Database Develop

need urgent help ...

Hey.
i just s-off'd my phone, rooted it and all that fun stuff. Now when i tried to flash [ROM][Sept26][INC S]Virtuous Unity 2.39.0 Sense 3.0 Based on Pyramid. everything went well, until the installation was finished. It just stopped on the bootlogo HTC. and nothing. been this for the last 30 minutes or so. what to do ? can i pull the battery and it might boot up correctly?
EDIT:
okey, pulled the battery, managed to backup and restore. question is, will it work if i try again? hahah- im to afraid to try-
Thanks
Robin

Frantiic said:
Hey.
i just s-off'd my phone, rooted it and all that fun stuff. Now when i tried to flash [ROM][Sept26][INC S]Virtuous Unity 2.39.0 Sense 3.0 Based on Pyramid. everything went well, until the installation was finished. It just stopped on the bootlogo HTC. and nothing. been this for the last 30 minutes or so. what to do ? can i pull the battery and it might boot up correctly?
EDIT:
okey, pulled the battery, managed to backup and restore. question is, will it work if i try again? hahah- im to afraid to try-
Thanks
Robin
Click to expand...
Click to collapse
From recovery mode did you wipe data, cache and dalvik cache before you flashed the ROM? Also which recovery did you install after you S-OFF?
Did you see this note on the Original Post of the ROM:
Important Notes
If you are experiencing random freezes and/or reboots, this is likely due to your device being incapable of handling our overclocking defaults. Download and apply this flashable patch, which will reduce the maximum CPU frequency to 1Ghz and likely eliminate this issue.
You must complete a full wipe prior to installing this ROM the first time. We also recommend wiping between upgrades, but you are welcome to try upgrading without a wipe. However, no support will be provided if you file a bug without having wiped prior to submission.
Also, did you follow all of the steps that were listed in the second post?

thanks for the respons.
I used revolutinory.io to do everything.. i did wipe and all that, but still had the problem. i downloaded the patch in the topic, but how do i install it ? transfer it to my sd card and run it from the phone ? and then flash the rom?
thanks
tpbklake said:
From recovery mode did you wipe data, cache and dalvik cache before you flashed the ROM? Also which recovery did you install after you S-OFF?
Did you see this note on the Original Post of the ROM:
Important Notes
If you are experiencing random freezes and/or reboots, this is likely due to your device being incapable of handling our overclocking defaults. Download and apply this flashable patch, which will reduce the maximum CPU frequency to 1Ghz and likely eliminate this issue.
You must complete a full wipe prior to installing this ROM the first time. We also recommend wiping between upgrades, but you are welcome to try upgrading without a wipe. However, no support will be provided if you file a bug without having wiped prior to submission.
Also, did you follow all of the steps that were listed in the second post?
Click to expand...
Click to collapse

Frantiic said:
thanks for the respons.
I used revolutinory.io to do everything.. i did wipe and all that, but still had the problem. i downloaded the patch in the topic, but how do i install it ? transfer it to my sd card and run it from the phone ? and then flash the rom?
thanks
Click to expand...
Click to collapse
A patch implies that you flash the ROM and then while still in recovery you flash the patch file and then reboot.

tpbklake said:
A patch implies that you flash the ROM and then while still in recovery you flash the patch file and then reboot.
Click to expand...
Click to collapse
yeah, but when im done with the flashing of the rom, the phone stops and i cant go any further .. thats the problem. but i will transfer it to the sd card and try

Frantiic said:
yeah, but when im done with the flashing of the rom, the phone stops and i cant go any further .. thats the problem. but i will transfer it to the sd card and try
Click to expand...
Click to collapse
Some roms auto reboot after flashing.
Pull the battery, then turn phone on by holding power and volume down at same time. Choose bootloader then recovery.
Now you can flash the patch.

scoobysnacks said:
Some roms auto reboot after flashing.
Pull the battery, then turn phone on by holding power and volume down at same time. Choose bootloader then recovery.
Now you can flash the patch.
Click to expand...
Click to collapse
thanks for the respons.
I do that, but when it says "Done" nothing happens. im stuck at the white background and the green hTC logo ..

