Recently i'm just update the Huawei android version, but after restarted the phone, it's keep stuck on the manufacturer logo, unable boot into the main screen.
I did try to press Volume key + and Power unfortunately unable to enter the recovery mode, please help.
Send it to service
If you haven't unlocked the bootloader/installed TWRP/Rooted, then yes I'd agree with the above comment and send to service.
Otherwise follow the instructions here.... https://forum.xda-developers.com/p10/help/tutorial-recovering-p10-p10-brick-t3600211
amonev said:
Send it to service
Click to expand...
Click to collapse
I'd asked the service center but they said will wipe my data, is there anyway to retrieve the data back?
Just for understanding: Did you unlock your Bootloader?
Jannomag said:
Just for understanding: Did you unlock your Bootloader?
Click to expand...
Click to collapse
No, i didnt unlock bootloader.
Did someone managed to fix that? I have same problem.
I used hisuite to install pie update on my p10 and it started bootlooping.
Button combinations for fastboot, factory reset etc dont work, cant even shut down phone unless disconecting battery from the motherboard.
i have the same problem, i didn't do anything it just happened and now i don't know what do, please help
sayfsami said:
i have the same problem, i didn't do anything it just happened and now i don't know what do, please help
Click to expand...
Click to collapse
Have you tried to do Factory Reset and/or (re)Install latest firmware and recovery from eRecovery (switch off, conncect to charger, keep pressing Vol+ and then boot by Pow)
zgfg said:
Have you tried to do Factory Reset and/or (re)Install latest firmware and recovery from eRecovery (switch off, conncect to charger, keep pressing Vol+ and then boot by Pow)
Click to expand...
Click to collapse
i can't access recovery mode, the phone keeps boot looping until the battery is drained, i tried to access recovery mode with the boutons combination to do a factory reset but i can't access it, it doesn't work, the phone stays stuck in the boot loop, i actually don't know how to install the firmware i didn't find it.
once the phone has some power it starts booting and rebooting until the battery is drained, when i plug it it starts booting and rebooting on it's own.
sayfsami said:
i can't access recovery mode, the phone keeps boot looping until the battery is drained, i tried to access recovery mode with the boutons combination to do a factory reset but i can't access it, it doesn't work, the phone stays stuck in the boot loop, i actually don't know how to install the firmware i didn't find it.
once the phone has some power it starts booting and rebooting until the battery is drained, when i plug it it starts booting and rebooting on it's own.
Click to expand...
Click to collapse
eRecovery is different from Recovery (I wrote above the phone to be connected to charger while booting with Vol+ kept pressing; in Recovery there is no option for Installing the latest - but the option is present in eRecovery), but anyway, you probably cannot boot to eRecovery either ;(
It could be also possible to reinstall firmware from HiSuite but you could not connect if you cannot boot
For flashing from Fastboot, you must have Bootloader and FRP unlocked (but to unlock, you must first boot to the system)- if I understood correctly, you didn't play with Bootloader, Fastboot, flashing, etc yet, hence your FRP and BL are locked
Uhm can anyone help me? pls. I unlocked my bootloader and flashed open kirin AEX P1 Beta and it caused me bootloop maybe because I fail to factory reset the second time or at least can I reflash the custom rom to make it work again but I can't access my p10 on fastboot
Related
Hello,
after a couple of attempts at installing TWRP recovery, some successful, some not, a ROM reinstall and finally this last factory reset, my Huawei P9 phone is stuck at what appears to be boot or restart loop. It is interesting however that I am unable to turn off the phone at all and it's been like this for an hour. At first, TWRP recovery wouldn't boot but the OS would. Then I did factory reset and phone restarted. Since then it won't boot or turn off. When I hold the power button to turn it off, it vibrates once, then vibrates again and then Huawei logo is displayed. After that a message that says "Your device has been unlocked and can't be trusted." & "Your device is booting now..." which is normal since I unlocked my phone bootloader, but the problem is that it is just stuck there.
It stays there forever, screen on, phone on, can't restart because it comes back to the same point, can't turn it off since battery is impossible to take out... Any hope? I bought the phone a couple of days ago and this is really bad... Help!
Edit: In case someone else stumbles upon similar situation - after trying everything possible with these 3 buttons I had available (vol+- and power), I have managed to boot by (I THINK) holding the power button for 10 secs but releasing it really fast after the screen turns off and BEFORE the first vibration happens.
