Database Develop

Can anyone guide me on how to go back from a custom rom to emui stock rom on Che1-lo4

I did not find answer anywhere

You can get back to stock emui by
using inbuilt honor 4x updater
download latest update zip file from official honor site for your device Che1-L04 extract the zip.
then follow the steps similar to force update procedure mentioned in the manuals provided by honor
which are :-
Step 1. Format the Micro SD card (This operation is optional).
Step 2. Copy the entire dload folder (with UPDATE.APP in it) to the root directory of the Micro SD card.
Step 3. Make sure your handset is power off. Insert the Micro SD card into the handset. Press the VOLUME UP and VOLUME DOWN key, and then press the POWER key to power on the phone and enter the Software Upgrade Mode.
Step 4. When the progress bar stop, the phone will restart automatically.

Pepe the Frog said:
You can get back to stock emui by
using inbuilt honor 4x updater
download latest update zip file from official honor site for your device Che1-L04 extract the zip.
then follow the steps similar to force update procedure mentioned in the manuals provided by honor
which are :-
Step 1. Format the Micro SD card (This operation is optional).
Step 2. Copy the entire dload folder (with UPDATE.APP in it) to the root directory of the Micro SD card.
Step 3. Make sure your handset is power off. Insert the Micro SD card into the handset. Press the VOLUME UP and VOLUME DOWN key, and then press the POWER key to power on the phone and enter the Software Upgrade Mode.
Step 4. When the progress bar stop, the phone will restart automatically.
Click to expand...
Click to collapse
This method probably will not work because in order to get custom ROM working, you must have already replaced stock recovery with TWRP or CWM...
---------- Post added at 03:04 PM ---------- Previous post was at 03:02 PM ----------
itsmejerrin said:
I did not find answer anywhere
Click to expand...
Click to collapse
Download official EMUI ROM zip and follow this post:
http://forum.xda-developers.com/showpost.php?p=68695798&postcount=2

Pepe the Frog said:
You can get back to stock emui by
using inbuilt honor 4x updater
download latest update zip file from official honor site for your device Che1-L04 extract the zip.
then follow the steps similar to force update procedure mentioned in the manuals provided by honor
which are :-
Step 1. Format the Micro SD card (This operation is optional).
Step 2. Copy the entire dload folder (with UPDATE.APP in it) to the root directory of the Micro SD card.
Step 3. Make sure your handset is power off. Insert the Micro SD card into the handset. Press the VOLUME UP and VOLUME DOWN key, and then press the POWER key to power on the phone and enter the Software Upgrade Mode.
Step 4. When the progress bar stop, the phone will restart automatically.
Click to expand...
Click to collapse
this worked for me for my che1-l04 i had twrp recovery and was running cyanogen mod 13 on the phone
i am not saying it will work 100% but its worth a shot

Bricked p10, need help.

So I have a p10, and decided to see what i could do with it. Having little experience, I managed to get somewhere. Unlocked the bootloader, got twrp, installed it with the command fastboot flash recovery recovery.img and got:
target reported max download size of 471859200 bytes
sending 'recovery' (32034 KB)...
OKAY [ 1.012s]
writing 'recovery'...
OKAY [ 0.200s]
finished. total time: 1.222s
WOOT! Awesome! No problems! Then I issued: fastboot boot recovery.img
And got
downloading 'boot.img'...
OKAY [ 1.020s]
booting...
FAILED (remote: Command not allowed)
finished. total time: 1.030s
WTF?!
So after a bit, I misread and flashed boot.img with: fastboot flash boot boot.img
I guess I flashed the wrong image. I dunno. But now it boots into the screen that tells me "Your device is unlocked and can'r be trusted" tells me its booting, reboots, goes to the same screen again, says its rebooting again, then brings me to Huawei eRecovery. I connect to my wifi network, telling it to download the latest version and recover, and it says "getting package info failed" So I ma stuck with a device that won't boot.
Oh yes, and down volume and power don't bring me to fastboot anymore.
Begging for help here please.

