Downloads:
0409 https://yadi.sk/d/lB1-xT243GopTa (via Razziell's cloud)
or
https://openload.co/f/Mj8tKc-v6SU/MK60.1-markw-20170409-UNOFFICIAL_by_Razziell.zip (mirror)
0418 https://yadi.sk/d/HukIxVoA3H7vtP (via Razziell's cloud)
or
https://openload.co/f/MeWAb6CHxg4/MK60.1-markw-20170418-UNOFFICIAL.zip (mirror)
TWRP
https://drive.google.com/file/d/0B7E6QNkm7vA0LWhxNW1NRmhNbEE/view @brigudav (4pda)
https://openload.co/f/Vx5F8RKlk_c/twrp-3.0.3-0-markw.img (don't remember, pls tel me if sb know)
DT2W enabler on EBBG:
Info: https://forum.xda-developers.com/showpost.php?p=72005625&postcount=89
https://openload.co/f/gYvYNSeJWpQ/DT2W-markw_EBBG_Mokee.zip
Changelog:
04.09
Do not reload in the recovery from the extended menu (turn off the phone and hold down the volume +/-, then press the power and release everything after the vibration).
If only the maximum frequencies are used, the CPU should be put on charge (preferably to the maximum) and restart the phone
In search of others
Glad to see this! Thanks a lot! One question only, this will be my first custom ROM to my Redmi 4 Prime... When you say: "All wipes" you mean all all? internal storage too? Sorry for that dumb question, but i'm new on this.
Regreats!
Mangel79 said:
Glad to see this! Thanks a lot! One question only, this will be my first custom ROM to my Redmi 4 Prime... When you say: "All wipes" you mean all all? internal storage too? Sorry for that dumb question, but i'm new on this.
Regreats!
Click to expand...
Click to collapse
System, data, cache and dalvik for sure, never wipe internal storage unless you sure have microsd in its slot and you install rom from it
what is this used for?http://cloud.tapatalk.com/s/58f05fc23d19f/Fix_media.zip
Inviato dal mio Redmi 4 Prime utilizzando Tapatalk
dels07 said:
System, data, cache and dalvik for sure, never wipe internal storage unless you sure have microsd in its slot and you install rom from it
Click to expand...
Click to collapse
thanks a lot for the answer. Another noob question... do you prefer this Mokee ROM rather than MIUI 8.2? I'm undecided if change this last one or not. Is there any bug?
Thanks a lot in advance
Mangel79 said:
thanks a lot for the answer. Another noob question... do you prefer this Mokee ROM rather than MIUI 8.2? I'm undecided if change this last one or not. Is there any bug?
Thanks a lot in advance
Click to expand...
Click to collapse
I always prefer custom roms if available, my favorite is Slimrom (which sadly noy available cor R4P). Most current build of Mokee and LOS considered stable with minimal hiccups.
You can always do system backup in TWRP before you install this rom and restore if you find its not suitable for your taste.
Mangel79 said:
Glad to see this! Thanks a lot! One question only, this will be my first custom ROM to my Redmi 4 Prime... When you say: "All wipes" you mean all all? internal storage too? Sorry for that dumb question, but i'm new on this.
Regreats!
Click to expand...
Click to collapse
Updated.
I currently have installed mokee rom:
MK60.1-markw-20170403-UNOFFICIAL
can I flash this thread's mokee update on top of that without full wipe?
DryEagle said:
I currently have installed mokee rom:
MK60.1-markw-20170403-UNOFFICIAL
can I flash this thread's mokee update on top of that without full wipe?
Click to expand...
Click to collapse
You can, simply install from the recovery update and install the gapps afterwards.
Okay, and is 0409 version have fixed lockscreen password? in 0403 version, if you set lockscreen password more than 8 letters long, the phone doesn't save it right and you can't log in at all, have to go to twrp and delete password file...
DryEagle said:
Okay, and is 0409 version have fixed lockscreen password? in 0403 version, if you set lockscreen password more than 8 letters long, the phone doesn't save it right and you can't log in at all, have to go to twrp and delete password file...
Click to expand...
Click to collapse
I use a pin and fingerprint, I do not use passwords and never checked it.
Razziell said:
I use a pin and fingerprint, I do not use passwords and never checked it.
Click to expand...
Click to collapse
Ah, well now you know. I have test every password length from 4 to 13 letters... 4,5,6,7,8 work ok, 9,10+ the phone just tells you 'incorrect password' when you go to lockscreen, no matter what you try - i tested typing it in with letters cut off so it's 8 long, doesn't work. It just doesn't save it correctly at all. have to go to twrp and delete the password files in /data/system to remove lockscreen and log in again. So, this is something to fix for next version :good:
DryEagle said:
Ah, well now you know. I have test every password length from 4 to 13 letters... 4,5,6,7,8 work ok, 9,10+ the phone just tells you 'incorrect password' when you go to lockscreen, no matter what you try - i tested typing it in with letters cut off so it's 8 long, doesn't work. It just doesn't save it correctly at all. have to go to twrp and delete the password files in /data/system to remove lockscreen and log in again. So, this is something to fix for next version :good:
Click to expand...