Edit 2: Now I have the same problem again and I can't seem to get the right button "combo" to pass the booting phase like I did some hour ago... Any ideas?
Edit 3: It appears that the ROM I have flashed caused problems with TWRP - after I got an SD card, managed to put stock ROM (http://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818) on it and then did force upgrade, the phone booted successfully.
Step by step:
1) Drained battery to 0% and forced phone to turn off (otherwise it would vibrate twice and get stuck loading TWRP if I tried to turn it off using power button)
2) When I plugged it in and it got some battery power it started, avoided TWRP and regularly booted the OS (which was causing problems with TWRP in my case I think). If you don't have any OS, do not recharge or turn on your phone until you have prepared and put SD card into the phone
3) Downloaded and extracted the dload folder from the P9 stock ROM archive (http://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818) to root directory of SD card
4) Unplugged and turned off the phone using OS Shutdown option
5) Turned it on by holding power, volup and voldown buttons together - "Your device has been unlocked and can't be trusted. Your device is booting now..." message appeared so I thought it was stuck again and was about to hang myself, but then the OS upgrade started (if it doesn't work right away, try restarting the phone with power, volup and voldown buttons held together again)
6) Upgrade was successful but the phone wouldn't boot without complete factory reset, after which it booted normally. Bootloader was relocked, then I updated to the latest stable EMUI (4.1.1) and life returned to normal.
BUMP
I can access Fastboot&Rescue mode and use abd (but phone is not rooted). Other than that I can't get to repeat what I did when I managed to boot the phone previous time this happened some hours ago... Can anyone post all volume+- and power key combinations which I can try?
Any other ideas more than welcome...
Guys can someone help with this. I'm having the same sort of issues. I have flashed an update and now I have lost touch on the screen. I can't even use twrp because the touch is not working.
Please can someone advise.
Sent from my SM-G928F using Tapatalk
Vernicht said:
BUMP
I can access Fastboot&Rescue mode and use abd (but phone is not rooted). Other than that I can't get to repeat what I did when I managed to boot the phone previous time this happened some hours ago... Can anyone post all volume+- and power key combinations which I can try?
Any other ideas more than welcome...
Click to expand...
Click to collapse
After getting an SD card (everything I did so far was using internal storage) and putting stock Huawei P9 ROM on it (Android 6 and EMUI 4), then shutting down (forced by draining battery) and doing force upgrade (vol+ and vol- held after power up) I have managed to (upgrade and) boot my phone and get it back to normal again. If anyone needs more detailed explanation on how I solved this, feel free to ask.
Open bootloader again, i had the same problem few days ago
Yes please vernicht. My touchscreen has stopped responding after flashing an update.app using DC Phoenix.
I really need to get the phone back to normal.
Thanks in advance
Sent from my SM-G928F using Tapatalk
nscxp2005 said:
Yes please vernicht. My touchscreen has stopped responding after flashing an update.app using DC Phoenix.
I really need to get the phone back to normal.
Thanks in advance
Sent from my SM-G928F using Tapatalk
Click to expand...
Click to collapse
Can you boot into OS? Please provide more exact details.
How I got out of the TWRP(?) boot loop: I couldn't take out the battery, but I have managed to drain it to 0% by letting the phone stay on for hours thus eventually shutting itself down. After that I have charged it and then powered it up. It didn't attempt to boot TWRP (no loop) but instead booted back the OS. After that I could regularly restart the phone and do all operations without getting stuck in loop, which allowed me to issue force upgrade command using hardware power up/down buttons.
Nope. I manage to flash it with DC Phoenix fully but it just keeps boot looping and going back to the Huawei logo. Then after that if goes into its recovery menu and the only my to use the menus is with the volume keys.
Sent from my SM-G928F using Tapatalk
nscxp2005 said:
Nope. I manage to flash it with DC Phoenix fully but it just keeps boot looping and going back to the Huawei logo. Then after that if goes into its recovery menu and the only my to use the menus is with the volume keys.
Sent from my SM-G928F using Tapatalk
Click to expand...
Click to collapse
Are you able to put files on your SD card? If yes, you can try putting stock ROM on it and then force force upgrading (hold vol+ and vol- together after power up). It should overwrite everything and boot up.
I have done this but it won't even force flash the stock rom. It gets to 5% and says 'system error'
I followed your suggestion to let the battery drain and then I charged it fully, but when charging it got to 1% and rebooted the phone into eRecovery.
