Related
I built these from source for my convenience. Here they are.
bash-4.1 puts its config files in /system/etc/bash/ and the install script sets it all up.
good job , I for one rather rely on older versions witch I know what and what is not implemented on , as newer versions of busybox doesnt always mean better (learned that the hard way)
changelogs woudl be appreciated ..
gdanko said:
I built these from source for my convenience. Here they are.
bash-4.1 puts its config files in /system/etc/bash/ and the install script sets it all up.
Click to expand...
Click to collapse
Much appreciated on the newer versions. One question. Where does it look for your customer .bashrc? It doesn't seem to be abiding by the ones put in /system/etc/bash/
/system/etc/bash/bashrc
/system/etc/bash/bash_profile
Not hidden files
gdanko said:
I built these from source for my convenience. Here they are.
bash-4.1 puts its config files in /system/etc/bash/ and the install script sets it all up.
Click to expand...
Click to collapse
Nice. Bash plus this will make running shell command much less tedious.
Thank youu!!!
Thanks Great Job
Aweeesome
Thanks.
Not support unicode.
#busybox ls display Japannese and Chinese as a lot of ???????
HTC released gingerbread via OTA but they did not support additional modules. This thread has flashable zips for both the leaked kernel and the one from the "OTA".
Added flashable modules to attachments that are flashable in recovery.
I have created a zip of some of the more useful modules for our device:
Code:
cpufreq_conservative.ko
cpufreq_smartass.ko (thanks Chad for the help here)
ext4.ko
jbd2.ko (necessary for me to load ext4)
tun.ko
perflock_disable.ko (I actually compiled this one a little different but confirmed it would load and not get the exec format error)
Update: Smartass is working now with assistance from chad in resolving those errors. Decided to not worry about interactive for now.
Further information:
If you don't use the CWM flashable zip you will need to load perflock_disable a special way as it needs to be called with a special parameter to make it work correctly. Try adding below to a script. Credit to Calkulin for the script.
Code:
if [ -e /system/lib/modules/perflock_disable.ko ]; then
insmod /system/lib/modules/perflock_disable.ko
if [ $? -eq 0 ]; then
echo "Perflock DISABLED"
else
addr=`awk '$3 == "perflock_notifier_call" { print "0x"$1; }' /proc/kallsyms`
if [ -n "$addr" ]; then
insmod /system/lib/modules/perflock_disable.ko "perflock_notifier_call_addr=$addr"
if [ $? -eq 0 ]; then
echo "Perflock DISABLED"
else
echo "ERROR!!! Perflock could NOT be DISABLED"
fi
fi
fi
fi
Credits:
Conap (for BootManager and helping me test ext4 on an SD ROM)
XDA (for teaching me so much about Android)
HTC (for the kernel source)
Chad0989 (for assistance in getting smartass CPU governor working)
Coolbho3000 (perflock_disable)
Calkulin for the module load script
anyone else who inspired me (apologize if I forgot)
I have attached a zip file to this. If you are not a dev you can still use the modules here but some basic ADB/terminal knowledge would be needed. The modules are open for testing though.
Attached zip files and CWM-flashable zip files for both OTA and leak-based ROMs.
inc_modules.zip - Just the loadable modules.
inc_modules_ota.zip - just the loadable modules - OTA-based ROMS (August leak)
inc_modules_ota_091811.zip - just the loadable modules - OTA-based ROMS (actual OTA from September)
inc_modules_CWM_flashable.zip - flashable zip that will also autoload modules at boot.
inc_modules_ota_CWM_flashable.zip - flashable zip that will also autoload modules at boot - OTA-based ROMS (August leak)
inc_modules_ota_091811_CWM_flashable.zip - flashable zip that will also autoload modules at boot - OTA-based ROMS (Actual OTA from September)
I'm glad some one took this up I had been wondering the same thing since HTC opened the dev section. I had found another site that had a more extensive write up on how to build kernels but I'm not very fluent in linux and was a little intimidated at trying. At least I now know that it can be done. Maybe we can get Chad to try and port it over?
Awesome. A ray of hope.
Good job Tiny! I know someone was just asking for a tun.ko module and now I can't remember who it was. Hopefully they see your post.
jermaine151 said:
Good job Tiny! I know someone was just asking for a tun.ko module and now I can't remember who it was. Hopefully they see your post.
Click to expand...
Click to collapse
Thanks!
I'm trying to add more existing modules but my compiler treats warnings as errors so it won't build. Chad, if you see this post, any advice here?
tiny4579 said:
Thanks!