Do the whole rebranding to unbrick, not sure if you flashed wrong image on boot.
Advice: When flashing recovery boot it by powering off and using key combo. Or adb command. Not from fastboot as IMG.

I did a google search on rebranding to unbrick, and found a guide on the 9. So I assume its similar. It first tests me to boot into twrp. I can't. Twrp never got installed. The next step is to get the offical firmware and put it on the SD card. I can't find it. I am in Canada, and can't find any firmware for canada, nevermind anything north american. It is however possible I have found the wrong guide, as I don't really know what I am doing. As a complete noob, links to guides would be nice when possible and available when making recommendations.

The guide is the same for Mate 9/pro and P10/plus
Original: https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
Explained as easy as posible:
Unlock bootloader (check again that boot loader is unlocked)
Download Update ZIP. I suggest rebrand to VTR-L29 C432 !
A. Get ROM update link through hwmt.ru. Click "filelist.xml". ---> http://hwmt.ru/hwmtsite/firmware-database/?firmware_model=VTR-L29&firmware_page=0
B. Observe "update.zip" size, choose more than 1GB file size FULL OTA . Example VTR-L29C432B164 filelist Link, all three update files and path are in the filelist.xml content.
update.zip: Change URL last "filelist.xml" to "update.zip" download file.
update_data_public.zip: Change URL last "filelist.xml" to "public/update_data_full_public.zip" download file, and rename it to "update_data_public.zip"
update_all_hw.zip: Change URL last "filelist.xml" to "hw/spcseas/update_full_hw_spcseas.zip" download file, and rename it to "update_all_hw.zip" Where spcseas is the model of the file you are downoloading.
Update Package (Download these at original post)
Base: HWOTA_2017050101_Base.zip
OS: Windows -> HWOTA_2017050101_Windows.zip
Model: P10 -> HWOTA_2017050201_VTR.zip [Thanks to @crucky verify]
Put HWOTA on pc desktop and on your external SD card (if you have one, otherwise update process will took a couple of minutes more)
Those 3 downloaded files goes on UPDATE dir, inside HWOTA
Run batch file "update.bat" for same model update or rebrand with/without sdcard.
Select rebrand chose what model is desired (Must be the same as the update package)
Always check the process continues (Sometimes it stucks on twrp or need reconnect to PC)
Once finished Factory default reset will start
Do the process twice! select "Same model update" on the second time.
After update successfully, device might be locked again.

