Has anyone found a way to debrand the device flashing an unlocked firmware?
Yep. Comsy Odin and the Canadian XAC firmware from updato.com. The information is in the R&D thread in the main Galaxy S8 forum but it's not the instructions at the beginning. You'll have to read through the thread to find what I'm talking about. I used it and I now have no Verizon or carrier branding at all and I have the Samsung boot screen. The only things preinsatlled are Micrsoft Office apps. I flashed my buddies phone too and he swears he gets better LTE coverage on straight talk. He says he has 5 bars at his house where he only had one before. This would suggest that either the radio is better or the XAC firmware unlocked another band. PLUS most if not all of the bugs from the Verizon software are gone. I highly recommend doing this. I flashed everything but the BL failed. My phone booted after quite a while and then I did a factory reset. You should remove any locks or pin before you flash it. Good luck!
---------- Post added at 04:40 PM ---------- Previous post was at 04:35 PM ----------
forum.xda-developers.com/galaxy-s8/how-to/rd-carrier-switch-root-snapdragon-t3597473
i did the procedure but now the phone doesnt work, i have signal, but if i try to place a call i get "not registered on network"
underground9 said:
i did the procedure but now the phone doesnt work, i have signal, but if i try to place a call i get "not registered on network"
Click to expand...
Click to collapse
What network ar you on? You may need to add the APN as they are all gone when you flash this firmware. You can always download the original firmware and flash back. You may get more useful info posting in the other thread as I seem to be the only one responding here.
it fixed itself, i waited a bit and got the network...weird
Awesome. Glad it worked out.
i wish it was possible to do it with an american rom so that all the samsung apps were not in the canadian version
I could not flash the XAC firmware. Tried the newest Odin as well. What exactly did you flash? Just the AP and the CSC? What firmware were you on before flashing the XAC firmware?
did you try prince odin?
Yeah it turned I had to use another computer to flash it. However, now I can't flash back to Verizon to get the XAA/XAA/VZW that Verizon folks are getting. My Samsung Pay doesn't work but android pay does lol
so now with the "usa" firmware out why is this forum dead i wanna flash my s8+ with the usa unlocked firmware but have never done it before so i am looking for a dcent guid all the guids i can find are all about atand t phones does it not matter?
cale vance said:
so now with the "usa" firmware out why is this forum dead i wanna flash my s8+ with the usa unlocked firmware but have never done it before so i am looking for a dcent guid all the guids i can find are all about atand t phones does it not matter?
Click to expand...
Click to collapse
See this thread. It is on the T Mobile Forum, but is good for all of the US phones.
https://forum.xda-developers.com/tmobile-galaxy-s8/how-to/eng-boot-root-t3608353
So is the unlocked firmware working on Verizon phones? You get a better deal if you go with the Verizon carrier ($100 gift card, wireless charger)over the unlocked at best buy . Also unlocked version not working with gear VR?
The U1 firmware does work on Verizon phones. I'm using it now but if you "convert" it, you lose some functionality like gear VR. If you went with a proper unlocked s8 then gear vr will work. Someone said their converted Vzw S8 works with gear vr but didn't work for me and others.
gqukyo said:
The U1 firmware does work on Verizon phones. I'm using it now but if you "convert" it, you lose some functionality like gear VR. If you went with a proper unlocked s8 then gear vr will work. Someone said their converted Vzw S8 works with gear vr but didn't work for me and others.
Click to expand...
Click to collapse
Is there a easy way to just flash the u1 firmware
just flash via Odin. It's that simple because it's basically the same hardware. Flashed quite a few times so dunno if you need a modified version of Odin but any recent Odin version should work.
Thanks flashed via Odin now have G955U1
does video calling work on unlocked firmware?
gqukyo said:
The U1 firmware does work on Verizon phones. I'm using it now but if you "convert" it, you lose some functionality like gear VR. If you went with a proper unlocked s8 then gear vr will work. Someone said their converted Vzw S8 works with gear vr but didn't work for me and others.
Click to expand...
Click to collapse
GearVR is working now. It was a Samsung issue server-side. It wasn't even working on legit US Unlocked models.
hands0m3 said:
Is there a easy way to just flash the u1 firmware
Click to expand...
Click to collapse
Just flash the files in Odin.
