1.Download The Full Frimware B125 Or Higher With Frimware Finder
2.After The Download You Will Find In The Folder HWFF
(intSd or extSd) These Three Files:-
(The Name Could Be Different Due To The Version Of The Device)
update.zip
update_full_PRA-L31_hw_normal.zip
update_full_PRA-L31_hw_eu.zip
update_data_full_public.zip
3.If In intSd Move HWFF To extSd
4.Extract Update.ZIP
5.Now You Delete The ZIP And Replace It With The Update.APP
6.The Order Should Be Like This:-
(Create Dload Folder And Put The Files In There)
UPDATE.APP
update_full_PRA-L31_hw_normal.zip
update_full_PRA-L31_hw_eu.zip
update_data_full_public.zip
7.Then Start The Update By Entering This Code In The Dialer
*#*#2846579#*#*
8.Choose Software Upgrade
9.Choose SD Card Update
10.Good Luck
If The Update Doesn't Succed You Must Wait For OTA Update
And Make Sure To Choose The Correct Version For The Device Or To The Next Higher Version
Credits To:-
@ChinHon
Only succeeds to the next higher version.
B125 is for single or dual sim?
does it also work on branded phones?
xpatze85x said:
does it also work on branded phones?
Click to expand...
Click to collapse
he didn't answer even to my question..imagine yours..
ChinHon said:
Only succeeds to the next higher version.
Click to expand...
Click to collapse
I Edited The Post
haky 86 said:
B125 is for single or dual sim?
Click to expand...
Click to collapse
Dual SIM
YSFYoussef480 said:
I Edited The Post
Click to expand...
Click to collapse
In my Thread I had reported how one updates of the B100 on the B110. This means a version higher. (The B103 are sales version) An update on a higher version has not succeeded.
ChinHon said:
In my Thread I had reported how one updates of the B100 on the B110. This means a version higher. (The B103 are sales version) An update on a higher version has not succeeded.
Click to expand...
Click to collapse
could be nice if someone upload both single and dual sim "sales version" like we did on p8 lite ale-l21, since no methods to downgrade/reinstall fimrware, thanks
Didn't work for me, only if i change folder name from HWFF to dload then it boots on recovery but gives me update fail at 5%
Thanks
Would this work with a rooted phone and TWRP recovery installed?
it didn't worked
Which one should I download? All of them are higher than my existing one.
Also, could I update with Root and TWRP?
TIA
Related
Hi guys i've an ascend p7-l10 with firmware P7-L10V100R001C00B121SP01 and i'd like to update to the latest emotion ui 3.0 firmware. In OTA i don't receive any update. So i tried to do a local update but it says me failed at the end of the process. Any tip? Thx u all
lucamess said:
Hi guys i've an ascend p7-l10 with firmware P7-L10V100R001C00B121SP01 and i'd like to update to the latest emotion ui 3.0 firmware. In OTA i don't receive any update. So i tried to do a local update but it says me failed at the end of the process. Any tip? Thx u all
Click to expand...
Click to collapse
Install the CUST file, there is on the Firmware Vendor folder.
lucamess said:
Hi guys i've an ascend p7-l10 with firmware P7-L10V100R001C00B121SP01 and i'd like to update to the latest emotion ui 3.0 firmware. In OTA i don't receive any update. So i tried to do a local update but it says me failed at the end of the process. Any tip? Thx u all
Click to expand...
Click to collapse
I was in the same situation. I've solved the problem by flashing the next firmware, not directly the last ones with emui 3.0. After that the I've received all the other ota uodates
iobling said:
I was in the same situation. I've solved the problem by flashing the next firmware, not directly the last ones with emui 3.0. After that the I've received all the other ota uodates
Click to expand...
Click to collapse
Hi, i've a question: I need to insert in the "dload" folder the zipped firmware or i need to unzip first and put in the dload folder the UPDATE.APP file? Thx for the answer
lucamess said:
Hi, i've a question: I need to insert in the "dload" folder the zipped firmware or i need to unzip first and put in the dload folder the UPDATE.APP file? Thx for the answer
Click to expand...
