I thnked that I should make a thread where we should share our benchmark results. Why? To see what is the best optimized rom & kernel.
P.S I'm really curious if someone achieved 35.186 points in Antutu Bench, like how it says in HTCMania forum
My results-- Stock EMUI 4.1, B896, no custom kernel
GeekBench 3:
-Single Core: 501
-Multi Core: 2400
GeekBench 4:
-Compute Bench: 1767
CPU Bench:
-Single Core: 552
-Multi Core: 2020
Antutu Bench: 30257
Have you achieved bigger/smaller scores? Leave a screenshot/ or the scores in the comments(reply)
Thanks!
OTHER SCORES:
- @zhaozihanzzh's scores:
Geekbench 4
CPU Bench:
-Single Core: 562
-Multi Core: 2091
- @blewko's scores: ---Open Kirin's LineageOS 13 18/04/17
Antutu: 17158
OpenKirin's OmniRom 6.0
-Antutu: 30998
- @persona78's scores:
Geekbench 4:
CPU Bench:
Single Core: 553
Multi Core: 2066
What are so important about benchmarks? In my experience they do not say much. If I compare this device to the one from my brother, he gets a lot more points. But you DO NOT feel any difference. Not in games and not in overall stability. Calm down a bit.
Those 100 more points you can get with an optimised device won't change anything. That's just stupid thinking.
Benchmarks doesn't mean much, real fps, real stability etc is important... Post 3dmark
(i only tested antutu, it's slightly better than yours)
D1stRU3T0R said:
Benchmarks doesn't mean much, real fps, real stability etc is important... Post 3dmark
(i only tested antutu, it's slightly better than yours)
Click to expand...
Click to collapse
Scores?
My score: https://browser.geekbench.com/v4/cpu/2451945
Honor 4C CHM-TL00H
Sent from my HUAWEI CHM-TL00H using XDA Labs
zhaozihanzzh said:
My score: https://browser.geekbench.com/v4/cpu/2451945
Honor 4C CHM-TL00H
Sent from my HUAWEI CHM-TL0 TL00H0H using XDA Labs
Click to expand...
Click to collapse
Nice. I'll put it at the OP
Lineage os 13 18042017 update
blewko said:
Lineage os 13 18042017 update
Click to expand...
Click to collapse
Ok. Will put in OP
blewko said:
Lineage os 13 18042017 update
Click to expand...
Click to collapse
Wait.....I thought 3d works in Lineages os 18042017 update ??????
HaiderHady said:
Wait.....I thought 3d works in Lineages os 18042017 update ??????
Click to expand...
Click to collapse
I don't know. It might not work, when I had it I didn't test any games, either ran any antutu bench, just geekbench
HaiderHady said:
Wait.....I thought 3d works in Lineages os 18042017 update ??????
Click to expand...
Click to collapse
Not yet, next update should work
HaiderHady said:
Wait.....I thought 3d works in Lineages os 18042017 update ??????
Click to expand...
Click to collapse
Nope.
I have quit EMUI 4.1 and gone back to 4.0.3 B596. Here are some benchmarks I have made:
Geekbench 4:
CPU Bench:
-Single Core: 553
-Multi Core: 2104
Compute bench (done 2 times)
1st time: 1579
2nd time: 1588
Antutu Benchmark: 30563
Gekkbench 3:
-Single Core: 495
-Multi Core: 2320
I have to mention that I am using the same apps and Force MSAA4X and Force GPU Rendering on in developer settings. And stock kernel. I am going to install ESAL V2.1 b2 and post the results.
XTutorials said:
I thnked that I should make a thread where we should share our benchmark results. Why? To see what is the best optimized rom & kernel.
P.S I'm really curious if someone achieved 35.186 points in Antutu Bench, like how it says in HTCMania forum
My results-- Stock EMUI 4.1, B896, no custom kernel
GeekBench 3:
-Single Core: 501
-Multi Core: 2400
GeekBench 4:
-Compute Bench: 1767
CPU Bench:
-Single Core: 552
-Multi Core: 2020
Antutu Bench: 30257
Have you achieved bigger/smaller scores? Leave a screenshot/ or the scores in the comments(reply)
Thanks!
OTHER SCORES:
- @zhaozihanzzh's scores:
Geekbench 4
CPU Bench:
-Single Core: 562
-Multi Core: 2091
- @blewko's scores: ---Open Kirin's LineageOS 13 18/04/17
Antutu: 17158
Click to expand...
Click to collapse
Hi!
The 35.186 score is on Android 5 not in Android 6.
.
---------- Post added at 04:12 PM ---------- Previous post was at 04:00 PM ----------
This is may score on Geekbebnch 4
persona78 said:
Hi!
The 35.186 score is on Android 5 not in Android 6.
.
---------- Post added at 04:12 PM ---------- Previous post was at 04:00 PM ----------
This is may score on Geekbebnch 4
Click to expand...
Click to collapse
mmmmm, android 6 should give more performance,not lose performance. In android 5 for that score was used a patch, kernel or something?
P.S. I'll put your score in the OP
XTutorials said:
mmmmm, android 6 should give more performance,not lose performance. In android 5 for that score was used a patch, kernel or something?
P.S. I'll put your score in the OP
Click to expand...
Click to collapse
Logical is correct but for real you loose performance with Android 6, i don´t don´t way. Is the true! :\
.
NEW SCORES: --Used with EMUI 4.0.3 B596 with ESAL V2.1 Beta 2 Kernel, Intelliplug enabled and its governor performance, processor governor performance too, and Force MSAAx4 and force gpu rendering are enabled in developer options--
P.S. Just to know from now, the result are DISSAPOINTING
Geekbench 3:
-Single Core: 498
-Multi Core: 1600
Geekbench 4:
-Compute Bench: 1609
CPU Bench:
-Single Core: 549
-Multi Core: 1796
Antutu Benchmark: 29881
XTutorials said:
NEW SCORES: --Used with EMUI 4.0.3 B596 with ESAL V2.1 Beta 2 Kernel, Intelliplug enabled and its governor performance, processor governor performance too, and Force MSAAx4 and force gpu rendering are enabled in developer options--
P.S. Just to know from now, the result are DISSAPOINTING
Geekbench 3:
-Single Core: 498
-Multi Core: 1600
Geekbench 4:
-Compute Bench: 1609
CPU Bench:
-Single Core: 549
-Multi Core: 1796
Antutu Benchmark: 29881
Click to expand...
