I have enabled developer mode, enabled ADB debugging, but on the PC I get no permissions. Tried rebooting and disable/enable a few times. The watch never asks to grant the PC permissions. Tried two different PCs.
I know something is happening, the cable is working, because if I enable/disable ADB alters the "no permissions" to "nothing found".
ADB debugging off:
Code:
adb devices
List of devices attached
ADB debugging on:
Code:
adb devices
List of devices attached
604KPBF037869 no permissions
Edit: solved, I had to kill adb and restart it then worked.
Related
When I try to run ./adb devices or ./adb shell it always says device not found. Yes USB debugging is turned on too. I'm on a mac also.
chron12 said:
When I try to run ./adb devices or ./adb shell it always says device not found. Yes USB debugging is turned on too. I'm on a mac also.
Click to expand...
Click to collapse
Mac might be your problem. Have you made sure your drivers are installed correctly?
If you just let it auto-install drivers, try finding a manual download online.
Tivo7 said:
Mac might be your problem. Have you made sure your drivers are installed correctly?
If you just let it auto-install drivers, try finding a manual download online.
Click to expand...
Click to collapse
no need to install drivers on a mac. what mode is you phone in. Try both PC Mode and Charge only...I had a few dab problems myself...so much that I restored it back to stock..which fixed all of them. I am set up on a mac and use a little batch file to show and hide hidden folders, then I dropped adb into /bin folder so I didn't have to keep putting the ./ in front of dab.
-Try killing adb in activity monitor, then retyping adb devices...if that doesn't work,
- have you tried resetting your computer too? Mine weirds out every now and again and a restart fixes dab
Good suggestions, however,you can stop the adb service with adb kill-server
Try typing just adb by itself to get a list of options
Sent from my DROID BIONIC using xda premium
MY ADB has stopped Working
It happened after Installing the CWM And TWCR
Well What happened it was saying ADB was outdated while installing but it installed CWM and TWCR
Now if i enable ADB in the phone the windows doesnt read that there is a mobile nor anything detected not even charging
When i disable ADB I can see my phone charging and i can transfer files
I don't know what to do and I am very worried ...
Hope If any1 could help...
Tried installing ADB drivers and the Android SDK .. No luck
I think the problem is in the phone as it doesnt allow me to connect to the PC with ADB on
I read this http://forum.xda-developers.com/showthread.php?t=1917741
and found that ro.debuggable=0 in the Deafult.prob While it is enabled ...
And there is a question too how can i backup it so if i eddit it and get a bootloop I want to be able to restore using CWM or TWCR
John98Zakaria said:
MY ADB has stopped Working
It happened after Installing the CWM And TWCR
Well What happened it was saying ADB was outdated while installing but it installed CWM and TWCR
Now if i enable ADB in the phone the windows doesnt read that there is a mobile nor anything detected not even charging
When i disable ADB I can see my phone charging and i can transfer files
I don't know what to do and I am very worried ...
Hope If any1 could help...
Tried installing ADB drivers and the Android SDK .. No luck
I think the problem is in the phone as it doesnt allow me to connect to the PC with ADB on
I read this http://forum.xda-developers.com/showthread.php?t=1917741
and found that ro.debuggable=0 in the Deafult.prob While it is enabled ...
And there is a question too how can i backup it so if i eddit it and get a bootloop I want to be able to restore using CWM or TWCR
Click to expand...
Click to collapse
Can you use adb over other computers?
Also, try ADB over network. Goto Settings > Developer Options and turn "ADB over network" on. If prompted with a warning, press OK. Then you will see an ip address with a port number under ADB over Network setting. Now open cmd (or Terminal in Linux) and cd to the directory where the ADB files are present. Then type
Code:
adb connect <ipaddress>
Of course, replace <ipaddress> with the ip that you see in the Developer Options under ADB over network. It should be something like "192.168.1.2:5555", enter the whole thing. Then see if you are successfully connected by typing
Code:
adb devices
.
If you are using windows go to control panel and look for "hardware" or more specifically "drivers". It is somewhere there, just look around and you will find it. Then enable adb and connect phone. Then Select your device name from the list and right-click and select appt. drivers.
ayushag96 said:
Can you use adb over other computers?