I'm trying to add more existing modules but my compiler treats warnings as errors so it won't build. Chad, if you see this post, any advice here?
Click to expand...
Click to collapse
--prefix
Sent from my ADR6300 using XDA App
hightech316 said:
--prefix
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
I actually got them to build but they won't load still. I will play around with it more.
This is awesome. I was hoping for a tun.ko module! Now, do I just grab these and drop then in system/lib/modules and they should just work? Or are there steps I need to take to make them work? (I am honestly only concerned with the tun.ko)
oh wow this is incredible great job tiny!!! and the reason you probably cant get those other governors to work is because htc released an uncomplete source
jskolm said:
This is awesome. I was hoping for a tun.ko module! Now, do I just grab these and drop then in system/lib/modules and they should just work? Or are there steps I need to take to make them work? (I am honestly only concerned with the tun.ko)
Click to expand...
Click to collapse
Just drop in the ones you want and run insmod /system/lib/modules/tun.ko for tun.ko. You will have to do it at boot each time or get the dev to write an init.d script to load it.
tiny4579 said:
Just drop in the ones you want and run insmod /system/lib/modules/tun.ko for tun.ko. You will have to do it at boot each time or get the dev to write an init.d script to load it.
Click to expand...
Click to collapse
would i need to make one for every module?
JoelZ9614 said:
would i need to make one for every module?
Click to expand...
Click to collapse
Joel,
No, just one script should work. I believe Synergy ROM already has the init.d script for some of them. See 00cpufreq_modules in /system/etc/init.d
All,
Updated OP with latest zip file. If you have downloaded previously, redownload to get the latest.
would it be likes this?
http://www.multiupload.com/J9WTSA4VWF
JoelZ9614 said:
would it be likes this?
http://www.multiupload.com/J9WTSA4VWF
Click to expand...
Click to collapse
The first line should be:
Code:
#!/system/bin/sh
and it needs to have execute permissions or it won't execute. Also make sure to save it in UNIX format. I would also add the smartass module as it is quite popular. To test type lsmod from adb or terminal after boot. Hope this helps.
tiny4579 said:
The first line should be:
Code:
#!/system/bin/sh
and it needs to have execute permissions or it won't execute. Also make sure to save it in UNIX format. I would also add the smartass module as it is quite popular. To test type lsmod from adb or terminal after boot. Hope this helps.
Click to expand...
Click to collapse
eeh im not good with init.d scripts lol
ok i think i got it would it be like this?
Code:
#!/system/bin/sh
/system/bin/insmod /system/lib/modules/tun.ko
Every shell script should contain
#!/system/bin/sh
Sent from my ADR6300 using XDA App
JoelZ9614 said:
ok i think i got it would it be like this?
Code:
#!/system/bin/sh
/system/bin/insmod /system/lib/modules/tun.ko
Click to expand...
Click to collapse
Exactly!
Then just make a line for each module.
EDIT: Though you could just write it like this:
Code:
#!/system/bin/sh
insmod /system/lib/modules/tun.ko
Though to be safe and to make sure you are running that particular insmod command you can leave it the way you have it.
ok done its in my rom RLS3 Thanks Tiny Great work
JoelZ9614 said:
ok done its in my rom RLS3 Thanks Tiny Great work
Click to expand...
Click to collapse
No prob! It's been a good project for me.
THIS IS NOT MY WORK! I'M POSTING THIS WITH PERMISSION FROM zeppelinrox
Back in the ancient times (Eclair,Froyo,Gingerbread) the stock android launcher was....Slow to put it nicely. Zeppelinrox wrote a script that changes the oom values inside of android to put the launcher in it's rightful place. No more redrawing launchers weird lagging etc etc. He's done it again for ICS.
This is a little more involved than simply executing a script at boot time though. 4.0 is to Gingerbread what Froyo was to Cupcake! Pretty big differences but if you're up to the challenge then feel free to CLICK HERE http://forum.xda-developers.com/showthread.php?t=991276 and check it out for yourself!
I'm just posting this as an additional bit of information. Dropping in from the MyTouch 4G Forum as I recently got a "broken" vibrant from a customer. (Camera just needed reseating)
Oh boy, I think I'm entering this game! Wish me luck.
Arhg, it's really much to do! Any tutorial? I don't ever know what step I should take first! please, explain us what you did. Thanks!
Say why not attach a patched services.jar
Zeppelinrox, could you please provide us with updated info about the installation process?
I see too many files.