Click to collapse
I told you ESAL will decrease performance on newest roms, this is why we need an updated one, maybe even 3.10.105 kernel with tweaks or 3.10.86 with tweaks
D1stRU3T0R said:
I told you ESAL will decrease performance on newest roms, this is why we need an updated one, maybe even 3.10.105 with kernel with tweaks or 3.10.86 with tweaks
Click to expand...
Click to collapse
Absolutely! I'm going back to stock kernel!
Open Kirin's OmniRom 6.0.1
Related
My Dhollmen kernel.
Galaxy Tab 2 : Marshmallow - AOSP compatible.
Sources in Git-Hub
Credits for Kernel Team, Google, Samsung, Cyanogenmod and anyone else who has worked on it.
Cpu boot at 1216 MHz.
Gpu boot at 384 MHz.
Undervolt.
Boot with 'pegasusq' as cpufreq governor.
Boot with 'sioplus' as block scheduler.
Boot with 'slub' as allocator.
CPU overclock selectable up to 1520 MHz.
GPU overclock selectable up to 512 MHz.
PowerVR SGX 540 kernel modules blob build [email protected]
Activated ZRAM with LZ4 compression
Tweaked Init process.
Android F2 File system (F2FS) support.
Windows NTFS support.
Windows CIFS support.
Unix/Linux NFS support.
Windows exFAT support.
ISO 9660 support.
Manages /etc/init.d/ and /etc/sysctl.conf.
Init's improvements built in kernel.
I think it does not need further sysctl.conf tweaks.
GENERAL NOTES:
Booting pegasusq because it is very soft with frequency scaling and looks as good compromise between performance and battery saving.
Naturally, each user should choose the one that best suits your needs.
This kernel not use and remove, if any when it installs, /system/lib/hw/power.*.so, as they are redundants here and interfere with CPU's
management frequency, increasing eat CPU cycles.
User can insert boot actions by scripts in /etc/init.d. Here, it is important to establish the order of execution starting with numbers script names,
to run always the latter that has the largest number.
Has been included an interface to the OC of the GPU, using "cat /sys/devices/system/cpu/cpu0/cpufreq/gpu_frequency"' command to view current frequency.
Kernel will stop secundary processor when its performance is not necessary for the functioning of the tablet.
Maybe I can tune a little more, but for now the second processor still remain stopped with low power requirement, even the first reaches 600 MHz.
I have further reduced the working voltage used by the Core, GPU, and CPU frequencies up to 1216 MHz.
I have completely replaced the memcopy & memmove functions code for memory data movement. The new code can be up to 10 times faster.
I have lately added several optimizations to improve performance and reduce overhead.
Download Latest releases
MARSHMALLOW VERSION CHANGELOG:
2016.05.16
Possibility of loading several roms.
Removed zram and swap.
Rebuild init.
Several changes designed to increase performance.
Several changes designed to reduce battery consumption.
2016.03.20
Adding dynamic tiler allocation.
2016.03.19
In line with Cyanogenmod at date.
Added the majority of previous improvements.
CHANGES OC OPTIONS BY HAND:
Code:
# GPUFREQ --> X = 1 (384 MHz) || 0 (307 MHz) || 2 (512 MHz)
echo 'X' > /sys/devices/system/cpu/cpu0/cpufreq/gpu_oc
# CPUFREQ --> X = 1216000 || 1008000 || 1360000 || 1420000 || 1460000
echo 'X' > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
# SCHEDULER --> X = row || cfq || sioplus
echo 'X' > /sys/block/mmcblk0/queue/scheduler
# GOVERNOR --> X = pegasusq || interactive || ondemand || lulzactive
echo 'X' > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
WARRANTY: You agree that this product is provided "as is" without any warranty, either expressed or implied, on its operation.
DISCLAIMER: You assumes at your SOLE RESPONSIBILITY and RISK all results produced by the "software" and/or instructions in this thread.
XDA:DevDB Information
KERNEL Dhollmen - AOSP - Espresso Tab2 , Kernel for the Samsung Galaxy Tab 2
Contributors
tuxafgmur
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 20160516
Stable Release Date: 2016-05-16
Created 2014-06-11
Last Updated 2016-05-16
.
This post refers only to previous 2016.03.19 versions
Cpu boot at 1216 MHz.
Gpu boot at 384 MHz.
Undervolt.
Boot with 'pegasusq' as cpufreq governor.
Boot with 'sio' as block scheduler.
Boot with 'slqb' as allocator.
CPU overclock selectable up to 1460 MHz.
GPU overclock selectable up to 512 MHz.
PowerVR SGX 540 kernel modules blob build [email protected]
Last ducati-m3.bin firmware supported.
Without debug code.
SElinux Support.
SNAPPY and LZ4 compression libs for SWAP soported.
Activated ZRAM with LZ4 compression
Tweaked Init process.
Android F2 File system (F2FS) support.
Union File system (AUFS) support.
Windows NTFS support.
Windows CIFS support.
Unix/Linux NFS support.
Windows exFAT support.
ISO 9660 support.
UDF DirectCD and CDRW/DVD support.
Apple HSFS and HSFS+ R/W support.
DIrectories /mnt/mntpoint1, /mnt/mntpoint2 and /mnt/mntpoint3 suitables for your needs.
Battery images replaced.
Manages /etc/init.d/ and /etc/sysctl.conf.
Init's improvements built in kernel.
I think it does not need further sysctl.conf tweaks.
GENERAL NOTES:
Booting pegasusq because it is very soft with frequency scaling and looks as good compromise between performance and battery saving.
Naturally, each user should choose the one that best suits your needs.
This kernel not use and remove, if any when it installs, /system/lib/hw/power.*.so, as they are redundants here and interfere with CPU's
management frequency, increasing eat CPU cycles.
User can insert boot actions by scripts in /etc/init.d. Here, it is important to establish the order of execution starting with numbers script names,
to run always the latter that has the largest number.
With this kernel, the user not need a separate script to run at the end of the boot.
Has been included an interface to the OC of the GPU, using "cat /sys/devices/system/cpu/cpu0/cpufreq/gpu_frequency"' command to view current frequency.
Kernel will stop secundary processor when its performance is not necessary for the functioning of the tablet.