Click to collapse
For me, this is not a priority, it will be time to try to find a solution.
Laos has such a problem?
Hi,
After flashing this rom, can't get into recovery - tried to flash it from adb - still doesnt work. Any ideas?
garyfisher88 said:
hi,
after flashing this rom, can't get into recovery - tried to flash it from adb - still doesnt work. Any ideas?
Click to expand...
Click to collapse
do you even read first post carefully?
do not reload in the recovery from the extended menu (turn off the phone and hold down the volume +/-, then press the power and release everything after the vibration).
Click to expand...
Click to collapse
Razziell said:
You can, simply install from the recovery update and install the gapps afterwards.
Click to expand...
Click to collapse
Ok, I updated to 0409 today. It was kinda complicated (probably because of encryption). When I try to flash in twrp, it install halfway, then give error 7, /system in use or busy. I go to reboot, phone is just stuck on mi logo. After 2 more boots into twrp, I finally log in twrp without encrypt password, then do 'decrype data' from menu, and after that it let me flash it ok. Very strange. At least all my apps etc are still installed, didnt have to do anything but a few strange steps to flash the update :good:
---------- Post added at 18:30 ---------- Previous post was at 18:00 ----------
BTW now that call recorder is included, can we get an option for all calls to be automatically recorded, like miui used to do? Or must we pick it manually for every single phonecall?
DryEagle said:
BTW now that call recorder is included, can we get an option for all calls to be automatically recorded, like miui used to do? Or must we pick it manually for every single phonecall?
Click to expand...
Click to collapse
Only manually or by third-party applications.
It must be difficult for Razziell to keep answering questions in 4pda and xda also xD
One Question for Razziell have you uploaded your own modified Kernel?I
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
"MoKee OpenSource is the biggest non-profit Android Open Source development team in China, with members from all parts of the world. We follow the latest development from Google closely and improve various parts of Android according to the users’ habits. Being a non-profit organisation, we utilise our spare time and own funds to keep this passion alive. Therefore, the costs for the forum and servers are solely beared by us. In order to provide a good user experience, we only included a few preinstalls in the ROM. Along with the advertisements in the forum; we hardly get enough to pay for the bandwidth. The point is, those are our only source of income, however many developers choose to exclude them when releasing unofficial builds. Unlike CyanogenMod, we did not accept monetary help at the early stages, as in China, most people do not understand the meaning of “making a donation”. They would think of it as buying a service, which is conflicting with our objectives.
Anyways, we still made it until today, and even started to provide third party developers a chance to utilise our OTA system. All of these are the fruit of our hard work and passion. We are proud of the happy users, and we are also proud of the support given to MoKee OpenSource. Most importantly, we are proud of the improvements we have achieved all these while, and the advancements never stop."
IMPORTANT INFORMATIONS:
I didn't make this rom, this have official support from mokee (Build not this thread, If developer want me to get down this thread feel free to do and please accept my apologize in advance)
WHAT MAKES THIS ROM SPECIAL:
- Extremely smooth.
- Battery usage is very good
- Perfect support for lossless music, and enhance the stability of the video hardware.
- Optimized camera with fast focusing speed
- Multiple languages.
- Wakelock blocker added to the smart control setting.
USING TIPS:
1. To capture screen shots: simultaneously press the volume down + power buttons for 2 seconds to achieve.
2. Change the weather location: add desktop weather widgets, and custom location, click to confirm.
3. The developer mode is hidden by default, you need to open Settings > About phone, click on the version number for 5 times.
4. Double tap on status bar to turn screen off.
FLASHING GUIDE:
Coming from another ROM:
1. Install custom recovery (TWRP recommended)
2. Copy custom ROM zip file to sd-card (internal/external)
3. Boot into recovery mode
4. Now select wipe
5. Advance wipe & select system, data, dalvik cache, cache
6. Now, swipe to wipe
7. Select install & select custom rom zip
8. Install success
9. Now install gapps (optional)
10. After installing gapps, wipe cache & dalvik cache
11. Reboot
12. That's all folk's, enjoy custom ROM
Upgrading to a new update:
Just flash without wiping.
DOWNLOADS:
RELEASE (Stable)
NIGHTLY (Less stable but new feature,fix)
History (5.1.1)
Xposed:
Xposed thread
Install APK file.
Flash ZIP file via Recovery
Open Xposed.
Slow-motion camera app :
https://drive.google.com/file/d/0B2F...FjQnRPQ2c/view
Download and install it like a normal apk.
Credits:
Mokee team !
Please help official mokee 6.0.1 and cm13 6.0.1 bootloop
supreme01061 said:
Please help official mokee 6.0.1 and cm13 6.0.1 bootloop
Click to expand...
Click to collapse
Which device ?
Clean or dirty flash ?
i9506 clean flash
supreme01061 said:
i9506 clean flash
Click to expand...
Click to collapse
Hmm which version you installed ?
