Database Develop

[Q] Samsung Galaxy Note Will not On?(BLACK SCREEN)

i have a samsung galaxy note(GT-N7000) and it was working fine until
i accidentally flashed a samsung Galaxy SII STOCK firmware on it from Odin the flasing completed successfully but the device is with a black screen does not boot to download mode or recovery mode.
Please i need a solution

Have you tried a battery pull? Leave battery out of Note for about two-to-three minutes. Then try booting into recovery mode again?
Are you using volume up+ home then hold power until you get welcome screen for recovery?
If you have a backup from when you first got your note, try download mode - volume down + home then hold power until you get the welcome splash screen.

Still Not Working!!!
TempusFudgeIt said:
Have you tried a battery pull? Leave battery out of Note for about two-to-three minutes. Then try booting into recovery mode again?
Are you using volume up+ home then hold power until you get welcome screen for recovery?
If you have a backup from when you first got your note, try download mode - volume down + home then hold power until you get the welcome splash screen.
Click to expand...
Click to collapse
i tried but it will not boot at all no recovery mode no download mode
But it was working before i accidentally flash SII Firmware
is there a way to flash back the note firmware without going to download mode because the device will not boot

Help!!!
Please Reply Devolopers

While your Note is connected to PC Odin, try to get into download mode (vol down + home + power) then vol up, until you see there is connection in Odin (COM:ID turns yellow). Hopefully you still have 'life' there but just no screen/sound. Once you have that, flash a Note's firmware.

Sorry to say mate but your next and the only step is nearest samsung service center! :-(
BOOMED from my BOMBASTIC NOTE

betatest512 said:
i have a samsung galaxy note(GT-N7000) and it was working fine until
i accidentally flashed a samsung Galaxy SII STOCK firmware on it from Odin the flasing completed successfully but the device is with a black screen does not boot to download mode or recovery mode.
Please i need a solution
Click to expand...
Click to collapse
Please do this:
1. Replace battery
2. Insert batery
3. Hold down volume key + home key + power key for 15s to 20s
4. Press volume up key
5. Open Odin
6. connect your phone to pc
7. flash new bootloader(2.tar) by odin
Please see this link: http://forum.xda-developers.com/showthread.php?t=1354888
and download attachment file then extract it and choose 2.tar to flash.
After complete your phone can boot to download mod and you must flash original rom for galaxy note by download form www.sammobile.com
Good luck.

Wrong flash file
Happend to me to because av samfirmware´s system to list other phones firmware under the categorie "Latest Firmware" after searching for N7000....not good at all.
Of course i should have read more careful but after flashing cells since a few years back i did not think i could fall for that ;-)
So flashing the bootloader helped me back on track, got the screen back and started over with original fw. Thanks for the tip!

same problem here
i tried your answer. still no live on computer what should i do. phone is samsung galaxy note SHV-E160K
ysambo said:
Please do this:
1. Replace battery
2. Insert batery
3. Hold down volume key + home key + power key for 15s to 20s
4. Press volume up key
5. Open Odin
6. connect your phone to pc
7. flash new bootloader(2.tar) by odin
Please see this link: http://forum.xda-developers.com/showthread.php?t=1354888
and download attachment file then extract it and choose 2.tar to flash.
After complete your phone can boot to download mod and you must flash original rom for galaxy note by download form www.sammobile.com
Good luck.
Click to expand...
Click to collapse

ysambo said:
Please do this:
1. Replace battery
2. Insert batery
3. Hold down volume key + home key + power key for 15s to 20s
4. Press volume up key
5. Open Odin
6. connect your phone to pc
7. flash new bootloader(2.tar) by odin
Please see this link: http://forum.xda-developers.com/showthread.php?t=1354888
and download attachment file then extract it and choose 2.tar to flash.
After complete your phone can boot to download mod and you must flash original rom for galaxy note by download form www.sammobile.com
Good luck.
Click to expand...
Click to collapse
Thanks i found this... i've managed to get the download mode back and restore original firmware.. thanks bro :good:
lentzit said:
Happend to me to because av samfirmware´s system to list other phones firmware under the categorie "Latest Firmware" after searching for N7000....not good at all.
Of course i should have read more careful but after flashing cells since a few years back i did not think i could fall for that
So flashing the bootloader helped me back on track, got the screen back and started over with original fw. Thanks for the tip!
Click to expand...
Click to collapse
Yeahh me too, has the same problem and solved it