Enviado desde mi SGH-T959 usando Tapatalk
i am using the zenwich beta rom, tried this, but got errors during the script run, so i tried updating the SU binary. I ran into trouble setting permissions on the /system/xbin/su
i was using file expert to change permissions, but i guess that wasn't enough.
does this have to get pushed through adb?
ps, i just flashed the newest zenwich beta...#4, so i have a completely fresh machine.
i also understand that you shouldn't/cant change a file that is in use, aas is the case with the /system/xbin/su
and, does zenwich need this mod?
thanks, 1fd
a patched services.jar would be awesome.
Wouldn't it be....
G00DFe77a said:
a patched services.jar would be awesome.
Click to expand...
Click to collapse
I'm still learning how to do this myself. I posted this so the developers would be aware of it if they felt like incorporating it into a rom.
COLOR="Red"]This thread will discontinue, Now I'm published my new mod's thread under Magisk, that mod includes Whole new ViPERFX app and many other mods and upcomings so From now everybody please follow this thread below:
[Module] ViPERFX
https://forum.xda-developers.com/apps/magisk/viperfx-t3667145[/COLOR][/SIZE][/B]
Introduction:
ViPER4Android is very popular audio mod around the world of Android and probably the best audio mod ever made. But there is so many complexity ViPER4Android couldn't go further through, so I wish "ViPER-FX" could be a project to let our beloved ViPER4Android step in advance. Original V4A details at ViPER4Android Official forum.
Modifications:
+ Based on ViPER4Android v2.5.0.5
+ New Material UI and Icon
+ App rotation enabled.
+ Default install as system app to prevent task kill.
in MIUI or some rom could be installed as user-app
for IRS compatibility [Experimental]
+ The zip edition includes apk.
Recommendation:
* Magisk Manager, Framework installed.
* Android 5.0+
* To update from ViPER-FX v4.0 (v4.0 only) first remove it.
How to install?
* Flash the zip using Magisk Manager or Custome recovery.
# Track this thread using the URL below.
URL: [url]http://forum.xda-developers.com/showthread.php?t=3535401[/URL]
Thanks To:
Code:
[user=4470081]@topjohnwu[/user] for Magisk Framework.
[user=3901724]@zhuhang[/user] and ViPER520 (Founders of ViPER4Android).
[user=4445176]@guitardedhero[/user] | [user=5704037]@repey6[/user] | [user=5210243]@exodius48[/user] | [user=6118476]@#mrk[/user]
for helping/support/testing.
...and those I forgot to mention.
I spend dedicated time, made pressure on brain and did hard work to make this perfect
If you like my post please hit Thanks and give a rate....
~~ Feel The power of ViPER-FX ~~
Contributors
metaspook
Version Information
Status: Stable
Current Stable Version: 4.1
Stable Release Date: 2017-01-13
The long waited finally come, will try this out.
the title is a bit misleading:
-this is not [Magisk], this is a [Module]
-it's not 100% clear if you packed the Magisk module or if you also offer a modded App (in thread description)
-it also has the same id as @topjohnwu 's module...
id=v4a
name=ViPER-FX
version=Base v2.5.0.5 | MKM v4.0
versionCode=3
author=ViPER’s Audio | Mod by Metaspook
description=ViPER-FX is a system wide audio enhancing software, modified edition of ViPER4Android.
support=https://www.androidfilehost.com/?w=files&flid=143525
donate=http://vipersaudio.com/blog/?page_id=95
Click to expand...
Click to collapse
@metaspook
Can you delete V4A app inside "\system\priv-app\ViPERFX" in next release? Because if V4A app installed inside /system/ there will be no sound improvement by IRS. Tested on my device running MIUI rom, dunno on other rom.
I use sepaker & many times change the IRS, but no sound improvement.
crusader727 said:
the title is a bit misleading:
-this is not [Magisk], this is a [Module]
-it's not 100% clear if you packed the Magisk module or if you also offer a modded App (in thread description)
-it also has the same id as @topjohnwu 's module...
Click to expand...
Click to collapse
Got it... actually I had to make this thread in short time making this of thread n sort it as well as possible is a bit hard something could be missing, but this thread will be more informative, well sorted soon...
Thank you.
exodius48 said:
@metaspook
Can you delete V4A app inside "\system\priv-app\ViPERFX" in next release? Because if V4A app installed inside /system/ there will be no sound improvement by IRS. Tested on my device running MIUI rom, dunno on other rom.
I use sepaker & many times change the IRS, but no sound improvement.
Click to expand...
Click to collapse
Do u'v installed Magisk n flash the zip through it?
B'cz this is a whole new way to dealing with system.
If u did but after that also don't work let me know.
metaspook said:
Do u'v installed Magisk n flash the zip through it?