smariob said:
The guide is the same for Mate 9/pro and P10/plus
Original: https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
Explained as easy as posible:
Unlock bootloader (check again that boot loader is unlocked)
Download Update ZIP. I suggest rebrand to VTR-L29 C432 !
A. Get ROM update link through hwmt.ru. Click "filelist.xml". ---> http://hwmt.ru/hwmtsite/firmware-database/?firmware_model=VTR-L29&firmware_page=0
B. Observe "update.zip" size, choose more than 1GB file size FULL OTA . Example VTR-L29C432B164 filelist Link, all three update files and path are in the filelist.xml content.
update.zip: Change URL last "filelist.xml" to "update.zip" download file.
update_data_public.zip: Change URL last "filelist.xml" to "public/update_data_full_public.zip" download file, and rename it to "update_data_public.zip"
update_all_hw.zip: Change URL last "filelist.xml" to "hw/spcseas/update_full_hw_spcseas.zip" download file, and rename it to "update_all_hw.zip" Where spcseas is the model of the file you are downoloading.
Update Package (Download these at original post)
Base: HWOTA_2017050101_Base.zip
OS: Windows -> HWOTA_2017050101_Windows.zip
Model: P10 -> HWOTA_2017050201_VTR.zip [Thanks to @crucky verify]
Put HWOTA on pc desktop and on your external SD card (if you have one, otherwise update process will took a couple of minutes more)
Those 3 downloaded files goes on UPDATE dir, inside HWOTA
Run batch file "update.bat" for same model update or rebrand with/without sdcard.
Select rebrand chose what model is desired (Must be the same as the update package)
Always check the process continues (Sometimes it stucks on twrp or need reconnect to PC)
Once finished Factory default reset will start
Do the process twice! select "Same model update" on the second time.
After update successfully, device might be locked again.
Click to expand...
Click to collapse
okay, i know you are trying to be helpful, but I just can't follow it...
You said "Download Update ZIP. I suggest rebrand to VTR-L29 C432 !" Which one of them? Is the B just a build number, and I should get the latest? please remember, you are talking to a noob.
You talk about 3 files, update.zip, update_data_public.zip and update_all_hw.zip Do I need them all? If so the last one, where I change filelist.xml to all /cn/update_full_all_cn.zip doesn't work. See the following link http://update.hicloud.com:8180/TDS/.../v92067/f2/full/all/cn/update_full_all_cn.zip
Also, rename the file, "Where spcseas is the model of the file you are downoloading" Huh? I know I have to replace the word spcseas with something, but with that?
Now it says to run update.bat Whats the point? I have not been directed to plug the phone into the computer, and even if I did, the computer won't recognize it because I can't get it into any mode... Where do I put these files? They all go in the same directory? I just can't follow this guide as much as I try..
THERE IS GOOD NEWS HOWEVER!
I have been able to get it into TWRP! This means I can get into fastboot, which means I can re-flash the correct boot.img, IF I can get my hands on it (and assuming that's the actual issue It likely is. It was working until I flashed this other boot.img file.). So if I can get direction on how to get it, I should be okay. Double triple and quadruple bonus points for just providing me a direct link to the boot.img file to use without having to play around trying to follow guides I can't seem to understand.
UPDATE!!
Now although I can get into TWRP, its hit and miss, but I can get there eventually, it will no longer boot into fastboot/recovery. When I click reboot, and choose bootloader in TWRP, it just freezes..
This is getting frustrating. Apparently getting into the bootloader is hit and miss, but i can do it.

Search for Huawei update extractor in order to get BOOT.IMG from update.app (inside update zip) I could upload one myself, but I'm not at home right now.
TWRP doesn't support reboot atm. You must power off completly. To boot to recovery press power on and vol + until huawei logo appears, then relase power. It should boot to recovery TWRP in this case.
For boot bootloader you press vol - when you are connecting usb cable to PC.