Related
I'm sure I'm not the only one who ordered the S9 from Samsung direct with the intentions of flashing it to the carriers firmware. I checked on updato and don't see it there, does anyone else know where to get the firmware? I want to use it on Sprint so I believe the CSS is SPR for Sprint.
https://www.sammobile.com/firmwares/SM-G960F/ here you go
for now there is only 1 german firmware available for download
And in case you find SamMobile too slow, I've uploaded the S9 firmware update (DBT) to AFH for having a mirror HERE
Thanks, I am in need of the US version for Sprint which the CSS I believe is SPR. I'll keep checking updato I know sammobile is super slow but if it's there and I start it now it may be done by the time I get my phone tomorrow.
Never done a carrier flash to an unlocked version. Few questions:
1. After flashing do you start getting the carrier OTA updates? And all carrier functions particularly wifi calling, visual voicemail, HD video calling start working?
2. How does the carrier fw dump work? Someone with sprint fw would have to do a carrier dump and uploads it (presumably without tinkering the content)?
3. If the file is tinkered with, since it's a signed file, the checksum would change and it wouldn't let you flash, right?? Sorry for the noob questions, just haven't done carrier flashes.
testinguser said:
Never done a carrier flash to an unlocked version. Few questions:
1. After flashing do you start getting the carrier OTA updates? And all carrier functions particularly wifi calling, visual voicemail, HD video calling start working?
2. How does the carrier fw dump work? Someone with sprint fw would have to do a carrier dump and uploads it (presumably without tinkering the content)?
3. If the file is tinkered with, since it's a signed file, the checksum would change and it wouldn't let you flash, right?? Sorry for the noob questions, just haven't done carrier flashes.
Click to expand...
Click to collapse
That is correct you are flashing the carriers version with their wonderful bloatware on top of it. Unfortunately for now that's the only way to get WiFi calling, VVM, and VoLTE. I just got the unlocked version today and currently downloading the Sprint firmware because without it I don't have those features. Hell LTE doesn't work on the stock version of the firmware.
GrandMstrBud said:
That is correct you are flashing the carriers version with their wonderful bloatware on top of it. Unfortunately for now that's the only way to get WiFi calling, VVM, and VoLTE. I just got the unlocked version today and currently downloading the Sprint firmware because without it I don't have those features. Hell LTE doesn't work on the stock version of the firmware.
Click to expand...
Click to collapse
Depends on the carrier. I know the s8 wifi calling and volte worked on tmobile with the unlocked firmware.
I used the SamFirm application and downloaded the Sprint firmware but yet after flashing it I still have the stock samsung firmware. I don't see any sprint software on it at all nor do I see LTE calling plus or WiFi calling. Plus on the stock firmware it will not give me any LTE data and when looking at the APN there are 2 listed but none are checked and you can't check any. It was like this out of the box before I even attempted to flash the so called Sprint variant version. I spent a good 4 1/2 hours between going to the Sprint store to get a new SIM, to calling in, and the online chat and nobody had a clue it was the same old troubleshooting steps and the best they could do was file a ticket and have someone get back to me between 24 and 48 hours. I went through this same BS when I activated the unlocked S8, the iPhone 8, and when I switched back to the S8, plus when one of our phones broke and had to switch, and now this. They can never get anything activated correctly. At least on the S8 after flashing the Sprint firmware I was able to have all the customization's but I'm not seeing it on here.
My unlocked s9 from samsung.com works on sprint lte just fine....
I do however want to flash the sprint one to get the fake VoLTE and voicemail working.
I have SM-G965U Verizon. So it I flash this will all the Verizon Boatware will be removed? And logo
Why is there NO countries G960FD (for dual SIM) ie the better version of any model?
roosta said:
Why is there NO countries G960FD (for dual SIM) ie the better version of any model?
Click to expand...
Click to collapse
The F firmware always flashes fine on the FD.
Goronok said:
The F firmware always flashes fine on the FD.
Click to expand...
Click to collapse
You are missing the point here. Why would anyone with dual sim phone flash a ROM for single sim?! Makes no sense. Missing functions or features in the rom for the 2nd sim...
roosta said:
You are missing the point here. Why would anyone with dual sim phone flash a ROM for single sim?! Makes no sense. Missing functions or features in the rom for the 2nd sim...
Click to expand...