Click to collapse
I think i had unpacked the archive and then moved to the internal memory the dload folder that was inside the archive
lucamess said:
Hi, i've a question: I need to insert in the "dload" folder the zipped firmware or i need to unzip first and put in the dload folder the UPDATE.APP file? Thx for the answer
Click to expand...
Click to collapse
You need to put the UPDATE.APP file into the dload folder. The dload folder should be at the root of your SD card
Hi guys,
For those who have Huawei P8 Lite ALE-L02 DUAL SIM, here is the official Android 6.0 update.
Versions that can be upgraded are ALE-L02C636B150 and ALE-L02C636B522.
http://consumer.huawei.com/tw/mobile-phones/support/downloads/p8-lite-tw.htm
Instructions for sdcard are included into the package.
Otherwise you can also follow this instructions posted here on XDA.
Enjoy your Android 6.0!
Hi, mine is ale-l02c635b140. Can i update it to 6.0?
Dual sim?
legendarryl said:
Hi, mine is ale-l02c635b140. Can i update it to 6.0?
Click to expand...
Click to collapse
I think you can't because your build is different. If you try, you can break your phone.
Only phones with C636B150 and C636B522 builds can update.
Sheshanxt said:
Dual sim?
Click to expand...
Click to collapse
Yes.
Sheshanxt said:
Dual sim?
Click to expand...
Click to collapse
I was also confused but if you look on pdadb.net, there are 7 devices linked to Huawei P8 Lite:
ALE-L04 Dual SIM LTE
ALE-L02 Dual SIM LTE
ALE-L21 Dual SIM LTE
ALE-L23 Dual SIM LTE
ALE-CL00 Dual SIM TD-LTE
ALE-TL00 Dual SIM TD-LTE
ALE-UL00 Dual SIM TD-LTE
I would give a link, but I am not allowed yet
legendarryl said:
Hi, mine is ale-l02c635b140. Can i update it to 6.0?
Click to expand...
Click to collapse
Ale-l02 doesn't support nfc so i can't update using versions for ale-l21.
For ALE-L02 there aren't any 6.0 versions yet.
VladHD said:
Ale-l02 doesn't support nfc so i can't update using versions for ale-l21.
For ALE-L02 there aren't any 6.0 versions yet.
Click to expand...
Click to collapse
http://consumer.huawei.com/tw/support/downloads/detail/index.htm?id=80850 Compatibility: One of the following builds is required to be running on your device in order to be able to support this update.
ALE-L02C636B150
ALE-L02C636B522
Hello,
Maybe another link, the first one is very low
Thanks for all
jemsgaelle said:
Hello,
Maybe another link, the first one is very low
Thanks for all
Click to expand...
Click to collapse
http://www.carbontesla.com/2016/05/...l02-b530-marshmallow-firmware-asia/#more-6156
Downgrade
Can I down grade back to ALE-L02C636B150 from ALE-L02C636B530
Thanks
i tried to update to android 6, In the update menu ..local update ->full package:Update.app(local storage)..then after i install it...the phone restarts in twrp and in twrp there was an error message
...i.e. e:failed to sysMapFile '/data/media/0' ....wat went wrong...m stuck here,,,i dont know what to do...
Darkwell_Habridge said:
i tried to update to android 6, In the update menu ..local update ->full package:Update.app(local storage)..then after i install it...the phone restarts in twrp and in twrp there was an error message
...i.e. e:failed to sysMapFile '/data/media/0' ....wat went wrong...m stuck here,,,i dont know what to do...
Click to expand...
Click to collapse
you cant do an local update while you have twrp installed. if it's bricked -> unbrick it.
Lordbannakaffalatta said:
you cant do an local update while you have twrp installed. if it's bricked -> unbrick it.
Click to expand...
