Good morning Friends, First of all, my greetings and respect to all
I have a note 5 Model N920T in Firmware 5.1.1 stock
I sold it Released by box, therefore the process that Find out for that was that it is put a Custom Kernel Autoroot, in this case the SkyHigh kernel and from there with a box the following release of Band ..
I am very interested in personalizing and modifying my note 5, I have always done the same from S1 of samsung and all notes, but due to FRP and DRK is always better to prevent than to regret, I am also aware that there will always be risks for safer than Look like the Procedure ..
Here is the doubt, if I wanted to Modify the Rom Stock had to YES or YES to make Root to the Device, something that I already gave it doing to Release the Band!
But I can not make a Hard Reset from the device in Settings because it sends me to the Recovery Original and in the Lower Part the Legend of" DM-Verity Failed"
I do not want to do Hard Reset from the Recovery doing Wipes, that's clear ..!
That is Normal in this case as I indicate ..?
*
1_ Should I ignore the message and give the next step that is to install TWRP ..?
2_ Should I Reinstall the Original Stock Software that is Installed on my Device using Odin and start again by doing the root myself from the Start ..?
I must clarify that the system works without problems in 5.1.1 but I need to upload Nougat and if it is with a custom Rom Much Better ..!
Please all help is very grateful ..!
Greetings from Ecuador..!
Related
This will be for the SM-G935D/SC-02H Japanese variant of the s7 edge.
Stock ODIN firmware: https://www.androidfilehost.com/?fid=457095661767130814 (Marshmallow)
TWRP 3.0.3-0: https://www.androidfilehost.com/?fid=817550096634747128
Rooted Rom: https://www.androidfilehost.com/?fid=385035244224413763
HKernel for hero2qltedcm:https://www.androidfilehost.com/?fid=745425885120706416
Kernel includes:
CVE updated
Permissive
F2FS support
Ramdisk changes the same as hero2qltechn variant. (All changes are the same)
Kernel Change-log:
https://github.com/travismills82/android_kernel_samsung_msm8996/commits/tw-6.0
TWRP Unofficial:
F2FS Support
More partitions supported for backup and restore compared to official version
How to root this device: https://forum.xda-developers.com/s7-edge/how-to/guide-sm-g9350-s7-edge-qualcomm-sd820-t3410969
Reserved
travis82 said:
This will be for the Japanese variant of the s7 edge this is an unlocked model also.
Stock ODIN firmware: https://www.androidfilehost.com/?fid=457095661767130814 (SC02HOMU1APL2)
TWRP: Coming soon
Debloated Rom: Coming soon
Kernel: Coming soon
Click to expand...
Click to collapse
Can this be used for sm g9350 hongkong?
Sent from my SM-G9350 using Tapatalk
Please use common sense and read ITS FOR THE JAPANESE VARIANT.. READ THE MODEL #. Good gosh stop posting stupid questions dude.
Thanks I'll try this when I get to work.
I can't seem to unlock my bootloader, I'm unable to flash TWRP and enter the recovery. It just says Recovery mode -> Warranty bit set: Recovery and enters into a normal boot after trying it a few times.
Edit:
used the official TWRP and recovery now works. Now trying to install the rom
Edit2:
When trying to install it keeps giving me the following error:
This package is for "SC-02h,hero2qledcm" devices; this is a "hero2qltedcm"
Update process ended with ERROR: 7
Error installing zip file '/sdcard/TWRP/SC-02H_Debloated.zip'
Edit3:
I edited the update-script and removed the assert.
However I don't notice any changes in the rom itself. It still has some bloatware (docomo stuff)
ahh ok i thought it would use sco2h not dcm I can fix that sorry, and I assume twrp is doing the same. I will use a dcm kernel in twrp, let me know if that kernel boots please I dont have the device in hand so I am relying on you all to let me know.
USE crom.apk to unlock bootloader you should find it in galaxy apps store. I'm pretty sure others have unlocked their bootloader doing the same thing. I also used to have someone install my hkroms and kernels on the jap variant so I know you can unlock the bootloader.