Click to collapse
Nope, I think you're missing the point
The F rom flashes on the FD and carries all dual sim capabilities.
Goronok said:
Nope, I think you're missing the point
The F rom flashes on the FD and carries all dual sim capabilities.
Click to expand...
Click to collapse
Have you done this to verify?
roosta said:
Have you done this to verify?
Click to expand...
Click to collapse
Many times.
My wife had a dual sim s8 and hated the dual sim features - found them annoying as she only uses one sim. I legitimately could not find a way to disable them. I flashed every rom I could find and dual sim features always carried over.
Goronok said:
Many times.
My wife had a dual sim s8 and hated the dual sim features - found them annoying as she only uses one sim. I legitimately could not find a way to disable them. I flashed every rom I could find and dual sim features always carried over.
Click to expand...
Click to collapse
Can you confirm if the root is hustle firmware\OS based or system based? I don't like the idea of having to flash updates every couple of months and then re rooting the device or in my current case, I need to re unlock the boot loader and re root the phone if I update the firnware...which is bloody stupid. Proper root should be regardless the firmware.
Dpo you think we will get there with the s9? Xposed framework installed and running smoothly on Oreo?
Hi guys first sorry for my bad english
I try flash my sm-g960f after stop working and stuck at logo samsung.
how can i find combination firmware ? i don't have csc and pda number i can't boot to recovery mode i only can boot to download mode.
Details from download mode:
PRODUCT NAME SM-G960F
FRP LOCK ON
OEM LOCK ON
RP SWREV B:2 K:2 S:2
I try last firmware from sammobile etc but always come secure boot fail or block by frp at screen mobile i use last oddin ver.
Please guys Help i try flash with 14 or more diffrent firmware. how can i check correct firmware? Thanks
As per the title, bought an unlocked G970U instead of U1 by mistake. Should I expect a Verizon splash screen greeting me in the bootloader? I don't wanna see any branding anywhere in my phone. Can I get rid of any of that flashing U1 firmware?
redsmith said:
As per the title, bought an unlocked G970U instead of U1 by mistake. Should I expect a Verizon splash screen greeting me in the bootloader? I don't wanna see any branding anywhere in my phone. Can I get rid of any of that flashing U1 firmware?
Click to expand...
Click to collapse
Which G970U phone you have bought. If it was a Verizon branded, then their logo should greet you If you bought T-Mobile variant, then its logo will be present while booting the phone. Flashing is possible and it depends which carrier you have. Also don't you have the phone in hand yet?
Charkatak said:
Which G970U phone you have bought. If it was a Verizon branded, then their logo should greet you If you bought T-Mobile variant, then its logo will be present while booting the phone. Flashing is possible and it depends which carrier you have. Also don't you have the phone in hand yet?
Click to expand...
Click to collapse
Yeah, the phone hasn't arrived yet. In the pictures I can see the box has no carrier logo, but I'm guessing it's Verizon because I haven't seen a Verizon branded box yet. Also, the box definitely says G970U.
I've been a Nexus/Pixel user all my flashing life, so I'm well versed in the fastboot/adb dark arts. How does this compare to Odin? There are so many new terms that I'm still trying to understand: CSC, HOME CSC, USERDATA, etc. Is there any guide I can follow to flash my incoming phone to U1 firmware?
redsmith said:
Yeah, the phone hasn't arrived yet. In the pictures I can see the box has no carrier logo, but I'm guessing it's Verizon because I haven't seen a Verizon branded box yet. Also, the box definitely says G970U.
I've been a Nexus/Pixel user all my flashing life, so I'm well versed in the fastboot/adb dark arts. How does this compare to Odin? There are so many new terms that I'm still trying to understand: CSC, HOME CSC, USERDATA, etc. Is there any guide I can follow to flash my incoming phone to U1 firmware?
Click to expand...
Click to collapse
The T-Mobile version is also G970U, so it can be pretty much any carrier. USERDATA file is present in carrier firmware, if you flash unlocked firmware you won't need/have this file.
Link below is for S8, but works for S10 as well. Of course you would need to use firmware files for your phone. I would also use instructions under "Flashing standard firmware" first using Standard Odin. If you get an error when staring to flash, then use (Patched) Prince Comsy's Odin.
https://forum.xda-developers.com/galaxy-s8/how-to/snap-guide-flashing-standard-fw-carrier-t3625817
Charkatak said:
The T-Mobile version is also G970U, so it can be pretty much any carrier. USERDATA file is present in carrier firmware, if you flash unlocked firmware you won't need/have this file.