Maybe I can tune a little more, but for now the second processor still remain stopped with low power requirement, even the first reaches 600 MHz.
I have further reduced the working voltage used by the Core, GPU, and CPU frequencies up to 1216 MHz.
I have completely replaced the memcopy & memmove functions code for memory data movement. The new code can be up to 10 times faster.
I have lately added several optimizations to improve performance and reduce overhead.
DhollmenL : Lollipop versions
DhollmenK : Kit-Kat versions
If your Rom have problems after installing kernel, you must install the blobs file.
Download Latest releases
LOLLIPOP VERSION CHANGELOG:
2015.06.28
Included 'lulzactive' governor.
Included Cgroups as requested by Lollipop
A lot of little optimizations.
2015.02.15
Reverted MAG2GA patches
2015.02.13
First LP version
KIT-KAT VERSION CHANGELOG:
2015.06.24
Restored 'lulzactive' governor.
A lot of little optimizations.
2015.01.17
Updated F2Fs driver.
Last Boeffla codec.
Restored Gpu 512MHz overclock.
Google 4.8 toolchain compilation.
Many code optimizations.
2014.10.19
Solves encrypted /data partition mount.
New Fstrim management.
Mokee rom support.
Linaro 4.8.3 compilation.
Several code optimizations.
2014.09.18
Several code optimizations.
2014.08.17
Linaro 4.9 compilation.
Secure futex uptream patches.
Rework F2Fs files system.
Updates exFat file system.
Sio tweak.
VFS, sync, writeback and readahead changes.
Introducing Boeffla codec.
Changes init script for F2Fs support.
A few more improvements.
2014.06.13
Removed blobs from 10th installation file.
New independent blobs file.
2014.06.10
More reduced voltage to 1216 MHz.
More reduced voltage 1460 MHz as proposed by @Shepguessed.
Included blob files.
Included camera's 4.4.3 @Tsjoklat fix.
Multiple optimizations.
2014.04.12
Restored SELinux permissive behavior.
MHL to Hdmi video support.
Adding AUFS support.
Multiple optimizations.
2014.03.20
Strongliy reworked Kit-Kat's roms battery drain issue.
Reworked frequencies governor.
Adding F2Fs support. You still need Rom and Recovery support for this.
Unified my prev JB and KK releases.
Code slightly reduced.
CHANGES OC OPTIONS BY HAND:
Code:
# GPUFREQ --> X = 1 (384 MHz) || 0 (307 MHz) || 2 (512 MHz)
echo 'X' > /sys/devices/system/cpu/cpu0/cpufreq/gpu_oc
# CPUFREQ --> X = 1216000 || 1008000 || 1360000 || 1420000 || 1460000
echo 'X' > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
# SCHEDULER --> X = row || cfq || sio
echo 'X' > /sys/block/mmcblk0/queue/scheduler
# GOVERNOR --> X = pegasusq || interactive || ondemand || lulzactive
echo 'X' > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
Latest for JB-4.3 Roms --> View attachment 2351488
Latest for CM-10.1 Rom --> View attachment 2133681
WARRANTY: You agree that this product is provided "as is" without any warranty, either expressed or implied, on its operation.
DISCLAIMER: You assumes at your SOLE RESPONSIBILITY and RISK all results produced by the "software" and/or instructions in this thread.
Re: [KERNEL] DhollmenCM for P51xx Cyanogenmod 10.1
Thanks man for this... Work freaking awsome love it
Im running blackbean 8
Sent from my GT-P5113 using Tapatalk 2
Big thanks for this, downloading and uploading
Can anyone confirm if this is compatible with BAKED Blackbean 8.0? Running P5100 here.
panda00 said:
Can anyone confirm if this is compatible with BAKED Blackbean 8.0? Running P5100 here.
Click to expand...
Click to collapse
I think so, but you must test by yourself.
No problem if you backup your system first. :angel:
Tab runs great with this kernel (CM 10.1 latest nightly). Thank you op, we need a kernel like this.
Snappy.
tested cm 10.1 M2 your kernel. antutu say to me 7918 point thanks.
Re: [KERNEL 3.0.31] DhollmenCM for P51xx Cyanogenmod 10.1
Thanks!
Verstuurd van mijn GT-P5100 met Tapatalk
I only have one word for you: PERFECTO!!!
thank you!
Hai tuxafgmur, mind to review my github commits: https://github.com/kumajaya/android_kernel_samsung_espresso10/commits/cm-10.1 and https://github.com/kumajaya/android_kernel_samsung_espresso10/commits/cm-10.1-blackhawk ?
ketut.kumajaya said:
Hai tuxafgmur, mind to review my github commits: https://github.com/kumajaya/android_kernel_samsung_espresso10/commits/cm-10.1 and https://github.com/kumajaya/android_kernel_samsung_espresso10/commits/cm-10.1-blackhawk ?
Click to expand...
Click to collapse
I created muy github acount and master repo yesterday morning, and i still can't upload my sources.
I'm very busy now, but I have interest in reviewing yours and yor great work.
Thank you very much four your kind information.
Regards.
tuxafgmur said:
These frequencies, it does not really represent a true overclock, because the CPU is designed to work normally at 1008 and 1200 MHz.
Samsung stays at the bottom of the table and we opted for the top.
Exactly the same applies to the GPU.
Click to expand...
Click to collapse
Can you make for us another version that is true overclock, that means we can select higher frequencies such as 1350, 1400 for CPU and 512 for GPU
Thanks for your great kernel. My device is flying with it. :good:
muoino said:
Can you make for us another version that is true overclock, that means we can select higher frequencies such as 1350, 1400 for CPU and 512 for GPU
Thanks for your great kernel. My device is flying with it. :good:
Click to expand...
Click to collapse
Yes, I can.
First post, please
I don't test this kernel version. If you install this, send me feedback, please.
DhollmenCM-Kernel_20130310.zip with latest CM10.1 seems a bit laggy? CPU is running at 1200, but don't know about GPU clock, was it lowered from previus kernell?
same here. With 1350 MHz. New HOT OC kernel same.
About laggy:
I don't think GPU.
I think in freq governor. I try to reduce battery comsuption.
1) Can you test with antutu and compare with first post image ?
2) Can you do: "echo lulzactive > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor" and test with it?
