Database Develop

Stock Recovery to TWRP

Dear xda_users,xda_devs
Greetings .
I am using HTC one M7 UL . I have downloaded 3 gb of updates from OTA. as I was not using it from 2 years, it upgraded from 2.xxx -> 7.xx i.e Sense 6 and Android 5.0 , In between update process I flashed cwm (TWRP is not working ,idk why, fastboot boot recovery command is also not working),and figured out that when i try to install OTA it fails , some check sum or signature failure was there .
And when i flashed a stock recovery from my phone my phone was kind of soft reset , and it went to version 2.xxx . So I have to download all the updates again, which I did , now my question is how can I make a nandroid backup without flashing custom recovery , as if I flash a custom recovery after updating . 1. I download update , it wont install from OTA. 2. I used by backup which i created from cwm it will restore my phone to that date . but cwm will be also recovered , so My point of backup will be useless.
Conclusion :- I need to install updates from OTA , plus I need root as well ( Sadly fastboot boot recovery.img is not working ). I am having no issues with custom recoveries but I have to install OTA .And also why my phone get reset when I flashed my stock recovery , it didnt happened in cwm or TWRP or philz
In seek of help
Thanking You
rahulnegi1409

I need help 😞

i flash stock MOB31E rom using official TWRP 3.0.2.2 after i flash it my boot recovery was gone and only appeared is broken android with exclamation point

Can your device boot? maybe it replaced twrp with stock recovery, try flashing twrp again
Good Luck?

avie14 said:
i flash stock MOB31E rom using official TWRP 3.0.2.2 after i flash it my boot recovery was gone and only appeared is broken android with exclamation point
Click to expand...
Click to collapse
Probably your device's recovery replaced by stock recovery.
Inorder to prevent this , you shouldve uncheck mount system read-only.
Anyhow, now you can still root your phone and install a custom recovery with a tool!
if you wish I'll link it here!
BTW, your device isn't booting now?

Pls its ok to me but i dont have a pc

sachin n said:
Probably your device's recovery replaced by stock recovery.
Inorder to prevent this , you shouldve uncheck mount system read-only.
Anyhow, now you can still root your phone and install a custom recovery with a tool!
if you wish I'll link it here!
BTW, your device isn't booting now?
Click to expand...
Click to collapse
Its still booting no stock recovery and custom recovery

twrp recovery stock

please i have xperia z model c6602
i flashed twrp recovey twrp-3.0.2-0-yuga.img from fastboot then my phone keep booting at twrp recovery i tried restart many times but no chance
rest factory from twrp and not working also
any help please ?

can anyone answer, same case with me?

Hey guys, did you fix this? And if yes, how?

You can't flash recovery on stock ROM that way because after that the ROM will not boot. I think now you have to either flash stock ROM again via Flashtool or flash any custom one using recovery you have installed.

[SOLVED] c5502 5.1.1 Stuck on black blank screen, Unlocked bootloader, No recovery!

Hello Xperia ZR users,
I had dual recovery i flashed RR M and RR N rom's in a single day. the next day i restored stock rom which i have backup approximately 5.30 gb it took so much time to boot whole 60 percent charging had been gone so i flashed stryflex mm rom for sony look but again i thought to use stock rom so this time i restored stock backup rom through otg pendrive because my external storage got write permissions problem when i installed stryflex! but now also same happened device taking so much time to boot and i thought to flash rr nougat but i wiped everything through dualrecovery and i removed battery as dualrecovery not showing anything in otg pendrive now there is also no recovery available to flash anything!
Xda user Robin guided me to flash stock rom through firmtool but ended with errors in xperia firmtool log file!
So now i am having black blank screen! no recovery unlocked bootloader! i had installed adb drivers through flashtool drivers and also installed other universal adb drivers but pc is not showing my device in adb devices list in command prompt! My device is showing in Device manager as ADB interface! when i connected my phone through fastboot mode !
Please help me!
SOLUTION : If u are using custom roms and want to go back to stock rom 5.1.1 ?! and while flashing are u experiencing blank screen after a successful flash through flashtool or experiencing any errors in flashtool while flashing?! Well there are two methods to flash stock roms! Successfully!!
Method 1 : whatever the custom rom you are in! Just flash the stock 5.1.1 rom in your phone through flashtool but with other pc! Yes other pc, pc with no drivers installed regarding adb! Try out your friends laptop or pc! Don't forget to install flashtool, fastboot and your xperia model drivers through flashtool drivers exe file! which is located in c drive!! Also install adb setup file that install all drivers all over pc! And just flash the stock 5.1.1 rom through flashtool! There are 99.99999% chance that stock rom will be successfully flashed in your phone! If this doesn't work!! It's your bad luck and its definitely pc problem not your phone! Then just follow method 2 to flash the rom!
Method 2 : flash the twrp img through flashtool (use any flashtool version!) by entering into fastboot mode and select flash the kernel option and select the twrp img file in your pc (i mean u have to download the twrp 3.0.3 img and use it ! ) twrp will be successfully installed in ur phone and then flash the stock jellybean 4.1.2 version the download link is available below! it is an ftf file convert the ftf file into zip file and then flash through recovery! that's it u will be booted to stock jb firmware and it will ask to factory reset on first boot press yes option it will take few minutes and then it will be booted to jb rom!! restore drm keys if u have the backup and update the os through xperia companion!! or else flash the 5.1.1 zip through recovery!
Note: only flash the jb rom i tested flashing kitkat it doesn't worked!
Stock jellybean firmware Link:
https://forum.xda-developers.com/showthread.php?t=2384512
PRFCreator tool:
https://forum.xda-developers.com/crossdevice-dev/sony/tool-prfcreator-easily-create-pre-t2859904