CROM: https://www.androidfilehost.com/?fid=385035244224394932
can you unlock the bootloader with that, its a link to what we used to unlock ours.
I need you to unlock your bootloader first please. Sounds like that is the issue.
If I run that app it just exits with Crom Service has stopped working.
Your rom works fine, it has root which is what I needed the most.
Just wish there was a way to remove the sim lock from the device without having to beg Docomo.
I bet I have my asserts all messed up here man I'm sorry. I see SC-02H than hero2qltedcm, than SM-G935D soo I need to get this in the correct order. Would you mind shooting me a pm so I can hangouts you so we can knocks this out quickly?
updated op with twrp recovery and kernel.
This works, root and most of the bloated software is gone
Off topic question (need some insight)
You have started to make a working TWRP for the Docomo variant - thank you for your work (hopefully people in JP using the Docomo version find success).
I know this is off topic but I thought you could provide me with a better understanding.
I am currently using the au KDDI variant (SCV33-Snapdragon) and have successfully installed TWRP (3.0.2-0) with ability to mount /data following xda, youtube, and a Vietnamese forum using google translate; BUT I am unable to keep TWRP ability to mount /data after flashing re-engineered boot file via odin to apply root (Snapdragon Variant Root). TWRP can still be used to go into recovery, mount /ext sdcard, and reboot. I've tried many different styles of rooting after and before installing TWRP, in addition to flashing in different ways - but I still failed. It's either have full working TWRP that can mount /data but without root; or, have root but TWRP that can't mount /data (basically useless as it cannot install anything nor, make backups).
I apologize for such long response, any insight or somewhere you can point me to where I can do more research, as this is how far I have come so far, but still fail to acquire both (Yes I have watched numerous YT vids and read countless post stating devs have not yet found a way on the US-Snapdragon variants, which I understand this may apply to the JP variant too) . Thank you.
With the development of ROMs for the Exynos variants (SG935F/FD) moving along apace... I'm wondering if it is feasible to use one of those ROMs with this kernel.
I did something similar to get a custom ROM made for an AT&T S4 onto my DoCoMo S4 (SC-04E) without issues.
Is that a stupid question?
SCV33 looks exactly the same as SC-02H. What's the difference? single sim dual sim? Can you use sc-02h roms for it? I need more information unless you guys want to start donating me devices.
bu06034 said:
With the development of ROMs for the Exynos variants (SG935F/FD) moving along apace... I'm wondering if it is feasible to use one of those ROMs with this kernel.
I did something similar to get a custom ROM made for an AT&T S4 onto my DoCoMo S4 (SC-04E) without issues.
Is that a stupid question?
Click to expand...
Click to collapse
You guys should never flash an engineering kernel anymore. There is no need since you have a custom kernel and ramdisk and twrp now since I made them. Also those are exynos not qualcomm you can port it but it will be a major task to do.
travis82 said:
You guys should never flash an engineering kernel anymore. There is no need since you have a custom kernel and ramdisk and twrp now since I made them. Also those are exynos not qualcomm you can port it but it will be a major task to do.
Click to expand...
Click to collapse
First, I really apprecate the work you have put in on bringing ROOT and TWRP to users in Japan. If I can help by doing some testing for you with my DoCoMo model, I'd be happy to do so!
Regarding my original question, I was not talking about an engineering kernel. I was thinking that if I flashed a custom ROM for the SG-935F Hong Kong (Exynos) model, and then flashed your kernel over it, would it work?
As I understand it, the kernel is the interface between the OS and the hardware. Maybe that is ignorant? The reason I ask is because this process was quite common for Japanese S4 users to employ custom ROMs for US S4s; i.e. Flash the US custom ROM (e.g. Mokee or Albee95) and then flash the Japanese S4 kernel onto it.