I wish I could get this phone fixed and back to normal.
Sent from my SM-G928F using Tapatalk
nscxp2005 said:
I have done this but it won't even force flash the stock rom. It gets to 5% and says 'system error'
I followed your suggestion to let the battery drain and then I charged it fully, but when charging it got to 1% and rebooted the phone into eRecovery.
I wish I could get this phone fixed and back to normal.
Sent from my SM-G928F using Tapatalk
Click to expand...
Click to collapse
Did you use this stock ROM for P9 (if it's EVA-L09 like mine) or something else?
http://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818
It worked fine with force upgrade for me, while some other ROMs didn't.
Do you have Wipe cache and data/factory reset options available in eRecovery, did you try that?
I'll try that. The only problem I have is my touchscreen won't respond under eRecovery. I have to use the volume and power key to navigate. Any idea what's happened there?
Sent from my SM-G928F using Tapatalk
nscxp2005 said:
I'll try that. The only problem I have is my touchscreen won't respond under eRecovery. I have to use the volume and power key to navigate. Any idea what's happened there?
Sent from my SM-G928F using Tapatalk
Click to expand...
Click to collapse
It will probably return to function after you restore to stock ROM. Until then you can use power button to select items in eRecovery if needed.
Btw I have edited my original first post in this thread with step by step guide on what I did in my case.
Thank you Vernicht for all your help.
I finally manage to get the phone fully working again. I also managed to get it changed from C900 to C432, lock the bootloader and join the beta.
Thank you so much again. It's very much appreciated.
Merry Christmas too
Sent from my SM-G928F using Tapatalk
Hi nscxp2005
how did you manage that?
i have the same Problem.
i have done a "Wipe Cache" and a factory reset.
i have copied the "update.app" from PauloBrien zip on a sd card in a folder named dload.
then i have done a Force flash -> it goes to 5% an says Invalid File.
when i look in the device with DC Phoenix it says it is a EVA-L09C900B136
Why have i done that?
My wive have the EVA-L09C432B136 and i updatet it OTA to Nougat.
i thought i could switch to that version to get the new Nougat but something went wrong......
thanks in advance and sry for my english =)
trx850 said:
Hi nscxp2005
how did you manage that?
i have the same Problem.
i have done a "Wipe Cache" and a factory reset.
i have copied the "update.app" from PauloBrien zip on a sd card in a folder named dload.
then i have done a Force flash -> it goes to 5% an says Invalid File.
when i look in the device with DC Phoenix it says it is a EVA-L09C900B136
Why have i done that?
My wive have the EVA-L09C432B136 and i updatet it OTA to Nougat.
i thought i could switch to that version to get the new Nougat but something went wrong......
thanks in advance and sry for my english =)
Click to expand...
Click to collapse
Did you manage to fix this issue??
---------- Post added at 10:55 PM ---------- Previous post was at 10:52 PM ----------
Hi Guys, hope you can help
I have got an P9 EVA-L09 which I tried to update to B378 but failed and now it stuck in a boot loop and won't recover using the phone.
I have tried to download the update mentioned above and doing a forced recovery on the phone Power + VOL+ + VOL- but no luck, gets 5% and fails.
Would like some help please.
Hello, I have the same problem, I tried to install Lineage 14.1 and it didn't work. Then i tried to go back to EMUI 5.0 and i just all fell apart. No i have no android on my P9 (cos i wiped all data and the system through TWRP 3.1.1.1), and now my touchscreen doesn't work. When i try to force install, it blockes on 5%. Anyone have any idea on how to fix it? Thanks
weineckcobra said:
Hello, I have the same problem, I tried to install Lineage 14.1 and it didn't work. Then i tried to go back to EMUI 5.0 and i just all fell apart. No i have no android on my P9 (cos i wiped all data and the system through TWRP 3.1.1.1), and now my touchscreen doesn't work. When i try to force install, it blockes on 5%. Anyone have any idea on how to fix it? Thanks
Click to expand...
Click to collapse
Inatall System via Srk Tool
Bricked my P9 while trying to remove branding.