Allright. After 6 reboots and recoverys and all that kind of jazz, it worked..

Please help! Galaxy S plus I9001 stuck booting into recovery *Fixed* :)

Hi folks,
I tried updating my S plus to ICS today by following the instructions listed here:
theandroidsoul.com/galaxy-s-plus-i9001-ice-cream-sandwich-update-install-cyanogenmod-9-cm9-pretty-good-and-working-rom
I read through the instructions and it looked pretty simple. I successfully installed Team Win recovery, performed a backup, wiped, and then installed the CM9 rom.
After the installation, the phone just boots back into Team Win recovery. I tried reverting to the backup, but it still just boots to recovery every time.
Now that I'm stuck in TeamWin recovery, I'm at a loss on what to try next .
Does anyone have any insight on how I can fix the problem?
Thanks,
Evan

Sometimes when you flash new Recovery (usually when replacing stock recovery with modified recovery for the first time) you get stuck at bootloop. It means /boot partition was damaged. After flashing TWRP did you restart your phone and it booted correctly, or did you install everything (TWRP, got backup, wipe and install new ROM) at once?
There is a guide for i9001 bootloops
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001#Boot-loop

divibyzero said:
Sometimes when you flash new Recovery (usually when replacing stock recovery with modified recovery for the first time) you get stuck at bootloop. It means /boot partition was damaged. After flashing TWRP did you restart your phone and it booted correctly, or did you install everything (TWRP, got backup, wipe and install new ROM) at once?
There is a guide for i9001 bootloops
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001#Boot-loop
Click to expand...
Click to collapse
So is reflashing in Odin what you are suggesting? Sorry if I'm misunderstanding.
And yes, after I flashed TWRP it booted fine, the 2nd time I went into recovery, performed the backup, wiped, then flashed the rom. I've tried wiping both the cache's with no success. I've also tried reflashing the rom, wiping the cache's, restoring with the backup, wiping cache's again... nothing seems to be working
What would be different if I had installed everything (TWRP, backup, wipe, rom) at the same time?
*Edit* Reflashed through Odin and it worked great! Thanks for the help, I'm a little scared to start messing with the phone again, but ICS is tempting...

Got the rom working with a fresh backup after fixing the bootloop. Thanks again for the link divibyzero, the troubleshooting steps solved the problem, whatever it was, and now its running ICS
These Samsungs S+'s seem to be a little more finiky than my HTC.

I am still stuck in CWM Recovery mod ! When I start Download mode, I dont have ODIN option ..only Download mod start screen! Can anybody help me?

Dapper SRB said:
I am still stuck in CWM Recovery mod ! When I start Download mode, I dont have ODIN option ..only Download mod start screen! Can anybody help me?
Click to expand...
Click to collapse
What do you mean by "don't have ODIN option"?

Is bootloader.tar which used to repair bootloop problem usable on ICS roms for SGS+??

alireza7991 said:
Is bootloader.tar which used to repair bootloop problem usable on ICS roms for SGS+??
Click to expand...
Click to collapse
yup, you can use bootloader or http://forum.xda-developers.com/showpost.php?p=32655216&postcount=17 CWM with AriesVe.ops

evan8683 said:
Hi folks,
I tried updating my S plus to ICS today by following the instructions listed here:
theandroidsoul.com/galaxy-s-plus-i9001-ice-cream-sandwich-update-install-cyanogenmod-9-cm9-pretty-good-and-working-rom
I read through the instructions and it looked pretty simple. I successfully installed Team Win recovery, performed a backup, wiped, and then installed the CM9 rom.
After the installation, the phone just boots back into Team Win recovery. I tried reverting to the backup, but it still just boots to recovery every time.
Now that I'm stuck in TeamWin recovery, I'm at a loss on what to try next .
Does anyone have any insight on how I can fix the problem?
Thanks,
Evan
Click to expand...
Click to collapse
Hello guys,
I think have the same problem, this morning I installed the Team Win recovery and after a reboot my phone come into recovery mode and even after a furthr reboot I'm blocked in a bootloop that leads me always on Team Win recovery.
I tried to wipe cache, dalvik cache, factory reset and even a wipe of the system but nothing happen.
I reinstalled rom but without success.
There is a way to fix this through adb?
Advanced thanks for help
Max.