I understand the question might seem silly to you, but I don't have the hundreds of hours required to reach your level of expertise. I have invested sufficient time to understand much of the jargon; and the tools and methods employed to get root and flash ROMs. More than that, I rely on asking the experts, like you. :good:
you would have to port firmware framework and a bit of other things, secondly hong kong does not self exynos versions here. It's all Qualcomm.
SCV33 waiting for someone to flash this kernel on it to let me know if its compatible or not.
Anyways updated main thread with BETA 2.
Enjoy,
Travis82
SCV33 test 1
travis82 said:
SCV33 waiting for someone to flash this kernel on it to let me know if its compatible or not.
Anyways updated main thread with BETA 2.
Enjoy,
Travis82
Click to expand...
Click to collapse
Travis,
TESTED (Semi-working)
I've done some testing on my SCV33 variant using what you've made for the SC-02H.
[Kernel]
I flashed the HKernal Beta 2, using the SC-02H FW, and TWRP Unofficial you've provided onto my SCV33 Galaxy S7e and it is really snappy and fast. Very nice kernel. Any DoCoMo users out there should flash this - though still beta it does the job. I had no problems flashing this in TWRP.
[TWRP Unofficial]
I was able to mount all partitions - works. I had no problem flashing this using Odin.
[Problems I've Encountered]
* After rebooting into TWRP Unofficial many times. My log reads "Unable to mount /steady." I have no idea what this is or what partition it belongs too; but, TWRP is still able to do everything else such as mount /data, wipe /system, etc. - I don't think its a big issue to be honest. Just wanted to let you know.
* After installing everything and everything working fine. I do not/cannot communicate with networks (cannot connect to wifi, cannot call, and no data). I had check SIM status = not available, IMEI = Unknown, SN = Unknown. I had made an EFS back up of my KDDI rom with working network communication and restored with with TWRP Unofficial. Installation via TWRP log has stated successful, but upon reboot problem has not been fixed. Any ideas I should try? I also believe the software from the SC-02H OS handles how im about to connect to data towers and catch frequencies. Putting in my own APN does not work.
* Crom Service.apk you've provided at an earlier comment to unlock bootloader, which I've installed, does not work. All it does is FC when trying to open the app - installation is fine. I had also tried getting one from the internet, and looking for it at the Samsung Galaxy App Store - the internet one does the same, FC. Samsung Galaxy App Store does not have Crom Service available. I am assuming SCV33 wont ever be able to unlock bootloader.
* Debloated Rom Zip does not work, after doing a clean install to Stock Odin, installing TWRP Unofficial, system ext4 format, wiping /system /data /internal storage /dalvikArt /cache, and flashing Debloated Rom Zip with TWRP - states installed successful and boots up. Though upon booting I still have all the bloat there. In addition, many FCs from many different apps, even after reboot (e.g. tap and play, google play store, google services). The rom still functions after a couple more reboots after a /dalvikART cache wipe, but it just doesn't seem as fast as the stock one though. I believe this maybe a conflict due to my device, and myself as well.
----
Oh BTW the SCV33 is:
*SM-G935J
*OS 6.0.1
*Single SIM only
I will try my best do to other methods on trying to get this to fully work, but the Network Communication thing always halts my progress. I really dig this kernel man.
Again, thank you for your hard work and dedication to the Snapdragon Variant its very much appreciated :highfive:. Looking at the Exynos sub-forum I get so jelly at times.
OK is yours has a different modem then the rest. Also your partitions might be a bit different, I really need that device in my hands to look at the partition layout. If you can find SCV33 kernel source I will be more than happy to make a kernel for this variant also. I call my kernels beta because it's just how I do it.
Ok found your source for the kernel I'll check out the configs and maybe make a kernel later on this week.
SM-G935J (SCV33)
Here is a test kernel: https://www.androidfilehost.com/?fid=529152257862698452
Rooted rom: https://www.androidfilehost.com/?fid=529152257862698453
Let me know if there is any issues.
how to make s8+ update device after install magisk
Are you talking about OTA? You'll need to first restore a stock boot image (and then reflash Magisk afterwards). Or, since you're flashing stuff anyway, you can just flash a full firmware (and then reflash Magisk afterwards).