Vernicht said:
Hello,
after a couple of attempts at installing TWRP recovery, some successful, some not, a ROM reinstall and finally this last factory reset, my Huawei P9 phone is stuck at what appears to be boot or restart loop. It is interesting however that I am unable to turn off the phone at all and it's been like this for an hour. At first, TWRP recovery wouldn't boot but the OS would. Then I did factory reset and phone restarted. Since then it won't boot or turn off. When I hold the power button to turn it off, it vibrates once, then vibrates again and then Huawei logo is displayed. After that a message that says "Your device has been unlocked and can't be trusted." & "Your device is booting now..." which is normal since I unlocked my phone bootloader, but the problem is that it is just stuck there.
It stays there forever, screen on, phone on, can't restart because it comes back to the same point, can't turn it off since battery is impossible to take out... Any hope? I bought the phone a couple of days ago and this is really bad... Help!
Edit: In case someone else stumbles upon similar situation - after trying everything possible with these 3 buttons I had available (vol+- and power), I have managed to boot by (I THINK) holding the power button for 10 secs but releasing it really fast after the screen turns off and BEFORE the first vibration happens.
Edit 2: Now I have the same problem again and I can't seem to get the right button "combo" to pass the booting phase like I did some hour ago... Any ideas?
Edit 3: It appears that the ROM I have flashed caused problems with TWRP - after I got an SD card, managed to put stock ROM (http://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818) on it and then did force upgrade, the phone booted successfully.
Step by step:
1) Drained battery to 0% and forced phone to turn off (otherwise it would vibrate twice and get stuck loading TWRP if I tried to turn it off using power button)
2) When I plugged it in and it got some battery power it started, avoided TWRP and regularly booted the OS (which was causing problems with TWRP in my case I think). If you don't have any OS, do not recharge or turn on your phone until you have prepared and put SD card into the phone
3) Downloaded and extracted the dload folder from the P9 stock ROM archive (http://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818) to root directory of SD card
4) Unplugged and turned off the phone using OS Shutdown option
5) Turned it on by holding power, volup and voldown buttons together - "Your device has been unlocked and can't be trusted. Your device is booting now..." message appeared so I thought it was stuck again and was about to hang myself, but then the OS upgrade started (if it doesn't work right away, try restarting the phone with power, volup and voldown buttons held together again)
6) Upgrade was successful but the phone wouldn't boot without complete factory reset, after which it booted normally. Bootloader was relocked, then I updated to the latest stable EMUI (4.1.1) and life returned to normal.
Click to expand...
Click to collapse
I have the same issue after flashing the rollback package from the official huawei site. The phone isn't rooted, it just had a branding for some odd reason. So I installed the C432B182 but somehow ended up with a C900B... firmware. So I installed the Rollback package C900B300 using the 3 button method. It said successfull but ever since I've been stuck in the same loop. At the logo. Trying to enter recovery mode (Volume Up + Power) or Force flash any of the firmwares (stock C432.. or rollback C900) doesnt succeed. It wont attempt. Only vibrates as you described and turns the screen off for a second before entering the same loop again.
How did you manage to enter the flash Menu??
Thanks in advance and hope you can help.
SherifSabet said:
I have the same issue after flashing the rollback package from the official huawei site. The phone isn't rooted, it just had a branding for some odd reason. So I installed the C432B182 but somehow ended up with a C900B... firmware. So I installed the Rollback package C900B300 using the 3 button method. It said successfull but ever since I've been stuck in the same loop. At the logo. Trying to enter recovery mode (Volume Up + Power) or Force flash any of the firmwares (stock C432.. or rollback C900) doesnt succeed. It wont attempt. Only vibrates as you described and turns the screen off for a second before entering the same loop again.
How did you manage to enter the flash Menu??
Thanks in advance and hope you can help.
Click to expand...
Click to collapse
Hello!
At me too such problem. When charging to sit at 0% and plug it into the charger, it immediately turns on and goes into the system, then the screen is worth a long logo. I have a phone EVA-L09C627B150.
Help me find my full version! Or I can use this version by reference https://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818
Sorry for my English!
Hello friends,
So I've had the misfortune of bricking my P10 by installing TWRP then doing a huawei firmware update by accident. I presume because I have custom recovery it didnt go through and now I basically have a very expensive TWRP device lol
Phone doesnt boot into system, so it boots into TWRP.
Can't get it into any other mode for some reason (bootloader mode etc.), I really could only get it there from a power-off mode, but it wont stay powered off from TWRP, just reboots itself.
So now it's pretty much always stuck on TWRP. Can anyone help please?
VTR-AL00 model, was on the B141 firmware before update...