Thanks in advance
Antutu gets stuck at initializing screen and then my tab reboots
If I change the governor to lulzactive, it's still laggy.
kbal said:
DhollmenCM-Kernel_20130310.zip with latest CM10.1 seems a bit laggy? CPU is running at 1200, but don't know about GPU clock, was it lowered from previus kernell?
Click to expand...
Click to collapse
Same problem old kernel more smooth, stable and no lag.
---------- Post added at 03:46 PM ---------- Previous post was at 03:39 PM ----------
antutu not working on new kernel freezes my tablet i go back your old kernel now.
aquarist said:
Same problem old kernel more smooth, stable and no lag.
---------- Post added at 03:46 PM ---------- Previous post was at 03:39 PM ----------
antutu not working on new kernel freezes my tablet i go back your old kernel now.
Click to expand...
Click to collapse
Version removed.
Working to resolve the issue.
DISCLAIMER
I will not be held responsible for anything that happens to your device after flashing this kernel. If you don't know how to bring your dead device back to life please don't make any modifications and stay with stock MIUI. This is only meant for advanced users.
Features :
-Compiled with Linaro 6.3 TC-
-Based on CAF LA.BR.1.3.6_rb1.12-
-lazyplug Driver-
-CPU U.V-
-Savoca KCAL-
-Quick Charge 2.0-
-Flar2 Wake Gestures-
-Chill/Cafactive/Relaxed Cpu Gov-
-Zen /FIOPS/Maple I/O-
-Frandom-
-Adrenoboost-
-Show CPU Voltages via sysfs -
-Franco Sound Contol-
-Vibration Control Intensity-
-ExFat/NTFS Support-
-Dynamic Fsync v2.0-
-Toggleable Software CRC-
-TCP congestion Algorithms-
-Misc Changes-
Installation:
-Boot Into Recovery-
-Flash Kernel-
-Wipe Cache and Dalvik (Optional)-
-Reboot!-
Download :
https://www.mediafire.com/folder/9ercu86m9b78y/Guyver
Changelog :
http://www.mediafire.com/file/4c1rf6tscrca2kq/Changelog.txt
--------------------------------------------------------------------------------------------------------------------------------------
never post problems without full details of what setup you are using, it's not possible to help that way.
Provide me some logs:
- ADB logcat dump
- /sys/fs/pstore contents
- dmesg dump
--------------------------------------------------------------------------------------------------------------------------------------
* use kernel adiutor for controlling kernel parameters *
For adrenoboost :
use terminal :
echo 1 > /sys/class/kgsl/kgsl-3d0/devfreq/adrenoboost
* 0 for off , 1 for low , 2 for medium , 3 for high *
----------------------------------------------------------------------------------------------------------
Recommended Settings for battery saving :
CPU : Intelli Hotplug ( conservative profile ) max core = 3 , min core = 1
Governor : Chill on Big Cluster & Relaxed on Little Cluster
Touch Boost = off
I/O scheduler: noop @512
GPU : adreno idler : on
Entropy : 512&256
ZRAM : 0MB
ZSWAP: off
Arch Power : on
Dynamic Fsync : off
----------------------------------------------------------------------------------------------------------
Recommended Settings for daily usage :
CPU : Intelli Hotplug ( balance profile ) max core = 5 , min core = 2
Governor : impulse
Touch Boost = on ( for smother experience )
I/O scheduler: Maple @1024
GPU : adreno idler : on
Entropy : 512&256
Swappiness = 0~10 for 3GB ram , 20~30 for 2GB ram
ZRAM : 520MB
ZSWAP: on ( only for 2GB Model )
Arch Power : off
Dynamic Fsync : on
----------------------------------------------------------------------------------------------------------
Recommended Settings for Gaming :
CPU : Intelli Hotplug ( performance profile ) max core = 6 , min core = 4
Governor : ironactive
Touch Boost = off
I/O scheduler: Fiops @1024
GPU : adrenoboost @high / adreno idler : off
Entropy : 512&256
Swappiness = 0~10 for 3GB ram , 20~30 for 2GB ram
ZRAM : 720MB
ZSWAP: off
Arch Power : off
Dynamic Fsync : on
----------------------------------------------------------------------------------------------------------
for enchanced colors use kcal :
saturation intensity = 50
Screen Value = 118
Screen Contrast = 140
--------------------------------------------------------------------------------------------------------------------------------------
Credits:
@TheStrix @Umang96 @nathanchance @frap129 @Yank555-lu @MOVZX
@flar2 @ak @franciscofranco @Grarak @arter97 @myfluxi @neobuddy89 @jollaman999
--------------------------------------------------------------------------------------------------------------------------------------
Contributors:
MEGAX91
Source :
http://uploadboy.com/xel8nch0m0u2/490/zip
Do You know respect ?
I'm not on MIUI sorry but thanks for try to work on our kenzo !
This kernel is awesome!
Fast, stable and I got best performance at games on Guyver kernel :good:
Charging ma is faster than other kernels(2400 ma)
Thanks
MEGAX91 said:
Hi everyone
i need some testers for my new kernel , please test my kernel on RN3 Pro or Special and kindly report your feedback.
Click to expand...
Click to collapse
wrong section i thought...please ask moderator to move your thread to development section.
Pavel Sajjad Khan said:
We've enough good kernels for our device. plz port any good camera apps for cm13 roms if you can.
Seems no one is interested to test your kernel.
Click to expand...
Click to collapse
respect please...
you can try to port any cam app by yourself.
Pavel Sajjad Khan said:
We've enough good kernels for our device. plz port any good camera apps for cm13 roms if you can.
Seems no one is interested to test your kernel.
Click to expand...
Click to collapse
i just want to share my kernel with others , and believe me i'm going to make perfect kernel for MiUi M.M rom.
why would i port any camera app when snapdragon camera & google camera are already available.
* my kernel support all RN3 Pro sensors *
abihary said:
wrong section i thought...please ask moderator to move your thread to development section.
Click to expand...
Click to collapse
i move my thread to dev section as soon as i get enough positive feedbacks on kernel functionality
new version with faster F.P :
https://mega.nz/#!S5BShILb!ANgOO3ZivQnR01xK9fwkRFG2Kh8NJpGTEiHijHpkU1I
MEGAX91 said:
new version with faster F.P :
https://mega.nz/#!S5BShILb!ANgOO3ZivQnR01xK9fwkRFG2Kh8NJpGTEiHijHpkU1I
Click to expand...