krisslake said:
Hello guys,
I think have the same problem, this morning I installed the Team Win recovery and after a reboot my phone come into recovery mode and even after a furthr reboot I'm blocked in a bootloop that leads me always on Team Win recovery.
I tried to wipe cache, dalvik cache, factory reset and even a wipe of the system but nothing happen.
I reinstalled rom but without success.
There is a way to fix this through adb?
Advanced thanks for help
Max.
Click to expand...
Click to collapse
You didn't specify, so I'll assume you have an i9001, if this is not the case, you probably shouldn't follow these instructions
Just reflash the bootloader as explained here (http://forum.xda-developers.com/showpost.php?p=24831012&postcount=1330) and you'll be fine. I had the exact same problem when I had installed CWM on my own device. It's not with adb, but it's not like you have to do a lot of effort to get Odin or anything and it will fix your device.

Marshian said:
You didn't specify, so I'll assume you have an i9001, if this is not the case, you probably shouldn't follow these instructions
Just reflash the bootloader as explained here (http://forum.xda-developers.com/showpost.php?p=24831012&postcount=1330) and you'll be fine. I had the exact same problem when I had installed CWM on my own device. It's not with adb, but it's not like you have to do a lot of effort to get Odin or anything and it will fix your device.
Click to expand...
Click to collapse
Luckily I found a windows system
Istructions you report was perfect for my case...seem I solved my problem...thanks again.
There is some i need to do for report I solved my problem ?
Bye Max.

[Boot-Loop] Can I use dd to flash bootloader?
Guys, has anyone tried to use dd to flash bootloader partition?
I assume dd if=boot.img of=/dev/block/mmcblk0p8 bs=512 should work
Can somebody attach boot.img taken with dd so I could test?

error - can t acces system csc/cnx/system
hello. I have a problem. I had installed on the phone cm10. Now I switched to cm 9 but since we locked in botloader and I returned with odin. recowery mode now you did not have the option install from sd / card only update. My problem is that now go phone but I can not install gapps. ie install it says the installation is complete, restart give when I see me many times with yellow writing including my error appears so: can t access system csc / CNX / system. and after I start the application from google. to say you've tried many variations and if you try recovery-clockwork-5.5.0.4-phone crashes every time. Please help ... (I tried many variations of gapps). thanks in advance.back with another caveat: any clockwork I try to install say installation aborted. and in the recovery mode screen down to write I / / / status = 0 / / /

evan8683 said:
So is reflashing in Odin what you are suggesting? Sorry if I'm misunderstanding.
And yes, after I flashed TWRP it booted fine, the 2nd time I went into recovery, performed the backup, wiped, then flashed the rom. I've tried wiping both the cache's with no success. I've also tried reflashing the rom, wiping the cache's, restoring with the backup, wiping cache's again... nothing seems to be working
What would be different if I had installed everything (TWRP, backup, wipe, rom) at the same time?
*Edit* Reflashed through Odin and it worked great! Thanks for the help, I'm a little scared to start messing with the phone again, but ICS is tempting...
Click to expand...
Click to collapse
Hi Evan which release of Odin did you use I am also facing the same problem for the past 28 hours and not been able to resolve it. The problem is thay the Com Port does not pop up basically the phone is not being recognised by the computer.
Please help.

sunbaj said:
The problem is thay the Com Port does not pop up basically the phone is not being recognised by the computer. Please help.
Click to expand...
Click to collapse
You must properly install Samsung mobile drivers on your PC, kill Samsung Kies process (or even better: uninstall Kies) and enable USB debugging on your phone. Then it will work.