Thank you for reading
silencerxo said:
Hello friends,
So I've had the misfortune of bricking my P10 by installing TWRP then doing a huawei firmware update by accident. I presume because I have custom recovery it didnt go through and now I basically have a very expensive TWRP device lol
Phone doesnt boot into system, so it boots into TWRP.
Can't get it into any other mode for some reason (bootloader mode etc.), I really could only get it there from a power-off mode, but it wont stay powered off from TWRP, just reboots itself.
So now it's pretty much always stuck on TWRP. Can anyone help please?
VTR-AL00 model, was on the B141 firmware before update...
Thank you for reading
Click to expand...
Click to collapse
To reboot in bootloader try this :
-Unplugg the phone from the computer
-Power it off
-When powered off, push vol down button and plug the phone to the computer (while holding vol down button)
-It will normally go in bootloader mode.
christrodr said:
To reboot in bootloader try this :
-Unplugg the phone from the computer
-Power it off
-When powered off, push vol down button and plug the phone to the computer (while holding vol down button)
-It will normally go in bootloader mode.
Click to expand...
Click to collapse
Thank you,
I was trying to do it without plugging it in.
I managed to flash a recovery.img and a boot.img extracted from some (older) firmware from some Russian site and it booted like a charm.
Thank you
Hello, my young brother just bootlooped his new phone, he tried to root the device.
He was following this tutorial - https://forum.xda-developers.com/huawei-p9lite/how-to/guide-unlock-bootloader-twrp-root-t3405701
Unlocking bootloader went fine, then installing TWRP went (probably) fine, then the phone needed another factory reset. And since that moment, there is just "Your device has been unlocked..." and we can't do anything. Going to recovery is impossible. The battery is above 50% so waiting for it to go down on its own will take over a week.
We have a backup made with HiSuite.
I'm not really into huawei, so I've not a single clue what to do. Please, help us guys. Thanks in advance.
Search for firmware flashing with dload method.
Sent from my EVA-L09 using Tapatalk
I'm not any good at such things, really. I don't want to brick the phone, that's why i'm asking you for help. And your help didn't enlight anything, really. So sorry for my ignorance, but I would be greatful if you could explain it in easier way. Thanks in advance.
Just HOLD Volume Down & Power Button Together . Realese Power Button & HOLD Volume Down button when Huawei Logo Appear than You reboot to TWRP(If Install)
Just cheack TWRP installed or not
It's not installed. I have no idea how to boot into system, it just loops. I can't even enter fastboot mode.
ethernity7 said:
It's not installed. I have no idea how to boot into system, it just loops. I can't even enter fastboot mode.
Click to expand...
Click to collapse
Turn of your phone than HOLD Volume Down button than connect to usb than yout phone reboot into fastboot
That's what I try to do. Fastboot doesn't load when i hold volume down + power. I can't turn the device off because it just continously starts over and over again. The phone starts normally when battery goes down completely, system loads but then phone goes off due to lack of battery.
ethernity7 said:
That's what I try to do. Fastboot doesn't load when i hold volume down + power. I can't turn the device off because it just continously starts over and over again. The phone starts normally when battery goes down completely, system loads but then phone goes off due to lack of battery.
Click to expand...
Click to collapse
Sent me a massage after you going to Fastboot
I can't enter fastboot, it doesn't start. It just restarts and i see the screen "phone has been unlocked and can't be trusted, phone is booting..." something like that.
you cant enter fastboot, if you have not... do you even know, what you need to do, to enter fastboot? there is more than two thing to do, so, does you realy know what need to do ? call all thngs you need to do, to enter fastboot please.
got similar problems, because i instaled wrong custom recovery.
there are 2 sugestions, got in fastboot, im sure, its working if do it properly and instal proper recovery, for your model. second, use dc phoenis here
ps. why this post are in p9 not p9 lite forum?!
Well, I plug the device to PC using usb cable and when it's bootlooping I hold volume down and power button. That's how i was entering fastboot before. Now it doesn't work.
I've got stock recovery.
hold power button ~30 sec, force restart. even then nothing? well, if fastboot not working, then its gone. Ofcorse, there need to be a way, how you put on board files to work software, but im sure, thease things have only huawei.
The phone is just bootlooping, nothing else. If the battery goes down and i plug it to its charger I'm able to boot normally into the system. But once i try to turn it off it bootloops again.
ethernity7 said:
Well, I plug the device to PC using usb cable and when it's bootlooping I hold volume down and power button. That's how i was entering fastboot before. Now it doesn't work.