Click to collapse
the phone is unlocked....ya i tried the local update...then the phone restarts automatically and twrp is opened...n then no where to go...
what bout brick.,..how to know that whether the phone is bricked or not..
Darkwell_Habridge said:
the phone is unlocked....ya i tried the local update...then the phone restarts automatically and twrp is opened...n then no where to go...
what bout brick.,..how to know that whether the phone is bricked or not..
Click to expand...
Click to collapse
a brick is what we call when a device won't boot into android anymore.
if you still can boot into recovery it's nothing to worry about you have a softbrick.
you installed twrp. that's your problem.
download the offical build you're on now and extract it.
download Huawei extractor and install it
select the update.app (the large one) from your downloaded build in huawei extractor.
rgiht click on recovery.img and select extract this
after that install miimal adb and fastboot.
boot your phone into bootloader (connect with pc then power it on while holding volume down button pressed until you see a white screen with the android puppet on)
put the recovery.img that you extracted in the adb and fastboot folder
open up a cmd window and type
Code:
fastboot devices
you should get something like
Code:
list connected devices
blablabla
is thats the case put int this
Code:
fastboot flash recovery recovery.img
wait ill its done and try to do a local update again by putting your update in a dload folder on your device and booting into recovery and do a force update.
it should work.
for the files... just google them.
Lordbannakaffalatta said:
a brick is what we call when a device won't boot into android anymore.
if you still can boot into recovery it's nothing to worry about you have a softbrick.
you installed twrp. that's your problem.
download the offical build you're on now and extract it.
download Huawei extractor and install it
select the update.app (the large one) from your downloaded build in huawei extractor.
rgiht click on recovery.img and select extract this
after that install miimal adb and fastboot.
boot your phone into bootloader (connect with pc then power it on while holding volume down button pressed until you see a white screen with the android puppet on)
put the recovery.img that you extracted in the adb and fastboot folder
open up a cmd window and type
Code:
fastboot devices
you should get something like
Code:
list connected devices
blablabla
yup there we go with android 6....after installing the stock recovery.img, everything went on smoothly....THANK U Lordbannakaffalatta... really appreciated ur help..:good:
Click to expand...
Click to collapse
Is Marshmallow Available already on ALE-L02C635B140?
The OTA-Update finds nothing and all the instructions say, that it should be possible for ALE-L02 but not for B140. Why not?
Thank you
EDIT:
I think i found the answer: I have to wait for the OTA Update from B140 (New Zealand)
:/
Any idea how do I get rid of the balong bug for the ALE-L02?
Anyone knows if spanish language is included in these update?
do you have firmware for lumiere 503HW its the japanese P8 lite my build no. is ALE-L02C111B200 please help i want to go back to stock.
Hello! I have ALE-L02C636B150 on my phone, but i'm from Serbia. Will i have any problems if i install the update and i'm not from Asia? This ROM has English and other European languages?
Hello friends,
I have Huawei P9 Dual EV-L19 Model from Middle East (Oman)
Accidentally i am stuck on Firmware Version C900B116 , now i want to install C185B180. I found number of thread but not able to find proper steps
please anyone help
Current Build Number - EVA-L19C900B116
Bootloader Version - EVA-C900B116_Fastboot
Vendor - hw
Country - normal
Even firmware finder not able to find which version should install until next of this
Cell still in Warranty, not rooted, boot loader locked
Attached Screenshot for Reference
Help me please on this matter
sunnymodh said:
Help me please on this matter
Click to expand...
Click to collapse
Unlock bootloader, flash twrp and install update.zip and full_update.zip for your device
Or you could try to find the files to update the devices via dload to a other firmware, but I'm not sure that works, because you want to change the cust.
_Frostplexx_ said:
Unlock bootloader, flash twrp and install update.zip and full_update.zip for your device
Or you could try to find the files to update the devices via dload to a other firmware, but I'm not sure that works, because you want to change the cust.
Click to expand...
Click to collapse
Which Version should Flash of C185, because C185 have number of Versions available
sunnymodh said:
Which Version should Flash of C185, because C185 have number of Versions available
Click to expand...
