Hi,
I had no problem until magisk v12, but i recently tried v13.1 and v13.2 and both failed during upgrade through magisk manager 5.0.4 and 5.0.5.
I also tried to install it directly from twrp 3.1.0.0. The install finished in a good way but when i reeboot i can check that magisk is not installed anymore.
I am running marshmallow on an alcatel idol 3.
By the way my sd storage is adoptable but i did have problem until v12.
Thanks for your help.
For me, 13.1 and everything before installed fine but 13.2 will not, I always get "installation error". I manually updated the manager, but it does not help.
Hi, same problem here, i can't update magisk, it says installation error.
How to solve that ?
I use rooted nougat on s7 edge
Anyone with this issue should post a recovery log from flashing the zip in recovery. In TWRP, go to Advanced - Copy log.
Same here ... no update possible 12-> 13.3
UPDATE: Hi guys, it me again.. I finally solve my problem with my phone Samsung S6 Edge SM-G925F.
first of all, I want to thank you Xda community who help to fix this problem and it was great to have very kind people
this solution only happen with my device samsung s6 edges, I am not sure about other devices, but here it goes
1.) go to https://build.nethunter.com/android-tools/no-verity-opt-encrypt/
2.) download latest zip
3.) remember! uninstall ur Magisk first and make it clean
4.) flash those zip file from no-verity-opt-encrypt-6.x.zip and reboot but never install Magisk yet! NEVER!
5.) Wipe all cache.. and reboot, make sure it reboot properly, OK.
6.) proceed go to recovery TWRP and flash Magisk 15.0
7.) this will take 10-20 minute, after reboot success.. install Magisk Apps
8.) you will notice that u already got latest version of Magisk
for more detail about what just you read.. please read more from this thread
https://forum.xda-developers.com/apps/magisk/fix-bootloop-issue-magisk-14-6-15-0-t3725962
Special thanks to
Aria.A97 (starting thread I found)
Lemmy (solution from him)
-----------------------------------
Hi, I own samsung s6 edges SM-G925F
the older version of Magisk 14.3 working nicely on samsung s6 edge
but latest Magisk version 14.6 and 15.0 not working at all and stuck at samsung logo ..
my mission of this thread is to get the latest version 15.0 working on samsung s6 edges with help of xda community
here is what I just did
I upgrade Magisk 14.3 from the apps manager itself (5.4.0), and start rebooting
after that I stuck on samsung logo for about 24hour, I then proceed to wipe all data and lost everything and start from stock firmware again.. (ODIN)
after that
I install Samsung latest stock firmware again nougat 7, and flash custom recovery TWRP
and I install Magisk 15.0 from recovery, after installation finish without any problem I start to rebooting..
but same thing happen... stuck at samsung logo for very long time .. more than 5-10hour (this is not right)
I try to uninstall this latest version and reinstall Magisk (v14.3) again using TWRP.. I rebooting and it working again (waiting time only 20 minute and not an hour)
on the screen, I have Magisk app manager version 5.4.0, and it ask me to update to latest version again.. I know that if I update to
latest version , same thing will happen.. stuck at the boot loop and I don't understand why
I try again this time, it updating my Magisk app manager from 5.4.0 to 5.5.0 and also 5.5.1 (even latest by today)
I install Magisk v15.0 from the apps again and start rebooting.. after rebooting.. same thing happen! stuck in samsung logo
To conclude....
- I download everything only on XDA official thread including (Magisk Zip, Magisk Apps manager and Magisk Uninstaller) ALL IS LATEST
- I did Wipe all cache, delvick cache
- I did do factory reset
- I did many times wipe all cache
- I did manually flashing Magisk via recovery with TWRP (latest version as today)
- I did follow the instruction in Magisk official thread one by one
- but still stuck at the samsung logo for many hour and never recover.. untill I flashing older version magisk 4.3 to make it work again
I just cannot get this latest version Magisk 15.0 , only working for me is Magisk 14.3 without problem
please help.. I really want latest version with huge improvement
My devices info
- SM-925F
- Samsung S6 Edges
- International version
- Android 7.0
- Stock kernel 3.10.61-12414727
- Android security patch level 1 December 2017
4us said:
Hi, I own samsung s6 edges SM-G925F
the older version of Magisk 14.3 working nicely
but for latest version Magisk 14.6 or 15.0 not working
here is what I just did
I upgrade magisk 14.3 from the apps manager (5.4.0), and start rebooting
after that I stuck on samsung logo for about 24hour, I then proceed to wipe all data and lost everything and start from stock firmware again.. (ODIN)
after that
I install Samsung latest stock firmware again nougat 7, and flash custom recovery TWRP
and I install Magisk 15.0 from recovery, after installation finish without any problem I start to rebooting..
but same thing happen... stuck at samsung logo for very long time .. more than 5-10hour (this is not right)
I try to uninstall this latest version and reinstall version Magisk 14.3 again using TWRP.. I rebooting and it working again (waiting time only 20 minute and not an hour)
on the screen, I have Magisk app manager version 5.4.0, and it ask me to update to latest version again.. I know that if I update to
latest version , same thing will happen and I dont understand why
I try again this time, it updating my Magisk app manager from 5.4.0 to 5.5.0 and also 5.5.1 (even latest by today)
I install Magisk v15.0 from the apps again and start rebooting.. after rebooting.. same thing happen! stuck in samsung logo
- I did Wipe all cache, delvick cache
- I did do factory reset
- I did many times wipe all cache
- same thing happen..