Weird for me it worked with no problem
MK60.1-ks01lte-160905-RELEASE.zip this version
---------- Post added at 11:50 PM ---------- Previous post was at 11:48 PM ----------
cm13 official also bootloop
So it come from your side... can't help much
Do I need to flash stock rom before flashing this one, or can I flash it on Resurrection Remix?
And how's battery life in comparison to RR?
Siemko said:
Do I need to flash stock rom before flashing this one, or can I flash it on Resurrection Remix?
And how's battery life in comparison to RR?
Click to expand...
Click to collapse
You need to make a full wipe !
3lambda said:
You need to make a full wipe !
Click to expand...
Click to collapse
Do you support E330?
TonyTeoTeo said:
Do you support E330?
Click to expand...
Click to collapse
Hmm I guess you'll have problem like sound not working but I'll can try to make a flashable zip
Is this ROM based on CM13. several screens please
netwolfs said:
Is this ROM based on CM13. several screens please
Click to expand...
Click to collapse
Nope it's based on aosp
Look on internet for screen
It look like a normal aosp rom
3lambda thanks for help!
When I use the CM13 I have the following bug - when I speak on the phone, screen is off from the proximity sensor, but the hardware buttons remain active. Is this ROM have such a problem
netwolfs said:
When I use the CM13 I have the following bug - when I speak on the phone, screen is off from the proximity sensor, but the hardware buttons remain active. Is this ROM have such a problem
Click to expand...
Click to collapse
I don't have this problem on cm so you have to test it yourself
3lambda said:
Hmm I guess you'll have problem like sound not working but I'll can try to make a flashable zip
Click to expand...
Click to collapse
Thank you but you dont have to do that, i flashed it and everything worked well without sound prob.
Battery life is good too. I am happy with live and ambient display as well.
trapped in the startup logo , gt i9506 , full wipe install rom install gapps , wipe wipe cache and reboot nothing dalvik
nick more said:
trapped in the startup logo , gt i9506 , full wipe install rom install gapps , wipe wipe cache and reboot nothing dalvik
Click to expand...
Click to collapse
Which version you flashed ?
3lambda said:
Which version you flashed ?
Click to expand...
Click to collapse
RELEASE (Stable)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP is known by everyone as Ice Cold Project that started on Desire HD and since then evolved into a mature ROM with the BEST community you can find!!!
Until Lollipop, the rom has always been AOKP based. Unfortunately, since AOKP either stopped development or will make a comeback later this year, we changed our base to CM when it comes to hardware, drivers and some features.
If there are any bugs, either we will sort them or CM team if it concerns their modifications. This rom isn't CM supported so no need to report errors or bugs to them!!
Click to expand...
Click to collapse
Code:
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
Flash procedure:
1. Make sure that you are running my CM build or the CM build by Meticulus
2. Remove all registered fingerprints
3. Reboot into TWRP
4. Do a Factory reset
5. Flash the AICP build
6. Flash Gapps (I suggest Open Gapps,use the arm64 packages)
7. Reboot
8. Profit
DOWNLOAD
XDA:DevDB Information
AICP, ROM for the Huawei P9 Lite
Contributors
The Marionette, Meticulus, XePeleato, surdu_petru
Source Code: https://github.com/Meticulus
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Beta
Created 2016-12-02
Last Updated 2016-12-02
Reserved
WORKING/NOT WORKING
-same as CM
Bugs?
How to delete the fingerprint
Does everything work or are there any bugs?
Raymen03 said:
How to delete the fingerprint
Click to expand...
Click to collapse
Settings > Lockscreen > Fingerprint > *Click on your registered fingerprint in the options* > Delete > *click OK*
Thijs van Hal said:
Does everything work or are there any bugs?
Click to expand...
Click to collapse
Simply put,it has the same bugs as CM(the 2.1MP cam limit and that is that?)
The Marionette said:
Simply put,it has the same bugs as CM(the 2.1MP cam limit and that is that?)
Click to expand...
Click to collapse
How about Bluetooth paring?
Care to elaborate on the difference between this and CM?
Hi,
I have a few questions:
1: Does this work on any P9 Lite variant (i have VNS-L21)?
2: Why is archive so big (almost 700mb)?
3: What Open Gapps package do you recommend to flash?
Tnx
tw1st3d ?
tw1st3d83 said:
Hi,
I have a few questions:
1: Does this work on any P9 Lite variant (i have VNS-L21)?
2: Why is archive so big (almost 700mb)?
3: What Open Gapps package do you recommend to flash?
Tnx
tw1st3d ?
Click to expand...
Click to collapse
1. Yeah,I declared the L"X"1 value to say that it is compatible with both L31 and L21.
2. AICP is "fatter" than CM since it has extra features,so no reason to panic. :silly:
3.I personally use the Pico package and then just install other Google apps which I need. That is the beauty of Open Gapps,you have several options.
Sent from my VNS-LX1 using Tapatalk
The Marionette said:
1. Yeah,I declared the L"X"1 value to say that it is compatible with both L31 and L21.
2. AICP is "fatter" than CM since it has extra features,so no reason to panic. :silly:
3.I personally use the Pico package and then just install other Google apps which I need. That is the beauty of Open Gapps,you have several options.