Click to collapse
The newest one ?
_Frostplexx_ said:
The newest one ?
Click to expand...
Click to collapse
Right now C185 have latest Nought with Emui 5
is it not Require any previous version to installed over new one ? direct Nought will work ?
sunnymodh said:
Right now C185 have latest Nought with Emui 5
is it not Require any previous version to installed over new one ? direct Nought will work ?
Click to expand...
Click to collapse
I don't know, but you can try to install the newest version before nougat and than flash the first nougat version for your device.
_Frostplexx_ said:
U don't know, but you can try to install the newest version before nougat and than flash the first nougat version for your device.
Click to expand...
Click to collapse
Finally Got the Nought Latest Update with the help of Local Huawei Service Center, because my Cell still under warranty and they Changed Motherboard
Service firmware Emui 9.1 PE C432 huawei p smart(2018) + root Magisk
This is the fig lx Emui 8 firmware on fig lx EMUI9.1 location c432 9pe.android.
Downloading the firmware, unpack the necessary files into the DLOAD folder. And put the folder with the firmware on the DLOAD sd card. Turn off the phone: hold down + - and turn it on after vibration, watch the firmware process. After the firmware, a hard reset will occur, and the boot loader is locked (before the firmware, make sure that stock recovery is in place)
Download firmware :
download
Installing root. Unlock bootloader, install
TWRP
..
We will need:
Magisk manager installed on the phone. RECOVERY_RAMDIS.img pulled from UPDATE.APP firmware How to patch stock recovery: We go in tel. in Magisk manager click Install Select patch file We are looking for our RECOVERY_RAMDIS waiting for the end (the path is specified after completion) magisk_patcher.img. The path of the phone memory folder Download If twrp with encryption, our patched file is transferred to our magisk_patcher.img.
1.We go to TWRP, if twrp is not in the Erecovery section, then we flash it into erecovery through img. (Wish) images.
2. We are patching our patched stock recovery to the recovery section.
3.We do through Twrp a reboot in recovery to start the root (it will not go into rekoveri already) With EVERY boot, if we want to root, we boot into the recovery (volume + when turned on), when rebooting, Magisk Manager does this automatically. Route received. What works: Full root, Magisk Hide and everything connected with it including Google Pay, as well as eRecovery What does not work: It is impossible to install a stock recovery, which means that to update the system you need to flash the native recovery, update it, and then do the procedure again.
Ready patched Stock recovery flash in RECOVERY section for C432 9.1.0.115
Download patched: download
Download Magisk : download
Already come updates on the C432, wait, or check through applications Hicare Norway choose a country.
Sorry for the English, Greetings from Belarus, from the forum 4p da. #mak6021
Is this for 2018 or 2019 model?
harry_turtle said:
Is this for 2018 or 2019 model?
Click to expand...
Click to collapse
2018
So, can I use this firmware to upgrade from emui8 to emui9?
tissa_ said:
So, can I use this firmware to upgrade from emui8 to emui9?
Click to expand...
Click to collapse
Yes
will this work on C782?
punteruk said:
will this work on C782?
Click to expand...
Click to collapse
Try, but I do not guarantee, firmware for c432
Hello is this beta or full release ?
0ckysaurus said:
Hello is this beta or full release ?
Click to expand...
Click to collapse
Official firmware, not beta.
What is the language of the rom?
lecortes said:
What is the language of the rom?
Click to expand...
Click to collapse
Multi-language firmware all languages.
mak6021 said:
Official firmware, not beta.
Click to expand...
Click to collapse
where you find this firmware?
javadoverall said:
where you find this firmware?
Click to expand...
Click to collapse
androidhost
This is the official firmware. Do not doubt
:angel:
mak6021 said:
androidhost
This is the official firmware. Do not doubt
:angel:
Click to expand...
Click to collapse
same body tested for another model.. like fig la1..?
Are you think answer for another model
javadoverall said:
same body tested for another model.. like fig la1..?
