fingerprint - OnePlus 3T Questions & Answers

is there anyway to have fingerprint setup but without the addition pin/pattern lockscreen ?
i want to have fingerprint setup for my bank app but without those added screen pin/pattern lock
Sent from my ONEPLUS A3000 using Tapatalk

anyone can help plz?
Sent from my ONEPLUS A3000 using Tapatalk

Not that I'm aware of. The only possibility I can think of is setting everything up initially, then deleting lockscreen.db from one of the system folders.
*Warning* that's just a workaround I remember from my Nexus 6p when TWRP restores would cause pins not to work. I by no means endorse that this will work, it is it meant as a starting point to research.

inst1029 said:
is there anyway to have fingerprint setup but without the addition pin/pattern lockscreen ?
i want to have fingerprint setup for my bank app but without those added screen pin/pattern lock
Sent from my ONEPLUS A3000 using Tapatalk
Click to expand...
Click to collapse
I don't think that's an option. I haven't seen it on any rom. It's more for your protection as a user in case the fingerprint isn't recognized

In resurrection remix nougat you can do this. All you have to do is enable quick unlock in regular settings and then fp unlock in configurations (which are the added settings from RR). Then all you can unlock your phone just by touching the fingerprint sensor and I'm not sure about your specific back app. But I can say I use adp mobile solutions with my fingerprint to log in.

Related

FingerPrint Lock Mod

Hello
Is there any mod for fingerprint Lock for XZ.? Apart from 3rd party application
sriszone said:
Hello
Is there any mod for fingerprint Lock for XZ.? Apart from 3rd party application
Click to expand...
Click to collapse
An actual working fingerprint lock and not just a novelty? How would the Z reliably scan your fingerprint?
Or is there some sort of external scanner peripheral that I'm unaware of?
Sent from my C6603 using Tapatalk 2
Yes u are right. i accept. i want the mod just like 3rd party applications. i want it used as system wide.

ROM with Profiles

I am looking to replace CyanogenMod on my N6, but am attached to their System Profiles feature. Specifically the ability to completely skip the lockscreen when attached to WiFi or Bluetooth.
The new LP system security feature adds a lockscreen that I don't want, and cannot bypass even with lockscreen notifications turned off.
I'd be happy with the stock ROM and a tweak to bypass the lockscreen if anyone knows of one.
I've been reading all of the various ROM features, but none have this listed (that I saw. Bit of a needle in a haystack). It may be there, but I missed it, or just not considered important enough to list as a feature.
Thanks.
I just use tasker and secure settings for this. Though I haven't used 5.1 so cannot confirm it works
Thanks. I will take a look. I have a Tasker license, although I haven't used it in ages.
Sent from my iPad using Tapatalk HD