Click to expand...
Click to collapse
Thanks man for fast answer, the flashing will comence in the morning, i need a straight head for this ?
And sa for archive size i did not panic, just been curious because i had AICP on my galaxy s4 and it was half the size...
AICP rom is one of the best out there and it has sooo much customization options that i almost cry with happyness when i saw this post ?
And one more question: do i use ARM or ARM64 version of gapps?
Huawei P9 Lite have to use ARM64
Potato997 said:
Huawei P9 Lite have to use ARM64
Click to expand...
Click to collapse
Yeah,I thought everyone knew that...
Added it as well to the instructions! xD
@The Marionette thanks for this amazing work. There is some possibility that you can support the VNS-L23 variant? It is practically equal to the L31, with the only differences that do not have NFC support, the bands 4G are different and it has 2GB of RAM. Greetings.
Hey @The Marionette,
I flashed the ROM and i got error that data partition could not be mounted and then when i click to boot in to android the phone boots but it ask for password to start android...
What to do?
EDIT: After rebooting recovery the data partition is mounted again and i did a full wipe then flashed rom and gapps again but after boot in to android it ask for password again...
tw1st3d83 said:
Hey @The Marionette,
I flashed the ROM and i got error that data partition could not be mounted and then when i click to boot in to android the phone boots but it ask for password to start android...
What to do?
EDIT: After rebooting recovery the data partition is mounted again and i did a full wipe then flashed rom and gapps again but after boot in to android it ask for password again...
Click to expand...
Click to collapse
Someone on the question and answer thread had the same problem. See if any of his answers helps.
Sent from my Huawei P9 Lite using XDA Labs
oss_mosis said:
@The Marionette thanks for this amazing work. There is some possibility that you can support the VNS-L23 variant? It is practically equal to the L31, with the only differences that do not have NFC support, the bands 4G are different and it has 2GB of RAM. Greetings.
Click to expand...
Click to collapse
I have the L21 variant and it works fine for me. If CM works on your device,AICP will work as well.
tw1st3d83 said:
Hey @The Marionette,
I flashed the ROM and i got error that data partition could not be mounted and then when i click to boot in to android the phone boots but it ask for password to start android...
What to do?
EDIT: After rebooting recovery the data partition is mounted again and i did a full wipe then flashed rom and gapps again but after boot in to android it ask for password again...
Click to expand...
Click to collapse
Did you follow the instructions or did you do it your own way?
Are you coming from stock?
I think everyone needs to be on CM before flashing.
I flashed it exactly like I described and it booted.
The only downside is that the TWRP goes red(thinks the current ROM is stock) and data can't be mounted. I will look into it.
Sent from my VNS-LX1 using Tapatalk
The Marionette said:
I have the L21 variant and it works fine for me. If CM works on your device,AICP will work as well.
Did you follow the instructions or did you do it your own way?
Are you coming from stock?
I think everyone needs to be on CM before flashing.
I flashed it exactly like I described and it booted.
The only downside is that the TWRP goes red(thinks the current ROM is stock) and data can't be mounted. I will look into it.
Sent from my VNS-LX1 using Tapatalk
Click to expand...
Click to collapse
I followed Meticulus instructions first (did all backups and dump) and then i followed your instructions from OP but i come from stock rom, did not try to install Meticulus CM ROM... So now i managed to get past password screen by formating data partition to FAT and then formating it back to ext4 but now when phone boot i get "Decryption unsuccessful" screen and when i click "reset phone" button it reboots in recovery, wipe cache and then boots up back to "Decryption unsuccessful" screen...
I am downloading now Meticulus build to try with that... Will report back soon...
EDIT: I managed to boot AICP!!! By doing this:
First i updated recovery (did not see that Meticulus pushed V2) then i flashed Meticulus CM build but i got "Decryption failed" screen again but this time when i clicked "reset phone" buton the phone just rebooted to TWRP.
Then i did again full harcore wipe and flashed CM with open gapps and the phone booted in to system without problem, from that point i figure that AICP must work now so i rebooted back to TWRP, did another hardcore full wipe, flashed AICP with Open Gapps micro ARM64 version and the phone finaly booted to AICP :happy: :happy: :happy:
Btw i noticed few thing while doing all this... When i first booted CM my SIM card was not recognized but i figured it needs some time to get the signal or wathever but that never hapend and i cheked camera app and in setting of the app i saw that front and back camera was set to full resolution and the photo i took was really in full (13Mpix) resolution... After checking that and few more things i flashed AICP and at first boot my SIM still not working so i figure i will reboot and after second boot the SIM works again but in this ROM front and back camera are set to 2.1mpix (not a problem for me, just saying for ppl to know)...
Now i am going to play with this awesome ROM!
Thanks @The Marionette
EDIT 2: So after few hours of playing with AICP i been forced to go back to stock because my mobile network gone crazy, every 5-10 minutes it disapear and only reboot helps to get connected again and when network disapears the UI get so much lag that is almost unusable...
I can confirm that other things in ROM work as it should, fingerprint, themes, sound bar, navigation bar customization, lcd density, UI animations customizations etc...