tetakpatak said:
You must properly install Samsung mobile drivers on your PC, kill Samsung Kies process (or even better: uninstall Kies) and enable USB debugging on your phone. Then it will work.
Click to expand...
Click to collapse
The problem was that I was using Windows 8. I was able to resolve the issue after doing it on Windows XP.

system problem

i have a google nexus one. about a day ago i tried to install kitkat 4.4.2 and i dont think it worked.so i wiped all data with clockworkmod.and now everytime i shutdown and reopen it goes directly to the fastboot/bootloader screen.it does not boot up.so please help i tried everything.

pricehockey4 said:
i have a google nexus one. about a day ago i tried to install kitkat 4.4.2 and i dont think it worked.so i wiped all data with clockworkmod.and now everytime i shutdown and reopen it goes directly to the fastboot/bootloader screen.it does not boot up.so please help i tried everything.
Click to expand...
Click to collapse
I recommend using 4EXT recovery. Also, try reinstalling the ROM.
But first, wipe everything (except SD card) and then install the ROM. Also, check the hboot.
Does it get stuck at the X logo? If yes, then boot to recovery and format boot + system, several times. This may be due to a corrupt boot + system file system. Then install the ROM.

[Q] Razr i - no possibility to flash custom rom or stock - bricked?

Hallo together,
I seem to have done something wrong while trying to flash the rom "RazRi_JB_X-2014-Jul-16".
Here is what i did:
- Unlocked to bootloader using official Motorola homepage
- Flashed CWM (non-touch) recovery using "Recovery Flasher by LeBobo v1.7", USB-Debugging was on
- Rebooted into bootloader and flashed "RAZRiRoot2" to prevent Stock-ROM from overwriting the recovery
- Tried to install the Custom ROM using CWM, but it fails to wipe cache (stuck on line "Formatting /cache")
Because it didn't work, i tried to reset everything as it was before to be able to try again - flashed stock-recovery using the Recovery Flasher by LeBobo, booted into bootloader and selected "Factory". The cell is now just showing the "Warning bootloader unlocked" warning and nothing else happens.
When i try to select the recovery in the bootloader menu, an image of a Android laying on its back with an opened hatch and a red warning symbol showing a "!" appears and nothing else happens.
I seem to have bricked my device, because i cant't really do anything now - is there any solution?
I read through different topics but could not find a real solution to this particular problem...
Thank you so much in advance for your help!

It's not bricked
At the moment u enter stock recovery with that android and red warning sy,bol, u need to press bot volume up + downp. Than it will enter stock recovery mode.
Those are the following things u can do to get custom rom,
1. Flash another recovery, cwm touch, cwm non-touch, twrp. They all work a little different.
2. Flash the custom rom and wipe everything, The wip can take some time. sometimes it will be seconds, sometimes it will take a couple of minutes. Every recovery behaves different, and every flash/wipe too.
3. enjoy
If u really want to go back to stock, flash your stock JB firmware by RSD-Lite.

Thank you very much for your answer. I restored the stock rom using RSD Lite and did a clean install of TWRP.
Then I did a Factory Reset and started to install the custom ROM.
The TWRP is now stuck at "Flashing File 1 of 1 /external_sd/RazRi_JB_X-2014-Jul-16.zip".
Is it normal that it takes more than five minutes or is something going wrong here? Is there something i forgot?