Are you think answer for another model
Click to expand...
Click to collapse
Huawei P Smart FIG-LX1 FIG-L11 FIG-L31 HWRCF Figo-L11 Figo-L31 I think I should get up, location c432?
mak6021 said:
Huawei P Smart FIG-LX1 FIG-L11 FIG-L31 HWRCF Figo-L11 Figo-L31 I think I should get up, location c432?
Click to expand...
Click to collapse
why?
Hi.
If I do not want to root my cell phone. What should I do for this?
freeuser00 said:
Hi.
If I do not want to root my cell phone. What should I do for this?
Click to expand...
Click to collapse
Download only the firmware but it will lock your bootloader
How does rooting keep the bl unlocked?
I have a FIG-LX1 that I rebranded to C432 and I patched NVME to unlock Bootloader
Can I and how do I re unlock the bootloader on Emui 9
And how to I downgrade to Emui 8
Thanks in advance
Can someone create a mirror? Download max reached...
This tool will help you upgrade from EMUI 9.0 to EMUI 9.1 .
Requirements:
- Unlocked Bootloader
- A rooted device (if you don't have root use the TWRP EMUI_9.1_Flasher tool.Bootloader unlock is required))
- ADB Debug enabled
- A PC with Windows OS
- EMUI 9.1 FullOTA firmware
- Ability to follow some simple on-screen instructions
Credits:
@ante0 - for the new Pie based no-check recovery --> you should thank him here
all the others that contributed to this tool
Instructions:
- Download and extract the tool
- Connect your device to the PC and make sure ADB Debugging it's enabled
- Launch the Flash.bat
- Follow the on-screen instructions
Download
EMUI9.0_to_9.1_update_tool.zip
EMUI9.0_to_9.1_update_tool_root.zip -- This version will also install Magisk 19.3 Stable - Magisk Manager it's optional and can be skipped
EMUI_9.0_to_9.1_update_tool_root_3_files.zip -- This version will allow you to flash the base firmware,cust and preload.Obviously,you can skip the Magisk part if you want
TWRP EMUI_9.1_Flasher -- This tool won't require a rooted device
EMUI_9_0_TWRP_Flash_Unbrick_Tool.zip -- Use this tool to flash an EMUI 9.0 firmware if your device is soft bricked and is no longer booting to EMUI OS
Firmwares Collection :
BLA-L29 C432 - 9.1.0.300 - > https://forum.xda-developers.com/mate-10/how-to/firmware-version-mate-10-t3722019/post79923909
BLA-L09 C432 - 9.1.0.300 -> https://forum.xda-developers.com/showpost.php?p=79932379&postcount=14 <- base firmware it's the same as BLA-L29
Hello (i have a mate 10 pro on 9.0 with root),
for fullOTA rom, i use FF to find one, BLA-LGRP2-OVS 9.1.0.303, but links for 3 differentes sizes (3.46, 3.4, 3.49GB) of ROM??
my phone will be rooted again? If not ? can you please tell me how to be root again?
is there some issue with 9.1 ROM?
how can i roll back if need?
Thanks for your job.
syd-3 said:
Hello (i have a mate 10 pro on 9.0 with root),
for fullOTA rom, i use FF to find one, BLA-LGRP2-OVS 9.1.0.303, but links for 3 differentes sizes (3.46, 3.4, 3.49GB) of ROM??
my phone will be rooted again? If not ? can you please tell me how to be root again?
is there some issue with 9.1 ROM?
how can i roll back if need?
Thanks for your job.
Click to expand...
Click to collapse
Hi! I don't know which version it's fine for your device and the only way to know it it's to flash it yourself, but i don't recommend you to do that.
Rooting with Magisk is fine on 9.1, just read the latest posts from this thread - > https://forum.xda-developers.com/mate-10/how-to/guide-magisk-root-mate-10-pro-t3886967/page27
As for the roll-back, ut should be possible to do it with this tool and an appropriate roll-back firmware (again, firmware version might depend on your cust/brand).