B'cz this is a whole new way to dealing with system.
If u did but after that also don't work let me know.
Click to expand...
Click to collapse
Yes bro, i already used magisk long time ago.
Recently compared with V4A original (installed as user app /data/app/) & V4A module by topjohnwu, my device can read IRS and has sound improvement.
I don't know this issue is MIUI related or not, but I always get that issue if V4A app installed as system app (/system/app or /system/priv-app).
exodius48 said:
Yes bro, i already used magisk long time ago.
Recently compared with V4A original (installed as user app /data/app/) & V4A module by topjohnwu, my device can read IRS and has sound improvement.
I don't know this issue is MIUI related or not, but I always get that issue if V4A app installed as system app (/system/app or /system/priv-app).
Click to expand...
Click to collapse
OK I'll release next update separately..
I can't tell whether or how this differs from the existing V4A module offered by topjohnwu.
Cool. I'd like to try this out. I just had some questions:
1. What do these commands do:
Code:
/data/magisk/sepolicy-inject --live -s mediaserver -t mediaserver_tmpfs -c file -p read,write,execute
/data/magisk/sepolicy-inject --live -s audioserver -t audioserver_tmpfs -c file -p read,write,execute
2. Why are the following folders blank?
Code:
system/etc
system/lib/soundfx
system/vendor/etc
oreo27 said:
Cool. I'd like to try this out. I just had some questions:
1. What do these commands do:
2. Why are the following folders blank?
Click to expand...
Click to collapse
1. It helps to keep Viper FX alive in SELinux enforcement.
2. Into these directories necessary files will be extracted or pulled from original /system.
Thanks to wanna know. :good:
metaspook said:
1. It helps to keep Viper FX alive in SELinux enforcement.
2. Into these directories necessary files will be extracted or pulled from original /system.
Thanks to wanna know. :good:
Click to expand...
Click to collapse
Oh. I didn't think to check in the update-binary. It feels like this is a complicated script for sure:
Code:
# Push files
unzip -oq $ZIP "system/*" -d $MODPATH
unzip -pq $MODPATH/system/priv-app/ViPERFX/ViPERFX.apk assets/libv4a_fx_jb_$DRVARCH.so > $MODPATH/system/lib/soundfx/libv4a_fx_ics.so
ui_print "[OK] Pushing files."
# Config files modification.
for X in /system/etc/audio_effects.conf /system/etc/htc_audio_effects.conf /system/vendor/etc/audio_effects.conf; do
cp -af $X $MODPATH$X
sed -i '/v4a_fx {/,/}/d' $MODPATH$X
sed -i '/v4a_standard_fx {/,/}/d' $MODPATH$X
sed -i 's/^libraries {/libraries {\n v4a_fx {\n path \/system\/lib\/soundfx\/libv4a_fx_ics.so\n }/g' $MODPATH$X
sed -i 's/^effects {/effects {\n v4a_standard_fx {\n library v4a_fx\n uuid 41d3c987-e6cf-11e3-a88a-11aba5d5c51b\n }/g' $MODPATH$X
done; ui_print "[OK] Config modification."
Does this mean that if I uninstall this mod, Viper is completely uninstalled without any changes present in my entire device? If so, it's a pretty good implementation.
Nice! Works just fine on my Nexus 6. Will this be submitted to the Magisk repo? Would be useful to have it in the manager...
oreo27 said:
Oh. I didn't think to check in the update-binary. It feels like this is a complicated script for sure:
Code:
# Push files
unzip -oq $ZIP "system/*" -d $MODPATH
unzip -pq $MODPATH/system/priv-app/ViPERFX/ViPERFX.apk assets/libv4a_fx_jb_$DRVARCH.so > $MODPATH/system/lib/soundfx/libv4a_fx_ics.so
ui_print "[OK] Pushing files."
# Config files modification.
for X in /system/etc/audio_effects.conf /system/etc/htc_audio_effects.conf /system/vendor/etc/audio_effects.conf; do
cp -af $X $MODPATH$X
sed -i '/v4a_fx {/,/}/d' $MODPATH$X
sed -i '/v4a_standard_fx {/,/}/d' $MODPATH$X
sed -i 's/^libraries {/libraries {\n v4a_fx {\n path \/system\/lib\/soundfx\/libv4a_fx_ics.so\n }/g' $MODPATH$X
sed -i 's/^effects {/effects {\n v4a_standard_fx {\n library v4a_fx\n uuid 41d3c987-e6cf-11e3-a88a-11aba5d5c51b\n }/g' $MODPATH$X
done; ui_print "[OK] Config modification."