I just cannot get this latest version Magisk 15.0 , only working for me is Magisk 14.3 without problem
please help.. I really want latest version with huge improvement
My devices info
- SM-925F
- Samsung S6 Edges
- International version
- Android 7.0
- Stock kernel 3.10.61-12414727
- Android security patch level 1 December 2017
Click to expand...
Click to collapse
Did u try flashing Magisk v15.0 zip manually via TWRP & not installing from the app? If not, give it a go. If it boot loops, you can flash v14.3 again.
Sent from my Moto G3 Turbo Edition
Grab a logcat when the device is bootlooping and then upload that together with the Magisk debug log (you can pull it from /data/adb/).
Yup, seeing a similar thing on a Samsung Galaxy Tab S2. Upgrade to 15 looked like it worked, rebooted, now stuck on the throbbing Samsung logo, can't get back in to Android
Help!!
I have the same problem as your only version that I see stable in this team is the 13.3 that passes the safety net the other versions like 15 and 14.6 are left in boot infinite I have the Android version just like you with the same security patch December 1, 2017 I look forward to prompt help to update the magisk
My device
SM-925I
---------- Post added at 11:31 AM ---------- Previous post was at 11:26 AM ----------
Have you achieved to operate the samsung pay mini with magisk?
Same problem SM-G925F nougat 7.0 stock magisk 14 - > 15
OMG i stucked on boot with 15.0 too. Whats the problem. What is the solution??
EDIT i have the solution right now tested it and working. download magisk unistaller and magisk 14.0. Enter the twrp first flash magisk uninstaller and after that flash magisk 14.0. Here we go
Also I do not work new versions !!!
By popular demand:
Grab a logcat when the device is bootlooping and then upload that together with the Magisk debug log (you can pull it from /data/adb/).
Try this method, with me on the S7 edge Nougat 7.0 Stock without any problem Magisk v15:
What I did:
1. I cleaned the cache and data of the magisk manager application and uninstalled it
In TWRP I made:
2. Magisk uninstaller
3. I restored the stock boot
4. I installed the latest version of Magiskv15
5. Reboot and everything works
I couldn't find a way to recover (I didn't know about the Magisk uninstaller), so I ended up ODIN flashing the whole Tab and am having to set everything back up from scratch again. Bummer.
edit: And just for fun since I was wiped already, I tried the Magisk 15 zip on a 100% clean device. Immediately hung at throbbing Samsung screen on boot. No action at all.
So yeah, it looks like Magisk 15 is a no go on newer Samsung stuff. I did upgrade my Nexus 5 to v15 with no issues :\
edit2: Magisk 15 -> Fail to boot -> Flash Magisk Uninstaller -> Flash Magisk 14 -> Successful boot!
So if I would have done the uninstall and re-flash, I probably could have recovered with out wiping the whole device. Bummer
Hope this helps some people...
Same thing on Honor 8 when I updated via MM > bootloop
Uninstaller didn't worked > bootloop
I backup with old twrp nandroid backup ^^
Tried again flashed v15 via twrp > bootloop
Tried with v14.6 > bootloop
Can't anymore install/root Magisk :'( :'(
Someone have a older of 14.6 version maybe I could try
same...
1. magisk 14.5 -> update (from app, install mode: direct flash)-> install v15 reboot -> Samsung Logo ( ~ 10 min )
2. TWRP -> uninstall magisk -> wipe cache & dalvik -> install 14.5 -> Boot (and reboots) OK
3. Reboot TWRP -> update/install v15 -> reboot System -> Samsung Logo :/ ( ~ 10 min )
again ... step 2
4. Reboot TWRP -> update/install v15 (wipe cache & dalvik after) -> Samsung Logo :/ ( ~ 10 min )
again ... step 2
5. TWRP -> uninstall magisk -> wipe cache & dalvik -> install 15.0 -> Samsung Logo :/ ( ~ 10 min )
again ... step 2
6. TWRP -> uninstall magisk -> (No wipe) -> install 15.0 -> Samsung Logo :/ ( ~ 10 min )
etc ...
SM-G925F -> SuperStock S8 by BugTracker UP1 -> magisk 14.5 = No probs ....
--- EDIT ---
Spartacus500 said:
Try this method
Click to expand...
Click to collapse
ok ... lets try
--- EDIT2 ---
@Spartacus500 : Guess What .... Samsung Logo :/ ( ~ 10 min )
Doesnt work on my Redmi 3s either
I can confirm that Magisk 15 doesn't work on the G925K. Phone refuses to boot at all. I have to force it to restart into download mode before even am able to boot into recovery. Still trying to get it running without a hard format, but thus far it's not looking good for me.
I'm on Ultimate Nougat S8+ Port V2 ROM.