ysambo said:
Please do this:
1. Replace battery
2. Insert batery
3. Hold down volume key + home key + power key for 15s to 20s
4. Press volume up key
5. Open Odin
6. connect your phone to pc
7. flash new bootloader(2.tar) by odin
Please see this link: http://forum.xda-developers.com/showthread.php?t=1354888
and download attachment file then extract it and choose 2.tar to flash.
After complete your phone can boot to download mod and you must flash original rom for galaxy note by download form www.sammobile.com
Good luck.
Click to expand...
Click to collapse
Wow dude.
This worked for me to.
I wanted to flash a Rom but it did not work.
So i flashed back to stock Rom that i downloaded from sammobile.
This resulted in a black screen. Flashed a earlier version...still black screen.
But i noticed that the phone worked normally accept the screen was black.
I tried a few thing's until i found this. Genius!
Thanks for sharing dude.

Hmm i tried the steps mentioned, I think i managed to flash the original n7000 firmware and rom, but unfortunately i still see black screen. I can hear the starting tone of samsung while booting up thought, so my system is still working, jz the screen is not. Oh boy, could that be hardware issue then? Anyone knows how to check?

Boot Loop

Hi.. I am little new with Note with ICS
It has entered in a boot loop where it reaches the home screen. and in about 10 sec reboots itself. I tried taking out the battery, still same problem. Than I tried putting it in recovery mode and resetting it to factory settings by pressing power,up volume and home button together, but it want go to recovery mode, samsung logo and model no comes up than black screen and again samsung logo and model no. Tried it with pluged in to PC as well.
Any help will be appreciated
Thanx
Abdur

Hello abdurm, could you tell us your current firmware? You would require to give us details from Settings > About phone.
Also, did you try flashing anything? If so, what was it?
By pressing the Volume Down button + Home button + Power button simultaneously, does your device enter Download mode?

YLNdroid said:
Hello abdurm, could you tell us your current firmware? You would require to give us details from Settings > About phone.
Also, did you try flashing anything? If so, what was it?
By pressing the Volume Down button + Home button + Power button simultaneously, does your device enter Download mode?
Click to expand...
Click to collapse
It dosen give me enough time to check firmware version, it reboots. It is on ICS. It is stock and I have not tried fashing or anything.
Yes it goes in download mode by pressing Volume Down button + Home button + Power button simultaneously.

Flash gingerbread rom in PC ODIN only and it will automatically reboot by itself but if still stuck in samsung logo go to recovery mode and wipe data and cache.

abdurm said:
It dosen give me enough time to check firmware version, it reboots. It is on ICS. It is stock and I have not tried fashing or anything.
Yes it goes in download mode by pressing Volume Down button + Home button + Power button simultaneously.
Click to expand...
Click to collapse
Download pre rooted gb rom from my signature and flash it via pc odin. Your phone must be in download mode and don't change any settings in pc odin.
Cheers

sahilarora2003 said:
Download pre rooted gb rom from my signature and flash it via pc odin. Your phone must be in download mode and don't change any settings in pc odin.
Cheers
Click to expand...
Click to collapse
Thank you very much. Just one last thing I dont have to be rooted to instal this ROM and it is ok to flash directly from ICS . Just downloadFilename: SGN_XX_OXA_KJ1_FACTORYFS.zip and flash it. And it will leave me with GB?