smariob said:
The guide is the same for Mate 9/pro and P10/plus
Original: https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
Explained as easy as posible:
Unlock bootloader (check again that boot loader is unlocked)
Download Update ZIP. I suggest rebrand to VTR-L29 C432 !
A. Get ROM update link through hwmt.ru. Click "filelist.xml". ---> http://hwmt.ru/hwmtsite/firmware-database/?firmware_model=VTR-L29&firmware_page=0
B. Observe "update.zip" size, choose more than 1GB file size FULL OTA . Example VTR-L29C432B164 filelist Link, all three update files and path are in the filelist.xml content.
update.zip: Change URL last "filelist.xml" to "update.zip" download file.
update_data_public.zip: Change URL last "filelist.xml" to "public/update_data_full_public.zip" download file, and rename it to "update_data_public.zip"
update_all_hw.zip: Change URL last "filelist.xml" to "hw/spcseas/update_full_hw_spcseas.zip" download file, and rename it to "update_all_hw.zip" Where spcseas is the model of the file you are downoloading.
Update Package (Download these at original post)
Base: HWOTA_2017050101_Base.zip
OS: Windows -> HWOTA_2017050101_Windows.zip
Model: P10 -> HWOTA_2017050201_VTR.zip [Thanks to @crucky verify]
Put HWOTA on pc desktop and on your external SD card (if you have one, otherwise update process will took a couple of minutes more)
Those 3 downloaded files goes on UPDATE dir, inside HWOTA
Run batch file "update.bat" for same model update or rebrand with/without sdcard.
Select rebrand chose what model is desired (Must be the same as the update package)
Always check the process continues (Sometimes it stucks on twrp or need reconnect to PC)
Once finished Factory default reset will start
Do the process twice! select "Same model update" on the second time.
After update successfully, device might be locked again.
Click to expand...
Click to collapse
smariob said:
Search for Huawei update extractor in order to get BOOT.IMG from update.app (inside update zip) I could upload one myself, but I'm not at home right now.
TWRP doesn't support reboot atm. You must power off completly. To boot to recovery press power on and vol + until huawei logo appears, then relase power. It should boot to recovery TWRP in this case.
For boot bootloader you press vol - when you are connecting usb cable to PC.
Click to expand...
Click to collapse
Thats good to know. I was getting TWRP more often when I did it from off. What was happening was I would holds power and volume up, release power when the logo appeared, and MOST of the time I would boot into TWRP. Sometimes it would just reboot, I would continue to hold up, and it would either reboot, or boot into TWRP. Occasionally I would get the recovery that came with the phone ?!?!
In any event, I managed to get into TWRP, boot into recovery, extract the boot.img, flash it... AND IT WORKED! Phone booted!
So after all this, I backed up EVERYTHING I could using TWRP. The Boot partition, System partition, EVERYTHING! It kept failing on the Data partition, but from my research that wasn't that important anyway. I then installed SuperRoot_noverity_nocrypt.zip, rebooted, installed phh's SuperUser, installed Root Checker, and finally, I have root!!
Thank you so much for the help. About to go "thank clicking" for all the help you provided.

any idea how to flash these files!

hi,
i need some help flashing these to my bricked p8 lite 2017 PRA-LA1 phone! ive got hold of the files for my phone same version as earlier;
update.zip
update_data_full_public.zip
update_full_PRA-L01_hw_meafnaf.zip
update_full_PRA-L21_hw_meafnaf.zip
wbr

ReyTech said:
hi,
i need some help flashing these to my bricked p8 lite 2017 PRA-LA1 phone! ive got hold of the files for my phone same version as earlier;
update.zip
update_data_full_public.zip
update_full_PRA-L01_hw_meafnaf.zip
update_full_PRA-L21_hw_meafnaf.zip
wbr
Click to expand...
Click to collapse
You have PRA-LA1 so L01 and L21 probably will not work, find LA1 first.
Installation Instructions
Take a full backup of your important data before proceeding.
Download “update.zip” and “update_full_PRA-LA1_hw_meafnaf.zip”.
Connect your device to your computer via USB and create a new folder “dload” in the external microSD card or internal memory.
Now unzip the “update.zip” package and copy the extracted UPDATE.APP file to the new dload folder you created in the previous step.
Now with phone off press vol +, vol - and power at same time and release on boot. If the installation succeeds proceed to the next step otherwise try installing this update with TWRP.
Once your phone starts up, replace the UPDATE.APP package from dload folder with UPDATE.APP package extracted from the cust package (“update_full_PRA-LA1_hw_meafnaf.zip”).
Now install this package by repeating steps above.
TWRP Method
This method requires your phone to have a custom recovery like TWRP. Simply download both the packages from above and copy them to your device. Now reboot into TWRP mode, take a full backup, and then install both packages (update.zip first). Reboot your phone normally upon completion.
I hope this helps.
.