I've got stock recovery.
Click to expand...
Click to collapse
Turn of your phone than HOLD VOLUME DOWN & CONNECT TO USB
---------- Post added at 11:03 AM ---------- Previous post was at 11:01 AM ----------
ethernity7 said:
The phone is just bootlooping, nothing else. If the battery goes down and i plug it to its charger I'm able to boot normally into the system. But once i try to turn it off it bootloops again.
Click to expand...
Click to collapse
Sent me friend request on Facebook www.facebook.com/Rakhib.Mistry
I will tell you how to Unbrick. Don't worry i will want money from you
I can't turn it off. It automatically turns itself on and catches bootloop. I just wrote that fastboot doesn't load at all
Hey Guys,
I unlocked my bootloader and installed TWRP in order to try to upgrade to Oreo.
After a while i decided to just stop with it and leave it stock.
I relocked the bootloader, but now it is hangs at 99% factory reset. Rebooting the phone just brings it back to factory reset.
How do i get in to Fastboot mode to unlock the bootloader again and see if it will just boot up?
Tried different key combo's but it only boots in to the factory reset procedure.....
1. Connect the usb cable already with the pc
2. Press and hold vol- and the power button
3. Connect the phone with the pc when the screen turns black
4. Still hold the buttons until you can see the fastboot screen
Striike said:
1. Connect the usb cable already with the pc
2. Press and hold vol- and the power button
3. Connect the phone with the pc when the screen turns black
4. Still hold the buttons until you can see the fastboot screen
Click to expand...
Click to collapse
Thanks! But i already tried that. Does not work. Always goes to Factory Reset.
Will let the battery drain for now and see what it does then.
i think you flashed the oreo compatible twrp on your phone this makes your nougat phone stuck in boot loop. Try to flash the nougat compatible twrp or try the stock recovery.
I had a problem just like this.
All I did was wait for the battery to drain while it was on the reset screen, and on next bootup it didn't didn't go to that screen.
z1rqdym said:
i think you flashed the oreo compatible twrp on your phone this makes your nougat phone stuck in boot loop. Try to flash the nougat compatible twrp or try the stock recovery.
Click to expand...
Click to collapse
I can't flash anything that is the problem. Cannot get it into bootloader or fastboot mode or anything.
Deevun39 said:
I had a problem just like this.
All I did was wait for the battery to drain while it was on the reset screen, and on next bootup it didn't didn't go to that screen.
Click to expand...
Click to collapse
I let it die, and then i plug in the charger and it boots. I see the initial setup screen but it then reboots again and goes to the Factory Reset loop again.
Guess i will keep trying
Ok i got a bit further.
When i let it die, and then plug it in it boots to android. But as soon as i reboot it, it will go back in to the Factory Rset procedure.
Also adb reboot bootloader does not send it to bootloader so i can unlock the bootloader.
I also tried putting firmware (UPDATE.APP) on an external SD card, but it will not do anything with that either.
Anyone any other suggestion?? Need to either unlock the bootloader, or somehow flash original firmware/recovery.
Audioffensive said:
Ok i got a bit further.
When i let it die, and then plug it in it boots to android. But as soon as i reboot it, it will go back in to the Factory Rset procedure.
Also adb reboot bootloader does not send it to bootloader so i can unlock the bootloader.
I also tried putting firmware (UPDATE.APP) on an external SD card, but it will not do anything with that either.
Anyone any other suggestion?? Need to either unlock the bootloader, or somehow flash original firmware/recovery.
Click to expand...
Click to collapse
can u boot to fastboot?is frp lock?
player98343 said:
can u boot to fastboot?is frp lock?
Click to expand...
Click to collapse
No unfortunately not. When it is booted after draining it, i can do adb reboot bootloader but it just does not go to bootloader. Just reboots back in to factory reset loop.
Audioffensive said:
No unfortunately not. When it is booted after draining it, i can do adb reboot bootloader but it just does not go to bootloader. Just reboots back in to factory reset loop.
Click to expand...
Click to collapse
how about plug your phone to pc/laptop then power button+volme down?
player98343 said:
how about plug your phone to pc/laptop then power button+volme down?
Click to expand...
Click to collapse
Had no succes with that either.....
Unlocking bootloader can only be done from bootloader itseld right??