abdurm said:
It dosen give me enough time to check firmware version, it reboots. It is on ICS. It is stock and I have not tried fashing or anything.
Yes it goes in download mode by pressing Volume Down button + Home button + Power button simultaneously.
Click to expand...
Click to collapse
Apologies abdurm, I foolishly presumed you would have made a note of your device's firmware details at some point in the past. It was stupid of me to ask you for the said information.
abdurm said:
Thank you very much. Just one last thing I dont have to be rooted to instal this ROM and it is ok to flash directly from ICS . Just downloadFilename: SGN_XX_OXA_KJ1_FACTORYFS.zip and flash it. And it will leave me with GB?
Click to expand...
Click to collapse
1] Download the pre-rooted stock Gingerbread firmware, SGN_XX_OXA_KJ1_FACTORYFS.zip and extract it to get the SGN_XX_OXA_KJ1_FACTORYFS.tar file.
2] After doing so, run PC ODIN, select the PDA tab in it and point to the extracted file (SGN_XX_OXA_KJ1_FACTORYFS.tar). Auto Reboot and F.Reset Time will be selected by default. Do not select anything else.
3] Put your device in Download Mode and then connect it to your PC via the USB cable. The ID:COM label in PC ODIN will turn yellow indicating your device is connected and recognised.
4] Click on the Start button in PC ODIN and wait for the label above ID:COM to say Pass. After it does so, disconnect your device from your PC.
Your device will reboot and you will be on a stock Gingerbread firmware with root privilege.

YLNdroid said:
Apologies abdurm, I foolishly presumed you would have made a note of your device's firmware details at some point in the past. It was stupid of me to ask you for the said information.
1] Download the pre-rooted stock Gingerbread firmware, SGN_XX_OXA_KJ1_FACTORYFS.zip and extract it to get the SGN_XX_OXA_KJ1_FACTORYFS.tar file.
2] After doing so, run PC ODIN, select the PDA tab in it and point to the extracted file (SGN_XX_OXA_KJ1_FACTORYFS.tar). Auto Reboot and F.Reset Time will be selected by default. Do not select anything else.
3] Put your device in Download Mode and then connect it to your PC via the USB cable. The ID:COM label in PC ODIN will turn yellow indicating your device is connected and recognised.
4] Click on the Start button in PC ODIN and wait for the label above ID:COM to say Pass. After it does so, disconnect your device from your PC.
Your device will reboot and you will be on a stock Gingerbread firmware with root privilege.
Click to expand...
Click to collapse
Thank you very much, my note is finally working. How can I go to ICS, it doesnt show up in software update

abdurm said:
Thank you very much, my note is finally working. How can I go to ICS, it doesnt show up in software update
Click to expand...
Click to collapse
Hello again abdurm, I am glad to learn your device is up and running again. :highfive:
Now that you are on a rooted firmware, I would advice you not to avail an OTA update as there is a very high likelihood of it breaking/undoing the root privilege.
Personally, I have not ventured into Ice Cream Sandwich yet and thus I have no right to guide you with the process of acquiring it. But, based on your quoted post may I ask you if you desire to have stock Ice Cream Sandwich with or without root privilege?
I recommend you thoroughly read dr.ketan's threads which explain the subject at hand.

[Q] Please help, im in trouble :(

Hi everyone. I tried to install CM9 yesterday, did every step same as it is in tutorial and the phone is only entering recovery mode. When i start it up, SAMSUNG appears, and after that it is entering recovery mode... I can also enter Download mode without problems. What to do guys? Thanks in forward.
P.S. Phone is i9001, i saw that there is a special section for i9001 after i wrote here. Sorry

matoripodlac said:
Hi everyone. I tried to install CM9 yesterday, did every step same as it is in tutorial and the phone is only entering recovery mode. When i start it up, SAMSUNG appears, and after that it is entering recovery mode... I can also enter Download mode without problems. What to do guys? Thanks in forward.
P.S. Phone is i9001, i saw that there is a special section for i9001 after i wrote here. Sorry
Click to expand...
Click to collapse
you need to flash a i9001 boot loader , download from My Android Collections, link below
use odin 4.43, and do the following:
Click on the OPS button, then select the AriesVE.ops
Click on the BOOT button, then select the Boot_loader.tar file downloaded

xsenman said:
you need to flash a i9001 boot loader , download from My Android Collections, link below
use odin 4.43, and do the following:
Click on the OPS button, then select the AriesVE.ops
Click on the BOOT button, then select the Boot_loader.tar file downloaded
Click to expand...
Click to collapse
It's working. Thank u so much for fast and perfect answer.