[GUIDE] Flash Stock Huawei Firmwares - PRA-LX1

Warning: Use this at your own risk. I’m not responsible for any damages that may happen due to using this guide.
Prerequisites:
Having the bootloader unlocked
Having a custom recovery already installed
Having a working adb/fastboot environment on your PC
Know how to use Huawei Firmware Finder
Having a backup of all your important data (this guide wipe data/factory reset)
Having a MicroSD card
Having the battery fully charged
Download firmware files:
Use Huawei Firmware Finder to download the "FullOTA-MF" firmware files - you will need all 3 zip files:
update.zip
update_data_full_public.zip
update_full_PRA-xxx_hw_eu.zip
Download the no check recovery:
Go to PRA Recoveries and download the no check recovery image appropriate for your current ‎EMUI version
Prepare MicroSD card:
Move all the previously downloaded files to the MicroSD card and rename them according to this:
RecoveryNoCheck.img
update.zip
update_all_hw.zip
update_data_public.zip
Do a factory reset (Optional but recommended):
Remove google account (because frp)
Boot to the stock recovery by running this command: adb reboot recovery
Wipe data/factory reset
Wipe cache partition
Reboot system now
Enter simcard pin and power off the phone by pressing power button and choose power off
Install Firmware:
Insert MicroSD card into the phone and start it into recovery mode by pressing vol up + power key (make sure you have no usb devices connected to your phone)
You should boot into the your custom recovery, now you open a new terminal in your computer and run the following commands:
adb shell
echo --update_package=/sdcard/update.zip > /cache/recovery/command
echo --update_package=/sdcard/update_data_public.zip >> /cache/recovery/command
echo --update_package=/sdcard/update_all_hw.zip >> /cache/recovery/command
After that flash the RecoveryNoCheck.img using your custom recovery
Then go back to your computer terminal and run this command: reboot recovery
Congratulations if everything went good you should have the new firmware installed on your device
Credits:
If this guide was helpful to you please consider to make a donation to Team MT for Huawei Firmware Finder

Finally a complete and well written guide. Will try in a few hours, thanks mate

thank you
Phone is dead

do we always have to flash HuRUpdater.zip to install other firmwares? and is the main use for this, is so that we dont have to flash correct oeminfo to install other firmwares that need rebranding? does it replace eRecovery?
Having a custom recovery (with running oeminfo_nvm_server service) image
Click to expand...
Click to collapse
latest custom recoveries that have the additional options (oeminfo, vendor, cust, etc..) for installation?
Install Firmware:
Insert MicroSD card into the phone and start it into recovery mode by pressing vol up + power key (make sure you have no usb devices connected to your phone)
You should boot into the your custom recovery now you just need to select the HuRUpdater.zip and flash it
After the installation process reboot system and you are done
Congratulations if everything went good you should have the new firmware installed on your device
Click to expand...
Click to collapse
so just place on the same folder and does it scan where the firmware is then auto installs it? Or there will be a prompt screen for options?

It only works with Android 8.0.Oreo
Trying Android 7.0 nougat does not help.
How to use with Android 7.0?
And I still need firmware Android 7.0 that is available.
I Device emui 5.1 android 7.0 huawei nova 2i - RNE-L22C636B142

:laugh::laugh::laugh::laugh:
eifeldragon said:
thank you
Phone is dead
Click to expand...
Click to collapse
hhahahahahahahaahah

[GUIDE] [AiO] [ULTRA NOOB] ULTIMATE GUIDE FOR MAX PRO M1 - BT, CUSTOM ROMS ETC.