I don't think your tripped KNOX will have any impact on updating, but someone who knows something about Samsung will have to confirm that one.
i just reset my phone to factory setting and i just install it as first app to try if it works for snap chat and ota updates ..
the snap chat works fine after active the hide function but the ots update it says that the operation system on your device has been modified .... so what should i do ?
You'll need to at least restore the stock boot image, like I said...
can you help me to where i find it and how to makr it plz as youtube link or page of xda . thanks alot
Come on dude... I've given you the info on what you need. Now it's up to you to make it work. Go to you device forums: https://forum.xda-developers.com/galaxy-s8+. I'm sure you can find the info there.
I'd just not bother with the OTA if I were you and just flash the full firmware. You'll find how to do that in your device forums as well.
thanks alot
Hi!, I'm new to the forum and tried to figure out where to ask for help.
Here's my problem: I own a Samsung Galaxy J5 2016 (SM-J510MN), SO Android 6.0.1 and its ISP is Antel (Uruguay), I've rooted it a few months ago with Magisk (I think I started with 15.0), been working without problems on my device, but a few days ago it couldn't update to 16.0 (by the way I also couldn't update the Greenify module) from 15.3 but updating from the recommended method didn't work, so I tried to uninstall the 15.3 I had from the manager and then install 16.0 (flashing with TWRP), installation was sucessful but since then every time I attempt to enter the device's system it always go to TWRP, and the "Set warranty bit: kernel" that appears at the top now changed to "Set warranty bit: recovery". I've been finding through the forums and outside of them too but most tutorials require to use ODIN, which I don't mind using, but as I said my ISP is Antel, which is from Uruguay, but there's no firmware for it (only Claro in the case of my country) and to top it I'm not sure if I can use some sort of universal ROM or custom ROM.
I also used different versions of Samsung KIES, it stays at "connecting", so I tried to use an option in the tools menu which isn't in all versions that's like to start an upgrade of firmware (cannot remember it well) but when I input model "SM-J510MN" the program thinks I mispelled it but I made sure closely I wrote it well.
So... I'd like to know if I have to flash a certain ROM or send it to repairs, I've no problem with any method that deletes my data (already have a backup) or pay for repairing it, I just would like to make sure if this is fixeble somehow.
Ah... I had USB Debugging disabled, perhaps I can't flash a ROM after all.
I think I provided the needed data but if you need to know something else let me know please! thanks in advance!.
sheinbo said:
Try to flash a different twrp Version, it is the easiest way to usw Odin. In my dass the newest twrp for my tab did the same bootloop in recoverymode, after flashing an oder twrp Version everything worked.
Click to expand...
Click to collapse
Good!, I'll give another try to Magisk and do that once I get a new phone so it's safe to try (I'll answer with results by then). Because I already sent it for repairing some time ago and decided not to root it again, just in case.
Anyways thank you!.
Mods.: please don't close this post because more posible solutions may come and I'd like to try them.
Hi,
about 2 years ago I rooted my S2 Galaxy Tab (T719) and now I would like to upgrade from Android 6.0.1 to Android version to 7 or 8. I have googled for instructions on how to upgrade a rooted S2 Tab but did not find anything useful (most info is on OTA upgrades which no longer works on rooted devices). Could someone please post step-by-step instructions (please bear in mind that I only ever deal with this kind of thing once every 2-3 years so I do not have much experience). I have TWRP v 3.0.2 installed (do I need to update this as well?) and the tablet is not encrypted (so hopefully I won't have to wipe the system partition and re-install all the app?!?). Thanks.
I also noticed that there is now a huge variety of ROMs out there. How can one know which ones are trustworthy? The main reason I rooted the tablet was to be able to increase privacy (control app permissions with XPrivacy). So I do not want to install some custom ROM that maybe contains spyware or other compromising features. Any advice on this would be greatly appreciated. Given my motivation (privacy) for rooting, would it maybe be better to go back to Stock ROMs (i.e. non rooted) and simply control web access via netguard (by preventing net access for some apps, they may still spy on my contacts, location, or email but cannot phone home to transmit the information)? At least I would still get OTA updates because being excluded from the OTA channel also poses a security risk in itself I suppose. Ok so any advice would be appreciated.