[Q] flashing Samsung Galaxy S (i9000)

Hi guys:
I'm really new with the galaxy, and was trying to upgrade and flashing my galaxy, but this not working and now is not working any more . If I push the power on button, nothing happen, if I try to turn the galaxy in recovery mode (vol+, home and power on) not works, the only can I do is power on in mode "downloading...", I was reading in several internet pages several instruction in order to connect the pc to the galaxy trough Odin (v 1.3), this looks start working but then stop on SBL.bin and nothing happen later.....
Could somebody tell me a process in order to recovery my galaxy please??????
Thanks a lot!

If you can get into download mode follow my HOW TO Guide at bottom

thanks I will check
EwOkie said:
If you can get into download mode follow my HOW TO Guide at bottom
Click to expand...
Click to collapse
thanks I will check

is not working
EwOkie, I follow the process as you mention, and every is working properly in the first seconds, then, appear a message say <ID:0/008> sbl.bin, and the nothing happen......
could you help me?????
EwOkie said:
If you can get into download mode follow my HOW TO Guide at bottom
Click to expand...
Click to collapse

TWRP Galaxy J1 2016 Sm-J120H Spreadtrum SC8830 Really Working (Brazilian devices)

(DISCONTINNUED
This TWRP is only for Speadtrum 3G!!!!
Hi folks!
Finally we have a twrp for your Sm-j120H Spreatrum that works! Here's the link:
Root SM-J120H working.rar
http://www20.zippyshare.com/v/XmD4XuEW/file.html
If you want to test (do it for your own risk)!
STEPS:
1 - Unzip file on your computer;
2 - Open Odin folder and copy the supersu zip file to your internal memory (without unzip it);
3 - Open Odin (double click on blue icon);
4 - Click on "AP" icon and select the twrp tar file on Odin folder (j1 (6).tar);
5 - Turn on "Unlock OEM" and "USB Debugging" on Delevoper Options (Actvating Delevoper Options: seven clicks on Build Number - Software Info);
6 - Turn off your phone and turn on again holding Volume Down + Home Button + Power Button (Download Mode). When a screen with some texts appears, release all buttons and press Volume Up again to activate the Download Mode;
7 - After this, connect your phone to your computer and click Start on Odin. Wait until your device restarts;
8 - Disconnect your phone to your computer and turn it off. Turn it on holding Volume Up + Home Button + Power Button (Recovery Mode). When your phone vibrates and appears J1 6 logo, release all buttons. If worked, TWRp will starts;
9 - Select the language, click on Read Only and the TWRP starts. After this, click on Install and search The Supersu zip you copied. Click on it and drag the flash file. Wait finish it. Restart the system. Done!
Credits: Aldous Cariño (Galaxy J1 Edition Phillipines Facebook Group - (https://www.facebook.com/groups/SamsungGalaxyJ12016EditionGroupPhilippines/)
IMPORTANT!!!!!!
This twrp was tested and worked on brazilian devices. Others had some problems. Test it and comment your feedback here!
If you are a developer and interests to work on this file, but doesn't have the device, i'll be glad to help being your beta tester!!!!
If you need the stock rom, download it from this site: https://samsung-firmware.org/model/SM-J120H/
Thanks!

I tried this on a SM-J120M from Colombia.
Recocvery flashed OK, phone rebooted.
Turned it off, tried to enter recovery, android robot appears "installing system update" or something like that.
After a few seconds, standard recovery appears and not TWRP.
So I figured that the stock rom somehow replaces the custom recovery at first boot.
Flashed again but after Odin finished, I pulled the battery at once.
Tried again to enter recovery, this time a red text above the J1 logo shows "Recovery is not seandroid enforcing"
Pulled the battery again and turned on, phone booted normally, but twrp recovery was again replaced with standard recovery.
I'm on the latest firmware and this phone until now can not be rooted and no custom recovery seems to be available.
Somehow "knox" was set to 1 in the process, meaning warranty void.
Cheers.