I uploaded a flashtool log file ! Please help!!

Delta solution
I was also stuck with same error, I Banged my head in all forums with all rookie answers.
Why this problem occurs?
Ans: Because the user has installed Marshmallow or Nougat ROM on Lollipop. Even if you try to
come back on Lollipop stock, it won't accept the TA partition and won't go further (Although CM 10/11/12/13/14 or ASOP 10/11/12/13/14 RR-M/N WORKS without ERROR, but I assume user is hungry for STOCK 5.1.1 LOLLIPOP).
So, what's the solution, either you need backup of your TA partition OR - and if you haven't like me. Nothing to worry. You just need Stock JellyBean ROM (THIS IS IMPORTANT).
My solution will 100 percent work (Its Brahmastra ).
Step 1) download https://forum.xda-developers.com/showthread.php?t=2384512
Step 2) download flash tool version which is mentioned in the above link , I used 0.9.11. Version 0.9.19.8 is HELL - You will never succeed with this version)
Step3) flash... Even if you encounter error [17] no worries, if no error, still no worries (If you get error after TA partation is done...you are through, if you encounter before TA partition, it is worrisome)
Step 4) fastboot -i 0x0fce oem unlock 0xxxxxxxxxxxxxxx69
Step 5) fastboot flash boot boot. Img (twrp or PhilZ recovery) or STEP 8)
Step 5) download customized 5.1.1 by chippa
Step 6) goto TWRP (Recovery) and install customized , NO CMW recovery
Step 7) beer for me, go to STEP 10
Step 8) use flash tool to install C5502_10.7.A.0.222_1273-5765_R1E
Step 9) It boots after 3 sec
step 10) go to step 7 (beer loop mode)
If you go to SONY service centre, those M*F* will say, your screen is damaged, because once you push power button, it vibrates and goes to blank screen.
OR
You have locked your bootloader and you simply need to unlock the bootloader in ( STEP 4 ) and you will start with normal BOOT procedure.
How to unlock the bootloader?
Ans: http://www.cyanogenmods.org/forums/topic/unlock-bootloader-android-phone-using-fastboot/
OR
Relock bootloader (boot), then unlock bootloader (boot the device)
Cheers,
Dr. Lamda

Ok man thanks for your help! I am really surprised that someone gave me the solution! Well, i think i repaired my device! I don't know exactly what i did was correct or wrong few days before i installed a universal adb driver that repaired the driver in pc although there was an existing adb driver! And then i installed an old adb setup because i found that new adb not works sometime! And then through flashtool ver 0.9.23. something , i flashed the twrp 3.0.3 img by fastboot mode it installed successfully! And then i just flashed a rr nougat rom through recovery. I seen so many errors while wiping and flashing rom and gapps! But phone rebooted successfully! After that i see that selinux is set to enforcing rr nougat rom and i can't go to recovery mode so i same flashed twrp img through flashtool but it only rebooting to twrp i pulled off battery and booted again it was successfully booted to ROM!
Hey! Can i flash customised 5.1.1 through recovery ?! as now i am in nougat !

sandeepxperia said:
Ok man thanks for your help! I am really surprised that someone gave me the solution! Well, i think i repaired my device! I don't know exactly what i did was correct or wrong few days before i installed a universal adb driver that repaired the driver in pc although there was an existing adb driver! And then i installed an old adb setup because i found that new adb not works sometime! And then through flashtool ver 0.9.23. something , i flashed the twrp 3.0.3 img by fastboot mode it installed successfully! And then i just flashed a rr nougat rom through recovery. I seen so many errors while wiping and flashing rom and gapps! But phone rebooted successfully! After that i see that selinux is set to enforcing rr nougat rom and i can't go to recovery mode so i same flashed twrp img through flashtool but it only rebooting to twrp i pulled off battery and booted again it was successfully booted to ROM!
Hey! Can i flash customised 5.1.1 through recovery ?! as now i am in nougat !
Click to expand...
Click to collapse
Yes! you can go back to 5.1.1 by the above procudure

If you want to revert back from RR - N to stock firmware then use flashtool-0.9.18.4 and first flash stock 4.4.4 firmware/ boot then flash stock 5.1.1 firmware.