Update 1: Dirty flashing the ROM works.
Update 2: Dirty Flash worked up to the point of "optimising apps", once the process was finished, the phone rebooted and went into boot loop again. Doing system wipe now as I've got no choice.
NoGo on Axon 7 too. Updating thru Magisk Mngr succeded, but no root after. Reverted to v14.5 by TWRP is mostly working but the list of apps with root access is messed up - some apps have root access but not listed.
Guys have you tried flashing dm-verity disabler by jcadduono after flashing Magisk?
[Insert General Disclaimer Here]
Link: https://build.nethunter.com/android-tools/no-verity-opt-encrypt/
@Didgeridoohan That's so early in the boot process adb reports device as Offline so don't expect logcats from average Joe. Samsung Devices doesn't boot with custom recovery and dm-verity enabled, Magisk 15 no longer disables dm-verity by default so...
Aria.A97 said:
Guys have you tried flashing dm-verity disabler by jcadduono after flashing Magisk?
Link: https://build.nethunter.com/android-tools/no-verity-opt-encrypt/
Click to expand...
Click to collapse
This is strange. I already had dm-verity disabled. Flashing 6.0 fixed the 15.0 problem. My phone successfully boots now despite having 15.0 (I'd already uninstalled it and flashed 14.0 onto it, but I reflashed 15.0 to check your suggestion out).
FallenAngelII said:
Unless the latest version of Magisk turns it on for some reason, it shouldn't matter. dm-verity was already disabled for me.
Click to expand...
Click to collapse
That's strange. I am using S6 running December 2017 Security Patch and Magisk 15 works just fine
Also quote from Magisk Thread:
If dtbo.img is detected on your device, KEEPVERITY is enabled by default. If your device is already encrypted, KEEPFORCEENCRYPT is enabled by default.
Click to expand...
Click to collapse
Aria.A97 said:
That's strange. I am using S6 running December 2017 Security Patch and Magisk 15 works just fine
Also quote from Magisk Thread:
Click to expand...
Click to collapse
I updated my post. It was dm-verity. Apparently, installing 15.0 magically turns it on again for some idiotic reason.
hi
can not install magisk 16.0 on lineage 14.1 for i9100 ?
how fix this ERROR ?
Try this (I can not assure you that this will work, since I don't own your device):
1 - Open your LineageOS build zip with some file manager.
2 - Extract the "boot.img" file to somewhere else.
3 - Now go to twrp, tap install, then install image, find and flash the "boot.img" you just extracted.
4 - Don't reboot yet, go back and try to flash magisk, then reboot if you succeed.
It worked with me once. Worth a try.
--
Have you tried the beta version already?:
https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589
sajjads24 said:
hi
can not install magisk 16.0 on lineage 14.1 for i9100 ?
how fix this ERROR ?
Click to expand...
Click to collapse
The S II is quite an old device, and I believe it never got officially updated past Android KitKat, right? Might be why...
Even though the OS is updated by a custom ROM, the boot image may lack the necessary parts for Magisk to patch. At least, that's what your log shows...
You might get more help if you ask around in your device's forum.
Edit: Yup... https://forum.xda-developers.com/showpost.php?p=76705332&postcount=25084
Dear supporters,
I have a Huawei P8 (GRA-L09) build number: GRA-L09C423B520, EMUI 4.0.3.
My device have official Android Marshmallow installed with latest OTA updates.
Recently I'm getting notifications from some APPs I need to keep using that I'm running Android v. 6.0 and have to upgrade to Android v. 7.0 at least to continue using them .. and as I have no money to purchase a new devioce, I was trying to get Android ROM 7.0 on my device, this procedure needed to firstly ROOT my device;
I've tried many of your forum guides to ROOT my device, no success! Mayby because my device has a higher build number that what described in your guides! I don't know ...
Steps I managed to successfully finish:
- Installed most recent USB driver on my Windows 10 desktop
- Installed adb/fastboot on my desktop
- Unloacked my device (Huawei p8) bootloader
- Installed twrp-3.1.1-0-grace image on my device
- Not succeeded to install superSU 2.82 via TWRP on my device;
So I'm stuck now! I can't go further installing Android 7.0 Nougat custom ROM ...
Can anyone help me please?
Thanks ...
you can try to flash magisk
TimMeerveld said:
you can try to flash magisk
Click to expand...
Click to collapse
I'm a new to these stuff
Can you please send me some more details ?
Thanks
Well you can download magisk manager from here: magiskmanager dot com then drag the zip file to your phone and startup twrp then install then select magisk manger.zip and flash it away
I can't get root. I have a locked bootloader so i need root to unlock it.
If you have root, what software did you use @MidEasterner?
Magisk dropped support for Huawei @TimMeerveld
Hi, anybody had a successful install SuperSU or Magisk SU?
Magisk used to be installed direct method, but since It had been upgraded to patch boot.img model, I can`t find a way how to install it.
SuperSU install work right after system root and cause a boot loop after reboot. There were a successful stories for Flyme 7, but I can`t find an exact flash version, which works with that.
Meizu Pro 6
Android 7.1.1, Flyme 8.0.5.0A