Well, this has been tackled finally
Key issue was the right TWRP recovery.
Someone on Youtube posted the instructions and files titled: RECOVERY TWRP PARA SAMSUNG J1 2016 (TODAS LAS VERSIONES)
This time the TWRP recovery did work, after that I flashed the SuperSu from TWRP and all was finished.
Next I'll be looking for a custom rom, but so far very happy with the results.
Cheers.

escorpiompom said:
Well, this has been tackled finally
Key issue was the right TWRP recovery.
Someone on Youtube posted the instructions and files titled: RECOVERY TWRP PARA SAMSUNG J1 2016 (TODAS LAS VERSIONES)
This time the TWRP recovery did work, after that I flashed the SuperSu from TWRP and all was finished.
Next I'll be looking for a custom rom, but so far very happy with the results.
Cheers.
Click to expand...
Click to collapse
Hello,
Could I have a link to the files that work for the J120M? I have the same phone and I think I found what you're talking about but I have the same issue with the stock recovery showing up instead.
Thanks!
EDIT: Actually, do I need to use TWRP? Can't I just "install update from external storage" with the stock bootloader?

Sure, I didn't post the link because it may not be allowed on this board (for newbies like me).
If you just put that title in Youtube it shows as the first result.
Anyway, here is the direct link for all the files:
Code:
https://www.datafilehost.com/d/296cd14c
Disable the download manager that is checked by default.
Use odin to flash TWRP, disable auto reboot and after flashing enter recovery at once with vol up+home+power buttons.
You may get a warning in red about recovery not enforcing blaba, just wait until TWRP shows and release the buttons.
It's not possible to flash SuperSU from stock recovery, you need a custom recovery like TWRP.
I couldn't find CWM for this phone, but anyway I like TWRP more.
Cheers.

escorpiompom said:
Sure, I didn't post the link because it may not be allowed on this board (for newbies like me).
If you just put that title in Youtube it shows as the first result.
Anyway, here is the direct link for all the files:
Code:
Disable the download manager that is checked by default.
Use odin to flash TWRP, disable auto reboot and after flashing enter recovery at once with vol up+home+power buttons.
You may get a warning in red about recovery not enforcing blaba, just wait until TWRP shows and release the buttons.
It's not possible to flash SuperSU from stock recovery, you need a custom recovery like TWRP.
I couldn't find CWM for this phone, but anyway I like TWRP more.
Cheers.
Click to expand...
Click to collapse
Ahh, thanks! As it turns out I did find the correct link, but the trick was to immediately enter into recovery mode after flashing without letting the phone fully boot first. Got my phone rooted now, thanks a bunch!

This method workin on 100%/ Thanks!