I recommend you to keep an eye and also read this thread - > https://forum.xda-developers.com/mate-10/how-to/firmware-version-mate-10-t3722019
Tried this but for some reason it fails when checking firmware on my bla-a09 tried all 4 firmwares on FF
tokoam said:
Tried this but for some reason it fails when checking firmware on my bla-a09 tried all 4 firmwares on FF
Click to expand...
Click to collapse
B303 is not for A09, it's for C800 which is some jp cust.
Most new fw links are not up yet, and since Huawei decided to name all their firmware the same regardless of model its hard to know which is which :/
Success! Updated BLA-L29C432. Thank you!
Krasimir said:
Success! Updated BLA-L29C432. Thank you!
Click to expand...
Click to collapse
Great! Soon i will upload a new version that will also flash the patched Magisk ramdisk_recovery and Magisk Manager (this one will be optional, so those who already have it, can skip it).
It worked for me also.
Why is root needed? Unlocked bootloader is not enough?
criszz said:
Why is root needed? Unlocked bootloader is not enough?
Click to expand...
Click to collapse
Nope! Well, it can be done without root too, but it would require twrp in that case.
Firmware for Bla-l09c432 ?
MagicBox96 said:
Firmware for Bla-l09c432 ?
Click to expand...
Click to collapse
Somewhere on Huawei's servers! xD
I found a firmware on Easy Firmware, bla-l09 c432 b300 but I don't know if it can be obtained for free or secure, you have nothing?
MagicBox96 said:
I found a firmware on Easy Firmware, bla-l09 c432 b300 but I don't know if it can be obtained for free or secure, you have nothing?
Click to expand...
Click to collapse
as stated before, since every update is named the same it's hard to tell which is L09, L29, A09 or AL/TL. AL/TL are easier as VERSION.mbn in UPDATE.zip doesn't have Global strings in it.
From what it seems, if you flash L09 on L29 or vice versa you get endless OTA updates for preload and cust. I don't know if just flashing the cust and preload zips fixes it, but you're free to try if you want.
Here's L09 preload and cust:
Preload: http://update.hicloud.com:8180/TDS/...full/update_full_preload_BLA-L09_hw_eu_R1.zip
Cust: http://update.hicloud.com:8180/TDS/...4//f1/full/update_full_cust_BLA-L09_hw_eu.zip
modified tool to include preload and cust:
https://mega.nz/#!oDR2DYCI!SRQlTq1IriGcEt1Wr--ggrBk7uZ4M_R8OwE6DdvmEEc
Extract and put in the EMUI 9.0 to 9.1 update folder.
Rename cust zip to update_cust.zip and preload to update_preload.zip, put in ZIPS-HERE folder, run modified bat.
Thank you very much, I try very soon. Have any of you done that already?
MagicBox96 said:
Thank you very much, I try very soon. Have any of you done that already?
Click to expand...
Click to collapse
I did on L29 with L29 preload and cust, no problems.
Base (280955) seem to be the same for both L09 and L29 C432.
MagicBox96 said:
Thank you very much, I try very soon. Have any of you done that already?
Click to expand...
Click to collapse
Soon i will upload a new tool that will let you flash all the 3 files, so you could wait. Also, a fried of mine is testing on BLA-L09 C432.
Perfect, also because I don't have the Root permissions on the device, and I don't even have twrp. In fact now I have tried and says that it does not find root permissions. Then I did not understand if the phone should be connected from on, in recovery or fastboot?
MagicBox96 said:
Perfect, also because I don't have the Root permissions on the device, and I don't even have twrp. In fact now I have tried and says that it does not find root permissions. Then I did not understand if the phone should be connected from on, in recovery or fastboot?
Click to expand...
Click to collapse
Tool updated. However, if you don't have root, you can't use it, you must root first.
Okay, I thought it was a tool like the ones we made earlier to install EMUI 9. I'll wait until the new tool is released. : D