Link below is for S8, but works for S10 as well. Of course you would need to use firmware files for your phone. I would also use instructions under "Flashing standard firmware" first using Standard Odin. If you get an error when staring to flash, then use (Patched) Prince Comsy's Odin.
https://forum.xda-developers.com/gal...rrier-t3625817
Click to expand...
Click to collapse
Thanks a lot. One last question. I'm based in Mexico (we only get Exynos here), so I got a U version to get the Snapdragon CPU. Obviously I don't want any US carrier branding/blotware in the phone since I couldn't benefit whatsoever from it. What about OTA's, though? Will I get them whenever Samsung releases an update for U1? Or will that depend on my carrier? Should I update monthly using Odin? Do I have to factory reset? So many questions :silly:
The link you provided doesn't work, btw. But I've since found some other Odin guides. Thanks!
redsmith said:
Thanks a lot. One last question. I'm based in Mexico (we only get Exynos here), so I got a U version to get the Snapdragon CPU. Obviously I don't want any US carrier branding/blotware in the phone since I couldn't benefit whatsoever from it. What about OTA's, though? Will I get them whenever Samsung releases an update for U1? Or will that depend on my carrier? Should I update monthly using Odin? Do I have to factory reset? So many questions :silly:
The link you provided doesn't work, btw. But I've since found some other Odin guides. Thanks!
Click to expand...
Click to collapse
I corrected the link in case you need it.
To answer OTA question: I had unlocked U1 model of S8 and when I flashed it with T-Mobile firmware then my phone got OTA from T-Mobile when they release it. I assume if you have carrier branded phone and flash it with U1(XAA) firmware then most likely your phone will get updates when Samsung releases them. You won't have to use Odin every time there is an update if you flash properly. Also, it would be advisable to flash using CSC file instead of HOME CSC, so your phone would be wiped. It is because you change firmware and want your software to be fully compatible. After flashing and you check your phone's software update and see that is shows "not compatible or something similar", then I would just suggest you to do "reset"(factory reset) from setting and after you setup your phone, that message will disappear. Also don't do any software update before flashing as you phone may get a fresher firmware than the one you might be trying to flash.
1) Check your current phone firmware
2) Download firmware you want, but if you can, get the firmware that is a previous one than the current one, so you will check to see how your phone gets OTAs
3) Flash using Odin
4) After that disconnect and let the phone do its thing
5) Set it up and check to see if software update section in settings don't give you any messages such as the one I outlined above, if it does, just factory reset the phone
I've seen a couple of threads about this here, but I'm confused about where I can get the firmware to flash an unlocked S10 (SM-G973U1) to T-Mobile firmware, and they've not really told me where to download the firmware that I need. One thread pointed at S10+ firmware, not useful to me, and the other didn't give any URL for downloading firmware.
Can anyone help me find the right firmware? I've used Odin before, and am fine with that. I also know that I have to have the right firmware for this to work *smile*.
Also, the firmware to flash back from T-Mobile to unlocked would be very useful, since I may want to change back to unlocked at some point. The reason that I want to flash T-Mobile firmware is since I'm still on the May 1 "monthly" Android security update on my unlocked S10. That doesn't make me happy, more than a quarter behind by this point...very disappointed.
Thanks!
There's a firmware thread here:
https://forum.xda-developers.com/galaxy-s10/how-to/s10e-g973u-g973u1-firmware-links-t3905852
RogerSC said:
I've seen a couple of threads about this here, but I'm confused about where I can get the firmware to flash an unlocked S10 (SM-G973U1) to T-Mobile firmware, and they've not really told me where to download the firmware that I need. One thread pointed at S10+ firmware, not useful to me, and the other didn't give any URL for downloading firmware.
Can anyone help me find the right firmware? I've used Odin before, and am fine with that. I also know that I have to have the right firmware for this to work *smile*.
Also, the firmware to flash back from T-Mobile to unlocked would be very useful, since I may want to change back to unlocked at some point. The reason that I want to flash T-Mobile firmware is since I'm still on the May 1 "monthly" Android security update on my unlocked S10. That doesn't make me happy, more than a quarter behind by this point...very disappointed.