* introduction *
Hello,
before you hate me, please let me to say why I wrote this guide- it is for ultra noob guys, beginners or just for organize almost all files for tweaks and fixes for this phone. Because I noticed myself that it was beginning to make a mess with it, so I decited to write this guide which (what I mensioned) contains tweak and fixes to known bugs that are in the software.
Ready? Staddy? GO!
* warning *
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed.
* YOU are choosing to make these modifications, and if you point the
* finger at me for messing up your device, I will laugh at you.
*
*/
I. Bootloader unlocking
We will start our journey in a beautiful world modified by android with unlocking the bootloader.
What is it?
Bootloader is something like BIOS from computers but in the phone. It let you to boot many software, like recovery. We can't boot directly into recovery without unlocked bootloader because phone has got some closed startup procedure (like POST test in computers). To break it, we must unlock bootloader.
So how to do that?
We must:
1. Download RAR file and you'll get 2 folders namely unlock and ASUS_Android_USB_drivers_for_Windows
2. Install the drivers according to your OS and go the unlock folder
3. Reboot your phone to fastboot mode by pressing volume up + power on at the same time.
4. Connect it to pc and open unlock.bat in unlock folder
5. Bootloader successfully unlocked.
II. Install TWRP
After unlocking bootloader, we need some recovery to install custom software on our beast.
To do that:
1. Download this TWRP (F2FS support) and place it into unlock folder
2. Reboot into fastboot
3. Connect the phone into PC
4. In unlock folder, run cmd and type "fastboot devices". You should see some device plugged into your PC.
5. Type "fastboot flash recovery XXX.img" when XXX means the name of recovery.
6. When installing process finish, press volume down + power as long as you doesn't see fastboot warning.
7. Phone will get into TWRP.
To get into TWRP just presss volume down + power until you doesn'ts see fastboot warning.
III. Decrypt enrypted data
1. Download the decrypt.zip and copy to SDcard
2. Flash in recovery
3. Format /data
4. Reboot
IV. Flashing custom ROMs
Now the main aim of customization: CUSTOM ROM <3 It let you to do many modifications like style of font in system, theme, newer version of software and many many more.
Just:
1. Copy all your necessary software into SD card
2. Boot your device into TWRP
3. Go to "install", pick firmware which you need and swipe to flash
4. Repeat step 3 with gapps
5. Reboot to system
When you want to install some kernel or NXP or magisk or something else, don't do that after flashing system. Before, flash firmware, system and gapps, reboot and configure. Then go to TWRP and flash 3rd party mods.
V. Unlocking Camera2API
To get GCAM work property, we need to unlock camera2api. If you don't know what's that, go there -> https://www.thegeeksclub.com/camera-2-api-check-smartphone-support/
1. Power off the phone and enter fastboot mode.
2. Fire up fastboot terminal and connect your phone to the pc, enable USB debugging mode from dev. options too.
3. Run the command: fastboot oem enable_camera_hal3 true
4. Type: fastboot reboot
VI. Magisk
Just to get root permissions. If you don't know what it is, go there -> https://www.xda-developers.com/what-is-magisk/
1. Go to TWRP and flash this file
2. Reboot to system
3. Install .apk
VII. Some other useful files
TWRP: https://drive.google.com/open?id=1dhjV0p00AiZ83eF5iUA6o9fdx6zsQYTF
GAPPS: https://opengapps.org
CUSTOMROMS: https://forum.xda-developers.com/asus-zenfone-max-pro-m1/development
FIRMWARES:
339 https://drive.google.com/open?id=1EIRZ1HrJQaOynq48lfhYWaHd9L0fhPU5
Pie https://drive.google.com/open?id=1xwFFadooMD2DJqI9dClcCuojAFwHfdtV
NXP: https://drive.google.com/open?id=1lfRGXlf3q53kLMZDOvLe4jMr3szQPLQd
MAGISK:
.zip https://drive.google.com/open?id=1HrZUdL7ZgVWfuDg7PWOL_DZrwsmNzrRf
.apk https://drive.google.com/open?id=1jFee8Mx0pwCcyE729h33gyfaIfHxNgVI
GCAMS:
Arnova https://drive.google.com/open?id=1R1Sfw0DdKXZxYWDkEvH8ODpWHkUjnkxk
MGC https://drive.google.com/open?id=1YowAmosszfoCJCORjcwE7OQzxOuqY7ql
If you have any observations, remarks - write to me!
Thanks for all XDA community,
~ALYSKY

Reserved

Sir can you plz tell me does this method works on 6gb varient? With firmware version .340
Is this method for XOOT or XOOTD?
My model is XOOTD ....

