I had to take my phone apart and remove/reconnect main PCB. Everything works, but the stylus. Phone does not even report stylus being out of the slot and does not react to it. Finger is detected just fine. Anyone experienced this? I checked the setup and everything is on
Any ideas?
Yea same problem but at first it would recognize the pen just around the edges and corners of the screen now it doesn't recognize the pen at all but it does recognize it when it's removed and replaced back into the phone...... I'm pretty sure it's because the sensor is not plugged in all the way when I put my phone back together I've been hesitant to pull it back apart just because every time you do you are risking breaking the $250 screen and digitizer
Related
Well ive had my phone for a while with hyperdragon iv iolite working completely fine without any hardware or software issues for months. Today i took out the battery of the phone, and put it back in and turned it on, but when the phone turned on, the touch scrren is not responding to anything. everything works fine with all the buttons and keyboard, but the touchscreen isnt working. What could have gone wrong just by taking out the battery. I also havnt dropped or damaged the phone in anyway so i dont see it being a hardware problem. Thanks. I really need help
I have heard of people who has been able to solve this problem by hard resetting the devise. I have had not such luck....comes to be that from sliding wear and tear the connector to the screen gets damaged. My screen is completely disable, I found someone that was able to buy a second hand phone on ebay and was able to switch the connector. Looks like to much of a hassle to me, so Im sticking with this until I switch phones.
My Droid's touch screen isn't working in the center vertically all the way down. I can still use the 'edges' of the screen. I need to use the middle of the screen for a few things (not transfering stuff over). Is there any way I can 'project' my Droids screen to my computer and click/touch in it to use it?
Thanks in advance for all help. It's appreciated
~mfungah
Edit: This is the original Motorola Droid.
I have the same problem on the right side of my milestone :S
I had the same problem, but from the back arrow upwards, specially when the phone got hot. As my phone was still on the warranty period, I flashed it back to stock and updated it to the official 2.2., took it to an Orange shop and got it back after almost a month: they basically changed the whole top part of the phone (I got a brand new screen )
Repair problem
I had a same failure. The touch panel was bad. I ordered one from eBay. It also came as well put it. It works well. Only so much wrong with me that for some reason the phone stacked in landscape mode, I can't change to portrait mode. What is wrong? I put together something wrong? I do not think so. Everything else goes. (or so it seems)
This has to do with the digitizer (the glass you touch over the top of the LCD you see) being defective or unsealed. This is due to environmental moisture finding its way into the phone and f**king with the electrictal signals sent by touching the screen. There is a 'phantom touch' issue that seems to happen before or during the vertical unresponsiveness, and that can usually be temporarily remedied by firmly pushing your screen downwards (your phone may restart) and taking a blowdryer to your phone until it's just hot enough to be uncomfortable to hold (and no longer take it into the bathroom while you shower). One way or another, you're going to have to replace your digitizer eventually.
Sent from my Droid using XDA App
I had the same problem months ago but it's now fixed.
STEPS:
1. Digitizer I bought from this guy:
http://cgi.ebay.ph/New-Touch-Screen-Digitizer-Motorola-Milestone-A853-/270780531 891?pt=UK_Replacement_Parts_Tools&hash=item3f0bc704b3#ht_2811wt_850
2. Dissasembly Videos (I advice you to watch them repeatedly before dissasembly):
http://www.youtube.com/watch?v=6d7ETMfgq2s
http://www.youtube.com/watch?v=dE81IaQHEHc
3. Phillips screw driver( for dealing with hard screws around the screen): Because I don't want you to use the low quality screw driver supplied with the digitizer.
4. Double sided tape: I got mine from a hardware shop for only P19. Buy a the more expensive tape(P100+) but look for a very thin one! You will use the cheap weak tape to stick some internal parts and use the Hard tape to stick the external casing. EDIT: I just used the cheap one for everything and it's strong enough.