Thanks!
Click to expand...
Click to collapse
If the phone is SIM unlocked, the Firmware you want is the USC or XAA firmware... That way it will switch carriers apps and bloatware when you change sim cards...
Search for samfirm on google....
Have Fun!!
I bought an S10+ from Amazon renewed and they sent me a SM-G975F, which is on Claro mobile. I've never heard of it and I don't even think its from the US, but it works fine. I just wanted to flash the phone to Tmobile or unlocked so it can get updates from Tmobile. I'm completely new to this and I looked up how to do it and got completely lost. I found a guide on how to use Odin and Prince cosmy but it still didn't work. I've been through all the guides I could find but nothing seems to work. Could someone help guide me on how to do it correctly? I'd even be willing to venmo someone $10 if it works.
Well you're in the S10 forum, not the S10+ forum. Anyway, you can't flash G975U firmware (which is t-mobile in this case) to a G975F phone. You might can flash the International Samsung firmware using the patched version of Odin, but I'm not 100% on that.
StoneyJSG said:
Well you're in the S10 forum, not the S10+ forum. Anyway, you can't flash G975U firmware (which is t-mobile in this case) to a G975F phone. You might can flash the International Samsung firmware using the patched version of Odin, but I'm not 100% on that.
Click to expand...
Click to collapse
Oh, my bad, but thank you for the info.
I'm using an unlocked U1 on T-mobile US and just used the google dialer to switch CSC to XAR (Which I don't think you HAVE to do). Just use frija and download SM-F916W region XAC and use Odin patched. Up and running with no issues.
**updated i actually used model SM-F916W region XAC in Frija.
jcrutchvt10 said:
I'm using an unlocked U1 on T-mobile US and just used the google dialer to switch CSC to XAR (Which is in common with the Canadian shared CSC). Just use frija and download SM-F916W region XAR and use Odin patched. Up and running with no issues.
Click to expand...
Click to collapse
did you have to wipe your phone? Same on T-Mobile and getting antsy waiting
Is there any drawbacks whatsoever for changing your CSC?
Or let me rephrase, do you still have 5G, Wifi Calling, samsung pay, etc.?
curiousmileo said:
did you have to wipe your phone? Same on T-Mobile and getting antsy waiting
Click to expand...
Click to collapse
I chose to wipe not sure if you must.
abdielol said:
Is there any drawbacks whatsoever for changing your CSC?
Or let me rephrase, do you still have 5G, Wifi Calling, samsung pay, etc.?
Click to expand...
Click to collapse
No drawback at all. Yes I still have all of the above.
jcrutchvt10 said:
I'm using an unlocked U1 on T-mobile US and just used the google dialer to switch CSC to XAR (Which is in common with the Canadian shared CSC). Just use frija and download SM-F916W region XAR and use Odin patched. Up and running with no issues.
Click to expand...
Click to collapse
Which CSC did you use when searching in Frija? XAR returns no results for the SM-F916W.
XAC?
After looking on Frija I'm seeing XAR is for SM-F916U1 and it's US based Android 10. Not sure how you got Android 11. If you meant XAC there's no option to change the CSC to that.
jcrutchvt10 said:
I'm using an unlocked U1 on T-mobile US and just used the google dialer to switch CSC to XAR (Which is in common with the Canadian shared CSC). Just use frija and download SM-F916W region XAR and use Odin patched. Up and running with no issues.
Click to expand...
Click to collapse
And then did you switch your CSC back to TMB?
abdielol said:
After looking on Frija I'm seeing XAR is for SM-F916U1 and it's US based Android 10. Not sure how you got Android 11. If you meant XAC there's no option to change the CSC to that.
Click to expand...
Click to collapse
GaresTaylan said:
Which CSC did you use when searching in Frija? XAR returns no results for the SM-F916W.
XAC?
Click to expand...
Click to collapse
My apologies i was running on very little sleep. I did indeed use XAC in Frija. So I suppose you could try leaving it on TMB and flashing since i flashed the XAC version for SM-F916W over XAR on my U1. I do have a bunch of extra dev options though that i'm not sure would be exactly the same. I will confirm later but so far, I haven't found a dialer code on XAR that works to change CSC on version CTLL with XAC. But your sim will automatically flip your network CSC to TMB regardless. I'll update my previous posts thanks for the catch.
anuraj1 said:
And then did you switch your CSC back to TMB?