Nice work and keep up the good work! ?
So I am running this ROM on my device since yesterday and I really like it. Seems very stable and allows for a lot of modifications.
It drains a lot of battery while listening to music when the device is locked but I also experienced this on the CM ROM.
I am keeping it on my device for now and am looking forward to new updates
Hello @The Marionette,
May I ask you if you plan to update the AICP ROM with the update from CM? Thank you
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
What's working :
nearly everything
What's not working ( due to no kernel source ) :
Live Display is software only
Ambient Display is disabled
Missing vibration intensity preference
F2FS
Sometimes fingerprint sensor not work(turn off the screen and turn on to fix it)
Temporary device specific changes :
This fixes the multi touch issue:
https://review.lineageos.org/#/c/166416/
device tree:
https://github.com/thune-xiaobai/android_device_xiaomi_capricorn/tree/cm-14.1
vendor tree:
https://github.com/thune-xiaobai/android_vendor_xiaomi_capricorn
Instructions :
Download the latest build and gapps
Reboot to recovery
Flash the latest build and gapps
Reboot
Downloads :
Builds : https://drive.google.com/file/d/0B_SYQSdSx0sqRkJZbXVWS01idTA/view?usp=sharing
Root addon : https://download.lineageos.org/extras
Google Apps : http://opengapps.org/
XDA:DevDB Information
capricorn, ROM for the Xiaomi Mi 5s
Contributors
xiaobai112220
ROM OS Version: 7.x Nougat
Version Information
Status: Testing
Created 2017-03-28
Last Updated 2017-03-28
thanks for make thread rom, downloading now, will give report soon
Yay[emoji120]
Skickat från min MI 5s via Tapatalk
Thank you for all your work and for sharing it. This is highly appreciated!
thanks so much for creating a thread.
any news on the source kernel release state?
ps: can you add a donation button for your profile?
fyi: installed the latest version over the 122 Build with wiping dalvik chache after, works properly without any bootloops.
I have a weird bug... on every startup the Alarm (set for the next morning) starts ringing. This was the case on the 311 build for me as well.
Some (dumm) questions to clarify...
Hey,
i was following the discussion in the other thread - also a big thanks from my side and a really cool!
Questions:
1) I don´t really get the comment to the multi touch problem. Yes there is a link but do i need to actively flash something after installing latest build? Or does it mean there is a work around integrated with the last build with the specific code from the link.
So: Yes - you still need to flash something for multiply touch support OR No - all is good for now just flash it!
2) Sorry, just want to be sure - Google Apps: ARM64 Version right?
Yes right ARM64 / No, its wrong
3) If it happens that there will be also a official Linage OS buid, can i just flash it than without wipe/reset the phone or do i have to install it new? I know we cant say it jet but:
A) You will need to wipe - for sure!
B) Likely you will not need to wipe.
C) It is absolutly open and nobody has a Glas-Ball to find out jet, so 50/50
4) What is "Live Display is software inly" - i could not find out what is meant with "Live Display" via Google excatly. Sorry if it is a dumm question.
Thanks so much for making this development possible. Hope my questions are not too dumm ones and fast and easy to answer.
Sebastian - Greetings from Yangon! Got my Mi5s for only 268 Euros here ( 4/128GB) 400000Kyts
Hey there!
Everything works as expected (camera bug is still there - as expected), the rest is flawless.
Thanks for all the hard work!
Please (I keep requesting this), could you (or somebody else contributing to the build) add the hardware button switching option (using the already working script from @ru1dev) ? It would be great to have it embedded in the ROM. I am sure many people want to use the Nexus/Pixel/Stock navigation experience (back, home, recents button order).
There seems to be a "bug" in all these builds: Pixel icons (from Open Gapps) don't seem to work (they do in other ROMs based on @xiaobai112220 's sourcetree). Maybe I'm just doing something wrong... don't know - but I can live with that.
Thanks a bunch! Keep up the good work!
Install in progress....
Wastman86 said:
Hey,
i was following the discussion in the other thread - also a big thanks from my side and a really cool!
Questions:
1) I don´t really get the comment to the multi touch problem. Yes there is a link but do i need to actively flash something after installing latest build? Or does it mean there is a work around integrated with the last build with the specific code from the link.
So: Yes - you still need to flash something for multiply touch support OR No - all is good for now just flash it!
2) Sorry, just want to be sure - Google Apps: ARM64 Version right?
Yes right ARM64 / No, its wrong
3) If it happens that there will be also a official Linage OS buid, can i just flash it than without wipe/reset the phone or do i have to install it new? I know we cant say it jet but:
A) You will need to wipe - for sure!
B) Likely you will not need to wipe.
C) It is absolutly open and nobody has a Glas-Ball to find out jet, so 50/50
4) What is "Live Display is software inly" - i could not find out what is meant with "Live Display" via Google excatly. Sorry if it is a dumm question.
Thanks so much for making this development possible. Hope my questions are not too dumm ones and fast and easy to answer.