5. PATIENCE: Don't be in a hurry. I even paused from time to time to get a better idea about what to do next. Get the feel of being a perfectionist (that same additude when I applied a screen protector )
That's the guide from me who haven't dissasembled a phone in my entire life but my milestone. So if something bad and technical that happens along the way then my knowledge can't help.. sorry.
Good luck bro!!
Hello, guys!
Recently I bought an HTC One with cracked digitizer, but functional. It had a lot of scratches etc, but this is not important right now. I wanted to do a complete make-over so I bought replacement parts from the internet, I bought the front housing with the LCD screen and the back cover. I dissasembled the phone from the old housing (the one with the broken digitizer), and I assembled it back on the new housing. After all of that, I powered on the phone and it worked like a charm (the LCD and the touch-screen worked perfectly), but then I saw that the glass was a little out, I mean it was upper than the speakers cover, so I decided to take out the whole screen and to change the adhesive, because it was too loose and the screen wasn't staying properly. I succesfully did that, i put the screen back and everything was good, but when I wanted to start the phone, the screen remains black. And this is the problem I have. I mention that I worked very carefully with the screen, so I don't think the problem is at the screen. I disconnected and reconnected all the cables and still doesn't work. When I press the power button it vibrates and then it's making that sound like the phone is booting, but no image on the LCD. If I keep the power button pressed, the back and home buttons are blinking and then the same story as before, vibrates and then the sound. I really don't know what could be the problem.
I really need some help with this and I'm open to all of your suggestions. If you want more informations feel free to ask.
Thanks in anticipation!
To me it looks like you damaged one the flat flex cable.
When you took the screen out did it come like suddenly and maybe some tension was applied to the flat flex?
If I were you I would take it apart and verify the connection in the socket, maybe the socket was damaged or something and it doesn't make a good connection
I hope it works out for you
Thank you for your answer!
When I took out the screen, I took it out very carefully and there wasn't any tension applied to the flex cable, so I don't think this is the problem. I think it's more likely a problem with the socket on the motherboard, like you said, and it's not making a good contact. But what can I do about that?
Hey guys I have a question. I recently changed the screen on my note 4 to a new non cracked one. Now I tried the screen with the s pen before I took the phone apart so I knew it worked. Well once I got the phone all back together the s pen on the new screen doesn't work anymore. What would control the s pen in the phone hardware wise that would make it stop working? I tried all the software troubleshooting ideas other than reloading the rom. Anybody have any ideas?
Probably the s pen ribbon cable not connected properly. I had the same issue when I personally repaired my n4. Realized it after the same issues u have and had to separate the lcd from the frame to easily connect both ribbon cables the same time.
Thanks. I'll check it out.
Did you manage to fix it? I have same problem. I got mine fixed at a phone repair shop. When I remove the s pen, the air command pops out but when I touch the screen, nothing happens.
svtthis said:
Thanks. I'll check it out.
Click to expand...
Click to collapse
Screen has brown copper screen behind it, if you break that your spen wont work, also spen connector is pain is behind to put it back if you open the screen from back not from front, make sure its fully in use flash light to see
I've got a replacement screen that my friend had in his house. Mine was broken (both the display and the digitizer, the latter was acting very weird). I did the replacement myself, and when I was finally done, I noticed something. The Touch Screen wasn't working (I could see the image but no input was recognized). I tried opening it and checking every single cable to see if there was anything wrong, but there was nothing looking broken or out of place. When I was going to test it, I noticed another very weird thing. It actually works if I keep the back of the phone off (not the back interchangable cover, I mean the back of the phone that is screwed in place). The problem is that this phone has a very annoying design that makes it so the Wi-Fi, Speakers, Camera and some other stuff don't function well with the back plate off, speacially the Wi-Fi.
I trully have no idea what is happening or what is causing the problem with the touch screen, and have no idea why the back plate makes the screen act funny. Can someone please help me figure this out?
Perhaps something in the digitizer's flex cable is shorting with the back panel. Try putting a layer of electrical tape between the flex cable and the back panel.