miui 8 rom

confirmed working
with no problems with me
rom is super fast and smooth
MIUIv8(6.0.1)_ZUK_Z1_STABLE.zip
https://www.androidfilehost.com/?fid=457095661767103634
Can you post some screenshot?
Is this zip flashable via TWRP
any bugs
based on cos ? zui ?
Narzoth said:
Can you post some screenshot?
Click to expand...
Click to collapse
SS miui ??? Omg
Wysłane z mojego ZUK Z1 przy użyciu Tapatalka
Been using this ROM for quite a few hours now, absolutely no problems
original chinese thread http://bbs.lenovomobile.cn/z1/t272379/
Sent from my K920 using Tapatalk
navigation buttons not working
sahu.prashant said:
Been using this ROM for quite a few hours now, absolutely no problems
Click to expand...
Click to collapse
navigation buttons and dual sim not working for me
sahu.prashant said:
Been using this ROM for quite a few hours now, absolutely no problems
Click to expand...
Click to collapse
It it possible to switch sim slots on and off like in cos12.1?
but Volte not working mentioned in link site
---------- Post added at 11:12 AM ---------- Previous post was at 11:10 AM ----------
sahu.prashant said:
Been using this ROM for quite a few hours now, absolutely no problems
Click to expand...
Click to collapse
what about double tap to wake and fingerprint scan is it works?
Abhiz1 said:
navigation buttons and dual sim not working for me
Click to expand...
Click to collapse
It has to be enabled . You have to enable them in settings. Explore it.
strongst said:
It it possible to switch sim slots on and off like in cos12.1?
Click to expand...
Click to collapse
Yes you can however I think StatusBar shows only status of SIM1 which is kinda weird
---------- Post added at 01:27 PM ---------- Previous post was at 01:25 PM ----------
hari1419 said:
but Volte not working mentioned in link site
---------- Post added at 11:12 AM ---------- Previous post was at 11:10 AM ----------
what about double tap to wake and fingerprint scan is it works?
Click to expand...
Click to collapse
Volte doesn't work.
Yes double tap to wake and fingerprint works flawlessly... In fact I find fingerprint detection to be snappier than ever in MiUi
sahu.prashant said:
Yes you can however I think StatusBar shows only status of SIM1 which is kinda weird
Click to expand...
Click to collapse
OK, that's not so good
Stupid question... Our z1 has VoLTE?
Inviato dal mio ZUK Z1 utilizzando Tapatalk
strongst said:
OK, that's not so good
Click to expand...
Click to collapse
Yep, not that good but then had no problems with cellular calls from either SIM. I could be missing something but then I literally scanned the entire settings but couldn't find a workaround for showing signal status of SIM 2 in status bar.
Plus I did find a menu for choosing what navbar buttons do but no option to toggle navbar lol.
Although I couldn't get Xposed working on this ROM and neither SuperSU. Although the ROM is pre-rooted but procedure for granting root access to an app will at least take you 25 seconds which is such a pain in the **s.
But then I'm going to use it for at least a few days. Never thought MiUi will ever be this stable for our device
sahu.prashant said:
Yep, not that good but then had no problems with cellular calls from either SIM. I could be missing something but then I literally scanned the entire settings but couldn't find a workaround for showing signal status of SIM 2 in status bar.
Plus I did find a menu for choosing what navbar buttons do but no option to toggle navbar lol.
Although I couldn't get Xposed working on this ROM and neither SuperSU. Although the ROM is pre-rooted but procedure for granting root access to an app will at least take you 25 seconds which is such a pain in the **s.
But then I'm going to use it for at least a few days. Never thought MiUi will ever be this stable for our device
Click to expand...
Click to collapse
Thanks for the info, this will help others too :good:
Copy Paste:Google translation
MIUI 8 Known BUG list
Adaptation platform common bug (that is, the following BUG need MIUI official repair):
1: The application lock is invalid
2: long screenshot invalid
2: three-point screenshot is invalid
3: Hot in question (which set a hot switch problem, but click on the dropdown hotspots switch can be used normally)
4: The theme has problems including fonts can not be replaced and so on
5: The application of dual open can not be used
7: Dual card, the status bar does not show the card 2 signal (but the actual card can double the normal use)
8: single card in dual card can not be closed
Adaptation Package Issues (Waiting for Night Repair)
1. SMS notifications abnormal color (white top SMS suspension notice, do not see the content)
2. Apply the history thumbnails all in gray
3. Shutdown interface or the original
4. There is no pop-up when the program is stopped
5. Unlock the occasional skip fingerprints, you must use other means to unlock (there? This is too accidental, the sensor is not a panacea)
6, call recording is invalid
7, some people can not be opened after screenshots (DCIM can be stored into the internal directory, the directory will be deleted solve Screenshots)
8, some people in the application (such as QQ or micro letter) to open the camera will flash back
Other issues include:
Charging speed will be slower than the official, power consumption faster than the official.
After the holster mode is turned on, turning on the holster will brighten the screen, but when the holster is turned off, the screen will be unlocked.
As for the charging speed is very slow feedback, WIFI speed exception and the like, personal problems, please be sure to double-heavy brush can be
i flashed gapps after setting up miui but it started but i cant access my phone
so i rebooted and tried again but gapps not working
how to install the rom
bro please help me i want to no the process how to install it i am not understanding how to install please help me bro.