Click to collapse
I really like your kernel. Thanks for your hard work :good:
Maple scheduler is great and quickcharge is faster than other kernels please add your best settings to init.d
Thanks again
2.4ghz really usable ? we see the difference in benchmark ?
@TacoNikky
i will add edit_ramdisk script with recommended settings in next version.
@jordandroid64
yes , it's totally stable. ( Antutu Score is between 85K-90K )
wifi doesn't work on xiaomi.eu 6.9.22
jordandroid64 said:
wifi doesn't work on xiaomi.eu 6.9.22
Click to expand...
Click to collapse
i'm using Epic Rom 6.10.27 on my kate , i dont have such problem.
I've seen that you don't have this problem but please try to resolve it
jordandroid64 said:
I've seen that you don't have this problem but please try to resolve it
Click to expand...
Click to collapse
Ok , i look in to it.
On kenzo 6.9.29 everything works. Maybe flashing this kernel over stock kernel solves the problem
Thanks i will try this on my Kate
MEGAX91 said:
i move my thread to dev section as soon as i get enough positive feedbacks on kernel functionality
Click to expand...
Click to collapse
please don't wait until you have enough positive feedback. lets share this kernel on dev section to let other user aware that we have another good kernel choice for this device.
since you have kate, please also add "kate/kenzo" on your title. i am pretty sure thats a lot of kate user would be happy to try this kernel.
regards.
Me test in global 6.11.3, all the sensors could work... thanks :good:
Great improvement... Battery consumption is pretty good for the performance obtained... I like it pretty much...
I am running Mi-Globe 6.11.3... Is better Epic ROM 6.10.27??
Thanks and regards!
PS: Which governor is better? I/O? And any chance of getting FP faster? I tried OP3 yesterday and OMG... FP was 0.01sec
Looks promising, I'll test on later with miui. Could you plan to make a cm version in the future?
Finaly camera of my kate works without problems !
I hope you update this kernel regulary
Presenting my first PIE kernel for our oxygen Device which will right now work for aosp or los based roms.
** PLEASE READ CAREFULLY FLASHING INSTRUCTION OR YOUR DEVICE WON'T BOOT
Changelogs v1:
UPSTREAMED KERNEL TILL 3.18.131
MERGED ALL LATED CAF TAGS :
LA.UM.7.6.r1-03900-89xx.0
LA.UM.7.6.r1-03700-89xx.0
LA.UM.7.6.r1-03400-89xx.0
LA.UM.7.6.r1-03100-89xx.0
LA.UM.7.6.r1-02800-89xx.0
IMPROVED INTERACTIVE GOVERNOR
IMPROVED ONDEMAND GOVERNOR FOR PERFORMANCE
TWEAKED KERNEL FOR MORE BALANCED PERFORMANCE AND SMOOTHNESS
COMPILED WITH LATEST GCC LINARO FOR OVERALL MORE REAL TIME PERFORMANCE
Changelogs v1.1:
Final push for snapdragon 625 to 3.0 ghz
Changelogs v1.2:
NOW CALL VOLUME ON SPEAKER IS FINALLY VERY HIGH AT MIUI LEVEL (OR NEAR).NO NEED TO INCREASE IT USING VIPER OR MOD
ADDED SOUND OPTIMIZATIONS OVERALL SYSTEM WITH BETTER AND HIGH PITCH SOUNDS ..
BALANCED CPUFREQUENCIES UPTO 3 GHZ
Changelogs v1.3:
IMPROVED MORE DIGITIAL GAIN AND SOUND LEVELS
FIRST TIME INTRODUCING HOTPLUGS(GET READY FOR MORE CPU CONTROL AND SAVE BATTERY JUICE):
MSM HOTPLUG
ALUCARD HOTPLUG
INTELLIPLUG
LAZYPLUG
** REmemeber guys if you don't have any idea about hotplugs then dont touch..First read articles and then go ahead.
Changelogs v1.4:
Finally pushed gpu frequecies to 1600 mhz or 1.6 ghz
we have below freqencies now
133
216
400
560
700
999
1200
1600
Changelogs v1.5:
IMproved and tweaked interactive governor
UPdated all prima drivers(lan, wifi etc) to latest caf LA.UM.7.6.r1-03900-89xx.0
Optimized hotplugs(Alucard hotplug recommended for speed)
Changelogs v1.6:
--> added voltage control (for pro)
--> removed hotplugs(for normal users)
From now on pie kernel will be divided in two package
1) For pro users
2) For normal users like me
Pro users will be having pro controls like hotplugs and voltage control
For normal users there won't be much pain.they can the flash and do normal tuning
Changelogs v1.7:
--> reverted back gpu to 1.3 ghz(some users getting screen flicker issue)
Changelogs v1.8:
1) Merged latest caf tag LA.UM.7.6.r1-04000-89xx.0
2) ADDED EXT4 ENCRYPTION
Changelogs v1.9:
--> upstreamed kernel to 3.18.132
Changelogs v3:
--> UPSTREAMED KERNEL UPTO 3.18.134
--> LATEST CAF TAG LA.UM.7.6.r1-04100-89xx.0
Changelogs v4:
--> UPSTREAMED KERNEL UPTO 3.18.138
HOW TO INSTALL :
Just flash latest zip through treble twrp
Download links :
Hardrock pie kernel v1 : https://www.androidfilehost.com/?fid=11410963190603881618
Hardrock pie kernel v1.1 : https://www.androidfilehost.com/?fid=11410963190603881360
Hardrock pie kernel v1.2 : https://www.androidfilehost.com/?fid=11410963190603881720
Hardrock pie kernel v1.3 : https://www.androidfilehost.com/?fid=11410963190603882261
Hardrock pie kernel v1.4 : https://www.androidfilehost.com/?fid=11410963190603882555
Hardrock pie kernel v1.5 : https://www.androidfilehost.com/?fid=11410963190603883921
Hardrock pie kernel v1.6 pro : https://www.androidfilehost.com/?fid=11410963190603886104
Hardrock pie kernel v1.6 : https://androidfilehost.com/?fid=11410963190603886109
Hardrock pie kernel v1.7 pro : https://www.androidfilehost.com/?fid=11410963190603888699
Hardrock pie kernel v1.7 : https://www.androidfilehost.com/?fid=11410963190603888703
Hardrock pie kernel v1.8 pro : https://www.androidfilehost.com/?fid=11410963190603896574
Hardrock pie kernel v1.8 : https://www.androidfilehost.com/?fid=11410963190603896570
Hardrock pie kernel v1.9 pro : https://www.androidfilehost.com/?fid=11410963190603898608
Hardrock pie kernel v1.9 : https://www.androidfilehost.com/?fid=11410963190603898606
Hardrock pie kernel v3 pro : https://www.androidfilehost.com/?fid=1395089523397887960
Hardrock pie kernel v3 : https://www.androidfilehost.com/?fid=1395089523397887959
Hardrock pie kernel v4 pro : https://www.androidfilehost.com/?fid=1395089523397934150
Hardrock pie kernel v4 : https://www.androidfilehost.com/?fid=1395089523397934151
TELEGRAM GROUP LINK :
Guys please join my telegram group for kernel related quarries @hardrock_kernel
t.me/Hardrock_kernel
Credits or Contributors:
@hardrock_Rock83
Kernel source : https://github.com/rakeshraimca/Kernel_xiaomi_oxygen/tree/lineage-16
Donation link : https://www.paypal.me/Hardrock83
Paytm and phonepe : 7010726092 Version Information
Status: Stable
Current Stable Version: V4
Stable Release Date: 2018-12-24
Reserved
grab it guys
Guys plz share feedback for these optimized changes...and also remember to read notes..