Sebastian - Greetings from Yangon! Got my Mi5s for only 268 Euros here ( 4/128GB) 400000Kyts
Click to expand...
Click to collapse
No/Yes/B or C/Live display feature on settings
Today's version is very fluid and very stable. Thank you 谢谢! I can only imagine that you will make a perfect Lineage firmware once Xiaomi releases the kernel source code for Mi5s. :fingers-crossed:
You did it, now i can like my mi5s. We will feedback any issues and it's going to be great. Thank you for taking the time and doing it.
I was waiting for this thread for too long, thank you for making it and sharing a new build. I really appreciate your work. Good job.
nice job!
Installing this version later today! Thanks for your work @xiaobai112220!
Enviado desde mi MI 5s mediante Tapatalk
Installing today ! All work fine.
Just a little issue on boot : date is 06/10/1970 during 3s before syncing with my network.
Fingerprint not working - rest looks very good!
Hey, just tested the rom - like it!
I have one bug:
When trying to set up fingerprint sensor for unlocking from lock screen, the wizard/app always crashes. So i was not possible for me to set up a fingerprint to unlock the device.
Anybody has the same experience or is it only me ?
Thanks for the rom again!
Wastman86 said:
Hey, just tested the rom - like it!
I have one bug:
When trying to set up fingerprint sensor for unlocking from lock screen, the wizard/app always crashes. So i was not possible for me to set up a fingerprint to unlock the device.
Anybody has the same experience or is it only me ?
Thanks for the rom again!
Click to expand...
Click to collapse
Hi @Wastman86, I set up four fingerprints during the initial settings configuration without problems. I've tried right now to set up another fingerprint and it works fine ?
Maybe you forget to wipe cache/dalvik after flashing the ROM...
llaumgui007 said:
Just a little issue on boot : date is 06/10/1970 during 3s before syncing with my network.
Click to expand...
Click to collapse
I'm not the only one: https://jira.lineageos.org/browse/REGRESSION-145?attachmentViewMode=list
WarioNeila86 said:
Hi @Wastman86, I set up four fingerprints during the initial settings configuration without problems. I've tried right now to set up another fingerprint and it works fine
Maybe you forget to wipe cache/dalvik after flashing the ROM...
Click to expand...
Click to collapse
Ok interesting.
I did a wipe before i installed the ROM but not after.
It should make no difference to clear the old "files" from the previously ROM before or after flashing the system partition, right? I might be wrong though...
Sebastian
Introduction
LineageOS 14.1 designed and built for MI MAX 2
Click to expand...
Click to collapse
Images
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(Click "Screenshots" on top left for more)
Click to expand...
Click to collapse
Downloads
MOD EDIT Download removed
Click to expand...
Click to collapse
Installation instructions
Just like any device flashing using TWRP, before which you need xiaomi oem unlocking
Unlock bootloader >> && install TWRP
Boot into TWRP recovery by holding Volume Up
Download ROM file in your PC, transfer ROM file to phone with MTP access
Wipe -> Wipe data if it was not LineageOS 14.1
Install -> select ROM file you just download, swipe to flash
Click to expand...
Click to collapse
Features
MIUIv5 like navigation buttons haptic feedback
Brevent (formerly "Prevent Running") integrated
Clean, no bloatware
Click to expand...
Click to collapse
Warning: Although this is designed for Max 2, this project is in Beta test status.
Warning: Brevent (which was "Prevent running") is built into this ROM. For any IME or Tasker like app that need foreground running, remove the app from Brevent.
Donation
Consider donate to the author to get this ROM better
Paypal.com or QQ: [email protected]
Alipay Donate:
Click to expand...
Click to collapse
The kernel in this ROM is taken from stock rom. No source released by Xiaomi O.E.M. yet
XDA:DevDB Information
android_device_xiaomi_oxygen, ROM for the Xiaomi Mi Max 2
Contributors
xuefer
Source Code: https://github.com/xuefer/android_device_xiaomi_oxygen
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
Based On: LineageOS
Version Information
Status: Testing
Current Beta Version: 1005
Beta Release Date: 2017-10-05
Created 2017-07-11
Last Updated 2017-10-05
This project is still in develop. Donate if you like this project
Current buggy/non working:
MI SIM not working (no idea how to support it)
What's working/fixed
Display color fixed, disabled color profile while keeping other SDM effects
WiFi fixed. MAC address need fixed
Bluetooth
headphone-jack
Phone calls
Phone IMS setting won't crash any more
RIL stable, thanks to getting rid of MI3TD special changes
SMS
Dual SIM/LTE
LED/Lights, HAL driver written (modified source from MI3 TD), but LineageOS support 256 levels only
Touch, Vibration, Sensors
Fingerprint fixed
packed firmware into lineage_oxygen_*.zip (firmware need to match blobs version)
WIP status (not published yet)
Infra-red
Sorry for the delay. I was busy with my house and the device was given to my dad. I'll try to fix Bluetooth issue. for any boot loop issue, please really provide log like i describe in one of the reply
Thank you for the donation
ChangeLog:
1005:
0826:
adds widevine drm
0823:
0811:
fixes for goodix fingerprint sensor
fixes white led-blink (custom brightness is N/A for blinking, limited by kernel)
removes fingerprint no longer map as dpad center button
DPI reset to 480 (default) instead of the real-world value. fix play store app compatibility issue
Nobody can try it, because there isn't a Download Link?