Fingerprint sensor in OOS 4.5.0

The OOS 4.5.0 update completely broke the fingerprint sensor right?
Most of the times, it takes almost three seconds to unlock the phone.
J.Diogo said:
The OOS 4.5.0 update completely broke the fingerprint sensor right?
Most of the times, it takes almost three seconds to unlock the phone.
Click to expand...
Click to collapse
all is fine here. super fast as usual. try clean the FP sensor and re-register your fingerprint
koax88 said:
all is fine here. super fast as usual. try clean the FP sensor and re-register your fingerprint
Click to expand...
Click to collapse
Do you use the official OnePlus Launcher?
J.Diogo said:
Do you use the official OnePlus Launcher?
Click to expand...
Click to collapse
Nope,im on nova launcher
Sent from my ONEPLUS A3010 using Tapatalk
koax88 said:
Nope,im on nova launcher
Sent from my ONEPLUS A3010 using Tapatalk
Click to expand...
Click to collapse
I ask that because I think that's the source of the problem. Every time I set the wallpaper via anything other than the OnePlus launcher, unlocking the phone with the fingerprint gets really slow.
Does the same happen to you? How do you set your wallpaper?
J.Diogo said:
I ask that because I think that's the source of the problem. Every time I set the wallpaper via anything other than the OnePlus launcher, unlocking the phone with the fingerprint gets really slow.
Does the same happen to you? How do you set your wallpaper?
Click to expand...
Click to collapse
I don't normally use the stock launcher. But I just tried it (set the stock launcher as the default launcher) and set the wallpaper within the stock Gallery app. Fingerprint sensor and unlocking works fine (virtually instantaneous).
If anything, 4.5.0 seems to have made the fingerprint sensor a bit faster and more consistent.
redpoint73 said:
I don't normally use the stock launcher. But I just tried it (set the stock launcher as the default launcher) and set the wallpaper within the stock Gallery app. Fingerprint sensor and unlocking works fine (virtually instantaneous).
If anything, 4.5.0 seems to have made the fingerprint sensor a bit faster and more consistent.
Click to expand...
Click to collapse
What if you set the wallpaper by holding down on the home screen in the stock launcher and then pressing Wallpapers and choosing a stock one? If I do it this way the unlocking is very fast. But if I set the wallpaper via a custom launcher the unlocking becomes laggy.
J.Diogo said:
What if you set the wallpaper by holding down on the home screen in the stock launcher and then pressing Wallpapers and choosing a stock one? If I do it this way the unlocking is very fast.
Click to expand...
Click to collapse
Very fast for me, also. Again, almost instantaneous.
J.Diogo said:
But if I set the wallpaper via a custom launcher the unlocking becomes laggy.
Click to expand...
Click to collapse
This is how I normally set the wallpaper (with custom launcher). I use Apex launcher, and unlocking the phone is virtually instantaneous.
The FP sensor works super fast for me on OOS 4.5.0. No issues here.
Try clearing the ART/dalvik cache from TWRP or stock recovery.
No issues here with stock launcher and latest update.
Unleashed by ONEPLUS 3T rooted
gr8techie said:
The FP sensor works super fast for me on OOS 4.5.0. No issues here.
Try clearing the ART/dalvik cache from TWRP or stock recovery.
Click to expand...
Click to collapse
Tired it. No help. Still slow AF. When I place my finger on the reader, the phone vibrates, but instead of waking the screen up immediately, it hangs a bit and then wakes the screen. So its vibration > hang > screen on. Instead of vibration > screen on.
I guess I'll just have to clean flash the next update...

Love the new quick launch feature on the OnePlus 6T. Here's how to use it!