Click to expand...
Click to collapse
Like i mentioned in my post above, so far, I haven't found a dialer code that opens up the CSC menu on the new version. I'm going to try again shortly but your sim will automatically set your network to TMB. I can say that VOLTE and WFC works much more efficiently for me on the new version. You just have to wait for setup to complete and the WFC option will appear as usual.
ODIN allowed you to flash SM-F916W firmware on a SM-F916U1 model? Typically cross flashing between models fails when using ODIN and even if it let you, you'd probably be soft-bricked.
This does work. I have tried it. My fold 2 was bought from Samsung unlocked. It now shows the device as SM-F916W. I am with AT&T and 5g doesn't show up but everything else seems to run just fine.
I was also able to go back to u1 firmware with CSC XAA .
tlbland0426 said:
ODIN allowed you to flash SM-F916W firmware on a SM-F916U1 model? Typically cross flashing between models fails when using ODIN and even if it let you, you'd probably be soft-bricked.
Click to expand...
Click to collapse
Yeah the patched ODIN 3.1.4 did work in this case. I did some checking of the partitioning among various regions/versions and the canadian version didn't really require any changes so i thought i'd take a chance. I do have 5G so that tells me you need to apply sales/network CSC of something that isn't carrier locked prior to updating and everything should work ok. That's speculation and my personal experience.
Test
aj2019 said:
Hey! So, I have SM-F916U. I flashed SM-F916U1 firmware to get rid of the AT&T Bloatware. Everything is working fine but my Samsung Pay shows USA Offers but I live in India.
Going by the same logic as you mentioned, Can I flash CSC of SM-F916B (India Version) to get Samsung Pay Indian Offers?
Click to expand...
Click to collapse
I'd be hesitant to do anything with a non-unlocked variant.
tlbland0426 said:
ODIN allowed you to flash SM-F916W firmware on a SM-F916U1 model? Typically cross flashing between models fails when using ODIN and even if it let you, you'd probably be soft-bricked.
Click to expand...
Click to collapse
This isn't surprising at all. Since the Galaxy S8 and Note 8, the U models and the W models have all been cross compatible with firmware. They are actually the same exact device, and the W only indicates it's running Canadian firmware. Just like the U1 indicates it's non-carrier branded and U indicates it's a carrier model. No issues cross flashing at all.
aj2019 said:
Hey! So, I have SM-F916U. I flashed SM-F916U1 firmware to get rid of the AT&T Bloatware. Everything is working fine but my Samsung Pay shows USA Offers but I live in India.
Going by the same logic as you mentioned, Can I flash CSC of SM-F916B (India Version) to get Samsung Pay Indian Offers?
Click to expand...
Click to collapse
916B and 916U are not the same devices. There are hardware differences, so you can't crossflash firmware.
jcrutchvt10 said:
I'd be hesitant to do anything with a non-unlocked variant.
Click to expand...
Click to collapse
Flashing firmware doesn't do anything to affect the locked or unlocked status. Many, many people here have flashed U1 firmware on locked U devices over the last few years.
Mr. Orange 645 said:
916B and 916U are not the same devices. There are hardware differences, so you can't crossflash firmware.
Flashing firmware doesn't do anything to affect the locked or unlocked status. Many, many people here have flashed U1 firmware on locked U devices over the last few years.
Click to expand...
Click to collapse
Got it! Thankyou so much! So, is there any possible way to get Samsung Pay India app on my US version of Galaxy Fold 2?
aj2019 said:
Got it! Thankyou so much! So, is there any possible way to get Samsung Pay India app on my US version of Galaxy Fold 2?
Click to expand...
Click to collapse
I honestly have no idea. I'd check some of the other Samsung forums, like the Note 20 or Note 10 forums.you may find an answer there as they are more popular devices.
I actually went and flashed my u1 to this version .. everything else works as it should but so far my only drawback is that my samsung sofi account has been deleted after it updated to samsung pay Canada...
Edit: although it samsung pay Canada all I had to the was verify my samsung password and accept samsung pass terms and I was good to go everything is there and works as it should.