Thank you in advance!
There is no official Android 8 for our device. If you want 8 or 9 you have to install a custom ROM like LuK1337's LineageOS port. It is as safe as LineageOS is by itself on any device. Only problem you might have then is that calling is not possible anymore for now, but LTE works. If you want to use LOS, you HAVE to format data because it's not compatible at all. If you wanna stay on official Android you might keep it. Installing is done by flashing the official firmware with the correct country code over Odin. This will remove TWRP at first so you have to reflash it by Odin afterwards. For firmware download I always use: https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647 and Odin is found by google. If you wanna got the way to LOS you have to do all the steps I mentioned before too anyways to have a recent Modem firmware and bootloader. In that case you just have to flash LOS and OpenGAPPS by TWRP and delete /data aka Factory reset.
Regardless what you do, after ODIN is done, you HAVE TO boot into TWRP immediately to keep it from being removed by official firmware. While you are in there anyways you can install magisk to keep it from encrypting /data
Many thanks emuandco. So I guess I will stick with the Android 7 as I do not want to reformat the tablet and reinstall all the apps. I have started to download the Android 7 stock ROM, but it is taking quite long so in the meantime just to confirm, the steps to follow are:
1- use odin to flash the stock ROM (no steps required prior to this? I simply overwrite the existing ROM? I suppose that I will loose root then and need to re-root the device using the standard procedure as explained here: http://www.samsungsfour.com/tutoria...nougat-7-0-using-cf-auto-root-all-models.html ?)
2- use odin to flash TWRP (I will need the newest version I guess and cannot use the same as for Android 6?)
3- boot into recovery mode to ensure that TWRP does not get overwritten
4- done
Is this correct? Do I then need to reinstall Xposed, SuperSU and Xprivacy or will they be preserved?
Thanks again!
P.S.: BTW, I also found these instructions: https://forum.xda-developers.com/tab-s2/development/twrp-3-0-2-1-galaxy-tab-s22016-sm-t713-t3390627 which are slightly different from http://www.samsungsfour.com/tutoria...nougat-7-0-using-cf-auto-root-all-models.html and require a wipe of the data partition. Does this mean that for an update to Android 7 I definitely do need to wipe the data partition? If this is the case then this would be a major disadvantage of rooting in the first place and maybe I simply flash the stock ROM and do not root at all but go the "netguard" route as mentioned in my original message?
I never used the official Firmware that much. Fist thing I did was going on LuK1337's nerves to get a port of LOS for it up and running So no clue if Samsung manages to keep /data but I guess so. Yeah, looks fine what you list there. You COMPLETELY overwrite ANY modification in kernel or /system, so reflash your mods and root (Magisk). I always recommend to uase the MOST recent TWRP. (https://dl.twrp.me/gts28velte/ should be it in your case).
Ah and looking at your manuals... Check OEM unlock just to be rather safe than sorry if things go mad.
emuandco said:
I never used the official Firmware that much. Fist thing I did was going on LuK1337's nerves to get a port of LOS for it up and running So no clue if Samsung manages to keep /data but I guess so. Yeah, looks fine what you list there. You COMPLETELY overwrite ANY modification in kernel or /system, so reflash your mods and root (Magisk). I always recommend to uase the MOST recent TWRP. (https://dl.twrp.me/gts28velte/ should be it in your case).
Ah and looking at your manuals... Check OEM unlock just to be rather safe than sorry if things go mad.
Click to expand...
Click to collapse
Deleted
Hello folks !
I just bought a galaxy S10 5G G977N and I found it difficult to work my way through all the changes made in rooting/custom roming smartphones (I had a galaxy S7 before that, it was pretty easy).