Unlike other OEMs out there that use the in-display fingerprint scanner to just unlock the device, OnePlus actually gives you the ability to quickly launch other apps as well. That's just frigging amazing and I absolutely love it. You can check the full tutorial here - https://themrphone.com/article/oneplus-6t-quick-launch-apps-screen-unlock
Kind of a bummer that you still need to wake the display in the first place to actually use the in-display fingerprint scanner, but still, this is good nonetheless.
Nice, thanks for info.
Yes, completely agree that having to wake the display in the first place to actually use the in-display fingerprint scanner is a bit of a step back. Fingers crossed for a Magisk module!
tmobile version doesn't have this yet. just so everyone knows.
"Kind of a bummer that you still need to wake the display in the first place to actually use the in-display fingerprint scanner, but still, this is good nonetheless."
I think I'll be using the "touch to wake" option
hallo dare said:
Nice, thanks for info.
Yes, completely agree that having to wake the display in the first place to actually use the in-display fingerprint scanner is a bit of a step back. Fingers crossed for a Magisk module!
Click to expand...
Click to collapse
The screen has to be woken in order to light your finger. UD readers use a camera behind the OLED panel to take a picture of your fingerprint, and the panel is what actually lights your finger for that shot. The only compromise I could see would be something to keep the rest of the screen dim/blank and only activate the fingerprint area, but it'll still require you to wake the screen.
chrisliphart said:
The screen has to be woken in order to light your finger. UD readers use a camera behind the OLED panel to take a picture of your fingerprint, and the panel is what actually lights your finger for that shot. The only compromise I could see would be something to keep the rest of the screen dim/blank and only activate the fingerprint area, but it'll still require you to wake the screen.
Click to expand...
Click to collapse
Yeah, aod is probably something that can do the job at the lowest acceptable lighting requirement to read the FP.
My "Settings" app carashes when I try to enter on that menu (quick launch)... What should I do?
hallo dare said:
Yeah, aod is probably something that can do the job at the lowest acceptable lighting requirement to read the FP.
Click to expand...
Click to collapse
When you touch the fingerprint reader area the pixels behind it light up to 100% brightness in order to illuminate your finger.
The "tap to wake" feature already available pretty much solves this "problem". You simply press your finger onto the "off" display in the place where the fingerprint reader is located (easy to do after some practice) and the display turns on, fignerprint scanner illuminates and reads your finger which then unlocks the phone.
hallo dare said:
Yeah, aod is probably something that can do the job at the lowest acceptable lighting requirement to read the FP.
Click to expand...
Click to collapse
I do hope they tweak how bright the screen has to be, but from all I've read, those pixels have to be at full blast to get an accurate read on the fingerprint., so they probably need to at the very least need to regionally brighten that area of the screen fully on the ambient screen. Someone out there more clever than I will surely figure it out in a way that doesn't compromise security. Hoping it's OnePlus, but we've got an incredible community that can take a swing at it too!
Mine do not have any such feature..
Though the feature is cool I am not happy with the experience. It's not smooth, it shows pattern input screen for a while before showing quick launch menu.
Also the home screen/last app screen before the quick launch and the vibrations (too intense) are also bummer
What version of OxygenOS are you on? I'm on 9.0.3 and I don't seem to have the Quick Launch option?!
Dannyele said:
My "Settings" app carashes when I try to enter on that menu (quick launch)... What should I do?
Click to expand...
Click to collapse
Wait for a fix, I reported this as a bug @ oneplus bughunters. :good:
Huigie said:
Wait for a fix, I reported this as a bug @ oneplus bughunters. :good:
Click to expand...
Click to collapse
Hello mate!
I've already solved this by enabling the apps that I disabled before (like Google Pay, Google Music/Video and a few others). Then, once the quick launch worked, I disabled again those apps. :good:
still waiting for 9.0.4 to have this
raing said:
tmobile version doesn't have this yet. just so everyone knows.
Click to expand...
Click to collapse
TMO variant is missing quite a few other things, to be precise
Dannyele said:
My "Settings" app carashes when I try to enter on that menu (quick launch)... What should I do?
Click to expand...
Click to collapse
by default, the quick launch is set to open a few google apps preinstalled on the device.
If you disabled/removed some of them, but didn't remove them on the quick launch list before that, then it's going to crash every time you open the quick launch setting.
Enable every default app and try again, if it still doesn't work then factory reset and next time remember to remove all apps in this setting before disabling them.
culiacanazo said:
TMO variant is missing quite a few other things, to be precise
Click to expand...
Click to collapse
That's why I keep going back to the intl firmware. Quick launch and OnePlus lab. Phone feels much more premium and snappy with intl

Categories

Resources