Also, try ADB over network. Goto Settings > Developer Options and turn "ADB over network" on. If prompted with a warning, press OK. Then you will see an ip address with a port number under ADB over Network setting. Now open cmd (or Terminal in Linux) and cd to the directory where the ADB files are present. Then type
Code:
adb connect <ipaddress>
Of course, replace <ipaddress> with the ip that you see in the Developer Options under ADB over network. It should be something like "192.168.1.2:5555", enter the whole thing. Then see if you are successfully connected by typing
Code:
adb devices
.
If you are using windows go to control panel and look for "hardware" or more specifically "drivers". It is somewhere there, just look around and you will find it. Then enable adb and connect phone. Then Select your device name from the list and right-click and select appt. drivers.
Click to expand...
Click to collapse
Thanks for the reply I can't use ADB anywere ..
The phone doesn't even appear in the PC with ADB debuging enabled not even a connected sound or anything ..
I tried Wifi Kontect on the playstore as I didnt find "ADB over Network" But ADB wont connect....
Any Other solutions ... I dont mind if i have ADB over wifi the important thing is to have any ADB connection
www .mediafire .com/convkey/fb15/db3ykaaldgkqsd66g.jpg?size_id=5
www .mediafire .com/convkey/93e0/49f47ps6s9nbeyj6g.jpg
Remove spaces so you can see the images I cant post links yet
Fixed
I have fixed my probem thanks to @sijav !
Installing
http://forum.xda-developers.com/showthread.php?t=1687590
Fixed everything ! even after un-installing the app
the device is not found however I installed the drivers and I am using windows 7 I tried it with another computer and it didn't work
and it works with the recovery I want it to work to gain s-off
RedBlackPellet said:
the device is not found however I installed the drivers and I am using windows 7 I tried it with another computer and it didn't work
and it works with the recovery I want it to work to gain s-off
Click to expand...
Click to collapse
check FAQ#2: http://forum.xda-developers.com/showpost.php?p=52135024&postcount=2
nkk71 said:
check FAQ#2: http://forum.xda-developers.com/showpost.php?p=52135024&postcount=2
Click to expand...
Click to collapse
I tried with different devices laptops and mobiles and I always get device not found and different adb sdks
RedBlackPellet said:
I tried with different devices laptops and mobiles and I always get device not found and different adb sdks
Click to expand...
Click to collapse
if your booted into a rom, do you have usb debugging enabled ?
its in system, developer options, if you cant see developer options then goto about - software information - more - and tap build number 7 times, it will count down and eventually say you are now a developer, you should now see developer options in your system menu.
when you enable usb debugging and plug your phone into the computer.....eventually.....and sometimes it takes a while, you will get a pop up on your phone saying your computer wants to connect to this device, allow or deny, I suggest you allow.
if you don't get the message, then with the phone still plugged into the computer, open developer options again and disable usb debugging, then enable it again.
Seanie280672 said:
if your booted into a rom, do you have usb debugging enabled ?
its in system, developer options, if you cant see developer options then goto about - software information - more - and tap build number 7 times, it will count down and eventually say you are now a developer, you should now see developer options in your system menu.
when you enable usb debugging and plug your phone into the computer.....eventually.....and sometimes it takes a while, you will get a pop up on your phone saying your computer wants to connect to this device, allow or deny, I suggest you allow.
if you don't get the message, then with the phone still plugged into the computer, open developer options again and disable usb debugging, then enable it again.
Click to expand...
Click to collapse
Ofcourse i even tried different devices and cables and I always get device not found and simetimes device offline
RedBlackPellet said:
Ofcourse i even tried different devices and cables and I always get device not found and simetimes device offline
Click to expand...
Click to collapse
im at a loss, sorry I couldn't help any further, but if its doing it with different devices, it has to be a software issue, especially as you say its working in recovery and bootloader, the only thingf I picked out from your picture is it states your adb is out of date, but you say you've tried that too, all I can suggest is you try this one.
http://forum.xda-developers.com/showthread.php?t=2588979
also where did you get the drivers from
RedBlackPellet said:
and sometimes device offline
Click to expand...
Click to collapse
reboot PC and phone, use a USB2 port
RedBlackPellet said:
Ofcourse i even tried different devices and cables and I always get device not found and simetimes device offline
Click to expand...