Pixel Experience for mi max2 use anntutu V7.1.2 TEST OK.
V1.1
Score:85055
V1.2
Score:85530
V1.3
Score:84171
v1.4
Score: 80100 ~ 83797
v1.5
Score: 84580
emoom said:
Pixel Experience for mi max2 use anntutu V7.1.2 TEST OK. Score:85055
Click to expand...
Click to collapse
Don't go with scores..check realtime performance
Thank you so much friend , so so so happy
Hard_Rock83 said:
grab it guys
Click to expand...
Click to collapse
And are you sure this is final OC TO SD625
coz dude the way you r overclocking the 625 , i think those day is not far when we have 10GHz of SD625 ???
beingtejas said:
And are you sure this is final OC TO SD625
coz dude the way you r overclocking the 625 , i think those day is not far when we have 10GHz of SD625 ???
Click to expand...
Click to collapse
Lol..I just pushed it finally..but that's not just the case..I have optimized kernel fully..games shd perform better like miui stock or even better..
Use alucard or on demand for gaming
Flashed it over havoc build 2, everything seems more responsive and snappy...will report more after an usage of day. Thanks a ton to hardrock, for without you this device will definitely be outdated..
Ok guys, I have added 2.8 ghz orignal speed with all governors working very well...since in 3.0 ghz some governors like interactive, ondemand, interactive pro ..etc locked at 3 ghz and not switching to other frequencies..you can use other governors while I am fixing those glitch governors for 3 ghz or You guys flash super fast optimized v1 2.8 ghz kernel for now...
Guys i added poll, please vote after testing both v1 and v1.1 for considerable amount of time..
1.1 taping on 3.0 ghz its showing 3.0 ghz for 2 seconds and going back to 2.8 ghz. in list 3.0 ghz is showing but taping on that its reversed back to 2.8
ALI [email protected] said:
1.1 taping on 3.0 ghz its showing 3.0 ghz for 2 seconds and going back to 2.8 ghz. in list 3.0 ghz is showing but taping on that its reversed back to 2.8
Click to expand...
Click to collapse
I have seen only ur device having so many issues ..sometimes kali linux, sometimes system not booted ..etc..please try to follow correct steps.
Hard_Rock83 said:
I have seen only ur device having so many issues ..sometimes kali linux, sometimes system not booted ..etc..please try to follow correct steps.
Click to expand...
Click to collapse
:laugh::laugh:
Hardrock Kernel V1.2 change logs :
NOW CALL VOLUME ON SPEAKER IS FINALLY VERY HIGH AT MIUI LEVEL (OR NEAR).NO NEED TO INCREASE IT USING VIPER OR MOD
ADDED SOUND OPTIMIZATIONS OVERALL SYSTEM WITH BETTER AND HIGH PITCH SOUNDS ..
BALANCED CPUFREQUENCIES UPTO 3 GHZ
Download link : v1.2
https://www.androidfilehost.com/?fid=11410963190603881720
Guys make everything lowest in kernel auditor sound section now...and check..every single sound profile is normal..might be echo is gone too...let me know feedback
You did an awesome job my friend
Hard_Rock83 said:
Lol..I just pushed it finally..but that's not just the case..I have optimized kernel fully..games shd perform better like miui stock or even better..
Use alucard or on demand for gaming
Click to expand...
Click to collapse
Am on v1.1 , and it's really awesome. I suggest not to switch back to 2.8 GHz frequency,
Really appreciate this work of yours, too good..
Echo gone completely when we charge the microphone gain to 0 , superb job..
Gaming I didn't checked allot.. but the much I checked is great..
Any other changes in v1.2 other then sound ??
beingtejas said:
Am on v1.1 , and it's really awesome. I suggest not to switch back to 2.8 GHz frequency,
Really appreciate this work of yours, too good..
Echo gone completely when we charge the microphone gain to 0 , superb job..
Gaming I didn't checked allot.. but the much I checked is great..
Any other changes in v1.2 other then sound ??
Click to expand...
Click to collapse
I am very close to in call volume fix since i know where to put my head..we got in call speaker and so many things fixed in sound..just in call volume left..which i am sure able to to very soon..
Wow...
Hard_Rock83 said:
I am very close to in call volume fix since i know where to put my head..we got in call speaker and so many things fixed in sound..just in call volume left..which i am sure able to to very soon..
Click to expand...
Click to collapse
This was the great great Christmas gift from you.. I don't have any words to say, am on havoc and also got my proximity call accept feature there.. with tons of customisation ( still fan of arrow os )
I dont really know what you did with kernel but the battery backup feels like it have 10k mah of battery.. its decreased only 2 percent till now, I was on 82 yesterday 8 pm , :silly:
Do you have any santa claus's hidden Power for increasing battery capacity by kernel lol..
beingtejas said:
This was the great great Christmas gift from you.. I don't have any words to say, am on havoc and also got my proximity call accept feature there.. with tons of customisation ( still fan of arrow os )
I dont really know what you did with kernel but the battery backup feels like it have 10k mah of battery.. its decreased only 2 percent till now, I was on 82 yesterday 8 pm , :silly:
Do you have any santa claus's hidden Power for increasing battery capacity by kernel lol..