Bugs? VoLTE? Battery life? Camera quality and errors?
Please share the Download link.
Thanks
Thought place holders where against the rules.
Nice to see some work on the Max 2 though..
Sent from my MI MAX 2 using Tapatalk
Skorpi58 said:
Nobody can try it, because there isn't a Download Link?
Click to expand...
Click to collapse
JayBee89 said:
Please share the Download link.
Thanks
Click to expand...
Click to collapse
Thanks for your attentions. I've post the download link, but be aware that this is in non-working state, not for daily use
xuefer said:
Thanks for your attentions. I've post the download link, but be aware that this is in non-working state, not for daily use
Click to expand...
Click to collapse
Thank you for download link!
And what exactly is NOT working? Or you mean just various possible bugs?
Akemdwr said:
Thank you for download link!
And what exactly is NOT working? Or you mean just various possible bugs?
Click to expand...
Click to collapse
Thanks for asking. I've added status on #2
If I am on official global ROM, I need — Advanced wipe, wipe: dalvik, cash, data, system; or just wipe data?
And after flash will be TWRP still working, so I can return to backup without PC?
Sorry if my questions are a little nubish, my previous devise was sony, on 5 android, nougat and xiaomi are still complicated for me.
Nice seeing Lineage coming, thanks Xuefer.
Won't install until wifi/bluetooth/sound works, but I'm already excited
hayatesan said:
Nice seeing Lineage coming, thanks Xuefer.
Won't install until wifi/bluetooth/sound works, but I'm already excited
Click to expand...
Click to collapse
what about "RIL get restarted periodically" :cyclops:
wifi(with correct mac)/bluetooth done
ear-piece/speaker doesn't work for now but all other seems fine, including sound over bluetooth, sound over Wireless Display
it's really hard to track things down, took me hours to get each problem fixed. let's hope if someone donate
Great work.:good:
it looks good
Guess who I am
Iceplumepasses said:
Guess who I am
Click to expand...
Click to collapse
Our beautiful sister.:laugh:
Trying this many thanks!
Btw is there an official development thread or is this it?
cobram3 said:
Trying this many thanks!
Btw is there an official development thread or is this it?
Click to expand...
Click to collapse
it depends on what you mean by "official"
I made both this ROM and this thread, yes, official
for LineageOS: since there's no kernel source release by xiaomi, i guess it won't be accepted by LineageOS
for other independent work on same goal, there is, however comes with bloat-ware, can be found on miui.com thread
I hope this becomes official and maintained / developed.
Akemdwr said:
If I am on official global ROM, I need — Advanced wipe, wipe: dalvik, cash, data, system; or just wipe data?
And after flash will be TWRP still working, so I can return to backup without PC?
Sorry if my questions are a little nubish, my previous devise was sony, on 5 android, nougat and xiaomi are still complicated for me.
Click to expand...
Click to collapse
you need to:
back up data if you want
wipe cache if you want
wipe data is required (which also wipe dalvik-cache)
to flash back MIUI, restore data (or wipe data), flash MIUI full zip
as of now this version: do NOT auto reboot, do NOT reboot using GUI button. hold hardware button key for a few seconds so it power off, then power on, you're good to go, wait a few minutes for the initial boot
Last Update 17.7...Download Link 12.7..??????
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
RevengeOS is an operating system based on Android Open Source Project, built with a unique look and performance in mind. It's daily usage ready, lightweight and elegant.
FEATURES
RevengeOS exclusive features:
- Battery health checker
- Brand new RevengeUI, built to be different, built to be elegant
- Brand new media controller
- Systemwide gradients
- New lock screen clock styles
General features:
- In call haptic-feedback
- Kill app button
- Toggle battery percentage in status bar
- Resume media from Quick Settings
- Playback control from volume buttons
- Wake up with volume buttons
- Quick camera launch from sleep
- 3-button navigation system
- Pill navigation system
- Swipe to screenshot
- Wake on charge
- Proximity sensor check when waking up
- Systemwide sensor block
- And so much more!
DOWNLOADS
Lenovo Z6 Protap herehttps://download.revengeos.com/download/zippo/https://download.revengeos.com/download/zippo/
INSTALLATION
- Boot into your recovery
- Wipe system, vendor, data, dalvik-art cache, cache
- Flash RevengeOS build
- Optional: flash FlameGApps
- Reboot
- Optional: flash Magisk (if you want to root your device as well) (it's recommended to flash Magisk post first boot)
Important: Hi guys, I'm posting this message to talk about RevengeOS, yeah you already know that project so why I'm talking of it?
It's because I wanna talk about the developers of the project.
There are just 3 developers that hard worked everyday for you, with optimization, exclusive UI, volume panel, etc.
They want to make this project more and more exclusive, they want to improve everything.
And lastly, they want that their users be happy while using it.