Click to collapse
why are you using an adb shell to push the file? push the file using adb and then enter the shell to chmod the "ff" file (I suppose you are pushing firewater but your renamed the file to "ff" ?) And btw "adb devices" will not output your device ID from an adb shell.
Code:
adb devices
adb push ff /data/local/tmp
then
Code:
adb shell
su ---> [COLOR="blue"]to get a # prompt[/COLOR]
chmod 775 /data/local/tmp/ff [COLOR="Blue"]--> to give read/write/execute permission[/COLOR]
/data/local/tmp/ff
I'm trying to get S-Off, but ADB is unable to communicate with my phone. 'adb devices' shows my phone with an offline status. I'm trying to use Rumrunner, my HBoot is 1.55. I've tried completely deleting Android SDK, restarting, and reinstalling. I've tried uninstalling drivers, restarting, and reinstalling. USB debugging is enabled. However, if I boot into bootloader, 'adb devices' and 'fastboot devices' are both able to identify and access the phone.
From the searching I've done, there's supposed to be a prompt on your phone requesting access for the adb server from the computer, but I haven't received any such prompt. Could the missing prompt be my issue?
Go to developer options on your phone and revoke USB debugging permissions. Also, update your adb to a recent version.
Hello,
I got my phone brand new about 4 months ago. I rooted it and got TWRP installed with no issues. Fastboot and ADB were working fine but now when I try to connect my phone via USB and use ADB I get unauthorized whenever I type adb devices. Typically this happens because your phone is prompting you to allow the computer to have root access but I am not getting that popup window at all.
Things I've tried;
Uninstalled ADB/Updated ADB
Deleted adbkey folder under C:\Users\name\.android
Stopped and Started the adb server again after computer and phone reboot
Deleted ADB_keys folder on android in \data\misc\adb folder on phone itself, followed by a restart
Turning off then back on USB Debugging
Turning off then back on USB Debugging & Developer Options
(Including Revoking USB Debugging Authorizations both times)
Even tried copying the following from PC to phone ~/.android/adbkey.pub inside the /data/misc/adb/adb_keys
Still no luck, I'm not sure why it would just stop working out of nowhere. Nothing has changed since I used it a few months ago.
Also another strange occurrence is that if I turn off USB Debugging / Developer Options then reboot. Once the phone gets to the home screen both USB Debugging and Developer Options are enabled again without me doing it.
Anyone else have a similar issue and figure it out?
vulcanrvn said:
Hello,
I got my phone brand new about 4 months ago. I rooted it and got TWRP installed with no issues. Fastboot and ADB were working fine but now when I try to connect my phone via USB and use ADB I get unauthorized whenever I type adb devices. Typically this happens because your phone is prompting you to allow the computer to have root access but I am not getting that popup window at all.
Things I've tried;
Uninstalled ADB/Updated ADB
Deleted adbkey folder under C:\Users\name\.android
Stopped and Started the adb server again after computer and phone reboot
Deleted ADB_keys folder on android in \data\misc\adb folder on phone itself, followed by a restart
Turning off then back on USB Debugging
Turning off then back on USB Debugging & Developer Options
(Including Revoking USB Debugging Authorizations both times)
Even tried copying the following from PC to phone ~/.android/adbkey.pub inside the /data/misc/adb/adb_keys
Still no luck, I'm not sure why it would just stop working out of nowhere. Nothing has changed since I used it a few months ago.
Also another strange occurrence is that if I turn off USB Debugging / Developer Options then reboot. Once the phone gets to the home screen both USB Debugging and Developer Options are enabled again without me doing it.
Anyone else have a similar issue and figure it out?
Click to expand...
Click to collapse
Go Here and download the Fastboot drivers. follow the directions on the razor dev portal. I had the same issue and this fixed it for me. https://developer.razer.com/razer-p...94.1708481542.1586624574-305520188.1586475530
If your adb-server is not started with root/admin rights, your phone will never prompt you for authorization unless you choose a different USB Mode (MTP, PTP, etc.) than Charge Only. I suspect this is done to prevent certain malicious actions being performed without the user being aware.
If you start your adb-server with root/admin rights (by typing "sudo adb start-server", make sure you've killed your existing daemons before doing so), you can use ADB while in Charge Only mode, provided you've subsequently authorized the PC to do so. However, unlike normal adb server, the fingerprint may occasionally change and you may need to redo the authorization again.