Click to expand...
Click to collapse
He's tech-Santa.
Damn. Your love for our Mi Max 2 is surreal! Thank you for another great contribution!
Features:
-OC CPU up to 1.72 GHz
-DC CPU to 200mhz
- Other Twek Is same With Pure Murali Kernel
Notice:
- Flash Kernel In Costum Rom M based flash in Other ROM May make Your Device Failed Boot
-This kernel May Make Your Devices More Hot
But You can fix this with Kernel Audiotor Set Max CPU To default or Lowest frequency
How to flash :
-Reboot Your Phone To recovery
-Flash rolex-CafOcProjecr-xxxxxx-xxxx.zip
-then reboot and enjoy
Download Links :
https://www.androidfilehost.com/?fid=1395089523397965512
If link can't open you can download in Google Drive with this link:
https://drive.google.com/open?id=1CFb0tRC8TvfR3TPGyRl3AA4Ii_zpch_z
Credit:
Thanks Muralivijay For Kernel sources
This Not stable for daily use
Version :V.1
Sorry for my bad English
The kernel looks good ,but why the link can't open......
DetheDy said:
The kernel looks good ,but why the link can't open......
Click to expand...
Click to collapse
I was Test This link is work
And link are update with Gdrive link
DevilUsr said:
I was Test This link is work
And link are update with Gdrive link
Click to expand...
Click to collapse
OK,I will try.
---------- Post added at 02:58 PM ---------- Previous post was at 02:54 PM ----------
I think next time you can Overclock the GPU. Like Ngntdkernel.
DetheDy said:
OK,I will try.
---------- Post added at 02:58 PM ---------- Previous post was at 02:54 PM ----------
I think next time you can Overclock the GPU. Like Ngntdkernel.
Click to expand...
Click to collapse
I will try in next update
[New Updates Pushed]
Changelog
-OC Cpu Up to 1.9Ghz
-OC GPU up to 650Mhz
-Add Hotplug Support(Thanks dandyfarid)
+Add Thunderplug
+Add AlucardHotplug
Links download:
https://www.androidfilehost.com/?fid=1395089523397966294
If links broken use this link
https://drive.google.com/file/d/1DJvgYoESL6MFeNiZAs573mptT9IdzhS9/view?usp=drivesdk
DevilUsr said:
[New Updates Pushed]
Changelog
-OC Cpu Up to 1.9Ghz
-OC GPU up to 650Mhz
-Add Hotplug Support(Thanks dandyfarid)
+Add Thunderplug
+Add AlucardHotplug
Links download:
https://www.androidfilehost.com/?fid=1395089523397966294
If links broken tell me
Click to expand...
Click to collapse
Why I cant open the link every time?:crying:
DetheDy said:
Why I cant open the link every time?:crying:
Click to expand...
Click to collapse
Try open in browser and Or try open Gdrive link
You can apply with najahiii to inherit his kernel, because he hasn't updated it lately.RR os 's kernel is made by him,I think it is good. I also like your kernel.
---------- Post added at 03:12 PM ---------- Previous post was at 03:11 PM ----------
And did you overclock CPU Voltage?
DetheDy said:
You can apply with najahiii to inherit his kernel, because he hasn't updated it lately.RR os 's kernel is made by him,I think it is good. I also like your kernel.
---------- Post added at 03:12 PM ---------- Previous post was at 03:11 PM ----------
Yes if not oc the voltage CPU can't reached overclock
Click to expand...
Click to collapse
Where are you from?
DetheDy said:
Where are you from?
Click to expand...
Click to collapse
Timor Timur
good
Amazing kernel! Seriously, I`ve tried several ones.
Only some things to make this the definite Rolex Kernel:
- Update kernel to 3.18.140
- Add kcal profile
- ZEN I/O
- Westwood TCP
- OC screen refresh rate to 65 hz
- keep overclocking (1.9 GHz is perfect)
Request
DevilUsr said:
Features:
-OC CPU up to 1.72 GHz
-DC CPU to 200mhz
- Other Twek Is same With Pure Murali Kernel
Notice:
- Flash Kernel In Costum Rom M based flash in Other ROM May make Your Device Failed Boot
-This kernel May Make Your Devices More Hot
But You can fix this with Kernel Audiotor Set Max CPU To default or Lowest frequency
How to flash :
-Reboot Your Phone To recovery
-Flash rolex-CafOcProjecr-xxxxxx-xxxx.zip
-then reboot and enjoy
Download Links :
https://www.androidfilehost.com/?fid=1395089523397965512
If link can't open you can download in Google Drive with this link:
https://drive.google.com/open?id=1CFb0tRC8TvfR3TPGyRl3AA4Ii_zpch_z
Credit:
Thanks Muralivijay For Kernel sources
This Not stable for daily use
Version :V.1
Sorry for my bad English
Click to expand...
Click to collapse
We need custom kernel support nethunter for our redmi 4a
Ayoub hd dx said:
We need custom kernel support nethunter for our redmi 4a
Click to expand...
Click to collapse
I will try
[Update Pushed]
Changelog:
Added Oc Refresh Rate '65Hz'
Remove Oc 1,7:1,8:1,9Ghz
Remove Dc
Remove Gpu Oc
Remove Hotplug Support
Change governor by default to Performance Better for gaming:v
Change kernel name to Go green(to remember you safe the world)
Other change and I forget that:v
Source:
https://github.com/muralivijay/android_kernel_xiaomi_msm8917
Download link:
https://mega.nz/#!eyBETKQa!QNsFMWwLl_FxL9U9--3laHdluC_1THSwmBFYprOcCe0
Thanks for:
Muralivijay (muralidharan) for source
Thanks for Use
Mycontact:
https://t.me/DarknessHiddenorg
[UPDATE PUSHED]
CHANGELOG:
Change Default Governor to 'interactive'
Added MSM Hotplug
Added OC CPU Up To 1,8 GHZ Support
ReAdded DC CPU To 200 Mhz Support
ReAdded GPU OC Support Up to 650Mhz
Added Zen io
Added Kcal
OC Slimbus
OC Audio Processing
And Other Tweak
Download Link:
https://mega.nz/#!vz4n0CQD!hp2qV2WuDfy_pX8d-hB37ShLc48C52T4l5Lftnlf92k
Note:
If Flash fail use batik recovery or old twrp
ROM support :
M Based O-P
Treble O-P
Android Q (treble) (Experimental!!)