Lλmdα said:
Yes! you can go back to 5.1.1 by the above procudure
Click to expand...
Click to collapse
so i can flash the customised 5.1.1 rom by chippa through twrp recovery, right?

moly.maji , i love u brooooooo with your help what i did was i downloaded a jelly bean 4.1.2 rom and flashed through twrp 3.0.3 recovery by converting the ftf file to zip file (thanks to my other bro xda member robin for telling the info about prf creator pc software tool that converts ftf to zip) and it was successfully booted to jellybean stock rom !
and i am saying to whoever facing to flash the stock rom after updating the device to custom roms to prevent any errors to return to stock 5.1.1 firmware while flashing through flashtool it may be driver related errors in pc or any error just use the flashtool for flashing the twrp img! only by going to fastboot mode and then select flash the kernel option through that select the twrp img that's it within seconds the twrp will be installed in your phone and through twrp recovery flash the jellybean 4.1.2 rom ! i tested flashing kitkat but failed! so flash only jellybean rom!! that's it your phone will boot to jb rom and then if u have backup of drm keys restore and update the os through xperia companion or flash the 5.1.1 rom through recovery that's it !!

my device cant be detected and refused to go into fastboot or Recovery mode
is there any way?

Galaxy A6+ unable to install ROM Stock by ODIN

Hello friends, I've been trying to fix a giant problem with my son's cell phone for three days ... He asked me to rotate it, but I brickee it, I comment on what happens and what I did:
specs:
Glaxy A6 + (SM-A605GN)
1-install TWRP by ODIN (Correct installation)
2-Install TWRP files "force_encryption_disabler, RMM State Bypass and non-verity-opt-encrypt (I think here is my mistake, since I do not know the functions of these files, in my time of Flasheo does not exist) I take it out of this tutorial: androidinfotech.com/root-samsung-galaxy-a6-plus-2018-sm-a605f-fn-gn-pie/[/url])
Error 3-First; I didn't have access to the internal memory in the TWRP, so I followed this tutorial youtube.com/watch?v=bqyVQCGlyqs[/url]) to change the partition system so I could access the internal memory correctly
4- Install the Magisk correctly through the TWRP
5- Restart (And my hell began) ...
a- TWRP informs me that I did not have OS installed on reboot
b- When restarting the screen it tells me: Set guarantee bit: Kernel (in yellow)
c- Try to install the Firmware Stock by Odin, but I can't, it doesn't throw me an error, but it doesn't install anything at all, IT KEEPS ME THE TWRP INTACT
d-Download a Modified ROM, the installation by TWRP and it was installed correctly, but the SIM card does not work (I assume it is because it has a different modem) and I get an error for almost everything L
I want to go back to the Stock ROM but ODIN does nothing ... Please I need your help.
I can access Download and TWRP mode.
discuss the translation ...

Friends, any ideas ?? ... any help is appreciated.

As you already flashed twrp, so i think you know how to go download mode. Just see any youtube video how to flash stock rom on s8/s9. Download your latest firmwere from sammobile or samfrew and flash. Procedure is same as s8 or s9.

tutul2336 said:
As you already flashed twrp, so i think you know how to go download mode. Just see any youtube video how to flash stock rom on s8/s9. Download your latest firmwere from sammobile or samfrew and flash. Procedure is same as s8 or s9.
Click to expand...
Click to collapse
Friend, that's the problem, ODIN doesn't let me install the Stock Rom, at the end of the flash process with Odin, the phone remains intact (with the TWRP intact)

DARKSIDERS_2012 said:
Friend, that's the problem, ODIN doesn't let me install the Stock Rom, at the end of the flash process with Odin, the phone remains intact (with the TWRP intact)
Click to expand...
Click to collapse
What kind of error? or it flashes perfectly? Give us something.. Photo of odin and your phone's download mode screen...

When you first time booted twrp, you needed to click on wipe > format data. This will decrypt your phone (and it wipe your internat storage) then you can flash rmm and no verity. After that, click on reboot > recovery and then reboot > system (or flash magisk). Recommended to flash latest rmm and no verity.