But there is a problem, 3 developers can't do much.
So, I'm here to ask if you - if you're a developer, and if you want to join us, we have the following requirements:
- Knowledge on Android and Java
- Desire to innovate together the project
- Be mad
Email: [email protected]
DONATE
XDA:DevDB Information
RevengeOS 4.0, ROM for the Lenovo Z6 Pro
Contributors
Lucchetto00
ROM OS Version: 2.3.x Gingerbread
Version Information
Status: Alpha
Created 2020-09-15
Last Updated 2020-11-23
Amazing work... So fast!
Lucchetto00 said:
ROM OS Version: 2.3.x Gingerbread
Click to expand...
Click to collapse
I believe you need to update this :highfive:
P.S. Thanks for getting Android 11 for our device so fast
P.S. Eagerly waiting for Revenge OS 4.0 for x2
Lucchetto00 said:
[First boot will take few minutes! Have patience]
Click to expand...
Click to collapse
few minutes: means - how long?
cool
magisk core missing how to activate it?
When flashing the ROM and other files after reboot it stays on the revenge OS loading logo for a very long time i mean its been 2 hours. i tried re-flashing but to no avail, i was on the Chinese ROM version 11.5.381. the instructions state a few minutes....
Any help is appreciated.
Do Not flash that magisk . its causing bootloop .
just flash rom+gapps it boot under 5min
Quick Guide Please
Anarchy16 said:
Do Not flash that magisk . its causing bootloop .
just flash rom+gapps it boot under 5min
Click to expand...
Click to collapse
Am on ZUI 11.5.381, what are the quick steps to upgrade to RevengeOS 4.0 without the hassle of reboot.
thanks...
kkarungu said:
Am on ZUI 11.5.381, what are the quick steps to upgrade to RevengeOS 4.0 without the hassle of reboot.
thanks...
Click to expand...
Click to collapse
its a custom rom . so u need to;
1) flash twrp recovery & reboot to recovery
2) format data, type yes & reboot recovery again
3) wipe cache, dalvik, system & data (do not tick vendor)
3)flash rom + gapps
4)reboot
note: all your personal data will be wipe so backup before proceed
Anarchy16 said:
its a custom rom . so u need to;
1) flash twrp recovery & reboot to recovery
2) format data, type yes & reboot recovery again
3) wipe cache, dalvik, system & data (do not tick vendor)
3)flash rom + gapps
4)reboot
note: all your personal data will be wipe so backup before proceed
Click to expand...
Click to collapse
Did all 4 steps, thanks...
TWRP gave me hell when installing RevengeOS 3.2, kept getting this error; this package is for "zippo" devices; this is a Zippo. Found bug & used TWRP twrp-3.4.0-1-zippo-mauronofrio.img to get it right.
Installed RevengeOS & gapps..
now stuck at RevengeOS logo for like 15 minutes...
could it be coz I flashed Magisk?? saw your warning way after...
If it doesn't boot up in another 10 minutes, will repeat the process..
---------- Post added at 08:30 PM ---------- Previous post was at 07:35 PM ----------
kkarungu said:
Did all 4 steps, thanks...
TWRP gave me hell when installing RevengeOS 3.2, kept getting this error; this package is for "zippo" devices; this is a Zippo. Found bug & used TWRP twrp-3.4.0-1-zippo-mauronofrio.img to get it right.
Installed RevengeOS & gapps..
now stuck at RevengeOS logo for like 15 minutes...
could it be coz I flashed Magisk?? saw your warning way after...
If it doesn't boot up in another 10 minutes, will repeat the process..
Click to expand...
Click to collapse
Formatted DATA again, worked like a charm, am in....
Download link is offline
antonyc828 said:
Download link is offline
Click to expand...
Click to collapse
https://drive.google.com/file/d/1N3FcHtTzdAJgF84h6MVyEt2iFQ1LHX43/view
this one is latest . 061020 build
Guys my lenovo Z6 pro freeze about 2 sec when i play ahard games like genshin impact and other and keep doing this all the time any one help me fix it..
And i be thankfull
Does anyone have working a mod ZUI Camera?
I am facing a bug. I can't turn any security feature on, password, pin, fingerprint, cant register any of them. The error says the setting app keep closing.
sunny907 said:
I am facing a bug. I can't turn any security feature on, password, pin, fingerprint, cant register any of them. The error says the setting app keep closing.
Click to expand...
Click to collapse
It is not ROS bugs . You'll have to start from scratch to fix it . Flash 11.5.381 using qfil, boot it up, dont set any pass . Then flash recovery & install rom+gapps like usual
Okay, will try that. But, I was already on 11.5.381 when I flashed the ROS and gapps. So, not really sure why this won't happen again.
sunny907 said:
Okay, will try that. But, I was already on 11.5.381 when I flashed the ROS and gapps. So, not really sure why this won't happen again.
Click to expand...
Click to collapse
When on zui, dont set any pass
Anarchy16 said:
When on zui, dont set any pass
Click to expand...
Click to collapse
Do I have to remove my pins/passwords/fingerprints or just disabling them would do?
Thanks!