Credit:
[email protected] For Source
DevilUsr said:
[UPDATE PUSHED]
CHANGELOG:
Change Default Governor to 'interactive'
Added MSM Hotplug
Added OC CPU Up To 1,8 GHZ Support
ReAdded DC CPU To 200 Mhz Support
ReAdded GPU OC Support Up to 650Mhz
Added Zen io
Added Kcal
OC Slimbus
OC Audio Processing
And Other Tweak
Download Link:
https://mega.nz/#!vz4n0CQD!hp2qV2WuDfy_pX8d-hB37ShLc48C52T4l5Lftnlf92k
Note:
If Flash fail use batik recovery or old twrp
ROM support :
M Based O-P
Treble O-P
Android Q (treble) (Experimental!!)
Credit:
[email protected] For Source
Click to expand...
Click to collapse
Fixed Download Link
Will you release the kernel source for the Android 10 version? The other thread is currently locked.
NEWER VERSIONS AVAILABLE
in later posts
physwizz_kernel a30R-V1
For OneUI or GSI
@physwizz
-Most securities disabled
-CPU Governors: conservative, ondemand, userspace, powersave, interactive, performance.
-Interactive is default governor
-SE linux enforcing
-CPU overclocked and underclocked
-Big: 312 - 2080
-Little: 208 - 1690
-Low battery drain
-works well with stock dtbo
Installation
1. Upgrade to Android R
2. Install kernel from TWRP
3. Install Magisk for root
4. Reboot
Bugs
No mtp for GSIs
GitHub
physwizz - Repositories
physwizz has 172 repositories available. Follow their code on GitHub.
github.com
Best kernel that works for android 11 so far thankyou !
Thanks.
Im using it with snake os rom.
Awesome.
The only thing missing is GPU overclocking, and your kernel will be 100/10
physwizz_kernel a30R-V2
For OneUI or GSI
@physwizz
-Most securities disabled
-CPU Governors: conservative, ondemand, userspace, powersave, interactive, performance.
-Interactive is default governor
-SE linux enforcing
-CPU overclocked and underclocked
-Big: 312 - 2288
-Little: 208 - 1690
-Low battery drain
-lz4 compression on zram
Installation
1. Upgrade to Android R
2. Install kernel from TWRP
3. Install Magisk for root
4. Reboot
Bugs
No mtp for GSIs
2288 doesn't stick
May have issues with stock dtbo
GitHub
physwizz - Repositories
physwizz has 172 repositories available. Follow their code on GitHub.
github.com
Mjsapnu23 said:
Best kernel that works for android 11 so far thankyou !
Click to expand...
Click to collapse
Good to know.
I don't have A30 so I can't test it.
Try v4
physwizz_kernel a30R-V4
For OneUI or GSI
@physwizz
-Most securities disabled
-CPU Governors: conservative, ondemand, userspace, powersave, interactive, performance.
-Interactive is default governor
-SE linux enforcing
-CPU overclocked and underclocked
-Big: 312 - 2184
-Little: 208 - 1690
-Low battery drain
-lz4 compression on zram
-mtp for GSIs(from topser99)
Installation
1. Upgrade to Android R
2. Install kernel fro TWRP
3. Install Magisk for root
4. Reboot
Bugs
May have issues with stock dtbo
GitHub
physwizz - Repositories
physwizz has 172 repositories available. Follow their code on GitHub.
github.com
arman0077 said:
Thanks.
Im using it with snake os rom.
Awesome.
Click to expand...
Click to collapse
Try v4
Akihikoryusuke said:
The only thing missing is GPU overclocking, and your kernel will be 100/10
Click to expand...
Click to collapse
Thanks.
One day maybe.
The last time I did GPU I made an A40 into a brick. Lol
Tried the v4, sadly im facing random reboots.
So i reflash the v1
A TWRP compatible with Android R?
joel_sinbad said:
A TWRP compatible with Android R?
Click to expand...
Click to collapse
Try this
Mjsapnu23 said:
Tried the v4, sadly im facing random reboots.
So i reflash the v1
Click to expand...
Click to collapse
This could be due to the overclocking.
It's odd that some a30 users can flash it and others can't
physwizz_kernel a30R-V4.5
Stable version
For OneUI or GSI
@physwizz
-Most securities disabled
-CPU Governors: conservative, ondemand, userspace, powersave, interactive, performance.
-Interactive is default governor
-SE linux enforcing
-CPU overclocked and underclocked
-Big: 312 - 2080
-Little: 208 - 1690
-Low battery drain
-lz4 compression on zram
-mtp for GSIs(from topser99)
-works with stock and custom dtbo
Installation
1. Upgrade to Android R
2. Install kernel from TWRP
3. Install Magisk for root
4. Reboot
GitHub
physwizz - Repositories
physwizz has 172 repositories available. Follow their code on GitHub.
github.com
Mjsapnu23 said:
Tried the v4, sadly im facing random reboots.
So i reflash the v1
Click to expand...
Click to collapse
I made v4.5 and it should work for you
physwizz said:
I made v4.5 and it should work for you
Click to expand...
Click to collapse
Ok im gonna test it
Mjsapnu23 said:
Ok im gonna test it
Click to expand...
Click to collapse
Works fine, without any issues thankyou !
I have tested it and I can say it works well. Is it possible however that you could optimize the kernal so that camera processing times could be quicker (is that possible?) Thanks in advance
Borkode said:
I have tested it and I can say it works well. Is it possible however that you could optimize the kernal so that camera processing times could be quicker (is that possible?) Thanks in advance
Click to expand...
Click to collapse
I don't think so.
Sorry
Borkode said:
I have tested it and I can say it works well. Is it possible however that you could optimize the kernal so that camera processing times could be quicker (is that possible?) Thanks in advance
Click to expand...
Click to collapse
you can off hdr function and camera takes pictures faster (I did not notice the difference in quality)