Does this mean that if I uninstall this mod, Viper is completely uninstalled without any changes present in my entire device? If so, it's a pretty good implementation.
Click to expand...
Click to collapse
1. The code I wrote looks a bit complicated but its for to reduce the size of the module (you can see I didn't packed the driver separately, codes are extracts those from the apk) and for more task will be done in less lines.
2. Yes.. obviously that's why using Magisk framework is so useful. It wont change anything in /system while installing nor in uninstalling your /system would be intact.
Didgeridoohan said:
Nice! Works just fine on my Nexus 6. Will this be submitted to the Magisk repo? Would be useful to have it in the manager...
Click to expand...
Click to collapse
Thanks... yes I wish also soon.
exodius48 said:
Yes bro, i already used magisk long time ago.
Recently compared with V4A original (installed as user app /data/app/) & V4A module by topjohnwu, my device can read IRS and has sound improvement.
I don't know this issue is MIUI related or not, but I always get that issue if V4A app installed as system app (/system/app or /system/priv-app).
Click to expand...
Click to collapse
Actually I pushing the apk into the system cause if Viper install as user app in data, 3rd party or internal app killer kill it and Viper looses to output the effect even also when remove from recent list. but I have an idea if its just happens with your MIUI rom... can you give me your ROM's 'build.prop" file ???
Is not working for me, IS activated on Magisk Modules Install,
But V4A say "Install/Update now?", Samsung S5 G900m, Is rooted using SuperSU 2.79, Latest Magisk Manager/Installer,
I Installed this V4A why magisk "Refuses" to open Modules download page "No Modules Found", And i have to download manually from internet. (SafetyNet says RED, Root and Magisk is green in Magisk Manager)
V4A is installed as System App, And SELINUX is Permissive,
I Try to change V4A to user APP, But not working;
metaspook said:
Actually I pushing the apk into the system cause if Viper install as user app in data, 3rd party or internal app killer kill it and Viper looses to output the effect even also when remove from recent list. but I have an idea if its just happens with your MIUI rom... can you give me your ROM's 'build.prop" file ???
Click to expand...
Click to collapse
Yes you're right. But on MIUI (especially MIUI 8 on my device) i can control it. We can lock app into taskbar and turn off MIUI optimization for selected app by turn off background restriction. Those will prevent MIUI kill running app.
build.prop file attached. :good:
metaspook said:
1. The code I wrote looks a bit complicated but its for to reduce the size of the module (you can see I didn't packed the driver separately, codes are extracts those from the apk) and for more task will be done in less lines.
2. Yes.. obviously that's why using Magisk framework is so useful. It wont change anything in /system while installing nor in uninstalling your /system would be intact.
Click to expand...
Click to collapse
This is pretty good. I installed this and it's working great. Just a quick question, I don't suppose it can work on phone calls as well? I was looking to get my bluetooth volume increased.
oreo27 said:
This is pretty good. I installed this and it's working great. Just a quick question, I don't suppose it can work on phone calls as well? I was looking to get my bluetooth volume increased.
Click to expand...
Click to collapse
Not sure about it... Test urself, look can work or not
I've been out of the mod scene for a few years so I feel like a noob all over again.
Is there a BusyBox (google has been 0 help) or bb alternative for Android 13?
I just want to have more control over my rooted stock pixel 7s theme and appearance. Thank you in adv
Jspex said:
I've been out of the mod scene for a few years so I feel like a noob all over again.
Is there a BusyBox (google has been 0 help) or bb alternative for Android 13?
I just want to have more control over my rooted stock pixel 7s theme and appearance. Thank you in adv
Click to expand...
Click to collapse
You can find a BusyBox here...
[TOOLS][ZIPS][SCRIPTS] osm0sis' Odds and Ends [Multiple Devices/Platforms]
osm0sis' Odds and Ends -- Misc./Batch Tools, Flashable Zips, Scripts, etc. General Information In a nutshell, I just wanted a single thread to gather links to some of my other, larger projects, but also serve as a spot I could put some smaller...
forum.xda-developers.com
Lughnasadh said:
You can find a BusyBox here...
[TOOLS][ZIPS][SCRIPTS] osm0sis' Odds and Ends [Multiple Devices/Platforms]
osm0sis' Odds and Ends -- Misc./Batch Tools, Flashable Zips, Scripts, etc. General Information In a nutshell, I just wanted a single thread to gather links to some of my other, larger projects, but also serve as a spot I could put some smaller...
forum.xda-developers.com
Click to expand...
Click to collapse
Thank you I will check that thread out. Much appreciated