amebablues said:
Hi folks!
Finally we have a twrp for your Sm-j120H Spreatrum that works! Here's the link:
Root SM-J120H working.rar
http://www20.zippyshare.com/v/XmD4XuEW/file.html
If you want to test (do it for your own risk)!
STEPS:
1 - Unzip file on your computer;
2 - Open Odin folder and copy the supersu zip file to your internal memory (without unzip it);
3 - Open Odin (double click on blue icon);
4 - Click on "AP" icon and select the twrp tar file on Odin folder (j1 (6).tar);
5 - Turn on "Unlock OEM" and "USB Debugging" on Delevoper Options (Actvating Delevoper Options: seven clicks on Build Number - Software Info);
6 - Turn off your phone and turn on again holding Volume Down + Home Button + Power Button (Download Mode). When a screen with some texts appears, release all buttons and press Volume Up again to activate the Download Mode;
7 - After this, connect your phone to your computer and click Start on Odin. Wait until your device restarts;
8 - Disconnect your phone to your computer and turn it off. Turn it on holding Volume Up + Home Button + Power Button (Recovery Mode). When your phone vibrates and appears J1 6 logo, release all buttons. If worked, TWRp will starts;
9 - Select the language, click on Read Only and the TWRP starts. After this, click on Install and search The Supersu zip you copied. Click on it and drag the flash file. Wait finish it. Restart the system. Done!
Credits: Aldous Cariño (Galaxy J1 Edition Phillipines Facebook Group - (https://www.facebook.com/groups/SamsungGalaxyJ12016EditionGroupPhilippines/)
IMPORTANT!!!!!!
This twrp was tested and worked on brazilian devices. Others had some problems. Test it and comment your feedback here!
If you are a developer and interests to work on this file, but doesn't have the device, i'll be glad to help being your beta tester!!!!
If you need the stock rom, download it from this site: https://samsung-firmware.org/model/SM-J120H/
Thanks!
Click to expand...
Click to collapse
hi bro
not working ext sd card or otg . how to fix it ? iwant install patch file my phone is locked by user code and i cant copy file to internal storag
thank you

anitamobile said:
hi bro
not working ext sd card or otg . how to fix it ? iwant install patch file my phone is locked by user code and i cant copy file to internal storag
thank you
Click to expand...
Click to collapse
This file is for Spreadtrum 3G devices. OTG not working at all. FOr ext card, try to wipe data and cache after install and reboot.

tried it on my SM-J120G, but failed .. all steps completed but when i started the phone in recovery mod, it got stuck at j1 2016 logo and a message in red fonts saying ''RECOVERY IS NOT SEANDROID ENFORCING''. After i just tried to switch off and on, but the screen dosent respond. After holding all physical button, vol up-dn, power and home, it got restarted in normal mode.

device tree
please give me device tree of this device .. please

Does it works in sm-j120G??

anitamobile said:
hi bro
not working ext sd card or otg . how to fix it ? iwant install patch file my phone is locked by user code and i cant copy file to internal storag
thank you
Click to expand...
Click to collapse
The problem has been resolved
new recovery twrp :fingers-crossed:
https://forum.xda-developers.com/android/development/recovery-twrp-j120h-supports-otg-t3562136
---------- Post added at 12:11 AM ---------- Previous post was at 12:06 AM ----------
amebablues said:
This file is for Spreadtrum 3G devices. OTG not working at all. FOr ext card, try to wipe data and cache after install and reboot.
Click to expand...
Click to collapse
The problem has been resolved :good:
new TWRP :highfive:
https://forum.xda-developers.com/android/development/recovery-twrp-j120h-supports-otg-t3562136

Project Discotinnued
Sorry taking too long to answer...I'm not using this device anymore. Maybe this link help you: https://github.com/joenka/android_device_j120h
Best regards

shugash said:
Does it works in sm-j120G??
Click to expand...
Click to collapse
Not testing. If you waana try, do it your risk.

syria-droid said:
The problem has been resolved
new recovery twrp :fingers-crossed:
https://forum.xda-developers.com/android/development/recovery-twrp-j120h-supports-otg-t3562136
---------- Post added at 12:11 AM ---------- Previous post was at 12:06 AM ----------
The problem has been resolved :good:
new TWRP :highfive:
https://forum.xda-developers.com/android/development/recovery-twrp-j120h-supports-otg-t3562136
Click to expand...
Click to collapse
Ok. But your device is Speadtrum 3G? This twrp is for this model.

amebablues said:
Ok. But your device is Speadtrum 3G? This twrp is for this model.
Click to expand...
Click to collapse
I know
the problem Present in all phones model (j120h)

Rooted j120g
Bro I have rooted my j120g
Want to know how to root contact me bro
[email protected] or fb id skrillex cario

Hai is it possible to flash stock 120g firmware on 120h ? Please reply

Help me to Root my Samsung Galaxy J1 (2016) SM-J120H
Sir I really need your help. What is the first thing to do before going into Rooting method? Do I need to backup any Files or what? Thnak you. Guide me please. Thank You