Dewashish03 said:
Sir can you plz tell me does this method works on 6gb varient? With firmware version .340
Is this method for XOOT or XOOTD?
My model is XOOTD ....
Click to expand...
Click to collapse
I tested it on 4/64 X00TD variant and it worked.

ALYSKY said:
I tested it on 4/64 X00TD variant and it worked.
Click to expand...
Click to collapse
Thax for replay...
Does this twrp can be flashed successful on .340 and pie?
Do we need different versions of twrp to flash on different android version like .239 .240 and pie?

Dewashish03 said:
Thax for replay...
Does this twrp can be flashed successful on .340 and pie?
Do we need different versions of twrp to flash on different android version like .239 .240 and pie?
Click to expand...
Click to collapse
It doesn't matter. You can use the same version of TWRP on different version of firmware.

can this method work on X00TD android pie stock rom. @ALYSKY

unable to install twrp, the drivers are well installed, the bootloader is to unlock I use the original cable usb, I try on several usb port, always the same error message
failed remote requested download size is more than max allowed
my model X00TD
please help me

I have installed twrp recovery and can boot into it but i cant find the magisk or decrypt files to swipe in the recovery. please help

noob858 said:
I have installed twrp recovery and can boot into it but i cant find the magisk or decrypt files to swipe in the recovery. please help
Click to expand...
Click to collapse
U need to put them in your sd card and then you have to select storage (external) and then flash them

lokesh773 said:
U need to put them in your sd card and then you have to select storage (external) and then flash them
Click to expand...
Click to collapse
ok im supernoob at this. nut how do i put it to sd card?? i mean i dont have any sd card inserted.

noob858 said:
ok im supernoob at this. nut how do i put it to sd card?? i mean i dont have any sd card inserted.
Click to expand...
Click to collapse
Use pc to transfer it to sd card....if you dont have sd card you can use pendrive...

Every NKOTB is desperate to post his/her/it's thread / YouTube video for such guide/s, quoting stuff from other's posts / threads and sharing their hard work, without the basic decency to quote and credit the original thread / guy who posted in the first place. Please do so or this thread will be reported for plagiarism.

angixspirit said:
unable to install twrp, the drivers are well installed, the bootloader is to unlock I use the original cable usb, I try on several usb port, always the same error message
failed remote requested download size is more than max allowed
my model X00TD
please help me
Click to expand...
Click to collapse
have you tried to install the driver?

I've updated my phone to latest official pie (.053) . Does these steps still applicable or there is any changes? Please kindly update the guide if there is any changes.

guys i tried to flash recovery but after that.. it does nothing.. i just got blank screen. No TWRP screen
Update 1 : Without TWRP I was able to install Magisk via Manager but after flashing patched image file. I now no longer able to start mobile.. it always gets to recovery screen. somebudy help
Update 2 : I used another boot image and patched it with Magisk and now I am able to boot phone but now it stuck on logo screen
Update 3 : I was using totally differnt boot image .. I extracted it from offical stock rom. Now I booted my phone also did root. Now question is how to install TWRP and dyscript.zip
Update 4 : TWRP or RWRP not working so Now I am not able to decrypt my phone. Help

hi why theres a password in twrp?

ALYSKY said:
* introduction *
1. Download RAR file and you'll get 2 folders namely unlock and ASUS_Android_USB_drivers_for_Windows
2. Install the drivers according to your OS and go the unlock folder
3. Reboot your phone to fastboot mode by pressing volume up + power on at the same time.
4. Connect it to pc and open unlock.bat in unlock folder
5. Bootloader successfully unlocked.
Click to expand...
Click to collapse
Hi,
First of all, thank you for the detailed steps and instructions.
I downloaded the RAR mentioned in the step 1 above. When I click open after downloading, there's an error preventing me to open. I also tried extracting but I'm unable to do so.
Please provide me the updated link or reupload the file so that I can download it,
Thanks.

unlock.bat file is missing is the unlock folder...what to do?

this is showing when trying to istall twrp
what to do?
 @ALYSKY