Audioffensive said:
Had no succes with that either.....
Unlocking bootloader can only be done from bootloader itseld right??
Click to expand...
Click to collapse
i think you already need to send it to huawei service center since you cant boot to fastboot.
I really hoped there was something i could do since it does bootup after draining the battery.
Somehow the factory reset procedure should be stopped so that it boots up after a reboot. There must be some virtual switch to set or something. Problem is i only have adb to do something.
I managed to fix the issue with a tip from another thread.
After draining it again i let it boot again. Then i did a factory reset from the settings menu.
The phone then rebooted and did a lowlevel factory reset. That also was stuck on 99%.
I then rebooted the phone by long pressing the on/off button. The phone then restarted the lowlevel factory reset and that succeeded.
Now its working normally again
Audioffensive said:
I managed to fix the issue with a tip from another thread.
After draining it again i let it boot again. Then i did a factory reset from the settings menu.
The phone then rebooted and did a lowlevel factory reset. That also was stuck on 99%.
I then rebooted the phone by long pressing the on/off button. The phone then restarted the lowlevel factory reset and that succeeded.
Now its working normally again
Click to expand...
Click to collapse
Hello, I don't understand how you arrived to the menu to select factory reset. For me even if draining battery, it continues to loop in factory reset and stuck 99%. . can you explain the procedure step by step. thank you !
mar72kuss said:
Hello, I don't understand how you arrived to the menu to select factory reset. For me even if draining battery, it continues to loop in factory reset and stuck 99%. . can you explain the procedure step by step. thank you !
Click to expand...
Click to collapse
If after draining it still does not boot normally then this does not work for you unfortunately.
Audioffensive said:
Hey Guys,
I unlocked my bootloader and installed TWRP in order to try to upgrade to Oreo.
After a while i decided to just stop with it and leave it stock.
I relocked the bootloader, but now it is hangs at 99% factory reset. Rebooting the phone just brings it back to factory reset.
How do i get in to Fastboot mode to unlock the bootloader again and see if it will just boot up?
Tried different key combo's but it only boots in to the factory reset procedure.....
Click to expand...
Click to collapse
try to use this service firmware it will update your phone into B364
- put the dload folder into the root of a fat32 formatted SD_Card
- shutdown the phone
- While pressing vol_up + vol_down press power_on button the upgrade will be lunched automatically
if the file does not work please provide us with the exact phone model to get the correct file
RAR1991 said:
try to use this service firmware it will update your phone into B364
- put the dload folder into the root of a fat32 formatted SD_Card
- shutdown the phone
- While pressing vol_up + vol_down press power_on button the upgrade will be lunched automatically
if the file does not work please provide us with the exact phone model to get the correct file
Click to expand...
Click to collapse
Ehhhhmmmm...... I solved this already
I wrote that in a post too......
where is the solution to this problem
I have the same problem, what did you do to solve it?
I can't access twrp neither can I am able to give commands or go to bootloader anything I do just again starts the boot process it boots till I see honor logo and repeats the process again.. I an able to charge the phone...
aptop6 said:
I can't access twrp neither can I am able to give commands or go to bootloader anything I do just again starts the boot process it boots till I see honor logo and repeats the process again.. I an able to charge the phone...
Click to expand...
Click to collapse
Connect phone to pc with usb and then try to boot to bootloader(this has always worked for me when I have had that kind of issue). What were you trying to do when this started?
keikari said:
Connect phone to pc with usb and then try to boot to bootloader(this has always worked for me when I have had that kind of issue). What were you trying to do when this started?
Click to expand...
Click to collapse
yeah i tried the thing but still no response , the phone keeps on booting with honor logo,neither the pc can detect any device. I was trying to install twrp recovery and this happend, any help?
lost_gamer9 said:
yeah i tried the thing but still no response , the phone keeps on booting with honor logo,neither the pc can detect any device. I was trying to install twrp recovery and this happend, any help?
Click to expand...
Click to collapse
There's a change that you installed wrong TWRP and it keeps trying to boot recovery until it does it successfully. Though can't be sure since Honor 4x doesn't give any additional info. I can't remember how to fix it, but you could try to do force update, without update file.
Make sure you don't have 'dload' folder in root of your SDcard and that your device has high battery. Then hold vol + and vol - while powering device and keep holding them until it gets to update screen or until it boot loops again. If it gets to update screen your device should boot next time normally.