StarGeneral said:
Thank you very much for your answer. I restored the stock rom using RSD Lite and did a clean install of TWRP.
Then I did a Factory Reset and started to install the custom ROM.
The TWRP is now stuck at "Flashing File 1 of 1 /external_sd/RazRi_JB_X-2014-Jul-16.zip".
Is it normal that it takes more than five minutes or is something going wrong here? Is there something i forgot?
Click to expand...
Click to collapse
5 minutes is a bit too much. But that's the problem with this device. Every device behaves different and we haven't found out a solution too it.
At the moment i can't do much for you. I can only say try to wipe the partitions mannualy. Wipe system, data and cache. and mount system. And then try to install it. Maybe if that doesnt do the trick try again another recovery.
This from KTR-ROM
Code:
- Enter in TWRP or CWM
- Wipes required: data, system, cache y dalvik
*In CWM mount system must format before (Mount and storage -> Mount system)

Thanks again - that was it.
For some reason, TWRP did not automatically wipe the system-partition. It had to be mounted + wiped manually.
Not the custom ROM is up and running well. Installation took 35 minutes for some reason though...
Thank you so much for your help!

StarGeneral said:
Thanks again - that was it.
For some reason, TWRP did not automatically wipe the system-partition. It had to be mounted + wiped manually.
Not the custom ROM is up and running well. Installation took 35 minutes for some reason though...
Thank you so much for your help!
Click to expand...
Click to collapse
nice, glad that it worked

Abnormal booting.

Whenever i reboot or turn my phone back on, The phone shows the splash screen, but after 3 seconds, goes black, like it's about to boot into twrp. When i press and hold power button for few seconds, then it directly starts with boot animation, the SAMSUNG only boot animation (idk if it's "animation", whatever) Then the device works fine.
It's happening after i flashed TWRP and boot logo patcher. I've restored to stock os through odin, and did everything again to reinstall twrp. The issue still persists.
This thing is extremely annoying, cuz sometimes, it doesn't boot at all, and i have to hold the power button again, it's my daily driver, so i kinda freak out if anything happened to it or not (even through i know it's gonna happen, still). Can anyone provide me some info why it's happening?

ShadowMC74260 said:
(...) Can anyone provide me some info why it's happening?
Click to expand...
Click to collapse
You are the only one who can do a system logcat and also copy the log in TWRP and show it on the forum. Remove sensitive data from them, such as MAC address and imei.

ze7zez said:
You are the only one who can do a system logcat and also copy the log in TWRP and show it on the forum. Remove sensitive data from them, such as MAC address and imei.
Click to expand...
Click to collapse
Here, Are the files

Files are not uploading.

https://cdn.discordapp.com/attachments/773064249148178453/1048274000163389561/items.zip
i am sorry. But files were not uploading for some reason. Please get the files from here.

Did you wipe the internal memory and other partitions in TWRP before flashing the stock ROM?
Does the phone behave normally only after flashing the stock ROM (without TWRP)?
Does the problem occur after flashing only TWRP (without TWRP_Bootlogo_patcher)?

ze7zez said:
Did you wipe the internal memory and other partitions in TWRP before flashing the stock ROM?
Click to expand...
Click to collapse
When flashing through twrp, it wiped automatically.
ze7zez said:
Does the phone behave normally only after flashing the stock ROM (without TWRP)?
Click to expand...
Click to collapse
Yeah, it boots up without any disturbance and or works perfectly fine.
ze7zez said:
Does the problem occur after flashing only TWRP (without TWRP_Bootlogo_patcher)?
Click to expand...
Click to collapse
It worked fine like showing a brief warning and stuffs, and after confirming those, it boots fine. It started happening after i tried to install rom, but i failed in there. since i had no stock files available, i booted into a gsi, where i already had patched the bootlogo. So even then, it booted up perfectly fine. It's probably happening after moving back to stock. I don't reamember.

Before flashing the stock ROM, you should in TWRP wipe the internal storage and format data. Stock ROM = firmware from Samsung (and not GSI) must be installed via odin or heimdall.

ze7zez said:
Before flashing the stock ROM, you should in TWRP wipe the internal storage and format data. Stock ROM = firmware from Samsung (and not GSI) must be installed via odin or heimdall.
Click to expand...
Click to collapse
i've flashed my stock rom with odin and moved away from gsi. I am not using any gsi. I'll reflash my stock rom again after formating and wiping like you said.