What I read for now :
How to root with magisk : https://topjohnwu.github.io/Magisk/install.html#samsung-system-as-root
How to install TWRP : https://twrp.me/samsung/samsunggalaxys105G.html
What I learned :
Rooting device is far more complicated than it was before. If I do so, I won't be able to update stock rom OTA, I'll have to reflash a patched recovery (AP file) for every update. This bothers me because its not convenient, and because messing with odin is way riskier than flashing zip from custom recovery and may brick my phone, so the less I use it, the better I think.
Plus,booting the phone will be a pain in the ass, having to do the right key combination
Installing TWRP will not change that.
What I'm wondering :
I'm a bit confused on how I will be able to update stock ROM (The way I understand it, I'll have to reinstall TWRP after each update)
And I'm even more confused about how all of this will work with custom ROMs.
Let's say I root my phone and install TWRP. If I want a custom ROM and keep it rooted, how will it work ? I'll have to unzip the ROM, patch the AP file with magisk, rezip it, flash it with twrp and voilà ? And I'll have the same key combination issue where I'll have to boot a certain way to access the rooted ROM, and if I don't, I'll boot on an unrooted ROM ?
Thank you a lot for helping. I'm really used to rooted and unbloated ROM (God I've forgotten how bloated stock ROMs are !) but the complexity of the operation stops me for now. I don't want to brick my phone and I'm not sure I'll have the courage to do all of this every 3 month for each update.
Hello!
This thread is a bit old. But since I had to dig the forum to find what I was looking for (and update my knowledge), maybe my answer will be useful for somebody else.
Rooting device is far more complicated than it was before.
Click to expand...
Click to collapse
Yep. That was a shocker for me, coming from a 7 year old phone.
Plus,booting the phone will be a pain in the ass, having to do the right key combination
Click to expand...
Click to collapse
I agree! Thankfully, somebody smarter than me took care of that. You can thank ianmacd for his multidisabler (GitHub project's page; xda thread).
One of its functionality is to disable "Stock recovery auto-restoration".
If you want to see a guide for how to use it (for S10 5G Snapdragon only, but same principle apply for the others), afaneh92 wrote one! Same thing by corsicanu, but with official links to download TWRP (and his repository for the other stuff), and it works with other versions of the S10 too. corsicanu got his tools here if needed.
Be careful, you must format /data after disabling encryption with multidisabler. Back up your data first!
I won't be able to update stock rom OTA
Click to expand...
Click to collapse
No OTA if you root.
You can still upgrade the stock kernel/firmware to a newer Android version manually. Afterwards, flash TWRP, then flash multidisabler again, then run multidisabler in terminal. And, all good!
(Reflashing stock firmware disables "multidisabler")
Check for firmware updates on Samsung's changelog page.
Replace your S10 model number and CSC code in the link below:
doc.samsungmobile.com/YourModelNumber/YourCscCode/doc.html
To know which CSC you have:
Go to Settings > About phone > Software information > Service provider software version
The last line should show the current CSC (three characters), e.g. mine is KTC for Korean KTC devices.
doc.samsungmobile.com/sm-g977b/ftm/doc.html
corsicanu makes it easier for us, here is his github page for the S10.
I'm a bit confused on how I will be able to update stock ROM (The way I understand it, I'll have to reinstall TWRP after each update)
Click to expand...
Click to collapse
To flash the ROM the first time:
Flash the ROM with TWRP (adb sideload), Format data/factory reset. Formating everything will reenable encryption if you had multidisabler installed first. I think. So I guess flash it afterwards, and format data again?
For example, you can follow Lineage OS's guide. But they don't take care of vbmeta, encryption, and other issues. I'm not sure why.
To update the ROM, it's easier: no need to reinstall multidisabler after a dirty flash. (Lineage guide to update their ROM)
I'm dropping some links you might need:
To download the last version of Odin (odin3-v3-14-1_3b_patched-zip as of date): realbbb's XDA thread.
All the versions of TWRP for the beyondx (G977B and N, maybe other letters too )
Ok. That's all for now. Good luck!